LG | HS33S | LG HS33S Owner’s Manual

HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 1
Model: HS33S (HS33S-A2P, SH33S-F/A)
Unique Features
Full HD up-scaling
(1080p)
Home Theater
Speaker ez Set-up
View Full HD picture quality
with simple setup.
Listen sound from TV and
Digital Device with 2.1ch
mode.
Record music from CD to
your USB device.
Go to page 9
Go to page 14
Go to page 16
Portable In
Made for iPod
Listen to music from your
portable device (MP3,
Notebook, etc).
Enjoy music from iPod with
simple connection.
Go to page 16
Go to page 17
USB Direct Recording
P/NO : MFL56962858
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings should be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
2
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 3
Welcome to your new
stylish home theater system
Contents
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
What is SIMPLINK?
Making system connections . . . . . . . . . . . . . . . . . .6-7
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
Listening to the sound from your analog component . .7
OSD Initial language settings - optional . . . . . . . . . . .8
Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .8
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . .8-10
• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
• Refer to the TV owner’s manual for the details of SIMPLINK function.
• LG TV with SIMPLINK function has the logo as shown above.
• Use a higher version cable than 1.2A HDMI cable.
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .10
Displaying Disc Information . . . . . . . . . . . . . . . . . . .11
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .11-13
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .13
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .14
Home Theater Speaker ez Set-up . . . . . . . . . . . . . .14
Listening to music from your USB device . . . . . . . . .15
Recording music from CD to your USB device . . . . .16
Listening to music from your portable player . . . . . . .16
Listening to music from your iPod . . . . . . . . . . . . . . .17
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 4
Main Unit
q
p
o
n
*Touch sensor
m
This unit has sensitive controls that respond to the
touch of your fingers.
You can also change the volume by moving your finger
around the touch wheel.
l
k
j
*
a
i
h
b
c
d e
f
g
a POWER
g STOP
m SYSTEM JACK
b DISC SLOT
h TUNING UP & SKIP (>)
c EJECT
i PLAY/PAUSE (N / X)
n COMPONENT VIDEO OUT
JACKS
d REMOTE SENSOR
j MIC
o HDMI OUT JACK
e DISPLAY WINDOW
k USB PORT
p OPTICAL IN JACK
f TUNING DOWN & SKIP (.)
l PORTABLE IN JACK
q iPod DOCK
4
Precautions in using the touch buttons
• Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture
on the touch buttons before using.
• Do not press the touch buttons hard to make it
work.
- If you apply too much strength, it can damage the
sensor of the touch buttons.
• Touch the button that you want to work in order to
operate the function correctly.
• Be careful not to have any conductive material such
as metallic object on the touch buttons. It can cause
malfunctions.
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 5
Remote control
a
b
c
d
e
f
a
INPUT : Changes the input source ( AUX, AUX OPT,
PORTABLE, USB, OSD IPOD, IPOD)
SLEEP : Sets a certain period of time after which the unit
will switch to standby.
- Press SLEEP repeatedly to select the desired time period
options (in minutes): (Dimmer on t Sleep timer value t
Dimmer off)
Dimmer on: The display window becomes dark and the
touch wheel turns off.
- To view the time countdown to the standby mode, press
SLEEP again.
- To deactivate the sleep timer, press SLEEP until the
previous status is displayed or press POWER to switch the
unit to standby.
POWER: Switches the unit ON or OFF.
FUNCTION : Selects the function (DVD/CD, FM)
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may not
appear.
DISPLAY: Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu
b PRESET(v/V): Selects programme of Radio.
TUN.(-/+): Tunes in the desired radio station.
b / B / v / V (left/right/up/down):Used to navigate
on-screen displays.
ENTER : Acknowledges menu selection.
RETURN (O): Press to move backwards in the menu.
REC (z) : USB Direct Recording
c STOP (x): Stops playback or recording.
PLAY (B): Starts playback. Mono/Stereo.
PAUSE/STEP (X): Pause playback.
d tHT SPK (Home theater Speaker ez Set-up):
TVt
t HT SPK to select the AUX OPT directly.
