LG | RT-20LA30 | LG RT-20LA30 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0267A
(MF002A,
061M
cover
require
TX)
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Back panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
7
On
(option)
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning
Programme edit
Calling the programme table
9
Setting
Picture adjustment
Picture adjustment
14
Sound adjustment
Sound adjustment
Stereo/Dual reception / NICAM
Sound output selection
15
reception
Other functions
TV and AV modes / Child lock / Auto
Blue back (option) / Sleep timer
Teletext (option)
Switch on/off
SIMPLE text
TOP text (option)
FASTEXT
Special teletext functions
19
Connection of external equipment
Aerial socket
Component in sockets
Audio/Video in sockets
Monitor out sockets
S-Video/Audio in sockets (SAV)
Headphone socket
Speaker out sockets
12V DC out socket
22
Troubleshooting
2
17
sleep
check list
Back
cover
Installation
Power
This set operates on a DC supply provided by the AC-DC adaptor,
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
mains to the set directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
LSE
O
SPEAKER
)
(L,
OPENCLOSE
KER
SPE
)
(R,
OPENCLSE
SPEAKER
(L,)
b
adaptor.
Connect the DC plug of the AC-DC adaptor to the 15V socket of
the set.
b. Connect the AC-DC adaptor and it's power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or powercuts, please pull out the
mains plug of the AC-DC adaptor and the aerial plug. Do not allow
anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is subject to damage.
a.
a
OPENCLOSE
SPE
c
KER
(R,
)
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mark, or damage the Active Matrix LCD
permanently.
TVAV
NUOKOLOLPRPR
ONOF
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This set can be positioned by using the table top stand, pedestal
stand (optional parts) or wall mounting bracket (optional parts).
When you install the set using a wall mounting bracket, fix it carefully so that the TV is secure. Mount the speakers provided on the
TV cabinet as picture right.
T/AVMNUOKOLOLPRPR
ONOFF
CLOSE
OPENCLS
OPENCLS
OPEN
SPEAKER
(L, )
SPEAKER
(L,
)
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
OPENCLS
SPEAKER
(L,
)
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
POWER
MUTE
1
1
23
Before you use the remote control handset,
teries. See the next page.
1.
4
56
7
89
2.
MENU
0
from
standby
or
off to
standby
or
directly
standby.
NUMBER BUTTONS
switches the set
3.
on
from
select
a
number.
MENU
selects
4.
VOL
a menu.
SLEEP
PR
VOL
OK
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set
Q.VIEW
TEXT
MIX
from
standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
on
F / G
LIST
PR
5
INDEX
OK
i
TIME
on
TV/AV
3
4
install the bat-
POWER
switches the set
2
please
accepts your selection
REVEAL MODE
or
displays
the current mode.
M
SIZE
HOLD
UPDATE
5.
Q.VIEW
returns to the
I/II
PSM
previously
viewed programme.
6
6.
I/II
selects the
7
language during dual language
(option).
selects the sound output
7.
4
PSM (Picture Status
recalls your preferred
Memory)
picture setting.
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
on or
off.
TV/AV
selects TV, DVD or AV mode.
clears the menu from the screen.
switches the set
on
from
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
are
For further details,
Note
:
(option)
used for teletext.
see
1
23
4
56
7
89
MENU
TV/AV
0
the 'Teletext' section.
In teletext mode, the
SLEEP, LIST and Q.VIEW buttons
10
are
VOL
+
powered by
two AAA
type batteries.
and
-
)
TEXT
MIX
:
To avoid
marked inside the compartment.
damage from possible battery leakage,
use
remove
12
REVEAL MODE
M
HOLD
I/II
batteries if you do not plan to
extended period of time.
INDEX
i
TIME
SIZE
Note
LIST
PR
11
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
polarity symbols (
VOL
OK
Q.VIEW
installation
The remote control handset is
the
SLEEP
PR
used for teletext function.
Battery
9
UPDATE
PSM
the
the remote control handset for
an
5
Location and function of controls
Front
9
panel
8
7
10
ON/OFF
TV/AV
H/P
S-VIDEO
VIDEO
(MONO)
L
AUDIO
MENU
OK
VOL
VOL
PR
PR
R
AV
23
Back
4
6
5
1
panel
1.
MAIN POWER (ON/OFF)
switches the set on (I) or off
(O).
2.
TV/AV
selects TV, DVD or AV mode.
clears the menu from the screen.
switches the set on from standby.
3.
MENU
selects
4.
a menu.
OK
accepts your selection
or
displays
the current mode.
5.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
7.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
Connect the headphone
plug
standby
mode.
to this socket.
10. AUDIO/VIDEO IN SOCKETS (AV)
Connect the audio/video out sockets of external
these sockets.
equipment
to
S-VIDEO/AUDIO IN SOCKETS (SAV)
Connect the video out socket of an S-VIDEO VCR to the SVIDEO socket.
Connects the audio out sockets of the S-VIDEO VCR to the
audio sockets as in AV.
6
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button (I) to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button (O) to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
NUMBER
MUTE
1
23
4
56
7
89
MENU
adjustment
Press the F / G button to
POWER
TV/AV
0
adjust
the volume.
PR
Quick view
VOL
Press the Q.VIEW button to view the last programme you
OK
were
watching.
Q.VIEW
VOL
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the MUTE, F / G, I/II button.
Auto Demonstration
I/II
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
4.
5.
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
on
the
(option)
screen
in desired
language.
MENU button to select the Station menu.
D / E button to select Language.
OK button.
D / E button to select your desired language.
OK button.
screen displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
the MENU button to display each menu.
Press the D / E button to select a menu item.
The selected menu item changes from white to red.
3. Press the F / G button to change the setting of a menu item or
OK button to display the sub menu.
Note :
In the AV mode, the Station menu is not displayed.
a.
b. In the teletext mode, menus are not displayed.
In some models, the Normal/Turbo search will not display,
c.
the Start will display in the Auto programme menu.
d. In some models, the Blue back will not display in the Special
Repeatedly press
menu.
e.
In
some
models, the Language will not display.
MENU
BG
System
StorageOfrom
AutoOprogramme
ManualOprogramme
1
NormalOsearch
ProgrammeOedit
TurboOsearch
Language
PR
()OOKOMENUOTV
VOL
OK
AVO
()O}{O MENUOTV
AVO
VOL
Station
menu
PR
100
95
85
80
0
Contrast
Brightness
Colour
Sharpness
Tint
()O}{O OKOMENUOTV
AVO
Picture
Channel
V
UHFO1
Fine
{{{
Search
Name
Storage
CO01
1
()O}{O OKOMENUOTV
AVO
menu
OEqualizer
0
OBalance
OAVL
BG
System
Off
0OOOOCR01OOOOOO5OOS R07
1OOCD05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R 12
3OOOOSR02OOOOOO8OOC R 15
4OOOOCR06OOOOOO9OOS R 05
O
OODeleteO O
Copy
OOMoveO OOOOSkip
()OOKOMENUOTV
AVO
()O}{OOKOMENUOTV
Sound
menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
AVO
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENUOTV
AVO
Special
TV programme
8
()OMENUOTV
menu
AVO
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the D / E or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
()OOKOMENUOTV
AV
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly press
BG
System
StorageOfrom
1
23
4
56
7
89
1
NormalOsearch
TurboOsearch
MENU
()O}{OOMENUOTV
4.
5.
6.
7.
In
some
models, you
can
TV/AV
0
Press the D / E button to select System. Select a TV system
with the F / G button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select Normal or Turbo search.
Option:
8.
AV
only
PR
VOL
OK
VOL
PR
select Start.
Note :
a. Turbo search is further faster than Normal search and
in some models, these searches will automatically store all
receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
Press the OK button to begin auto programming.
System
StorageOfrom
BG
1
System
StorageOfrom
NormalOsearch
CO15
NormalOsearch
TurboOsearch
1
TurboOsearch
2%
MENUO
(Normal search)
1
BG
1
CO38
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
TV stations
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
AVO
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Manual programme.
Press the OK button to display the Manual programme
Repeatedly press
menu.
BG
System
1
23
4
56
7
89
Channel
V
Fine
UHFO1
{{{
Search
MENU
Name
VOL
()O}{OOKOMENUOTV
AVO
Press the D / E button to select System. Select
with the F / G button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5.
Press the D / E button to select Channel. Press the F / G
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select Search. Press the F / G button to commence searching. If a station is found the search will
PR
OK
CO01
1
4.
0
VOL
Storage
PR
6.
a
TV
system
stop.
7.
If this station is the
one required, press the D / E button to select
the desired programme number (0 to 99) with
the F / G button or NUMBER buttons. Any number under 10 is
entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button to store it. The display Stored will appear.
Storage. Select
8.
BG
System
Channel
Fine
V
UHFO1
{{{
Search
Name
Storage
CO01
1
Stored
9.
10
To store another station, repeat steps 4 to 8.
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
Fine
1.
fine
tuning
is
only necessary
if
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
viewing.
tuning
Normally
Station
Menu
1 to 3.
Press the D / E button to select Name.
Press the G button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the F button you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
Repeat the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV
2.
TV stations
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Repeat
1
23
4
56
7
89
MENU
TV/AV
0
BG
System
Channel
V
UHFO1
Fine
PR
{{{
Search
Name
Storage
CO01
1
()O}{OOKOMENUOTV
AV
VOL
OK
VOL
PR
3.
