LG | RT-20LA33 | LG RT-20LA33 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this
service.
infor-
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Favourite programme
Calling the programme table
9
Setting up
2
Picture adjustment
Picture adjustment
14
Sound adjustment
Sound adjustment
Stereo/Dual reception / NICAM
Sound output selection
15
reception (option)
Time setting
Clock
Off time / On time
17
Other functions
TV and AV modes / Child lock
Blue back (option) / Auto sleep /
18
Sleep
timer
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
20
Connection of external equipment
Aerial socket
DVD in sockets
DTV in sockets
Audio/Video in sockets
Monitor out sockets
S-Video/Audio in sockets (SAV)
Headphone socket
23
Troubleshooting check list
27
Installation
Power
This set
operates
DC
on a
supply provided by
the AC-DC
adaptor,
PR
a
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
VOL
OKMENU
TV/AV
mains to the set
directly. The AC-DC adaptor operates on an AC
supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a. Open the back panel cover.
b. Connect the DC plug of the AC-DC adaptor to the 15V socket of
O
N/
OFF
mains
e
the set.
c.
d.
e.
Connect the AC-DC
adaptor and it's power cord.
Connect the power cord to an AC mains.
Close the back panel cover.
In the event of thunderstorms
mains
plug
anything to
PR
powercuts, please pull
or
VOL
out the
OKMENU
TV/AV
of the AC-DC adaptor and the aerial plug. Do not allow
rest upon or roll over the power cord, and do not place
the monitor where the power cord is
subject
to
ONOF
damage.
c
d
b
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard
as
this may
scratch, mark,
or
damage
the Active Matrix LCD
permanently.
Service
Never
remove
the back
cover
of the set
high voltage and other hazards. If
ly, unplug it and call your dealer.
as
this
expose you to
can
the set does not
operate proper-
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
reception
an
on
the back.
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
or
heat. Also
position to allow a free flow
the ventilation openings on the back cover.
The standing angle can be adjusted as shown
placed
a
ensure
that the
of air. Do not
cover
2
in
13
pictures.
Cleaning
the set before cleaning the face of the LCD Screen. Dust
by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Unplug
the set
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the side
of the set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
8
1
2
1.
MUTE
1
23
4
56
7
89
MENU
3.
0
on
from
directly
a
number.
D / E
(Programme Up/Down)
12 5.
displays
the current mode.
Q.VIEW
returns to the
REVEAL MODE
M
HOLD
or
INDEX
i
selects
UPDATE
PSM
6.
6
a
previously
viewed programme.
favourite programme.
I/II
selects the
language during dual language
output (option).
selects the sound
7
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
(With TELETEXT)
4
select
a menu.
accepts your selection
MIX
I/II
or
OK
11
SIZE
standby
standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
LIST
PR
5
TIME
off to
a programme or a menu item.
switches the set on from standby.
VOL
OK
TEXT
or
selects
SLEEP
PR
Q.VIEW
standby
9
4.
VOL
from
MENU
selects
10
4
on
NUMBER BUTTONS
switches the set
TV/AV
3
POWER
switches the set
2.
handset, please install the bat-
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV
selects TV
clears the
or
AV monitor mode.
menu
switches the set
from the
on
from
screen.
standby.
10. SLEEP
sets the
sleep
timer.
POWER
11. LIST
MUTE
8
1
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
are
details,
models)
or
2
used for teletext.
see
COLOURED BUTTONS
TELETEXT
(option)
:
1
23
4
56
7
89
the 'Teletext' section.
These buttons
are
used for teletext
(only
programme edit.
MENU
TV/AV
0
3
9
10
SLEEP
PR
Battery
installation
4
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
VOL
VOL
OK
The remote control handset is
Q.VIEW
To load the
LIST
PR
11
5
-
I/II
PSM
6
7
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
the
the remote control handset for an
(Without TELETEXT)
5
Location and function of controls
Side
panel
PR
6
VOL
5
9
10
OK
MENUTV/A
432
7
H/P
8
S-VIDEO
VIDEO MONO
L
AUDIO
R
AV
ON/ F
1.
