LG | LH-R5500SB | LG LH-R5500SB Owner’s Manual

LH-T5500SB NA3SLLA
DVD
Recorder Receiver
System
OWNER'S MANUAL
MODEL:LH-R5500SB
(Main Unit: LH-R5500W
Speakers: LHS-55SBS, LHS-55SBC,
LHS-55SBW)
CD-R/RW
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
Safety
Precautions
CAUTION concerning the Power Cord
CAUTION
Most
appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
point
is intended to alert the
within
user
additional outlets
no
or
branch circuits. Check the
specification page of this owner's manual
to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose
damaged wall outlets, extension cords, frayed power cords,
damaged
or
cracked wire insulation
are
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in
such as a bookcase or similar unit.
confined space
a
or
or
dangerous. Any of
these conditions could result in electric shock
This
The exclamation
and has
or
fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
The
appliance is
not intended for use
infirm persons without
by young children
or
supervision.
Young Children should be supervised
not play with appliance.
to ensure that
they do
If the
appliance is supplied from a cord extension set or electrical portable outlet device, the cord extention set on electrical
portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
SERIAL NUMBER:
You
can
find the serial number
on
the back of the unit. This
unique to this unit and not available to others. You
should record requested information here and retain this guide
as a permanent record of your purchase.
number is
Model No.
Serial No.
CAUTION:
This
To
product employs
ensure
proper
use
a
______________________________
______________________________
Laser
of this
System.
product, please
read this owner's
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radimanual
ation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION:
CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
2
Manufactured under license from
Dolby Laboratories. "Dolby",
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are registered trademarks of
Digital Theater Systems, Inc.
Table of Contents
?DVRecordAudio.....................29
INTRODUCTION
SafetyPrecautions.......................2
TableofContents........................3
DVD Recorder Receiver Overview
.
.
.
.
.
.
.
4-10
.
.4
RecordableandPlayableDiscs.
PlayableDiscs.........................5
RemoteControlOperation................5
.
.
.
.
.
.
.
.
.
.
Disc-relatedterms......................6
AboutSymbols.........................6
Aboutrecordablediscs...................7
AboutDVDrecording...................8-9
Precautions..........................10
NotesonDiscs........................10
FrontPanel............................11
RemoteControlOverview................12
HOOKUP
?AutoChapter........................29
Disc..............................30-31
?Initialize............................30
?DiscProtect.........................30
?Finalize............................31
?DiscLabel..........................31
Overview for the On-Screen
Display
.
.
.
.
.
.
.
.
32
PLAYBACK
.33-36
DVDandVideoCDOperation.
PlayingaDivXMovieDisc................37
Audio CD and MP3/WMA Operation
38-40
38-39
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................40
JPEGFileOperation..................41-42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Connections........................13-21
RearPanelConnections.................13
ConnectingtotheAerial.................13
ConnectionstoYourTV.................14
Accessory
Audio/Video
(A/V) Connections
toDVDRecorderReceiver...............15
ConnectingaDigitalCamcorder.
.
.
.
.
.
.
.
.
.
.15
RadioAerialConnections................16
.17
SpeakerSystemConnections.
SpeakerPositioning....................18
.19
MiniGlossaryforSoundMode.
DelayTimeSetting...................20-21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RECORDING
BasicRecording........................43
.43
BasicRecordingfromTVchannels.
InstantTimerRecording.................43
TimerRecording.....................44-45
Recording from an External Input Source 46-47
46
Recording from External Components
46
Recording from a Digital Camcorder
.
TestTone............................21
XTS(ExcellentTrueSound)..............21
XTSpro.............................21
SETUP
Pre-operationSetup..................22-32
InitialSettings.........................22
General...........................22-28
?AutoProgramming....................22
?ProgramEdit.....................23-24
?ManualClockSet....................25
?TVAspectRatio.....................25
?DisplayMode.......................25
?ProgressiveScan....................25
?PBC..............................26
?FactorySet.........................26
Language............................26
?DisplayLanguage....................26
?DiscLanguage......................26
Audio...............................26
?DolbyDigital........................26
.26
DRC(DynamicRangeControl).
Lock(ParentalControl)...............27-28
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WhatisDV?..........................47
EDITING
48
Chapter List Menu Overview
.49-54
TitleandChapterEditing.
Titles,Chapters,andParts...............49
AddingChapterMarkers.................49
ChangingTitleThumbnails...............49
MakingaNewPlaylist...................50
Adding Additional Title/Chapters to the Playlist 50
DeletingaTitle/Chapter.................51
DeletingaPart........................51
NamingaTitle........................52
.52
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................53
Title List and
.
.
.
.
SoundLevel..........................21
.
.
.
?SetPassword.......................27
?Rating.............................27
?AreaCode..........................28
?DivX(R)VOD........................28
Recording............................29
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle.........................53
HideaChapter........................54
DividingOneTitleIntoTwo...............54
REFERENCE
AdditionalInformation...................55
OverwritingRecording..................55
Viewing Title List menu displayed on
.55
otherDVDRecordersorPlayers.
Playing Your Recordings on Other
.55
DVDPlayers(FinalizingaDisc).
RadioOperation........................56
.57
LanguageCodeandAreaCodeList.
Troubleshooting.....................58-59
Specifications.......................60-61
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?RecordModeSet....................29
?RecordAspectRatio..................29
3
INTRODUC
DVD Recorder Receiver Overview
Recordable and
DVD-RW
DVD-RW discs
the
Video Disc
(Digital
These Discs
Discs
Playable
ReWritable):
be formatted for VR mode
can
can
-
be recorded
on
recording or Video mode recording.
repeatedly. Recordings can be erased, then you can
record
again
on
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc
(Digital
Recordable)
These Discs can be recorded only once. After you finalize
DVD-R discs can be only formatted to Video mode.
Playable on regular DVD players (after finalization)
Limited editing features
DVD+RW
the
Video Disc
(Digital
These Discs
can
+
be recorded
ReWritable)
on repeatedly. Recordings
a
can
DVD-R, you cannot record
be erased, then you
it
record
or
edit it.
again
on
(Digital
These Discs
Video Disc
can
be
Recordable)
recorded only once. After
after finalization
+
you finalize
a
DVD+R, you cannot record
on
it
or
edit it
more.
any
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
The recommendable recordable DVD discs
DVD-R
DVD+R
SONY (8x, 16x)
SONY (2.4x, 4x, 8x, 16x)
TDK
DVD-RW
TDK
(4x, 8x)
Verbatim (4x, 8x)
Panasonic (2x, 4x)
(4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
Victor
(1x, 4x)
Maxell (1x, 2x, 4x)
TDK (2x)
Mitsubishi (2x)
DVD+RW
SONY (2.4x)
TDK
(2.4x)
Philips (4x)
Ricoh (2.4x)
---H P (2.4x, 4x)
Note:
If
a
DVD-RW/DVD+RW discs is recorded
recorder. So if you want to
4
on
DVD+RW
compatible players (automatically finalization)
The edited contents are playable on DVD+RW compatible players only
Recordings can be edited the title/chapter
DVD+R
can
on
Disc.
same
Playable
-
use
the disc
other recorder, you cannot format the disc using this
this DVD Recorder Receiver, you must format the disc using the original recorder.
using
on
a
personal computer
or
DVD Recorder Receiver Overview
Playable
Discs
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
be
/ 12
can
purchased
or
rented
INTRODUC
disc)
cm
CD-Rs/CD-RWs in VIDEO
CD/Super VIDEO CD
format
AudioCD(8cm/12cmdisc)
Music CDs
CD-Rs/CD-RWs in music CD format that
or
CD-R/CD-RW
(8
cm
/ 12
can
be
purchased
disc)
cm
CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
--
--
--
--
--
--
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CDcannot be played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not
be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may
not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
Depending on the conditions
R/RW (or DVD±R/RW) discs
Regional
code of the recorder and DVDs
This recorder is
3
of the
code
on
designed
the labels of
and manufactured for
some
playback
DVD discs indicates which
Region
3 encoded DVD software. The
region
type of the recorder can play those discs. This unit
play any other discs, the message "Incorrect region
play only DVD discs labeled 3 or ALL. If you try to
code. Can't play back" will appear on the TV screen. Some DVD
though their playback is prohibited by area limits.
can
of
discs may not have
a
region
code label
even
Notes on DVDs and Video CDs
Some
unit
playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this
plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback
features of the unit may not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Remote Control
Operation
Point the Remote Control at the remote
Remote Control
Battery
sensor
and press the buttons.
Installation
Remove the
batteries with
battery
cover on
and
the
matched
rear
of the Remote Control, and insert two R03
(size AAA)
correctly.
Caution
Do not mix old and
new
batteries. Never mix different types of batteries
(standard, alkaline, etc.).
5
DVD Recorder Receiver Overview
Disc-related terms
(Continued)
Types
There
DVD±R/DVD±RW
DVD -R and DVD +R
two different standards for
of Video CDs
are
two
types of Video CDs:
recordable DVD drives and discs. This format allows
equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
information to be recorded onto the DVD disc
with the
system via
tion still
pictures
are
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
and double-sided discs hold twice
Gigabytes
as
much.
Title
(DVD only)
The main film content,
or music album.
Each title is
accompanying
assigned
locate it easily.
you to
a
feature content,
title reference number
enabling
(Video
functions, or other
typical computer-like operations. Moreover, high resolu-
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Video CDs not
On
a
About
"
and still
moving pictures
(Playback control) functions,
pictures
tions called "Scenes". Each
on
the Scene
enabling
A
scene
menu
and
are
scene
assigned
divided into
available is
a scene
sec-
displayed
number,
you to locate the scene you want.
may be composed of one or several tracks.
DivX
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
dard for video.You will be able to
using
this DVD
player.
new
they
with PBC
equipped
included
are
on
(Version 1.1)
Symbols
symbol display
manual is not available
during operation.
explained in this owner's
that specific disc, or at that
on
screen
time.
About the disc
symbols
A section whose title has
applicable only
symbol.
are
for instructions
one
of the
to those discs
following symbols
represented by the
functions
the
on
bols(
provided on this Recorder
recording mode. One or more
VR
,
Video
DVD+R
,
,
DVD+RW
see
at a
are
depen-
of the sym-
appear by
so that you can
(explained in this manual)
glance whether it's applicable to
each function
)
the disc
loaded.
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
DivX
DivX files
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
The finalized DVD disc is
6
if
played
may appear on the TV
This icon means the function
video codec
compression stanplay DivX movies
be
"
dent
Video CD with PBC
can
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Many
Scene
menus, search
the disc.
About the
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
Video CDs
a
recording
recording
mode
mode
DVD-Video disc.
DVD Recorder Receiver Overview
About recordable discs
How
are
(Continued)
DVD+RW mode
recordable discs different?
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R
recording +RW
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?
are
?
record-once medium, while DVD-RW and DVD+RW
re-recordable/erasable medium. You can re-record/
are
?
erase a
DVD-RW and DVD+RW disc
approximately
1,000 times.
DVD+R mode
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R, DVD+R and DVD-RW discs recorded in Video mode are playable in a regular DVD player,
but they must be 'finalized' first. This process fixes the
contents of the disc to make them readable to other
DVD
players
as
DVD-Video discs.
DVD-RW discs recorded in VR
are
playable
in
some
player.This
indicates
capable
of
with Video
What
are
There
are
mode
players.
Unfinalized DVD+RW discs
DVD
(Video Recording)
are
playable
in
a
regular
product feature that is
playing DVD-RW discs recorded
Recording format.
'recording
a
modes'?
various
recording modes available using this
Recorder. When recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
VR mode
VR
recording
?4different picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
avail-
?
+R
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
?
?
?
Note :
DVD-Video Format
(Video mode)
is
a new
format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
Is
editing
a
DVD like
editing
a
video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With DVD, you edit by making a 'Playlist' of what
to play and when to play it. On playback, the Recorder
plays
the disc
according
to the
Playlist.
?
Video mode
recording Video
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
About word
and
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
?
Original:
on
?
content refers to what's
actually
recorded
the disc.
content refers to the edited version of the
Playlist:
disc
mode
'Original'
---
how the
Original
content is to be
played.
Disc type
Disc format
Recording
Functions
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
Recording
format (default)
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
limited
Title/Chapter Editing
7
INTRODUC
DVD Recorder Receiver Overview
About DVD
(Continued)
Notes for
recording
?
This recorder cannot make
recordings
on
CD-R
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
of your discs.
care
Disc types and
and settings
This recorder
?
can
recording formats, modes,
play
five different kinds of DVD discs:
?
?
DVD-Video discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
always
"Video format"---the
ed DVD-Video discs. This
you
can
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
finalized,
will take up
8
on
the disc.
?
not exact because the
variable bit-rate video
that the exact
compression.
recording time will depend
the material
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 30
(Initialize) for how to do this.
When using a DVD-R disc, you can keep recording
The
until the disc is full, or until you finalize the disc.
Before you start a recording session, check the
DVD
player.
Video Recording
By default, the DVD-RW disc format is
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
means
are
disc.
pre-recorded
discs is
uses
times shown
being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the recording times may be shorter.
If you record still pictures or audio only, the recording
time may be longer.
The displayed times for recording and time remaining
may not always add up to exactly the length of the
on
?
to the Recorder.
?
This
or
CD-RW discs.
?
recording
recorder
Notes :
?
The
recording
amount of
?
recording time left on the disc.
When using a DVD-RW disc in Video mode, recording
time available will only increase if you erase the last
title recorded
?
?
on
The Erase Title
the disc.
in the Title
List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time available (except for the last recorded title on a DVD-RW
disc in Video mode).
Overwrite recording is available using DVD+RW
discs.
option
DVD Recorder Receiver Overview
Restrictions
on
video
Copyright
recording
?You cannot record
video
(Continued)
this
copy-protected
using
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
?V ideo signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
?
?
?
format.
What is 'CPRM'?
CPRM is
This
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
protection system (with scramble system) only allowing the recording of 'copy once' broada
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
copy
?
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COM-
cast programs. CPRM stands for Content Protection for
PATIBLE WITH THIS PRODUCT AND MAY CAUSE
Recordable Media.
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
This Recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
recordings
can
only
be made
on
DVD-RW discs format-
ted in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with
CPRM.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD Recorder
Receiver, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
9
INTRODUC
DVD Recorder Receiver Overview
Precautions
Notes
on
Handling
the unit
Handling
(Continued)
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When
Discs
discs
Do not touch the
disc
the
by
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
on
the disc.
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
When
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
such
liquids,
as
plastic products in
long period of time. They will
the unit. Do not leave rubber
contact with the unit for a
leave marks
on
insecticide spray,
or
discs
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable temperature
increase inside the car.
light,
as
the surface.
Cleaning
the unit
Cleaning
To clean the cabinet
Use
a
use a
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
lightly
use
thinner,
or
store the disc in its case.
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center outward.
alcohol,
the surface
of the unit.
Yes
To obtain
a
clear
No
picture
The DVD Recorder Receiver is
a
high-tech, precision
device. If the
optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Moisture Condensation
Never operate this product immediately after moving
it from a cold location to a warm location. Leave it for
operating it. If you
situation, it may damage
two or three hours without
product in such
discs/tapes and
10
a
internal parts.
use
this
Front Panel
a
b
c
d
eh
f
g
i
INTRODUC
jkl
a
h
POWER
Switches the DVD Recorder Receiver ON
b
Disc
a
e
f
Point the recorder remote control here.
i
disc here.
OPEN/CLOSE
Opens
d
OFF.
Tray
Insert
c
or
(Z)
Connect the DV output of
B
(PLAY)
Starts playback.
k
or
recording.
l
time.
g Display
digital
camcorder.
S-VIDEO IN
an
external
source
(TV/ Monitor, VCR, Camcorder, etc.).
z (REC)
Starts recording. Press repeatedly to set the record-
ing
a
Connect the S-Video output of
x
(STOP)
Stops playback
VOLUME CONTROL
Turn the knob clockwise to increase sound level,
counterclockwise to decrease sound level.
jDVIN
closes the disc tray.
or
Remote Sensor
AV 2
(VIDEO IN/AUDIO
IN
(Left/Right))
Connect the audio/video output of
(Audio system,
Camcorder, etc.).
source
an
TV/ Monitor,
external
VCR,
window
Shows the current status of the recorder.
REC: The recorder is
MUTE: The
D :
,
speaker
Indicates
recording.
sound is muted.
encoding
format of the current
disc.
PLII :
or
Indicates sound mode is DOLBY PRO LOGIC
DOLBY PRO LOGIC II.
:
or a
Indicates when the recorder is in timer
timer
recording
is
recording
programmed.
Indicates clock, total playing
time, title number, radio frequency,
:
time, elapsed
volume, Surround, chapter/track number, channel,
etc.
11
Remote Control Overview
POWER
Turns DVD Recorder Receiver ON and
OFF.
CD/DVD
Select the DVD Recorder Receiver's
function mode to DVD.
FM/AM Tuner select
Select FM
AM band
the
listening
choice. (FM and AM bands).
or
as
0-9 numerical buttons
Selects numbered options in
a menu.
TITLE
menu, if
Displays the disc's Title
available.
OPEN/CLOSE
Opens
AV
Changes the input to use for recording.
(Tuner, AV 1, OPT, AV 2 or DV).
PIP
Selects PIP function
adjust the sound balance of the
speakers from the listener's position.
SUBTITLE
Selects
Marker Search
Displays
menu.
ZOOM
Enlarges
Accesses
DVD video
menu
image.
MENU/LIST
on a DVD disc,
Switches between Title List-Original and
Title List-Playlist menu.
DISPLAY
Accesses On-Screen
Display.
Displays information while viewing a TV
program.
LEVEL
To set the sound level of desired channel.
SKIP(-/+) (.
/
>)
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to
previous chapter
or
track.
DELAY
delay time of each speaker in
Dolby Digital and Dolby Pro Logic II mode.
To set the
SCAN(-/+) (m/M)
Search backward
or
forward.
PAUSE/STEP
Pause
playback
(X)
recording
temporarily.
or
B
(PLAY)
Starts playback.
STOP
Stops playback
or
(x)
recording.
z
REC
Starts recording. Press repeatedly to set
the recording time.
REC MODE
Selects the recording mode:
HQ, SQ, LQ or EQ.
TIMER REC
Displays Timer Record
menu.
MUTE
Turns the sound
12
on
and off
temporarily.
subtitle
a
language.
AUDIO/MO.ST.
Selects an audio language.
Selects STEREO or MONO.
-
SEARCH
off.
To
MARKER
point during playback.
on or
TEST TONE
-
Marks any
and closes the disc tray.
SOUND MODE
Selects sound mode.
XTS
To
enjoy great sound effect.
XTS pro
To
enjoy
more
natural and realistic
sound.
SETUP
Accesses
or removes
the
Setup
menu.
bBvV(left/right/up/down)
Selects
menu
options.
PR/PRESET(+/-)(v/V):
Select programme of TV
or
Radio.
MEMORY/ENTER
-
-
Confirms menu selections.
Stores a radio station's frequency in
the tuner's memory.
RETURN (O)
Removes the menu.
VOLUME
To adjust
volume.
(+/-)
speaker volume and
TV
INSTANT SKIP
Skips 15 seconds forward on the disc
(about the length of a typical TV: commercial).
CHP ADD
Inserts
chapter marker when playing/
recording.
a
THUMBNAIL
Selects
thumbnail picture for the
current title for use in the Title List
a
Chapter
List
or
menu.
CLEAR
Removes
a
mark
on
the Marker Search
menu.
REPEAT
Repeat chapter, track, title
or
all.
REPEAT A-B
Repeats sequence between
(A and B)
two
points
Connections
Rear Panel Connections
a
bc
d e f
g
HOKUP
hj
i
kl
a
Plug
b
h
AC Power Cord
into the power
i
supplied speakers
d
of
Digital
Device.
Connect the video output of
Connect the FM antenna to this terminal.
(Audio system, TV/Monitor, VCR, Camcorder).
AUDIO IN 1
n
(Left/Right)
AUDIO OUT
(Left/Right)
Connect to
TV with audio
an
external
a
inputs.
Pb
l
m
an
external
source
VIDEO OUT
Connect to
source
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
(Y
a
TV with video
inputs.
S-VIDEO OUT (DVD OUT)
Connect to an S-Video Input
on
TV.
RF. OUT
Passes the
signal
from the AERIAL to your TV/moni-
tor
Pr)
Connect to
g
optical output
FM ANTENNA CONNECTORS
(Audio system, TV/Monitor, VCR, Camcorder).
f
an
jVIDEOIN1
Connect the audio output of
e
OPTICAL IN Connector
Connect
to these
terminals.
c
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
source.
SPEAKER CONNECTORS
Connect the six
m
a
TV with Y Pb Pr
inputs.
ANT.IN
Connect the aerial to this terminal.
Connecting
to the Aerial
Rear of TV
Aerial
ANTENNA
INPUT
plug from your TV set and
insert it into the aerial socket at the back of the
Remove the aerial cable
recorder.
socket
input
on
Plug
one
A
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
on
R
your TV set.
RF coaxial connection
Connect the RF. OUT
jack on the DVD Receiver
Recorder to the aerial input jack on the TV using the
75-ohm Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
Rear of the DVD Recorder Receiver
13
Connections
(Continued)
Connections to Your TV
Tips
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
Depending
on
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
Make
the
Connect the S-VIDEO OUT
cable
sure
the DVD Recorder Receiver is connected
directly to the TV.
input channel.
--
jack
to the
phono
in
of your
jack (record deck)
audio system.
Do not connect your DVD Recorder Receiver via your
VCR. The DVD image could be distorted by the copy
cable
L
R
S-VIDEO
COMPONENT VIDEO INPUT
Y
Pb
INPUT
Pr
using
the S-Video
jack on the DVD Recorder
jack on the TV using the video
(V).
Component
Video connection
Connect the COMPONENT VIDEO OUT
DVD Recorder Receiver to the
on
the TV
using
If your television is
AUDIO INPUT
the DVD Recorder
Connect the VIDEO OUT
Progressive Scan
Rear of TV
the TV
on
Video connection
jacks
protection system.
VIDEO
INPUT
on
Receiver to the video in
Do not connect the DVD Recorder Receiver's AUDIO
OUT
--
Tune the TV to the correct video
jack
jack
(S).
Caution
Make
on
S-Video connection
to the S-Video in
best connections.
--
of the
following connections, depending
capabilities of your existing equipment.
one
an
Y Pb
jacks on the
corresponding input
Pr cable (C).
connection
high-definition or "digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
a
Connect the COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
V
A
C
S
jacks
jacks
on
the recorder to the
on
the TV
using
the Y Pb Pr
corresponding
cable (C).
in
Notes :
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 25.
Set the progressive to "Off" by removing any disc
from the unit and close the disc tray. See that "NO
DISC" is displayed on the display window. Then
press STOP and hold it for five seconds before
releasing it.
Progressive
scan
does not work with the
video connections
Audio
(Left/Right)
Connect the left and
Rear of the DVD Recorder Receiver
14
analog
(yellow VIDEO OUT jack).
Connection
right AUDIO OUT jacks of the DVD
Recorder Receiver to the audio left and right IN jacks
on the TV using the audio cables (A). Do not connect
the DVD Recorder Receiver's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connections
(Continued)
Accessory Audio/Video (A/V)
Connecting
Connections to DVD Recorder
the front panel DV IN jack, it is possible to
connect a DV digital camcorder and digitally transfer DV
tapes to DVD.
input jacks (AV1, AV2)
on
the DVD
Recorder Receiver to the audio/video out
accessory component,
jacks
on
your
use
VIDEO IN
the S-VIDEO IN
jack
on
the
jack on the front panel,
front panel is not available.
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder to the front
of this DVD Recorder Receiver.
Note:
If you
Use
jack
audio/video cables.
using
Digital Camcorder
Using
Receiver
Connect the
a
the
panel
DV IN
jack
Note:
This
It is
jack is for connection to DV digital camcorder only.
not compatible with digital satellite tuner or D-VHS
video decks.
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
DV
S-VIDEO
OUTPUT
Digital Camcorder
DV
IN/OUT
AUDIO
OUTPUT
OR
R
L
VIDEO
OUTPUT
OR
Rear of the DVD Recorder
Front of the
Receiver
DVD Recorder
Front of the DVD Recorder Receiver
Receiver
15
HOKUP
Connections
(Continued)
Radio Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Connect the AM Loop aerial to the AM aerial connector.
Connect the FM Wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop aerial (supplied)
(supplied)
Notes:
To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
FM Wire
aerial, keep it
as
horizontal
as
possible.
About Ferrite Core
Be
sure
cables
to attach the ferrite core to the
(for connecting
This ferrite
to this
unit).
reduce noises.
core can
How to attach the ferrite
1
speaker
Press the stopper
core
[a] of the ferrite
core
to
open.
2
Wind the cable
once on
the ferrite
core.
The
3
Close the ferrite
core
length here is
short
unitl it clicks.
as
possible.
Note:
Attach the ferrite
and
16
comment.).
core near
the unit
(Refer
to the
fig.3
(Subewoofer)
much
as
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
possible
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (volume, distance, etc.).
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
front
speakers
with low maximum
input rating, adjust the volume carefully
to avoid excessive
output
on
the
speakers.
Before
Operation
Speaker Positioning
In the
case
of normal
position
the 6
use
speakers (2
front
1 center
speakers,
speaker,
2 rear
speakers
and sub-
woofer).
If you want to
a subwoofer.
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
the
speakers
for
equal
distance. And
set up the
by hearing position
Center
speaker
center speaker
The
and front
speakers
ideally
are
the
same
height.
But
normally place
it above
or
below the
television.
?
Rear
speakers
Place left and right
behind the
for surround sound
playback.
position
ers
and install them at
towards
In the
a
of
case
wall
a
ceiling
smaller
other, and set the
?
or
or
rear
listening
These
speakers
recreate sound motion and
For best results, do not install the rear speakers too far
above the level of the listener's ears. It is also effective
to further
room
area.
disperse
the sound.
size, if the audience is
speakers
above 60
-
90
atmosphere required
behind the listening
to direct the rear speak-
cm
near
to the rear wall set the rear
than the listener's
speakers opposite
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Front
Speaker
(Left)
Center
Speaker
Front
Speaker
(Right)
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
18
each
Before
Mini
Operation (Continued)
Glossary
for Sound Mode
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such
as discs, DVD and compact discs, etc. DTS Digital Surround deliv-
up to 6 channels of transparent audio(which means identical to
the original masters) and results in exceptional clarity throughout a
When
vides
playing recordings of live music and classic, this mode proa feeling similar to actually being in a small concert hall.
ers
degree sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
true 360
playing recordings of live music and classic, this mode provides
feeling similar to actually being in a large concert hall.
When
a
This mode
provides
a
three dimensional effect similar to that of
a
movie theater.
Dolby Digital surround format lets you enjoy up to 5.1(or 6)
channels of digital surround sound from a Dolby Digital program
source. If you play DVDs with
mark, you can enjoy even
better sound quality, greater spatial accuracy, and improved
dynamic range.
The
"
"
BYPASS
Outputs
the sound from the front left and
right speakers
and
subwoofer.
You
can
select BYPASS
by pressing SOUND MODE
on
the
remote control.
(II)
Dolby Pro Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
and
provides
with any stereo music recordings,
a wide and deep sound space. The Music mode
use
includes controls that allow the sound to be tailored to individual
listening
tastes.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
directional enhancement
audio to
mono.
19
HOKUP
Before
Delay
In
Operation (Continued)
Time
Setting
Pro Logic mode it is assumed
that the distance from the listener to each of the speakers is equal. If not then setting the delay times of the
center or rear speakers the sound will be heard simultaneously by the listener.
The interval from the speakers to the listener. If the distance from the listener to each speaker is the same, in
the Dolby Digital and Dolby Pro Logic mode the delay
time of each speaker is as follows
Dolby Digital
or
Dolby
In
Dolby Digital mode
Center delay time : 0
5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot be set
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be automatical~
~
ly
set.
The delay time is 1 msec per 30 cm.
If the Center and rear speakers are further than the
front speakers from the listener, the delay time will be at
minimum.
Surround
delay
time
(A)
1
The current surround
2
Press
3
If
delay time appears
in the
Display
/
to
is
setting
change
the
time.
delay
complete, press
DELAY.
Note:
You
adjust the center delay time only
mode and its delay time appears.
can
Setting
in the
Dolby Digital
the Sound Effects in the
Music mode of
Dolby
Pro
Logic (II)
Press SOUND MODE
repeatedly
to select the
Music mode.
Each time you press these buttons, the sound
mode is changed in the following order;
R
C
DC
Press DELAY.
Window.
1
setting
L
Setting the delay time in the
Dolby Digital and Dolby Pro
Logic (II) mode
PRO LOGIC
DF
→
PLII MOVIE
→
PLII MUSIC
PLII MATRIX→ HALL 1→ HALL 2
SW
BYPASS
→
→
THEATER
→
...
DS
SL
SR
(B)
2
Press DELAY.
The current surround
delay time appears
in the
Display
Window.
If the distance of DS is
longer than the DF in
the left figure, set the Surround Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener is
3 m and from rear speakers from the listener is 1.5 m,
in the Dolby Digital mode the rear delay time is 5 msec.
3m (DF)
1.5m (DS)
1.5m (B)
1.5m (B)
150cm / 30cm
5msec
equal
=
-
=
In
to or
3
Press
Each time you press the
in the following order;
PANO
4
Press
=
Center
15msec
5
15msec
~
delay
time
setting
equal
(Dolby Digital mode only)
to the distance of DC in
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the table
the left
below.
er
If the distance from the front
is 3m and from the center
speakers to the listenspeaker to the listener is
2.4m, the center delay time is 2msec.
3m
(DF)
60cm (A)
20
-
change
the steps.
+3
~
25msec
If the distance of DF is
Ex)
to
DIMEN...
~
~
Matrix: 0
/
y
button, it is changed
PANO: ON/OFF
~
Music: 0
C WIDT
DIMEN: -3
Dolby
Logic (Surround delay time):
Pro Logic: 15
30msec
Movie: 10
y
/
CWIDT:0~+7
II
Pro
to select a desired Sound mode.
/
2.4m
(DC)
/ 30cm
=
=
60cm
2msec
(A)
If
setting
is
complete, press
DELAY.
Before
PANO
Operation (Continued)
Test Tone
(PANORAMA)
This control extends the front stereo
image to include
the surround speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
elements in the mix, as these are detected and
tuated by the Panorama process.
accen-
This function allows you to can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode
1
TONE.
A hiss noise
speakers
C WIDT
(Center Width)
posileft/right
and the
speaker
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage presentation, and is recommended for most recordings. Step
"0" places all center sound in the center speaker. Step
"7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
(DIMENSION)
This control allows the
user
to
in the
gradually adjust
sound field either towards the front
or
the
rear.
the
This
can
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound for-
out for 2 seconds from each
→
→
→
2
...
adjust the sound level while the test
operating. First press LEVEL then press
can
tone is
the
/
buttons,
all the
speakers
position.
3
→
→
→
You
HOKUP
following order;
FR (Front Right)
C (Center)
(Front Left)
SR (Surround Right)
SL (Surround Left)
FL (Front Left)
SW (Subwoofer)
This control allows center-channel sounds to be
DIMEN
comes
FL
tioned between the center
by pressing TEST
?
During the
be paused
If
setting
so
is
that the sound level from
same
from the listener's
test tone, if you adjust the sound
in the current speaker channel.
level, it will
complete, press TEST TONE.
is
be useful to
ward, and steps --1, --2, and --3
towards the surrounds.
move
the sound
1
2
can
You
(Excellent
on
enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→XTSOFF...
XTS- 1:
the remote
/
to select a desired
Each time you press the
in the following order;
FL
C
/
Display Window.
speaker
XTS- 2:
to set.
high display
button, it is changed
FR
→
→
source
XTS- 3:
of sound at woofer
You
effect
via the
by playing the sound
rear speakers same as the
speakers.
operate both XTS-
can
1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
→
→
sense
for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the
front
→
playing the movie with the weak bass
relatively to the general music, it
enforces the
(Front Left)
(Center)
(Front Right)
SR (Surround Right)
SL (Surround Left)
FL (Front Left)
SW (Subwoofer)
→
When
sound
control.
The level indicator will appear in the
Press
Sound)
can
set the sound level of the desired channel.
Press LEVEL
True
Tips:
Sound Level
Yo u
XTS
...
woofer at the XTS- 2 mode.
3
Press
/
selected
adjust the sound level
channel. (-6dB
+6dB)
to
of the
~
2-3 and
Repeat step
4 the other channels.
adjust
the sound level of
Note:
The XTS- 2 mode is
from 2.1 CH to 5.1
temporarily disabled when changing
CH and it is enabled when changing it
to
2.1 CH.
5
If
setting
is
complete, press
LEVEL.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the
the following order.
XTS-PRO ON
→
setting changes
in
XTS-PRO OFF
21
Pre-operation Setup
Initial
In this
General
Settings
system, there
menu
several ways to cusMost menus consist of
Auto
are
tomize the
settings provided.
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu
system
be
will appear
on
the TV
label to
help
see
"B"
The third level
This DVD Recorder Receiver is
on
the
equipped
with
a
fre-
quency
synthesized
can
B. For
displayed by pressing
levels, you will
screen.
Programming
navigating the menu
right side of the menu
you go to the next level.
tuner
capable
of
receiving
up to 88 TV
channels.
Preparation:
Connect the DVD Recorder Receiver to the desired
type of aerial,
as
shown in
Connecting
to the Aerial on
page 13.
To
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
bring
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General
1
2
Operation
Press SETUP.
The
Setup
menu
1
appears.
Use v / V to select the desired
option.
While the desired item is selected, press B to
move to the second level.
3
4
5
6 press
Use v / V to select the second desired
Press B to
move to
option.
the third level.
setting
then
ENTER to confirm your selection.
Some items require additional steps.
7
The
Setup
menu
Setup
appears.
Use v / V to select the General
While the General
3
4 option.
5
6
move to
option
option.
is selected, press B to
the second level.
Use v / V to select the Auto
Press B to
Use v / V to select the desired
Press SETUP to exit the
2
Press SETUP.
move to
Programming
the third level.
"Start" icon is highlighted.
Press ENTER to
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
menu.
in
the tuner's memory.
Note :
After you have connected your DVD Recorder Receiver
for the very first time. If you press SETUP for initial set-
ting,
you
Then you
22
can
can
only
set the "Auto
set the other
Programming" option.
options.
Pre-operation Setup (Continued)
Program
Edit
You
a
can
move,
1
2
edit
Program
channel
manually (add, delete,
name,
nels
etc.).
Press SETUP.
The
Setup
menu
Use v / V to select the General
3
4 press
move to
option
Program
Program
option.
is selected, press B to
the second level.
Use v / V to select the
Edit
Program
option
then
a
search to select and store TV chan-
List
options
List
menu.
2. Use v / V to select
appears
'Program
on
List
Program
the left side of the
Edit'
option
from the
options then press ENTER.
Program Edit menu appears.
3.Useb/Btoselecttheitemandpressv/Vto
change the setting.
B to move to the third level.
"Edit" icon is
perform
manually.
can
1. Use v / V to select a program on the
menu then press ENTER.
appears.
While the General
You
Edit
highlighted.
[PR] indicates the selected programme position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
Press ENTER.
5 Program
6Usev/VtoselectaPRnumberthenpress
List
menu
appears.
ENTER.
Program List options
menu display.
7
Use v / V to select
appears
an
on
option
the left side of the
[Ch.] Changes
[MFT] Fine
picture.
the channel number.
tunes the channel to obtain a clearer
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
then press ENTER
to confirm.
Program
Edit: Edits the selected program.
Station Rename: Edits the station
Move: Moves the
program's
name.
location
on
the pro-
gram list.
Delete: Deletes the program from program list.
Nicam Auto/Off: Set the NICAM function to for the
program Auto
8
or
Press RETURN
List
Off.
(O) repeatedly
to exit
Program
menu.
23
SETUP
Pre-operation Setup (Continued)
Edit
Program
Sorting
(Continued)
You
Station Rename
You
can name
Names
independently.
can
be
long.
1. Use v / V to select a program on the
menu then press ENTER.
Program
Program
sort the
manually
program's position
on
the
List
options
List
menu.
appears
Program
List
the left side of the
on
1. Use v / V to select a program on the
menu then press ENTER.
Program
Program
Program List options then
Keyboard menu appears.
option
from
press ENTER.
List
options
List
menu.
appears
2. Use v / V to select 'Move'
options
2. Use v / V to select 'Station Rename'
on
option
can
a
from
a
desired
a
program
on
the
List
options
List
menu.
appears
2. Use v / V to select 'Delete'
options
for the station. Use vVbBto select
a character then press ENTER to confirm your selection.
a name
case
?
case
?
keyboard
upper
characters.
Alphabet Small: Switches
the
keyboard
to lower
characters.
Symbol: Switches
the
keyboard
to
symbol
char-
acters.
?
?
position
?
?
cursor
?
Inserts
a
position.
b / B: Moves cursor to left or
right.
Tip
Remote control buttons for
Numbers
ing
(0~9):Enters
location
on
entering
a name
the character of
correspond-
the selected column.
4. Choose 'OK' icon then press ENTER to fix the name
and returns to the Program List menu.
24
Setting
then press ENTER.
on
List
menu.
Program
List
the left side of the
option from Program List
The Program is deleted.
the NICAM Auto/Off
This DVD recorder
can
receive Hi-Fi sound transmis-
sions in NICAM Stereo. However, if sound distortion
occurs, due to poor reception, you can switch Off
1. Use v / V to select a program on the
menu then press ENTER.
Program
Program
List
options
List
menu.
appears
on
Program
List
the left side of the
option
from
then press ENTER. If you
select Auto, 'NICAM' appears on the menu screen
Program
menu.
space at the cursor position.
Delete: Deletes the previous character at the
Space:
List
then press
Program
2. Use v / V to select 'Nicam Auto/Off'
OK: Select to finish.
Cancel: Select to exit the
Program
program
delete
Program
Program
the
List
the left side of the
1. Use v / V to select a program on the
menu then press ENTER.
Alphabet Capital: Switches
Program
ENTER to store.
You
?
List
then press ENTER.
3. Use v / V to select
Deleting
3. Enter
Program
menu.
stations
up to 5 characters
can
TV channels
List
options
Pre-operation Setup (Continued)
Manual Clock Set
1
Display
Press SETUP.
The
Setup
menu
Display
2
3
4
5
While the General
6
the second level.
move to
(left/right):
option.
cursor
to the
previous
next column.
(up/down): Changes
cursor position.
the
setting
at the current
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
TV
Aspect Ratio
You
can
setting
works
only
when the TV
Aspect
can
choose:
picture with bands on the
upper and lower portions of the screen.
Scan: Automatically displays the wide picture on
the entire screen and cuts off the portions
Letter Box:
Pan
Displays
a
wide
that do not fit.
the third level.
Moves the
v / V
-
-
Enter the necessary information for date and
time.
or
-
is selected, press B to
option
Use v / V to select the Clock Set
b / B
7
You
menu.
-
Press B to
Mode
Ratio is set to "4:3".
appears.
Use v / V to select the General
move to
Mode
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set
Progressive Scan to [ON].
choose:
4:3:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
Caution
Once the
setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to [ON] in error, you must reset the recorder. First,
remove the disc in the recorder. Next, press STOP (x)
and hold it for five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a conventional analog TV or monitor.
25
SETUP
Pre-operation Setup (Continued)
PBC
Disc
The PBC
(PBC)
-
ON:
setting
can
be
changed. Set Playback Control
to ON or OFF.
Video CDs with PBC
are
played according
to the
for the disc's Menu, Audio, and
language
[Original]Refers
disc
OFF: Video CDs with PBC
as
a
Subtitle.
PBC.
-
Select
Language
are
played
the
same
way
Audio CDs.
was
to the
original language
in which the
recorded.
language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 57). If you enter the
wrong language code, press CLEAR.
[Other]
To select another
[Off](for
Disc
Subtitle)
:
Turn off Subtitle.
Factory Set
If you need to, you
can
reset the Recorder to all its fac-
tory settings. Select ''Set'' icon then press ENTER.
Audio
Note :
Some
Area
options
Code)
cannot be reset.
(Rating, Password,
and
Dolby Digital
[Bitstream]: Select "Bitstream" when enjoying original
Dolby Digital Audio (Set to this mode ordinary).
[PCM]: DVDs encoded in Dolby Digital will be automatically downmixed to two-channel PCM audio (refer
to Audio Channel Selection on page 35).
Language
DRC
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
Display Language
Select
a
display.
language
for the
(Dynamic Range Control)
Setup
menu
and
on-screen
possible,
thanks to
digital
audio
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
at a lower volume without losing clarity
DRC to [ON] for this effect.
26
listen to
a
movie
of sound. Set
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
your password, to clear the current password, follow the procedure below.
Set Password
Changing
the
code
forget your 4-digit
4-digit
code
forget
1. Press SETUP to
display
the
Setup
menu.
2. Use the Number buttons to enter the
number
6-digit
"210499".
3. Select "Ok" then press ENTER. The 4-digit
is cleared. Enter a new code as shown left.
password
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
1
certain
Press SETUP.
The
Setup
menu
2
3
4
5
6
While the Lock
move
option.
Ratings
is selected, press B to
to the second level.
option
Use v / V to select the Set Password
Press B to
move to
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
then correct it.
9
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
alternate
1
2
Follow steps 1-3
"Change"
The Parental Control
being played
played with
as
shown above to the left
(Set
Use v / V to select the
move to
Rating option.
the third level.
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/VbutOne (1)
playback
Follow
6
as
shown above to the left
has the least
tons.
Eight (8)
has the most
restrictions.
restrictions.
playback
No limit: If you select No limit, Parental Control is
not active. The disc will play in full.
a
Level 1 to 8: Some discs contain
scenes
not suit-
able for children. If you set a rating for the
Recorder, all disc scenes with the same rating
ENTER
played
4-digit password again and press
to verify when "OK" is highlighted.
played. Higher rated scenes
unless
an
alternate
disc. The alternate
Tip
ing
mistake before
to delete
rated
Password).
lower will be
repeatedly
to
scenes.
Enter the
a
scenes are
feature allows you to prevent discs from
by your children or to have certain discs
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER when "OK" is
highlighted.
If you
or
a
If you make a mistake before pressing ENTER, press b
repeatedly to delete password numbers one by one
8
country-dependent.
are
Press B to
Enter
the disc. These
disc
the third level.
If you have not entered
Enter a 4-digit password
While
complete
option.
Tip
7
scenes on
to the
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
appears.
Use v / V to select the Lock
applies
pressing ENTER, press b
password numbers one by one
or a
lower
one.
scene
If
no
scene
or
will not be
is available
on
the
must have the same rat-
suitable alternate
scene
is
found, playback will stop. You must enter the 4-digit
password
then correct it.
or
change
the
rating
level in order to
play
the disc.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
27
SETUP
Pre-operation Setup (Continued)
Area Code
DivX(R)
Enter the code of
a
country/area
used to rate the DVD video disc,
(See "Area Codes", page 57.).
whose standards
referring
were
to the list
VOD
DivX
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more informaWe
tion, visit www.divx.com/vod.
SG
1.
Select
2.
Press ENTER while
[DivX(R) VOD] option
then press B.
[Enter] is selected and the reg-
istration code will appear.
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Lock
3
4
5
6
While the Lock
move
option.
is selected, press B to
to the second level.
option
Use v / V to select the Area Code
3.
Use the
registration
videos from DivX
option.
code to
move to
the third level.
a
disc for
be
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
Tip
mistake before
to delete
pressing ENTER, press b
password numbers one by one
then correct it.
the v / V
7
Select the first character
8
Shift the
second
9
Press ENTER to confirm your area code selection, then press SETUP to exit the menu.
using
buttons.
28
using B buttons and select
character using v / V buttons.
cursor
on
this
Note:
tons to create a
repeatedly
playback
unit.
All the downloaded videos from DivX
a
rent the
www.divx.com/vod. Follow the instructions and
If you have not entered a password yet;
Enter a 4-digit password using the numbered but-
If you
or
VOD service at
download the video onto
Press B to
purchase
the
played
back
on
this unit.
VOD
can
only
Pre-operation Setup (Continued)
Recording
Auto
Record Mode Set
When
picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
10 minutes,
You
can
recording, chapter markers are put in at the
specified interval. You can set this interval to 5 minutes,
set the
Record
Chapter
es
or
automatic
15 minutes. If you select None, it switch-
chapter marking off,
no
separations.
SETUP
Aspect Ratio
When
recording,
you can set the recording aspect ratio
to suit the material you're recording (16:9 widescreen,
4:3
standard).
or
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
port.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
the other
is for
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
29
Pre-operation Setup (Continued)
Disc
Caution
If you want to change the disc format,
recorded on the disc will be erased.
Initialize
If you load a completely blank disc, the "Initialize"
will appear. Select "Ok" then press ENTER. The
everything
menu
Recorder will initialize the disc.
DVD-R: The Recorder initializes the disc for Video
Disc Protect
When
recording
in DVD+RW / +R disc
or
VR mode for-
mode.
matted DVD-RW disc, set to ON to prevent accidental
recording, editing or deleting of the disc loaded. If you
DVD-RW: The Recorder initializes the disc for VR
need to unlock the disc to make edits, select OFF.
mode. The
recording
mode will
always
be Video
mode.
DVD+R/ DVD+RW: The Recorder initializes the disc.
Also, you
can
format the disc from the
Setup
menu as
below.
1
2
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Disc
is selected, press B to
to the second level.
While the Disc
option
3
4
5 "Start"
highlighted.
6
DVD-RWs,
7 (DVD-VR DVD-VIDEO)
move
option.
Use v / V to select the Initialize
Press B to
move to
option.
the third level.
icon is
Press ENTER.
Initialize
menu
For
appears.
use b
/ B to select
a
mode
then press ENTER.
For DVD+RWs, go to step 8.
or
8
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
30
Pre-operation Setup (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
Use this to enter
MENU/LIST
or
TITLE.
a name
name
appears when you load the disc and when you
disc information on-screen.
?
?
The disc
display
be up to 32 characters long.
For discs formatted on a different DVD Recorder
name can
Receiver, you will
see
only
limited number of char-
a
acters.
Caution
After
for the disc. This
you've
finalized
DVD-RW,
or a
DVD+R
anything
else
on
a
disc
recording
on a
DVD-R,
disc, you can't edit or record
that disc except on a DVD+RW
disc.
Follow steps 1-3
1
1
Follow steps 1-3
as
shown
on
page 30
(Initialize).
2
3
4
Press B to
2
Use v / V to select the Disc Label
3
Press B to
move to
"Edit" icon is
move to
4 Keyboard
option.
on
page 30.
option.
the third level.
highlighted.
menu
appears.
the third level.
highlighted.
Press ENTER.
Finalize
menu
appears.
5
5
shown Initialize
Press ENTER.
Use v / V to select the Finalize
Finalize is
as
Select "Ok" then press ENTER.
The recorder starts finalizing the disc.
?
?
finalization takes
on
?
?
?
?
Tip
?
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
After
doing this,
you
can
edit and
character then press ENTER to confirm your
selection.
Alphabet Capital: Switches
case
the
keyboard
to
characters.
Alphabet Small: Switches
the
keyboard
to lower
characters.
Symbols: Switches
the
keyboard
to
symbol
char-
acters.
4 minutes or more to finalize.
menu.
for the disc. Use vVbBto select
a
case
the type of disc,
long
depends
how much is recorded on the disc, and the number of
titles on the disc. A heavily recorded disc can take up to
Finalize
a name
upper
Note :
How
Enter
OK: Select to finish.
Cancel: Select to exit the
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
?
re-
Inserts
menu.
a
position.
b / B: Moves cursor to left or
right.
record onto the disc.
6
Choose OK then press ENTER to
and return to the Setup menu.
7
Press SETUP to exit the
save
the
name
menu.
31
SETUP
Pre-operation Setup (Continued)
Overview for the On-Screen
Disc Information On-screen
Display
This manual gives basic instructions for operating the
DVD Recorder Receiver. Some DVDs require specific
allow only limited operation during playback. When this occurs, the symbol
appears on the
TV screen, indicating that the operation is not permitted
by the DVD Recorder Receiver or is not available on
the disc.
operation
can
loaded
display
various information about the disc
on-screen.
or
Displaying
Information While
While
viewing
display the
to
You
Display
Watching
the TV channels, press ENTER
information displayed on-screen.
1
2
TV
Press DISPLAY
information
To
received
by
the
the On-Screen
Display, press
DISPLAY repeatedly until it disappears.
See the descriptions on the following pages for
detailed explanations of displays as a disc is
playing.
remove
Recorder Status Icon
Indicates channel number, station
name, and audio signal (STEREO,
MONO)
repeatedly to display/change
displayed on-screen.
Resume
Action
the tuner.
play
Displays
from this
prohibited
or
point
not available
PR-06
STEREO
Notes :
ABC
Some discs may not provide all of the features on the
On-Screen Display, examples shown the below.
If
no
button is
Display
01/01/2005
will
pressed
disappear.
for 10 seconds, the On-Screen
13:35
Indicates current date and time.
DVD
Menu
VR
Video
+RW
+R
Function (Use v / V to select desired option)
Options
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
00:10:30
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numbers, ENTER
D
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/6
Number
4/26
Time Search
Audio
Language
(DVD only) and Digital
Audio Output Mode
Subtitle Language
Angle
ABC
Selection Method
Shows the current title number and total number of
titles, and skips to the desired title number.
Title Number
Chapter
DivX
2CH
OFF
1/3
Shows the current subtitles language, and
changes the setting.
b/B
b/B
Shows the current angle number, total number of
angles, and changes the angle number.
b/B
Function (Use v / V to select desired option)
Selection Method
VCD
Menu
Options
Track Number
1/6
Time
Audio Channel
32
00:10:30
Stereo
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numbers, ENTER
Shows the audio channel, and
changes the audio channel.
b/B
DVD and Video CD
DVD
or
Video CD
Operation
General Features
Playback
Playback Setup
Note :
nected to the DVD Recorder Receiver.
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
Audio
able
Turn the TV
the
on
and select the video
input
source con-
System: Turn the Audio System on and select
input source connected to the DVD Recorder
on
the
DVD
2
Press OPEN/CLOSE
(Z)
to open the disc
3 READING
appears
on
(Z)
start, press B
some cases,
If
the disc
menu
does not
playback
might
A
menu
is
loading
DVD
a
or
DVD
Use the bBvVbuttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE
or
MENU/LIST to return to the
menu
display.
Use the number buttons to select the track you want
to view.
Press RETURN
one
title, you
can move
to
follows:
title
on a
disc has
use v
/ V to select the title
more
than
one
chapter/track,
you
to another
(O)
to return to the menu
1.
Press SCAN
2.
Press SCAN
display.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions
on
each
Setup
3.
menu.
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
To exit SEARCH mode, press B
Still Picture and
Notes :
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
page 27).
DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this Recorder is 3 (three).
region
region code
2.
(PLAY).
Frame-by-Frame Playback
1. Press PAUSE/STEP
Rating settings (not authorized),
to select the
DVD, DivX; 4 steps (forward and backward)
Video CD; 3 steps (forward and backward)
menu screen.
You may also set PBC to OFF in the
See page 26.
--
as
than
Search
VCD
"Rating",
more
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
displayed
may be displayed first after
Video CD that contains a menu.
--
a
can move
Tip
a menu
disc has
CHAPTER/TRACK Selection
If
appear
instead.
If
PLAYBCK
+R
icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title number.
tray.
the display window, and
automatically.
(PLAY).
+RW
Press DISPLAY then
to close the
starts
playback
a
another title
Load your chosen disc in the tray, with the
playback side down.
Press OPEN/CLOSE
VR
Video
tray.
If
In
menu.
TITLE Selection
Receiver.
1
Setup
(X)
on
the remote control dur-
ing playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
To exit PAUSE mode, press B (PLAY).
a
for
33
DVD and Video CD
General Features
Operation (Continued)
Time Search
(Continued)
The Time Search function allows you to start
at any chosen time on the disc.
Slow Motion
1. Press PAUSE/STEP
(X) during playback.
1. Press DISPLAY
The Recorder will enter PAUSE mode.
2. Press SCAN
(m
M) during PAUSE
or
(m
or
to select the
M)
appears on the TV screen.
The Time Search box shows the elapsed
mode.
required
speed.
DVD; 4 steps (forward and backward)
DivX; 4 steps (forward only)
Video CD; 3 steps (forward only)
4. To exit Slow Motion mode, press B (PLAY).
2. Within 10 seconds, use v / V to select the Time
Search icon in the On-Screen Display.
The "--:--:--"
display
You
in
reverse
is not
possible
with
4
Repeat
DVD Discs
Press REPEAT to select
?
?
?
Off: does not
CDs,
chapter.
DVD
.
DivX
-
Repeat Track/All/Off
a
(DivX disc).
Off: does not play repeatedly.
1. Press ZOOM
Video CD with PBC, you must set PBC to OFF in
the Setup menu to use the Repeat function. See page
Each press of the ZOOM button
the sequence shown below.
A-B
sequence in
2. Press A-B
or
still
playback
x4 size
→
3. To
changes the
to acti-
TV
display
a
title:
screen.
at your chosen ending point.
icon and 'A-B' appears on the TV screen, and
begins.
3. To cancel the sequence, press A-B
select Off.
repeatedly
to
in
normal size
move
through
the
picture.
resume
normal
repeatedly
press CLEAR or press
until the normal picture appears.
playback,
The Zoom function may not work for
again
the repeat sequence
34
VCD
Note :
1. Press A-B at your chosen starting point.
Repeat icon and 'A-' appears on the TV
Repeat
→
zoomed
ZOOM
26.
a
+R
during playback
2. Use the bBvVbuttons to
a
To repeat
+RW
vate the Zoom function.
x2 size
Note :
Repeat
VR
Video
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
desired repeat mode.
Track: repeats the current track.
All: repeats the all tracks on the Video CD or in the
On
starts from the selected time on the disc.
Zoom
folder
?
Within 3 seconds, press ENTER to confirm the start
time.
play repeatedly.
Press REPEAT to select
?
desired repeat mode.
Chapter: repeats the current
Title: repeats the current title
Video
?
a
in the box.
not enter an invalid time.
can
Playback
Repeat Chapter/Title/Off
right
If you enter the wrong numbers, press CLEAR. Then
enter the correct numbers.
Video CDs.
-
appears in the Time Search box.
3. Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
Note :
playback
playing
time of the current disc.
seconds from left to
Slow motion
The On-Screen
during playback.
Display
The DVD Recorder Receiver will enter SLOW mode.
3. Use the SCAN
playback
some
DVDs.
DVD and Video CD
General Features
Operation (Continued)
(Continued)
Camera
Marker Search
You
nine
can
points
To enter
1.
start
playback
from
memorized
a
point. Up
to
be memorized.
can
If the disc contains sequences recorded from different
camera angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
wish.
mark, follow these steps.
a
1. Press DISPLAY
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
on
the TV
briefly.
points
Display.
3. Use b / B to select the desired
on a
The number of the current
disc.
angle.
angle appears
on
the TV
screen.
To Recall
1.
The On-Screen
appears on the TV screen.
2. Use v / V to select the Angle icon in the On-Screen
screen
1 to enter up to nine Marker
Repeat step
during playback.
Display
memorize.
2.
Angle
DVD
During
or
Clear
disc
Marked Scene
a
playback,
The Marker Search
Changing
press SEARCH.
menu
will appear
on
the TV
2. Within 10 seconds, use b / B to select the marker
number that you want to recall or clear.
scene.
playback
starts from the marked
Or, Press CLEAR and the marker number is
erased from the list.
4. You can
any marker
the marker search menu.
play
by inputting
its number
on
audio soundtrack if available.
Audio Channel Selection
the Contents of DVD Video
Discs: Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
to select an
highlight
the bBvVbuttons to
your selection, then press ENTER.
option. Or,
use
+RW
+R
VCD
Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (STEREO, LEFT
RIGHT).
With DVD-RW discs recorded in VR mode that have
both
Bilingual audio channel, you can
switch among Main (L), Sub (R), Main+sub (L+R), or
Mono by pressing AUDIO.
a
main and
a
Note :
The Audio Channel Selection will operate when the
Dolby Digital is set to PCM mode in the Setup menu
(refer
Title Menu
VR
Video
or
Reviewing
DVD
Press AUDIO then press b / B repeatedly during playback to hear a different audio language (DVD only) or
screen.
3. Press ENTER and
the Audio Soundtrack
to "Audio" on page
26).
DVD
1. Press TITLE.
If the current title has
on
the TV
a menu,
the
menu
Otherwise, the disc
screen.
will appear
menu
may
appear.
2. The
may contain camera
guage and subtitle options, and
menu
Disc Menu
angles, spoken lanchapters for the title.
DVD
1. Press MENU/LIST.
The disc
2. To
menu
remove
is
displayed.
the disc menu, press MENU/LIST
again.
35
PLAYBCK
DVD and Video CD
Subtitles
DVD
Operation (Continued)
PIP
DivX
DVD
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
VR
+RW
Each press INSTANT SKIP
skips
+R
VR
Video
+RW
+R
VCD
This function enables you to view the stored stations in
the sub picture during playback.
Skip
Video
(Picture-in-Picture)
VCD
forward 15 seconds.
Note :
If
appears, the feature is not available
Last Condition
Memory
This Recorder memorizes the
user
on
the disc.
DVD
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
--
--
Input
stored in memory for use any time.
This Recorder does not memorize settings for a disc
Settings
Press PIP to switch
again
Notes :
are
if you switch off the Recorder before
play the disc.
commencing
to
PIP On and Off
Turning
on
the sub
picture,
press PIP
to switch it off.
source
selection for sub
picture
Press AV to select the
input source for the sub
picture. Each time AV is pressed, each input source
available for the sub picture is displayed as shown
below.
Tuner→AV1→OPT→AV2→DV
Program
Use PR
selection for sub
(v
/
picture
the program if sub picture's
is Tuner. The selected program number
V)
input source
is displayed on
to
change
the TV
selected program
Sub
You
display
by pressing STOP (x).
screen.
can
picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
36
the
Playing
a
DivX Movie Disc
this DVD Recorder Receiver you can play back
DivX files on the CD-R/RW or DVD±R/RW. Before play-
Using
ing DivX files,
right.
read "About DivX movie files"
on
Press SETUP. The
2.
Press
the
select
Setup menu appears.
SETUP b [LANGUAGE] b [Disc Subtitle]
the language you have found.
Refer to "Disc Menu/Audio/Subtitle"
on
then
page 26.
Tip:
disc and close the tray. The MOVIE
appears on the TV screen.
Insert
1
a
menu
If the subtitle still does not
display properly
after the
proceeded, press and hold SUBTITLE about
3 seconds during playback.
The new language code number selected is displayed
on upper-right of the TV screen.
steps
1-2
code
Language
change sequency
for
Hungarian,
Czech and Polish:
LANGUAGE 1
code
Language
LANGUAGE 1
Press v / V to select
2
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use
v / V buttons on the remote to
and
highlight
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
DivX disc
as
Tip:
?
(MP3/WMA, JPEG,
a
you can select menu screen. Press
word on top on the menu is highlighted.
/ B to select MP3/WMA,
Then,
MOVIE then press ENTER.
use b
You
can
view TV channel
pressing
RETURN
or
video
JPEG,
source
by
?
?
menu, press MENU/LIST.
Notice for
displaying
title does not
Find
a
subtitle
the DivX subtitle
following
display properly.
suitable Disc Subtitle
on
the
Disc Subtitle
figure
language
If there is
?
below.
Language
Available DivX Subtitle
Original, English
English
French, German,
Italian, Spanish,
French, German, Italian,
Spanish, Portuguese
Portuguese
Dutch, Swedish
Russian
Russian
Other 6976
Greek
Other 7665
Polish, Hungarian, Czech
Other 8482
Turkish
H) pixel.
of the DivX subtitle is available
impossible code
displayed as
by
47
to express in the DivX
"
_
If the number of the
screen
"
mark
the
on
frame is
over
file,
display.
30 per 1
If the video and audio structure of recorded file is not
?
?
or
audio is
outputted.
This recorder does not support GMC.
Playable
DivX file: ".avi", ".divx"
Playable DivX subtitle: ".smi", ".srt",
".sub (Micro DVD, Subviewer 1-2 format only)",
".txt (Micro DVD, T1-4 format only)"
played
?
for the DivX
x
name
Divx subtitle
notice when the DivX sub-
Please refer to
1.
The file
(W
interleaved, either video
or
If you want to return to the
(O).
?
?
input
with this recorder is limited
second, this unit may not operate normally.
files),
TITLE and
LANGUAGE 3
characters.
?
and DivX
b
for Russian:
follows:
it may be
disc with mixed content
LANGUAGE 2
compatibility
720x576
?
a
change sequency
About DivX movie files
Press STOP to exit.
On
b
LANGUAGE 2
?Available resolution size of the DivX file is under
press ENTER.
3
4
b
on
except those listed above is
the TV
not dis-
screen.
Playable Codec
format: "DIVX3.xx", "DIVX4.xx",
"DIVX5.xx", "XVID ", "3IVX".
Playable Audio format: "Dolby Digital", "PCM", "MP3",
"DTS (DIGITAL OUT only)"
Sampling frequency:
Bit rate: within 32
-
within 8
-
48 kHz
(MP3)
320kbps (MP3)
37
PLAYBCK
Audio CD and MP3/WMA
Playing
file
an
CD
Audio CD
MP3
or
Operation
MP3/WMA
Notes
WMA
on
MP3/WMA
MP3 / WMA disc
this DVD Recorder Receiver you can play back
MP3/WMA files on the CD-R/RW or DVD±R/RW. Before
Using
playing MP3/WMA files, read
Recordings" on the right.
"Notes
on
ited
?
MP3/WMA
as
Recordings
compatibility
with this
player
is lim-
follows:
within 32
48 kHz (MP3),
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
32
192kbps (WMA)
-
within
-
?
-
-
Audio CD
?
The recorder cannot read
file extension other than
a
Once you insert an audio CD
screen. Press v / V to select
B
(PLAY)
or
ENTER and
appears on TV
track then press
a menu
a
playback
?
?
starts.
CD-R
physical
MP3/WMA file that has
an
".mp3"
/ ".wma".
format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible
mend that
playback MP3 / WMA files. We recomyou use Easy-CD Creator, which creates
to
ISO 9660 file system.
File names should have a maximum of 8 letters and
an
?
must
?
They
incorporate
should not
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*
:
"<>letc.
?
The total number of files
the disc should be less
on
than 999.
This DVD Recorder Receiver
ings
Press v / V to select
see
2.
discs and record-
to meet certain technical standards in order to
achieve
MP3 / WMA
1.
requires
a
folder, and press ENTER to
the folder contents.
Press v / V to select a track then press B
ENTER. Playback starts.
(PLAY)
or
optimal playback quality. Pre-recorded DVDs
are automatically set to these standards. There are
many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these
require compatible playback.
Customers should note that
permission
is
required
in order to download MP3 / WMA files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
Tips
If you
are
in
a
file list and want to return to the
Folder list, use the v/V to highlight
ENTER to return to the previous menu
and press
screen.
Pressandholdv/Vtogotothenext/previous
page.
On a disc with mixed content
and DivX
(MP3/WMA, JPEG,
you can select menu screen. Press
word on top on the menu is highlighted.
files),
TITLE and
a
/ B to select MP3/WMA, JPEG, or DivX
then press ENTER.
You can view TV channel or video input source by
Then,
use b
pressing
RETURN
(O).
menu, press MENU/LIST.
38
If you want to return to the
sought
from the
copyright
owner.
Audio CD and MP3/WMA
Pause
CD
MP3
1. Press PAUSE/STEP
Operation (Continued)
WMA
Repeat
To repeat
(X) during playback.
2. To return to
playback, press
PAUSE/STEP (X) again.
N
(PLAY)
or
press
A-B
a
sequence in
Track Selection
Press SKIP .
>
or
MP3
The
WMA
playback to go to the next track or to return to the
beginning of the current track.
Press SKIP . twice
briefly
to
step back
to the pre-
a
again at your
Repeat icon and 'A
screen, and the
briefly during
MP3
WMA
track:
1. Press A-B at your chosen starting point.
Repeat icon and 'A' appears on the menu
2. Press A-B
CD
CD
chosen
-
ending point.
B' appears
on
the
Repeat
icon
menu
repeat sequence begins.
3. To exit the sequence and return to normal
A-B again.
The
screen.
disappears
from the
play,
press
menu screen.
vious track.
On
Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) duran
ing playback
on
the Track List.
Repeat Track/All/Off
CD
MP3
WMA
Press REPEAT to select
?
?
?
desired repeat mode.
TRACK: repeats the current track.
ALL : repeats the all tracks on the disc.
OFF
(No display):
Search
a
does not
play repeatedly.
CD
1. Press SCAN
(m
or
M) during playback.
The Recorder will enter SEARCH mode.
2. Press SCAN
(m
or
M)
to select the
required
(backward) or MX2,
speed: mX2, mX4, mX8
MX4, MX8 (forward).
Search speed and direction are
indicated
on
the
menu
display.
3. To exit SEARCH mode, press B
(PLAY).
39
PLAYBCK
Audio CD and MP3/WMA
Operation (Continued)
Repeat Programmed
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the recorder's memory. A program can contain 99 tracks (Audio CD) or 256 tracks
(MP3/WMA).
1.
Insert
a
You
1.
2.
2.
3.
Select
Select
a
"
MP3/WMA
track
on
appears.
?
the List.
You
can
""
playing
a
disc. The repeat icon
a
desired repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
If you press SKIP (>) once during
back, the repeat playback cancels.
Erasing
add all tracks in the disc. Select
1.
icon then press ENTER.
previous
disc.
Repeat
Track
page.
2.
a
Track from
Program
List
Use vVbBto select the track that you wish to
erase from the Program list.
"
"
Press CLEAR. Or, select
icon then press
ENTER to erase the selected track on the Program
list.
Repeat
Erasing
Select
"
the
to erase additional tracks on the list.
Complete Program
List
", then press ENTER. The complete Program
for the disc is erased.
Note:
The programs
removed.
Example)
5.
Audio CD
Press B (PLAY) or ENTER to start. Playback begins
in the order in which you programmed the tracks.
Playback stops after all
list have played once.
40
play-
the list.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
next /
on a
Note :
icon then press ENTER to place the
selected track on the Program list. Repeat to place
on
track/all
Press REPEAT to select
?
"
additional tracks
4.
menu
a
Press REPEAT when
?
Audio CD and MP3/WMA Discs:
or
play
appears.
disc.
Audio CD
can
Tracks
of the tracks
on
the
Program
are
also cleared when the disc is
JPEG File
Viewing
a
Operation
Notes
JPEG file
Using this DVD Recorder Receiver you can view JPEG
files on the CD-R/RW or DVD±R/RW. Before playing
JPEG files, read "Notes
on
JPEG
Recordings"
on
?
JPEG
on
upon the size and number of JPEG files, it
could take a long time for the DVD Recorder Receiver
Depending
to read the disc's contents. If you don't see an on-
the
display after
be too large
screen
right.
disc and close the tray. The JPEG
appears on the TV screen.
Insert
a
several minutes, some of the files
reduce the resolution of the
may
JPEG files to less than 5M
---
1.
Recordings
menu
pixels
as
2760
x
2048
pix-
els and burn another disc.
?
The total number of files and folders
on
the disc
should be less than 999.
?
?
Some discs may be incompatible due to
recording format or the condition of disc.
Ensure that all the selected files have the
sions when
?
2.
Press v / V to select a folder, then press ENTER. A
list of files in the folder appears. If you are in a file
list and want to return to the
the v / V buttons on the
then press ENTER.
3.
previous Folder list,
remote to highlight
If you want to view a particular file, press
v / V to highlight a file then press ENTER
B
(PLAY).
The selected
image
is
copying
into the CD
different
".jpg"
exten-
layout.
If the files have
rename
?
a
File
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
names
".jpg"
extension will not be able to
this DVD Recorder Receiver. Even
be read
by
the files
are
shown
as
JPEG
image
though
files in Windows
Explorer.
use
or
displayed
in full
screen.
Press ENTER to appear
4.
or
disappear
this
menu.
To stop viewing at any time, press STOP.
The menu screen appears.
Tip:
?
?
If you
in
file list and want to return to the Folder
and press ENTER to
list, use the v/V to highlight
return to the previous menu screen.
are
a
Pressandholdv/Vtogotothenext/previous
page.
?
On
disc with mixed content (MP3/WMA, JPEG, and
DivX files), you can select menu screen. Press TITLE
and a word on top on the menu is highlighted. Then,
use b / B to select MP3/WMA, JPEG, or DivX then
press ENTER.
?You
a
view TV channel or video input source by
pressing RETURN (O). If you want to return to the
menu, press MENU/LIST.
can
41
PLAYBCK
JPEG File
Slide Show
Use v V b B to
Operation (Continued)
To listen to music while slide show
JPEG
the
(Slide Show) on the
JPEG menu then press ENTER.
Slide Show starts from the selected file if Speed option
is not II
There
>>
are
viewing a file, you can press STOP
previous menu (JPEG menu).
While
(Off).
to move to the
?
highlight
four Slide
(Normal),
>
Speed options (
(Slow) and II (Off).
Use v V b B to
Then,
use b
highlight
the
/ B to select the
)
: >>>
Speed options (
option you want
(Fast),
).
to use
then press ENTER.
Still Picture
1.
JPEG
Press PAUSE/STEP
The recorder will
2.
during
slide show.
go into PAUSE mode.
now
To return to the slide show, press N
press PAUSE/STEP again.
Moving
to another File
cursor
viewing
to the next
a
To rotate
Press v / V
picture
or
JPEG
Press SKIP
(. or >) or
picture to advance
(PLAY)
(b
B) once while
or previous file.
or
JPEG
during showing
a
picture
to rotate the
pic-
ture clockwise or counter clockwise.
Zoom
JPEG
Use ZOOM to
42
enlarge
the
photo image. (see
34
page)
simultaneously
You
can
display photo
music files recorded
Select
JPEG
files while
on a
listening
to MP3/WMA
disc.
icon then press ENTER
on
the JPEG
menu.
Basic
Basic
Recording
from TV channels
Recording
Recording
starts
disc is full
or
Switch
1
a
easily
immediately
you stop the recording.
on
the recorder and load
Also make
a
recordable disc.
input source is set to
completely blank disc,
this recorder. If you load a
the recorder takes a short while to initialize the disc.
2
3
Set
(+/-)
Follow steps 1-4 as shown left
from a TV channels).
can
(z) repeatedly to select the recording time length.
Recording starts after the first press. Each
additional press increases the recording time by
At the end of the
the DVD Recorder
Receiver will
and shut off.
recording,
stop recording
TV Audio Channel
select the audio channel
or mono
Bilingual
(Basic Recording
Press REC
record.
Stereo
TV program. The
by
cur-
on-screen.
broadcast: Stereo
broadcast: Main+Sub
to listen
(language)
→
Left
Main
→
Right
→
Instant Timer
Sub
→
If the sound is of poor quality when set to
can often improve it by changing to Mono
Stereo, you
(Left
or
This recorder
record either NICAM
can
audio. If the NICAM
or
Checking
Press REC
Right).
?
a
allows you to make a recording
without using the program
10 minutes within the available free space.
The recording time is displayed on the TV screen.
buttons to select the TV channel to
pressing AUDIO during viewing
rent audio channel is displayed
?
2
recording mode as necessary by pressing
REC MODE repeatedly. (HQ, SQ, LQ, EQ)
HQ; High Quality, SQ; Standard Quality,
LQ: Low Quality, EQ: Extended Quality
Changing
You
1
a
Use PR
of
Recording
preset length
timer.
that the TV's
sure
Recording
Instant Timer
TV program.
and continues until the
Follow the instructions below to record
Instant Timer
remaining
regular
the
(z)
Recording
Menu
Recording
Time
to check the
recording
once
time will be
displayed
on
the TV
time. The
screen
for
a
moment.
is set to Auto,
then if the broadcast is NICAM, the audio automatically changes to NICAM and you can record the
setting (page 23)
To Extend the
The
recording
ing REC (z).
NICAM audio. If the broadcast is non-NICAM, the
regular audio is always recorded.
time
Recording
can
be extended
Time
anytime by
press-
Each additional press increases the recording time
10 minutes within the available free space.
If NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
by
program.
Press REC
4 Recording
(z)
Caution
once.
will start.
(The
REC indicator
lights
in the
If the Recorder is
while the
display window.)
Recording continues
until you press STOP
(x)
or
unplugged (or there is a power failure)
Recorder is recording, the recording will be
lost.
the disc is full.
To record for
Timer
5
a
fixed
Recording
Press STOP
(x)
To Pause the
on
to
length
right.
of time,
see
Instant
stop recording.
Recording
1. Press PAUSE/STEP
(X)
to pause the disc
during
recording.
2. When you want to continue
PAUSE/STEP
recording,
press
(X).
43
RECODING
Timer
Recording
This DVD Recorder Receiver
be
programmed
period of 1 month.
can
to
record up to 7 programs over a
For
unattended recording, the timer needs to be set with the
channels to be recorded, the
starting
time and
Enter the necessary information for your timer
2 recording(s).
?
length.
?
Note:
?
If you use a completely blank disc for timer recording,
you must format the disc before starting timer recording.
(Refer
to "Initialize" on page
?
30.)
menu
SQ
119Min Free
PR
Date
Start Time
End Time
Mode
Repeat
4
2/3 Sun
19:20
19:50
SQ
Once
Timer Rec List
TIMER REC
Press ENTER after
filling
Press TIMER REC to
PR
one
?
?
?
?
Choose
3
To check the
programming,
will appear.
Check field's "Rec. OK"
Close
memorized program number, or
of the external inputs from which to record.
--
Date
--
Start Time
End Time
Mode
EQ,
AT
--
--
--
correctly
a
Choose
a
date up to 1 month in advance.
Set the
Set the
Choose
AT).
(Auto) mode
a
display
Timer Record List.
Press ENTER, the program will be memorized
by the DVD Recorder Receiver.
indicates that the timer
?
in all the program infor-
will appear.
Timer Record
OK
--
mation.
Press TIMER REC.
The Timer Record
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
menu.
?
1
b / B
recording starting
recording ending
record mode
(HQ, SQ, LQ,
or
determines how much disc time
is available and switches record mode, if
sary, to complete recording the program.
the Timer Record List
recording
is
programmed
recordable disc is inserted.
a
4
Press RETURN
5
Make
time.
time.
and
on
the Timer Record List
(O)
to exit the
Program
List.
that you load a recordable disc and
press POWER to switch your unit to Standby.
sure
Notes :
?
neces-
lights in
standby with
window if the
The timer indicator
the
Recorder is in
the timer active.
display
?You must press POWER to stop the timer recording.
There is a short delay when a timer recording finishes to
?
?
Repeat Choose a desired repeat (Once, Daily
(Monday Friday), or Weekly).
--
-
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very
44
beginning of
the later program may not be recorded.
Timer
Recording (Continued)
Timer
Reviewing
Programming
Details
Recording
Timer
be checked whenever the DVD
can
Recorder Receiver is turned
on.
Even
Press TIMER REC
?
?
Use v / V to select
timer
a
?
Press ENTER to edit the selected program.
Timer Record menu appears.
Press CLEAR to
remove
?
Timer Record List
Date
Start Time
Length
Mode
Check
10:20
60
LQ
Rec. OK
51
25/7 (Su)
1:20
50
HQ
Rec. OK
5
17/7
(Sa)
There is
no
disc loaded.
Disc Protect is set to ON in the
page 30).
Power is turned
Setup
menu
(see
the selected program
from the Timer Record List.
PR
the timer is set, the Recorder will not
?Anon-recordable disc is loaded.
recording.
?
?
though
record when:
twice.
?
Recording Troubleshooting
There
on.
already 99 titles (DVD-R/RW),
(DVD+R/RW) recorded on the disc.
are
You cannot enter program for a timer
?Arecording is already underway.
?
?
49 titles
recording
if:
The time
There
you're trying to set has already passed.
are already 7 timer programs set.
If two or more timer programs overlap:
The earlier program takes priority.
?
Edit
CLEAR
Delete
TIMER REC
Timer Rec
Close
?
After the earlier program finishes, the later program
starts.
?
Canceling
You
can
clear
ing actually
?
a
a
Timer
timer
Recording
setting anytime
before the record-
starts.
Use v / V to select
program you want to remove
the Timer Recorder List. If you want to remove the
a
program, press CLEAR.
The confirm message will appear.
"Ok" then press ENTER.
Timer
Stopping
a
After
recording
a
timer
use
Recording
has started, you
If two programs are set to start at exactly the
time, the program entered first takes priority.
same
If the disc is
damaged, the recording may not be completed successfully. In this case even though the Check
field shows "Rec. OK", it may not be.
on
b/B to select
in
Progress
can
still cancel
the program.
Press POWER.
?
45
RECODING
from
Recording
can
external
1
or
Input Source
Components
external A/V device, such as a
VCR, connected to any of the Recorder's
record from
camcorder
External
from External
Recording
You
an
an
inputs.
Make
that the component you want to
record from is connected properly to the DVD
sure
Recording
You
can
from
record from
a
digital camcorder connected
front panel of this Recorder.
a
the DV IN port on the
Using the Recorder's remote, you
Camcorder and this Recorder.
Before
DV IN
make
recording,
port is
set up
source
signal
Camcorder
Digital
sure
(see
control both the
can
that the audio
page
to
input
for the
29).
Recorder Receiver. See pages 14-15.
2
Press AV
to select the external
repeatedly
input
Tips
to record from.
?
?T uner: Built-in tuner
?
?AV1: AUDIO IN 1 / VIDEO IN 1 mounted
on
?AV2: AUDIO IN 2 / VIDEO IN 2 mounted
on
?D V: DV IN mounted
Note :
AV3
Opt
on
front
back
panel
front panel
panel
The
must be DVC-SD format.
Some camcorders cannot be controlled
Recorder's remote.
?
If you connect a second DVD Recorder Receiver using a
DV cable, you cannot control the second DVD from this
one.
will not be recorded.
?You can't control this unit
Load
a
3
Select
recording
necessary by
4 pressing REC MODE repeatedly.
mode
1
2
EQ: Extended Quality
5 Recording
once.
will start.
Recording
6
a
on
Press STOP
fixed
(The REC
indicator
until you press STOP
length
lights
in the
(x)
or
to
sure
Check that the DV audio
You
?
the
of time,
see
Instant Timer
page 43.
(x)
DV
input
choose between Audio 1
can
is
as
you
require.
(original audio) and
Audio 2
stop recording.
(over-dubbed audio).
DV Input is set from the DV Rec Audio in sub-menu of
the Setup menu. See DV Rec Audio on page 29 for
more
disc is full.
To record for
a
your Digital Camcorder is connected
to the front panel DV IN port. See page 15.
Make
display window.)
Recording continues
component
a
as
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
(z)
from
cassette.
(HQ, SQ, LQ, EQ)
Press REC
remotely
connected to the DV IN port.
?You can't record date and time information from
recordable disc.
the
this
using
information.
3
Press AV
4
Find the
repeatedly
DV appears in the
want to
display window and
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
9 for more details.
?
on
input.
the TV
place on the Camcorder tape
the recording to start from.
For best results, pause
you want to record.
Note :
to select the DV
Depending
on
your
playback
at the
Camcorder, you
that you
point from which
can use
Recorder's remote to control the Camcorder
STOP,
5
screen.
this
using the
PLAY and PAUSE functions.
Press REC
(z)
once to start
recording.
automatically stopped if the
Recorder detects no signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
is
control the Camcorder from this Remote Control
during recording.
?
In Video mode, the final frame of the
may remain
?
46
displayed
on screen
for
recording
a
while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
Recording
from
an
Input Source (Continued)
External
DV-Related
What is DV?
You
camcorder to this
connect a
DV-equipped
recorder using a single DV cable for input and output of
audio, video, data and control signals.
This Recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuner, PCs,
and D-VHS Video Recorders are not compatible.
can
?
?You cannot connect
a
than
more
one
You may see the following messages appear
TV screen when using the DV IN port.
on
your
Not connected to Camcorder
The Camcorder is not connected
properly,
or
the
Camcorder is switched off.
DV camcorder at
time to this Recorder.
?You cannot control this Recorder from external
ment connected via the DV IN
Messages
equip-
two
port (including
Too many devices connected
The DV IN port on this Recorder supports connection to
just one Camcorder.
DVD
?
?
It
Recorders).
may not be possible
to
always
control the connect-
ed Camcorder via the DV IN port.
Digital Camcorders can usually record audio
stereo
16-bit/48kHz,
or
Check the tape
There is no cassette loaded into the connected
equip-
ment.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
can
only
record
audio track. Set DV Rec Audio to Audio 1
one
or
stereo
Audio 2
required (see page 29).
Audio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
?P icture disturbance on the recording may occur if the
source component pauses playback or plays an
Uncontrollable device
This Recorder cannot control the Camcorder.
as
?
?
Updating
Information
Camcorder is
information for DV.
updating
Camera mode
unrecorded section of tape, or if the power fails in the
source component, or the DV cable becomes discon-
Camcorder is set to
nected.
Troubleshooting
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
camera
mode.
2
If you can't get a picture and/or audio
port, check the bullet points:
?M ake
sure
through
the DV IN
the DV cable is
?T ry
properly connected.
connected equipment then
switching off the
switching back on.
?T ry switching the audio input.
Note :
the connected Camcorder, you may not
be able to control it using the Remote Control supplied
Depending
on
with this Recorder.
47
RECODING
Title List and
List Menu Overview
Chapter
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD, and
whether you're editing Original content, or a Playlist.
123
45
67
two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc, or
There
you
are
can
create and edit a
Playlist.
The
Playlist
doesn't
any of the content on the disc, but
controls how the content is played back.
actually change
just
Press MENU/LIST to
1.
Playback
should be
display the Title List menu.
stopped when you do this.
When
selecting titles, use the
play the previous/next page if
v / V buttons to dis-
there
are more
than
six titles.
If you
VR mode disc, press
MENU/LIST to switch between Original and
are
Playlist
editing
a
menu.
On the left side of the
screen are
the
menu
options.
1.
options: To display menu option, select a title
or chapter then press ENTER. The options displayed differ depending on the disc type.
[Chapter] Displays Chapter List of the title.
[Combine] Combines two chapters into one (page
52).
[Delete] Deletes the title or chapter. (page 51)
[Delete Part] Deletes a part of the Title (page 51).
[Divide] Divides a title into two (page 54).
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title
or chapter. (page 54)
[Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu.
(page 53)
[Play] Start playback of the selected title or chapter. The hidden titles and chapters on the
DVD+R/RW cannot be play back.
[Playlist Add] Adds the title or chapter to the
Playlist. (page 50)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 53)
[Title Name] Edits the title name. (page 52)
[Title] Displays Title List of the chapter.
2.
Indicates the record mode, free space, and
time progress bar.
3.
Current media
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number of
The
main part of the screen shows thumbnails of the titles
(or chapter) on the DVD. You can change these thumbnails
using
the THUMBNAIL button---see
Thumbnails
on
on
Title
page 49.
Press DISPLAY to
title
Changing
display
the Title List
the information of selected
menu.
After
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use v /
to select a option then press ENTER to confirm your
V
selection.
2.
To exit the Title List menu, press RETURN
(O)
repeatedly.
Menu
elapsed
selected title.
titles.
7.
Shows the title name, recorded date, and
length.
48
recording
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
or
chapter
that title
from the
Original
content
Chapter),
disc, freeing up
(Title
or
chapter is deleted from the
extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the Recorder not to play that title; nothing is actually deleted from the disc.
or
Titles, Chapters,
Titles in the disc's
and Parts
VR
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu, you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Caution
?
When
the Delete, Add, or Move functions, the start and end frames may not be exactly
set in the starting and ending points display.
?D uring
+RW
+R
chapter marker anywhere in a Playlist or
Original title during playback.
Once the chapter is marked, you can use the Chapter
You
put
can
a
Search feature, as well as delete, combine and move
chapters in the Chapter List-Original or Chapter List-
Playlist
menu.
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 29).
1
the title
Play
At the
2 press CHP
A
as
you may notice a momentary pause between edits. This is not a malfunction.
(Original
point you
or
Playlist).
want to start a new
chapter,
ADD.
marker icon appears on the TV screen.
can also put chapter markers in while record-
chapter
?You
ing.
Changing
editing using
Playlist playback,
VR
Markers
Note :
content contain one or more
original
Adding Chapter
VR
Title Thumbnails
+RW
+R
displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
Each title
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose appears
Original or Playlist menu.
in both the
Tip
You
change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
can
also
49
EDITNG
Title and
Making
a
Chapter Editing (Continued)
New
Playlist
Use this function to add
an
VR
Original
title
or
to
chapter
the
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting a Title/Chapter on page 51).
Adding Additional Title/Chapters
VR
Playlist
You
can
add
---
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
Choose
Original
an
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
You
can
.
title/chapter
to the
Choose
Playlist
or
chapter
Playlist, then press ENTER.
Original menu options appear on the
to
Playlist
title
put into
left side of the
screen.
2 options
'Playlist'
from
Original
menu
then press ENTER.
this page.
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
title
on
only
title
to a
the
Use v / V to select
title.
1
if it is
Original title or chapter
already registered.
an
to the
or
Use v / V to select
2 options then press
'Playlist'
from
Original
ENTER.
3
Choose
a
Title
tered to insert
List-Playlist that is already regisa title or chapter, then press
ENTER.
The title
or
chapter
appears in the
updated Playlist
menu.
3
Select 'New
The
new
chapters
50
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist'
4
Repeat steps 1-3 to
ter on the Playlist.
5
Press RETURN
back to the
add additional title
chap-
or
(O) to exit, or MENU/LIST
Title List-Original menu.
to go
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
+R
Deleting
Video
You
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
Original
menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
1
2
3
a
delete
can
VR
Part
part which you do
a
not want in the title.
Press MENU/LIST
Title
repeatedly to display
List-Original or Title List-Playlist menu.
Use vVbBto choose
a
title you want to
delete then press ENTER.
The options appears on the left side of the
Select 'Delete Part' from the
options
on
menu.
the
menu.
Note :
It may not be possible to delete
than 5 seconds long.
1
On the Title List
bBto choose
a
chapters
Chapter
chapter or
or
that
List menu, use vV
title you want to
delete then press ENTER.
Options appears on the left side of the
2
Select 'Delete' from the
less
are
options
on
screen.
the
menu.
Press ENTER.
4 Title Edit (Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
Press ENTER to confirm.
3
The confirm message for
4
Use b / B to select 'Ok' then press ENTER.
The selected chapter or title is deleted.
After
pressing ENTER,
displayed.
5
6
Repeat steps
1
-
deleting
the new,
will appear.
updated
menu
Starts
is
6 you
4 to continue to delete from the
(O) repeatedly
to exit the
more
titles
?
recording,
name
is
are
combined into
repeatedly
You
When you are deleting a title or chapter, only the last
one on DVD+RW increases remaining recording time.
of the section
Bar.
ending point
of the section
want to delete.
can
cancel the selected
point,
use v
/ V to
select 'Cancel' icon then press ENTER.
deleted, the
one.
starting point
Use pause step, search and slow-motion to find
the ending point.
8 you
to 'Deleted Title'.
than two titles
are
the deleted title's
starting point.
highlighted.
indicated on the Progress
Press ENTER at the
When DVD+RW
If
to find the
pause step, search and
'End Point' icon is
7
menu.
use
want to delete.
The part is
Press RETURN
and
Press ENTER at the
menu.
changed
?
playback
5 slow-motion
Notes :
?
highlighted.
9
After you finish editing, select the 'Done' icon
then press ENTER.
The confirm message for
10
deleting
will appear.
Use b / B to select 'Ok' then press ENTER.
The selected part is deleted from the title and Title
List-Original
or
Title
List-Playlist
menu
appears.
51
EDITNG
Title and
Naming
You
1
can name
VR
Title
titles
Video
+RW
Combining
+R
VR
independently.
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options
2
a
Chapter Editing (Continued)
on
appears
the left side of the
menu.
Use vVbBto select the 'Title Name'
menu
+RW
Chapters
+R
Use this function to combine two
Original chapters
Into One
into
adjacent Playlist
or
one.
Note :
option
This function is not available if there is
only
one
chapter
within the title.
then press ENTER.
Keyboard
Two
appears.
1
On the
ter of
Chapter List menu, select the first chapthe two chapters you want to combine
then press ENTER.
Chapter List options appear
on
the left side of the
menu.
2
3
Enter
a name
Use vVbBto select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
for the title. Use vVbBto select
character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 31
a
(Disc Label).
3
4
Choose OK then press ENTER to save the
and return to the previous menu display.
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
Notes :
?
?
Names
be up to 32 characters long.
For discs formatted on a different DVD Recorder
can
Receiver, you will
?
When
recording
see
on
discs, the entered
a
limited character set.
DVD-R, DVD+R
name
Recorder Receiver
52
only
only
is
displayed
or
DVD+RW
on
after finalization.
the DVD
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
is dis-
Title and
Moving
Chapter Editing (Continued)
VR
Playlist Chapter
a
Protect
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
Note :
This function is not available if there is
1
Select
a
chapter
from the
only
one
chapter.
Chapter List-Playlist
menu.
2 Chapter List-Playlist options
of the
appear
on
the left side
menu.
Use vVbBto select 'Move' from
3 options
+RW
+R
Use this function to protect against accidental
editing or deleting of the title.
1
2
Press MENU/LIST to
3
display
Use vVbBto choose
a
recording,
the Title List
menu.
title you want to pro-
tect then press ENTER.
Options
Press ENTER.
Title
a
appear
on
the left side of the
Select 'Protect' from the
screen.
options.
Playlist
then press ENTER.
Press ENTER to confirm.
4 The lock mark
will appears
on
the title's thumbnail.
Tip
4
Use vVbBto choose the
want to
chapter to then press ENTER.
pressing ENTER, updated menu is displayed.
move
After
place you
the
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
that, you
can
edit and delete the title.
53
EDITNG
Title and
Hide
You
a
can
Chapter Editing (Continued)
+RW
Chapter
+R
skip playing chapters
without
Dividing
deleting
from the
Use this command to
disc.
1
On the
List menu,
Chapter
choose a chapter you
use
vVbBto
1
2
split
a
menu
options
appears
on
the left side of the
appear
on
the left side of the
screen.
2
options.
Select 'Divide' from the Title List
3 highlighted.
Title Edit
Press ENTER to confirm.
chapter's
thumbnail will dim.
If you select a chapter that is already dim on the
Chapter List menu, you can 'show' it by choosing
"Show" from the Chapter List menu options. After
able to
see
menu
menu
option
options.
is
appears and goes into
STOP mode.
Tip
that, you
(Divide)
Current
are
titles.
screen.
Select 'Hide' from the
The
new
title you want to
a
Press ENTER after the 'Divide'
3
+RW
title up into two
On the Title List menu, select
divide then press ENTER.
The
want to hide then press
ENTER.
Options
One Title Into Two
picture
The first
doing
title's
the title.
thumbnail
The second
title's thumbnail
4
Use pause step, search and slow-motion to find
the point you want to divide the title.
5
When the 'Divide'
ENTER at that
You
option
point.
can remove
the
is
highlighted, press
dividing point
and exit the Title
(Divide) menu, use v / V to select 'Cancel'
option then press ENTER. The division point is
Edit
removed.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
4 minutes to divide.
54
new
titles. It take up to
Additional Information
+RW
Overwriting Recording
To overwrite
video
a new
recording
previously
on a
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end of
the Disc.
1
2
Select
input
you want to record
source
REF NC
(TV
channel, AV1-2, DV).
Press MENU/LIST to
display
the Title List
menu.
3
To
play
back
Most
3
4
title you want to
over-
or
(PLAY).
Recordings on
Players (Finalizing
DVD
regular
players
can
play
a
Disc)
finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also
play
write.
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
Press REC
check what formats of discs it will
(z) to start overwrite recording.
Overwrite recording starts from the start point of
Finalizing
Press STOP
5 The
new
stop the overwrite recording.
to
(x)
title is created and
updated
menu
is dis-
played.
Notes :
This function is not available for
If the overwrite is
longer
than
title.
protected
the recording length
a
of the current title, the next title is overwritten.
But if next title is protected, the overwriting stops
at the
starting point
of the title.
recordings and editings in place so
played on a regular DVD player or
'saves' the
that the disc
can
be
computer equipped with
a
Viewing
To finalize
a
disc, refer
+RW
can
DVD
menu
+R
view the Title List
player
that is
capable
displayed on the other
playing DVD+RW or
menu
of
for
to "Finalize" on page 31.
Notes :
Unfinalized DVD+RW is
playable
on
regular
DVD
players.
displayed
Recorders or Players
other DVD
on
suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
The edited contents of
Title List
play.
the
title.
You
B
want
Your
Other DVD
a
title, select the title you
then press ENTER
Playing
Use vVbBto choose
a
a
DVD+RW disc is
compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
How long finalization takes depends on the type of
on
disc, how much is recorded
ber of titles
on
on
the disc, and the
num-
the disc.
DVD+R discs.
1
2
Insert DVD+R
or
DVD+RW disc recorded
already.
Press TITLE in
Title List
menu
play
or
stop mode.
will appear
as
shown below.
Tip
You
can remove
STOP
the Title List
menu
by pressing
(x).
55
Radio
Operation
the Radio Stations
Presetting
You
can
tuning,
preset 50 stations for FM and AM (MW). Before
make
that you have turned down the vol-
sure
Preset radio stations in the Recorder Combi Receiver's
memory first
ume.
1
2
3
Press FM/AM
AM
on
the remote control until FM
(MW) appears
in the
display
And then every time you press
AM (MW) changes alternately.
Press and hold TUN.-
or
or
TUN.+
indication starts to
Scanning stops
in
a
when the Recorder Combi Receiver tunes
station. "ST"
(for
stereo
program) appear
the remote control.
on
Press TRK/PRESET-
3
or
or
TRK/PRESET-
on
the remote control to select the preset number
Press ENTER
the remote control.
on
want.
-
select another function mode
Use manual
or
tune in the station
TUN.+
a
weak
repeatedly
in
AV 1, AV 2
etc.,).
automatic
tuning,
on
on
tuning
press TUN.-
in
step
or
2.
TUN.+
on
repeatedly.
tuning,
press and hold TUN.-
the remote control for about three
or
sec-
the remote control.
signal
step 3
to
manually.
FM program is noisy
Press MO./ST. on the remote control
Press and hold ENTER for about five seconds and
"MEM CLEAR" is
appeared in the display window and
ENTER again, the stations are cleared.
If you have accidentally entered into the "MEM
CLEAR" mode and you do not wish to clear the
For your reference
If
To clear all the stored stations
mem-
ory, do not press any key. After a few seconds, the
"MEM CLEAR" display will go off by itself and change
to normal mode.
or
For automatic
TUN.+
station with
a
(DVD,
To listen to non-preset radio stations
onds
56
TRK/PRESET-
the remote control to select the
the remote control
3 to 6 to store other stations.
Repeat steps
then press
on
or
Adjust the volume by rotating VOLUME on the front
panel or by pressing VOLUME + or on the remote
control repeatedly.
For manual
The station is stored.
Press TUN.-
FM appears in the
Press POWER to turn the Recorder Combi Receiver off
preset number will flash in the display window.
To tune in
left).
To turn off the radio
Press ENTER
A
or
the
Each time you press this button, the Recorder Combi
Receiver tunes in one preset station at a time.
in the dis-
you want.
7
2 repeatedly
the
play window.
6
Press CH/TRK/PRESET-
then
change,
(MW)
on
window.
preset station you
release.
5
display
remote control for about three seconds until the
frequency
4
1
radio stations"
The last received station is tuned in.
FM and
on
(see "Presetting
Press FM/AM until AM
window.
FM/AM,
to the Radio
Listening
an
so
that "ST" dis-
appears in the display window. There will be no
stereo effect, but the reception will improve. Press
this button
To
again
to restore the stereo effect.
improve reception
Reorient the supplied antennas.
Language
Code and Area Code List
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Galician
7176
7771
Somali
8379
6577
Georgian
7565
7783
Spanish
6983
Arabic
6582
German
6869
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
Greek
6976
Maltese
7784
Swahili
8387
Assamese
6583
Greenlandic
7576
Maori
7773
Swedish
8386
Azerbaijani
6590
Guarani
7178
Marathi
7782
8476
Bashkir
6665
Gujarati
7185
Moldavian
7779
Tagalog
Tajik
Basque
Bengali; Bangla
6985
Hausa
7265
Mongolian
7778
Tamil
8465
6678
Hebrew
7387
Nauru
7865
Tatar
8484
Bhutani
6890
Hindi
7273
7869
Telugu
8469
Bihari
6672
Hungarian
7285
7879
Thai
8472
Breton
6682
Icelandic
7383
7982
Tibetan
6679
Bulgarian
6671
Indonesian
7378
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Burmese
7789
Interlingua
7365
Pashto, Pushto
8083
Tigrinya
Tonga
Byelorussian
6669
Irish
7165
Persian
7065
Turkish
8482
Cambodian
7577
Italian
7384
Polish
8076
Turkmen
8475
Catalan
6765
Japanese
7465
Portuguese
8084
Twi
8487
Chinese
9072
Javanese
7487
Quechua
8185
Ukrainian
8575
Corsican
6779
Kannada
7578
Rhaeto-Romance
8277
Urdu
8582
Croatian
7282
Kashmiri
7583
Rumanian
8279
Uzbek
8590
Czech
6783
Kazakh
7575
Russian
8285
Vietnamese
8673
Danish
6865
Kirghiz
7589
Samoan
8377
Volapuk
8679
Dutch
7876
Korean
7579
Sanskrit
8365
Welsh
6789
English
Esperanto
6978
Kurdish
7585
Scots Gaelic
7168
Wolof
8779
6979
Laothian
7679
Serbian
8382
Xhosa
8872
Estonian
6984
Latin
7665
Serbo-Croatian
8372
Yiddish
7473
Faroese
7079
Latvian, Lettish
7686
Shona
8378
Yoruba
8979
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech Republic
Denmark
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
AF
SG
SK
57
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Cause
Symptom
Solution
No power.
The power cord is disconnected.
Plug the power
securely.
No
TV/DVD mode for the recorder is set to
TV.
Press TV/DVD on the remote control
repeatedly to choose DVD mode. TV
indicator disappears in the display
window.
The TV is not set to receive DVD
Recorder Receiver signal output.
Select the appropriate video input mode
on the TV so the picture from the DVD
Recorder appears on the TV screen.
The video cable is not connected
Connect the video cable
picture.
cord into the wall outlet
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The equipment connected with the
audio cable(s) is not set to receive DVD
Recorder Receiver signal output.
Select the correct input mode on the
Audio Receiver so you can listen to the
sound from the DVD Recorder Receiver.
The audio cables
Connect the audio cable
are
not connected
the TV.
on
securely.
securely.
The
playback picture
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
The audio
Replace
connecting
The disc is
is
cord is
damaged.
it with
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
Receiver does not start
playback.
No disc is inserted.
Insert
a
disc. (Check that the disc indicator in the display window is lit.)
An
Insert
a
unplayable
The disc is
disc is inserted.
placed upside
The disc is not
placed
disc. (Check the disc
type, color system, and regional code.)
Place the disc with the
down.
down.
within the
playable
playback
Place the disc on the disc tray
inside the guide.
guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
The picture from the
external input is distorted
The video signal from the external
ponent is copy-protected.
Some channels are
skipped over when
Those channels
Recorder.
are
not stored in the
Restore channels. See
on pages 23-24.
The
picture or sound of
broadcasting channel is
weak or missing.
Aerial
are
loose.
Tighten
The picture from the
external input is not
shown.
The recorder's
or
side
correctly
change
Yo u cannot connect via this Recorder.
Connect the component directly to your
TV.
com-
"Program
Edit"
usingv/V.
Radio stations cannot
be tuned in.
?
or
The antenna is
source
positioned
or
connected
The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
connections
Use AV to select
OPT, AV2 or DV)
is incorrect.
poorly.
?
58
cables
?
?
or
input
Connect the antenna
replace
channel
cable.
(AV1,
securely.
the antennas and connect
external antenna if necessary.
Adjust
?T une in the station
manually.
an
Troubleshooting (Continued)
Cause
Symptom
The disc
Can't play a disc
recorded using this
Recorder on another
was
Solution
recorded in Video mode.
Some players will not play even a finalized disc recorded in Video mode.
player.
The disc
Cannot record or did
not record successfully.
was
recorded in VR mode,
The remaining blank space
is insufficient.
Use another disc.
source.
When setting the recording channel, the
channel is tuned on the TV's own tuner.
Select the channel
built-in TV tuner.
the Recorder's
When
Use
you
are
trying
to record is
protected.
recording
to a Video mode
programs that are copy-once
cannot be recorded.
is not
the disc
compati-
You cannot record the
source
copy
recording
possible.
The other player must be RW
ble in order to play it.
No solution.
on
(page 31)
No solution.
Discs recorded with copy-once material
cannot be played on other players.
The
Timer
Finalize the disc.
disc,
protected
Clock in DVD Recorder Receiver is not
set to correct time.
on
VR mode formatted disc for copymaterial.
once
a
Set clock to correct time. See "Auto
Clock Set" or "Manual Clock Set" on
page 25.
Timer has been
programmed
incorrectly.
Stereo Audio Record
and/or Playback is not
present.
Timer. See "Timer
Reprogram
Recording"
Timer record indicator light does not
appear after programming timer.
Reprogram
TV is not
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
on
page 44.
Timer.
mat.
DVD Recorder Receiver A/V Out jacks
are not connected to TV A/V In jacks.
Make A/V connections. Stereo is
available only via A/V output from DVD
Recorder.
DVD Recorder Receiver Audio/Video Out
is not selected for viewing at the TV.
Select AUX
DVD Recorder Receiver's TV audio
Set TV audio channel mode to Stereo.
See "Changing TV audio channel" on
channel is set to
mono.
or
A/V
source as
TV
input.
page 43.
The Remote Control
does not work properly.
Resetting
or
Point the Remote Control at the remote
sensor on the DVD Recorder Receiver.
The Remote Control is too far from the
DVD Recorder Receiver.
Operate
There is an obstacle in the path of the
Remote Control and the DVD Recorder.
Remove the obstacle.
The batteries in the Remote Control
exhausted.
Replace
the recorder
If you observe any of the
The unit is
The Remote Control is not pointed at the
remote sensor on the DVD Recorder.
plugged in,
off.
The front
The
...you
panel display is not working.
recorder is not operating normally.
can
the batteries with
m.
new ones.
reset the recorder as follows:
Press and hold the POWER button for at least five
following symptoms...
but the power will not turn
are
the Remote Control within 7
on
seconds. This will force the unit to power off then
turn the unit back on.
the power cord, wait at least five seconds,
and then plug it in again.
Unplug
59
REF NC
Specifications
General
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
AC 110-240V, 50/60 Hz
110W
435
x
57x 372
mm
(w
x
h
x
d)
4.9Kg
5˚C to 35˚C
5 % to 90 %
B/G, PAL I/I, SECAM D/K colour system
Television system
PAL
Recording
format
PAL
Recording
format
DVD Video
Recording
Recordable discs
Recording, DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable,
DVD+Recordable
Recordable time
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
(Double Layer)
DVD (4.7GB): Approx. 1 hour (HQ mode), 2
4 hours (LQ mode), 6 hours (EQ mode)
hours
(SQ mode),
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
DVD
20 kHz
Inputs
ANTENNA IN
VIDEO IN
AUDIO IN
(AV1,2)
(AV1,2)
S-VIDEO IN
OPTICAL IN
DV IN
Antenna
input,
75 ohms
75 ohms, sync negative, RCA jack x 2
-6 dBm more than 47 kohms, RCA jack (L, R) x 2
1.0
Vp-p
(Y) 1.0 V (p-p), 75 Ω, negative sync,
(C) 0.286 V (p-p) 75 Ω
Optical connector x 1
4 pin (i.LINK/IEEE 1394 standard)
Mini DIN
4-pin
x
1
x
1
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
cvvv
60
Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
1
Specifications (Continued)
Amplifier
Stereo mode
70W
Surround mode
Front: 70W
(8Ω
+
at 1
70W
kHz, THD 10 %)
(THD
10
%)
Center*: 70W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Tuner
70W
+
Surround*: 70W
70W
+
Subwoofer*: 150W
(4Ω
(8Ω
at 1
at 30
kHz, THD 10 %)
Hz, THD 10 %)
REF NC
Specifications
87.5
Tuning Range (FM)
Intermediate Frequency (FM)
Signal-to-noise ratio
Tuning Range (AM)
Intermediate Frequency (AM)
-
108 MHz
10.7 MHz
60 dB
522
(Mono)
1,611 kHz
-
450 kHz
Antenna
Wire antenna
(FM)
Loop antenna (AM)
Speakers
Front
(LHS-55SBS)
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Rated
Net
Passive Subwoofer
Input Power:
Max Input Power:
Dimensions(WxHxD):
Net Weight:
Center
(LHS-55SBC)Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Rated
Input Power:
Max Input Power:
NetDimensions(WxHxD):
Net Weight:
1
1
Way
Speaker
8 Ω
(LHS-55SBW)
1 Way 1 Speaker
Type:
4 Ω
Impedance:
40
1,500 Hz
Frequency Response:
Sound Pressure Level:
82 dB/W (1m)
Rated Input Power:
150W
Max Input Power:
300W
Net Dimensions (WxHxD):
180 x 400 x 355 mm
Net Weight:
5.6 kg
-
110
20,000 Hz
-
82 dB/W
(1m)
70W
140W
140
0.95
1
222
x
x
153
mm
kg
Way
1
Speaker
8 Ω
110
20,000 Hz
-
82 dB/W
(1m)
70W
140W
300
x
1.0
kg
116x91
mm
Accessories:
1, Audio cable (L, R) x 1, RF 75-ohm Coaxial Cable x 1, Speaker cable x 6, FM Antenna cable
AM Antenna cable x 1, Remote control x 1, Batteries (AAA) x 2, Ferrite core x 2, Cord Adaptor x 1
Video cable
Design
x
and
specifications
are
subject
to
change
x
1,
without notice.
61
P/N: 3834RH0118Z
Download PDF

advertising