Press TVt
MUTE : Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.
VOLUME (+/-) : Adjusts speaker volume.
EQ : You can choose 6 (or 7) fixed sound impressions.
VSM : Press VSM to set the VIRTUAL sound.
REPEAT: Repeats a Chapter/ Track/ Title/ all.
SUBTITLE: During playback, SUBTITLE repeatedly to
select a desired subtitle language .
0-9 numerical buttons: Selects numbered options in a
menu.
e TV Control buttons : Controls the TV. (LG TV only)
PROG./MEMO. : Accesses or removes Program menu.
CLEAR: Removes a track number on the Program List.
f MIC VOL : Adjusts microphone volume.
ECHO VOL : Adjusts echo volume.
VOCAL FADER : You can enjoy the function as karaoke,
by reducing singer vocal of music in the various source.
(MP3/WMA/CD/DTS/Dolby Digital etc.)
Put the batteries into the remote control
Make sure that the + (plus) and – (minus) on the batteries
match those on the remote control.
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR (+/–) button repeatedly until the TV turns
on or off.
. / >): Go to next or previous chapter/ track.
SKIP(.
SCAN(bb/BB) : Search backward or forward.
5
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 6
Making system connections
Connecting the main unit, speakers, and FM
antenna to the active subwoofer.
a Connect the system jack marked MAIN to the main unit (SYSTEM).
Secure the jack by tightening the two screws.
Front speaker (L)
Front speaker (R)
b Connect the system jack marked SPK to the active subwoofer (SYSTEM).
Secure the jack by tightening the two screws.
c
cd Connect the speakers to the active subwoofer (SPEAKERS).
Connect the red end of each wire to the terminals marked+ (plus) and
black end to the terminals maked - (minus).
a
e
b
d
Active subwoofer
The bottom of the speaker
e Connect the FM antenna for listening to the radio.
• Be sure to fully extend the FM antenna.
• After connecting the FM antenna, keep it as horizontal as possible.
6
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 7
Making system connections
Connecting the video out to your TV.
C To connect to a TV with the HDMI jack
Check the jacks of your TV, and choose the A , B , or C connection.
Picture quality improves in order from A to C .
Connect the HDMI cable from the HDMI OUT jack on the rear of the main
unit to the HDMI IN jack on your TV.
• If your TV does not accept your resolution setting, abnormal picture
appears on the screen.
• Use the HDMI Cable within 5 meters.
• If the volume bar is not displayed on TV screen, when you select Simplink
to off on TV, restart the unit.
Available resolution according to connection
[HDMI OUT] : Auto, 1080p, 1080i, 720p and 480p (or 576p)
[COMPONENT VIDEO OUT] : 480p (or 576p) and 480i (or 576i)
[VIDEO OUT] : 480i (or 576i)
Listening to the sound from
your analog component
Analog signal components such as VCR and TV.
B
C
A
A To connect to a TV with the video in jack
Connect the video cable from the VIDEO OUT on the rear of the active
subwoofer to the video in jack on your TV.
B To connect to a TV with the component video in jacks
If your TV has component video in, connect a component video cable from
COMPONENT VIDEO OUT (Y, PB and PR) jacks on the rear of the main unit
to the component video in jacks on your TV.
ON REMOTE
1 Connect the audio out of your analog component
to the AUX IN (AUDIO L/R) on the rear of the
active subwoofer:
2 Select the AUX function:
INPUT
7
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 8
OSD Initial language settings - optional
Before using the unit for the first time, you have to adjust OSD initial
language.
ON REMOTE
1 Turn the power on:
The language list appears.
2 Select the language:
POWER
vV b B
3 Press:
ENTER
4 To confirm press:
b B and ENTER
Adjust the settings
ON REMOTE
1 Display setup menu :
SETUP
2 Select a desired option on the first level:
vV
3 Move to second level:
B
4 Select a desired option on the second level:
vV
5 Move to third level:
B
6 Change the setting:
v V, ENTER
Adjust the settings - more you can do
Adjust the language settings
Initial Setting the Area Code
The first time you use this unit, to set the Area Code you have to as below.
ON REMOTE
1 Display setup menu:
SETUP
2 Select LOCK menu on the first level:
vV
3 Move to second level:
The activated Area Code appears on the
second level.:
B
4 Move to third level:
B
5 Enter the new password:
numerical buttons
(0-9) and ENTER
6 Recheck entered new password:
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area:
After select, Rating and Password will be
activated.(page 18)
8 To confirm press:
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the Rating and Password.
8
vV b B
ENTER
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD, do as follows;
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Audio/Disc Subtitle/Disc Menu– Select a language for the
Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 18). If you make a mistake before pressing
ENTER, press CLEAR.
[Off] (for Disc Subtitle): Turn off Subtitle.
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 9
Adjust the display settings
Adjust the audio settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
2.1 Speaker Setup - Adjust 2.1 Speaker Setup menu for amplifier’s output.
[Speaker]: Select a speaker that you want to adjust.
[Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB)
[Test]: Press b / B to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Video Resolution - Use vV to select the desired resolution then press ENTER
to confirm your selection.
You can set 1080p video resolution to enjoy Full HD picture quality.
(Full HD up-scaling)
The number in 480p (or 576p), 720p, 1080p and 1080i indicates the number of
lines of video. The “i” and “p” indicate interlaced and progressive scan,
respectively.
[Auto] If your HDMI jack is connected to TVs providing display information
(EDID), automatically selects the resolution best suited to the connected TV
(1080p, 1080i, 720p or 480p (or 576p)). (only for HDMI connection)
[1080p] Outputs 1080 lines of progressive video. (only for HDMI connection)
[1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection)
[720p] Outputs 720 lines of progressive video.(only for HDMI connection)
[480p (or 576p)] Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)] Outputs 480 (or 576) lines of interlaced video.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV
to scroll up and down through the delay amount, which you can set at anything
between 0 and 300m sec.
The delay will vary depending on which digital TV channel you are on. If you
change channel you may need to readjust the HD AV Sync.
Notes on Video Resolution
• Only resolutions supported by the TV are available.
• Depending on your TV, certain HDMI output resolutions may not work.
• If your TV does not accept your resolution setting, an abnormal picture
appears on the screen. Please read TV’s owner’s manual then set the
resolution that your TV can accept.
• If the HDMI jack is connected for TVs providing display information (EDID),
you can not select resolutions that the TV does not accept.
• If the picture does not appear on the screen, change the TV’s input source.
• If you turn off the TV or disconnect the HDMI cable during playback of the
device, the playback may pause. You have to click on the play button to play
back again. For some TVs, when you change the TV mode, such condition
specified above may happen.
9
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 10
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Setting the sound mode
VSM (VIRTUAL SOUND MATRIX)
You can select the Virtual sound. Press VSM to set the virtual sound. (This
function does not operate when you select AUX or Tuner functions. VSM is not
available during DivX file playback.)
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
2Ch source
[ON STAGE] mode: Simulates a large Concert hall
[VIRTUAL] mode: Realtime 3D positioned sound rendering technology with
stereo sources, optimized for stereo speakers. Listeners may experience
amazing virtual surround effects with their own multimedia players.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 18.
5.1Ch source
Adjust the others settings
Set a pre-programmed sound field
PBC (Playback Control) – Playback control provides special navigation
features that are available on some discs. Select [On] to use this feature.
This system has a number of pre-set surround sound fields. Select the one
which best suits the programme you are watching by pressing EQ repeatedly to
cycle through the options : NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,
ROCK, JAZZ
DivX(R) Registration – We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registration
code of the unit.
Semi Karaoke – When a chapter / title / track is fully finished, this function
shows the score in the screen with a fanfare sound.
Available discs for the Semi Karaoke function: DVD discs / DVD Karaoke Discs
[On]: When you finished singing a score will appear on the screen.
[Off]: Fanfare and score do not appears on the screen.
- This function operate on the DVD/CD mode.
- The Semi Karaoke function is available only when a microphone is connected.
- In case that a fanfare or score appears when a chapter of a movie file is
changed during playback, set the Semi Karaoke to Off at the setup menu or
disconnect the microphone.
Bit Rate – You can set the quality of the recorded file.
Bit rate refers to the amount of data used to store each second of audio.
Generally, higher bit rates provide better sound quality, but require more storage
space for the same length of audio.
10
[VIRTUAL] mode: A patent pending downmix technology converts 5.1 channel
to 2 channel sound having directional information of audio.
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal
EQ regardless of Tag information.
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 11
Displaying Disc Information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Press DISPLAY:
DISPLAY
1 Insert a Disc in the slot: (On unit)
2 Select a item:
vV
2 Select the DVD/CD function:
FUNCTION
3 Adjust the Display menu settings:
bB
vV b B
4 To return the exit:
DISPLAY
3 Adjust the menu settings:
or Select a file from the menu:
4 Start the Disc playing:
B
PLAY
5 To stop the Disc playing:
x
STOP
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
pressing b B.
1/6
4/26
1 ENG
D
Current title (or track)
number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
3/2.1CH
1 KOR
1/3
-
vV
Playing a Disc or file - more you can do
Playing a DVD that has a menu DVD
Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV b B to highlight an option.
Press ENTER to select.
Skip to the next/previous chapter/track ALL
Selected subtitle
Selected angle/total number of angles
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
Selected sound mode
Pause playback ALL
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue
playback.
Symbol Used in this Manual
All discs and file listed below
ALL
MP3 files
MP3
Frame-by-Frame playback DVD
DVD and finalized DVD±R/RW
DVD
WMA files
WMA
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
DivX files
DivX
Audio CDs
ACD
Playing repeatedly ALL
DivX
Press REPEAT repeatedly to select a desired repeat mode: track, all and off.
The current title, chapter or track will be played back repeatedly. To return to
normal playback, press REPEAT repeatedly to select [Off].
11
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 12
Fast forward or fast reverse ALL
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeatedly.
Press PLAY (B) to continue play at normal speed.
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLE. Press ENTER after selecting MUSIC, PHOTO, or MOVIE by
pressing b B.
Selecting a subtitle language DVD
During playback, press SUBTITLE (
language.
DivX
) repeatedly to select a desired subtitle
If the subtitle does not display properly during playback, press and hold SUBTITLE
for about 3 seconds then press SUBTITLE to select another language code until
the subtitle is displayed properly
Slow down the playing speed DVD
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed.
Watch and listen 1.5 times faster DVD
ACD
MP3
WMA
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5
times faster than normal playback speed. B x1.5 will appear in the top right
corner of the screen. Press PLAY again to return to normal playback speed.
Viewing the Title menu DVD
Press TITLE to display the disc's title menu, if available.
Viewing the DVD MENU DVD
Press MENU to display the disc menu, if available.
Starting play from selected time DVD
Changing the character set to display DivX® subtitle correctly DivX
DivX
Searches for the starting point of entered time code. Press DISPLAY during
playback and select the time clock icon. Input the required start time in hours,
minutes, and seconds and press ENTER. If you enter the wrong number, press
CLEAR to enter again.
Last Scene Memory DVD
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
DivX file requirement DivX
DivX disc compatibility with this player is limited as follows:
• Available resolution size: 800x600 (W x H) pixel
• The file name of the DivX subtitle is available by 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
• If the number of the screen frame is over 30 per 1 second, this unit may not
operate normally.
• If the video and audio structure of recorded files are not interleaved, either
video or audio is outputted.
• If the name of movie file is different from that of the subtitle file,during
playback of a DivX file, subtitle may not be display.
• MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable DivX subtitle: SubRip(*.srt/*.txt), SAMI(*.smi), SubStation
Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt)
TMPlayer(.txt), DVD Subtitle System(.txt) (Files (VobSub(.sub)) included with
USB device is not supported)
• Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”
• Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 999 (total number of files and folders)
Displaying file information (ID3 TAG ) MP3
While playing an MP3 file containing file information, you can display the information
by pressing DISPLAY repeatedly.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
12
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
Creating your own program ACD
MP3
2:05 PM
Page 13
WMA
You can play the contents of a disc in the order you want by arranging the order
of the music files on the disc. The program is cleared when the disc is removed.
Select a desired music file then press PROG./MEMO. or select “
“ and then
press ENTER to add the music file to the program list. To add all music files on
the disc, select “
” and then press ENTER. Select a music file from the
program list then press ENTER to start programmed playback.To clear a music
file from the program list, select the music file you want to clear then press
CLEAR or select “
” icon and then press ENTER. To clear all music files
from the program list, select "
" then press ENTER.
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
•
•
•
•
•
File extensions: “.mp3”, “.wma”.
Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
CD-R/RW, DVD±R/RW Format: ISO 9660
Maximum Files/Disc: Less than 999 (total number of files and folders)
System Select
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) on the remote
control for more than five seconds to be able to select a system.
VOCAL FADER
You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source.(MP3/WMA/CD/ DTS/Dolby Digital etc.)
- This function available to use only when a microphone is connected.
Press VOCAL FADER button then you can see “FADE ON”or “FADE OFF” on
the front display.
- The quality of the VOCAL FADER may be different depending on the recording conditions of music files.
- This function is not available on the MONO mode.
Viewing photo files
ON REMOTE
1 Insert a Disc in the slot: (On unit)
-
2 Select a photo file:
vV
3 Display the selected file in full screen:
ENTER
4 To return to the menu:
x
STOP
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight (
) icon then press ENTER to start slide show.
You can change slide show speed using b B when (
) icon is highlighted.
If X is selected, the slide show dose not operate.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Use vV b B to rotate the photo in full screen mode.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the
slide show.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Normal - within 5120 x 3840 (W x H) pixels.
Progressive - within 2048 x 1536 (W x H) pixels
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 999 (total number of files and folders)
13
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 14
Home Theater Speaker ez Set-up
Listening to the radio
Be sure that FM antenna is connected.
ON REMOTE
1 Turn the power on:
POWER
2 Select FM:
FUNCTION
3 Select a radio station:
TUN.-/+
4 To save a radio station:
A preset number will show in the display.
Up to 50 radio stations can be saved.
PROG./MEMO.
5 To confirm press:
PROG./MEMO.
6 To select a saved station:
PRESET v/V
Listening to the radio - more you can do
Look for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station.
Choose a preset number for a radio station
When storing a radio station, the preset number can be chosen. When this unit
automatically shows a preset number, press PRESET v/V to change it. Press
PROG./MEMO. to save your chosen number.
Delete all the saved stations
Press and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on
the display. Press PROG./MEMO. to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) on the remote control. This will change the tuner from stereo to
mono and usually improve the reception.
14
Listen to sound from TV and Digital Device with 2.1ch mode.
Even in power off mode, if you press TVtHT SPK, then power is on
and automatically changed to AUX OPT mode.
ON REMOTE
1 Connect the main unit’s OPTICAL IN jack
to jack on optical out of your TV (or Digital
Device etc.).:
-
2 Select the AUX OPT function:
To select the AUX OPT directly
3 Listen sound with 2.1ch speaker.:
4 To escape from AUX OPT:
tHT SPK
TVt
tHT SPK,
TVt
FUNCTION, or INPUT
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 15
Listening to music from your USB device more you can do
Listening to music from your
USB device
The advantage of connecting your portable USB player through the system’s USB port is that the USB device can be controlled from the system.
Compatible USB Devices
• Devices which require additional program installation when you have connected it to a computer, are not supported.
• MP3 Player : Flash type MP3 player.
The MP3 player requiring installation of a driver is not supported.
• USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0,
it operates at the same speed as that of USB 1.1)
USB device requirement
ON REMOTE
1 Connect the USB device to the unit:
-
2 Select the USB function:
INPUT
3 Select a file from the menu:
vV
4 Start your music playing:
BPLAY
5 Before disconnecting the portable USB
device, change to any other function by
pressing:
FUNCTION or INPUT
6 Remove the USB device:
-
• Do not extract the USB device while in operation.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device might not be
recognized.
• A device using NTFS file system is not supported. (Only FAT (16/32) file
system is supported.)
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phone are not supported.
• This unit is not supported when the total number of files is 1000 or more.
• If the connected USB device has two or more folders, a drive folder is
displayed on the screen. If you want to move to the previous menu after you
select a folder, press RETURN.
• In case of Multi card reader, video files can not be played.
15
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 16
Recording music from CD to
your USB device
ON REMOTE
1 Connect the USB device to the unit:
-
2 Select the DVD/CD function:
FUNCTION
z REC
3 Start the recording:
If you want to record a desired music file
in disc to USB, record after playing
back the file.
v V, PLAY (N) and
z REC
4 To stop a recording:
x
STOP
Recording music from CD to your USB device
- more you can do
Record Audio CD source to USB
One track recording - If the USB recording is started during playback of the
CD, the only track would be recorded into the USB.
All track recording - If the REC button is pressed at the CD stop, all track
would be recorded.
Program list recording - USB Records after selecting the tracks pressing the
PROG./MEMO. button if you want to record the track you want. (Refer to
“Creating your own program” on page 13.)
• If you record more 999 files on CD_REC folder, “ERROR” appears on the
display window.
• New files are numbered in numeric sequence. If the total number of the files
are more than 999, delete some or store some in PC.
• External HDD, Multi Card reader, Locked device and MP3 player is not
supported.
• If you turn off and then on TV when the connected TV is HDMI mode,
nothing may be displayed on screen during USB recording. To solve the
problem, stop the USB direct recording.
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This
equipment should not be used for such purposes.
Be responsible
Respect copyrights
Listening to music from your
portable player
The player can be used to play the music from many types of portable
player
When you are recording, look out for the following
• Do not remove the USB device during USB recording. If not, an incomplete
file may be made and not deleted on PC.
• When you start the USB direct recording, you can check the recording
percentage rate on the screen.
• During the recording is no sound and not operate for volume .
• When you stop recording, the file that has been recorded at that time will be
stored.
• Playable USB REC. Bit rate : 96/128kbps (Refer to “Bit Rate” on page 10.)
• PAUSE/STEP (X) button does not operate during USB recording.
• USB port of the unit cannot be connected to PC. The unit cannot be used as
a storage device.
• If the USB recording is not available, “NO USB”,.“ERROR”, “USB FULL”,
“NO REC” appear on the display window.
• File will be stored to CD_REC folder as a format “TRK-001.MP3”.
• CD-G disc and the disc encoded with DTS are not recorded to USB.
16
3.5mm stereo
miniplug cable
ON REMOTE
1 Connect the headphone (or line out ) jack
of the portable player into the PORT. IN on
the right side of the main unit:
-
2 Turn the power on:
POWER
3 Select the PORTABLE function:
INPUT
4 Turn the portable player on and start it
playing:
-
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 17
Listening to music from your iPod - more you
can do
Listening to music from your
iPod
iPod mode: You can operate your iPod by using the supplied remote
control and controls on your iPod. TV screen is turned off. iPod will not be
charged when selecting the iPod mode. But you can enjoy better sound
quality.
OSD iPod mode: You can operate your iPod by controlling OSD menu
on the TV screen with supplied remote control. The controls on your iPod
are not operational in the OSD iPod mode. If you want to charge the iPod
while listening to music, selects the OSD iPod mode.
Pause playback OSD iPod mode
iPod mode
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue
playback.
Skip to the next/previous file OSD iPod mode
Fast forward or fast reverse OSD iPod mode
To open the iPod dock door:
Press the marked iPod v on
the iPod dock door and push
it backwards.
iPod mode
Press SKIP (>) to move to the next file.
Press SKIP (.) to return to the beginning of the current file.
Press SKIP (.) twice briefly to step back to the previous file.
iPod mode
During playback, press and hold SCAN (m or M) and then release at a
point you want.
Playing repeatedly OSD iPod mode
iPod mode
Press REPEAT repeatedly to select a desired repeat mode : track, all and off.
iPod message OSD iPod mode
“Please, check your iPod” - If the power of your iPod is insufficient or the
iPod is misconnected or unknown device. Reset the iPod if the iPod is not
operating normally (Refer to http://www.apple.com/support/)
ON REMOTE
1 Connect your iPod to the Dock on the top of
the main unit:
2 Turn the power on:
3 Select the iPod or OSD iPod function:
4 Select the menu:
5 Select a file:
6 Start the file playing:
7 To stop the file playing:
To move the previous mode, press MENU
on the remote control.
8 Before disconnecting the iPod, change to
any other function by pressing:
9 Remove the iPod:
POWER
INPUT
v V ENTER
vV
B PLAY or ENTER
x
STOP
Compatible iPod
• Compatibility with your iPod may vary depending on the type of your iPod.
• Depending on your iPod’s software version, it may not be possible to control
your iPod from the unit. We recommend installing the latest software version.
When you use iPod, look out for the following
• Interference may happen depending on iPod devices.
• The video or photo file is not displayed.
• When iPod is connected with dock connector, it may result in malfunctions of this
unit.
FUNCTION or INPUT
-
17
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 18
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
18
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 19
Troubleshooting
PROBLEM
CAUSE
CORRECTION
No power
No picture
The power cord is disconnected.
The TV is not set to receive the DVD signal.
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the
picture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals
correctly.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc
Insert a playable disc (check the disc type, colour system
and regional code).
Place the disc with the label or printed side facing
upwards.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
The video cables are not connected securely.
There is little or no sound
The DVD picture quality is poor
A DVD/CD will not play
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
The audio cables are damaged.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is inserted upside down.
Humming noise heard while a
DVD or CD is playing
Radio stations can’t be tuned in
properly
The remote control doesn’t
work well / at all
The display window becomes
dark and the touch wheel turns
off.
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
The disc is dirty.
The DVD receiver is located too close to the TV, causing
feedback.
The antenna is positioned or connected poorly.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have
been.cleared(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path between the remote control
and the unit.
The batteries in the remote control are flat.
The dimmer function is activated.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see page 14 for details.
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
Switch off dimmer. (Refer to SLEEP on page 5)
19
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 20
Types of Playable Discs
Type
About the
Logo
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
DVD+R: Video mode only
Supports the double layer disc also
DVD+RW: Video mode only
Audio CD:
This unit plays DVD±R/RW and CD-R/RW that contains audio titles,
DivX, MP3,WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of the recording
device and authoring software.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS is a registered trademark and the DTS logos, Symbol and DTS
2.0 Channel are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights
Reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
20
Symbol Display
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
HS33S_A2P.BSGPLLK_ENG_2858
3/4/09
2:05 PM
Page 21
Specifications
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating conditions Temperature
Operating humidity
Laser
Refer to main label.
Refer to main label.
2.15 kg
360 x 78 x 216 mm
5°C to 35°C,
Operation status: Horizontal
5% to 85%
Semiconductor laser,
wavelength 650 nm
Tuner FM
FM Tuning Range
FM Intermediate Frequency
87.50 - 108.00 MHz or 65.00 - 74.00 MHz,
87.50 - 108.00 MHz
10.7 MHz
Amplifier
Stereo mode
75 W + 75 W (4Ω at 1 kHz, THD 10 %)
Subwoofer : 150 W (3Ω at 80 Hz, THD 10 %)
Speakers
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front
Speaker
Active
Subwoofer
2 Way 2 Speaker
4Ω
75 W
150 W
110 x 330 x 130 mm
1.2 kg
1Way 1Speaker
3Ω
150 W
300 W
200 x 401 x 445 mm
10.9 kg
Designs and specifications are subject to change without
prior notice.
21
Download PDF