POWER (ON/OFF)
switches the set on from
7.
standby
or
off to
TV/AV
(r)
on.
REMOTE CONTROL SENSOR
clears the menu from the screen.
switches the set on from standby.
9.
HEADPHONE SOCKET
Connect the headphone
MENU
10. AUDIO/VIDEO IN SOCKETS (AV)
Connect the audio/video out sockets of external equipment to these sockets.
selects
4.
POWER/STANDBY INDICATOR
panel
8.
selects TV
3.
Back
illuminates red in standby mode.
illuminates green when the set is switched
standby.
2.
1
or
AV monitor mode.
a menu.
plug
to this socket.
OK
accepts your selection
or
displays
the current
mode.
S-VIDEO/AUDIO IN SOCKETS (SAV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
5.
6.
6
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Connects the audio out sockets of the SVIDEO VCR to the audio sockets as in AV
.
Basic
operation
On and off
1.
2.
3.
Press the POWER, D / E, TV/AV or NUMBER buttons to switch
it on fully.
Press the POWER button. The set reverts to standby mode.
Pull out mains plugs to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
is
plug
replaced in
the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
POWER
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to
adjust
MUTE
the volume.
1
23
4
56
7
89
MENU
TV/AV
0
Quick view
Press the Q.VIEW button to view the last programme you
were
PR
watching.
Note
:
This function works
only
when Favourite programme is
a stored
VOL
OK
VOL
set to Off. Otherwise each press of this button will select
favorite programme.
Q.VIEW
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
F /
G, I/II button.
Auto Demonstration
I/II
To review all the menus programmed in the set, press the OK button of the side panel control for about 10 seconds. To stop auto
demonstration, press any button of the side panel control and
POWER button of the remote control.
On
The
screen
menu
language
can
be
guage. First select
selection
displayed on the
your language.
(option)
screen
1.
Press the MENU button to select the
2.
Press the D / E button to select
Press the OK button.
3.
in your desired lan-
Special menu.
Language.
5.
Press the D / E button to select your desired
Press the OK button.
6.
All the on screen displays will appear in the selected language.
Press the TV/AV button to return to normal TV viewing.
4.
language.
7
On
The
screen menus
takes you step by
The buttons
on screen menu
ming
and
steps
are
setting stages.
also displayed.
step through the programrequired for the operating
Menu selection
press the MENU button to display each menu.
Press the D / E button to select a menu item.
The selected menu item changes from white to red.
3.
Press the F / G button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In AV modes, if you adjust the Station menu, AV modes return
to the TV mode.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
the Start will display in the Auto programme menu.
d.
On some models, the Language or Blue back will not display.
1.
2.
Repeatedly
BG
1
AutoOprogramme
ManualOprogramme
System
StorageOfrom
ProgrammeOedit
FavouriteOprogramme
NormalOSearch
TurboOSearch
()OOKOMENU
()O}{OMENU
MENU
Station
menu
PR
VOL
OK
VOL
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Storage
System
Channel
V
1
BG
UHFOOO1
Fine
{{{
Search
Name
PR
()O}{OOKOMENU
CO01
()O}{O0-9OOKOMENU
Picture
menu
O 0-----
Equalizer
Balance
AVL
0
Off
OO500S069
0100C003OOO600S017
0200C012OOO700S022
0300S066OOO800C009
0400S067OOO900C011
DeleteOOOOCopy
MoveOOOOOOSkip
()OOKOMENU
()O}{OOKOMENU
Sound
menu
Clock
-i-i:i-i-AM
OffOtime
-i-i:i-i-AM
Off
OnOtime
-i-i:i-i-AM
Off
Pr.OO1
UOL.30
Off
()O}{OOKOMENU
Time
()O}{OOKOMENU
Input
ChildOlock
AutoOsleep
Language
menu
TV
Off
Off
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENU
Special
TV programme
8
()OMENU
menu
Setting up
Up
to 100 TV stations
bers
to
TV stations
can be stored in this set by programme numOnce you have preset the stations, you will be able
the D / E or NUMBER buttons to scan the stations you pro-
(0
use
to
99).
