LG | LH-D6246A | LG LH-D6246A Owner’s Manual

LH-D6246A JAASLLS
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6246
(Main Unit: LH-D6246A,
Speakers: LHS-D6246T, LHS-D6246W)
CD-R/RW
Before
please
up, operating or repairing this
read this instruction booklet carefully and
connecting
product,
completely.
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
and maintenance
important operating
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
Laser
System.
product, please
OTES ON COPYRIGHTS:
read this
owner 's
manual
unit
tion
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
apparatus should
splashing) and no
should be placed on
or
not be
exposed to water
objects filled with liquids, such
the
apparatus.
It is forbidden
via cable,
law to copy, broadcast, show, broadcast
in public, or rent copyrighted material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
to others. You should
retain this
Model No.
Serial No.
2
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Table of Contents
Audio CD and MP3/WMA Disc
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
Operation
PlayingAudioCDsorMP3/WMADiscs
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
22-23
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.22
Pause.............................23
Precautions.............................5
SelectingTracks.....................23
RepeatTrack/All/Off...................23
NotesonDiscs..........................5
Search.............................23
PlayableDiscs...........................4
AboutSymbols..........................5
Front Panel Controls and Display Window
Indicators.................................6
RemoteControlOverview....................7
RearPanelConnections.....................8
RepeatA-B.........................23
3DSurround........................23
AudioChannelSelection...............23
JPEGFileOperation.......................24
ViewingJPEGFiles......................24
SelectingFiles.......................24
StillPicture.........................24
Preparation
Connections............................9-13
FlippingthePicture...................24
RotatingthePicture...................24
AM-FMAerialConnections..................9
NotesonJPEGFiles..................24
TVConnection..........................10
ProgrammedPlayback.....................25
Audio CD and MP3/WMA Disc Programmed
Playback..............................25
.25
VideoCDProgrammedPlayback.
SpeakerSetup............................26
.11
ExternalEquipmentConnection.
.12
SpeakerSystemConnections.
SpeakerPlacement......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mode.................................14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
InitialSetup.........................16
Language..........................16
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
SystemSelect..........................26
RadioOperation........................27-28
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Dimmer...............................28
Picture.............................16
Mute.................................28
SpeakerSetup.......................17
UsingHeadphoneJack...................28
Others.............................17
ParentalControl......................18
Operation
.19-21
DVDandVideoCDOperation
DVDandVideoCDPlayback...............19
.
.
.
.
.
.
.
.
.
.
.
.
Reference
LanguageCodeList.......................29
CountryCodeList.........................30
Troubleshooting........................31-32
Specification.............................33
GeneralFeatures........................19
TITLESelection......................19
CHAPTER/TRACKSelection.
.
.
.
.
.
.
.
.
.
.
.19
Search.............................19
Still Picture and
Frame-by-Frame Playback
.
20
About the
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
harm to the unit
SlowMotion.........................20
Repeat............................20
RepeatA-B.........................20
TimeSearch........................20
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
AudioLanguageSelection..............21
AudioChannelSelection...............21
Subtitles...........................21
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential
Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
DVD
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In addition, this unit can play a DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R or CD-RW that contains
or
JPEG files.
Depending
--
the conditions of the
the CD-R/RW
ment
or
itself,
some
cannot be
--
on
CD-R/RW
played
on
recording equip(or DVD±R, DVD±RW) disc
(or DVD±R, DVD±RW) discs
irregularly shaped
octagonal). It may result in
or
use
otes
on
feature content
enabling
easily.
(Video
Sections of
audio
or an
enabling
CD and audio CD
only)
a picture or a musical piece
CD. Each track is assigned
on a
a
video CD
track number,
you to locate the track you want.
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
accompanying
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
otes
--
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
audio titles, MP3, WMA
(DVD only)
CDs
Scene
(the
On
(e.g., heart-shaped
malfunctions.
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Make sure to also refer to the instructions
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
There
played
on
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
functions, or other
typical computer-like operations. Moreover, still pictures
of
the
are
Video CDs
PBC
or
of video CDs
Types
high
system via
resolution
Video CDs not
Regional
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
tured for
playback of
software. The region
designed and manufacregion "2" encoded DVD
code
DVDs indicates which
those discs. This unit
on
the labels of
type of player
can
only play
can
some
2
play
DVDs labeled "2"
or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
4
can
be
played
if
they
are
included in
the disc.
unit.
subject
menus, search
to
area
restrictions and therefore not
playable.
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
To
use
volatile
such
liquids,
as
the unit. Do not leave rubber
near
radio,
or
turn off the
contact with the unit for
leave marks
Cleaning
a
use a
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
temperature
as
a
clean
Before
quality.
cloth. Wipe
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
on
a
insecticide spray,
plastic products in
long period of time. They will
or
NO
the unit
Do not
soft, dry cloth. If the surfaces
soft cloth
or
use
thinner,
are
moistened with
lightly
solution. Do not
benzene,
YES
the surface.
To clean the cabinet
Use
playing,
the exterior surfaces clean
keep
Do not
or
discs
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
use
spray intended for
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD receiver is
a
high-tech, precision
device. If
the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
get
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
on
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
of the
DVD.
Video CDs with the PBC
(playback control)
function.
Handling
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG files
on a
disc.
5
INTRODUC
Front Panel Control and
Window Indicators
Display
STANDBY/ON
OPEN/CLOSE
VOLUME
controller
STANDBY indicator
FUNCTION/
Lights red when the receiver
is in Standby mode (off).
PLAY
DISPLAY
Window
DISC
Remote
Tray
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING
(DOWN/UP)/
SKIP/SCAN
Indicates current
Indicates current
surround mode
or
PHONES
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
player function:
Playback, Pause,
MEMORY
indicator
mode indicators
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
DVD DVD disc loaded
VCD Video CD loaded
SVCD
Super
Video CD loaded
MP3 MP3 disc loaded
6
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control Overview
POWER
OPEN/CLOSE
(p. 19)
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
the front
on
panel.
Press and hold down this button
about 3
seconds, then press
repeatedly
NUMBER
SLEEP
to select other function.
(p. 28)
SUBTITLE
PRO LOGIC II
(p. 14)
AUDIO
(p. 14)
(p. 14)
(p. 16)
SOUND
SETUP
(p. 21)
RETURN
(p. 19)
DISPLAY
(p. 15)
ENTER
TITLE
ARROW
For
on a
use
GUI
in
highlighting
menu
a
Use the MENU button to
menu screen
display
screen, TITLE and
MENU
the
Use the TITLE button to
selection
MENU
included
(p. 21)
on
screen.
the title
included
DVD video discs.
SLOW SCAN
(p. 21)
display
screen
(Q
/
R)
(p. 20)
DVD
on
video discs.
VOLUME
(+/-)
PRESET(+/-) (p. 27)
SKIP/SCAN
STOP
PAUSE/STEP
(p. 20)
MUTE
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
Remote Control
DIMMER
Remote control
sensor
and press
Angle:
battery
(p. 28)
installation
Remove the
the buttons.
remote
(p. 28)
(p. 25)
CLEAR (p. 21)
REPEAT (p. 20, 23)
REPEAT A-B (p. 20, 23)
Operation Range
Distance: About 23 ft
) (p. 19)
/
PROGRAM
21)
21)
21)
21)
Point the remote control at the remote
(
battery
cover on
the
rear
of the remote control, and insert two
(7 m)
from the front of the
R03
(size AAA) batteries
aligned correctly.
sensor
with
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel Connections
SPEAKER Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
S-VIDEO OUT
Connector
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
MONITOR OUT
Connector
AM Antenna Connectors
POWER CORD
COMPONENTVIDEO OUT /
PROGRESSIVE SCAN
(Y
Pb
Terminals
ConnecttoaTVwithYPbPr
inputs.
Do not touch the inner
panel. Electrostatic
damage to the unit.
8
pins of the jacks on the rear
discharge may cause permanent
Pr)
Connections
AM-FM Aerial Connections
Connect the
Connect
supplied FM/AM aerial for listening to the radio.
the AM loop aerial to the AM aerial connector.
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
PREATION
(supplied)
(supplied)
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
otes
To
prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be
sure
After
fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
to
as
horizontal
as
possible.
9
Connections
(Continued)
TV Connections
Make
of the
following connections, depending
capabilities of your existing equipment.
the
one
ips
Depending
on
Progressive
described below.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
connection
a
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN
jacks from the DVD/CD player to the
ding in jacks on the TV using an optional Y
(C).
corresponPb Pr cable
directly
your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
pro)
high-definition or "digital ready"
television, you may take advantage of the DVD/CD
receiver's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD receiver.
your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use one of the connections
best connections.
(ColorStream
If your television is
on
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
Scan
on
ote
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 16.
menu
protection system.
Rear of TV
Video connection
Connect the MONITOR OUT
receiver to the video in
cable
jack
jack
INPUT
from the DVD/CD
the TV
on
VIDEO
INPUT
S-VIDEO
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
using
the video
Y
Pb
Pr
L
supplied (V).
S-Video connection
V
Connect the S-VIDEO OUT
er
to the S-Video in
cable
jack
on
jack
on
the TV
the DVD/CD receiv-
using
S
the S-Video
C
(S).
ip
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
Component
Video
(Color Stream )
connection
COMPONENT
VIDEO OUT
Connect the COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks from
sponding in jacks
the DVD/CD receiver to the
on
the TV
using
an
S/V
UT
MO
ROUT
corre-
Y Pb Pr cable
(C).
PROGRESSIVE
SCAN
Rear of DVD/CD
player
VIDEO Cable
T
Back of the DVD/CD receiver
SCART-RCA
Adaptor
TV/MONITOR
10
(SCART type)
for
Connections
External
(Continued)
Equipment Connections
Rear of VCR
(or
LD
player, etc)
L
PREATION
VIDEO
OUTPUT
AUDIO OUTPUT
R
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Connection
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
LH-D6246A JAASLLS
Connections
(Continued)
Speaker System
Connections
Connect the
the
speakers using
To obtain the best
possible
Front
speaker
(Right)
supplied speaker
surround sound,
Center
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Rear
speaker
(Right surround)
Rear
speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not remove the front cover of supplied speaker.
12
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
Speaker
In the
Placement
of normal
case
(Continued)
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
Front
speakers
According to your listening position
speakers to 45 degree.
set up the
for
speakers
equal
distance. And
by hearing position
set up the interval between
Centre
The
?
play
speaker
centre speakers
and front
speakers
are
ideally
the
same
height.
But
normally place
it above
or
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener's
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
right speakers and subwoofer. Standard two channel (stereo) sources completely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
identical to the
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital program
"
If you play DVDs with
better sound quality, greater
source.
enjoy even
improved dynamic
mark, you
spatial
can
You
"
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
A) By pressing
SOUND button
Each time you press SOUND button, the sound mode is
changed in the following order;
PRO LOGIC
PLII MATRIX
NO
→
PLII MOVIE
→
ROCK
→
CLASSIC
→
→
SOFT
→
POP
→
PLII MUSIC
→
LIVE
→
→
DANCE
3D SURROUND
→
→
TECH-
BYPASS
...
accuracy, and
ips
ROCK:
playing
"
which carries the
"
Sound Mode
range.
Use this mode when
(2CH STEREO)
the sound from the front left and
Outputs
Surround mode
means
BYPASS
movie
or
Dolby Digital
mark. This mode
provides
Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
2 channel
the effect
of
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
music.
CLASSIC:
the acoustics of orchestral
Reproduces
music.
SOFT: Ideal for soft acoustic sounds.
ic than before.
B) By pressing
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
provides
a
Each time you press
PL II button, the sound mode
is changed in the following order;
PRO LOGIC
→
PLII MATRIX
(This
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
function available 2-channel mode
only)
When DVD is inserted.
MOVIE mode:
and
PL II button
with any stereo music recordings,
wide and deep sound space. The Music mode
use
You
change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button on the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
can
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
includes controls that allow the sound to be tailored to individual
listening
→→→
tastes.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except
that the
directional enhancement
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
audio to
mono.
3D SURROUND
This unit
?
The DVD/CD Receiver memorizes the last mode
settings
?
for each
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
source
-
-
-
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
can
audio from
a
encoded with
14
For your reference
home theatre. This feature works with DVD discs
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not
applicable
when
headphone
is used.
Before
General
This manual
Operation (Continued)
Explanation
3
operating the
DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
General
screen.
playback
1
2
is not available
on
status
Playback
can
be
be
Repeat
Track
ALL
Repeat
All Tracks
Repeat
A-B
Repeat
Off
OFF
display operation
Press DISPLAY
Resume
during playback.
Press 3/4 to select
an
The selected item will be
Action
item.
For
some
setting
functions,
setting.
Title
TRACK
AB
an
Displays
Repeat Chapter
menu.
of
be also be used for
number).
CHAPT
the TV
on
title
Status
Repeat
TITLE
the disc.
displayed
changed on the
can
(e.g.,
can
setting
press ENTER to execute the
Display
Some items
On-screen
or
numbers
the
change
The number buttons
basic instructions for
the DVD/CD receiver
On-Screen
Press 1/2 to
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
item.
otes
highlighted.
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
and Digital Audio
Output mode
Subtitle
language
Angle
5.1 CH
ABC
OFF
1/1
Sound
VCD2.0
D
BYPASS
titles,
and
skips
to the desired title number.
Shows the current
chapters,
and
number and total number of
chapter
skips
to the desired
chapter
Shows the
searches
elapsed playing time, and
the point directly from the elapsed
number.
time.
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
the
angle number and total
changes the angle number.
mode,
number of
and
setting.
Numbers, ENTER
1/2,or
AUDIO
1/2,or
ANGLE
1/2,or
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track
1/4
Time
0:20:09
Audio Channel
and PBC On
Shows the
mode,
BYPASS
changes
and
number, total number of tracks
skips to the desired track number.
elapsed playing
Shows the audio
STER.
Sound
1/2,or
Numbers, ENTER, SKIP
SUBTILE
Shows the current sound
changes
1/2,or
Numbers, ENTER
1/2,or
setting.
Shows the current
angles,
and
Selection Method
channel,
the
setting.
1
/2,or
Numbers, ENTER
(Display only)
and
--
1
the audio channel.
Shows the current sound
changes
time
Selection Method
/2,or
AUDIO
mode,
and
1
/2,or
SOUND
15
PREATION
LH-D6246A JAASLLS
Before
Initial
You
Operation (Continued)
Setup
set your
can
DVD/CD
Picture
Personal Preferences
own
on
the
player.
TV
Aspect
4:3 Letterbox: Select when
nected.
Initial
DVD
and
Setup
Operation Overview
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
with
masking
con-
bars
The
connected. The video material formatted in the Pan &
1
Press SETUP.
4:3 Panscan: Select when
Setup
menu
appears.
Scan
style
picture are
is
played
cut off).
English
Disc Menu
Spanish
Rating
German
Disc Audio
4:3
Letterbox
Italian
Disc Subtitle
4:3
Panscan
Portugues
Disc Menu
16:9 Wide
Code
Aspect
Greek
Language
Progressive
French
Scan
5.1
Country
TV
Other--------
Speaker Setup
screen
will show the
option,
option.
current setting
menu
as
well
as
5.1
for the
option
menu
is
selected,
press 2, then
3/4 to select the desired
Press ENTER to confirm your selection.
Some menu
additional steps.
PLAY to
or
move
the
menu.
Language
Language
DVD
language
a
Others
Progressive
for the disc's Menu, Audio, and
original language set for the disc is selected.
Other : To select another language, use the number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
:
The
Disc Menu
Spanish
Rating
German
Code
Country
TV
Language
Scan
Speaker Setup
you
see
French
Caution
Once the
Other--------
Setup
menu.
English
Disc Subtitle
Spanish
Disc Menu
German
Rating
Italian
Code
Aspect
Menu
16
for the
Disc Audio
TV
Speaker Setup
Greek
when you press SETUP.
Country
Scan
Italian
Language
language
Language
Others
Others
a
Code
Aspect
Menu
5.1
Chinese
Select
On
Portugues
Aspect
Progressive
Menu
Disc Subtitle
Rating
English
Disc Subtitle
5.1
Off
Original
Disc Audio
Menu
DVD
Disc Audio
Progressive
Country
16:9 wide TV is connected.
Disc Menu
code, press CLEAR.
TV
Scan
a
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD/CD player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Subtitle.
Original
Speaker Setup
16:9 Wide: Select when
3
setting.
4
option require
SETUP, RETURN,
5 Setup
Press
Scan
alternate
setting(s).
Select
Language
Progressive
menu
While the
Code
Aspect
Menu
Others
Use 3/4 to select the
sides of the
Rating
Chinese
Disc
style (Both
Disc Subtitle
Menu
selected
back in that
Original
TV
The
conventional TV set is
Disc Audio
Country
2
a
Language
Portugues
Greek
This is the
menu
setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
You
Play
DVD
set up the DVD/CD receiver so a DVD disc
automatically starts playing whenever the DVD is insert-
DVD
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
can
ed.
If Auto
mode is set to On, this DVD/CD receiver
will search a title that playback time is longest and then
Play
back the title
play
On: Auto
Off: Auto
Play
Play
automatically.
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
ote
Front L
Rating
Country
TV
Code
Volume
Scan
Progressive
Play
function may not work for
some
DVDs.
Small
Distance
Language
The Auto
0dB
Size
Aspect
Menu
R
0.3m
Test
Return
5.1
Speaker Setup
Others
Others
The DRC, Vocal, PBC and Auto
Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
Language
Progressive
5.1
Play
Scan
Speaker Setup
Others
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
audio
digital
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
and the
listen to
at
of sound. Set
a
quietest ones). Then, you may
lower volume without losing clarity
a
movie
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Country
Rating
Enter the code of
Movies
DVD
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
to the
applies
complete
the disc. These
scenes on
disc
or
scenes are
Code
Disc Audio
rated
are
Rating
TV
Disc Menu
6
Progressive
5
Rating
1
4
Code
3
Aspect
1
Scan
Unlock
Speaker Setup
Select
the
Scan
Speaker Setup
Others
using
Country
2
step
3
4
5
6 selection,
Code is
1
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
"Rating"
Shift the
is
selected, press
2.
3 of
"Rating"
personal 4-digit security password. then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passto create
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Ratings
1 to 8: Some discs contain
scenes
played. Higher rated scenes
unless
an
alternative
scene
is available
The alternative must have the
lower
If
will not be
same
on
rating
5
ote
This function may not work for
18
some
DVDs.
button and select the
3/4 buttons.
Confirmation of the
the code is
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
below.).
Changing
the
4-digit
code
1
Follow
2
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
3
Steps
1-2
as
shown above to the left
(Rating).
ENTER.
4
Enter the
5
Enter
exactly the same
fy by pressing ENTER.
6
Press SETUP to exit the
new
then press ENTER.
code a second time and veri-
4-digit code,
menu.
If you
4-digit
your
code
or a
1
Press SETUP to
2
Use the Number buttons to enter the
selection,
If you
forget
the disc.
played
no
Press ENTER to confirm your rating
then press SETUP to exit the menu.
the 3/4 buttons.
your password, to clear the current password, follow the procedure below.
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
using
not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
left.
ote
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
cursor
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
a
word, then press ENTER.
Select
using 2
character using
second
on
selected, press 2.
Select the first character
Select
the 3/4 buttons
menu.
Follow
Change
Code
Country
setup
While
2
Language
Progressive
5.1
Language
Others
7
Menu
Aspect
Menu
8
Disc Subtitle
TV
Code
Country
5.1
Country
ZA
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
Code Set
Disc Subtitle
The Parental Control feature allows
country-dependent.
whose standards
country/area
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 30).
to
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
DVD
forget
display
the
setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
(Rating).
code
is cleared.
as
shown above to the left
DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
Operation
General Features
Playback
DVD
VCD2.0
the TV and select the video
VCD1.1
input
ote
source con-
nected to the DVD/CD receiver.
Audio
the
1
2
3
system:
input
Turn
source
on
the audio
system
available
and select
Load your chosen disc in the
playback side facing down.
READING appears
automatically.
is
disc has
another title
tray.
the TV screen, and playback
If playback does not start,
might
menu
a
title, you
one
to
can move
follows:
Press 1 2 to select
When
displayed
may be displayed first after
Video CD which offers a menu.
than
a
title, then press ENTER.
CHAPTER/TRACK Selection
appear
menu screen
as
more
Press DISPLAY, then press the appropriate number
button (0-9) to select a title number.
DVD
a menu screen
or
DVD
When
instead.
DVD
TITLE Selection
1/3
on
press PLAY.
In some cases, the disc
The
menu.
tray.
tray, with the
Press OPEN/CLOSE to close the
If
the
Setup
on
use
connected to the DVD/CD receiver.
Press OPEN/CLOSE to open the disc
starts
Unless stated otherwise, all operations described
the remote control. Some features may also be
loading
a
VCD1.1
a
disc has
title
on a
more
chapter/track
1/3
1 /12
disc has
than
one
than
more
track, you
one
chapter
can move
or a
to another
follows:
as
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
to
title/chapter you
start playback.
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
2
menu
using
the numbered buttons
to select the
setup. See page
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
For
two-digit numbers, press
(0-9)in rapid succession.
Search
If Parental Control is set and the disc is not within the
(see
page 18).
region code.
play
DVD
VCD2.0
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
or
> for about
during playback.
The receiver will
now
go into SEARCH mode.
or
>
repeatedly
to select the
discs that have
code different from your receiver. The
this receiver is 2 (two).
or
the numbered buttons
2 Press and hold SKIP/SCAN .
on
Your receiver will not
chapter/track,
press 1
then press ENTER.
(0-9)
ote
menu screen.
otes
--
number
operating procedures for
depending on the disc.
You also may set PBC to Off under
17.
--
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
and the exact
may differ
Follow the instructions on the each
using
the
menu screen.
briefly during playback
to return to the beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
region
region code
a
for
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To return to normal
play,
press PLAY.
19
OPERATION
DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
(continued)
A*
VCD1.1
To
during playback.
The DVD/CD receiver will
now
go into PAUSE mode.
advance the
repeat
play,
1 Press SLOW SCAN
-
VCD2.0
m
or
+
"
*
A
"
briefly
appears
on
briefly
begins ("
Time Search
the TV
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat
again
on
"
appears the
display window).
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
during playback.
The DVD/CD receiver will enter SLOW mode.
2UsetheSLOWSCAN-morM+toselectthe
1 Press DISPLAY
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
display
appears
The
during playback.
the
on
at
playing
on-screen
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
Search icon in the
ote
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Slow motion
playback
in
is not
reverse
applicable
for
3 Within 10
Video CD.
the
seconds,
required
Repeat
CHAPT
DVD
VCD2.0
TITLE
DVD Video Discs
TRACK
use
the number buttons to enter
start time. Enter
seconds from left to
1 To
title:
a
3 To cancel the sequence, press REPEAT A-B.
VCD1.1
M
VCD1.1
OFF
"A B" appears
press PLAY.
DVD
VCD2.0
sequence in
a
sequence
Slow Motion
3
AB
2 Press REPEAT A-B
control.
3 To return to normal
DVD
1 Press REPEAT A-B at your chosen
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
can
A-B
Repeat
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
Operation
right
hours, minutes, and
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
OFF
4 Within 10
seconds, press ENTER
or
press PLAY to
confirm the start time.
-
Repeat Chapter/Title/Off
Playback
repeat the currently playing chapter, press
an
invalid
starts from the selected time
time, playback
the disc. If you enter
will continue from the current point.
on
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
Repeat
3 To exit
The
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
This unit
3D Surround effect, which
simulates multi-channel audio playback from two
third time.
1 To
repeat
The
2 To
-
Repeat
the track
Repeat
currently playing,
on
press REPEAT.
the TV
screen.
repeat the disc currently playing, press REPEAT
Repeat
3 To exit
The
All icon appears
Repeat mode,
Repeat
on
the TV
a
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
ote
On
Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 17.
a
20
speakers, instead of the
speakers normally required to listen to
a
home theater
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
second time.
The
a
multi-channel audio from
Track/All/Off
Track icon appears
produce
conventional stereo
screen.
more
Video CDs
can
again
to select "BYPASS".
five
or
system.
during playback.
effect, press SOUND
DVD and Video CD
General Features
Zoom
VCD2.0
DVD
Operation
(continued)
during playback
or
still
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
level
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
playback
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
menu
menu
will appear
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
DVD
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
mark, follow these steps.
a
disc
playback, press MARKER when
reaches the spot that you want to
During
playback
Camera
The Marker icon will appear
on
the TV
briefly.
screen
1 to enter up to nine Marker
Repeat step
points
on a
disc.
To Recall
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
a
Angle
If the disc contains
memorize.
2
The disc
to
angle
appears
the TV
on
a
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
2 Within 10
press SEARCH.
menu
will appear
seconds, press 1/2
buttons to select
a
or use
on
the
Audio
screen.
the number
Marker number that you want to
recall.
4 To
will start from the Marked
remove
Press AUDIO
ferent audio
scene.
1
a
During
the MARKER SEARCH menu, press
ferent audio
playback,
The MARKER SEARCH
2
will appear
on
the
screen.
different subtitle
erase.
ABC
dif-
a
dif-
1 ENG
repeatedly during playback
languages.
to
see
the
ote
Press CLEAR.
If
The Marker number will be erased from the list.
4
repeatedly during playback to hear
channel (STER., LEFT or RIGHT).
DVD
a
VCD1.1
Press SUBTITLE
press SEARCH.
menu
to hear
Press 1/2 to select the Marker number that you want
to
3
Subtitles
Marked Scene
disc
VCD2.0
5.1 CH
Press AUDIO
SEARCH.
To clear
repeatedly during playback
language or audio track.
Audio Channel Selection
3 Press ENTER.
Playback
Language
Selection
D
DVD
Repeat steps
2 and 3 to
erase
appears, the feature is not available
on
the disc.
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
Audio and MP3/WMA Disc
Operation
Notes
Playing Audio CD and MP3/WMA Disc
CD
MP3
play
can
1
disc and close the
MPEG1 audio
files that have
on
tray.
The
player
CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read
extension other than
About
Audio
a
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
The MP3/WMA
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
menu
MP3 WMA
1.
2.
3.
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
5.
OFF
00:00
Media
a
compatibility
as
4
or
playback
should be named
move
Program
CD
menu.
to the
previous
page.
Program
MP3 WMA
TRACK 3
TRACK 4
TRACK05
TRACK 5
TRACK06
TRACK 6
TRACK07
TRACK 7
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
BYPASS
menu
are
use
in
Clear All
TRACK 8
00:00
1
MP3/WMA
and
highlight
previous menu screen.
stop playback
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
at any other
requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
or
are
WMA
conditions
files). That require certain pre-existing
(see above) to insure compatible playback.
OFF
Customers should also note that
menu
file list and want to return to the Folder
the 3/4 to
return to the
To
a
".wma" extension
7.
MP3
ip
If you
less
many different types
of recordable disc formats (including CD-R containing
TRACK 2
TRACK04
or
"********.WMA".
set to these standards. There
TRACK 1
TRACK03
or
or
8 letters
This DVD/CD receiver
TRACK01
TRACK02
incorporate ".mp3"
using
to the next page.
move
Press MENU to
22
names
e.g. "********.MP3"
Press TITLE to
5
File
MP3/WMA file in the 1st
or use a new one.
Playback starts.
During playback,
time will appear on the display window and
Playback will stop at the end of the disc.
list,
6.
no
playback
and must
elapsed playing
follows:
MP3/WMA files. If you wish
MP3/WMA files, format all the data in
cannot
ENTER.
the current track's
with this DVD/CD
CD Creator", which creates an ISO9660 file system.
A single session disc requires MP3/WMA files in the
to
track then press PLAY
offers double the audio
-
the disc
a
Audio)
compression
Sampling Frequency / only at 44.1kHz (MP3),
32 44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
track, it
folder, and ENTER.
3 A list of files in the folder appears.
Press 3/4 to select
Audio)
the MP3 format.
first track. If there is
Press 3/4 to select
Media
-
Folder1
Folder8
file
a
-
4.
Program
MP3 file that has
Microsoft audio
receiver is limited
Press 3/4 to select the MP3/WMA then press
ENTER.
an
".mp3".
WMA(Window
An WMA file is
MP3 WMA
2
Recordings
An MP3 file is audio data
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
MP3/WMA Recordings on right.
a
MP3/WMA
About MP3
WMA
The DVD/CD receiver
Insert
on
press ENTER to
time, press STOP.
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
right
Audio and MP3/WMA Disc
CD
Pause
MP3
1 Press PAUSE/STEP
Operation (Continued)
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
Selecting
CD
MP3
or
>
playback to go to the next track
beginning of the current track.
Press SKIP/SCAN . twice
the
In
previous
briefly during
or
step back
to
to
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
case
during playback.
Repeat
1 To
Track/All/Off
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
Repeat
icon and "A
Repeat
menu
*
"
appears
on
repeat
all tracks
on a
disc, press REPEAT
a sec-
ond time.
The
Repeat
icon and "ALL" appears
on
the
at your chosen end point.
icon and "A B" appears on the menu screen,
begins
to
play repeatedly.
The
Repeat
icon and "OFF" appears
3D Surround
This unit
The
Repeat mode,
Repeat
Search
CD
MP3
two seconds
during playback.
The
now
will
menu screen.
3D Surround effect, which
simulates multi-channel audio playback from two
can
produce
a
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
again
or
during playback.
effect, press SOUND
to select "BYPASS.".
the
a
third time.
menu screen.
CD
Press AUDIO
different
repeatedly during playback to hear a
audio channel (STER., LEFT, or RIGHT).
WMA
1 Press and hold SKIP/SCAN .
player
on
the
press
menu screen.
press REPEAT
icon and "OFF" appears
on
play,
CD
Audio Channel Selection
3 To cancel
menu screen.
again
screen.
2 To
the
3 To exit the sequence and return to normal
REPEAT A-B again.
track.
CD
sequence.
disc playback, press REPEAT A-B at your cho-
and the sequence
to return to the
briefly
a
2 Press REPEAT A-B
WMA
The
Press SKIP/SCAN .
CD
During
sen starting point.
The
Tracks
A-B
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or
>
repeatedly
to select the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
mode, press PLAY.
23
OPERATION
JPEG File
Viewing
Operation
JPEG Files
Press SKIP/SCAN .
This DVD/CD receiver
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
1
a
can
disc and close the
menu
appears
on
the
screen.
>
or
once
to advance to the next file
picture
or
during viewing a
to the previous file.
Still Picture
1 Press PAUSE/STEP
tray.
The MP3/WMA-JPEG choice
TV
another File
Selecting
JPEG
during
The DVD/CD receiver will
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
now
MP3 WMA
Flipping
JPEG
2
menu
appears
on
the TV
picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
to
flip
the
screen.
Rotating picture
JPEG
Press 1/2
Folder1
Folder2
clockwise
picture
Folder3
during showing
or
a
picture
to rotate the
counter clockwise.
Folder4
Folder5
Folder6
Folder7
Notes
Folder8
Slide
Speed
JPEG Files
on
Off
upon the size and number of the JPEG
files, it could take a long time for the DVD/CD
receiver to read the disc's contents. If you don't see
Depending
Press 3/4 to select
a
folder, and ENTER.
3 A list of files in the folder appears.
Press RETURN to
choice
move
to the MP3/WMA-JPEG
the files
menu.
list,
are
"
a
file list and want to return to the Folder
on
the remote to
highlight
If you want to view a particular file, press 3/4 to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
file, press RETURN to
During viewing
the previous menu (JPEG menu).
Press TITLE to
move
to
move
Folder1
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
ip
There
are
three
Normal, Slow, and
Slide
Speed options: Fast,
Off. Press 1/2 to highlight the Slide
3/4 to select the option you want to
viewing
then press
use, and press ENTER.
Speed
To
stop viewing
The JPEG
24
menu
at any other
appears.
on
the disc should
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
rename
File
them
names
into the CD
layout.
time, press STOP.
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
be read
by
files
shown
are
explorer.
Picture1.jpg
5/32
Total number of files and folders
and burn anoth-
If the files have
to the next page.
Press MENU to move to the previous page.
JPEG
pixels
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
a
5
---
be less than 650.
and press ENTER to return to the
previous
4
in
the 34 buttons
use
"
are
after several minutes, some of
reduce the resolution of the
JPEG files to less than 2 mega
er disc.
ip
If you
display
too big
an on-screen
".jpg"
extension will not be able to
this DVD/CD receiver. Even
as
JPEG
image
though
the
files in windows
Programmed Playback
CD
VCD2.0
Audio CD and MP3/WMA Disc
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Press PROGRAM
1
mode to enter
The
during playback or in
the Program Edit mode.
the
E
mark will appear to the right of the word
the right side of the menu screen.
on
On
Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 17.
a
Program
contain 30 tracks.
can
Programmed Playback
ote
Program
Program
WMA
Video CD
Programmed Playback
The
MP3
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
tray.
is
playback
stopped.
will appear.
Program
E
TRACK 1
Press PROGRAM to exit the
the
menu
VCD
ote
E
OPERATION
contain 30 tracks.
can
Program
TRACK 2
Edit mode;
TRACK 3
TRACK 4
mark will
disappear.
TRACK 5
TRACK 6
TRACK 7
2
Select
track, then press ENTER
selected track
on
3
Repeat step 2
Program list.
to
a
the
place
place
the
list.
additional tracks
on
the
ote
Press RETURN
E
Program
CD
Program
to
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
PROGRAM to exit the
or
3
Follow
2-6 of
steps
TRACK 7
TRACK 7
Clear All
0: 56: 18
Audio CD and MP3/WMA disc"
STER.
BYPASS
4
Clear All
TRACK 8
00:00
3
OFF
To
Audio CD
left.
on
normal
MP3/WMA
menu
disappears
Press 2.
programmed
track you selected last is
highlighted
on
the program list.
5 playing.
To
The
Tracks
icon and "TRACK" appears
Repeat
To
repeat all tracks
The
move
on
the
menu
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after
have played once.
all of the tracks
on
the
Program
list
a
Track from
playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
on
the
menu screen.
the
on
menu screen.
press REPEAT
icon and "OFF" appears
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
normal
disappears
Repeat mode,
Repeat
Erasing
on
icon and "ALL" appears
Repeat
The
6 Playback begins
the program list, press
second time.
a
To cancel
Press PLAY to start.
"PROG." indicator
window.
repeat the track currently playing, press REPEAT.
REPEAT
to the next page.
Press MENU to move to the previous page.
resume
display
screen.
Press 3/4 to select the track you want to start
Press TITLE to
in the
menu
Repeat Programmed
7
with
playback from
programmed playback, press PROGRAM.
resume
"PROG." indicator
To
"Programmed Playback
TRACK 5
TRACK 6
The
menu.
TRACK 3
TRACK 4
TRACK 6
TRACK 8
4
Program
E
TRACK 8
TRACK 1
TRACK 5
Clear All
TRACK 8
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Country
Code
Volume
Menu
0dB
Size
Aspect
Progressive
Scan
switch off the
If you load
tings memorized, the latest stop
ly recalled.
Small
Distance
Language
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
TV
R
user
0.3m
Test
player.
a
disc that has its set-
position
is automatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the
2
While "5.1
on
setup
the 3/4
is
System
Press 2 buttons to select the desired
Speaker
Select
speaker.
341 2 buttons.
selection
speaker
adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC, or
AUTO).
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
AUTO:
Select when DVD/CD receiver is connected
Size
Since the
speaker settings
settings.
the
are
fixed, you
cannot
change
Distance
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
the volume to match the volume
memorized in the
Front Left
Rear
(L)
Right (R)
speaker.
of test signals
system.
→
Centre
→
→
Front
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
26
system TV.
Select when DVD/CD receiver is connected
Select when DVD/CD receiver is connected
with PAL-TV.
~
previous
menu.
not be
with NTSC-TV.
PAL:
level of the selected
not coincide with the
displayed.
Dolby
Volume
system does
system of your TV, normal colour picture may
NTSC:
ote
adjust the output
speaker. (-6dB +6dB)
com-
You must select the
with Multi
Press 1 / 2 to
disc if
Select
When the selected
that you want to
a
a
selected, press 2
button.
3
Adjust options by using
4
time.
you switch off the DVD/CD receiver before
mencing to play it.
menu.
Speaker Setup"
Settings are stored in memory for use any
This player does not memorize settings of
Radio
Operation
Radio stations
Presetting
You
can
ing,
make
50 stations for FM and AM. Before tun-
preset
sure
that you have turned down the volume.
Press BAND
1
on
the remote control until FM
AM appears in the
2
3
display
or
window.
And then every time you press
AM changes alternately.
or
panel for about two seconds
frequency indication starts to change,
2
until the
when the DVD/CD Receiver tunes in
appear in the
display
stereo
(for
play
or
FM appears in the dis-
window.
Press PRESET +/-
one
3
a
program)
window.
to select the pre-
repeatedly
set station you want.
Each time you press the button, the DVD receiver tunes in
then
release.
station. "TUNED" and "STEREO"
1
Press BAND until AM
The last received station is tuned in.
on
the front
Scanning stops
Preset radio stations in the DVD/CD receiver's memory
first (see "Presetting radio stations" on the left).
BAND, FM and
Press and hold TUNING
to the Radio
Listening
preset station
at
time.
a
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
appears when the
only
signal
To listen to
4
A
on
the front
panel.
For manual
the front
on
5 panel
or
to select the
on
the front
preset number you
or
6
7
on
the front
panel again.
3 to 6 to store other stations.
To select
You
station with
a
Press TUNING
a
weak
to tune in the station
signal
repeatedly
or
in
step
3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
then press
appeared in the display window and
MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
step
2.
tuning,
or
press and hold TUNING
for about two seconds
on
the front
change
preset radio station directly
a
can use
to select
To tune in
in
panel.
The station is stored.
Repeat steps
tuning
tuning, press TUNING
panel repeatedly.
For automatic
want.
automatic
or
Press MEMORY
AUX).
non-preset radio stations
Use manual
preset number will flash in the display window.
Press TUNING
or
select
is FM and
STEREO.
Press MEMORY
(CD/DVD
or
the number buttons
on
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
a
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
"STEREO" disappears in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
on
the front
effect.
To
improve reception
Reorient the supplied antennas.
to normal mode.
ote
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
the
preset number, follow the steps
a
5-6
as
above.
27
OPERATION
Radio
Operation (Continued)
Sleep
Timer
You
set the DVD/CD receiver to turn off automati-
can
cally
1
at
a
specified
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
2
Dimmer
Setting
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The
display
28
change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
the
telephone,
window.
remaining
time appears in the
to
example,
"MUTE" indicator flashes in the
answer
display
window.
Using Headphone
ote
You
This function will
Connect
a
stereo
Jack
headphone plug ( 3.5mm)
into the
PHONES connector.
The
speakers are automatically disconnected
plug in a headphone (not supplied).
when you
Language
Code List
Enter the
appropriate
(See page 16).
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
29
Code List
Country
Enter the
appropriate
code number for the initial
setting "Country
Code"
(See
page
18).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
DE
30
Barbuda
Verde
Republic
Georgia
& S. Sandwich
(USA)
Islands
Anguilla
Mayen
Islands
Republic
Principe
Territories
(French)
Tobago
Kingdom
Minor Outlying
Islands
Miquelon
(French)
City
State
Grenadines
Islands
Islands
(British)
(USA)
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
the power cord
wall outlet.
The power is on, but
the DVD/CD receiver
?
No disc is inserted.
?
Insert
Plug
does not work.
No
(Check
lit.)
picture.
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
appropriate video input mode
so the picture from the DVD/
CD receiver appears
?
The video cable is not connected
?
securely.
There is
no
sound
or
?T
?
The
?
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is poor.
The DVD/CD receiver
does not start
the TV.
Select the correct
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
Insert
?
jacks
you can hear the
sound from the DVD/CD receiver.
securely.
The
urn on
audio receiver
signal output.
?
screen.
securely.
The connected TV power is turned off.
a
the TV
on
Connect the video cable into the
?
very low-level
sound is heard.
only
into the
that the DVD or,
audio CD indicator in the DVD display is
a
disc.
securely
connecting
cable is
damaged.
dirty.
urn on
the
equipment
connected with
the audio cable.
playback.
it with
new one.
a
disc.
that the DVD, or
audio CD indicator in the DVD display is
a
playable
(Check
lit.)
?
An
disc is inserted.
unplayable
?
Insert
(Check the disc
system and Regional code.)
type, colour
?
The disc is
placed upside
down.
?
disc.
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?Amenu
is
dirty.
on
the TV
screen.
on
the disc
tray correctly
guide.
?
Clean the disc.
?
Press the SETUP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
and
plugs
jacks
are
dirty.
?
rating
Wipe
function
Rating
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
?
dirty.
and
speakers
components
connected poorly.
are
The DVD/CD receiver is located too
close to the TV.
?
Clean the disc.
?
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
31
REF NC
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
signal strength
weak (when tuning
tuning).
of the stations is too
?T
une
in the station
in with automatic
No stations have been
preset
or
preset
manually.
?
Preset the stations
?
Point the remote control at the remote
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
of the DVD/CD receiver.
The remote control is too far from the
sensor
?
DVD/CD receiver.
?
There is
an
obstacle in the
Use the remote control within about 23
ft
path
of the
of the DVD/CD receiver.
(7 m).
?
Remove the obstacle.
?
Replace
remote control and the DVD/CD
receiver.
?
The batteries in the remote control
flat.
32
are
the batteries with
new ones.
Specification
Power
Power
[Genral]
Refer to main label
Mass
External dimensions
[CD/VD]
[Video]
AM
[MW]
x
H
x
D)
360
x
75
x
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL 625/50, NTSC 525/60
Designs
5°C to 35°C,
Operation
status: Horizontal
wavelength
650
REF NC
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
108.0 MHz
-
or
65.0
-
74.0
MHz, 87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
+
Subwoofer*: 60W
25W
(8Ω
(6Ω
at 30
at 1
kHz, THD 10 %)
Hz, THD 10 %)
MONITOR
Satellite
[Suplied Acesori ]
mm
Laser
PHONES:
[Speakrs]
314
5% to 85%
Surround mode
[Amplifer]
kg
Temperature:
S-video
[FM]
(W
3.8
Operating conditions
Operating humidity
Video
[Tuer]
Refer to main label
supply
consumption
1
Type
Impedance
Frequency Response
Way
140
1
Speaker
-
Passive Subwoofer
1
Way
H
x
D)
1
(LHS-D6246W)
Speaker
8Ω
20,000 Hz
81 dB/W
Rated
x
Speaker (LHS-D6246T)
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 20mW)
(1m)
60
-
1,500 Hz
80 dB/W
(1m)
25W
60W
50W
120W
89x130x114mm
160x350x333mm
0.5
kg
4.5
kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
and
specifications
are
subject
to
change
without notice.
33
P/N: 3834RH0025J
Download PDF

advertising