LG | RT-20LA60 | LG RT-20LA60 Owner’s Manual

LCD
Colour Television
ΟΩΝΕΡ∏Σ ΜΑΝΥΑΛ
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0437A
(ML012B,
091Y/Z
TX)
a
Χοντεντσ
Ινσταλλατιον
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Remote control handset
Battery installation
Side panel
4
Βασιχ οπερατιον
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function
On screen language selection (option)
7
Ον
8
σχρεεν μενυσ
Menu selection
υπ Τ? στατιονσ
Auto programme tuning
Manual programme tuning
Fine Tuning
9
Σεττινγ
Programme edit
Calling the programme
Πιχτυρε αδφυστμεντ
PSM (Picture Status
Picture adjustment
table
14
Memory)
Σουνδ αδφυστμεντ
15
SSM
(Sound Status Memory)
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
Οτηερ φυνχτιονσ
17
TV and AV modes
Child lock
Auto
sleep
/
Sleep
timer
Τελετεξτ (οπτιον)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
19
Χοννεχτιον οφ εξτερναλ εθυιπμεντ
Aerial socket
Component in sockets
Audio/Video in sockets
S-Video/Audio in sockets (S-VIDEO)
Headphone socket
22
Τρουβλεσηοοτινγ χηεχκ λιστ
2
Βαχκ
χοπερ
Ινσταλλατιον
Ποωερ
This set operates on a DC supply provided by the AC-DC adaptor,
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
mains to the set directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
a
adaptor.
a. Open
the back panel cover.
Connect the DC plug of the AC-DC adaptor to the 15V socket of
the set.
c.
Connect the AC-DC adaptor and it's power cord.
d. Connect the power cord to an AC mains.
e. Close the back panel cover.
In the event of thunderstorms or powercuts, please pull out the
mains plug of the AC-DC adaptor and the aerial plug. Do not allow
anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is subject to damage.
b.
e
b
Ωαρνινγ
d
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
c
permanently.
Σερπιχε
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Αεριαλ
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Λοχατιον
12
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
The standing angle can be adjusted as shown in pictures.
Νοτε
Ωηεν ψου ινσταλλ τηε σετ το υσε τηε ωαλλ
(οπτιοναλ παρτσ), φιξ ιτ χαρεφυλλψ σο ασ νοτ το δροπ.
:
μουντινγ
3
βραχκετ
EO
VID
SVDEO
S
VIDEO
DEO
VI
L/MON
ONO
L/M
O
IO
AUDI
AUD
R
AV3
R
AV3
Χλεανινγ
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Μανυφαχτυρεδ υνδερ λιχενσε φρομ Δολβψ Λαβορατοριεσ.
ανδ τηε δουβλε-Δ σψμβολ αρε τραδεμαρκσ οφ
Λαβορατοριεσ.
Δολβψⓒ
Δολβψ
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the side
of the set.
Ρεμοτε χοντρολ ηανδσετ
10
MUTE
POWER
1
11
TV/AV
MULTIMEDIA
I/II
Before you use the remote control
teries. See the next page.
1.
12
2
LIST
EXIT
ΜΥΤΕ
switches the sound
on or
off.
MENU
13
34
2.
Τ?/Α?
selects the remote
clears the
PR
5
handset, please install the bat-
menu
switches the set
operating
from the
from
on
mode.
screen.
standby.
OK
VOL
VOL
3.
PR
ΛΙΣΤ
displays
4.
123
the programme table.
ΕΞΙΤ
clear all
on-screen
displays
and returns to TV
viewing
from any
menu.
6
456
5.
7
SSM
0
Δ
/
(Προγραμμε Υπ/Δοων)
Ε
selects
a programme or a menu item.
switches the set on from standby.
789
PSM
SLEEP
TEXT
UPDATE
TIME
Φ / Γ
(?ολυμε Υπ/Δοων)
adjusts the volume.
adjusts menu settings.
14
8
ΟΚ
accepts your selection
SIZE
Q.VIEW
15 6.
9
HOLD
or
i
the current mode.
ΝΥΜΒΕΡ ΒΥΤΤΟΝΣ
switches the set
REVEAL
on
from
?
INDEX
displays
MIX
MODE
M
7.
ΣΣΜ
standby
and selects
(Σουνδ Στατυσ Μεμορψ)
preferred sound setting.
recalls your
8.
ΣΛΕΕΠ
sets the
9.
sleep
Θ.?ΙΕΩ
returns to the
(With TELETEXT)
4
timer.
previously
viewed programme.
a
programme.
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
10. ΜΥΛΤΙΜΕΔΙΑ
selects TV or Component mode.
switches the set
on
from
standby.
on
from
standby
11. ΠΟΩΕΡ
switches the set
or
off to
standby.
10
Ι/ΙΙ
12
selects the
language during dual language
sound output (option).
selects the
MUTE
broadcast.
POWER
1
11
TV/AV
13 ΜΕΝΥ
MULTIMEDIA
I/II
12
2
selects
a menu.
LIST
EXIT
MENU
13
3
ΠΣΜ (Πιχτυρε Στατυσ Μεμορψ)
14
recalls your
4
preferred picture setting.
PR
15 ΤΕΛΕΤΕΞΤ ΒΥΤΤΟΝΣ
These buttons
For further
?
:
are
details,
(οπτιον)
5
used for teletext.
see
OK
VOL
VOL
the 'Teletext' section.
PR
Νο φυνχτιον
123
ΧΟΛΟΥΡΕΔ ΒΥΤΤΟΝΣ
These buttons
are
used for teletext
(only
TELETEXT
models)
or
6
programme edit.
456
789
Βαττερψ
ινσταλλατιον
7
The remote control handset is powered by two AAA/Alkaline type batteries. To load the
the remote control
batteries,
turn
handset
over
and open the battery compartment.
Install two batteries as indicated by
the polarity symbols ( + and
)
SSM
0
PSM
14
SLEEP
8
Q.VIEW
9
-
marked inside the
Νοτε
:
Το αποιδ
compartment.
δαμαγε φρομ ποσσιβλε βαττερψ λεακαγε,
βαττεριεσ ιφ ψου δο νοτ πλαν το
εξτενδεδ περιοδ οφ τιμε.
υσε
ρεμοπε
τηε
τηε ρεμοτε χοντρολ ηανδσετ φορ
αν
(Without TELETEXT)
5
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Σιδε πανελ
9
PR
6
VOL
5
S-VIDEO
VIDEO
L/MON
10
OK
AUDIO
R
432
MENU
AV2
TV
AV
1
/I
ON/OFF
R
ΜΟΝΟ
ST
ΣΤΕΡΕΟ
ΔΥΑΛ
78
1.
ΠΟΩΕΡ (
/Ι)
switches the set
on
from
standby
or
off to
8.
2.
Τ?/Α?
ΜΟΝΟ
selects the remote
clears the
menu
switches the set
operating
from the
on
from
ST
mode.
ΣΤΕΡΕΟ
ΔΥΑΛ
screen.
ΜΕΝΥ
POWER/STANDBY indicator
:
MONO indicator
:
STEREO indicator
:
DUAL indicator
a menu.
headphone plug
10. ΑΥΔΙΟ/?ΙΔΕΟ ΙΝ ΣΟΧΚΕΤΣ
ΟΚ
accepts
your selection
or
displays
the current
mode.
to this socket.
(Α?2)
Connect the audio/video out sockets of external
equipment
to these sockets.
Σ-?ΙΔΕΟ/ΑΥΔΙΟ ΙΝ ΣΟΧΚΕΤΣ
Connect the video out socket of
5.
6.
Φ
/
Γ
(?ολυμε Υπ/Δοων)
adjusts the volume.
adjusts menu settings.
Δ
/
Ε
(Προγραμμε Υπ/Δοων)
selects
a programme or a menu item.
switches the set on from standby.
7.
6
on.
ΗΕΑΔΠΗΟΝΕ ΣΟΧΚΕΤ
Connect the
selects
4.
:
standby.
9.
3.
(Λιγητ Εμιττινγ Διοδε) ΔΙΣΠΛΑΨ
brightly when the set is switched
ΛΕΔ
illuminates
standby.
ΡΕΜΟΤΕ ΧΟΝΤΡΟΛ ΣΕΝΣΟΡ
(Σ-?ΙΔΕΟ)
an
S-VIDEO
VCR to the Σ-?ΙΔΕΟ socket.
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
as
in Α?2.
Βασιχ
οπερατιον
Ον ανδ οφφ
1.
2.
3.
Press the ΠΟΩΕΡ, Δ / Ε, Τ?/Α?, ΜΥΛΤΙΜΕΔΙΑ or NUMBER
buttons to switch it on fully.
Press the ΠΟΩΕΡ button. The set reverts to standby mode.
Pull out mains plugs to switch the set off.
Νοτε : Ιφ, ωηιλε τηε σετ ισ σωιτχηεδ ον, τηε μαινσ πλυγ ισ δισχοννεχτεδ τηε σετ ωιλλ σωιτχη το στανδβψ ορ ποωερ ον ωηεν τηε μαινσ
πλυγ ισ ρεπλαχεδ ιν τηε μαινσ ποωερ σοχκετ.
MUTE
Προγραμμε
σελεχτιον
You can select
buttons.
a
programme number with the
?ολυμε
αδφυστμεντ
Press the
Φ
/
button to
Γ
adjust
Δ
/
Ε
or
NUMBER
TV/AV
POWER
MULTIMEDIA
I/II
EXIT
MENU
the volume.
PR
Θυιχκ πιεω
OK
Press the Θ.?ΙΕΩ button to view the last programme you
were
VOL
watching.
VOL
PR
Μυτε φυνχτιον
123
Press the ΜΥΤΕ button. The sound is switched off and the
W appears.
You
can
cancel it
by pressing
the
ΜΥΤΕ,
Φ
/ Γ,
ΣΣΜ, Ι/ΙΙ
display
button.
789
Αυτο Δεμονστρατιον
programmed in the set, press the ΟΚ butcontrol for about 10 seconds. To stop auto
demonstration, press any button of the side panel control and
ΠΟΩΕΡ button of the remote control.
To review all the
ton of the side
456
menus
SSM
0
panel
Τ? Σωιπελ φυνχτιον
You can manually turn TV set at left or right direction by 30
so that the watching degree is suitable for your position.
Ον σχρεεν λανγυαγε σελεχτιον (οπτιον)
The menu can be displayed on the screen in desired
First select your language.
degrees,
M
language.
3.
Press the ΜΕΝΥ button to select the Special menu.
Press the Γ button and then Δ / Ε button to select LANGUAGE.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the ΟΚ or Φ button to select the Special menu.
Press the ΕΞΙΤ button to return to normal TV viewing.
1.
2.
?
language.
7
Ον
σχρεεν μενυσ
Μενυ σελεχτιον
1.
Repeatedly
2.
Press the
item.
Γ
Press the
Γ
3.
press the ΜΕΝΥ button to display each menu.
button and then Δ / Ε button to select a menu
button to
display
the sub
menu
or
the
pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
or
pull-down
menu
with
Φ/ΓorΔ/Ε.
You can move to the higher level menu
Φ button and to move to the lower level
Γ
MENU
button.
Νοτε :
Ιν τηε τελετεξτ μοδε, μενυσ αρε νοτ δισπλαψεδ.
α.
β. Ον σομε μοδελσ, τηε LANGUAGE ωιλλ νοτ δισπλαψ.
STATION
PR
ΧΗ.
OK
VOL
by pressing the ΟΚ or
menu by pressing the
VOL
STATION
AUTOOPROGRAMME
{
SYSTEM
{
MANUALOPROGRAMME
{
STORAGEOFROM
{
PROGRAMMEOEDIT
{
START
{
OBG
OI
ODK
OM
PR
()O{OOKOMENU
Στατιον
()O}{OOKOMENU
μενυ
STATION
PICTURE
ΧΗ.
PSM
{
STORAGE
{
O1
USER
{
SYSTEM
{
OO
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
()O{OOKOMENU
Πιχτυρε
()O}{OOKOMENU
μενυ
SOUND
ΧΗ.
STATION
SSM
{
BALANCE
{
AVL
{
-O
-O
-O
00O-O
-
0500S069
0100C003000600S017
0200C012000700S022
0300S066000800C009
?
0400S067000900C011
DELETEOOOOCOPY
MOVEOOOOOOSKIP
M
()O{OOKOMENU
Σουνδ
()O}{OOKOMENU
μενυ
SPECIAL
ΧΗ.
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
LANGUGE
{
()O{OOKOMENU
Σπεχιαλ
Τ? προγραμμε
8
μενυ
Σεττινγ
υπ Τ? στατιονσ
Up to 200 TV stations can be stored by programme numbers (0 to 199).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Νοτε
:
Ιν
σομε
μοδελσ υπ το 100 Τ? στατιονσ
χαν
STATION
ΧΗ.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
βε στορεδ
()O{OOKOMENU
Αυτο προγραμμε
τυνινγ
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
press the ΜΕΝΥ button to select the Station menu.
Press the Γ button and then Δ / Ε button to select AUTO PROGRAMME.
Press the Γ button to display the AUTO PROGRAMME menu.
Repeatedly
STATION
SYSTEM
{
STORAGEOFROM
{
START
{
EXIT
OBG
OI
ODK
OM
MENU
PR
()O}{OOKOMENU
4.
Press the Γ button. Select a TV system with the
the SYSTEM pull-down menu;
Δ
/
Ε
button
OK
VOL
on
BG
I
DK
M
:
:
:
:
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the ΟΚ or Φ button.
Press the Δ / Ε button to select STORAGE FROM.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the STORAGE
FROM pull-down menu. Any number under 10 is entered with
a numeric TM0∏ (or TM00∏) in front of it, i.e. TM05∏ (or TM005∏) for 5.
8.
Press the ΟΚ button.
9.
Press the Δ / Ε button to select START.
10. Press the Γ button to begin auto programming.
5.
6.
7.
VOL
PR
123
456
789
0
PSM
STATION
SYSTEM
{
STORAGEOFROM
{
START
{
OOCO01O(BG)
777O7OO36%
?
MENU
All receivable stations are stored.
To stop auto programming, press the ΜΕΝΥ button.
When auto programming is completed, the PROGRAMME
EDIT menu appears on the screen. See the 'Programme edit'
section to edit the stored programme.
11. Press the ΕΞΙΤ button to return to normal TV
i
M
viewing.
9
Σεττινγ
STATION
ΧΗ.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
Μανυαλ προγραμμε
τυνινγ
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
()O{OOKOMENU
υπ Τ? στατιονσ
press the ΜΕΝΥ button to select the Station menu.
Press the Γ button and then Δ / Ε button to select MANUAL
PROGRAMME
Press the Γ button to display the MANUAL PROGRAMME
Repeatedly
.
3.
menu.
STATION
EXIT
STORAGE
{
O1
SYSTEM
{
OO
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
MENU
()O}{O OKOMENU
4.
5.
PR
OK
VOL
VOL
PR
6.
7.
8.
123
456
789
9.
10.
0
11.
12.
13.
14.
?
M
15.
Press the Δ / Ε button to select STORAGE.
Press the Γ button to select the programme number. Select the
desired programme number (0 to 199) with the Φ / Γ button or
NUMBER buttons on the STORAGE pull-down menu. Any
number under 10 is entered with a numeric TM0∏ (or TM00∏) in front
of it, i.e. TM05∏ (or TM005∏) for 5.
Press the ΟΚ button.
Press the Δ / Ε button to select SYSTEM.
Press the Γ button. Select a TV system with the Δ / Ε button
on the SYSTEM pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the ΟΚ or Φ button.
Press the Δ / Ε button to select CHANNEL.
Press the Γ button. Press the Δ / Ε button to select V/UHF
or CABLE on the CHANNEL pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric TM0∏ (or
'00') in front of it, i.e. TM05∏ (or TM005') for 5.
Press the ΟΚ or Φ button.
Press the Δ / Ε button to select SEARCH
Press the Γ button. Press the Φ / Γ button to commence
searching on the SEARCH pull-down menu. If a station is found
the search will stop.
Press the ΟΚ button to store it. The display STORED will
appear.
STATION
STORAGE
{
SYSTEM
{
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
{{{{
STORED
16. To store another
station, repeat steps
4 to 15.
17. Press the ΕΞΙΤ button to return to normal TV
10
viewing.
Σεττινγ
υπ Τ? στατιονσ
Ασσιγνινγ α στατιον ναμε
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
Press the
STATION
1 to 3.
/ Ε button to select NAME.
Press the Γ button on the NAME pull-down menu.
Press the Δ button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the position by pressing the Φ / Γ button and then make
your choice of the second character, and so on.
Press the ΟΚ button.
Press the ΕΞΙΤ button to return to normal TV viewing.
Φινε
Δ
ΧΗ.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
()O{OOKOMENU
τυνινγ
EXIT
Normally
fine
is
only
necessary if
reception
the 'Manual programme tuning'
Δ / Ε button to select FINE.
Γ button.
1.
Repeat
2.
Press the
Press the
3.
tuning
steps
MENU
is poor.
1 to 3.
PR
OK
VOL
STATION
STORAGE
{
SYSTEM
{
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
VOL
PR
{{{{
123
}{OOKOMENU
456
4.
5.
6.
/ Γ button to fine tune for the best picture and
sound on the FINE pull-down menu.
Press the ΟΚ button.
Press the ΕΞΙΤ button to return to normal TV viewing.
The finely tuned programme will be indicated by a yellow number during programme selection.
Press the
Φ
789
0
?
M
11
υπ Τ? στατιονσ
Σεττινγ
STATION
ΧΗ.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
Προγραμμε
1.
2.
()O{OOKOMENU
εδιτ
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
3.
press the ΜΕΝΥ button to select the Station menu.
Press the Γ button and then Δ / Ε button to select PROGRAMME EDIT.
Press the Γ button to display the PROGRAMME EDIT menu.
Repeatedly
STATION
-O
-O
-O
00O-O
-
0500S069
0100C003000600S017
0200C012000700S022
0300S066000800C009
0400S067000900C011
DELETEOOOOCOPY
MOVEOOOOOOSKIP
()O}{O OKOMENU
TV/AV
Δελετινγ
EXIT
MENU
Q.VIEW
1.
2.
α
προγραμμε
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
STATION
-O
-O
-O
00O-O
-
PR
0500S069
0100C003000600S017
0200C012000700S022
OK
VOL
0300S066000800C009
VOL
0400S067000900C011
PR
DELETE
MENU
Χοπψινγ
123
1.
2.
456
α προγραμμε
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Μοπινγ
789
1.
2.
3.
0
or Φ
one
/
Γ
button.
position.
α
προγραμμε
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
STATION
-O
-O
-O
00O-O
-
0500S069
0100C003000600S017
0200C012000700S022
0300S066000800C009
0400S067000900C011
MOVEOOFF
?
()O}{O MENU
M
α προγραμμε νυμβερ
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Σκιππινγ
1.
2.
3.
Press the ΕΞΙΤ button to return to normal TV
12
viewing.
Σεττινγ
Χαλλινγ
υπ Τ? στατιονσ
τηε προγραμμε ταβλε
You can check the programmes stored in the memory
the programme table.
Δισπλαψινγ προγραμμε ταβλε
Press the ΛΙΣΤ button to display
by displaying
the PROGRAMME TABLE
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
STATION
-O
-O
-O
00O-O
-
0500S069
0100C003000600S017
0200C012000700S022
LIST
0300S066000800C009
EXIT
0400S067000900C011
()O}{OOKOMENU
Νοτε
α.
β.
PR
:
Ψου μαψ φινδ σομε βλυε προγραμμεσ. Τηεψ ηαπε βεεν σετ υπ το
βε σκιππεδ βψ αυτο προγραμμινγ ορ ιν τηε προγραμμε εδιτ μοδε.
OK
VOL
VOL
PR
Σομε προγραμμεσ ωιτη τηε χηαννελ νυμβερ σηοων ιν τηε προγραμμε ταβλε ινδιχατε τηερε ισ νο στατιον ναμε ασσιγνεδ.
Σελεχτινγ
Select
α
προγραμμε ιν τηε προγραμμε ταβλε
Δ / Ε or Φ / Γ button.
programme with the
Then press the ΟΚ button.
a
The set switches to the chosen programme number.
Παγινγ τηρουγη
There
are
προγραμμε ταβλε
α
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
Press the ΕΞΙΤ
/
or Φ
Ε
or
/
Γ
button
repeatedly
turns the pages.
ΛΙΣΤ button to return to normal TV
viewing.
?
M
13
Πιχτυρε
PICTURE
ΧΗ.
PSM
{
USER
{
αδφυστμεντ
ΠΣΜ (Πιχτυρε Στατυσ
1.
2.
3.
Μεμορψ)
press the ΜΕΝΥ button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
Repeatedly
setting
on
the PSM
()O{OOKOMENU
pull-down
menu.
PICTURE
ΧΗ.
PSM
{
DYNAMIC
USER
{
STANDARD
MILD
GAME
USER
()O}OOKOMENU
4.
5.
Press the ΟΚ or Φ button.
Press the ΕΞΙΤ button to return to normal TV
You
EXIT
MENU
also recall
can
a
desired
viewing.
picture (DYNAMIC, STANDARD,
MILD, GAME or USER) with ΠΣΜ button on the remote control.
The picture DYNAMIC, STANDARD, MILD and GAME are pro-
grammed for optimum picture reproduction
not be changed.
at the
factory
and
can-
PR
Πιχτυρε
OK
VOL
VOL
You
PR
can
ness
αδφυστμεντ
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
1.
Repeatedly
2.
Press the
Γ
press the ΜΕΝΥ button to select the Picture menu.
button and then Δ / Ε button to select USER.
PICTURE
ΧΗ.
PSM
{
USER
{
PSM
CONTRAST
{
BRIGHTNESS
{
COLOUR
{
SHARPNESS
{
TINT
{
()O}{O OKOMENU
3.
Press the
picture
4.
Γ
item
Press the
Γ
button and then
the USER
button.
on
Δ
/
Ε
pull-down
CONTRAST
button to select the desired
menu.
80
?
()O}{O OKOMENU
M
5.
Press the
each sub
You
can
ton and
14
Φ
/
Γ
button to make
appropriate adjustments
on
the
menu.
also select other USER items directly with
them with Φ / Γ button.
Δ
adjust
6.
Press the ΟΚ button to store it for the
7.
Press the ΕΞΙΤ button to return to normal TV
picture USER.
viewing.
/
Ε
but-
Σουνδ
ΣΣΜ
αδφυστμεντ
(Σουνδ Στατυσ Μεμορψ)
SOUND
ΧΗ.
You can select your preferred sound setting; Virtual,
Movie or Speech and you can also adjust the sound
the equalizer.
Flat, Music,
frequency
of
press the ΜΕΝΥ button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
1.
2.
3.
SSM
{
BALANCE
{
AVL
{
Repeatedly
()O{OOKOMENU
SOUND
ΧΗ.
SSM
{
VIRTUAL
0
BALANCE
{
FLAT
AVL
{
MUSIC
MOVIE
SPEECH
USER
{
()O}OOKOMENU
Σουνδ Φρεθυενχψ Αδφυστμεντ
a. Press the Γ button in USER to display the USER sub
EXIT
menu.
MENU
0.1O0.5O1.5O5.0O10OkHz
PR
()O}{O OKOMENU
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the ΟΚ button to store it for the sound USER.
The display STORED appears.
Press the ΕΞΙΤ button to return to normal TV
You
also
VOL
VOL
PR
viewing.
desired sound setting (
VIRTUAL,
FLAT,MUSIC, MOVIE, SPEECH or USER) with ΣΣΜ button on the
remote control. The sound settings
VIRTUAL, FLAT, MUSIC,
MOVIE and SPEECH are programmed for optimum sound reproduction at the factory and cannot be changed.
can
recall
OK
a
: Ιφ ψου πρεσσ τηε ΣΣΜ βυττον αφτερ μακινγ αππροπριατε αδφυστμεντ ον τηε USER συβ μενυ, τηε δισπλαψ USER αυτοματιχαλλψ
αππεαρσ επεν τηουγη ψου ηαπε αλρεαδψ σετ α φαχτορψ πρεσετ σεττινγ;
Νοτε
VIRTUAL, FLAT, MUSIC, MOVIE
Σουνδ
You
ορ
SSM
SPEECH.
αδφυστμεντ
adjust balance, AVL (Auto
ically keeps on an equal volume
can
Volume Leveler). AVL automatlevel even if you change pro-
grammes.
1.
2.
3.
press the ΜΕΝΥ button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; BALANCE or AVL.
Make desired adjustment with the Φ / Γ, Δ / Ε or ΟΚ button
on each pull-down menu.
Repeatedly
?
M
SOUND
ΧΗ.
SSM
{
BALANCE
{
AVL
{ON
OFF
()O}OOKOMENU
4.
Press the ΕΞΙΤ button to return to normal TV
viewing.
15
Σουνδ
αδφυστμεντ
Στερεο/Δυαλ ρεχεπτιον
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II
Μονο σουνδ σελεχτιον
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the Ι/ΙΙ button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the Ι/ΙΙ button twice again.
Λανγυαγε σελεχτιον φορ δυαλ λανγυαγε βροαδχαστ
If a programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the Ι/ΙΙ
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
ΝΙΧΑΜ
ρεχεπτιον (οπτιον)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the Ι/ΙΙ button repeatedly.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
1.
2.
3.
screen.
Σουνδ ουτπυτ σελεχτιον
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the Ι/ΙΙ button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Οτηερ φυνχτιονσ
Τ? ανδ Α? μοδεσ
SPECIAL
ΧΗ.
Iselects the remote operating mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
LANGUAGE
{
set.
Νοτε : Ωηεν α ?ΧΡ ισ χοννεχτεδ πια τηε αεριαλ σοχκετ τηε σετ ισ υσεδ
ιν Τ? μοδε. Σεε τηε TMΧοννεχτιον οφ εξτερναλ εθυιπμεντ∏ σεχτιον.
1.
2.
3.
()O{OOKOMENU
press the ΜΕΝΥ button to select the Special menu.
Press the Γ button and then Δ / Ε button to select INPUT.
Γ
Press the
button and then Δ / Ε button to select TV, AV1,
AV2, S-VIDEO or COMPONENT on the INPUT pull-down
Repeatedly
menu.
SPECIAL
ΧΗ.
TV/AV
INPUT
{
TV
CHILDOLOCK
{
AV1
AUTOOSLEEP
{
AV2
LANGUAGE
{
S_VIDEO
EXIT
MENU
COMPONENT
()O}OOKOMENU
AV1 : VCR connected to the Α?1 sockets of the set
AV2 : VCR connected to the Α?2 sockets of the set
S-VIDEO : S-VIDEO VCR connected to the Σ-?ΙΔΕΟ sockets
of the set
COMPONENT : DVD connected to the DVD/DTV IN socket of
the set
4.
Press the ΕΞΙΤ button to return to normal TV
Alternatively
you
Τ?/Α? button.
In AV
mode,
can
select the TV
to return to TV
or
AV mode
mode, press the
Δ
/
Ε or
VOL
VOL
PR
123
viewing.
by pressing
PR
the
NUMBER but-
tons.
Χηιλδ λοχκ
456
789
SSM
0
PSM
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the ΜΕΝΥ button to select the Special menu.
Press the Γ button and then Δ / Ε button to select CHILD
LOCK.
Press the Γ button and then Δ / Ε button to select ON or OFF
on the CHILD LOCK pull-down menu.
Press the ΕΞΙΤ button to return to normal TV viewing.
Repeatedly
?
i
M
With the lock on, the display CHILD LOCK ON appears on the
screen if any button on the side panel is pressed while viewing the
TV.
Νοτε : Τηε δισπλαψ CHILD LOCK ON ωιλλ νοτ αππεαρ ον τηε σχρεεν
ιφ ανψ βυττον ον τηε σιδε πανελ ισ πρεσσεδ ωηιλε δισπλαψινγ τηε
μενυσ.
17
Οτηερ φυνχτιονσ
Αυτο
SPECIAL
ΧΗ.
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
LANGUAGE
{
σλεεπ
If you select ON on the AUTO SLEEP pull-down menu, the set will
switch itself to standby mode approximately ten min-
automatically
utes after
()O{OOKOMENU
a
TV station
1.
Repeatedly
2.
Press the
3.
4.
stops broadcasting.
press the ΜΕΝΥ button to select the Special menu.
button and then Δ / Ε button to select AUTO
Γ
SLEEP.
Press the Γ button and then Δ / Ε button to select ON
on the AUTO SLEEP pull-down menu.
Press the ΕΞΙΤ button to return to normal TV viewing.
or
OFF
TV/AV
Σλεεπ
EXIT
τιμερ
MENU
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
PR
preset time elapses.
Press the ΣΛΕΕΠ button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
---
VOL
of minutes selected.
PR
Νοτε :
Το πιεω τηε ρεμαινινγ σλεεπ τιμε, πρεσσ τηε ΣΛΕΕΠ βυττον ονχε.
β. Το χανχελ τηε σλεεπ τιμε, ρεπεατεδλψ πρεσσ τηε ΣΛΕΕΠ βυττον
υντιλ τηε δισπλαψ
αππεαρσ.
α.
---
χ.
SLEEP
?
M
18
Ωηεν ψου σωιτχη τηε σετ οφφ, τηε σετ ρελεασεσ τηε πρεσετ
σλεεπ τιμε.
Τελετεξτ
(οπτιον)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
MULTIMEDIA
Σωιτχη ον/οφφ
Press the ΤΕΞΤ button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the ΤΕΞΤ or Τ?/Α?, ΜΥΛΤΙΜΕΔΙΑ button to switch off teletext. The previous mode reappears.
ΣΙΜΠΛΕ τεξτ
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
PR
123
Παγε σελεχτιον
1.
PR
OK
456
789
0
page.
α χολουρ βυττον ιν ΛΙΣΤ μοδε
If the TV is in SIMPLE text, TOP text or FASTEXT
M
button to switch to LIST mode.
Προγραμμινγ
TEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
?
the remote control handset.
MODE
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the ΟΚ button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
coloured button.
buttons, select the page you wish
M
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
19
Τελετεξτ
(οπτιον)
ΤΟΠ τεξτ (οπτιον)
The
user
guide displays
the bottom of the
four
fields-red, green, yellow and blue
MENU
The
at
field denotes the next group
and the blue field indicates the next block.
screen.
yellow
Βλοχκ / γρουπ / παγε σελεχτιον
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Διρεχτ παγε σελεχτιον
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
PR
TOP mode.
PR
ΦΑΣΤΕΞΤ
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
123
Παγε σελεχτιον
456
1.
2.
789
3.
0
Press the
button to select the index page.
select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
You
i
can
buttons in FASTEXT mode.
4.
The
Δ
lowing
?
INDEX
i
20
/
Ε
button
page.
can
be used to select the
preceding
or
fol-
Τελετεξτ
Σπεχιαλ
?
(οπτιον)
τελετεξτ φυνχτιονσ
ΡΕ?ΕΑΛ
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
ΣΙΖΕ
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
ΥΠΔΑΤΕ
Displays the
teletext
PR
TV
picture on
page. The display
of the
corner
screen.
the
screen
When the
while
waiting
for the
new
will appear at the top left hand
is available then
PR
updated page
will change to the page number.
display
Press this button to view the updated teletext page.
123
ΗΟΛΔ
tele-
456
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
789
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
or more
stop symbol is displayed
at the
top left-hand
of the
corner
0
and the automatic page change is inhibited.
To continue press this button again.
screen
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
ΜΙΞ
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
?
ΤΙΜΕ
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
M
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/
Ε
or
to exit this function.
21
Χοννεχτιον οφ εξτερναλ
You
can
connect additional
etc. to your set.
Examples
εθυιπμεντ
such
equipment,
are
as
VCRs, camcorders
shown below.
Αεριαλ σοχκετ
1.
ANT
L
VIDEO(MONO)
IN
AUDIO
DC
R
Connect the RF out socket of the VCR to the aerial socket of
IN(15V)
the set.
LL
AV1
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
?ΧΡ
4.
stored.
5.
Press the ΠΛΑΨ button
Χομπονεντ
1.
Y
ANT IN
LL
PB
PR
L
COMPONENT(480/480p/720p/1080)
DC
R
IN(15V)
the VCR.
ιν σοχκετσ
Connect the COMPONENT video
Pr
AUDIO
DVD/DTVIN
on
or
Y B-Y
R-Y)
to the Δ?Δ/ΔΤ? ΙΝ sockets
2.
Δ?Δ
Πλαψερ
Connect
the
output sockets (Y Cb Cr, Y Pb
of the COMPONENT
audio
(Y
cable
PB
from
(480i/480p/720p/1080i)
of the set.
PR)
the
COMPONENT to
the
Δ?Δ/ΔΤ? ΙΝ ΑΥΔΙΟ sockets of the set.
3.
Press the Τ?/Α?
or
ΜΥΛΤΙΜΕΔΙΑ button to select COMPO-
NENT.
4.
Press the ΠΛΑΨ button
The COMPONENT
on
the COMPONENT.
playback picture
appears
on
the
screen.
Απαιλαβλε φορματ
Resolution
480i
576i
480p
576p 720p
1080i
50Hz
VIDEO(MONO)
ANT IN
LL
L
AUDIO
R
DC
Frequency
IN(15V)
AV1
?ΧΡ
60Hz
Αυδιο/?ιδεο ιν σοχκετσ
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
S-VIDEO
VIDEO
2.
Press the Τ?/Α? button to select AV1
3.
Press the ΠΛΑΨ button
The VCR
L/MON
on
playback picture
or
AV2.
the VCR.
appears
on
the
screen.
AUDIO
R
AV2
?ΧΡ
22
Νοτε : Ιφ ψου ηαπε α μονο ?ΧΡ, χοννεχτ τηε αυδιο χαβλε φρομ τηε
?ΧΡ το τηε ΑΥΔΙΟ Λ/ΜΟΝΟ σοχκετ οφ τηε σετ.
Χοννεχτιον οφ εξτερναλ
Σ-?ιδεο/Αυδιο ιν σοχκετσ
When
connecting
picture quality will
an
(Σ-?ΙΔΕΟ)
S-VIDEO VCR to the Σ-?ΙΔΕΟ
be further
εθυιπμεντ
socket, the
improved.
S-VIDEO
VIDEO
L/MON
1.
Connect the S-Video socket of the VCR to the Σ-?ΙΔΕΟ sock-
AUDIO
R
AV2
et of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the ΑΥΔΙΟ
sockets of the set.
3.
Select S-VIDEO
4.
Press the ΠΛΑΨ button
The VCR
by pressing
on
playback picture
the Τ?/Α? button
Σ-?ΙΔΕΟ ?ΧΡ
repeatedly.
the VCR.
appears
on
the
screen.
Ηεαδπηονε σοχκετ
Insert the
headphone plug to the headphone socket of the set. You
through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the ΜΥΤΕ button, the sound from the headphone and TV's
speaker are switched off.
can
listen to the sound
S-VIDEO
VIDEO
L/MON
AUDIO
R
AV2
23
Τρουβλεσηοοτινγ
χηεχκ λιστ
Σψμπτομσ
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Χηεχκ τηεσε ιτεμσ ανδ τρψ το
τηεσε
αδφυστ
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Download PDF

advertising