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
grammed.
Stations
can
be tuned
Auto programme
using
automatic
or
manual modes.
()OOKOMENU
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
press the MENU button to select the Station
Press the D / E button to select Auto programme.
Press the OK button to display the Auto programme
Repeatedly
menu.
menu.
BG
1
System
StorageOfrom
NormalOSearch
TurboOSearch
()O}{OMENU
1
23
4
56
7
89
MENU
4.
5.
6.
7.
Press the D / E button to select
with the F / G button;
System.
Select
a
TV
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, Only
can
TV/AV
0
system
PR
VOL
OK
VOL
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
8.
Press the OK button to begin auto programming.
System
StorageOfrom
NormalOSearch
TurboOSearch
1
BG
1
CO15
2%
MENU
(Normal Search)
System
StorageOfrom
NormalOSearch
TurboOSearch
1
BG
1
CO38
2%
MENU
(Turbo Search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
()OOKOMENU
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the D / E button to select Manual programme.
Repeatedly
Press the OK button to
display
the Manual programme
menu.
Storage
System
Channel
V
1
BG
UHFOOO1
Fine
1
23
4
56
7
89
{{{
Search
Name
CO01
()O}{O0-9OOKOMENU
MENU
4.
Press the D / E button to select
5.
Select the desired programme number (0 to 99) with the F / G
button or NUMBER buttons. Any number under 10 is entered
TV/AV
0
with
6.
7.
8.
PR
VOL
OK
Storage.
a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select System.
Select
a
TV
system with the
F / G button on the
System pull-
down menu;
BG : (Asia/New
VOL
PR
9.
I
:
DK
:
M
:
Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the OK button.
10. Press the D / E button to select Channel.
11. Press the F / G button to select V/UHF
12.
13.
14.
15.
or Cable on the
Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select Search.
Press the F / G button to commence searching on the Search
pull-down menu. If a station is found the search will stop.
Press the OK button to store it. The display Stored will appear.
Storage
System
Channel
Fine
Search
Name
V
1
BG
UHFOOO1
{{{
CO01
Stored
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV button to return to normal TV
10
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
Press the G button and then D / E button to
4.
the numeric 0 to 9 and the
Select the next position by
5.
6.
alphabet A to Z.
pressing the F /
use a
blank,
+, -,
()OOKOMENU
G button and then
make your choice of the second character, and so on.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Fine
tuning
Normally
fine
tuning
is
only
necessary if
is poor.
reception
2.
the 'Manual programme tuning'
Press the D / E button to select Fine.
3.
Press the F / G
1.
ProgrammeOedit
FavouriteOprogramme
Press the D / E button to select Name.
3.
Station
Menu
AutoOprogramme
ManualOprogramme
1 to 3.
Repeat
steps
1
23
4
56
7
89
1 to 3.
button to fine tune for the best
picture
and
sound.
MENU
Storage
System
Channel
V
Fine
TV/AV
0
1
BG
UHFOOO1
{{{
Search
Name
CO01
PR
()O}{OOKOMENU
VOL
4.
5.
OK
VOL
Press the OK button.
Press the TV/AV button to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
viewing.
yellow number
PR
a
11
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
()OOKOMENU
1.
2.
3.
press the MENU button to select the Station menu.
Press the D / E button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
O 0-----
OO500S069
0100C003OOO600S017
0200C012OOO700S022
0300S066OOO800C009
0400S067OOO900C011
DeleteOOOOCopy
MoveOOOOOOSkip
()O}{OOKOMENU
1
23
Deleting
4
56
1.
2.
7
89
MENU
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
TV/AV
O 0-----
OO500S069
0100C003OOO600S017
0200C012OOO700S022
0300S066OOO800C009
0400S067OOO900C011
0
Delete
PR
VOL
OK
PR
MENU
VOL
Copying
1.
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or F
one
/ G button.
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
O 0-----
OO500S069
0100C003OOO600S017
0200C012OOO700S022
0300S066OOO800C009
0400S067OOO900C011
MoveOOff
()O}{OMENU
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
Favourite programme
1.
2.
3.
Station
Menu
AutoOprogramme
ManualOprogramme
This function lets you select your favourite programmes
directly.
press the MENU button to select the Station menu.
Press the D / E button to select Favourite programme.
Press the OK button to display the Favourite programme
ProgrammeOedit
FavouriteOprogramme
Repeatedly
()OOKOMENU
menu.
Off
()O}{OOKOMENU
4.
5.
6.
7.
8.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 5 programmes.
Press the TV/AV button to return to normal TV viewing.
--
Repeatedly
1
23
4
56
7
89
MENU
TV/AV
0
press the Q.VIEW button to select stored favourite pro-
grammes.
PR
Calling
the programme table
VOL
You can check the programmes stored in the memory
the programme table.
OK
VOL
by displaying
Q.VIEW
PR
LIST
Displaying programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
O 0-----
OO500S069
0100C003OOO600S017
0200C012OOO700S022
0300S066OOO800C009
0400S067OOO900C011
()O}{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the D / E
or F
/ G button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Picture
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
()O}{OOKOMENU
1.
2.
3.
press the MENU button to select the Picture menu.
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly
Contrast
Brightness
Colour
Sharpness
4.
85
95
85
80
Press the OK button to store it for the
The display Stored appears.
picture User.
Press the TV/AV button to return to normal TV
MENU
viewing.
TV/AV
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
PR
VOL
VOL
OK
PR
PSM
14
programmed for good picture reproduction
not be changed.
at the
factory
and
can-
Sound
adjustment
Sound adjustment
Balance
AVL
You
Sound
Menu
Equalizer
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
0
Off
can
Speech
equal
volume level
even
if you
change
2.
press the MENU button to select the Sound menu.
Press the D / E button to select the desired sound item;
Equalizer, Balance or AVL
3.
Press the F / G button to make desired
1.
()OOKOMENU
programmes.
Repeatedly
.
adjustment.
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENU
Press the OK button in
Equalizer
to set the
Press the D / E button to select your
Music, Movie, Speech or User.
To set the Equalizer User,
Equalizer User.
preferred setting ; Flat,
Select User by pressing the D / E button.
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
MENU
TV/AV
a.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
VOL
OK
VOL
PR
Press the TV/AV button to return to normal TV
The sound
optimum
Flat, Music, Movie and Speech
sound
reproduction
at the
factory
viewing.
are
programmed for
changed.
and cannot be
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with a receiver for NICAM reception, the high
quality NICAM (Near Instantaneous Companding Audio Multiplex)
digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
1.
2.
I/II
3.
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal from
speakers.
Audio signal from
speakers.
audio L
input
is sent to left and
right
loud-
audio R
input
is sent to left and
right
loud-
Time
setting
Clock
You must set the time
correctly
before
using
on/off time function.
Clock
-i-i:i-i-AM
OffOtime
-i-i:i-i-AM
Off
OnOtime
Time
Menu
-i-i:i-i-AM
Pr.OO1
UOL.30
Off
1.
2.
3.
4.
5.
6.
press the MENU button to select the Time menu.
Press the D / E button to select Clock.
Press the G button and then press the F / G button to select
the desired timer item (hour, minutes).
Make desired adjustment with the D / E button on the desired
timer item.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
()O}{OOKOMENU
Off time
The off timer
set time.
1.
2.
3.
4.
5.
6.
7.
automatically
switches the set to
standby
at the pre-
press the MENU button to select the Time menu.
Press the D / E button to select Off time.
Press the G button and then press the F / G button to select
the desired timer item (hour, minutes).
Make desired adjustment with the D / E button on the desired
timer item.
Press the G button and then D / E button to select On or Off.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
MENU
TV/AV
PR
VOL
OK
VOL
PR
On time
The on timer automatically switches on at the
desired programme number and volume.
1.
2.
3.
4.
5.
6.
7.
preset time with
press the MENU button to select the Time menu.
Press the D / E button to select On time.
Press the G button and then press the F / G button to select
the desired timer item; --:--, Pr. or VOL..
Make desired adjustment with the D / E button on the desired
timer item.
Press the G button and then D / E button to select On or Off.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Note :
In the event of power interruption (disconnection or power failure), the clock must be reset.
b.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
c.
Once the on or off time is set, these functions operate daily at
the preset time.
a.
17
Other functions
Special
TV
Off
Off
Input
Menu
ChildOlock
AutoOsleep
Language
TV and AV modes
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when a video
or other equipment is connected to the
set.
()O}{OMENU
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
2.
1
23
4
56
7
89
MENU
TV/AV
press the MENU button to select the
Press the D / E button to select Input.
Repeatedly
Special
menu.
3.
Press the F / G button to select
4.
SAV.
The AV mode and external equipments are :
COMPONENT : DVD connected to the DVD/DTV IN sockets of
the set
AV
: VCR connected to the AV sockets of the set
SAV : S-VIDEO VCR connected to the S-VIDEO sockets of the set
Repeatedly press the TV/AV button to return to normal TV view-
TV, COMPONENT, AV
or
ing.
0
Alternatively you
TV/AV button.
can
select the TV
or
AV mode
by pressing
the
PR
VOL
VOL
In AV
mode,
to return to TV
mode, press the
D / E or NUMBER but-
tons.
PR
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
3.
press the MENU button to select the Special menu.
Press the D / E button to select Child lock.
Press the F / G button on the remote control handset to select
4.
On.
Press the TV/AV button to return to normal TV
1.
2.
Repeatedly
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the side panel is pressed while viewing the TV.
Note
:
The
any button
18
display Child lock on will not appear on the screen if
the side panel is pressed while displaying the menus.
on
Other functions
Blue back
(option)
If you select On
on
the Blue back
ground
on
the
appears
screen
pull-down
when there is
menu, the blue backno or
poor
Special
TV
Off
Off
Input
ChildOlock
AutoOsleep
Language
Menu
signal.
()O}{OMENU
2.
press the MENU button to select the
Press the D / E button to select Blue back.
3.
Press the F / G button to select On
4.
Press the TV/AV button to return to normal TV
1.
Repeatedly
Auto
or
Special
menu.
Off.
viewing.
sleep
If you select Auto sleep On the set will automatically switch itself
standby mode approximately ten minutes after a TV station stops
to
broadcasting.
2.
press the MENU button to select the
Press the D / E button to select Auto sleep.
3.
Press the F / G button to select On.
4.
Press the TV/AV button to return to normal TV
1.
Repeatedly
Special
menu.
MENU
TV/AV
viewing.
PR
Sleep
VOL
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
SLEEP
VOL
PR
preset time elapses.
Press the SLEEP button to select the number of minutes. The dis-
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note
a.
:
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
sleep time, repeatedly press the SLEEP button
0 appears.
display
In the event of power interruption (disconnection or power failure), the set releases the preset sleep time.
until the
c.
19
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
a
set
free service broadcast by most TV stations which gives
information on news, weather, television pro-
up-to-the-minute
grammes, share
and many other
prices
topics.
The teletext decoder of this TV
FASTEXT
can support the SIMPLE, TOP and
systems. SIMPLE (standard teletext) consists of a num-
ber of pages which are selected by directly entering the correpage number. TOP and FASTEXT are more modern
sponding
methods
allowing quick
and easy selection of teletext information.
1
23
Switch on/off
4
56
7
89
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
TV/AV
0
Press the TEXT
or
TV/AV button to switch off teletext. The
previous
mode reappears.
PR
SIMPLE text
OK
Page selection
PR
1.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
2.
The D / E button
TEXT
MODE
M
lowing
can
be used to select the
preceding
or
fol-
page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
Programming
M
mode, press the
button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
Using
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
20
coloured button.
the NUMBER buttons, select the page you wish to pro-
a
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The
user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
1
23
Direct page selection
4
56
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
7
89
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
Press the
You
can
button to select the index page.
select the pages which are colour coded
i
tom line with the
along
the bot-
3.
coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
4.
The D / E button
same
INDEX
i
buttons in FASTEXT mode.
lowing
can
be used to select the
preceding
or
fol-
page.
21
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
1
23
4
56
7
89
page.
Press this button
PR
to return to the normal
display.
UPDATE
Displays
0
again
half of the page.
the bottom half of the
the TV
picture
on
the
screen
while
waiting for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the updated teletext page.
HOLD
Stops
TIME
SIZE
the automatic page
PR
text page consists of 2
MIX
stop symbol is displayed
REVEAL
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
HOLD UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
22
again
to exit this function.
RED/GREEN,
D
/ E
or
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment,
are
such
as
equipment
VCRs, camcorders
shown below.
Aerial socket
O
1.
Connect the RF out socket of the VCR to the aerial socket of
2.
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
4.
5.
L
MONO
AUDIO
R
L
VIDEO
AV
on
R
ANT IN
LL 75Ω
VCR
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button
AUDO
MONITOR OUT
the VCR.
DVD in sockets
1.
Connect the DVD
or
Y PB
PR)
output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
of the DVD to the DVD/DTV IN sockets
(Y
PB
PR)
of
the set.
PB
PR
YL
COMPONENT(480i/480p)
H/P
R
S-VIDEO
VIDEO
Connect the audio cable from the DVD to the AUDIO sockets
3.
of the set.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD.
4.
The DVD
playback picture
appears
on
the
(MONO) L
AUDIO
R
VIDEO
L
AUDIO
DVD/DTVIN
2.
AV
MONITOR O
COMPONENT
(DVD/DTV)
screen.
DTV in sockets
1.
Connect the SET TOP
PB
2.
PR)
outputs
to the DVD/DTV IN sockets
(Y
of the set.
Connect the audio cable from the SET TOP to the AUDIO sockets of the set.
3.
Press the TV/AV button to select COMPONENT.
S-VIDEO
VIDEO MONO
L
AUDIO
L
AUDO
R
ANT IN
LL 75Ω
Audio/Video in sockets
1.
VIDEO
R
AV
MONITOR OUT
VCR
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
Press the TV/AV button to select AV
3.
Press the PLAY button
The VCR
on
playback picture
.
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Monitor out sockets
Connect the audio/video in sockets of the other TV
R
H/P
S-VIDEO
VIDEO MONO
L
AUDIO
R
VIDEO
L
AUDIO
R
ANT IN
L L 75Ω
DIO
AV2
MONITOROUT
TV
or
monitor to
MONITOR OUT sockets of the set.
23
Connection of external
equipment
S-Video/Audio in sockets
When
an S-VIDEO VCR to the S-VIDEO
be further improved.
connecting
picture quality will
S-VIDEO
VIDEO
MONO
L
AUDIO
R
VIDEO
L
AUDO
R
1.
ANT IN
(SAV)
socket, the
Connect the S-Video socket of the VCR to the S-VIDEO sock-
LL 75Ω
AV
MONITOR OUT
et of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
3.
sockets of AV
Select SAV by
4.
Press the PLAY button
.
S-VIDEO VCR
The VCR
YL
PB
PR
COMPONENT(480i/480p)
DVD/DTVIN
24
R
H/P
S-VIDEO
VIDEO
MONO
L
AUDIO
R
VIDEO
L
AUDIO
AUDIO
AV
MONITOR OUT
R
can
TV's
speaker
repeatedly.
the VCR.
appears
on
the
screen.
socket
headphone plug
You
the TV/AV button
on
playback picture
Headphone
Insert the
pressing
into the
headphone
socket of the set.
listen to the sound through the headphones and TV's
speaker. To adjust the headphone volume, press the F / G button.
If you press the MUTE button, the sound from the headphone and
are
switched off.
MEMO
MEMO
Troubleshooting check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF