English Việt 中文 User Guide FB44(FB44-A0P) As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. As an ENERGY STAR Partner, LG has determined that this product or product models meet the ENERGY STAR guidelines for energy efficiency. ® ® ENERGY STAR is a U.S. registered mark. ® As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, LG has determined that this product or product models meet P/NO: MFL63266208 the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit ; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or ® Partner, deterioration, unplug discontinue use of the andShave cord replaced STAR As an it,ENERGY Partner, Asappliance, an ENERGY TAR®the with an exact replacement part by anthat authorized service center. that this LG has determined thisLG has determined product product models meet orabuse, Protect the power cord or from physical or mechanical such as being twisted, product product models meet TAR®orguidelines for theclosed ENERGY kinked, pinched, in a S door, walkedthe upon. Pay particular attention tofor plugs, STAR® guidelines ENERGY wall outlets, and the point where the cord exits the appliance. energy efficiency. energy efficiency. To disconnect power from the mains, pull out the mains cord plug. When installing The exclamation point within an equilateral triangle is intended to alert ® is a U.S. registered mark. TAR® isthat a U.S. registered mark. ENERGY ENERGY STAR the product,Sensure the plug is easily accessible. the user to the presence of important operating and maintenance ® As an ENERGY STAR Partner, (servicing) instructions in the literature accompanying the product. This is equipped with a portable battery or accumulator. LG has determined thatdevice this WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,product DO NOT way to remove the battery or the battery from the equipment: Remove or productSafe models meet ® guidelines EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. for or battery pack, follow the steps in reverse order than the assembly. the ENERGY STARthe old battery energy efficiency. To prevent contamination of the environment and bring on possible threat to human ® Partner, S As an E NERGY TAR WARNING : Do not install this equipment in a confined space such as a book case and animal health, the old battery or the battery put it in the appropriate container LG has determined thisregistered a U.S. mark. ENERGY STAR® is that or similar unit. product or product models meet at designated collection points. Do not dispose of batteries or battery together with ® other waste. It is recommended that you use local, free reimbursement systems the ENERGY STAR guidelines for CAUTION : This product employs a Laser System. energy efficiency. batteries and accumulators. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit requireEmaintenance, an NERGY STAR® iscontact a U.S. registered mark. authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. Welcome to your New DVD MICRO Hi-Fi SYSTEM Contents Setting up Player Remote control OSD initial language settings - optional Initial settings the Area Code - optional Adjusting the general settings Setting the Clock Displaying disc information Playing a Disc or file TV sound EZ setup Listening to the radio Listening to music from your portable player Using an USB device Recording to USB Playing the iPod Language Codes Area Codes Troubleshooting Types of Playable Discs Specifications 4 5 6 7 7 8-9 9 10 10-12 12 13 14 14 15 16 17 17 18 19 20 Setting up Connecting your unit to your TV and aerials. 1 Connect the FM aerial. The reception will be at its best when the two loose ends of the aerial are in a straight and horizontal line. 2 C onnect the AM loop aerial to the unit. (Optional) 3 Video Out connection Connect the VIDEO OUTPUT(MONITOR) jack on the unit to the corresponding input jack on your TV using a Video cable. Componenet Video connection Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) OUTPUT jacks on the unit to the corresponding input jacks on your TV using a Y PB PR cable. 4 Plug the unit plug into a wall socket. Player USB Port You can play video, image and sound files by connecting the USB device. iPod Dock Z (OPEN / CLOSE) Open/ Close the disc door. The disc door is opened or closed automatically. Don’t touch the disc door while opening or closing. PORT IN. For connecting a portable device and listening to sound of it through this system’s speakers. PHONES Headphone jack FUNC. (Function) Selects the function. LG EQ You can choose fixed sound impression. CLOCK (See “Setting the Clock” ) TIMER (See the “Using your player as an alarm clock”) SET Confirms the settings. VOL -/+ Volume control 1/] (Power) Turn the unit on and off. Disc Door B/X Play / Pause ./> Scanning/ Tuning/ Searching x STOP/DEMO Stop/ Press DEMO in power off state to demonstrate the function on display window. USB REC. Recording to USB. Remote control RETURN (O) : Moving backwards in the menu or exited the setup menu. REC (z) : USB Direct Recording STOP (x) : Stops playback or recording. PLAY (B), MO./ST. : Starts playback. Selects Mono/ Stereo. PAUSE/STEP (X) : Pause playback SKIP (./ >) : Go to next or previous chapter/ track/ file. SCAN (bb/BB) : Search backward or forward. TV Control buttons : Controls the TV. (LG TV only) Controlling the TV. You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH (+/–) button repeatedly until the TV turns on or off. PROG./MEMO. : Accesses or removes Program menu. CLEAR : Removes a track number on the Program List. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. System Select - Optional FUNCTION : Selects the function and input source. SLEEP : You can select delay time between 10 and 180 minutes, after the player will turn off. To check the remaining time, press SLEEP. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.) 1 POWER : Switches the unit ON or OFF. Z OPEN/CLOSE : Opens and closes the disc Drawer. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. DISPLAY : Accesses On-Screen Display. MENU : Accesses the menu on a DVD disc. SETUP : Accesses or removes setup menu PRESET (U u) : Selects programme of Radio. TUN. (-/+) : Tunes in the desired radio station. U u I i (left/ right/ up/ down): Used to navigate onscreen displays. ENTER : Acknowledges menu selection. TVtSPK : To select the AUX OPT directly. REPEAT/RANDOM : To select a play mode. (random/ repeat) MUTE : To mute the sound. VOL (Volume) (+/-) : Adjusts speaker volume. EQ/ LG EQ (Equalizer effect) : You can choose sound impressions. SUBTITLE : During playback, you can select a desired subtitle language. 0-9 numerical buttons : Selects numbered options in a menu. You must select the appropriate system mode for your TV system. If “NO DISC” appears in the display window, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system. (PAL/ NTSC) Put the battery into the remote control. Make sure that the + (plus) and - (minus) on the battery match those on the remote control. OSD initial language settings - Optional During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. Initial settings the Area Code Optional When you use this unit for the first time, you have to set the Area Code as shown below. ON REMOTE ON REMOTE 1 T urn the power on The language list appears. 2 Select the language POWER IiUu 3 Press ENTER 4 To confirm press ENTER 1 Display setup menu 2 Select LOCK menu on the first level SETUP Uu 3 Move to second level The activated Area Code appears on the second level. i 4 Move to the third level i 5 Enter a new password Numeric (0-9) and ENTER 6 Recheck the entered new password Numeric (0-9) and ENTER 7 S elect a code for a geographic area After select, Rating and Password will be activated. UuIi 8 T o confirm what you press Make sure to finish setting the Area Code. ENTER Display Mode – If you selected 4:3, you’ll need to define how you would like wide screen programs and films to be displayed on your TV screen. Adjusting the general settings [Letterbox] ON REMOTE 1 Display setup menu 2 Select a desired option on the first level 3 Move to the second level 4 Select a desired option on the second level 5 Move to the third level 6 Change the setting SETUP Uu i Uu i Uu, ENTER Adjusting the general settings - more you can do Adjusting the language settings [Panscan] This displays a wide screen picture with black bands at the top and bottom of the screen. This fills the entire 4:3 screen, cropping the picture as necessary. Adjusting the audio settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. Adjusting the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. 1 Enter a 4-digit password then press ENTER. 2 Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. OSD (Menu Language) – Select a language for the Setup menu and on-screen display. Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 17. Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc Subtitle/ Disc Menu. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. [Original] Refers to the original language in which the disc was recorded. [Other] To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (Page 17). If you make a mistake before pressing ENTER, press CLEAR. [Off] (for Disc Subtitle) Turn off Subtitle. Adjusting the display settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3] [16:9] Select when a standard 4:3 TV is connected. Select when a 16:9 wide TV is connected. Password – Sets or changes the password for lock settings. [New] [Change] Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. Enter the new password twice after entering the current password. If you forget your password you can reset it. 1 Remove the disc in the unit. 2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared. Adjusting the others settings Setting the Clock DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER and you can view the registration code of the unit. 1 Turn the power on Enjoying a pre-programmed sound field 2 Press for at least 2 seconds The system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ/ LG EQ. The displayed items for the Equalizer may be different depending on sound sources and effects. 3 Choose from either AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) NATURAL You can enjoy comfortable and natural sound. Local specialization equalizer Regionally optimized sound effect. (DANGDUT/ ARABIC/ PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SALSA/ SAMBA) AUTO EQ Realizes the sound equalizer that is the most similar to the genre of which is included in the MP3 ID3 tag of song files. POP CLASSIC JAZZ ROCK This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock pop, jazz or classic concert. MP3 OPT This function is optimized for compressible MP3/WMA file. It improves the bass sound. XDSS ON Reinforce the treble, bass and surround sound effect. VIRTUAL You can enjoy more virtual surround sound. NORMAL You can enjoy the sound without equalizer effect. ON UNIT 4 Confirm your selection 5 Select the hours 6 Press 7 Select the minutes 8 Press 1/] CLOCK ./> SET ./> SET ./> SET Using your player as an alarm clock 1 Turn the power on. 2 Press TIMER. Each functions flashes. 3 Press SET when the function you want to be woken by is showing. 4 “ON TIME” will be displayed. This is where you set the time you want the alarm to start. Use ./> to change the hours and minutes and SET to save. 5 The “OFF TIME” will be displayed. This is where you set the time you want the function to stop. 6 Use ./> to change the hours and minutes and press SET to save. 7 You will be shown the volume (VOL) you want to be woken by. Use ./> to change the volume and SET to save. The clock icon “ ” shows that the alarm is set. 8 Press TIMER button 2times. You can check the setting status. Notes: • If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off. ” by pressing • If you set the clock time and alarm, you can check the alarm icon “ CLOCK even when the player is turned off. Displaying Disc information Playing a Disc or file ON REMOTE 1 Press DISPLAY ON REMOTE Z OPEN/CLOSE 1 Insert a disc on unit 2 Select an item Uu 2 Select a DVD/CD 3 Adjust the display menu settings Ii 3 A djust the menu settings / Select a file from the menu 4 To return the exit O RETURN Displaying Disc Information - more you can do You can select an item by pressing U u and change or select the setting by pressing I i. Current title (or track/ file) number/ total number of titles (or tracks/ files) Current chapter number/ total number of chapters Elapsed playing time Selected audio language or channel JPG MP3 files WMA files Audio CDs B PLAY/ENTER 5 To stop the disc playing x STOP Playing a Disc or file - more you can do DVD Skipping to the next/ previous chapter/ track/ file MP3 WMA DVD DivX ACD Press SKIP (>) to move to the next chapter/ track/ file. Press SKIP (.) to return to the beginning of the current chapter/ track/ file. Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file. Symbol Used in this Manual DVD DivX 4 Start the disc playing Most DVDs now have menus which load first before the film begins to play. 1 You can navigate these menus using U u I i to highlight an option. 2 Press ENTER to select. Selected sound/EQ mode ALL IiUu Playing a DVD that has a menu Selected subtitle Selected angle/ total number of angles All discs and file listed below DVD and finalized DVD±R/RW DivX files JPEG files FUNCTION MP3 WMA ACD Pausing playback ALL 1 Press PAUSE/STEP (X) to pause playback. 2 Press PLAY (B) to continue playback. Frame-by-Frame playback DVD DivX Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame. Playing repeatedly or randomly MP3 WMA DVD DivX ACD Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will be played back repeatedly or randomly. To return to normal playback, press REPEAT/RANDOM repeatedly. - Random play mode : only music files. 10 Fast forward or fast reverse MP3 WMA DVD DivX ACD Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. Slow down the playing speed DVD While playback is paused, press SCAN (bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. 1.5 times faster playback DVD Press PLAY (B) when a DVD is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. “B x1.5” will appear in the screen. Press PLAY (B) again to return to normal playback speed. Selecting a subtitle language DVD DivX During playback, press SUBTITLE repeatedly to select a desired subtitle language. Changing the character set to display DivX® subtitle correctly DivX 1 If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds to display the language code menu. 2 Press SUBTITLE repeatedly to change the language code until the subtitle is displayed properly. Viewing the Title menu DVD Creating your own program MP3 WMA ACD You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. The program is cleared when the disc is removed. 1 Select a desired music then press PROG./MEMO. or select “ “ and then press ENTER to add the music to the program list. 2 To add all music in the disc, select “ ” and then press ENTER. 3 Select a music from the program list then press ENTER to start programmed playback. 4 To clear a music from the program list, select the music you want to clear then press CLEAR or select “ ” icon and then press ENTER. To clear all music from the program list, select " " then press ENTER. Displaying file information (ID3 TAG ) MP3 While playing an MP3 file containing file information, you can display the information or time by pressing DISPLAY repeatedly. Viewing photo files as a slide show JPG 1 Use U u I i to highlight ( ) icon then press ENTER to start slide Show. 2 You can change slide show speed using I i when ( ) icon is highlighted. Skipping to the next/ previous photo JPG Press SKIP (. or >) or I i to view the previous/ next photo. Rotating a photo JPG Press TITLE to display the disc's title menu, if available. Use U u to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Starting play from selected time Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG DVD DivX Searches for the starting point of entered time code. 1 Press DISPLAY then select clock icon. 2 Enter a time then press ENTER. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons and press ENTER. if you enter the wrong number, press CLEAR to enter again. Last Scene Memory When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together, you can select menu of files which you would like to play by pressing MENU. DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off (Standby mode) the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. 11 Playable file requirement DivX • Available resolution: within 800x600 (W x H) pixels • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as “ _ ” mark on the display. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted. • Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx” • Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt) • Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX” • Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA” • For Discs formatted in Live file system, you can not it on this player. • If the name of movie file is different from that of the subtitle file, during playback of a DivX file, subtitle may not be display. • If you play a DivX file differ from DivX spec, it may not operate normally. MP3/ WMA • Sampling frequency : within 32 - 48 kHz (MP3/ WMA) • Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA) • File extensions : “.mp3”/ “.wma” • CD-ROM file format : ISO9660 LEVEL 1 / JOLIET • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. JPG • • • • Normal: 5120 x 3840, Progressive jpeg: 2043 x 1536 Recording condition: ISO9660 LEVEL 1/ JOLIET Maximum files : Under 999. Some discs may not operate due to a different recording format or the condition of disc. • File extensions: “.jpg” 12 TV sound EZ setup You can enjoy to sound from TV, DVD and Digital Device. Even in power off mode, if you press TVtSPK, then power is on and automatically changed to AUX OPT mode. ON REMOTE 1 Connect the unit’s OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc). 2 Select the AUX OPT To select the AUX OPT directly. TVtSPK 3 Enjoy sound 4 To escape from AUX OPT TVtSPK Listening to the radio Be sure that the aerials are connected. ON REMOTE 1 Select FM or AM(optional) 2 Select a radio station 3 To save a radio station A preset number will show in the display. 4 S elect the preset number Up to 50 radio stations can be saved. 5 To confirm press FUNCTION TUN.- / + PROG./MEMO. PRESET Uu PROG./MEMO. Listening to the radio - More you can do Looking for radio stations automatically Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station. Deleting all the saved stations 1P ress and hold PROG./MEMO. for two seconds. - “ERASE ALL” will flash up on the display. 2 Press PROG./MEMO. to erase all saved radio stations. Improving poor FM reception Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner from stereo to mono and usually improve the reception. 13 Listening to music from your portable player Using an USB device The unit can be used to play the music from many types of portable player. ON REMOTE 1 C onnect the portable player to the PORT.IN (PORTABLE IN) connector of the unit. You can enjoy media files saved on an USB device by connecting it to the USB port of the unit. If you want to operate other function, see the CD playback section. ON REMOTE 1 C onnect the USB device to the USB port of the unit. 2 Select the function 3 Select a file you want to play 3 S elect the function Turn on the portable player and start it playing. 1 POWER FUNCTION Uu 4 Start your media playing B PLAY 5 To stop, press x STOP 6 B efore disconnecting, you have to change to any other function 2 Turn the power on FUNCTION FUNCTION Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that supports USB 2.0 or USB 1.1. • The USB function of this unit does not support all USB devices. USB device requirement •Devices which require additional program installation when you have connected it to a computer, are not supported. Look out for the follows • Do not extract the USB device while in operation. • For a large capacity USB, it may take longer than a few minute to be searched • To prevent data loss, back up all data. •If you use a USB extension cable or USB hub, the USB device is not recognized. •Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.) • This unit is not supported when the total number of files is 1000 or more. •External HDD, Card readers, Locked devices, or hard type USB devices are not supported. •USB port of the unit cannot be connected to PC. • The unit can not be used as a storage device. 14 When you are recording, look out for the following Recording to USB ON REMOTE 1 C onnect the USB device to the USB port of the unit. 2 S elect a mode in which you want to record (ex. CD/ TUNER/ ...) Play a sound source first If you want to record desired music file in disc to USB, play a file before starting the recording. FUNCTION 3 Start the recording z REC 4 To stop, press x STOP •You can check the recording percentage rate for the USB record on the screen during the recording. (AUDIO, MP3/ WMA CD only) •During recording MP3/ WMA, there is no sound. •When you stop recording during playback, the file that has been recorded at that time will be stored. (AUDIO CD Only) •Do not remove the USB device during USB recording. If not, an incomplete file may be made and not deleted on PC. •If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window. •Multi card reader device or External HDD can not be used for USB recording. • A file is recorded by 2 hours when you record for a long term. • When you stop recording during playback, the file will not be stored. • In the state CD-G disc, USB record is not operated. • You may not record more than 999 files. •The file number is saved automatically. • It’ll be stored as follows. AUDIO CD MP3/ WMA The other sources. Recording to USB - more you can do Recording Music file in disc source to USB One track recording If the USB recording is started during playback of the CD, the one track/ file would be recording into the USB. All tracks recording If the recording button is pressed at the CD stop, all tracks/ files would be recording. The files in the sub-folders are not recorded during all track recording. Program list recording USB records after creating your own program if you want to record the track you want (AUDIO CD Only). The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights 15 Playing the iPod - more you can do Playing the iPod Pausing playback For detail refer to iPod guide. iPod mode: You can operate your iPod by using the supplied remote control and directly control on your iPod. OSD iPod mode: You can operate your iPod by controlling OSD menu on the TV screen with supplied remote control. The controls on your iPod are not operational in the OSD iPod mode. Press PAUSE/STEP (X) or PLAY (B) to pause playback. Press PAUSE/STEP (X) or PLAY (B) to continue playback. Skipping to the next/previous file Press SKIP (>) to move to the next file. Press SKIP (.) to return to the beginning of the current file. Press SKIP (.) twice briefly to step back to the previous file. Fast forward or fast reverse Audio files: During playback, press and hold SCAN (m / M) and then release at a point you want. Playing repeatedly ON REMOTE iPod message 1 Open the iPod dock 2 C onnect your iPod to the dock. 3 S elect the iPod or OSD iPod function 4 S elect the menu If you want to move backwards in the menu, press MENU. 5 Select a file Uu and ENTER Uu B PLAY 7 To stop the file playing x STOP 9 Remove the iPod 16 FUNCTION 6 Start the file playing 8 Before disconnecting the iPod, change to any other function by pressing Press REPEAT/RANDOM repeatedly to select an item to be repeated. The current file will be played back repeatedly. To return to normal playback, press REPEAT/RANDOM repeatedly. (On video files, this function is not available.) FUNCTION “Please, check your iPod” - If the power of your iPod is insufficient or the iPod is misconnected or unknown device. Reset the iPod if the iPod is not operating normally (Refer to http://www.apple.com/support/) “Connect Video Out(only composite) from the HTS to the TV and switch TV input accordingly.”, “Please, Control through an iPod’s display.” - When you connect the unit and TV to COMPONENT VIDEO OUT, connect the unit and TV to VIDEO OUT. Compatible iPod • When the unit is connected with dock connector may result in malfunctions. • Compatibility with your iPod may vary depending on the type of your iPod. • Depending on your iPod’s software version, it may not be possible to control your iPod from the unit. We recommend installing the latest software version. When you use iPod, look out for the following • Interference may happen depending on iPod devices. • The video files are outputted only when you connect the unit to VIDEO OUT. Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose an area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW 17 Troubleshooting PROBLEM CAUSE No Power The power cord is disconnected. No Picture The TV is not set to receive the DVD signal. CORRECTION The video cables are not connected securely. Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. The DVD picture quality is poor. The disc is dirty. Clean the disc using a soft cloth with outward strokes. A DVD/CD will not play. No disc is inserted. Insert a disc. An unplayable disc is inserted. Insert a playable disc (check the disc type, colour system and regional code). The disc is inserted upside down. Place the disc the side you can see the printed side. The menu is open on screen. Press SETUP to close the menu screen. There is a parental lock which prevents the playback of Enter your password or change the rating level. DVDs with a certain rating. Humming noise heard while a DVD or CD is playing. The disc is dirty. Clean the disc using a soft cloth with outward strokes. The unit is located too close to the TV, causing feedback. Move the unit and audio components further away from your TV. Radio stations can’t be tuned in properly. The antenna is positioned or connected poorly. Check the antenna connection and adjust its position. Attach an external aerial if necessary. The remote control doesn’t work well / at all 18 The signal strength of the radio station is too weak. No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). The remote is not pointed directly at the unit. Tune to the station manually. The remote is too far from the unit. There is an obstacle in the path between the remote control and the unit. The battery in the remote control is flat. Use the remote within 23 feet (7m) of the unit. Preset some radio stations. Point the remote directly at the unit. Remove the obstacle. Replace the battery with new one. About the x Symbol Display Types of Playable Discs Type “x” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc. LOGO DVD-VIDEO : Discs such as movies that canbe purchased or rented. DVD-R : Video mode and finalized only DVD-RW : Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R : Video mode only Supports the double layer disc also DVD+RW : Video mode only Audio CD : Music CDs or CD-R/ CD-RW in music CD format that can be purchased. This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles, DivX, MP3,WMA and/ or JPEG files. Some DVD±RW/ DVD±R or CD-RW/ CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Regional Codes This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”. • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/ Live File System : Disc format system for Windows Vista) 19 Specifications General Power supply Refer to the label attached on the bottom of the unit. Power consumption Refer to the label attached on the bottom of the unit. Net Weight 4.9 kg External dimensions (WxHxD) 694 x 180 x 185 mm Operating temperature 5 °C - 35 °C Operating humidity 5 % - 85 % Output power 20 W + 20 W T.H.D 10 % Tuner FM Tuning Range 87.5 - 108.0 MHz or 87.50 - 108.00 MHz AM Tuning Range 522 - 1620 kHz or 522 - 1710 kHz or 520 - 1710 kHz DVD/CD Frequency response 40 - 20000 Hz Signal-to-noise ratio 70 dB Dynamic range 50 dB Designs and specifications are subject to change without prior 20 iPod is a trademark of Apple Inc., registered in the U.S. and other countries. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project