4.
5.
Press the F / G button to fine tune for the best picture and
sound.
Repeat the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
The finely tuned programme will be indicated by a yellow number
during programme
selection.
11
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly press
0OOOOCR01OOOOOO5OOSR 07
1OOCD05
OOOO6OOSR 07
2OOOOCR07OOOOOO7OOCR 12
3OOOOSR02OOOOOO8OOCR 15
4OOOOCR06OOOOOO9OOSR 05
1
23
4
56
7
89
OODeleteO O
Copy
OOMoveO OOOOSkip
()O}{OOKOMENUOTV
MENU
TV/AV
Deleting
1.
2.
0
1.
OK
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
PR
VOL
AV
VOL
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
or F
one
/ G button.
position.
PR
Moving
1.
2.
3.
a programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
0OOOOCR01OOOOOO5OOSR 07
1OOCD05
OOOO6OOSR 07
2OOOOCR07OOOOOO7OOCR 12
3OOOOSR02OOOOOO8OOCR 15
4OOOOCR06OOOOOO9OOSR 05
OOMoveRoff
()O}{OMENUOTV
AV
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
can check the programmes stored in the memory
the programme table.
You
Displaying programme
table
Press the LIST button to
display
the
Programme
by displaying
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0OOOOCR01OOOOOO5OOS R07
1OOCD 05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R12
3OOOOSR02OOOOOO8OOC R15
4OOOOCR06OOOOOO9OOS R05
()O}{OOKOMENUOTV
Note
AV
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
Selecting
TV/AV
a
OK
PR
VOL
LIST
The set switches to the chosen programme number.
a programme table
10 programme table pages which contain
Paging through
There
are
grammes.
Pressing the D / E
or F
/ G button
repeatedly
Press the TV/AV button to return to normal TV
100 pro-
turns the pages.
viewing.
13
Picture
Picture
Menu
Picture
100
95
85
80
0
Contrast
Brightness
Colour
Sharpness
Tint
()O}{OOKOMENUOTV
AV
You
can
ness
1.
2.
3.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
the MENU button to select the Picture menu.
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly press
Contrast
Brightness
Colour
Sharpness
Tint
4.
100
95
85
80
0
Press the OK button to store it for the
The display Stored appears.
picture
User.
MENU
Press the TV/AV button to return to normal TV
PR
VOL
VOL
OK
PR
PSM
14
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
Sound
Sound
You
adjustment
Sound
Menu
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer, balance. If you switch AVL to on, the set automatically keeps
on an equal volume level even if you change programmes.
can
Speech
1.
2.
3.
the MENU button to select the Sound menu.
Press the D / E button to select the desired sound item; Equalizer,
Balance or AVL.
Press the F / G button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
OEqualizer
0
OBalance
OAVL
Off
O
()OOKOMENUOTV
AV
Repeatedly press
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENUOTV
AV
MENU
Press the D / E button to select your
preferred setting
;
TV/AV
Flat,
Music, Movie, Speech or User.
To set the Equalizer User,
Select User by pressing the D / E button.
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
a.
Press the TV/AV button to return to normal TV
VOL
OK
VOL
PR
viewing.
The sound Flat, Music, Movie and Speech are programmed for
optimum sound reproduction at the factory and cannot be changed.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
Language
If
selection for dual
language
broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the louda
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
equipped with a receiver for NICAM reception, the high
NICAM
quality
(Near Instantaneous Companding Audio Multiplex)
digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
If your set is
1.
I/II
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
16
Other functions
Special
TV and AV modes
Menu
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
()O}{OMENUOTV
AV
the MENU button to select the Special menu.
Press the D / E button to select Input.
Press the F / G button to select TV, DVD, AV or SAV.
The AV mode and external equipments are :
DVD : COMPONENT connected to the DVD/DTV IN sockets of
Repeatedly press
the set
AV
: VCR connected to the AV sockets of the set
SAV : S-VIDEO VCR connected to the S-VIDEO sockets of the set
To return to TV mode, press the D / E
or
NUMBER buttons.
1
23
4
56
7
89
MENU
Alternatively you
can
select the TV, DVD
or
AV mode
by pressing
TV/AV
0
the TV/AV button.
PR
Child lock
VOL
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
VOL
PR
the MENU button to select the Special menu.
Press the D / E button to select Child lock.
Press the F / G button on the remote control handset to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
17
Other functions
Special
Auto
Menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
sleep
If you select Auto sleep On the set will automatically switch itself
standby mode approximately ten minutes after a TV station stops
to
broadcasting.
()O}{OMENUOTV
AV
1.
2.
3.
4.
the MENU button to select the Special
Press the D / E button to select Auto sleep.
Press the F / G button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Blue back
menu.
(option)
If you select Blue back On, the blue background appears
when there is no or poor signal.
on
1.
menu.
the
screen
MENU
TV/AV
2.
3.
4.
PR
VOL
SLEEP
VOL
PR
the MENU button to select the Special
Press the D/E button to select Blue back.
Press the F / G button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
18
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television proshare
grammes,
prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
23
4
56
7
89
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
TV/AV
0
PR
OK
SIMPLE text
PR
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
TEXT
MODE
M
lowing page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
19
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
1
23
4
56
7
89
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
0
TOP mode.
Direct page selection
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
INDEX
2.
i
3.
4.
lowing page.
20
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
1
23
4
56
7
89
new
0
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
PR
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
is
at the
stop symbol
displayed
top left-hand corner of the
screen and the automatic page change is inhibited.
To continue press this button again.
MIX
TIME
REVEAL
SIZE
HOLD
UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D / E
NUMBER buttons.
change
Press
again
or
to exit this function.
21
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
such
shown below.
equipment,
are
as
VCRs, camcorders
Aerial socket
1.
VIDEO
(MONO) L
AUDIO
VIDEO
R
L
AUDIO
R
L
R
ANT
AV
MONITOR OUT
IN
LL 75Ω
SPEAKER OUT
DC OUT
12V/0.2A
4Ω/3W
2.
3.
VCR
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Component
1.
Y
PB
PR
L
COMPONENT(480/480p)
S-VIDEO
H/P
R
VIDEO
L
(MONO)
AUDIO
R
VIDEO
L
AUDIO
DVD/DTVIN
AV
MONITOR O
2.
3.
4.
COMPONENT
(DVD/DTV)
in sockets
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i/480p) to the
COMPONENT sockets (Y PB PR) of DVD/DTV IN.
Connect the audio cable from the COMPONENT to the AUDIO
sockets of DVD/DTV IN.
Press the TV/AV button to select DVD.
Press the PLAY button o n the COMPONENT.
The COMPONENT playback picture appears on the screen.
Audio/Video in sockets
1.
S-VIDEO
VIDEO(MONO)
L
AUDIO
R
AV
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
4Ω/3W
MONITOR OUT
ANT
IN
L L 75Ω
DC OUT
12V/0.2A
2.
3.
VCR
Connect the audio/video out sockets of the VCR to AV sockets
of the set
Press the TV/AV button to select AV.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket of the set.
Monitor out sockets
Connect the audio/video in sockets of the other TV
MONITOR OUT sockets of the set.
S-VIDEO
VIDEO(MONO)
L
AUDIO
R
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
AV
MONITOR OUT
TV
22
4Ω/3W
ANT
IN
L L 75Ω
DC OUT
12V/0.2A
or
monitor to
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
equipment
(SAV)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
S-VIDEO
VIDEO
(MONO)
L
AUDIO
VIDEO
R
L
AUDIO
R
L
R
ANT
1.
2.
3.
4.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of AV.
Select SAV by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Headphone
MONITOR OUT
IN
L L 75Ω
SPEAKER OUT
AV
DC OUT
12V/0.2A
4Ω/3W
S-VIDEO VCR
socket
PB
Y
PR
L
COMPONENT(480i/480p)
H/P
R
S-VIDEO
VIDEO
(MONO)
AUDIO
L
R
VIDEO
L
AUDIO
AUDIO
R
S
DVD/DTVIN
AV
MONITOR OUT
Insert the headphone plug into the headphone socket of the set.
You can listen to the sound through the headphones and TV's
speaker. To adjust the headphone volume, press the F / G button.
If you press the MUTE button, the sound from the headphone and
TV's speaker are switched off.
Speaker
out sockets
Connect the left/right loud-speakers to the SPEAKER OUT sockets
on the back panel of the set in case of installing speakers detached
from the set.
Note : The speakers provided with the TV can be installed in two
ways; mounted on or detached from the TV cabinet. In case of
being mounted on the TV cabinet, you don't have to connect them
to the SPEAKER OUT sockets using the standard audio cables
O
VIDEO
(MONO)
L
AUDO
R
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
AV
ANT IN
L L 75Ω
DC OUT
12V/0.2A
4Ω/3W
MONITOROUT
provided.
12V DC out socket
Connect the DC
plug
of the wireless AV transmitter (optional
panel of the set.
O
VIDEO
(MONO)
AV
L
AUDIO
R
VIDEO
L
AUDO
MONITOR OUT
R
R
L
SPEAKER OUT
4Ω/3W
ANT
IN
LL 75Ω
DC OUT
12V/0.2A
parts)
to the DC OUT socket on the back
23
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF