LG | 42PG60D | LG 42PG60D Owner’s Manual

PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
4 2 P G 6* *
5 0 P G 6* *
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5277: 42PG60D
5293: 50PG60D
“ This product incorporates copy protection technology that is protected by U.S. and foreign patents,
including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of
Macrovision’s copy protection technology in the product must be authorized by Macrovision. Reverse
engineering or disassembly is prohibited. ”
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
MODE
TV
POWER
TV/RADIO
INPUT
DVD
BRIGHT
VCR
SIMPLINK TEXT
BACK
RATIO
MENU
I/II
INFO i
EXIT
GUIDE
OK
Owner's
Manual
FAV
VOL
PR
MUTE
Owner's manual
1
2
4
5
3
6
7
8
9
LIST
0
Q.VIEW
UPDATE
INDEX
TIME
SLEEP
HOLD
REVEAL
ACCESSORIES
INPUT
D/A
?
SUBTITLE
Owner’s Manual
Power Cord
Batteries
Remote Control
x4
Protection Cover
4-Bolts for stand assembly
(Refer to p.6)
(Only 42PG6**)
(50PG6**)
Cable management clip
Cable Holder
(42PG6**)
Ferrite Core
(This feature is not
available for all models.)
Polishing Cloth
Polishing cloth for use on the
screen.
Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Do not use excessive force. This may
cause scratching or discolouration.
NOT USING THE DESK-TYPE STAND
A
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection
cover for desk-type stand installation.
Use of Ferrite Core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install as close as possible to
the power plug.
1
CONTENTS
ACCESSORIES
.............................................
1
CONTENTS
PREPARATION
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 5
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Please set it up carefully so the product
does not fall over . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back Cover for Wire Arrangement . . . . . . . . . . . . . . 8
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . 9
Wall Mount: Horizontal Installation . . . . . . . . . . . . . 9
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 10
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 11
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . . 18
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 19
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
- Screen Setup for PC mode . . . . . . . . . . . . . . . 23
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . . . . 27
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 30
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 30
On-Screen Menus Selection and Adjustment . . . . 31
Auto Programme Tuning (In Digital Mode) . . . . . . 32
Manual Programme Tuning (In Digital Mode) . . . . 33
Programme Edit (In Digital Mode) . . . . . . . . . . . . . 34
5V Antenna Power(In Digital Mode Only) . . . . . . .36
Booster (In Digital Mode Only) . . . . . . . . . . . . . . . 37
Software Update (In Digital Mode Only) . . . . . . . 38
Diagnostics (In Digital Mode Only) . . . . . . . . . . . . 39
Auto Programme Tuning (In Analogue Mode) . . . . . 40
Manual Programme Tuning (In Analogue Mode) . . . . . . . 41
2
Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . . 42
Assigning a Station Name (In Analogue Mode) . . . . . . 42
Programme Edit (In Analogue Mode) . . . . . . . . . . . . . 43
Selecting the Programme Table . . . . . . . . . . . . . . 45
Input Source Selection . . . . . . . . . . . . . . . . . . . . . 46
SIMPLINK Function . . . . . . . . . . . . . . . . . . . . . . . . 47
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Switch On/Off EPG . . . . . . . . . . . . . . . . . . . . . . . . . 49
Select Programme . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Button Function in NOW/NEXT Guide Mode . . . . . 50
Button Function in 8 Day Guide Mode . . . . . . . . . . 50
Button Function in Date Change Mode . . . . . . . . . . 50
Button Function in Extended Description Box . . . . . 51
Button Function in Remind Mode . . . . . . . . . . . . . . 51
Button Function in Schedule List Mode . . . . . . . . . . 51
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . 52
Preset Picture Settings
- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . . . . . . . 54
- Auto Colour Tone Control (Warm/Medium/Cool) . . . .55
Manual Picture Adjustment
- Picture Mode-User Option . . . . . . . . . . . . . . . . . . . . 56
- Colour Tone - User Option . . . . . . . . . . . . . . . . . . . . .57
XD - Picture Improvement Technology . . . . . . . . . . . . . . 58
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Advanced - Black(Darkness) Level . . . . . . . . . . . . . . . . . . 61
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Image Sticking Minimization(ISM) Method . . . . . . . . . . . 63
Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 64
SOUND & LANGUAGE CONTROL
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Product Specifications . . . . . . . . . . . . . . . . . . . . . 85
Programming the Remote Control . . . . . . . . . . . . 86
Programming Code . . . . . . . . . . . . . . . . . . . . . . . 86
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
External Control Device Setup . . . . . . . . . . . . . . 90
CONTENTS
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 65
Preset Sound Settings - Sound Mode . . . . . . . . . . 66
Sound Setting Adjustment - User Mode . . . . . . . . . . 67
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . 69
Selecting Digital Audio . . . . . . . . . . . . . . . . . . . . . . 70
I/II
- Stereo/Dual Reception (In Analogue Mode Only) . 71
- NICAM Reception (In Analogue Mode Only) . . . . . . . 72
- Speaker Sound Output Selection . . . . . . . . . . 72
Language Selection (In Digital Mode Only) . . . . . .73
APPENDIX
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . 75
Auto Shut-Off Setting . . . . . . . . . . . . . . . . . . . . . 76
Time Zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . 77
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . 77
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . . . . 78
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
TELETEXT
Switch On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 81
3
PREPARATION
FRONT PANEL CONTROLS
A
A
Image shown may differ from your TV.
If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
PREPARATION
Remote Control Sensor
POWER
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
INPUT
INPUT
MENU
INPUT
4
MENU
INPUT
OK
MENU
OK
- VOL +
OK
MENU
- VOL OK
+
- VOL +
PR
PR
PR
VOLUME
PROGRAMME
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
PREPARATION
1
5
2
3
4
OPTICAL
DIGITAL
AUDIO OUT
COMPONENT IN
AUDIO IN
(RGB/DVI)
1
2
VIDEO
(CONTROL & SERVICE)
2
3
AUDIO
1
6
RS-232C IN
RGB IN (PC)
5
9
ANTENNA IN
8
7
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
AUDIO IN (RGB/DVI)
Connect the audio from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
4
Component Input
Connect a component video/audio device to
these jacks.
5
HDMI IN 1/2/3/4
Connect a HDMI signal to HDMI IN or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
6
RGB IN (PC)
Connect the output from a PC.
7
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
8
Antenna Input
Connect RF antenna to this jack.
9
AV (Audio/Video) IN
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
5
PREPARATION
STAND INSTALLATION (only 42PG6**)
A
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
PREPARATION
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
Swivel Stand
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.
6
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT
FALL OVER.
■
■
1
1
2
PREPARATION
■
You should purchase necessary components to fix the TV to the wall on the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will
also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
2
1
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen these bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted
on the wall.
3
3
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall
and the TV.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
7
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
PREPARATION
42PG6**
1
50PG6**
1
Connect the cables as necessary.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
2
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE MANAGEMENT CLIP
Connect the cables as necessary.
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
Fix the C a b l e H o l d e r as
shown and bundle the
cables.
CABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
42PG6**
50PG6**
For the 42PG6**
model, press the
center of the
CABLE MANAGEMENT CLIP and
then lift up it.
! NOTE
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
G
8
Separate CABLE
MANAGEMENT from
TV by pressing two
latches.
■
■
The TV can be installed in various ways such as on a wall or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Power Supply
Circuit
breaker
PREPARATION
Ensure that you connect the earth wire to prevent possible
electric shock. Do not try to earth the TV by connecting it
to telephone wires, lightening rods or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
INPUT
MENU
OK
- VOL +
4 inches
4 inches
PR
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use
a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
9
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
PREPARATION
■
■
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
- 5V antenna power works In Digital
mode only. (Refer to p. 36)
UHF
Antenna
Signal
Amplifier
ANTENNA IN
VHF
■
■
10
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select Component1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
Component2 input source.
1
2
1
Signal
Component
HDMI1/2/3/4
480i/576i
Yes
No
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
1080p
No
Yes
AUDIO
3
COMPONENT IN
VIDEO
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N 1 A U D I O jacks on the TV.
RS-232C IN
2
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
(CONTROL & SERVICE)
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N 1 V I D E O jacks on
the TV.
RGB IN (PC)
1
EXTERNAL EQUIPMENT SETUP
Connecting with a component cable
2
11
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
DIGITAL
AUDIO OUT
(RGB/DVI)
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
Select HDMI2 input source using the I N P U T button
on the remote control.
If connected to H D M I I N 3 (or H D M I I N 4) jack,
select HDMI3 (or HDMI4) input source.
RS-232C IN
2
(CONTROL & SERVICE)
Connect the digital set-top box to H D M I I N 2 jack on
the TV.
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
1
1
HDMI-DTV OUTPUT
Connecting with a HDMI to DVI cable
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
2
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
COMPONE
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
VIDEO
1
2
AUDIO
12
Select HDMI1 input source using the I N P U T button
on the remote control.
RS-232C IN
4
(CONTROL & SERVICE)
RGB IN (PC)
1
DVD SETUP
Connecting with a component cable
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N 1 A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select Component1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
Component2 input source.
5
Refer to the DVD player's manual for operating
instructions.
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
COMPONENT IN
1
2
2
AUDIO
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
1
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N 1 V I D E O jacks on the TV.
VIDEO
1
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
13
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
1
V I D E O jacks between TV and
Connect the A U D I O/V
DVD player. Match the jack colours (Video = yellow, Audio
Left = white, and Audio Right = red)
EXTERNAL EQUIPMENT SETUP
S-VIDEO
2
VIDEO
L
R
Insert a DVD into the DVD player and press PLAY on the
DVD player. (Refer to the DVD player owner’s manual.)
OUTPUT
SWITCH
3
ANT IN
Select AV input source using the I N P U T button on the
remote control.
ANT OUT
1
Connecting with a S-Video cable
1
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV.
VIDEO
2
S-VIDEO
L
R
Connect the audio outputs of the DVD to the A U D I O
input jacks on the TV.
OUTPUT
SWITCH
14
ANT IN
3
Turn on the DVD player, insert a DVD.
4
Select AV input source using the INPUT button on
the remote control.
5
Refer to the DVD player's manual for operating
instructions.
ANT OUT
1
2
Connecting HDMI cable
AUDIO IN
(RGB/DVI)
Select HDMI2 input source using the I N P U T button
on the remote control.
If connected to H D M I I N 3 (or H D M I I N 4) jack,
select HDMI3 (or HDMI4) input source.
1
Refer to the DVD player's manual for operating
instructions.
3
HDMI-DVD OUTPUT
EXTERNAL EQUIPMENT SETUP
2
(CONTROL & SERVICE)
Connect the HDMI output of the DVD to the H D M I
I N 2 jack on the set.
RGB IN (PC)
1
DIGITAL
AUDIO OUT
! NOTE
G
G
The TV can receive video and audio signals simultaneously
when using a HDMI cable.
If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
15
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain
visible.
AUDIO
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
When connecting with a RF Cable
ANTENNA IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
Wall Jack
2
Antenna
16
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
Connecting with a RCA cable
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3
Select AV input source using the I N P U T button on the
remote control.
S-VIDEO
VIDEO
L
R
OUTPUT
SWITCH
ANT IN
ANT OUT
1
EXTERNAL EQUIPMENT SETUP
1
Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV. The picture quality is improved;
compared to normal composite (RCA cable) input.
1
S-VIDEO
Connect the audio outputs of the VCR to the A U D I O
input jacks on the TV.
2
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
4
Select AV input source using the I N P U T button on the
remote control.
L
R
OUTPUT
SWITCH
1
3
VIDEO
ANT IN
ANT OUT
2
! NOTE
G
If both S-VIDEO and VIDEO sockets have been
connected to the S-VHS VCR simultaneously, only
the S-VIDEO can be received.
17
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
- Sending the TV’s audio signal to external audio equipment via
the Digital Audio Output (Optical) port.
3
Set the “TV Speaker option - Off ” in the AUDIO
menu.(G p .69). Refer to the external audio equipment
instruction manual for operation.
1
not look into the optical output port. Looking at the
laser beam may damage your vision.
RS-232C IN
CAUTION
G Do
18
(CONTROL & SERVICE)
2
COMPONENT IN
AUDIO
2
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
VIDEO
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
1
OTHER A/V SOURCE SETUP
Camcorder
VIDEO
L
R
EXTERNAL EQUIPMENT SETUP
Video Game Set
1
1
V I D E O jacks between TV and external equipment. Match the jack colors.
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select AV input source using the I N P U T button on the remote control.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
19
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
VIDEO
AUDIO
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
RS-232C IN
2
(CONTROL & SERVICE)
Connect the RGB output of the PC to the RGB IN
(PC) jack on the TV.
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
1
COMPONENT IN
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
1
2
3
Turn on the PC and the TV.
4
Select RGB input source using the INPUT button on
the remote control.
RGB OUTPUT
AUDIO
Connecting with a HDMI to DVI cable
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
VIDEO
1
3
Turn on the PC and the TV.
4
Select HDMI1 input source using the INPUT button
on the remote control.
DVI-PC OUTPUT
! NOTE
20
G
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
G
If the PC does not support Auto DVI, you need to set the output resolution appropriately.
2
AUDIO
AUDIO
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
RS-232C IN
2
(CONTROL & SERVICE)
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
RGB IN (PC)
1
COMPONENT IN
! NOTE
G To
G Connect
the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
G If using a sound card, adjust PC sound as
required.
G This TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this TV.
G DDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play
functionality.
G If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or HDMI/DVI
IN) to display the PC output on the TV.
G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the
TV to either RGB or HDMI; (the other mode is set
to Plug and Play automatically by the TV.)
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB[PC] cable, there may
be interference on the screen. We recommend
using under 5m of cable. This provides the best
picture quality.
EXTERNAL EQUIPMENT SETUP
enjoy vivid picture and sound, connect a PC to
the TV.
G Avoid keeping a fixed image on the TV’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
G Connect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the resolution.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G We recommend using 1024x768, 60Hz for the
PC mode, these should provide the best picture
quality.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of
the PC to the HDMI IN (or HDMI/DVI IN) port
on the TV.
21
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
RGB[PC] / HDMI[PC] mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
31.469
37.500
37.879
46.875
49.725
48.363
56.476
60.023
47.693
47.649
70.08
59.94
75.00
60.31
75.00
74.55
60.00
70.00
75.03
59.99
59.94
640x480
EXTERNAL EQUIPMENT SETUP
22
800x600
832x624
1024x768
1280x768
1360x768
HDMI[DTV] mode
Resolution
640x480
720x480
720x576
1280x720
1920x1080
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.469
31.469
31.47
31.50
31.25
37.50
44.96
45.00
33.72
33.75
28.125
27.00
56.25
67.433
67.500
59.94
60.00
59.94
60.00
50.00
50.00
59.94
60.00
59.94
60.00
50.00
24.00
50.00
59.94
60.00
Screen Setup for PC mode
BACK
MENU
EXIT
Auto Configure (RGB [PC] mode only)
INFO i
GUIDE
OK
Automatically adjusts picture position and minimizes image
instability. After adjustment, if the image is still not correct, your
TV is functioning properly but needs further adjustment.
FAV
VOL
PR
EXTERNAL EQUIPMENT SETUP
MUTE
1
Auto configure
This function is for automatic adjustment of the screen position,
clock, and phase. The displayed image will be unstable for a few
seconds while the auto configuration is in progress.
1
Press the MENU button and then
select the SCREEN menu.
D
or
E
Press the G button and then
Auto Config..
D
button to
MENU
Prev.
1
Press the G button to start Auto Config..
• When Auto Config. has finished, OK will be shown
on screen.
• If the position of the image is still not correct, try
Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
Manual Config..
4
G
or E button to select
Move
3
3
SETUPO Auto Config.
PICTUREO Manual Config.
AUDIOO XGA Mode
Aspect Ratio
TIMEO
Reset
OPTIONO
SCREEN
2
2
Auto Config.
Manual Config.
XGA Mode
Aspect Ratio
Reset
G
To Set
2 3
Press the EXIT button to return to normal TV viewing.
23
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Phase, Clock, Position
BACK
MENU
INFO i
EXIT
If the picture is not clear after auto adjustment and especially if
characters are still trembling, adjust the picture phase manually.
GUIDE
OK
To correct the screen size, adjust Clock.
FAV
VOL
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
PR
MUTE
1
2
Clock This function is to minimize any vertical bars or stripes
visible on the screen background the horizontal screen
size will also change.
Phase This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
H-Position / V-Position
1
This function is to adjust picture to
left/right and up/down as you prefer.
Press the MENU button and then
select the SCREEN menu.
D
or
E
SETUPO Auto Config.
PICTUREO Manual Config.
AUDIOO XGA Mode
Aspect Ratio
TIMEO
Reset
OPTIONO
button to
SCREEN
2
3
4
5
G
Press the G button and then D or E button to select
Manual Config..
Move
MENU
Prev.
1
Press the G button and then D or E button to select
Phase, Clock, H-Position or V-Position.
Press the F or G button to make appropriate
adjustments.
Auto Config.
Manual Config.
XGA Mode
Aspect Ratio
Reset
G
Phase
Clock
H-Position
V-Position
0
0
0
0
Press the EXIT button to return to normal TV viewing.
2 3
24
3
4
Selecting Wide XGA mode
BACK
INFO i
MENU
EXIT
To view a normal picture, match the resolution of RGB mode
and selection of XGA mode.
GUIDE
OK
This function works in the following mode: RGB[PC] mode
FAV
VOL
PR
EXTERNAL EQUIPMENT SETUP
MUTE
1
1
Press the MENU button and then D or E button to
select the SCREEN menu.
4
G
Press the G button and then D or E button to select
XGA Mode.
Move
3
3
SETUPO Auto Config.
PICTUREO Manual Config.
AUDIOO XGA Mode
Aspect Ratio
TIMEO
Reset
OPTIONO
SCREEN
2
2
MENU
Prev.
1
Press the G button and then D or E button to select
the desired XGA resolution.
Press the EXIT button to return to normal TV viewing.
Auto Config.
Manual Config.
XGA Mode
Aspect Ratio
Reset
G
1024 X 768
1280 X 768
1360 X 768
2
3
25
Initializing
(Reset to original factory settings)
BACK
MENU
INFO i
EXIT
GUIDE
OK
This function operates in current mode.
To initialize the adjusted value
FAV
VOL
PR
EXTERNAL EQUIPMENT SETUP
MUTE
1
1
Press the MENU button and then
select the OPTION menu.
2
Press the G button and then D or E button to select
Factory Mode.
D
or
E
Move
Press the G button and then D or E button to select
Factory Reset.
4
Press the OK button.
The message “If you enter a password, all user
setting will be reset” will appear.
5
3
SETUPO Language
PICTUREO Country
AUDIOO Lock System
Parental Control
TIMEO
Input Label
OPTION G SIMPLINK
SCREENO Factory Mode
button to
3
2
MENU
Prev.
1
Language
Country
Lock System
Parental Control
Input Label
SIMPLINK
Factory Mode
Set ID
1
Factory Reset
OK
ISM Method
G
Normal
Low Power
Off
Use NUMBER buttons to input a 4-digit password.
2
Language
Country
Lock System
Parental Control
Input Label
SIMPLINK
Factory Mode
Set ID
1
Factory Reset
OK
ISM Method
Normal
Low Power
Off
3 4
26
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
INPUT
D/A
MODE
TV
POWER
TV/RADIO
INPUT
DVD
POWER Switches the TV on from standby or off to standby.
D/A INPUT Selects digital or analogue mode.
Switches the TV on from standby.
BRIGHT
VCR
RATIO
I/II
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
Brightness Adjusts screen brightness.
adjustment This returns to the default settings brightness by
changing mode source.
BACK
MENU
EXIT
INFO i
GUIDE
Coloured These buttons are used for teletext (on TELETEXT
buttons models only) or P r o g r a m m e e d i t.
OK
EXIT Clears all on-screen displays and returns to TV viewing
from any menu.
BACK Allows the user to move back one step in an interactive
application, EPG or other user interaction function.
WATCHING TV / PROGRAMME CONTROL
SIMPLINK TEXT
TV/RADIO Selects Radio or TV channel in digital mode.
FAV
VOL
PR
MENU Selects a menu.
INFO i Shows the present screen information.
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
GUIDE Shows programme schedule.
VOLUME UP Adjusts the volume.
/DOWN
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
UPDATE
INDEX
TIME
?
SLEEP
SUBTITLE
HOLD
REVEAL
Programme Selects a programme.
UP/DOWN
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
27
WATCHING TV / PROGRAMME CONTROL
INPUT
D/A
POWER
TV/RADIO
INPUT
MODE Selects the remote operating modes.
MODE
TV
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen. (G p.47)
DVD
BRIGHT
VCR
SIMPLINK TEXT
RATIO
I/II
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
1
1
RATIO Selects your desired picture format.
WATCHING TV / PROGRAMME CONTROL
I/II Selects the sound output.
BACK
MENU
EXIT
INFO i
GUIDE
OK
VCR/DVD Controls some video cassette recorders or DVD players
control buttons when you have already selected DVD or VCR mode button.
Control connected AV devices by pressing the D or E or
F or G, OK buttons and buttons for play, stop, pause,
fast reverse, fast forward, chapter skip.
(The
button does not provide such functions.)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
Right)
FAV
VOL
OK Accepts your selection or displays the current mode.
PR
SLEEP Sets the sleep timer.
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
UPDATE
INDEX
TIME
SLEEP
HOLD
REVEAL
SUBTITLE Recalls your preferred subtitle in digital mode.
1
Installing Batteries
?
SUBTITLE
28
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
INPUT
D/A
MODE
TV
POWER
TV/RADIO
INPUT
DVD
BRIGHT
VCR
SIMPLINK TEXT
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the r / I, INPUT or
PR D or E button on the TV or press the POWER,
INPUT, D/A, PR + or - or NUMBER button on the remote
control and the TV will switch on.
BACK
Note:
■ It will automatically disappear after approx. 30 seconds
unless a button is pressed.
■ Press the BACK button to change the current OSD to
the previous OSD.
■ "Home” mode is the optimal setting for home environments, and is the TV's default mode.
■ "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data, “In Store”
mode initializes the product to the image quality set by
us after a certain period of time.
■ The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
INFO i
GUIDE
OK
Initializing setup
If the OSD (On Screen Display) is displayed on the screen
after turning on the TV, you can adjust Auto programme
tuning.
MENU
EXIT
I/II
FAV
VOL
PR
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
UPDATE
INDEX
TIME
SLEEP
HOLD
REVEAL
WATCHING TV / PROGRAMME CONTROL
1
RATIO
?
SUBTITLE
29
WATCHING TV / PROGRAMME CONTROL
PROGRAMME SELECTION
INPUT
D/A
MODE
TV
POWER
TV/RADIO
INPUT
DVD
BRIGHT
VCR
SIMPLINK TEXT
1
WATCHING TV / PROGRAMME CONTROL
BACK
MENU
EXIT
I/II
INFO i
GUIDE
OK
VOLUME ADJUSTMENT
FAV
VOL
PR
MUTE
1
Press the VOL + or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE
button.
You can cancel this function by pressing the MUTE,
VOL + or - , or I/II button.
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
UPDATE
INDEX
TIME
SLEEP
HOLD
REVEAL
?
SUBTITLE
30
RATIO
Press the P R + or - or NUMBER buttons to select a
programme number.
ON-SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Press the M E N U button and then D or E button to display each menu.
2
Press the G button and then D or E button to select a menu item.
3
Change the setting of an item in the sub or pull-down menu with F or G button.
You can move to a higher level menu by pressing the OK or MENU button.
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
MENU
Prev.
SETUPO Picture Mode
G Colour Temperature
PICTURE
AUDIOO
Advanced
Picture Reset
OPTIONO
Demo
SCREENO
TIMEO
Digital mode only
Move
MENU
Setup MENU
Move
Picture MENU
SETUPO Sound Mode
PICTUREO Auto Volume
AUDIO G Balance
TV Speaker
TIMEO
Digital Audio
OPTIONO
SCREEN
SCREENO
G
Prev.
Move
MENU
Screen MENU
MENU
Prev.
Option MENU
0
Prev.
Audio MENU
SETUPO Clock
PICTUREO Off Time
AUDIOO On Time
Auto Sleep
TIME G
Time Zone
OPTIONO
SETUPO Language
PICTUREO Country
AUDIOO Lock System
Parental Control
TIMEO
Input Label
OPTION G SIMPLINK
SCREENO Factory Mode
Move
Prev.
SETUPO Auto Config.
PICTUREO Manual Config.
AUDIOO XGA Mode
Aspect Ratio
TIMEO
Reset
OPTIONO
MENU
WATCHING TV / PROGRAMME CONTROL
1
SCREENO
Move
MENU
Prev.
Time MENU
31
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
(IN DIGITAL MODE)
BACK
MENU
INFO i
EXIT
GUIDE
OK
Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously
stored service information will be deleted.
FAV
VOL
PR
MUTE
1
WATCHING TV / PROGRAMME CONTROL
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Auto Tuning.
Press the G button to begin auto tuning.
Use NUMBER buttons to input a 4-digit password in
Lock System ‘On’.
The message “All service-information will be
updated. Continue?” will appear.
3
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
3
2
MENU
Prev.
1
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
Start
G
If you want to keep on auto tuning select YES using
the F or G button. Then, press the OK button.
Otherwise select NO.
To stop auto tuning, press the MENU button.
4
Press the EXIT button to return to normal TV viewing.
2
Auto Tuning
0
Programme(s)
0
Programme(s)
UHF CH.
14
24 %
MENU
Stop
3
32
MANUAL PROGRAMME TUNING
(IN DIGITAL MODE)
BACK
MENU
INFO i
EXIT
GUIDE
OK
Manual Tuning lets you manually add a programme to your
programme list.
FAV
VOL
PR
MUTE
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Manual Tuning.
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
3
4
Press the G button and then D or E button or NUMBER buttons to select the desired channel number.
Use NUMBER buttons to input a 4-digit password in
Lock System ‘On’.
Press the OK button to save.
3
MENU
Prev.
1
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
G
Your receiver will
add this channel to
your channel list.
UHF CH.
35
When the channel number you want to add is already
in the programme list, the message “Setup
information for the channel will be
updated. Continue?” will appear.
If you wish to continue manual tuning, select YES
using the F or G button.
WATCHING TV / PROGRAMME CONTROL
1
2
2
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
Your receiver will
add this channel to
your channel list.
UHF CH
D
E
35
Then, press OK. Otherwise select NO.
Search
5
Press the EXIT button to return to normal TV viewing.
3 4
33
WATCHING TV / PROGRAMME CONTROL
BACK
MENU
INFO i
EXIT
PROGRAMME EDIT
(IN DIGITAL MODE)
GUIDE
OK
FAV
When a programme number is skipped, it means that you will be
unable to select it using PR + or - button during TV viewing.
VOL
PR
MUTE
If you wish to select the skipped programme, directly enter the
programme number with the NUMBER buttons or select it in the
Programme edit menu
WATCHING TV / PROGRAMME CONTROL
This function enables you to skip the stored programmes.
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Programme Edit menu.
Press the G button to enter the Programme Edit
menu.
Use NUMBER buttons to input a 4-digit password in
Lock System ‘On’.
4
Select a programme to be stored or skipped with the
D or E or F or G button.
5
Press the BLUE button repeatedly to have the programme skipped or stored.
When programmes are to be skipped, skipped
programme shows in blue and these programmes will
not be selected by the PR + or - buttons during TV
viewing.
6
34
Press the EXIT button to return to normal TV viewing.
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
3
1
MENU
Prev.
1
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
G
To Set
2 3
Mini Glossary
Displayed when a DTV Programme.
Displayed when a Locked Programme.
Displayed when a Radio Programme.
A
Skipping a programme number
Select a programme number to be skipped with the D or E or F or G button.
2
Press the BLUE button. The skipped programme number turns to blue.
3
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing.
If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons
or select it in the programme edit or EPG.
4
A
Press the EXIT button to return to normal TV viewing.
WATCHING TV / PROGRAMME CONTROL
1
Locking a programme (In Lock System On mode only)
1
Select a programme to be locked with the D or E or F or G button.
2
Press the GREEN button. The lock symbol will appear in front of that programme number.
3
Press the GREEN button again to release this function.
Note :
G To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number!
G If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset.
G If you select another programme after releasing a locked programme and then return to the locked programme
within 1 minute, there is no need to input a password to select the locked programme.
A
Selecting favourite programme
1
Select your favourite programme number by pressing D or E or F or G button and then press the FAV
button on your remote control handset.
This will automatically include the selected programme into your favourite programme list.
35
WATCHING TV / PROGRAMME CONTROL
5V ANTENNA POWER
(IN DIGITAL MODE ONLY)
BACK
MENU
INFO i
EXIT
GUIDE
OK
Even if there isn’t a special 5V adapter power in the external
antenna, this function can output 5V in the set.
FAV
VOL
PR
MUTE
1
WATCHING TV / PROGRAMME CONTROL
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then use D or E button to
select 5V Antenna Power.
MENU
Prev.
1
Press the G button and then use D or E button to
select On or Off.
In 5V Antenna Power On, if the set is short-circuit, it will automatically return to Off.
3
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
3
2
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
G
Off
On
The message “Antenna feed overloaded.
Automatically switched off.” will appear.
2 3
4
36
Press the EXIT button to return to normal TV viewing.
BOOSTER
(IN DIGITAL MODE ONLY)
BACK
MENU
INFO i
EXIT
GUIDE
OK
When the interference between programmes appear, select
Booster to Off.
FAV
VOL
PR
MUTE
1
2
3
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Press the MENU button and then D or E button to
select the SETUP menu.
Press the G button and then D or E button to select
Booster.
Move
3
4
MENU
Prev.
1
Press the G button and then D or E button to select
On or Off.
Press the EXIT button to return to normal TV viewing.
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
G
WATCHING TV / PROGRAMME CONTROL
1
2
Off
On
2 3
37
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
(IN DIGITAL MODE ONLY)
BACK
MENU
INFO i
EXIT
GUIDE
OK
Software Update means software can be downloaded through
the digital terrestrial broadcasting system.
FAV
VOL
PR
MUTE
1
WATCHING TV / PROGRAMME CONTROL
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Software update.
3
Press the G button and then D or E button to select
On or Off.
2
3
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
MENU
Prev.
1
• If you select On, a user confirm message box will
be displayed to notify that new software is found.
4
Press the EXIT button to return to normal TV viewing.
* When setting “Software Update”
5
Occasionally, a transmission of updated digital
software information will result in the OSD (On
Screen Display) on the TV screen.
6
Select YES using the F or G button.
The OSD will be disappeared on the TV screen, and
you can watch the current TV viewing.
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
G
Off
On
2 3
? New software(ver. x.xx.x) is available.
Do you want to download?
When you change the TV to standby mode using the
POWER button while watching the TV, it will be started
Software update.
G Turn on the TV in standby mode. The OSD is displayed
on the screen based on Software update
circumstances.
G After the Software update is complete, the System
takes about one minute to restart.
Yes
G
No
5 6
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
38
• After Software Update, you can confirm the updated
software version in Diagnostics menu.
DIAGNOSTICS
(IN DIGITAL MODE ONLY)
BACK
2
Press the G button and then D or E button to
select Diagnostics.
FAV
VOL
4
PR
MUTE
1
2
3
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
5V Antenna Power
TIMEO
Booster
OPTIONO Software Update
SCREENO Diagnostics
Move
3
GUIDE
MENU
Prev.
1
Press the G button to display Manufacturer,
Model/Type, Serial Number and Software Version.
Press the EXIT button to return to normal TV viewing.
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
WATCHING TV / PROGRAMME CONTROL
Press the MENU button and then D or E button to
select the SETUP menu.
INFO i
OK
This function enables you to view information on the
Manufacturer, Model/Type, Serial Number and Software
Version.
This displays the information and signal strength of the
tuned MUX.
This displays the signal information and service name of the
selected MUX.
1
MENU
EXIT
To Set
G
2
Engineering
i Diagnostics
Channel 30
Manufacturer : LG Electronics Inc.
Transmitter
: Digital Finland
Model / Type : 37LC2D-EC
Signal
Strength
Serial No.
: 604KG0000006
53%
Software Version : 1.1.0
Signal Quality
CH 30
100%
CH 34
1 YLE TV1
3 YLE KLASS
5 YLE FST
9 YLE Teema
Menu
Prev.
2 YLE TV2
4 YLE FSR+
8 YLE24
1 YLE PEILE
Back
Select
3
39
WATCHING TV / PROGRAMME CONTROL
BACK
MENU
INFO i
EXIT
AUTO PROGRAMME TUNING
(IN ANALOGUE MODE)
OK
FAV
All stations which can be received are stored by this
method. It is recommended that you use Auto tuning during
installation of this TV.
WATCHING TV / PROGRAMME CONTROL
1
Press the G button and then D or E button to select
Auto Tuning.
3
Press the G button to select System. Select a TV
system with the F or G button;
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa / Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South
Africa)
DK : PAL D/K, SECAM D/K (East Europe / China /
Africa / CIS)
4
VOL
PR
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
Press the MENU button and then D or E button to
select the SETUP menu.
2
GUIDE
TIMEO
OPTIONO
SCREENO
Move
MENU
Prev.
1
Auto Tuning
Manual Tuning
Programme Edit
G
System
Storage From
BG
2
Start
Press the E button to select Storage From.
Select the initial programme number with the F or G
button or NUMBER buttons on the Storage From
menu.
5
Press the E button to select Start.
The station name is stored for stations which
broadcast VPS (Video Programme Service), PDC
(Programme Delivery Control) or TELETEXT data.
If no station name can be assigned to a station, the
channel number is assigned and stored as C (V/UHF
01-69) or S (Cable 01-47), followed by a number.
To stop auto tuning, press the MENU button.
When auto tuning is complete, the Programme
Edit menu appears on the screen.
See the ‘Programme Edit’ section to edit the
stored programme.
40
2 3 4 5
BACK
MENU
INFO i
EXIT
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
GUIDE
OK
FAV
Manual Tuning lets you manually tune and arrange the
stations in whatever order you desire.
VOL
PR
MUTE
Press the G button and then D or E button to select
Manual Tuning.
3
Press the G button to select Storage.
Select the desired programme number with the F or G
button or NUMBER buttons on the Storage menu.
4
3
4
5
6
7
8
9
LIST
0
Q.VIEW
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
Press the MENU button and then D or E button to
select the SETUP menu.
2
2
TIMEO
OPTIONO
SCREENO
Move
MENU
Prev.
1
Press the E button to select System. Select a TV
system with the F or G button;
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa / Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South
Africa)
DK : PAL D/K, SECAM D/K (East Europe / China /
Africa / CIS)
5
Press the E button to select Band. Press the F or G
button to select V/UHF or Cable as required.
6
Press the E button to select Channel. You can
select the desired channel number with the F or G
button or NUMBER buttons.
Auto Tuning
Manual Tuning
Programme Edit
G
Storage
1
System
BG
Band
WATCHING TV / PROGRAMME CONTROL
1
1
V/UHF
1
Channel
Fine
Search
Name
C
01
2 3 4 5
6 7 8 9
If possible, select the channel number directly with
the NUMBER buttons.
7
Press the E button to select Search. Press the F or
G button to commence searching. If a station is
found the search will stop.
8
Press the OK button to store the channel.
9
To store another channel, repeat steps 3 to 8.
10
Press the EXIT button to return to normal TV viewing.
41
WATCHING TV / PROGRAMME CONTROL
FINE TUNING (IN ANALOGUE MODE)
BACK
MENU
INFO i
EXIT
GUIDE
Normally fine tuning is only necessary if reception is poor.
OK
FAV
VOL
PR
WATCHING TV / PROGRAMME CONTROL
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Manual Tuning.
3
Press the G button and then D or E button to select
Fine.
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
4
Press the G button and then F or G button to fine
tune for the best picture and sound.
OPTIONO
5
Press the OK button to store settings.
6
Press the EXIT button to return to normal TV viewing.
TIMEO
SCREENO
Move
MENU
Prev.
1
ASSIGNING A STATION NAME
(IN ANALOGUE MODE)
Auto Tuning
Manual Tuning
Programme Edit
Storage
1
System
BG
Band
V/UHF
1
Channel
Fine
You can assign a station name with five characters to each
programme number.
F G
Search
Name
C
01
Store
1
Press the MENU button and then D or E button to
select the SETUP menu.
2
Press the G button and then D or E button to select
Manual Tuning.
3
Press the G button and then D or E button to select
Name.
2 3 4 5
Auto Tuning
Manual Tuning
Programme Edit
Storage
1
System
BG
Band
V/UHF
Channel
4
42
Press the G button and then D or E button. You can
use the alphabet A to Z, numbers 0 to 9, +/ -, and
blank.
5
Press the F or G button to select the position and
make your choice of the second character, and so on.
6
Press the OK button to store it.
7
Press the EXIT button to return to normal TV viewing.
1
Fine
Search
Name
F
D
E
C
01
G
2 3 4 5 6
PROGRAMME EDIT
(IN ANALOGUE MODE)
BACK
This function enables you to delete or skip the stored programmes.
You can also move some channels to other programme numbers or
copy blank channel data into a selected programme number.
INFO i
GUIDE
OK
SETUP G Auto Tuning
PICTUREO Manual Tuning
AUDIOO Programme Edit
Press the MENU button and then D or E button to
select the SETUP menu.
TIMEO
OPTIONO
2
Press the G button and then D or E button to select
Programme Edit.
3
Press the G button to display the Programme Edit menu.
A
Move
MENU
Prev.
1
Deleting a programme
a
b
A
SCREENO
Select a programme to be deleted with the D or E or
F or G button.
Auto Tuning
Manual Tuning
Programme Edit
G
To Set
WATCHING TV / PROGRAMME CONTROL
1
MENU
EXIT
Press the RED button twice. The selected programme
is deleted, all the following programmes are shifted
up one position.
Copying a programme
2
a
Select a programme to be copied with the D or E or
or G button.
F
b
Press the GREEN button. All the following programmes
are shifted down one position.
43
WATCHING TV / PROGRAMME CONTROL
SIMPLINK TEXT
RATIO
I/II
FAV
VOL
PR
MUTE
BACK
MENU
EXIT
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
INFO i
GUIDE
OK
WATCHING TV / PROGRAMME CONTROL
A
Moving a programme
a
Select a programme to be moved with D or E or F or G button.
b
Press the YELLOW button.
c
Move the programme to the desired programme number with the D or E or F or G button.
d
Press the YELLOW button again to release this function.
A
Skipping a programme number
a
Select a programme number to be skipped with D or E or F or G button.
b
Press the BLUE button. The skipped programme number turns to blue.
c
Press the BLUE button to release the skipped programme.
d
When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the programme edit or table menu.
A
Selecting a Favourite Programme
a
Select your favourite programme number with D or E or F or G button.
b
Press the FAV button.
The selected programme will be added to the favourite programme list.
44
OK
SELECTING THE PROGRAMME TABLE
FAV
VOL
You can check which programmes are stored in the memory
by displaying the programme table.
PR
MUTE
7
8
9
LIST
0
Q.VIEW
Displaying programme LIST
1
Press the LIST button to display the PROGRAMME
LIST menu.
The programme list appears on the screen.
• You may find some blue programmes.
These have been set up to be skipped by auto
programming or in the programme edit mode.
• Some programmes with the channel number shown
in the programme LIST indicate there is no station
name assigned.
D
1
YLE TV1
2
YLE TV2
3
YLE FST
4
YLE 24
5
YLE Teema
6
TV4
7
TV4 Film
8
TV4 400
9
TV4 Plus
10
CNN
E
< In Digital Mode >
Programme List
A
Selecting a programme in the programme list
0
BBC1
1
C 01
C 04
1
Select a programme with the D or E button.
2
3
C 43
2
Press the OK button. The TV switches to the chosen
programme number.
4
C 05
5
BLN 2
6
S 04
7
S 05
8
S 07
9
S 12
A
Paging through a programme list (Digital Mode Only)
1
2
A
Press the PR + or - button repeatedly to turns the
pages.
WATCHING TV / PROGRAMME CONTROL
DTV List
A
< In Analogue Mode >
Press the LIST button to return to normal TV viewing.
Displaying the favourite programme table
Press the FAV button to display the Favourite
Programme table menu.
Mini Glossary
Displayed when the
Favourite Programme.
Displayed when the
Locked Programme.
45
WATCHING TV / PROGRAMME CONTROL
INPUT SOURCE SELECTION
BACK
MENU
INFO i
EXIT
Selects a label for each input source which is not in use.
GUIDE
OK
FAV
VOL
PR
MUTE
1
WATCHING TV / PROGRAMME CONTROL
1
Press the MENU button and then D or E button to select
the OPTION menu.
2
Press the G button and then D or E button to select Input
Label.
4
Press the G button and then D or E button to select the
source.
Press the F or G button to select the label.
3
SETUPO Language
PICTUREO Country
AUDIOO Lock System
Parental Control
TIMEO
Input Label
OPTION G SIMPLINK
SCREENO Factory Mode
Move
3
2
MENU
Prev.
1
Language
Country
Lock System
Parental Control
Input Label
SIMPLINK
Factory Mode
AV
Comp1
Comp2
G
RGB
HDMI1
HDMI2
HDMI3
5
Press the EXIT button to return to normal TV viewing.
HDMI4
2 3 4
46
FUNCTION
BACK
MENU
INFO i
EXIT
GUIDE
OK
This function operates only with devices with the SIMPLINK
logo. Please check the SIMPLINK logo.
FAV
This TV might not function properly when using it with
other products with HDMI-CEC function.
VOL
PR
MUTE
1
2
3
WATCHING TV / PROGRAMME CONTROL
This allows you to control and play other AV devices
connected to the display through HDMI cable without
additional cables and settings.
If you do not require the SIMPLINK menu, select “Off”.
SIMPLINK function is not supported by HDMI IN 3,4 input.
1
Press the MENU button and then
select the OPTION menu.
2
Press the G button and then D or E button to select
SIMPLINK.
D
or
E
SETUPO Language
PICTUREO Country
AUDIOO Lock System
Parental Control
TIMEO
Input Label
OPTION G SIMPLINK
SCREENO Factory Mode
button to
Move
3
4
MENU
Prev.
1
Press the G button and then D or E button to select
On or Off.
Press the EXIT button to return to normal TV viewing.
Language
Country
Lock System
Parental Control
Input Label
SIMPLINK
Factory Mode
G
Off
On
2 3
47
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the D or E or F or G, OK,
buttons.
,
,
,
,
,
and
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
WATCHING TV / PROGRAMME CONTROL
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
SIMPLINK Menu
Press the D or E or F or G button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
1
2
Selected Device
3
V C R p l a y b a c k : control the connected VCR.
3
When no device is connected
(displayed in gray)
4
H D D R e c o r d i n g s p l a y b a c k : control recordings
stored in HDD.
4
5
Audio Out to Home theatre/Audio Out to TV:
Select Home theatre or TV speaker for Audio Out.
5
When a device is connected
(displayed in bright colour)
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above
method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the
remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK.
G When you select or operate a media device with home theatre function, the speaker automatically switches
to home theatre speaker (HT speaker).
G
48
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the
possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available
services. In addition, detailed information about the programme is often available in the EPG (the
availability and amount of these programme details will vary, depending on the particular
broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
The EPG displays the programme details for next 8 days.
1
Press the GUIDE button to switch on EPG.
2
Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.
Select Programme
Programme Guide
1
Press the D or E, F or G, PR + or - button to select
the desired programme, then the OK button, the
popup window to select the function is displayed.
D
6 BBC Channel
DTV
14:30
6 BBC Channel
The Tre
1 BBC ONE
Mona The va...
2 BBC TWO
3 BBC THREE
Racing
14 : 35 3 Apr
15:30 11 Apr
15:00
E
Story Of Tra
The Wild
Animadness...
Thor The Wild Thoo
A BBC News Sports
This is BBC THREE
BBC News
Welcome Welcome To
G
G
G
G
4 BBC NEWS 24
BBC
BBC NEWS
BBC News
G
5 BBCi
BBCi
Racing News
Welcome To
G
7 BBC1 London
Racing
BBC THREE
The Wild Thorr
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
Switch On/Off EPG
G
E
Radio
Mode
TV/RADIO
FAV
Favourite
Date
PR. Change
Manual Timer
INFO
Information
Schedule List
49
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
Button Function in NOW/NEXT Guide Mode
Remote Control Buttons
RED
YELLOW
BLUE
F
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
or G
D or E
PR + or GUIDE/EXIT
TV/RADIO
INFO i
Function
Change EPG mode
Enter Timer Remind setting mode
Enter Timer Remind list mode
Change to the selected channel
Select NOW or NEXT Programme
Select the Broadcast Programme
Page Up/Down
Switch off EPG
Select TV or RADIO Programme
Detail information on or off
Programme Guide
D
6 BBC Channel
DTV
14 : 35 3 Apr
NEXT
NOW
6 BBC Channel
Mona The Vampire
The Wild Thornberrys
1 BBC ONE
Racing From Aintree
BBC News Special
2 BBC TWO
This is BBC THREE
Welcome To BBC THREE
3 BBC THREE
BBC News
BBC News
4 BBC NEWS 24
BBCi
BBCi
5 BBCi
The Story Of Tracy oooo
Animadness
7 BBC1 London
BBC News
BBC News
E
Radio
Mode
TV/RADIO
FAV
Favourite
PR. Change
Manual Timer
Information
Schedule List
Button Function in 8 Day Guide Mode
Remote Control Buttons
RED
GREEN
YELLOW
BLUE
F
or G
D or E
PR + or GUIDE/EXIT
TV/RADIO
INFO i
Function
Change EPG mode
Enter Date setting mode
Enter Timer Remind setting mode
Enter Timer Remind list mode
Change to the selected channel
Select NOW or NEXT Programme
Select the Broadcast Programme
Page Up/Down
Switch off EPG
Select TV or RADIO Programme
Detail information on or off
Programme Guide
D
6 BBC Channel
DTV
14:30
6 BBC Channel
The Tre
1 BBC ONE
Mona The va...
2 BBC TWO
3 BBC THREE
Racing
14 : 35 3 Apr
15:30 11 Apr
15:00
E
Story Of Tra
The Wild
Animadness...
Thor The Wild Thoo
A BBC News Sports
This is BBC THREE
BBC News
Welcome Welcome To
G
G
G
G
4 BBC NEWS 24
BBC
BBC NEWS
BBC News
G
5 BBCi
BBCi
Racing News
Welcome To
G
7 BBC1 London
Racing
BBC THREE
The Wild Thorr
G
E
Radio
Mode
TV/RADIO
FAV
Favourite
Date
PR. Change
Manual Timer
INFO
Information
Schedule List
Button Function in Date Change Mode
Remote Control Buttons Function
GREEN
Switch off Date setting mode
Change to the selected date
Select a date
F or G
Switch off Date setting mode
E
GUIDE/EXIT
Switch off EPG
Programme Guide
D
F
6 BBC Channel
Today G 14:30
The Tre
1 BBC ONE
Mona The va...
2 BBC TWO
3 BBC THREE
Racing
14 : 35 3 Apr
15:30 11 Apr
15:00
E
6 BBC Channel
Story Of Tra
The Wild
Animadness...
Thor The Wild Thoo
A BBC News Sports
This is BBC THREE
BBC News
Welcome Welcome To
G
G
G
G
4 BBC NEWS 24
BBC
BBC NEWS
BBC News
G
5 BBCi
BBCi
Racing News
Welcome To
G
7 BBC1 London
Racing
BBC THREE
E
Date Change
Date Exit
50
INFO
The Wild Thorr
G
Button Function in Extended Description Box
Remote Control Buttons
D or E
INFO i
PR + or GUIDE/EXIT
Function
Text Up/Down
The detail information on or off
Page Up/Down
Switch off EPG
Information
Friends
14 : 35 3 Apr
Mona The Vampire
14:00
15:20
Record
3 Apr
Miss Gotto’s Haunted House/Cry Of the Swamp; Miss Gotto Wail Moves
into a new house, and there’s mysterious wail enanating from the local
sweep Of The Swamp; Miss Gotto Wail Moves in
Download PDF

advertising