LH-C6231W NA3SCLS DVD/CD/VCR RECEIVER Home Cinema System OWNER'S MANUAL MODEL: LH-C6231 (Main Unit: LH-C6231W Speakers: LHS-C6231T, LHS-C6231W) CD-R/RW PAL Before please connecting up, operating or repairing this read this instruction booklet carefully and product, completely. Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons. The exclamation mark within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance instructions in the instructions (servicing) accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in a confined space similar unit. CAUTION: This DVD/CD/VCR receiver To ensure proper use of this employs a Laser product, please System. read this OTES ON COPYRIGHTS: owner 's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). Performing controls, adjustments, or carrying out procedures specified herein may result in hazardous radi- other than those ation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is located on the back of this unit. This number is to others. You should retain this Model No. Serial No. 2 guide as a unique to this unit and not available record requested information here and permanent record of your purchase. ___________________________________ ___________________________________ Table of Contents SpecialDVDFeatures.......................30 Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 FrontPanelControls........................6 DisplayWindowIndicators...................7 RemoteControlButtons.....................8 RearPanelConnections.....................9 TitleMenu..........................30 DiscMenu..........................30 CameraAngle.......................30 .30 ChangingtheAudioLanguage. .30 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................30 31-32 Operation with Audio CD and MP3/WMA Discs . . . .31 PlayinganAudioCDandMP3/WMADiscs NotesonMP3/WMARecordings................31 . . . . . . Pause.............................32 MovingtoanotherTrack...............32 RepeatTrack/All/Off...................32 Search.............................32 Preparation Connections...........................10-14 .10 TV&SetTopBoxConnections. Accessory Audio/Video (A/V) Connections to DVD/CD/VCRreceiver....................11 RadioAerialConnections..................11 . . . . . . . . . . . . . . . SpeakerSystemConnection...............12 SpeakerPositioning......................13 MiniGlossary...........................14 .15-19 BeforeOperation-VCRpart. . . . . . . . . . . . . VideochannelSet.......................15 15 Using your receiver for the very first time Howtousethemainmenu................16 .16 TuninginTVstationsAutomatically. .17 TuninginTVstationsManually. .18 ChangingtheorderofTVstations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DeletingTVstations......................18 SettingtheclockManually.................19 Tosetthecoloursystem..................19 .20-23 BeforeOperation-DVDpart. GeneralExplanation......................20 On-ScreenDisplay.......................20 InitialSettings........................21-23 GeneralOperation....................21 Language..........................21 . . . . . . . . . . . . Picture.............................21 Speakersetup.......................22 Others (DRC/Vocal/PBC/Auto play) 22 . . . . . . . ParentalControl......................23 RepeatA-B.........................32 3DSurround........................32 .32 ChangingtheAudioChannel. OperationwithJPEGDisc..................33 ProgrammedPlayback.....................34 Programmed Playback with Audio CD . . . . . . . . . . andMP3/WMADiscs........................34 .34 ProgrammedPlaybackwithVideoCD .34 RepeatProgrammedTracks .34 ErasingaTrackfromProgrammelist. 34 Erasing the Complete Programme list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SpeakerSetup...........................35 AdditionalInformation.....................35 .36-37 AdditionalOperation-VCRpart. OnScreenDisplay.......................36 TapeCounterMemoryStop................36 .36 FriendlyUserGuide(VideoDoctor). ez(easy)Repeat........................36 Hi-FiStereoSoundSystem................37 SpecialRecording.........................38 CopyingfromDVDtoVCR.................38 38 Recording from another video recorder RadioOperation........................39-40 .39 PresettingtheRadioStations. ListeningtotheRadio....................39 . . . . . . . . . . ToCleartheStoredRadioStations TuningintoaStationManually. TuningintoaStationAutomatically. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 .40 .40 Operation OperationwithTape.....................24-27 Playingatape..........................24 .24 CM(CommercialMessage)SKIP. OPR (Optimum Picture Response). 24 .25 InstantTimerRecording(ITR). Timer recording using On Screen Display 26-27 .28-30 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GeneralFeatures........................28 MovingtoanotherTITLE...............28 28 Moving to another CHAPTER/TRACK . Reference LanguageCodeList.......................41 CountryCodeList.........................42 Troubleshooting........................43-44 Specifications..........................45-46 . . . About the symbols for instructions Indicates hazards likely to cause harm to the unit itself or other material damage. . Search.............................28 Still Picture and Frame-by-Frame Playback 29 SlowMotion.........................29 Indicates special operating Indicates tips features of this unit. . and hints for making the task easier. Repeat............................29 RepeatA-B.........................29 TimeSearch........................29 3DSurround........................29 Zoom..............................30 MarkerSearch.......................30 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a SVCD, DVD-RW, DVD+RW, Kodak PICTURE CD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. Depending or itself, some cannot be -- -- the conditions of the the CD-R/RW ment CD-R/RW played recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs irregularly shaped octagonal). It may result in or otes Some use on (Video Sections of CDs enabling On (e.g., heart-shaped malfunctions. designed by the software manufacturer, playback features of the unit may not be available only) piece assigned musical on a a video CD track number, you to locate the track you want. video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures Types There and still of video CDs are two supplied with purposes may not be able to be played on the types of video CDs: Video CDs PBC the DVDs and Video CDs. Some DVDs made for busi- equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the system via menus, search functions, typical computer-like operations. Moreover, of high resolution can be played if they are or still other pictures included in the disc. unit. Regional Video CDs not in the DVDs manufactured for of designed region "3" playback region code DVD software. The some DVDs indicates which those discs. This unit on the labels of of player only play DVDs type can and encoded 3 can labeled "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may or still be subject playable. to area restrictions and therefore not equipped with PBC (Version 1.1) Operated way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. code of the DVD/CD/VCR receiver and This DVD/CD/VCR receiver is 4 or a of DVDs and Video CDs playback operations other functions may be added. Make sure to also refer to the instructions "3" CD and audio CD picture you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs or play a audio CD. Each track is or an disc content ness enabling easily. Scene (the may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to some feature content the unit. on Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not accompanying Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track otes on or additional feature content, or music album. Each title is assigned a title reference number Video CD -- (DVD only) DVD same Before Use (Continued) Precautions Cleaning Fingerprints the unit Handling discs or When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. and dust the disc on reduce sound with a clean quality. cloth. Wipe Before distort the can playing, picture clean the disc the disc from the centre out- wards. INTRODUC When setting up the unit picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position The the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, or turn off the the exterior surfaces clean use volatile liquids, such as the unit. Do not leave rubber contact with the unit for leave marks Cleaning a insecticide spray, plastic products in long period of time. They will or the surface. on the unit a soft cloth use a benzene, or thinner, are moistened with lightly use About " soft, dry cloth. If the surfaces solution. Do not spray intended for a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, vinyl records. Symbols About the To clean the cabinet Use Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static symbol display " may appear on the TV This icon means the function manual is not available on the surface About the disc of the unit. clear a picture The DVD/CD/VCR receiver is a high-tech, precision optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. applicable only DVD device. If the Notes Disc on Discs of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function VCD1.1 Video CDs without the PBC (playback control) function CD Audio CDs. MP3 MP3 disc WMA WMA disc JPEG JPEG disc Handling Do not touch the Hold the disc get VCD2.0 for instructions symbols A section whose title has To obtain during operation. explained in this owner's that specific DVD video disc. screen on by playback side of the disc. edges so that fingerprints the will not the surface. Do not stick paper or tape on the disc. Setting the Output Source You must select one of your output VCR) to view on the TV screen. sources (DVD or If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel ? until DVD indicator source on the front panel lights of DVD deck is viewed on the TV and output screen. If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel ? until VCR indicator Storing After discs playing, store the disc in its source on the front of VCR deck is viewed panel lights on the TV and output screen. case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunas there may be a considerable increase inside the car. light, temperature 5 Front Panel Controls OPEN/CLOSE Opens or closes the disc (Z) EJECT(Z) tray. Remote Sensor Pause remote control here. a playback of tape a or a disc in the DVD Press repeatedly for temporarily. frame-by-frame playback. disc here. COPY/MEMORY STOP Press to copy a DVD in the DVD deck to a VHS tape in the VCR a radio stations PLAY frequency To play back Cassette FM/AM change a (x) disc or tape. into the tuner. To of Stops playback deck. Enter or VCR deck Tray (DVD deck) Insert tape in the VCR deck. PAUSE/STEP(X/C) Point the DVD/CD/VCR receiver Disc the Ejects between AM and Insert a a recorded tape or (B) disc. Compartment (VCR deck) video cassette here. FM bands. Display window DVD/VCR indicator Indicates the active deck. DVD/VCR Select on (output select) of your output sources to view the TV screen between DVD and VCR. one PROG/TUNING (4/3) through memorized channels or to control tracking during playing back a tape (VCR mode). To tune in the desired station (Radio Mode). To scan or up down REC/ITR To record AV3((VIDEO normally IN/AUDIO or to activate Instant Timer (z) Recording. IN(Left/Right)) Connect the audio/video output of TV/Monitor, Another VCR). an external source (Audio system, Reverse SKIP/SCAN DVD: Go to chapter/track. beginning of current chapter/track Press and hold for two seconds for or a to (S/Q) previous fast reverse search. VCR: Rewinds the tape during the STOP mode or for fast reverse picture search. Forward SKIP/SCAN DVD: Go to NEXT chapter/track. (R/T) Press and hold for two seconds for a fast forward search. VCR: Advances the tape during the STOP mode forward or picture for fast search. VOLUME Control STANDBY/ON indicator Switches the DVD/CD/VCR receiver ON and OFF. 6 Turn the knob clockwise to increase volume, counterclockwise to decrease the volume. Display Window Indicators Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD (Lights when a disc is deck.) WMA disc inserted DVD/CD/VCR receiver mode Indicates the unit is radio mode. or a VCR timer is in VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/CD/VCR receiver is Indicates current surround mode. Recording a tape. Indicates the unit is playing back a tape recorded in Hi-Fi. MUTE indicator Programmed playback active A cassette is loaded in the VCR deck. DIGITAL PCM WMA PHOTO dts VCD ST PROLOGIC RADIO II PROG CHP/TRK COPY REC Hi-Fi MUTE DVD MP3 TV RPTALLAB Total Indicates current track number or channel number. chapter, playing time/Elapsed time/ Frequency/remaining time/ Current deck status/Surround mode/Volume etc. indicators. Indicates the unit is TV mode. MP3 disc inserted. Repeat playback mode indicators. VCD disc inserted. DVD disc inserted. Lights up when a is being received stereo broadcast in radio mode. JPEG disc inserted. 7 INTRODUC Remote Control Buttons FM/AM Tuner select button POWER Switches DVD/CD/VCR receiver ON and Select the DVD/CD/VCR receiver's tuner as the listening choice. (FM and AM OPEN/CLOSE, OFF. bands) EJECT (Z) AV SELECT Opens and closes the disc tray. Ejects the tape in the VCR deck. - - Select output source to view VCR) on (CD/DVD the TV in options a DVD Selects sound mode between CD/DVD camera angle VCR FM/AM AV SELECT if Removes PROGRAM or removes Program MUTE menu. SOUND MODE ZOOM DVD video Enlarges image. point during playback. MARKER SEARCH menu. Selects PROGRAM CLEAR AUDIO ANGLE SUBTITLE TITLE - an in the option menu. onscreen. (b/B): TUNING VOLUME setup DISPLAY picture search through recording. seconds of STOP VOLUME SETUP/ i TUN OK -ING REC/ITR normally or or removes menu. DISC MENU PR/TRK/PRESET STOP PAUSE/STEP - - BACKWARD FORWARD A-B REPEAT TV/VCR Enter radio stations a Accesses menu on a SPEED Pause playback or recording temporarily/press repeatedly for frame-by-frame playback. (x) PLAY (z) Starts (N) playback. BACKWARD (.) DVD: Search backward*/go to beginning of current chapter or track or go to previous chapter or track. VCR: Rewinds the - or * TV/VCR by for fast reverse tape in STOP mode picture the VCR FORWARD the TV tuner. (>) DVD: Search forward*/go or mode * To use To use 8 the use the same buttons for VCR and DVD functions VCR, first press the VCR button. the DVD, first press the CD/DVD button. (ex. PLAY). or to next track. VCR: Advances the ote search. Press and hold button for about two seconds. chapter This remote control DVD disc. (X/C) - or into frequency Displays functions on the TV screen. Acknowledges menu selection. PAUSE/STEP Repeat chapter, track, title, all. (easy) repeat (see page 36.) Repeats sequence. Selects recording speed. tuner menu DISC MENU REPEAT REC/ITR - Recording. by setup the tuner. ez To view channels selected DVD MEMORY/OK/ENTER - PLAY REPEAT A-B/SPEED/REPEAT - volume. and VCR activates Instant Timer (+/-) Accesses Stops playback. Records source AV3). -ING RETURN CM SKIP or SETUP/i MEMORY TUN AV2 Adjusts speaker CLK/CNT menu. 30 language. AV PR/TRK/PRESET CM SKIP Fast forwards or an the disc's Title menu, if (Tuner, AV1, RETURN Removes the subtitle Selects the VCR deck's To tune in the desired radio station. a Displays ENTER - language (DVD) (CD). available. SEARCH PR/TRK/PRESET(v/V): Select programme of VCR or Tuner Adjusts manually the tape's picture Selects MARKER (left/right/up/down) Selects preset stations from the audio an audio channel AV display. Switches among the clock, tape counter tape remaining modes on the display. - the TITLE and b/B/v/V on SUBTITLE ZOOM DISPLAY, CLK/CNT Accesses On-Screen track number Press to clear tuner memory. SEARCH Displays a program menu or a mark on the MARKER SEARCH menu. AUDIO MARKER Marks any BYPASS, LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. PRO CLEAR available. Accesses of the SOUND MODE POWER a menu. ANGLE Selects speaker DVD/CD/VCR receiver. EJECT OPEN/CLOSE 0-9 numerical buttons Selects numbered silence the Momentarily or screen. source. MUTE CD/DVD/VCR select buttons Select the input tape in STOP for fast forward picture search. Press and hold button for about two seconds. Rear Panel Connections S-VIDEO OUT Connect to a S-Video (DVD OUT) Input on TV. EURO AV2 AUDIO/VIDEO (VCR Connect to Set another video recorder. Top Box or IN+OUT/DVD OUT) FOR DVD VIEWING ONLY. SPEAKER CONNECTORS Connect the six supplied speakers PREATION AC Power Cord to Plug into the power source. these terminals. FRONT REAR (R 4 (R4 ) ) CENTER (4 ) REAR FRONT (L4 (L4 ) ) SUB WOOFER VCR IN+OUT/DVD OUT (8) AM EURO AV2 AUDIO/ VIDEO S-VIDEO OUT GND EURO AV1 AUDIO/ VIDEO FM SPEAKER AERIAL RF.OUT ANTENNA DVD/VCR OUT EURO AV1 AUDIO/VIDEO Connect to your TV set or (VCR IN+OUT/DVD OUT) another video recorder. RF. OUT Connect to a TV with RF cable. AERIAL Connect the aerial using this jack. FM ANTENNA CONNECTOR Connect the FM antenna to this terminal. AM ANTENNA CONNECTORS Connect the AM antenna to this terminal. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Remote Control Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 6m remote Angle: remote (20ft) from the front of the AAA AAA battery installation Detach the battery the remote control, and insert cover on (size AAA) batteries aligned correctly. sensor with the rear of two R03 and About 30° in each direction of the front of the sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 9 Connections TV & Set Box Top another VCR (or Connections) Rear of Set Top Box (or another VCR) VIDEO OUTPUT AUDIO OUTPUT D A FRONT (R 4 ) REAR (R4 ) CENTER (4 ) REAR (L4 FRONT ) (L4 ) SUB WOOFER VCR (8) AM EURO AV2 AUDIO/ VIDEO S-VIDEO OUT GND FM SPEAKER AERIAL RF.OUT EURO AV1 AUDIO/ VIDEO ANTENNA DV CR S R E SO VIDEO INPUT AUDIO INPUT IT Rear of TV AERIAL Make the one of the capabilities ips Depending following connections, depending existing equipment. on Caution -- Make sure directly door aerial to AERIAL 2 Connect the receiver S-Video connection Connect the S-VIDEO OUT the DVD/CD/VCR receiver is connected to the TV. Select the correct AV input on your Do not connect your DVD/CD/VCR receiver to TV via your VCR. The DVD image could be distorted by the copy supplied RF cable (R) from the jack on the rear panel of DVD/CD/VCR to your television's Aerial Input. RF. OUT receiver to the S-VIDEO IN Video cable TV. -- (A) from your indoor/ outjack on the rear panel of DVD/CD/VCR receiver. on connect, there (RF) Connect the aerial cable 1 your TV and other equipment you wish are various ways you could connect the DVD/CD/VCR receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. to Basic connections of your (S). otes The protection system. jack on the DVD/CD/VCR jack on the TV using the S- signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. Basic connections 1 (AV) Connect the EURO AV1 AUDIO/VIDEO on the panel of jacks on the DVD/CD/VCR receiver to the RCA You connect such can 2 VCR) the TV a RCA-SCART lead Set Top Box to the DVD/CD/VCR receiver SCART lead 10 using a (D). (or using rear input (E). another a RCA- When you connect the DVD/CD/VCR receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before tions. making any connec- Connections (Continued) Accessory Audio/Video (A/V) Connections Connect the AV 3 using the optional jacks on to DVD/CD/VCR receiver the DVD/CD/VCR receiver to the audio/video out jacks on your accessory component, audio/video cables. PREPA- RATION Radio Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. Connect the AM Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM (supplied) Loop aerial FRONT REAR CENTER REAR FRONT 4 (R4 ) (4 ) (L4 ) (L4 (R ) ) (supplied) SUB WOOFER VCR IN+OUT/DVD OUT (8) M S-VIDEO OUT GND EURO AV2 AUDIO/ VIDEO EURO AV1 AUDIO/ VIDEO FM SPEAKER AERIAL RF.OUT ANTENNA DVD/VCR OUT otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD/VCR receiver and other components. Be sure After to fully extend the FM wire aerial. connecting the FM wire aerial, keep it as horizontal as possible. 11 Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround Centre cords. sound, adjust the speaker parameters; distance, level, etc.. Speaker Front Speaker (Right) Front Speaker (Left) FRONT (R 4 ) REAR (R 4 CENTER (4 ) REAR (L4 FRONT ) (L4 AM SUB WOOFER VCR IN+OUT/DVD OUT (8) S-VIDEO OUT EURO AV2 AUDIO/ VIDEO GND EURO AV1 AUDIO/ VIDEO SPEAKER FM AERIAL RF.OUT ANTENNA DVD/VCR OUT Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use Do not 12 front remove speakers the front with low maximum cover of input rating, adjust supplied speaker. the volume carefully to avoid excessive output on the speakers. Connections (Continued) Speaker Positioning In the of normal case position the 6 use speakers (2 front speakers, centre speaker, 2 speakers rear and subwoofer). If you want to the excellent bass play sound, DTS digital surround or Dolby Digital surround, you should connect a subwoofer. ? ? Front speakers According to your listening position set up interval between speakers to 45 degree. the speakers for equal distance. And by hearing position set up the Centre The speaker centre speakers and front speakers the ideally are same height. But normally place it above or below the television. ? Rear speakers right behind surround sound playback. Place left and and install them at a ? wall or ceiling of case other, and set the listening area. These speakers do not install the results, above the level of the listener's to further In the a or the For best smaller rear disperse room speakers atmosphere required for listening position rear speakers towards too far behind the It is also effective to direct the the sound. size, if the audience is speakers ears. recreate sound motion and rear above 60 - 90 cm near to the rear than the listener's wall set the rear speakers opposite each ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker (Left) Speaker Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 13 PREATION Mini Glossary Glossary for Mini Audio Stream & BYPASS Software with multichannel surround audio Surround mode according You and of the identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. means was signals is played recorded. Sound Mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which to the way it enjoy surround sound simply by selecting one pre-programmed sound fields according to the can program you want to listen to. Press SOUND MODE repeatedly until the sound mode display window as below. you want appears in the Each time you press SOUND MODE button, the sound changed in the following order; mode is The PRO LOGIC channels of Dolby Digital surround format lets you enjoy up to 5.1 digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. 