FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 1 ENGLISH User Guide FB164 (FB164-A0M, FBS164V) As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries. P/NO : MFL62755705 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING : Do not install this equipment in a confined space such as a book case or similar unit. CAUTION : This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. 2 CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit ; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. This device is equipped with a portable battery or accumulator. Safe way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 3 Welcome to your New DVD MICRO Hi-Fi SYSTEM Contents Setting up Main Unit Remote control OSD initial language settings - Optional Initial settings the Area Code - Optional Adjusting the general settings Setting the Clock TV sound EZ setup Displaying disc information Playing a Disc or file Listening to the radio Using a Bluetooth wireless technology Listening to music from your portable player Using an USB device Recording to USB Playing the iPod Language Codes Area Codes Troubleshooting Types of Playable Discs Specifications 4 5 6 7 7 8-9 10 10 11 11-13 14 14-15 16 16 17 18 19 19 20 21 22 Precautions in using the touch buttons • Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. • Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. • Touch the button that you want to work in order to operate the function correctly. • Be careful not to have any conductive material such as metallic object on the touch buttons, and it can cause malfunctions. 3 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 4 Setting up Connecting your unit to your TV and aerials. a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables. Check the jacks of your TV and choose the A, B connection. Picture quality improves in order from A to B. Component Video connection (B) Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) OUTPUT jacks on the unit to the corresponding input jacks on your TV using a Y PB PR cable. - If your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] in [Display] setup to [On] (See page 8). PB MONITOR PR Y MENT COMPO VIDEO E SCAN) RESSIV (PROG T OUT PU + Stretch the FM aerial. The reception will be at its best when the end of the aerial is stretched to be in a straight line and horizontal. Fit the AM loop aerial to its stand Connect the AM loop aerial to the unit. b Plug the unit plug into a wall socket. 4 NNA OPTIC AL IN Video Out connection (A) Connect the VIDEO OUTPUT(MONITOR) jack on the unit to the corresponding input jack on your TV using a Video cable. ANTE Connect the speaker cables to the player To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad. Connect the black end of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus). FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 5 Main Unit TOP FUNC. (Function) Selects the function. iPod Dock 1 /]] (Power) Turn the unit on and off. USB REC. Recording to USB. Disc Slot • Do not push a disc forcibly into the CD slot. • Do not pull or push a disc while a disc is ejected. • Press Z again to reinsert the disc after ejecting it. • pick it to the CD slot with the label side toward Z Ejects or insert the disc from slot loader. USB Port FRONT Display Window EQ/ DEMO You can choose fixed sound impression. Press DEMO in power off state to demonstrate the function on display window. To cancel it, press 1 /]] or DEMO again. CLOCK (See “Setting the Clock” ) TIMER (See the “Using your player as an alarm clock”) VOL + VOL x STOP Stop ] II / ii ] Scanning/ Tuning/ Searching B/X Play/ Pause VOL +/Volume control - SET Confirms the settings. PORTABLE IN For connecting a portable device and listening to sound of it through this system’s speakers. PHONES Headphone jack 5 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 6 Remote control RETURN (O) : Moving backwards in the menu or exited the setup menu. REC (z) : USB Direct Recording STOP (x) : Stops playback or recording. PLAY (B), MO./ST. : Starts playback. Selects Mono/ Stereo. PAUSE/STEP (X) : Pause playback SKIP (./>) : Go to next or previous chapter/ track/ file. bb/BB) : Search backward or forward. SCAN (b FUNCTION : Selects the function and input source. SLEEP : You can select delay time between 10 and 180 minutes, after the player will turn off. To check the remaining time, press SLEEP. (Dimmer : Press SLEEP once. Dims the LED (Light-emitting diode) of front panel by half in power-on status.) 1 POWER : Switches the unit ON or OFF. Z OPEN/CLOSE : Opens and closes the disc Drawer. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. DISPLAY : Accesses On-Screen Display. TV Control buttons : Controls the TV. (LG TV only) Controlling the TV. You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH (+/–) button repeatedly until the TV turns on or off. PROG./MEMO. : Accesses or removes Program menu. CLEAR : Removes a track number on the Program List. MENU : Accesses the menu on a DVD disc. SETUP : Accesses or removes setup menu PRESET (U u) : Selects programme of Radio. TUN. (-/+) : Tunes in the desired radio station. U u I i (up/ down/ left/ right ): Used to navigate onscreen displays. ENTER : Acknowledges menu selection. tSPK : To select the AUX OPT directly. TVt MUTE : To mute the sound. VOL (Volume) (+/-) : Adjusts speaker volume. EQ/ LG EQ (Equalizer effect) : You can choose sound impressions. Put the battery into the remote control. Make sure that the + (plus) and - (minus) on the battery match those on the remote control. 6 REPEAT/RANDOM : To select a play mode. (repeat/ random) SUBTITLE : During playback, you can select a desired subtitle language. 0-9 numerical buttons : Selects numbered options in a menu. FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 7 OSD initial language settings - Optional Initial settings the Area Code - Optional During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. When you use this unit for the first time, you have to set the Area Code as shown below. ON REMOTE ON REMOTE 1 Display setup menu 1 Turn the power on The language list appears POWER 2 Select LOCK menu on the first level SETUP Uu i 2 Select the language IiUu 3 Press ENTER 3 Move to second level The activated Area Code appears on the second level. 4 To confirm press ENTER 4 Move to the third level i 5 Enter a new password Numeric (0-9) and ENTER 6 Recheck the entered new password Numeric (0-9) and ENTER 7 Select a code for a geographic area After select, Rating and Password will be activated. UuIi 8 To confirm what you press Make sure to finish setting the Area Code. ENTER 7 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 8 Adjusting the display settings Adjusting the general settings ON REMOTE 1 Display setup menu 2 Select a desired option on the first level 3 Move to the second level 4 Select a desired option on the second level 5 Move to the third level 6 Change the setting SETUP Uu i Uu i U u, ENTER Adjusting the general settings - more you can do Adjusting the language settings OSD (Menu Language) – Select a language for the Setup menu and onscreen display. Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc Subtitle/ Disc Menu. [Original] : Refers to the original language in which the disc was recorded. [Other] : To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (Page 19). If you make a mistake before pressing ENTER, press CLEAR. [Off] (for Disc Subtitle) : Turn off Subtitle. 8 TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3] Select when a standard 4:3 TV is connected. [16:9] Select when a 16:9 wide TV is connected. Display Mode – If you selected 4:3, you’ll need to define how you would like wide screen programs and films to be displayed on your TV screen. [Letterbox] This displays a wide screen picture with black bands at the top and bottom of the screen. [Panscan] This fills the entire 4:3 screen, cropping the picture as necessary. Progressive Scan (For Component Video connections) – Selects whether the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off]. If you set Progressive Scan to [On] in error, you must reset the unit. First, remove the disc in the unit. Next, press and hold STOP for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 9 Adjusting the audio settings Adjusting the others settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER and you can view the registration code of the unit. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. Adjusting the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. 1 Enter a 4-digit password then press ENTER. 2 Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 19. Rating – Select a rating level. The higher the level is, the stricter the rating. Select [Unlock] to deactivate the rating. Password – Sets or changes the password for lock settings. [New] Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change] Enter the new password twice after entering the current password. If you forget your password you can reset it. 1 Remove the disc in the unit. 2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared. Enjoying a pre-programmed sound field The system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ/ LG EQ. The displayed items for the Equalizer may be different depending on sound sources and effects. NATURAL You can enjoy comfortable and natural sound. Local specialization equalizer Regionally optimized sound effect. (DANGDUT/ ARABIC/ PERSIAN/INDIA/ REGUETON/ MERENGUE/ SAMBA/ SALSA) AUTO EQ Realizes the sound equalizer that is the most similar to the genre of which is included in the MP3 ID3 tag of song files. POP CLASSIC JAZZ ROCK This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock pop, jazz or classic concert. MP3 OPT This function is optimized for compressible MP3/WMA file. It improves the bass sound. XDSS ON Reinforce the treble, bass and surround sound effect. VIRTUAL You can enjoy more virtual surround sound. NORMAL You can enjoy the sound without equalizer effect. 9 11/4/09 4:41 PM Page 10 Setting the Clock TV sound EZ setup ON UNIT 1 Turn the power on 2 Press for at least 2 seconds 3 Choose from either AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4 Confirm your selection 5 Select the hours 1 /]] You can enjoy to sound from TV, DVD and Digital Device. Even in power off mode, if you press TVtSPK, then power is on and automatically changed to AUX OPT mode. CLOCK ] II / ii ] SET ON REMOTE 1 Connect the unit’s OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc). PR MONITOR FB164-A0M_DSGPLLK_ENG_5705 ] II / ii ] Y ENT VIDEO COMPOM 6 Press 7 Select the minutes 8 Press SSIVE (PROGRE SCAN) OUT PUT SET + ] II / ii ] SET OPT ANTEN ICAL IN NA Using your player as an alarm clock 1.Turn the power on. 2 Press TIMER. Each functions flashes. 3 Press SET when the function you want to be woken by is showing. 4 “ON TIME” will be displayed. This is where you set the time you want the alarm to start. Use ] I I / i i ] to change the hours and minutes and SET to save. 5 The “OFF TIME” will be displayed. This is where you set the time you want the function to stop. 6 Use ] I I / i i ] to change the hours and minutes and press SET to save. 7 You will be shown the volume (VOL) you want to be woken by. Use ] I I / i i ] to change the volume and SET to save. Switch the system off. The clock icon “ ” shows that the alarm is set. 8 When the system is turned off you can check the time the alarm and turn the alarm on and off by pressing TIMER. Note • If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off. • If you set the clock time and alarm, you can check the alarm icon “ ” by pressing CLOCK even when the player is turned off. 10 2 Select the AUX OPT To select the AUX OPT directly. TVtSPK 3 Enjoy sound 4 To escape from AUX OPT TVtSPK FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 11 Displaying Disc information Playing a Disc or file ON UNIT ON REMOTE 1 Press DISPLAY Uu 2 Select an item Ii 3 Adjust the display menu settings O RETURN 4 To return the exit 2 Select a DVD/CD FUNC. You can select an item by pressing U u and change or select the setting by pressing I i. Current title (or track/ file) number/ total number of titles (or tracks/ files) Current chapter number/ total number of chapters Elapsed playing time Selected audio language or channel DVD and finalized DVD±R/RW DivX files DivX JPEG files JPG B PLAY x x STOP Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together, you can select menu of files which you would like to play by pressing MENU. WMA DivX ACD JPG Press and hold U u to move to the previous or next page. Playing a DVD that has a menu DVD MP3 files MP3 Most DVDs now have menus which load first before the film begins to play. 1 You can navigate these menus using U u I i to highlight an option. 2 Press PLAY to select. WMA files WMA Skipping to the next/ previous chapter/ track/ file Audio CDs ACD Symbol Used in this Manual ALL B/X Playing a Disc or file - more you can do MP3 Selected sound/ EQ mode DVD 5 To stop the Disc playing Moving to the previous/ next page on the file list menu Selected subtitle Selected angle/ total number of angles All discs and file listed below FUNCTION IiUu 3 Adjust the menu settings / Select a file from the menu 4 Start the Disc playing Displaying Disc Information - more you can do ON REMOTE 1 Insert a disc on unit MP3 WMA DVD DivX ACD Press SKIP (>) to move to the next chapter/ track/ file. Press SKIP (.) to return to the beginning of the current chapter/ track/ file. Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file. 11 FB164-A0M_DSGPLLK_ENG_5705 Pausing playback 11/4/09 4:41 PM Page 12 Viewing the Title menu ALL DVD 1 Press PAUSE/STEP (X) to pause playback. 2 Press PLAY (B) to continue playback. Press TITLE to display the disc's title menu, if available. Frame-by-Frame playback Searches for the starting pointing of entered time code. 1 Press DISPLAY then select clock icon. 2 Enter a time then press ENTER. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons and press ENTER. if you enter the wrong number, press CLEAR to enter again. DVD Starting play from selected time DivX Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame. Playing repeatedly or randomly MP3 WMA DVD DivX ACD Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will be played back repeatedly or randomly. To return to normal playback, press REPEAT/RANDOM repeatedly. - Random play mode : only music files. Fast forward or fast reverse MP3 WMA DVD DivX ACD Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. Slow down the playing speed DVD While playback is paused, press SCAN (bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. 1.5 times faster playback DVD Press PLAY (B) when a DVD is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. “B x1.5” will appear in the screen. Press PLAY (B) again to return to normal playback speed. Selecting a subtitle language DVD DivX During playback, press SUBTITLE repeatedly to select a desired subtitle language. Changing the character set to display DivX ® subtitle correctly - Optional DivX 1 If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds to display the language code menu. 2 Press SUBTITLE repeatedly to change the language code until the subtitle is displayed properly. 12 Last Scene Memory DVD DivX DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off (Stand-by mode) the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Creating your own program ACD MP3 WMA You can play the contents of a disc in the order you want by arranging the order of the music on the disc. The program is cleared when the disc is removed. 1 Select a desired music then press PROG./MEMO. or select “ “ and then press ENTER to add the music to the program list. 2 To add all music in the disc, select “ ” and then press ENTER. 3 Select a music from the program list then press ENTER to start programmed playback. 4 To clear a music from the program list, select the music you want to clear then press CLEAR or select “ ” icon and then press ENTER. To clear all music from the program list, select “ ” then press ENTER. Displaying file information (ID3 TAG) MP3 You can check the ID3 TAG information of MP3 files only in discs by pressing DISPLAY repeatedly. Viewing photo files as a slide show JPG 1 Use U u I i to highlight ( ) icon then press ENTER to start slide Show. 2 You can change slide show speed using I i when ( ) icon is highlighted. Skipping to the next/ previous photo JPG Press SKIP (. or >) or I i to view the previous/ next photo. FB164-A0M_DSGPLLK_ENG_5705 Rotating a photo 11/4/09 4:41 PM Page 13 JPG Use U u to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. System Select - Optional You must select the appropriate system mode for your TV system. If “NO DISC” appears in the display window, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system. (PAL/ NTSC/ AUTO) Playable file requirement DivX • Available resolution: within 800x600 (W x H) pixels • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as “ _ ” mark on the display. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted. • Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx” • Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt) • Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX” • Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA” • For Discs formatted in Live file system, you can not it on this player. • If the name of movie file is different from that of the subtitle file, during playback of a DivX file, subtitle may not be display. • If you play a DivX file differ from DivX spec, it may not operate normally. MP3/ WMA • Sampling frequency : within 32 - 48kHz (MP3/ WMA) • Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA) • File extensions : “.mp3”/ “.wma” • CD-ROM file format : ISO9660 LEVEL 1 / JOLIET • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. • They should not contain special letters such as / ? * : “ < > l etc. • The total number of files on the disc should be less than 999. This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure Compatible playback. Customers should note that permission is required in order to download MP3/ WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. JPG • Normal: 5120 x 3840, Progressive jpeg : 2043 x 1536 • Recording condition: ISO9660 LEVEL 1/ JOLIET • Maximum files : Under 999. • Some discs may not operate due to a different recording format or the condition of disc. • File extensions: “.jpg” 13 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 14 Using a Bluetooth wireless technology Listening to the radio Make sure both for the FM and AM aerial to be stretched to the most. ON UNIT 1 Select FM or AM 2 Select a radio station FUNC. ] II / ii ] 3 To save a radio station A preset number will show in the display. 4 Select the preset number Up to 50 radio stations can be saved. 5 To confirm press ON REMOTE FUNCTION TUN.- / + Pairing your unit and Bluetooth device Pairing links this unit and Bluetooth device, and is required only once for the initial setup.Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. PROG./MEMO. ON UNIT PRESET U u PROG./MEMO. Listening to the radio - More you can do Looking for radio stations automatically Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station. Deleting all the saved stations 1 Press and hold PROG./MEMO. for two seconds. - “ERASE ALL” will flash up on the display. 2 Press PROG./MEMO. to erase all saved radio stations. Improving poor FM reception Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner from stereo to mono and usually improve the reception. 1 Select the function. FUNC. ON REMOTE FUNCTION 2 Operate the Bluetooth device and perform the pairing operation When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.Your unit appears as “LG Audio” 3 Enter the PIN cord. PIN cord : 0000 Some device doesn’t need the PIN cord 4 When this unit is successfully paired with your Bluetooth device, Bluetooth Icon and “BT AUDIO” will appears on the display window. 5 Select a file you want to play from your Bluetooth device. Note Depending on the Bluetooth device type, some devices have a different pairing way. 14 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 15 Using a Bluetooth wireless technology More you can do Seeing information about a your Bluetooth device Press DISPLAY key to display the information of the Bluetooth device connected to this unit. Each time when you press the display key the information is switched as follows. BT L_ADDR -> BT R_NAME -> BT condition. If not connected the Bluetooth device to the unit the information is switched such as BT L_ADDR and BT condition - BT L_ADDR : FB164 Bluetooth Device Address - BT R_NAME : your device name connected to the unit - BT : Bluetooth Bluetooth Profiles In order to use Bluetooth technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) A2DP technology is a new music revolution allowing you to send CD quality stereo music from one device to another without wires. A2DP is stereo music sent over Bluetooth without the hassle of plugging cables. Bluetooth Wireless Technology with A2DP technology makes mobile phones, pda’s and computers capable of streaming music directly to products such as the FB164 System. The Advanced Audio Distribution Profile (A2DP) is just one of the modes available for Bluetooth technology. Caution • This units be supported the Stereo Headset Profile (A2DP). • This units dose not be supported the Mono Headset Profile (Hands Free Profile) • The sound may be interrupted when the connection interfered by the other electronic wave • You cannot control the Bluetooth device with this unit. • Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. • Although the distance between your Bluetooth and the set is less than 10m, there are obstacles between both, your Bluetooth device cannot be connected. • Depending on the type of the device, you may not be able to use the Bluetooth function. • You can enjoy wireless system using phone, MP3, Notebook, etc... • When not connected the Bluetooth, "NO BT DEV" appears on the display window. • When connected the Bluetooth, "BT AUDIO" appears on the display window. • The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected. • When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected. • If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and lower the connection will disconnect when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth. • The device with Bluetooth wireless technology is disconnected, if you turn off the main unit or put the device away from the main unit more than 10m. Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. 15 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 16 Listening to music from your portable player Using an USB device You can enjoy media files saved on an USB device by connecting it to the USB port of the unit. If you want to operate other function, see the Playing a Disc or file section. The unit can be used to play the music from many types of portable player. ON UNIT ON UNIT ON REMOTE ON REMOTE 1 Open the USB port cover. 1 Connect the portable player to the PORT.IN (PORTABLE IN) connector of the unit. 2 Connect the USB device to the USB port of the unit. 3 Select the function. FUNC. FUNCTION B/X B PLAY x x STOP FUNC. FUNCTION Uu 4 Select a file you want to play. 5 Start your media playing. 6 To stop, press 7 Before disconnecting, you have to change to any other function. 2 Turn the power on. 3 Select the function. Turn on the portable player and start it playing. 1 /]] 1 POWER FUNC. FUNCTION Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support all USB devices. USB device requirement Devices which require additional program installation when you have connected it to a computer, are not supported. Look out for the follows • • • • • • • • • 16 Do not extract the USB device while in operation. For a large capacity USB, it may take longer than a few minute to be searched To prevent data loss, back up all data. If you use a USB extension cable or USB hub, the USB device is not recognized. Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.) This unit is not supported when the total number of files is 1000 or more. External HDD, Card readers, Locked devices, or hard type USB devices are not supported. USB port of the unit cannot be connected to PC. The unit can not be used as a storage device. 16 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 17 When you are recording, look out for the following Recording to USB ON UNIT ON REMOTE FUNC. FUNCTION USB REC. z REC x x STOP 1 Connect the USB device to the USB port of the unit. 2 Select a mode in which you want to record (ex. CD/ TUNER/ ...) Play a sound source first. If you want to record desired music file in disc to USB, play a file before starting the recording. 3 Start the recording 4 To stop, press Recording to USB - more you can do • You can check the recording percentage rate for the USB record on the screen during the recording.(AUDIO, MP3/ WMA CD only) • During recording MP3/ WMA, there is no sound. • When you stop recording during playback, the file that has been recorded at that time will be stored.(AUDIO CD Only) • Do not remove the USB device during USB recording. If not, an incomplete file may be made and not deleted on PC. • If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window. • Multi card reader device or External HDD can not be used for USB recording. • A file is recorded by 2 hours when you record for a long term. • when you stop recording during playback, the file will not be stored. • In the state CD-G disc, USB record is not operated. • You may not record more than 999 files. • The file number is saved automatically. • It’ll be stored as follows. AUDIO CD MP3/ WMA The other sources Recording Music file in disc source to USB One track recording If the USB recording is started during playback of the CD, the one track/ file would be recording into the USB. All tracks recording If the recording button is pressed at the CD stop, all tracks/ files would be recording. - The files in the sub-folders are not recorded during all track recording. - If you want to all tracks recording during playback, press stop twice. check the x”on the screen. “x Program list recording USB records after creating your own program if you want to record the track you want (AUDIO CD Only). The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights 17 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 18 Playing the iPod - more you can do Playing the iPod Pausing playback For detail refer to iPod guide. iPod mode: You can operate your iPod by using the supplied remote control and directly control on your iPod. OSD iPod mode: You can operate your iPod by controlling OSD menu on the TV screen with supplied remote control. The controls on your iPod are not operational in the OSD iPod mode. ON UNIT ON REMOTE Press PAUSE/STEP (X) or PLAY (B) to pause playback. Press PAUSE/STEP (X) or PLAY (B) to continue playback. Skipping to the next/previous file Press SKIP (>) to move to the next file. Press SKIP (.) to return to the beginning of the current file. Press SKIP (.) twice briefly to step back to the previous file. Fast forward or fast reverse During playback, press and hold SCAN (m / M) and then release at a point you want. 1 Open the iPod dock cover. Playing repeatedly Press REPEAT/RANDOM repeatedly to select an item to be repeated. The current file will be played back repeatedly. To return to normal playback, press REPEAT/RANDOM repeatedly. (On video files, this function is not available.) iPod message 2 Connect your iPod to the dock. 3 Select the iPod or OSD iPod function FUNC. 7 To stop the file playing 8 Before disconnecting the iPod, change to any other function by pressing 9 Remove the iPod 18 Compatible iPod B/X B PLAY • It works with all iPod models that have a dock connector. • Compatibility with your iPod may vary depending on the type of your iPod. • Depending on your iPod’s software version, it may not be possible to control your iPod from the unit. We recommend installing the latest software version. x x STOP When you use iPod, look out for the following FUNC. FUNCTION Uu 5 Select a file 6 Start the file playing FUNCTION U u and ENTER 4 Select the menu If you want to move backwards in the menu, press MENU. “Please check your iPod.” - If the power of your iPod is insufficient or the iPod is misconnected or unknown device. Reset the iPod if the iPod is not operating normally (Refer to http://www.apple.com/support/) “Connect Video Out(only composite) from the HTS to the TV and switch TV input accordingly.”, “Please, Control through an iPod’s display.” When you connect the unit and TV to COMPONENT VIDEO OUT, connect the unit and TV to VIDEO OUT. • Interference may happen depending on iPod devices. • The video files are outputted only when you connect the unit to VIDEO OUT. FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 19 Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose a area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW 19 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 20 Troubleshooting CAUSE PROBLEM CORRECTION No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive the DVD signal. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. The video cables are not connected securely. Connect the video cables securely to both the TV and unit. The DVD picture quality is poor. The disc is dirty. Clean the disc using a soft cloth with outward strokes. A DVD/CD will not play. No disc is inserted. Insert a disc An unplayable disc is inserted. Insert a playable disc (check the disc type, colour system and regional code). The disc is inserted upside down. Place the disc the side you can see the printed side. The menu is open on screen. Press SETUP to close the menu screen. There is a parental lock which prevents the playback of DVDs with a certain rating. Enter your password or change the rating level. Humming noise heard while a DVD or CD is playing. The disc is dirty. Clean the disc using a soft cloth with outward strokes. The unit is located too close to the TV, causing feedback. Move the unit and audio components further away from your TV. Radio stations can’t be tuned in properly. The aerial is positioned or connected poorly. Check the aerial connection and adjust its position. The remote control doesn’t work well / at all. 20 Attach an external aerial if necessary. The signal strength of the radio station is too weak. Tune to the station manually. No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). Preset some radio stations. The remote is not pointed directly at the unit. Point the remote directly at the unit. The remote is too far from the unit. Use the remote within 23 feet (7m) of the unit. There is an obstacle in the path between the remote control and the unit. Remove the obstacle. The battery in the remote control is flat. Replace the battery with new one. FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 21 About the Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc. Types of Playable Discs Type Logo DVD-VIDEO : Discs such as movies that can be purchased or rented. DVD-R : Video mode and finalized only DVD-RW : Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R : Video mode only Supports the double layer disc also DVD+RW : Video mode only Audio CD : Music CDs or CD-R/ CD-RW in music CD format that can be purchased. This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles, DivX, MP3, WMA or JPEG files. Some DVD±RW/ DVD±R or CD-RW/ CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. “Dolby”and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Regional Codes This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”. • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/ Live File System : Disc format system for Windows Vista) 21 FB164-A0M_DSGPLLK_ENG_5705 11/4/09 4:41 PM Page 22 Specifications Specifications General Power supply Power consumption Net Weight Bus power supply (USB) External dimensions (W x H x D) Operating temperature Operating humidity Output power T.H.D Tuner FM Tuning Range AM Tuning Range Speaker Refer to the main label Refer to the main label 3.2 kg DC 5 V 500 mA 175 x 269 x 290 mm 5°C - 35°C 5% - 85% 80 W + 80 W 0.5 % 480p (or 576p) and 480i (or 576i) 480i (or 576i) Designs and specifications are subject to change without prior notice. 22 FBS164V 3Way 4Speaker 4Ω 80W 160W 132 x 320 x 300 4.5 Kg 87.5 - 108.0 MHz or 87.50 - 108.00 MHz 522 - 1620 kHz, 520 - 1720 kHz or 522 - 1,710kHz DVD/CD Frequency response 40 - 20000 Hz Signal-to-noise ratio 75 dB Dynamic range 75 dB Bluetooth Version Bluetooth 2.0 Output Bluetooth standard power class 2 Frequency Band 2.4GHz band (2.4000GHz - 2.4835GHz) Available resolution according to connection [COMPONENT VIDEO OUT] [VIDEO OUT] Type impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight - “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. - Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.