3D SURROUND → PLII MOVIE → → PLII MUSIC → PLII MATRIX → BYPASS "" When DVD is inserted. You can change the etc) by pressing the Use this mode when playing movie or Dolby Digital 2 channel "" which carries the mark. This mode provides the effect being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamof stream of DVD AUDIO button (Dolby Digital, DTS, PCM, the remote during play- on back. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Each time you press AUDIO button, the sound mode of DVD is as the following order; changed →→→ ic than before. For your reference (II) Dolby Pro Logic ? II creates five full-bandwidth from two-channel sources. output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. The DVD/CD/VCR Receiver memorizes the last mode settings ? for each source individually. identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. You can - MOVIE mode: - The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete - 5.1-channel sound. MUSIC mode: The Music mode is for and provides a with any stereo music recordings, deep sound space. The Music mode includes controls that allow the sound to be tailored to individual listening The Matrix mode is the the Music mode except that the logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the same as directional enhancement mono. 3D SURROUND This unit can produce a 3D Surround effect, using 3D Surround technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel Sound audio from a encoded with 14 home theatre. This feature works with DVD discs Dolby When you cy, the play Pro Logic and Dolby Digital audio tracks. sound tracks with 96kHz output signals will be converted frequency). tastes. MATRIX mode: audio to ote use wide and sampling frequen(sampling to 48kHz Before Operation - VCR part Video channel Set Video channel Using your Receiver for the very first time is the channel (RF output channel) on which your TV receives picture and sound signals from the DVD/CD/VCR receiver through the RF cable. If you have used to tune your channel is back on a RCA-SCART lead you will not have TV, simply select the AV channel. The AV already pre-tuned for optimum video play- your TV. For the following steps we assume that you have just connected your Receiver for the very first time. To make tuning TV stations an easy task your Receiver incorporates the Automatic Channel Memory System (ACMS). 1 following steps only if interference appears picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connec- This system will automatically tune and store TV channels in your Receiver. Make sure that you have DVD/CD/VCR receiver. correctly installed your Press POWER to turn your DVD/CD/VCR Perform the in the TV tion to AV 1 2 3 Turn connection, on vise or 2 If the initial Menu Screen doesn't appear on screen, sure that you have tuned your TV to a video versa. make channel. Or if this is correct it may mean that your DVD/CD/VCR receiver is already tuned. DVD/CD/VCR receiver and TV. Set the vacant position Press POWER on the standby dimmed). 39 on on receiver. your TV. the remote control to enter mode (the clock indicator will be ACMS Pr-12 OKi ACMS 4PressandholdPROGDorEonthe DVD/CD/VCR receiver for than 4 more secs. RF 39 will appear in the DVD/CD/VCR receiver The following picture will be displayed on display. 3 Press OK to start the automatic tuning process. the TV screen. 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 S E Pr-12 i ACMS RF P R If the is CHANNEL 39 i SET is snowy, move to step 5. If the picture press POWER on the DVD/CD/VCR picture clean, 4 Press i to remove the menus from the TV screen. receiver to finish. 5 Press PROG D er E on the DVD/CD/VCR receiv- or to set the video channel to a between 22 and 68 which is not any local station in your vacant position occupied by area. ote The RF channel will not change until step 6 has been executed. 6 Press POWER store the new on the DVD/CD/VCR receiver to RF video channel into the DVD/CD/VCR receiver memory. Now tune your TV set to the new DVD+VCR RF channel. ote If the TV picture was clear in step 4, do not retune your TV. 15 PREATION LH-C6231W NA3SCLS Before How to Operation the main use This DVD/CD/VCR receiver the by using The menus VCR part - Tuning menu easily can displayed be programmed on screen. controlled from the Remote Control menus are Handset. your TV set and DVD/CD/VCR receithe POWER. on by pressing ver Automatically Should you wish to perform the Automatic Channel Memory System (ACMS) again please follow the guidance given on this page. You may tune up to 88 TV stations into your DVD/CD/VCR receiver. Switch 1 in TV Stations 1 Press POWER to turn on your DVD/CD/VCR receiver. Press i. 2 The main menu will appear the TV on screen. 2 3 AB C 12 REC PSET R Pr-12 ACMS ON OFF TIME DATE SYSTEM menu Press F or will appear on the TV screen. G to select ACMS and press OK. VCR Dr. OSD REC NIC fOSD Press i. The main OKi OPR ACMS REC Pr-12 Timer recording setting (see p. 26-27). OKi ACMS PRSET Manual tuning setting (see p. Press OK 17). 4 process. ACMS ACMS (Automatic right column). Channel again setting (see tuning Memory System) (see TIME DATE Date & clock to start the automatic p. 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 19). SYSTEM O To set the Colour TV System (see p. 19). S ABC OSD O To language setting for OSD. language from English, Russian, German, French, Polish, Czech and Hungarian. can select the Dr. O To check a problem with your DVD/CD/VCR receiver (see p. 36). fOSD ON/OFF O To display the To improve (see p. operational (see the or p. 36). 5 playback picture (see p. 24). deactivate the NICAM 3 Press 1 4 Press OK and press 5 Press i to return to 16 digital sound 37). or 2 00 PR-01 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 PR-07 PR-08 MOVE : DELETE : , OKi mode of your NIC To activate C02 02 RSET OPR O 01 P DVD/CD/VCR receiver O i the change You E Pr-12 ACMS to select the desired a 3 or 4 TV menu. to select. picture. Press i to screen. remove the menus from the TV Before Tuning In certain Operation - in TV Stations areas of the VCR part Manually 5 country broadcast signals may will Searching Control the fine or stop when it locates tuning of the station a station. by pressing D E. be too weak for your DVD/CD/VCR receiver's automatic process to find or assign TV stations correctly. tuning You must tune in these weaker broadcast stations ually man- in order for your DVD/CD/VCR receiver to store PR CH MFT 07 C02 +04 them. CHANNEL/CABLE AV : P 1 2 RSET Press i. The main Press F menu or will appear on the TV PR CH MFT C02 00 CHANNEL/CABLE 3 PR Press G to select STATION and press OK. AV : 07). PR CH MFT 07 C02 +04 STATION P RSET i 7 Press i and press D or E to select the programme number that you want to tune (for example, 6 STATION P SET R i screen. G to select PR SET and press OK. 01 PREATION STATION Press OK. E to select letters and numbers for Press D or the station new Press F or OK i name. G to move back and forth between characters. Press OK. 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 S07 00 PR-06 07 08 -- -- ----- -- -- ----- P RSET MOVE : DELETE : , PR CH MFT STATION 07 C02 +04 TV2 OKi P RSET PR CH 07 C-- MFT -- ----- CHANNEL/CABLE Press i, confirm the station RSET i Press AV to select C (Standard stations) C02 - C70, S01 - or S S41. 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 S07 00 PR-06 07 C02 +04 08 -- P RSET Enter the channel number of station that you want to tune with the numerical buttons. 9 Press i to CH MFT C40 00 STATION CHANNEL/CABLE P RSET : remove the TV2 -- ----- MOVE : DELETE : OKi , menus from the TV screen. Your PR 07 placement. AV : P 4 (Cable stations): 8 STATION OK i new TV station has now been tuned into your DVD/CD/VCR receiver. AV i If you wish to 1 8. stages manually tune other stations repeat - 17 Before Operation - VCR part the order of TV Stations Changing After tuning TV stations into your DVD/CD/VCR receiver you may wish to change the order in which they are stored without having to retune them. The instructions given move this page will show you how you them into your desired order on can simply The main Press F After tuning TV stations into your DVD/CD/VCR receiver you may wish to delete a station. The instructions given on this page will show you how to easily delete any unwanted TV stations. 1 Press i. 1 TV Stations Deleting will appear on the TV screen. G to select PR SET and press OK. Press i. The main menu will appear on the TV or Press F G to select PR SET and press OK. or PR PR 01 CH MFT C02 00 01 STATION CH MFT C02 00 STATION CHANNEL/CABLE CHANNEL/CABLE P RSET : P RSET AV Press D or E to select the programme number you want to Press G. move (for example, PR 2 C02 Press D E to select the programme number or you want to delete 03). C02 00 C03 00 PR-02 03 PR-02 C05 C06 00 04 00 PR-03 PR-04 00 PR-03 00 PR-04 PR-05 05 06 C04 C07 00 00 PR-05 PR-06 07 C08 00 PR-07 08 C09 00 C03 00 03 C04 04 C05 C06 00 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 RSET 3 or PR 03). PR-01 PR-08 MOVE: P RSET DELETE : OKi , OKi E to select the programme number you want to (for example, 02 P Press D i PR-01 00 02 05 AV Press i. 01 01 : i Press i. 2 screen. menu move to (for example, PR 05). 3 Press F. After a short while, the selected station will be deleted. 01 C02 00 PR-01 01 C02 00 02 C03 00 C03 00 00 03 C06 00 PR-02 PR-03 04 C05 C06 00 PR-02 PR-04 PR-05 02 03 05 C04 00 PR-03 04 05 C04 C07 00 00 PR-04 PR-05 06 C07 00 PR-06 06 C08 00 07 C08 00 PR-07 07 C09 00 08 C09 00 PR-08 08 -- PR-01 PR-06 PR-07 -- ----- MOVE: P RSET 4 P OKi 4 Press OK. The selected programme will be moved to the new programme number. C02 00 PR-01 02 C03 00 PR-02 03 00 04 C05 C06 00 PR-04 PR-05 05 C04 00 PR-03 06 C07 00 PR-06 07 C08 00 08 C09 00 RSET 5 Press i to remove If you wish to 18 move remove the , menus OKi from the TV screen. If you wish to delete other TV stations stages 1 3. repeat How to select Stored TV stations: Stored TV stations can be selected in either of two ways. PR-07 PR-08 MOVE : DELETE : , Press D OKi or E to select different stations that are tuned into your DVD/CD/VCR receiver. the menus from the TV screen. 1-4. Press i to : - 01 P DELETE RSET other TV stations repeat stages You may also directly select stations using the numerical buttons on the remote control. Before Setting 1 Operation the Clock - VCR part To set the colour Manually Press i. Press F system Your DVD/CD/VCR receiver is or G to select TIME DATE and press OK. colour standard, you can play equipped back with dual tape in PAL and a MESECAM. During playback your DVD/CD/VCR receiver detects the system automatically. If there is any colour problem please select the colour system manually. colour HHMMDDMMYY -- :. - - -- -- -- --- . 12 TIME DATE 2 i Use the numerical buttons on 1 press / or the remote control to alter the or F/G HOURS, MIN- 2 Press i. The main Press F will appear menu or the TV on screen. G to select the SYSTEM. UTES, DAY, MONTH and YEAR. Please note your DVD/CD/VCR receiver uses a 24hour clock. e.g. 1pm will be displayed as 13:00. The of the week will appear you enter the year. day automatically 12 when REC P SET R Pr-12 ACMS ON OFF 3 SYSTEM TIME DATE AB C VCR Dr. OSD SYSTEM NIC fOSD OKi OPR Press OK and press D to the COLOUR E to select or according system used. HHMMDDMMYY 11 AUTO: :. 4510103WED . Allows PAL 12 TIME DATE i or MESECAM to be signals distinguished automatically. PAL: 3 If you make a mistake, press F the correct details. 4 Press i to remove the menus or G and enter from the TV screen. Your on Use when back a PAL signals or use when playing MESECAM: Use when playing receiving back tape a MESECAM signals or use recorded in MESECAM when system. stored and will appear your DVD/CD/VCR receiver's Display. new clock receiving tape recorded in PAL system. settings are REC fOSD ON OFF 4 Press F D or or AUTO PAL MESECAM SYSTEM AB C OSD VCR Dr. SYSTEM OKi OPR G to select the RF AUDIO and press E to select according to the RF AUDIO used. REC fOSD ON OFF 5 Press i to RF I/I RF B/G RF D/K SYSTEM AB C OSD VCR Dr. remove SYSTEM OKi OPR the menus from the TV screen. 19 PREATION Before General This manual Operation - DVD part Explanation operating the DVD/CD/VCR receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD/CD/VCR receiver or is not available on the gives numbers General screen. playback Temporary Some items On-screen 1 2 can be Repeat Chapter Repeat Track Repeat All Tracks Repeat A-B Repeat Off ALL be AB OFF Press 3/4 to select an an item. For some setting functions, setting. Title TRACK Resume Action during playback. The selected item will be number). CHAPT display operation Press DISPLAY title of setting be also be used for Feedback Field Icons Repeat TITLE displayed on the TV changed on the menu. can (e.g., can press ENTER to execute the Display status the change The number buttons basic instructions for disc. On-Screen Press 1/2 to 3 play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available otes item. Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. highlighted. on-screen DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language Digital Audio Output mode and Subtitle language Angle 5.1 CH ABC OFF 1/1 Sound VCD2.0 D BYPASS skips to the desired title number. Shows the current chapters, and Shows the number and total number of chapter skips to the desired chapter elapsed playing time, and point directly from the elapsed searches the number. time. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and angle number and total changes the angle number. Shows the current sound changes the 1/2,or Numbers, ENTER 1/2,or Numbers, ENTER Numbers, ENTER 1/2,or AUDIO 1/2,or SUBTITLE Shows the current angles, and setting. mode, number of and setting. 1/2,or ANGLE 1/2,or SOUND MODE Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time 0:20:09 Audio Channel and PBC On Shows the mode, BYPASS changes and number, total number of tracks skips to the desired track number. elapsed playing Shows the audio STER. 20 and VCD1.1 Items Sound titles, Selection Method channel, (Display only) and the setting. 1/2,or Numbers, ENTER -- 1/2,or the audio channel. Shows the current sound changes time Selection Method AUDIO mode, and 1/2,or SOUND MODE Before Initial Operation - DVD part (Continued) Language Settings You can set your own Personal Preferences DVD/CD/VCR receiver. on the Disc Language Select DVD language a for the disc's Menu, Audio, and Subtitle. General Operation original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 41. If you enter the wrong language Original Other 1 Press SETUP. The setup menu appears. : : The To select another code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Disc Audio Original Rating German Disc Subtitle English Spanish Disc Menu French Italian Rating German Country TV Menu 5.1 Code Aspect Language Chinese Country Polish TV Hungarian Menu Spanish Code Italian Aspect Chinese Language Other------------ Speaker Setup Polish Hungarian Others 5.1 Other------------ Speaker Setup Others 2 Press 3/4 to select the desired item. The screen selected will show the current item, as well as setting for the setting(s). alternate Menu Select 3 4 While the desired item is selected, press 2, then 3/4 to select the desired setting. you Language a see language Press ENTER to confirm your selection. Some items require additional steps. 5 setup SETUP, RETURN, or setup menu. Disc Audio Chinese Disc Subtitle This is the menu English Disc Menu Rating Country TV Press for the when you press SETUP. Menu PLAY to exit the Code Aspect Language menu. 5.1 Speaker Setup Others Picture TV Aspect DVD 4:3 Letterbox: Select when nected. Displays a standard 4:3 TV is theatrical above and below the images picture. 4:3 Panscan: Select when a with masking con- bars conventional TV set is connected. The video material formatted in the Pan & Scan style picture are is played off). back in that style (Both sides of the cut 16:9 Wide: Select when a 16:9 wide TV is connected. Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating Country TV Menu 5.1 Code Aspect Language Speaker Setup Others 21 PREATION Before Operation - DVD part (Continued) Speaker setup 5.1 Auto Speaker settings DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 35.) Play DVD You can disc automatically set up the DVD/CD/VCR receiver so a DVD starts playing whenever the DVD is inserted. If Auto Play mode is set to receiver will search and then On: Auto Off: Auto play Play Play a On, this DVD/CD/VCR title that back the title playback time automatically. is longest function is activated. function is not activated. Disc Audio Disc Subtitle R Disc Menu ote Code Country TV Volume Small Distance Language The Auto 0 dB Size Aspect Menu R Front L Rating 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, Vocal, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC Rating Auto Aspect Menu 5.1 Off Code Country TV On Play Language Speaker Setup Others Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to audio digital technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the at quietest ones). Then, you may losing clarity lower volume without a listen to a movie of sound. Set DRC to On for this effect. Vocal Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are CDs. 22 to On or Off. played according to the PBC. played the same way as Audio Play function may not work for some DVDs. Before Operation DVD - part (Continued) Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country to the applies complete the disc. These scenes on disc from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are are TV 6 5 Rating 1 4 Code 3 Aspect Speaker Setup Unlock Speaker Setup Select the Others using Country 2 step 3 4 5 6 selection, Code is 1 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. 3 of Shift the "Rating" to create a is selected, press 2. "Rating" personal 4-digit security password. then 4-digit password again and tons to confirm the Changing pass- If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Ratings 1 to 8: Some discs contain scenes played. Higher rated unless an alternative scenes scene is available The alternative must have the lower one. back will or 5 If no the same on rating suitable alternative is stop. You change will not be played level in 1 Follow Enter the old 3 Select Steps 4-digit 1-2 as code shown above to the left (Rating). code, then press ENTER. Change using 3/4 buttons then press ENTER. 5 new 4-digit code, then press exactly the same code a second fy by pressing ENTER. 6 Press SETUP to exit the 4 Enter the ENTER. Enter time and veri- menu. If you If you forget forget 4-digit your your password, code to clear the current pass- the disc. or a mode.) found, play- 4-digit password order to play the disc. Press ENTER to confirm your rating then press SETUP to exit the menu. the is necessary when the 4-digit code" word, follow the procedure below.(in the NO DISC must enter the rating button and select the not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be the 3/4 buttons. 3/4 buttons. 4-digit password changed (see "Changing 2 a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. using ote below.). personal 4-digit security left. Confirmation of the the code is word, then press ENTER. on Press ENTER to confirm your country code then press SETUP to exit the menu. When you have already registered a password; Enter a 4-digit password using the numbered but- Select using 2 using cursor second character press ENTER. Enter the press ENTER to verify. on selected, press 2. Select the first character Select the 3/4 buttons menu. Follow Change Code Country setup While 2 Language 1 5.1 Language Others Disc Menu Menu Code Aspect Menu 5.1 7 TV SG Rating Country 8 Disc Subtitle Country PREATION Code Set Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list List", page 42). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated whose standards country/area Code (See "Country to or scenes are a used to rate the DVD video selection, 1 Press SETUP to 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". The 3 4-digit password Enter a new code is cleared. as shown above to the left (Rating). ote This function may not work for some DVDs. 23 Operation Playing You will tape tape a only with be able to load and eject video cassettes plugged into the 5 when your DVD/CD/VCR receiver is mains. play back record- a When cassette is inserted and During picture playback started, the tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press either PR/TRK (v/V) on the remote control or PROG/TUNING (v/V) on the front panel to manually adjust the tracking until any distor- tions have been removed. Press numbered button 0 the remote control to switch automatic tracking back the shuttle, the noise bars may picture according to the status of If distortions be can Press STOP 6 (v/V) to end (x) in the seen on picture, reduce the remote control. playback. Press EJECT. If the end of the on tape is reached, your DVD/CD/ stop playback automatically, the top of the tape, eject the tape VCR receiver will on rewind, stop at Make sure that you have correctly connected DVD/CD/VCR receiver as described earlier your in this book. your TV. Press POWER to turn on on your DVD/CD/VCR receiver. Insert the video cassette into your DVD/CD/VCR receiver. The video cassette should have the window side facing up and the arrow away from you. facing Press PLAY (H) to start playing your tape. If you load a video cassette which has had its record protection tab removed, playback of the cassette will start CM (Commercial Message) Skip: When playing back tapes, this feature lets you skip through commercial breaks by fast-forwarding, and then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or other programme material). Repeatedly press CM SKIP to skip: The tape will fast forward picture search through 30 seconds of recording for each press of the button. automatically. AUTO TRACKING Your DVD/CD/VCR receiver will adjust the to tracking Press PAUSE/STEP Press PAUSE/STEP the give the automatically best picture quality. (X) to still a picture. (X) repeatedly to advance tape frame by frame. If you press FORWARD, the picture will be slowed down at about 1/19 times the normal playback. can be paused for up to 5 minutes. After 5 minutes your receiver will stop the tape to prevent from damage to the tape or your receiver. Tapes Still picture quality can be improved slightly by pressing PR/TRK (v/V) on the remote control. 4 on then power off. Turn 3 slow motion and them with PR/TRK again. 2 shuttle, press the tape. automatic 1 or reach the desired function. appear Getting a can To switch off the slow motion and Your DVD/CD/VCR receiver may also ings from NTSC tapes (on PAL TV). better still picture press F or G. following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) During playback You Press PLAY (H) to continue playing OPR 1 Press 30 seconds 2 Presses 60 seconds 3 Presses 90 seconds 4 Presses 120 seconds 5 Presses 150 seconds 6 Presses 180 seconds (Optimum automatically improves playback picture quality by adjusting your DVD/CD/VCR receiver to the condition of the 1 2 Press F or the playback) or fRE O ON OFF where you 3 Press D or or E OFF SOFT SHARP 12 TIME DATE SYSTEM AB C OSD or rewind press and hold FORpicture will be played a BACKWARD. The playback speed. 4 VCR Dr. OPR i OPR repeatedly to select: OFF, SOFT SHARP. Please note you may set OPR back at 7 times normal 24 seeing tape. Logic search: During fast forward WARD while G to select OPR and press OK. your tape. press either FORWARD or BACKWARD. This will enable you to rapidly wind the tape times normal tape. Press i. During playback (7 Response): This feature Picture search: are on Picture only when playing tape. Press i to screen. remove the menus from the TV back Operation with tape The DVD/CD/VCR receiver allows you to make recordings using a variety of simple methods: Instant Timer diately runs for Recording (ITR): period of time or set a Starts recording 6 time (up 7 incorporates Long Play (LP) record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. sound quality when using a slight loss in Press PAUSE/STEP unwanted picture and LP. 1 Make that you have correctly connected your DVD/CD/VCR receiver as described earlier in this book. sure Insert on your DVD/CD/VCR up and the arrow recording. Tapes will be be paused for up to 5 minutes; RECP displayed when a tape is paused. After 5 can minutes your DVD/CD/VCR receiver will stop recording to prevent damaging the tape or your protection facing (x) twice within 5 seconds to end Press EJECT EJECT will appear seconds. on (Z). the TV screen for a few otes If you do not wish to record tab into your DVD/CD/VCR receiver. The video cassette should have the window side facing 3 video cassette with a to continue mode and ITR is cancelled. 8 recording. receiver. 2 (X) recording DVD/CD/VCR receiver. Recording (ITR) Press POWER to turn to avoid If you press PAUSE/STEP (X) during ITR, the DVD/CD/VCR receiver will enter the record pause Press STOP Instant Timer (X) scenes. Press PAUSE/STEP which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will Please note there will be recording. to 1 month from the The DVD/CD/VCR receiver to start press will increase the record time by 30 minutes until you reach a maximum of 9 hours. out. Recording: You may record at a later present). Up to 7 of these automatic recordings may be set. (z) RECORD will appear on the TV screen. Press REC/ITR several times. Each successive imme- until the video cassette Timer Press REC/ITR pen quite easily tab on the back It is on a tape (this can hapby accident!) remove the protection edge of the video cassette. possible to record on a video cassette protection tab removed by covering record with self adhesive away from you. Press PR/TRK (v/V) to select the programme number you wish to record. You may also directly select programme numbers using the numerical buttons on the remote con- with the the hole tape. Remember you can record one programme while watching another by starting your instant recording, pressing TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. trol. 4 If you wish to record directly from either of the SCART sockets or AV3 sockets, repeatedly press AV until the socket you wish to record from is displayed. AV 1 for recording from EURO AV1 socket of your DVD/CD/VCR receiver. AV 2 for recording from EURO AV2 socket on the on the rear of your DVD/CD/VCR receiver. AV 3 for recording from AV3 sockets on the front of rear your DVD/CD/VCR receiver. 5 Press SPEED if you wish to record in Standard Play. Long Play or SP will produce improved picture provide twice as however LP will time as and sound much quality, recording SP. 25 OPERATION with Operation Timer tape If you press OK before entering the date you may select one of the following automated recording features. Press F or G to select, then press OK to confirm. recording using On Screen Display You may set up to seven timer record events within month of the current date. PLEASE NOTE! before the timer make setting one DLY To record every day (except Saturday and the same time. record at the same time every week. Sunday) at Weekly To sure that you have set the DVD/CD/VCR receiver clock correctly and you know which channels on your PR In stage 4, if you a DATE PR-04 DVD/CD/VCR receiver you have tuned to TV stations. want to record from either of the -- -- -- -- -- -- -- -- -- -- -- -- -- 1 Insert the on front, press AV video cassette with protection up and the arrow facing or tab into full press D are remove -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ DELETE: Press OK to start or E to and PR SP -- 7 SP -- SP -- TIME 16 1900 :: 2000 SP :: SP 0 - display (AV1, AV2 PR -- or -- -- -- -- -- -- -- -- -- -- -- -- -- -- Intelligent -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ -- :: -- -~ -- :: -- -~ -- :: -- -~ -- :: -- -~ -- :: -- -~ -- :: -- -~ or 8 Press i to -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -~ -~ :: -- -~ :: -- -~ SP SP -- SP -- SP -- SP -- TIME 16 19 :: 002000 SP :: SP -- -- -- -- -- -- -- -- -- -- ~ -- -- -- -- -- -- SP -- -- SP are correct. -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- SP -- SP -- SP -- SP -- SP -- SP SP i SP SP TIME -- -- :: -- DATE -- -- Press i to 9 If you SP SP SP SP SP SP SP i remove the menus. want to make other timer stages 10 :: :: -- save -- 5 the programme. -- -~ your settings. If PLEASE CHECK is displayed, you have entered data incorrectly and will need to re-enter the data. Press the numerical buttons to enter the date of -- -~ Recording SP i DATE -- Check that the timer event details . TIME -- -- :: first, then the chan- 03. You may also - LP PR-04 -- PR-04 -- PR -- PR -- When you set the tape speed to "IP", the DVD/CD/ VCR receiver automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer- recording in SP mode. AV3). or DATE -- ~ -- Press G to select the recording speed and pressDorEifyouwishtorecordinIPorLP. Once selected press G. 26 DATE -- OK i If you want to record from either of the SCART sockets AV INPUT on the front, repeatedly press AV for the correct -- i the timer record event. by pressing SP -- -~ SP -- selecting stations 1 9, press number; for example Stations 3 select Channels -~ SP -- Press the numerical buttons to enter the station nel -- SP -- that you wish to record. When SP -- SP -- , setting -~ :: -- TIME -- -- SP -- Please note your DVD/CD/VCR receiver uses a 24hour clock. e.g. 1pm will be displayed as 13:00. You may also select the start and end times by or . pressing Press F to delete the event. 3 4 -- PR-04 DATE -~ :: -- SP -- :: -- SP -- -~ :: -- SP -- -~ start and end times of the programme that replace. PR -~ you wish to record. away from you. select the event that you wish to -- Press the numerical buttons to enter the record- 6 ing G to select REC and press OK. If all timer record events -- :: OK i Press i. Press F -- :: SP DLYSUMOTUWETHFRSA . your DVD/CD/VCR receiver. The video cassette should have the window side facing 2 a AV3 or :: -- -- -- SCART sockets TIME -- -- 2 - recordings repeat 8. Press POWER to switch your DVD/CD/VCR receiver to Standby. will appear in the DVD/CD/VCR receiver's diswhile your DVD/CD/VCR receiver waits to play make the recording. If the DVD/CD/VCR receiver is DVD mode, even with the DVD/CD/VCR receiver is power on, it will record any timer programme. To stop the timer recording, press POWER twice. Operation with If Timer record events tape Overlap... Change (Deleting) Do not overlap programmes, since overlapping portions conflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. of the Example: Programme the Timer Programme If at a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press D or E to select the event that you wish to delete or change. the Press F to delete the event...or 1 will be recorded in its the last 30 minutes of Programme entirety, but only 2 will be recorded. Press OK to change, then press F or G to select; Station, Date, Start and End times and LP. Press D or E to enter the correct information. PROGRAMME 1 17:00 16:00 17:30 16:30 PROGRAMME 2 (This portion If two programmed will not be timer recorded.) recordings overlap at midnight 00:00 a.m., programme 2 will not be recorded. 27 OPERATION Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD VCD2.0 General Features VCD1.1 the TV and select the video input ote source con- the system: Turn input source on the audio 2 3 system and select Moving Press OPEN/CLOSE to open the disc tray, Press OPEN/CLOSE to close the READING appears automatically. on If tray. might appear The is may be displayed first after Video CD which offers a menu. menu screen DVD or loading a than one title, you can move to DISPLAY, then press the appropriate number (0-9) to select Press 1 2 to select Moving title a title number. a a title, then press ENTER. to another CHAPTER/TRACK on a more chapter/track 1/3 1 /12 VCD1.1 disc has displayed more follows: Press When a menu screen as button DVD instead. If disc has a another title with the the TV screen, and playback does not start, menu DVD 1/3 playback press PLAY. In some cases, the disc to another TITLE tray. When Load your chosen disc in the playback side facing down. starts use connected to the DVD/CD/VCR receiver. 1 otherwise, all operations described the remote control. Some features may also be available on the Setup menu. nected to the DVD/CD/VCR receiver. Audio Unless stated disc has than as one more than track, you one chapter can move or a to another follows: Press .or > briefly during playback to return to beginning of the current chapter/track or to select the next chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, the DVD Use the 1 234 buttons to select the want to view, then press ENTER Press TITLE or title/chapter you playback. to start DISC MENU to return to the menu press DISPLAY. Then, press 3/4 to select the screen. VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting the operating procedures for depending on the disc. using may differ Follow the instructions on the each You also may set PBC to Off under 22. menu screen. setup. See page If Parental Control is set and the disc is not within the the 4-digit code must be entered and/or the disc must be authorized (see "Parental Control", on page 23). DVDs may have a region code. Your DVD/CD/VCR receiver will not have regional code regional code for this a otes For two-digit numbers, press the numbered buttons (0-9)in rapid succession. OnaVideoCDwithPBC,youmustsetPBCtoOffonthe setup menu to use the Repeat function. See page 22. Search otes Rating settings (not authorized), VCD2.0 DVD 1 Press and hold . or VCD1.1 > for about two seconds during playback. The receiver will now go into SEARCH mode. 2 Press and hold . play discs that different from your receiver. The receiver is 3 (three). or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To return to normal 28 1 menu screen. and the exact menu chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9) or press 2 to select the chapter/track, then press ENTER. play, press PLAY. with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD VCD1.1 To during playback. The DVD/CD/VCR receiver will A? " play, VCD2.0 2 Press BACKWARD go into PAUSE now 1 Press DISPLAY (.) FORWARD or display (>) point. -:--:-- appears The during playback. the on at playing on-screen screen. elapsed playing time of the current disc. 2 Within 10 (.) or FORWARD (>) to select the required speed: t 1/16, t 1/8, t 1/4, 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2 (forward). To return to playback, press PLAY ( B). seconds, press 3/4 Search icon in the t on-screen to select the Time display. The "-:--:--" appears in the Time Search box. 3 Within 10 the seconds, required use the number buttons to enter start time. Enter seconds from left to right hours, minutes, and in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. ote Slow motion playback in is not reverse applicable 4 Within 10 seconds, press ENTER confirm the start time. for Video CD. Playback an Repeat DVD VCD2.0 invalid starts from the selected time TRACK ALL This unit repeat the currently playing chapter, press REPEAT. Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press REPEAT Title icon appears Repeat mode, Repeat Video CDs - Repeat on on VCD2.0 DVD point. VCD1.1 a the TV the TV 3D SUR can produce a 3D Surround effect, which playback conventional stereo instead of the five speakers, speakers normally required multi-channel audio from a from two screen. a or to listen to home theater system. 1 Press SOUND MODE to select "3D SUR" press REPEAT Off icon appears current simulates multi-channel audio more second time. Repeat the disc. If you enter OFF Repeat Chapter/Title/Off - on press PLAY to VCD1.1 BYPASS DVD Video Discs or time, playback will continue from the 3D Surround TITLE CHAPT during playback. third time. 2 To turn off the 3D Surround screen. MODE again effect, press SOUND to select "BYPASS". Track/All/Off repeat the track currently playing, press REPEAT. The 2 To 0:20:09 DVD The Time Search box shows the pause mode. The DVD/CD/VCR receiver will enter SLOW mode. 1 To at your chosen end The Time Search function allows you to start any chosen time on the disc. (X) during playback. 3 Use BACKWARD The again starting point. screen. briefly on the TV screen, and the repeat begins (" A↔B" appears the display window). sequence mode. 3 To exit the TV VCD1.1 The DVD/CD/VCR receiver will The on press PLAY. DVD 1 Press PAUSE/STEP 2 To briefly appears Time Search Slow Motion The title: a 3 To cancel the sequence, press REPEAT A-B. 3 To return to normal 1 To sequence in a VCD1.1 "AB" appears control. 4 VCD2.0 OFF 2 Press REPEAT A-B advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote can during AB repeat " go into PAUSE now DVD 1 Press REPEAT A-B at your chosen mode. 2 You A* Frame-by-Frame Playback 1 Press PAUSE/STEP A-B Repeat (continued) Repeat Track icon appears on the TV screen. repeat the disc currently playing, press REPEAT a second time. The Repeat 3 To exit The All icon appears on the TV screen. Repeat mode, press REPEAT Repeat Off icon appears on the TV a third time. screen. ote On a setup Video CD with menu to use PBC, you the Repeat must set PBC to Off on the function. See page 22. 29 OPERATION with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the normal resume playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. ote The Zoom function may not work for some 2 The DVDs. VCD2.0 DVD menu, the list menu can menu menu will appear angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on may appear. again. VCD1.1 Disc Menu MARKER SEARCH 1/9 a Otherwise, the disc and subtitle 3 To Marker Search DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press DISC MENU. You nine can points To enter 1 start playback from memorized a point. Up be memorized. can The disc to 2 To mark, follow these steps. a Camera memorize. The Marker icon will appear 2 on the TV 1 to enter up to nine Marker Repeat step points on a disc. To Recall 1 a Marked Scene disc During playback, The MARKER SEARCH menu will appear the screen. 3 Press ENTER. will start from the Marked scene. the MARKER SEARCH menu, press SEARCH. To clear 1 a During playback, The MARKER SEARCH 2 3 press SEARCH. menu will appear on the screen. scenes 1/1 recorded at different camera angle appears on the TV Changing the Audio Language Press AUDIO ferent audio repeatedly during playback language or audio track. D DVD 5.1 CH to hear Changing the Audio Channel Press AUDIO repeatedly during playback to hear (STER., LEFT or RIGHT). DVD VCD2.0 ABC dif- a VCD1.1 dif- a 1 ENG Press SUBTITLE different subtitle Press CLEAR. 4 Repeat steps 5 To repeatedly during playback languages. to see the ote 2 and 3 to erase additional Marker numbers. remove SEARCH. a screen. erase. The Marker number will be erased from the list. 30 DVD angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. Subtitles Press 1/2 to select the Marker number that you want to press ferent audio channel Marked Scene disc play, 1 ENG on recall. remove Angle The number of the current seconds, press 1/2 or use the number buttons to select a Marker number that you want to 4 To to return to press SEARCH. 2 Within 10 Playback menu or again. If the disc contains briefly. screen displayed. the disc remove DISC MENU During disc playback, press MARKER when playback reaches the spot that you want to is menu the MARKER SEARCH menu, press If appears, the feature is not available on the disc. with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3/WMA Discs CD MP3 Notes on MP3/WMA About MP3 WMA The DVD/CD/VCR receiver can An MP3 file is audio data MP3/WMA format- play recordings on CD-ROM, CD-R or CD-RW discs. playing MP3/WMA recordings, read the notes MP3 Recordings on right. MPEG1 audio ted Before files that have on The player compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". can not read extension other than 1 Insert a Recordings disc and close the an MP3 file that has OPERATION file a ".mp3". tray. Audio CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 About screen a technology. WMA(Windows compression of MP3/WMA Media WMA(Window An WMA file is Audio) Microsoft audio Media Audio) compression offers double the audio the MP3 format. JPEG Press 3/4 to select the MP3/WMA then press ENTER or PLAY. 2 The MP3/WMA menu Press RETURN to choice appears on the TV screen. to the MP3/WMA-JPEG MP3/WMA Disc 1. 2. menu. as follows: Sampling Frequency / only at 44.1kHz (MP3), 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback 22.05 move with this DVD/CD compatibility receiver is limited - - - Program MP3/WMA 3. TRACK 1.mp3 TRACK 2.mp3 4. TRACK 3.mp3 TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 TRACK 7.mp3 Clear All TRACK 8.mp3 00:00 1 MP3/WMA files. We recommend that you use "Easy-CD Creator", which creates an ISO9660 file OFF system. Press 3/4 to select a folder, and ENTER 3 A list of files in the folder appears. or PLAY. 5. A single track, it Press 3/4 to select 4 a track then press PLAY the current track's elapsed playing Press TITLE to Audio CD menu Program CD move to the previous TRACK TRACK TRACK03 TRACK TRACK04 TRACK TRACK05 TRACK TRACK06 TRACK TRACK07 Clear All TRACK08 STER. 0: 56: 18 BYPASS 1.mp3 2.mp3 3.mp3 4.mp3 5.mp3 TRACK 6.mp3 7.mp3 TRACK 8.mp3 00:00 Clear All 1 OFF ip If you are use in 5 file list and want to return to the Folder the 3/4 to return to the To a and highlight previous menu screen. stop playback files, format all the data in or use a new one. names should be named incorporate ".mp3" e.g. "********.MP3" or using or 8 letters or less ".wma" extension "********.WMA". Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. This DVD/CD/VCR receiver requires discs/recordings to meet certain technical standards in order to achieve TRACK01 TRACK02 MP3/WMA files. If you wish playback MP3/WMA MP3/WMA files in the MP3/WMA file in the 1st menu Program MP3/WMA requires no 7. page. MP3/WMA File and must menu. to the next page. move Press DISC MENU to cannot playback the disc 6. time will appear on the display window and Playback will stop at the end of the disc. list, to or ENTER. Playback starts. During playback, session disc first track. If there is at any other press ENTER to optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files). That require certain preexisting conditions (see above) to insure compatible playback. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no grant such permission. Permission should right to time, press STOP. always be sought from the copyright owner. 31 with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP ENTER during playback. or CD another Track MP3 or WMA can CD produce a 3D Surround simulates multi-channel audio effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from a home theater or > briefly during beginning to return to the of the current to briefly step back to the previous during playback. 2 To turn off the 3D Surround to go to the next track. Press . twice or system. 1 Press SOUND MODE to select "3D SUR" Press . playback This unit press PLAY, PAUSE/STEP playback, again. Moving to track 3D Surround WMA 2 To return to (Continued) MODE again effect, press SOUND to select "BYPASS". track. In case of audio CD, the track number directly to any track, enter the numbered buttons (0-9) to go using during playback. CD MP3 WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on menu screen. 2 To repeat all tracks on a disc, press REPEAT a sec- ond time. The Repeat 3 To cancel The icon and "ALL" appears Repeat mode, Repeat Search MP3 1 Press and hold . the menu screen. on the a third time. menu screen. WMA > for about or two seconds during playback. The now will on press REPEAT icon and "OFF" appears CD player go into SEARCH mode. 2 Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3 To return to Repeat To 1 repeat a CD sequence. During disc playback, sen starting point. The Repeat 2 Press A-B The press PLAY. playback, A-B Repeat press REPEAT A-B at your cho- icon and "A* " appears on the menu screen. at your chosen end point. icon and "AB" appears on the menu screen, again and the sequence begins to play repeatedly. 3 To exit the sequence and return to normal A-B again. The 32 Repeat the Audio Channel Press AUDIO repeatedly during playback to hear a (STER., LEFT, or RIGHT). different audio channel Repeat Track/All/Off 1 To Changing icon and "OFF" appears on the play, press menu screen. CD Operation Viewing with JPEG Disc JPEG disc a This DVD/CD/VCR receiver JPEG play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert a can disc and close the The MP3/WMA-JPEG choice TV Moving to another File Press . or > menu appears on the or viewing a picture previous file. to to the Still Picture 1 Press PAUSE/STEP tray. while once advance to the next file during slide show. The DVD/CD/VCR receiver will now go into PAUSE mode. screen. 2 To return to the slide PAUSE/STEP MP3/WMA show, press PLAY or press again. JPEG To 2 menu appears on the TV flip horizontally or Press 1/2 Notes during showing folder, and press ENTER or A list of files in the folder appears. Press RETURN to move to the MP3/WMA-JPEG choice menu. list, " are use " in file list and want to return to the Folder a the 34 buttons on the remote to highlight menu screen. If want to view you 4 highlight a particular file, file and press ENTER the file proceeding starts. a or Viewing During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to the picture a picture press 3/4 to PLAY. Recordings upon the size and number of the JPEG a long time for the DVD/CD/VCR files, it could take receiver to read the disc's contents. If you don't see display after several minutes, some of an on-screen the files are too big --- reduce the resolution of the move pixels Total number of files and folders on and burn anoth- the disc should be less than 650. When you are using software such as Creator" to burn the jpeg files into the that all the selected files have the when to to rotate the Some disc may be incompatible due to different recording format or condition of disc. and press ENTER to return to the previous flip counterclockwise. JPEG files to less than 2 mega er disc. ip If you or JPEG on Depending 3 PLAY. to picture a picture clockwise picture a showing vertically. screen. To rotate Press 3/4 to select picture Press 3/4 while Press 3/4 to select the JPEG then press ENTER. The JPEG the to to the next page. Press MENU to move to the previous page. move copying into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have rename File them ".jpe" or ".jpeg" extensions, please as ".jpg" files. without names be read by the files are ".jpg" extension will not be able to this DVD/CD/VCR receiver. Even shown as JPEG image though files in windows explorer. ip There are three Normal, Slow, Speed viewing Slide Speed options: Fast, highlight the Slide select the option you want to and Off. Press 1/2 to then press 3/4 to use, and press ENTER. 5 To stop viewing The JPEG menu at any other time, press STOP. appears. 33 OPERATION Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 mode to enter during playback or in the Program Edit mode. the mark will appear to the right of the word the right side of the menu screen. on Video CD with setup menu stop to must set PBC to Off PBC, you the use the contain 30 tracks. can Insert Video CD and close the 1 on function. See page 22. Program Program tray. Program VCD E The a Program Press PROGRAM 1 On contain 30 tracks. can with Video CD ote function enables you to store your favourite tracks from any disc in the player memory. Program Program WMA Programmed Playback and MP3/WMA Discs The MP3 E TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 ote TRACK 7 Clear All TRACK 8 Press PROGRAM to exit the E the mark will Select 2 Program Edit disappear. track, then press ENTER a mode; selected track 2 to step 3 Repeat Program the on Program place to place 2 the list. additional tracks on the list. Press PROGRAM while The VCD Program menu playback is stopped. will appear. ote Press RETURN, PROGRAM or PLAY to exit the Program menu. E Program CD TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 2.mp3 TRACK 3 TRACK 10 TRACK 3 TRACK 2.mp3 TRACK 3.mp3 TRACK 4.mp3 TRACK 4 E TRACK 8.mp3 3 TRACK 3.mp3 TRACK 4.mp3 TRACK 5 steps Clear All TRACK 8 STER. 0: 56: 18 Audio CD BYPASS TRACK 7.mp3 00:00 OFF 3 MP3/WMA menu on To from resume track you selected last is highlighted on with left. 5 playing. or To repeat all tracks The 6 Playback begins ENTER to start. a played normal select menu a the program Repeat mode, list, press Track from on the menu screen. press REPEAT icon and "OFF" appears Repeat Erasing on on the Programme a third time. menu screen. List 1 Press PROGRAM once. resume playback, the on second time. icon and "ALL" appears Repeat The in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks on the Program list Tracks icon and "TRACK" appears Repeat To cancel Press PLAY window. screen. REPEAT to the next page. Press MENU to move to the previous page. move display repeat the track currently playing, press REPEAT. The Press 3/4 to select the track you want to start Press TITLE to To in the disappears Repeat Programmed programmed have normal "PROG." indicator menu Press 2. To "Programmed Playback playback 4 programmed playback, press PROGRAM. Clear All TRACK 8.mp3 the program list. 7 2-6 of TRACK 6.mp3 TRACK 7 The Follow Audio CD and MP3/WMA disc" TRACK 5.mp3 TRACK 6 4 Program MP3/WMA TRACK 1 a playback from programmed (or MP3/WMA) list track of CD and then press ENTER or PLAY. "PROG." indicator disappears in the display window. MP3/WMA disc during playback (Audio CD and only) or stop to enter the Programme Edit mode. E The mark will appear. 2 Press 2 to move to the Programme list. 3 Use 3/4 to select the track that you wish to from the Programme list. erase 4 Press CLEAR. The track will be erased from the Erasing 1 Follow List" as the complete Programme steps 1-2 of "Erasing complete Program The programmes 34 a list. List Track from Programme above. 2 Use 3/4 to select "Clear The Program are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD/VCR receiver memorizes the Disc Subtitle R Disc Menu Code Volume Menu 0 dB Size Aspect set- switch off the player. If you load a disc that settings memorized, the latest stop position is automatically recalled. player Small Distance Language user for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the tings Front L Rating Country TV R or has its 1 ft Test Return 5.1 Speaker Setup otes Others -- -- 1 Select "5.1 Speaker Setup" using buttons the 2 While "5.1 on setup the 3/4 is This you switch off the DVD/CD/VCR receiver before mencing to play it. menu. Speaker Setup" Settings player stored in memory for use any time. does not memorize settings of a disc if are com- selected, press 2 button. Press 2 buttons to select the desired 3 4 Adjust options by using Speaker Select speaker. 341 2 buttons. selection speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)) a ers Volume Press 1 / 2 to speaker. (-6dB adjust the output +6dB) level of the selected ~ Size Since the speaker settings settings. the are fixed, you cannot change Distance If you connected speakers to your DVD/CD receiver the Distance lets the speakers know how far the , setting sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press ENTER to test the Adjust signals of each speaker. signals the volume to match the volume of test memorized in the system. Front Left (L) → Centre Right (R) → Rear → Rear Left Front (L) Right (R) → → Subwoofer Return Press ENTER to return to the previous menu. 35 OPERATION Additional On Screen Operation VCR part - Display You may easily display the clock or tape counter and tape remaining, day, month, year, day of week, programme channel, tape speed and VCR function on the TV If a (Video Doctor) This feature informs you that there is a problem with your DVD/CD/VCR receiver. These error messages will appear on the TV screen. screen. recording is these On Screen taking place will not be recorded onto the Press CLK/CNT to 1 User Guide Friendly Displays tape. 1 Press i. Press F or G to select Dr. and press OK. display. VCR VIDEO DOCTOR Dr. HEAD STATUS VCR Function/ STOP SP Tape Speed Programme PR-01 STEREO TAPE STATUS NO. OF TIMER PROGRAMME Channel STEREO NEXT TIMER PROGRAMME OK i Day/Month/ Year/Day of 1. 01. 03 WED Clock/Tape Counter & 12:00 Tape remaining Week 2 Press CLK/CNT repeatedly to display the 2 tape or E to check a problem. HEAD STATUS counter. During playback or recording, the tape remaining displayed with the tape counter. Press D O PLEASE CLEAN: is Clean your video heads. TAPE STATUS 3 After 3 seconds the display will clear from the TV screen, leaving only the clock or tape counter and tape remaining on the TV screen. Press CLK/CNT again to remove all displays from the TV O NOT RECORDABLE: Insert NO. OF TIMER PROGRAMME O screen. The tape remaining will only be accurate for tapes. The tape remaining indicator may not be accurate, since it depends on the type or condition of tape used. Also, the tape remaining indicator is E-180 and E-240 after not displayed just or after playback ed, a or Counter Digital Tape screen instead of the time recording has begun. Counter indicates the relative of the 2 displayed on (H) recording. display the actual play 3 complete. 4 playback time in recording is tape will rewind and automatically stop when the counter returns to 0:00:00. Please note: If FORWARD is counter mode indicates will not 36 stop. a the menus from the TV During play back, press point where repeat play pressed when negative value, the tape the & hold REPEAT at he is to be concluded. Then, your DVD/CD/VCR receiver will go into 2 search. Release REPEAT at the point where repeat play is to start. Holding section is replayed twice automatically. ote or Press BACKWARD. The remove (easy) Repeat reverse tape counter will hours, minutes and seconds. Press STOP when Press i to screen. pressing & holding REPEAT during play back, holding section is replayed twice automatically. screen. to start The recording. BY until the counter is Press CLEAR to set the counter to 0:00:00. Press PLAY 3 1 repeatedly the TV Shows the current status of timer positions tape. Press CLK/CNT recording. NEXT TIMER PROGRAMME be The 1 the number of timer O PR-01 26 10:00~11:00SP ez displayed on your TV by pressing CLK/CNT on the can remote control. Digital Tape recordings on 2Shows cassette has been insert- Tape Counter Memory Stop The tape with its protection tab in place a Pressing REPEAT again during repeat play, DVD/CD/VCR receiver will return to normal the play. Additional Operation Hi-Fi Stereo Sound VCR part - System Your DVD/CD/VCR receiver will record and play back Hi-Fi stereo sound. In addition it has a NICAM digital stereo sound decoder. This allows you to record and play back the sound in several different ways. Video cassettes recorded on your DVD/CD/VCR receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo cast, stereo audio system, video disc or another Hi-Fi VCR. 1 Your DVD/CD/VCR receiver's NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo and The recorded will be for couple a briefly displayed on or and mono recorded tracks of the video on screen The tape. on primary language the mono on mono on track of the video STEREO, LEFT (left channel), output is primary language Please note that when the Hi-Fi channel track of the video (left) set to STEREO. will be output from both tape. setting is MONO. adjusting the tracking control Hi-Fi stereo sound may revert to MONO. will MONO The sound is recorded until the desired audio channels when the audio Both audio channels will be recorded be recorded TV broad- mode appears. nel when audio the Hi-Fi stereo BIL NICAM stereo tracks. The a (right channel) and MONO. playback the primary language is output on the left channel and the secondary language is output simultaneously from the right chan- of seconds: automatically repeatedly mode from In BIL NICAM STEREO Sound is bilingual RIGHT that the TV Press AUDIO The choice is sound. NICAM, bilingual particular type of sound received mono 2 or 3 Press i to return to a TV picture. the Hi-Fi tracks and the tape without any separation. STEREO ote If the quality of stereo sound being received is poor, the broadcast is automatically received in monaural with better quality. Still, if the quality of the sound is poor, set NIC in the main menu to OFF (see p. 16). NICAM broadcasts will be detected. 37 OPERATION Special Recording Copying from DVD To VCR Recording This unit allows you to copy the contents of VHS a DVD to a recorder tape. With the DVD/CD/VCR receiver you can make recordings from an external source, such as copying from ote If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted another VCR to copy Macrovision encoded DVDs. "LOCK" will blink the on 1 2 window. display Insert the disc you wish to copy in the DVD deck and close the disc tray. Insert a Tape. blank VHS video Press PLAY (H) on The DVD will go into If the DVD disc the PLAY used 1 following description, this DVD/CD/VCR receiver one used for recording and other VCR will be for playback. VCR should be connected to the SCART sockets the DVD deck. mode appears, you may need to press (H) manually to 4 5 Stop and or again. the unit may the Press AV until the socket you wish to record from is displayed. on recording using the lower the back of your DVD/CD/ EURO AV2 socket replay on recording using the upper the back of your DVD/CD/ VCR receiver. AV 3 Sound and Picture on and record recording from AV3 sockets the front of your DVD/CD/VCR receiver. Insert the recorded 3 tape tape into VCR and a blank into DVD/CD/VCR receiver. 4 To start recording, press REC/ITR (z) on DVD/CD/VCR receiver and press PLAY on VCR. 5 When you want to finish copying, press the STOP (x) on both appliances. Press STOP (x) twice within 5 seconds at DVD/CD/VCR receiver. 38 on AV2 Sound and Picture Process. ends, over of the panel VCR receiver. playing, press STOP (x) twice within 5 seconds to end the copy. You must stop the Copy process manually when the DVD movie panel or one of your the AV3 sockets rear of your DVD/CD/VCR receiver. EURO AV1 socket . When the DVD is finished over the AV1 Sound and Picture (z) press COPY/MEMORY The VCR receiver will go into Record mode. Copy 2 begin copying. or on DVD/CD/VCR receiver tape into the VCR deck. play menu Press REC/ITR the camcorder. will be Insert Disc. Insert VHS or a ote In the front 3 from another video Radio Operation the Radio Stations Presetting You can ing, make 1 to the Radio Listening 30 stations for FM and AM. Before tun- Preset radio stations in the DVD/CD/VCR receiver that you have turned down the volume. memory first preset sure Press FM/AM on the remote control front until the the and TV panel display frequency or on the band appears on 1 screen. (see "Presetting Press FM/AM on the remote control front until the the and TV panel display radio stations" frequency on the or on left). the band appears on screen. The last received station is tuned in. 2 RADIO AM on preset station you 01 522kHZ Press 3/4 to by rotating VOLUME on the by pressing VOLUME + or on control repeatedly. or the remote the remote control to select your on repeatedly want. the volume 3 Adjustpanel front 2 the remote control Each time you press the button, the DVD+Hi-Fi VCR tunes in one preset station at a time. OK, CLEAR , Press 3/4 select the - desired radio channel. To Clear the Stored Radio Stations RADIO FM , 3 4 OK, CLEAR Press FM/AM front on the remote control or on Press FM/AM on 4 TUNING hold down 1 and 2 until the the and TV panel display 2 frequency or on the band appears on screen. the 3 on on the front panel RADIO or FM seconds, and a 06 108. 00MHZ the remote control for 1 , or the remote control front to select the desired band. panel Hold down 1 06 108. 00MHZ OK, CLEAR station is searched for automatically. 2 RADIO FM Press 3/4 on the remote control to select your desired station. 06 87. 50MHZ , OK, CLEAR RADIO AM 5 Press MEMORY on the remote control COPY/MEMORY on the front , or OK, CLEAR press panel. 3 6 Repeat steps 10 522kHZ Press CLEAR the remote control to clear the stored radio station. 2 to 5 to store other stations. RADIO FM 10 87. 50MHZ , OK, CLEAR ote While record or record pause function may not be mode, the CLEAR operated. 39 OPERATION with Radio Operation into Tuning 1 2 3 a Press FM/AM Station on until the the and TV Press FM/AM front panel Press 1 4 on Mute Manually the remote control front panel display (Continued) frequency or on band appears the remote control or on the to select the desired band. on into 3 on the front panel or press the remote control to tune in the a Station Hold down 4 TUNING 3 down 1 and 2 seconds, and a on on Automatically the front panel the remote control for 1 station is searched for or hold or 2 automatically. ote The search may not weak signal. 40 on stop at a the the desired station. Tuning You screen. TUNING and 2 Press MUTE to mute your unit. can mute your unit in order, for the station with a very telephone, display. example, to answer MUTING and MUTE indicator appear in Language Code Enter the (See appropriate 21). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu REF NC 41 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 23). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor Coast IN India NU Niue IO British Indian Ocean NZ New Zealand US United States Uruguay Kingdom Outlying CI Ivory CK Cook Islands CL Chile Territory OM Oman UY CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Verde Anguilla Islands Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands 42 Republic Islands (French) State (British) (USA) Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD/CD/VCR No disc is inserted. Insert No disc Plug the power securely. tape is inserted. picture. disc or tape. (Check that the tape indicator in the display The TV is not set to receive Select the DVD/CD/VCR receiver on signal output. cord into the wall outlet a or window is receiver does not work. No service. the TV lit.) appropriate video input the picture from the DVD/CD/VCR receiver appears TV TV/VCR mode for DVD/CD/VCR receiverissettoTV. on the screen. Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the window. display The video cable is not connected mode so Connect the video cable securely. securely. No sound. The connected TV power is turned off. Turn The audio cable is not set to receive Select the correct input mode on the audio receiver so you can listen to the DVD/CD/VCR receiver sound from the DVD/CD/VCR receiver. connected with the equipment The audio cables are signal output. not connected the TV. on Connect the audio cables securely. securely. The power of the equipment connected with the audio cables is turned off. The digital audio output position. is set to the wrong The playback picture is poor. The disc is Tape heads Tape is a receiver does not start playback. Set the digital audio output to the position, then turn on the DVD/CD/VCR receiver again by pressing POWER. recorded or was Use PR/TRK (v/V) for manual tracking while tape is playing. on adjustment No disc is inserted. Insert No disc tape is inserted. disc or tape. (Check that the tape indicator in the display a or window is An connected with Clean video heads. another VCR. The DVD/CD/VCR equipment Clean the disc. dirty. rental the on the audio cables. correct dirty. are Turn unplayable Insert disc is inserted. lit.) playable a disc. (Check the disc type, color system, and Regional code.) The disc is placed upside The disc is not within the placed Place the disc with the down. guide. Place the disc inside the dirty. The level is set. The remote control is not The remote control does not work properly. sensor pointed at the of the DVD/CD/VCR receiver. The remote control is too far from the DVD/CD/VCR receiver. There is an tray correctly guide. Cancel the the remote the disc side down. Clean the disc. The disc is Rating on playback obstacle in the path of the remote rating Rating function or change level. Point the remote control at the remote sensor of the DVD/CD/VCR receiver. Operate (7 m). the remote control within 23 ft Remove the obstacle. control and the DVD/CD/VCR receiver. The batteries in the remote control are Replace the batteries with new ones. exhausted. This remote control uses the same When using a VCR, first press the VCR a DVD, first press buttons for VCR and DVD functions button. When (ex. PLAY). the CD/DVD button. using 43 REF NC Troubleshooting (Continued) Cause Symptom Correction The DVD/CD/VCR receiver is in the Press PAUSE/STEP during recording. RECORD PAUSE MODE. recording. The The The or tape does tape will not run not rewind Check the or playback picture If Set the TV to the Video channel the RF cable for you're using only connection. 15). Noise appears visual search. This is normal. Turn camcorder during The automatic Breaks The automatic noticeable in Hi-Fi soundtrack. operate tracking mode is Try manual tracking (see p. 24). tracking mode is Try manual tracking (see p. 24). engaged. There is cannot be no tape loaded, or loaded has had its record Tape-to-tape editing not possible. recording and p. engaged. started. Timer on (see properly. Noise appears during normal playback. Recording resume tape. does not appear while the tape is running. are to fast-forwarded. fast-forward. The tape is already fully rewound (X) is won't work. the tape Insert a tab cover the hole where the tab safety tape, or using adhesive removed. removed. The Confirm that the camcorder is source (another VCR, camcorder) properly connected. has not been connected. The clock/or the timer have been set Re-perform tings. incorrectly. The timer is not tape, was properly the clock and/or timer set- Press POWER and confirm that the engaged. timer indicator is displayed on the Display. DVD/CD/VCR receiver's The loaded safety tape has had its record tab removed. a a pate with adhesive tape, or tape with the record safety tab intact. Audio mode is not set No Hi-Fi sound. Insert insert Select "STEREO" properly. AUDIO on by repeatedly pressing the remote control. Moisture Condensation Moisture condensation ? cold ? place Under to a warm extremely In locations where moisture condensation may can occur: When the DVD/CD/VCR receiver is moved from a ? outlet with POWER On. This will place. humid conditions. Keep the DVD/CD/VCR receiver ? When condensation has plugged help prevent occurred, wait for the DVD/CD/VCR receiver to 44 into dry occur: AC power condensation. an a few hours before using it. Specifications General Power AC 110/230V~ 50/60 Hz Power 130 W Timer 430X90X350mm(wxhxd) 8 kg (17.6 lbs) 5˚C to 40˚C (41˚F to 104˚F) 24-hour display type Operating humidity 5%to90% requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature , REF NC DVD Section Laser Semiconductor Signal system Frequency response PAL/NTSC laser, wavelength 650 nm DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto20kHz CD:8Hzto20kHz Signal-to-noise ratio More than 70 dB Harmonic distortion Less than 1.0% Dynamic More than 60 dB range More than 60 dB (analog out connectors only) (DVD) (CD) Outputs S-VIDEO OUT (Y) (C) 1.0 V 0.3 V (p-p), 75 ohms, negative (p-p) 75 ohms sync, Mini DIN 4-pin x 1 VCR Section Head 4 heads helical system Television system Recording format scan PAL/SECAM colour azimuth PAL/MESECAM RF OUT G RF Modulator UHF 22-68 Tape speed PAL/MESECAM; (Adjustable) 23.39 mm/s recording time Rewind time Input level Output level Signal-to-noise ratio VIDEO: More than 43 dB More than 42 dB range (SP), 35.35 mm/s AUDIO: More than 72 dB Dynamic 16.69 mm/s (LP) (Playback only); (SP), 16.67 mm/s (LP), 11.12 mm/s (EP) SP: 4 h (E-240 tape), LP: 8 h (E-240 tape) About 180 min (E-180 tape) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced AUDIO: -6.0 dBm, more than 10 kohms (SCART) -6.0 dBm, more than 47 kohms (RCA) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced NTSC Maximum system system (Hi-Fi) (Mono) AUDIO: More than 85 dB Tuner Section Tuning FM: 87.5 range - 108.0 MHz AM:522-1611kHzor530-1610kHz Intermediate frequency FM: 10.7 MHz AM: 450 kHz Amplifier Section Stereo mode Surround mode 20W+20W(4ohmat1kHz,THD10%) Front: 20W + 20W (THD 10%) Centre: 20W Surround: 20W + Subwoofer: 40W 20W (8 (4 ohm at 1 ohm at 30 Hz, kHz, THD 10%) THD 10%) 45 Specifications (Continued) Speaker Section Satellite (LHS-C6231T) Type Impedance Frequency Response 1 Way 1 Speaker 4Ω 130 20,000 Hz - Sound Pressure Level 83 dB/W Rated 20W Input Power Max Input Power Net Dimensions (W Net Weight (1m) 40W H x x 88x100x95mm D) 0.54 kg Passive Subwoofer (LHS-C6231W) Type Impedance Frequency Response 50 Sound Pressure Level 82 dB/W Rated 40W Input Power Max Input Power Net Dimensions (W Net Weight 1 Way 1 Speaker 8Ω 1,500 Hz - (1m) 80W x H x 160x350x325mm D) 4.12 kg Accessories: RF 75-ohm Coaxial Cable Remote control Design and x x 1, Speaker cable 1, Batteries (AAA) x 2 specifications are Manufactured under license from subject Dolby to x 5, RCA-SCART cable change Laboratories. 46 Digital Out" are trademarks of Digital 1, AM loop antenna x 1, FM antenna x without notice. "Dolby", "Pro Logic" Laboratories. "DTS" and "DTS x Theater Systems, Inc. and the double-D symbol are trademarks of Dolby 1, NOTE 47 P/N: 3828R-D036E
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement