LH-T252SC NA3SLLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T252SC (Speakers: LHS-25SCS, LHS-25SCW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0087N Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This About the shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the symbols for instructions Indicates hazards itself or other likely to cause material damage. Indicates special operating Indicates tips harm to the unit features of this unit. product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in such as a book case or similar unit. a confined space and hints for making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. CAUTION: This DVD/CD receiver employs a employs a laser system. CAUTION: This DVD/CD receiver To ensure proper use of this Laser System. product, please read this owner's carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location (see service procedure). manual Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 ___________________________________ ___________________________________ Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............20 Playing an Audio CD and MP3/WMA Disc . . . . . 20 BeforeUse..............................4-5 Pause.............................20 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack...............20 RepeatTrack/All/Off...................20 NotesonDiscs..........................5 Search.............................20 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................21 ViewingaJPEGdisc.....................21 RemoteControlOverview....................7 SlideShow.........................21 StillPicture.........................21 Preparation Connections............................8-10 TVConnections.........................8 .8 ExternalEquipmentConnections SpeakerSystemConnection................9 . . . . . . . . . . . AerialConnections........................9 SpeakerPositioning......................10 BeforeOperation.......................11-16 Mini Glossary for Audio Stream & Surround Mode.................................11 SoundMode...........................11 On-ScreenDisplay.......................12 InitialSettings........................13-16 GeneralOperation....................13 Language..........................13 Display............................13 Movingtoanotherfile.................21 Torotatepicture......................21 ProgrammedPlayback.....................22 RepeatProgrammedTracks................22 .22 ErasingatrackfromProgrammeList 22 Erasing the Complete Programme List DivXDiscOperation.......................23 . . . . . . . . . . . . . . AdditionalInformation.....................24 LastConditionMemory...................24 ScreenSaver...........................24 ControllingtheTV.......................24 OperationwithRadio......................25 Presettingtheradiostations................25 Listeningtotheradio.....................25 OtherFunctions...........................26 SleepTimerSetting......................26 Dimmer...............................26 Audio..............................14 Mute.................................26 Lock(ParentalControl)................15 XTS(ExcellentTrueSound)................26 XTSpro...............................26 Others.............................16 Operation Reference DVDorVideoCDOperation...............17-19 PlayingaDVDandVideoCD...............17 LanguageCodeList.......................27 CountryCodeList.........................27 Troubleshooting........................28-29 Specification.............................30 GeneralFeatures.....................17-19 MovingtoanotherTITLE...............17 17 Moving to another CHAPTER/TRACK . . . . . SlowMotion.........................17 Still Picture and Frame-by-Frame Playback . 18 Search.............................18 Repeat............................18 RepeatA-B.........................18 TimeSearch........................18 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................19 TitleMenu..........................19 DiscMenu..........................19 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .19 .19 Subtitles...........................19 3 Introducin Before Use Playable Discs ote on DTS-encoded CDs playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. When DVD (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit SVCD and CD-R or MP3, WMA, JPEG DVD-RW, DVD+RW, CD-RW that contains audio titles, can or play a DivX files. Disc-related terms Title (DVD only) The main film content Depending the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. on Some of DVDs and Video CDs playback operations may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions or supplied purposes may not be able to be you to locate it played on enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. On (VCD) video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. with the DVDs and Video CDs. Some DVDs made for busithe unit. Types There of video CDs are two types of video CDs: Video CDs code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "3" encoded 3 DVD software. The region code on the labels of some DVDs indicates which type of player can play those discs. This unit can only play DVDs labeled "3" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 feature content additional feature content, or music album. Each title is assigned a title reference number Scene otes on DVDs and Video CDs Regional accompanying or otes ness or equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc. To use volatile such liquids, turn off the leave marks Cleaning use a there may be a considerable temperature increase inside the car. light, as Cleaning discs Fingerprints or and dust the disc on reduce sound with a clean Before quality. cloth. Wipe distort the can picture clean the disc playing, the disc from the centre out- wards. on or the surface. the unit Do not To clean the cabinet a Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- plastic products in long period of time. They will contact with the unit for a Use store the disc in its case. insecticide spray, as the unit. Do not leave rubber near or playing, the exterior surfaces clean keep Do not radio, or discs soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzene, or use thinner, are moistened with a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. "" may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc on Discs DVD VCD2.0 Disc Handling get on playback by the edges VCD1.1 side of the disc. so that fingerprints symbols DVD video disc. for instructions following symbol is represented by the symbol. one to the disc specific of the DVD and finalized DVD±R/RW. Video CDs with the PBC (playback control) or tape on the disc. Video CDs without the PBC (playback control) function. will not CD the surface. Do not stick paper that function. Do not touch the Hold the disc on A section whose title has applicable only Notes symbol display Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel STANDBY/ON STANDBY indicator MIC Connect a microphone Lights red when the receiver is in Standby mode (off). to MIC sockets. DISC PLAY Tray Press and hold down this button about 3 seconds, then press repeatedly to select other function. TUNING(-/+)/ SKIP(-/+) OPEN/CLOSE button DISPLAY Window MONO/STEREO/ PAUSE/STEPSTOP POWER CORD SPEAKER Connectors FM Antenna Connector MONITOR OUT Connector AUX IN 66 8 6 6 6 MONITOR OUT AUXILIARY INPUT Connectors AM Do not touch the inner panel. Electrostatic damage to the unit. 6 Loop Antenna Connectors pins of the jacks on the rear discharge may cause permanent VOLUME controller Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) or Selects input TV DVD SLEEP (FM and AM bands) tuner MUTE directly or select numbered options in at a Selects SUBTITLE sound. AUDIO SOUND MRAKER - SEARCH PRESET/ Marks CH audio an language (DVD) audio channel (CD). or Accesses the Selects the TV's SCAN-/+(bb/BB) REVERSE SCAN FORWARD Select programme of TV Displays the disc's Title VOLUME To a radio station's (+/-) adjust speaker volume and PAUSE/STEP menu. frequency into Pause playback STOP (x) (X) ZOOM CLEAR track number on the Enlarges the program menu or a mark MARKER SEARCH on the DIMMER a TV volume. Stops playback. the tuner. Removes menu, if available. PLAY (B) Starts playback. MEMO. Enter Radio. TITLE SKIP(>) Program or To tune in the desired radio station. SKIP PROG. or removes selection. TUN(-/+) (b/B): Search forward*/go to next chapter or track. Accesses menu PRESET/CH(+/-) (v/V): playback. Search backward*/go to beginning of current chapter or track or go to previous chapter or track. source. Acknowledges the forward. SKIP(.) display. ENTER SLOW-/+(t/T) Reverse/ Forward slow menu. b/B/v/V (left/right/up/down) Selects an option in the menu. - DVD disc. or MARKER SEARCH INPUT . Search backward point during playback. Accesses On-Screen SETUP setup menu MENU menu on a menu. DISPLAY .. Selects the sound mode. or removes a Displays + SOUND MODE Accesses language (DVD). SEARCH AUDIO an subtitle a MARKER enjoy great sound effect. Selects speakers. Removes the setup XTS To automatically. RETURN natural and realistic more off SUBTITLE XTS pro enjoy System to turn specified time. only) SLEEP Mute the a menu. To TV MUTE service, programme number a (LG Set the 0-9 numerical buttons Select source. To control the TV. BAND System's and closes the disc tray. AUX accesses Select the (Z) menu. DVD video image. Press to change brightness of the display window on the front panel dur-ing in power-on status. REPEAT Repeat chapter, track, title, all. REPEAT A-B Repeats sequence. MIC ECHO VOL.(V/v) VOL.(V/v) Adjusts microphone volume. Adjusts echo volume. Remote Control Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction in front of the remote sensor Remove the remote battery battery cover on control, and insert AAA) batteries correctly. with installation the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Rear of TV VIDEO INPUT AUDIO INPUT SCART INPUT ip Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the R L L best connections. V Caution Make sure the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input on protection system. VIDEO Cable AUX IN T MO Rear of DVD/CD receiver SCART-RCA OR O Adaptor Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using the Rear of DVD/CD receiver TV/MONITOR supplied (V). (SCART type) Tip: If you want to connect the DVD/CD receiver to a TV with SCART socket, use the SCART-RCA adapter (T). External Equipment Connections Connection Rear of VCR (L/R) jacks on the DVD/CD receiver to the AUDIO OUT (L/R) jacks on the VCR, LD player, etc using the audio cables. (or LD Connect the AUX IN AUDIO OUTPUT L player, etc) VIDEO OUTPUT R Tip: Press AUX these on the remote control to select input to jacks. AV 1 appears on the Display Window. AUX IN 66 8 6 6 6 MONITOR OUT 8 Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible Front supplied speaker surround sound, Center speaker (Right) cords. adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) speaker Prepa tion AUX IN 66 666 8 MONITOR OUT Rear speaker (Right surround) Rear speaker (Left surround) Subwoofer otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Connect the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) AUX IN 66 8 6 6 6 MONITOR OUT otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire aerial. After connecting the FM Wire aerial, keep it as horizontal as possible. 9 Connections (Continued) Speaker Positioning In the case of normal position the 6 use speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the speakers for equal distance. And by hearing position set up the interval between Centre speaker The centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room size, if the audience is 90 than the listener's - cm near to the rear wall set the rear speakers opposite each other, and ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 10 set the Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. means identical to the When DVD is inserted You change can the Digital Audio Output this feature is used. After you select 2 channel a) (For example ) by pressing AUDIO button, button repeatedly. D 2CH The " Bypass (II) - II creates five full-bandwidth output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use with any stereo music BYPASS according to the way it was recorded. press SOUND Matrix signals is played (For example 1 ENG D 5.1 CH or ) by pressing AUDIO button, " press SOUND button. indicator will be displayed on the TV screen. "BYPASS" indicator will be only displayed on the display window. When Video CD is inserted Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. BYPASS HALL STUDIO CLUB THEATER 1 PL ll MOVIE CHURCH PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → recordings. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono. Software with multichannel surround audio or 4 ENG -" sources. D 2CH Music Movie After you select 5.1 channel b) DTS from two-channel 2 ENG " 5.1 CH Dolby Pro Logic by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when 3 ENG Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. mode → → ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. When CD is inserted Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the following order. BYPASS HALL STUDIO CLUB THEATER 1 PL ll MOVIE CHURCH PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → For your reference ? You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. - - - otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system. 11 Prepa tion Before Operation (Continued) On-Screen Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: You display can the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. The selected item is highlighted. Chapter Number 1/12 b / ENTER Time search 0:20:09 Numbers, ENTER Audio Press b / B to 3 use change the the number buttons if inputting the title You setting. appropriate (e.g. number). For press ENTER to execute the some can also A-B Repeat title Repeat sequence Resume Action play setting. Angle Sound from this prohibited or b/Bor AUDIO functions, PLAYBACK STATUS/RESTRICTIONS Title language and Digital Audio Output mode Subtitle language point ABC 1 ENG otes If no button is screen all of the features pressed for 10 seconds, display disappears. b/B Bypass Selection Method the on- Track Number (or PBC mode) Time search 1/3 Sound b / B, Numbers ENTER 0:20:09 Numbers ENTER b/Bor Audio Channel 12 b/B Example: On-Screen Display during playing VCD not available provide b/Bor SUBTITLE 1/3 Items Some discs may not shown below. B, Numbers AUDIO Bypass b/B Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 13 to 16. By using To Press SET UP to display the menu. SET UP will take you back to initial To go to the next level: General The / menu V to 3 4 5 Select screen v / v / V to V audio), appears. option language Disc Menu Original Prepa tion disc the second level. well as alternate setting for setting(s). select the second desired move to the option the third level. to select the desired Select for the Setup menu and on-screen display. DVD you prefer for the audio track subtitles, and the disc menu. language Original: then will be shown the current then press B to Use Off Disc Audio / Subtitle / Menu select the desired as a Select the B to move to selected item, Use Disc Subtitle OSD Operation The setup 2 press Original Move Press SET UP. Use Disc Audio screen. the remote control. on v English A second press of To go back to the previous level: Press b on the remote control. 1 OSD and exit the Menu: display Press B LANGUAGE was Refers to the original language (disc in which the recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 28. If you enter the wrong language code, press CLEAR on the remote control. setting then press ENTER to confirm your selection. Some items require additional steps. Press SET UP or PLAY to exit the DISPLAY setup DISPLAY menu. TV 16:9 Aspect Display Mode Widescreen Move TV Aspect DVD 4:3: Select when a 16:9: Select when Mode Display Display Mode Select standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD setting works only when the TV Aspect mode is set to "4:3". upper and Displays a wide picture with lower portions of the screen. Panscan: Automatically displays the wide picture and cuts off the portions that do not fit. Letterbox: the entire screen bands on the on 13 Before Operation (Continued) AUDIO Distance Each DVD disc has If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the of audio output options. Set the DVD/CD Receiver's AUDIO options according to a variety the type of audio system you use. listener at the AUDIO 5.1 sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press b / B to Select Speaker Setup DRC On Vocal On same time. adjust the Distance of the selected speaker. ote You Rear Move 5.1 and Select Test DVD Speaker Setup adjust the Distance of Center speaker speakers (Left & Right) only. can Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. Press b / B to test the Adjust of each signals speaker. volume of test signals the volume to match the memorized in the system. Front Left (L) Center → Rear Right (R) → → Front Rear Left (L) Right (R) → → SubWoofer AUDIO Dynamic Range Control (DRC) Speaker Size DVD Front L Small Volume 0 dB Distance 2 m Test With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, Off Select thanks to Move Return Enter technology. However, dynamic range of the quietest ones). Then, you may listen to a movie lower volume without losing dialog intelligibility. Set DRC to On for this effect. a otes The DRC function works ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the speaker settings settings. are fixed, you cannot change Volume Press b / B to adjust the output speaker. (-5dB +5dB) ~ level of the selected depending only during playback Dynamic Range Compression on may differ the DVD disc. DVD Vocal Set Vocal to On only DVD is The karaoke channels mix into of recorded discs. Dolby Digital The level of 14 audio and the at a speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right)) the digital you may wish to compress the audio output (the difference between the loudest sounds Speaker Select DivX playing. a when a multi-channel Karaoke normal stereo sound. on the disc will Before LOCK Operation (Continued) Password (Parental Control) You LOCK Rating Unlock Password **** Country 1 2 Code can 3 highlighted. Enter the new 4-digit code, Input it again to verify. 4 Press SET UP to exit the control information certain scenes on that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or 1 rated control feature allows you to block access below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. 1 Select "Rating" the LOCK on menu B. To the 6-digit number security code is and the 2 Enter a new code the Rating, 2 Code features, you Password and must input code you created. If you have not yet entered a prompted to do so. the Country 4-digit security security code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3Selectaratingfrom1to8usingthev/V buttons. Rating 1-8: Rating and rating eight (8) one (1) has the most restrictions is the least restrictive. can "210499" on clear it using the setup menu cleared. described above. as When " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country Code DVD Enter the code of the access Code ote setup then press forget your Security Input to parental to scenes menu. If you forget your security code you the following steps: from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The then press ENTER. Select DVD for children to view. change password. Select Password on the LOCK menu then press B. Follow step 2 as shown left (Rating). "Change" or If you Some movies contain enter or "New" is Move Rating (Security Code) country/area whose standards used to rate the DVD video disc, based in the reference chapter. were 1 2 Select "Country Code" on the LOCK on the list menu then press B. Follow step 2 as shown left Select the first character 3 Shift 4 using v / V buttons. using B button and select character using v / V buttons. the second (Rating). cursor the Unlock If you select unlock, parental control is not active and the disc plays in full. 5 Press ENTER to confirm your country code selection. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available on not played unless an alternate scene the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press ENTER to confirm your 4 then press SET UP rating selection, to exit the menu. 15 Prepa tion Before Operation (Continued) OTHERS ? Display the number which you can OTHERS PBC ? On This rental video has 7 views left. A view ends when you Select DivX(R) Registration video, or stop playback, play turn off your Do you want to use one of your 7 views Set No expired. This rental is VCD Playback Control (PBC) expired. to On or Off. ? On:Video CDs with PBC now Select Move PBC The rental has been different player. Yes ? a played according are to the Display the authorization error. PBC. Off:Video CDs with PBC played are the same way as Audio CDs. DivX(R) Registration You can DivX show the DivX DRM Management) Registration Your Please the registration use DivX(R) (Digital Right code for your unit code is this code to the To learn XXXXXXXX register this player with Video On Demand service. This will allow you to rent and using : only. DivX(R) more purchase videos Video On Demand format. go to www.divx.com/vod Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental The an encrypt movie file. ote If you rent the DivX VOD file, it has several viewing limits as show below. 16 options of This video player play is not authorized to this video. watch the file. DVD or Playing Video CD a DVD and Video CD Playback Setup Turn on Operation DVD VCD2.0 the TV and select the video General Features VCD1.1 input ote source con- nected to the DVD/CD Receiver. available Audio system: Turn on the audio system and select the input source connected to the DVD/CD Receiver. (Z) to open the disc When tray. double-sided DVD is inserted, make the side you want to play is facing down. Press OPEN/CLOSE 3 READING starts (Z) to close the Moving press PLAY. In some cases, the disc menu might tray. appear instead. If The a menu screen is displayed may be displayed first after Video CD which contains a menu. menu screen DVD or loading a When a title, you can move to to another CHAPTER/TRACK title disc has DivX on a more disc has than chapter/track as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, number Use the bBvVbuttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE MENU to return to the two-digit numbers, press (0-9) in rapid succession. Press RETURN to return to the the operating procedures for depending on the disc. using may differ Follow the instructions on the each menu screen. Slow Motion 1 If Parental Control is set and the disc is not within the the 4-digit code must be entered and/or the disc must be authorized VCD1.1 player pause. will enter SLOW mode. 3 t 1/8, t 1/4 or t 1/2 1/16, T 1/8, T 1/4 or T 1/2 required speed: t (backward), or T (forward). To exit slow motion mode, press PLAY. Slow motion discs that have code different from your receiver. The this player is 3 (three). The during ote page 15). region code. play VCD2.0 DVD (see on Your receiver will not Press SLOW -/+ 2 1/16, otes "Parental Control", DVDs may have a the numbered buttons Use the SLOW -/+ to select the You also may set PBC to Off under setup. Rating settings (not authorized), (0-9). menu screen. and the exact menu the numbered buttons For Use the number buttons to select the track you want to view. setting using ote menu screen. VCD2.0 Menu one press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track DVD or than more DVD follows: as VCD2.0 DVD the TV screen, and playback If playback does not start, automatically. menu. sure on appears disc has use Press DISP., then press the appropriate numbered button (0-9) to select a title number. 2 facing up. a Setup to another TITLE another title Load your chosen disc in the tray, with the label When a the on Moving Press OPEN/CLOSE 1 Unless stated otherwise, all operations described the remote control. Some features may also be region region code playback in reverse is not applicable for Video CD. a for 17 Operation DVD or Video CD General Features Still Picture and VCD2.0 DVD 1 2 (continued) Frame-by-frame playback VCD1.1 Repeat To repeat VCD2.0 DVD sequence in a now briefly Press A-B on VCD1.1 title: the TV starting point. screen. at your chosen end point. A-B appears briefly on the TV screen, and the repeat go into PAUSE again begins. mode. sequence You To cancel the sequence, press A-B advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. can VCD2.0 DVD Press m or M or M Time Search VCD1.1 go into SEARCH mode. now Press DISP. 2 required speed: mX2, mX4, during playback. play appears mX8, mX16, MX2, MX4, MX8, on the The on-screen seconds, press 3/4 Within 10 Video CD, the Search to select the Time The "-:--:--" appears in the Time Search box. Within 10 seconds, To exit SEARCH mode, press PLAY. enter the required Search icon in the on-screen use display. the number buttons to start time. Enter hours, min- utes, and seconds from left to right in the box. DVD Video Discs To repeat the REPEAT. The the TV screen. REPEAT a third the TV currently playing, press Repeat Track icon appears on To repeat the disc currently REPEAT a second time. Repeat To exit screen. Repeat Track/All/Off To repeat the track REPEAT. The 3 - All icon appears on the TV screen. playing, press the TV Repeat mode, press screen. REPEAT a third time. The Repeat Off icon appears on the TV screen. ote On Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page a 16. 18 starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. ote on on to confirm the Playback screen. time. The 2 the TV seconds, press ENTER playing, press Repeat mode, press Repeat Off icon appears num- start time. currently playing chapter, press Repeat Title icon appears Video CDs Within 10 Repeat Chapter/Title/Off on remove bers. DivX Repeat Chapter icon appears To exit The 1 - VCD1.1 To repeat the title currently REPEAT a second time. The 3 VCD2.0 DVD Repeat 2 dis- the current disc. If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct 1 at elapsed playing time of speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). a playing screen. The Time Search box shows the (backward) or MX16, MX100 (forward). With CLEAR. VCD1.2 The Time Search function allows you to start any chosen time on the disc. to select the repeatedly mX100 VCD2.0 DVD or DivX during playback. The DVD/CD Receiver will Press m 3 a A- appears during playback. The DVD/CD Receiver will A-B Press A-B at your chosen DivX Press PAUSE/STEP Search 1 Operation (Continued) On Video CD with PBC, you must set PBC to Off the setup menu to use the Repeat function. a on DVD Video CD or General Features Marker Search You can nine start points To enter 1 a Operation (Continued) (continued) DVD playback VCD1.1 from VCD2.0 memorized a Special the contents of DVD Video discs: Menus point. Up to DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. mark, follow these steps. During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear 2 the TV screen briefly. 1 to enter up to nine Marker Repeat step on a on points disc. To Recall During The MARKER SEARCH Within 10 2 menu will appear seconds, press 1/2 on the screen. will start from the Marked 1 2 During a list menu may appear. angles, spoken lanoptions, and chapters for the camera guage and subtitle title. DVD Press MENU. scene. The disc menu is displayed. the MARKER SEARCH menu, press SEARCH. To clear menu can Disc Menu Press ENTER. remove menu, the menu will appear on Otherwise, the disc screen. The a to select a Marker number that you want to recall. To If the current title has the playback, press SEARCH. DVD Press TITLE. Marked Scene disc 1 2 3 Playback 4 Title Menu 1 a DVD Checking be memorized. can DVD Features Changing menu Language Press AUDIO repeatedly during playback to hear different audio language or audio track. playback, press SEARCH. The MARKER SEARCH DVD DivX Marked Scene disc the Audio will appear on the a screen. the Audio Channel Press 1/2 to select the Marker number that you Changing want to erase. Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT). Press CLEAR. 3 Repeat steps 4 5 VCD2.0 VCD1.1 The Marker number will be erased from the list. ote 2 and 3 to erase additional Marker If appears, the feature is not available on the disc. numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom VCD2.0 DVD 1 VCD1.1 during playback or still playback activate the Zoom function. If you press ZOOM DVD DivX Press S-TITLE repeatedly during different subtitle languages. playback to see the otes The Zoom function allows you to enlarge the video image and to move through the enlarged image. Press ZOOM Subtitles to The subtitle file of the DivX file is displayed only smi, srt and sub. If there is no information or there is a code that can not read in the DivX file, "1/1" etc are displayed. repeatedly, the magnification level increases up to four steps. 400% size 2 → Use the 1 2 zoomed 800% 3 4 → 1600% size buttons to move through the picture. ote The zoom function may not work for some DVDs. 19 Operation Audio CD Playing Disc an CD MP3/WMA Disc or Operation Audio CD and MP3/WMA MP3 Repeat You WMA can Track/All/Off play title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver recordings CD-ROM, CD-R, on MP3/WMA formatted play can or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. ? 1/12 Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 playing a MP3 WMA disc. on a disc. The repeat icon appears. ? 0:00:00 CD ? desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): Search CD 1 Press m or MP3 play repeatedly. WMA Mduring playback. The receiver will 2 Press m a now M or go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). required or MX2, 3 To exit SEARCH mode, press PLAY. MP3 / WMA 1. Press v / V to select see 2. a folder, and press ENTER to the folder contents. MP3 / WMA disc Press v / V to select a track then press PLAY ENTER. Playback starts. or with this player 48 Sampling frequency: within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz (MP3), The DVD/CD Receiver cannot read an limited ? as compatibility is follows: within 32 - - 0:00:00 1/104 ? MP3 List Program ? 1-Music1 - MP3/WMA 2-Music2 file that has 3-Music3 file extension other than a 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 ? 7-Music7 ? otes to the next page. CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and a MP3/WMA JPEG word or lighted. Then, use b menu is high- / B to select MP3/WMA or JPEG on top of the then press ENTER. Pause CD WMA playback, PAUSE/STEP again. track or or to return or 20 incorporate They should not briefly to a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. requires discs and recordings CD step back to the optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 WMA to the next track. previous track. of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. should have must are press briefly during playback to go to the beginning of the current case names achieve > Press . twice In press PLAY to another Track Press . ? File system. to meet certain technical standards in order to during playback. 2 To return to Moving playback MP3 / WMA files. We recyou use Easy-CD Creator, which cre- This DVD/CD Receiver MP3 1 Press PAUSE/STEP to ates an ISO 9660 file ? On format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is ommend that and press ENTER. move physical impossible If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the v / V to highlight Press MENU to CD-R these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. JPEG Disc Viewing a Operation JPEG disc JPEG JPEG disc limited play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. This unit can Insert disc and close the tray. The JPEG menu appears on the TV notes on ? a with this receiver is follows: upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't Depending after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2760 x see an on-screen screen. display Operation --- JPEG 2048 List as compatibility Preview pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 ?Some discs may be incompatible due to recording format or the condition of disc. JPEG Folder 7 JPEG Folder 8 2 Press v / select a folder, and press ENTER. Folder list, remote to the v / V buttons use ? the on ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While to the viewing a file, you can press STOP previous menu (JPEG menu). to move copying into the ".jpg" CD layout. If the files have rename and press ENTER. highlight different Ensure that all the selected files have the extensions when A list of files in the folder appears. If you are in a file list and want to return to the previous 3 V to ? a File them without names to be read the files by are Windows ".jpe" or ".jpeg" extensions, please as ".jpg" file. ".jpg" extension will not be able this DVD/CD Receiver. Even shown as JPEG image though files in Explorer. ips ? ? There four Slide : Speed options > (Slow), >> (Normal), >>> (Fast) and II (off). Use vVbBto highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are SLIDE SHOW Use vVbBto press ENTER. JPEG highlight STILL PICTURE 1. to the (Slide Show) then JPEG Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide show, press PLAY PAUSE/STEP again. (. or >) to advance to the next or once previous TO ROTATE PICTURE Press b / B while during showing a press JPEG MOVING TO ANOTHER FILE Press SKIP or viewing a picture file. JPEG picture to rotate the pic- ture clockwise or counter clockwise. 21 Programmed Playback CD MP3 WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert a disc. REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when below. Press REPEAT to select a disc. The repeat desired repeat mode. JPEG ? Program a 1/104 MP3 List playing icon appears. 2. 0:00:00 can Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu 2 Select or a track " on MP3/WMA Menu 1. place Repeat 2. (Add)" to place additional tracks on can add all tracks in the disc. Select " icon (Add All)" list. Repeat to erase additional tracks on Use v / V to select page. " (Del all)", then press ENTER. ote Press PLAY 4 the order or ENTER to start. Playback begins programmed the tracks. in which you stops after all of the tracks Playback "Program" list have To normal resume 5 back, ERASING THE COMPLETE PROGRAM LIST Select the track you want to start playing on the "Program" list. Press MENU to move to the next select a played track on in the once. playback from programmed playof AUDIO CD (or MP3/WMA) list and then press PLAY. 22 Press CLEAR. Or, select (Delete)" icon then press ENTER to place the selected track on the the list. then press ENTER. 3 " Program the list. ote You erase the "List", then press PROGRAM icon then press ENTER to the selected track on the "Program" list. select Use vVto select the track that you wish to from the Program list. The programs are also cleared when the disc is removed. DivX Disc Using Operation this DVD/CD Receiver you can play DivX disc. DivX disc disc and close the tray. The DivX appears on the TV screen. Insert 1 a 0:00:00 menu as compatibility with this player is limited follows: ?A vailable resolution size of the DivX file is under 720x576 1/12 (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 Movie Folder 6 Movie Folder 8 ? 2 list of files impossible code to may be displayed as " express in the DivX mark on the dis" _ play. Movie Folder 7 Press v / V to select (different by language). If there is file, it Movie Folder 5 by a folder, and press ENTER. A ? in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to and press highlight ENTER. If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded file is not interleaved, either video 3 ? If the file is recorded with 4 Press STOP to exit. * or PLAY. audio is out- putted. ports If you want to view a particular file, press v / V to highlight a file and press ENTER or some of 1-point unit supof the record level. GMC, the GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. otes ? Be sure DivX file ? ? to select "SUBTITLE ON" mode before playback ENTER every time. When the Subtile has more than two languages in the a by pressing original Subtile is only available. The Pro logic II Sound mode is not available for file, DivX file. Playable z ".avi ", DivX file ".mpg ", ".mpeg Playable Codec " format z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz ? - within 24 ? Bit 40 (MP3), 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - 23 Operation Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user for settings or Your remote control is DVD/CD Receiver the last disc that you have viewed. Settings remain in memory even if you remove the disc from the receiver the TV as capable well of operating your limited functions of LG TV. as Follow the instructions below to operate for your LG TV. switch off the receiver. If you load latest stop a disc that has its position is settings memorized, automatically recalled. the the remote control, press the TV to select the device to be operated. Before 1 using To switch the remote control mode different device), be (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the The LG TV. a Screen Saver The appears when you leave the DVD mode for about five minutes. Setting Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. (E/D) button screen saver player in Stop ote If the remote control does not TV, try the other code originally supplied Due to the variety or use operate your particular the remote control with the LG TV. of codes used by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every model of LG TV. 24 Operation Presetting You can tuning, with Radio the radio stations preset 50 stations for FM and AM (MW). Before make sure that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 on the remote control until FM (MW) appears in the display or 3 then when the DVD/CD Receiver tunes in appear in the 4 stereo a program) display window. Press PROG./MEMO. A (for on PR(D/E) on the remote control. Press PROG./MEMO. 6 again. want. on Press PR(D/E) repeatedly to select the select another function mode (DVD/CD, AV 1, or etc.,). Use manual or automatic tuning in tuning, press TUN- b control repeatedly. the remote control remote step or 2. TUN+ B on the tuning, 3 to 6 to store other stations. Press TUNING a weak to tune in the station in step 3 manually. Press and hold PROG./MEMO. for about two seconds in the display window PROG./MEMO. again, the stations are appeared can use (within If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" itself and change to mode. 3 on the remote control seconds). For your reference If an FM program is Press MONO/ST. disappears stereo by the number buttons preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 To clear all the stored stations and "CLEAR ALL" is preset radio station directly a to select a signal repeatedly or will go off want. press and hold TUN- b or TUN+ B for about two seconds on the remote control. station with and then press cleared. preset station you To turn off the radio You a the remote control - To select To tune in on Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. For automatic Repeat steps display window. For manual The station is stored. 7 FM appears in the To listen to non-preset radio stations the remote control to select 5 the preset number you or Press POWER to turn the DVD/CD Receiver off preset number will flash in the display window. Press display (MW) Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. until the release. station. "TUNED" and "STEREO" 2 on panel for about two seconds frequency indication starts to change, Press BAND until AM The last received station is tuned in. or the front Scanning stops 1 window. And then every time you press BAND, FM and AM (MW) changes alternately. Press and hold TUNING to the radio Listening in the effect, but the button again on noisy the front panel so that "ST." display window. There will the reception will improve. be no Press to restore the stereo effect. To improve reception Reorient the supplied antennas. ote If all stations have been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. To change already the preset number, follow the steps 5-6 as above. 25 Operation Other Functions XTS Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally 1 at a Setting specified time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. 2 Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF You (Excellent enjoy the vivid stereophonic sound of the digital original source without any signal distortion. Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: XTS- 1: When sound XTS- 2: high display source front You Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. of sound at woofer effect via the by playing the sound rear speakers same as the speakers. can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode. repeatedly. Mute sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER playing the movie with the weak bass relatively to the general music, it enforces the XTS- 3: Dimmer Sound) can ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. True ote The XTS- 2 mode is from 2.1 CH to 5.1 temporarily disabled when changing CH and it is enabled when changing it to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON 26 → XTS-P OFF setting changes in Language Use this list to Codes your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 Country Choose a 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM PY Ukraine UA Czech Republic Denmark CZ JP PH United States US DK Japan Kenya Paraguay Philippines KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW AF Country Code Country Ethiopia Fiji SG SK 27 Refrnce Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD Receiver does not work. picture. ? Correction The power cord is disconnected. ? No disc is inserted. ? ? The TV is not set to receive DVD signal ?T he video cable is not connected ? ? securely. ? sound or only a very low-level sound is heard. no ? The connected TV power is turned off. ? ? is poor. The DVD/CD Receiver does not start playback. into the Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is The equipment connected with the audio cable is not set to receive DVD The audio cables not connected are ? ? Connect the video cable into the jacks ? urn on the TV. Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. ?Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. The audio Select the appropriate video input mode on the TV so the picture from the DVD/ CD Receiver appears on the TV screen. ?T securely. playback picture securely securely. signal output. ? The the power cord wall outlet. Plug lit.) output. There is service. Cause Symptom No of connecting The disc is cable is damaged. dirty. ?T the equipment connected with the audio cable. ? ? No disc is inserted. ? urn on it with Replace new one. Clean the disc. Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) ? ? ? ? An unplayable The disc is placed upside The disc is not The disc is ?Amenu is disc is inserted. placed ? down. within the ? guide. dirty. on the TV ? ? ? screen. Insert disc. (Check the disc type, colour system and Regional code.) a playable Place the disc with the down. playback Place the disc on the disc tray inside the guide. side correctly Clean the disc. Press the SET UP button to turn off the menu screen. ? Loud hum heard. or noise is ? ? ? ? 28 The Rating The plugs level is set. and The disc is jacks are ? ?W them with a cloth tened with alcohol. dirty. dirty. The speakers and components connected poorly. Cancel the Rating function the rating level. ? are The DVD/CD Receiver is located too close to the TV. ? ipe or change slightly mois- Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. Refrnce tuning). ? No stations have been preset or preset stations have been cleared (when ? Preset the stations (page 25). tuning by scanning preset stations). The remote control does not work properly. ?T he remote control is not ? ? display ? remote sensor of the DVD/CD Receiver. ? The front panel is too dim. pointed at the ? The remote control is too far from the DVD/CD Receiver. There is an obstacle in the path of the remote control and the DVD/CD Receiver. The batteries in the remote control flat. Nothing display. is displayed on the front ? ? are ? panel ? Point the remote control at the remote sensor of the DVD/CD Receiver. Use the remote control within about 23 ft (7 m). Remove the obstacle. Replace the batteries with Press DIMMER on new ones. the remote control. 29 Specification Power Power Refer to main label Mass Gen ral External dimensions CD/ VD FM Tuner Refer to main label supply consumption AM [MW] (W x H x D) kg 360 x 56 Suplied Acesori Designs 30 310 mm Temperature: 5°C Laser Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL 625/50, NTSC 525/60 0.5 % Video output 1.0 V Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 30W+30W(6Ωat1kHz,THD10%) Front: 30W + 30W (THD 10 %) More than 75 dB status: Horizontal wavelength 650 nm (1 kHz, NOP-3dB, 20 kHz LPF/A-Filter) More than 80 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 108.0 MHz - 10.7 MHz 60 dB 140 522 - - (Mono) 10,000 Hz 1,620 kHz or 520 - 1,720 kHz 450 kHz Centre*: 30W Outputs MONITOR Surround*: 30W + Subwoofer*: 70W 1 Type Impedance Frequency Response 30W (8Ω (6Ω at 30 at 1 Hz, THD 10 %) Speaker (LHS-25SCS) Way 1 Speaker kHz, THD 10 %) Passive Subwoofer 1 Way 6Ω 160 Sound Pressure Level - H x D) 1 (LHS-25SCW) Speaker 8Ω 20,000 Hz 84 dB/W Rated x 35°C, Operation 140 Hz to 20 kHz (* Depending on the sound mode settings and the source, there may be no sound output.) Input Power Max. Input Power Net Dimensions (W Net Weight to 5% to 85% Satellite Speakrs x Operating conditions Operating humidity Surround mode Amplifer 2.5 (1m) 65 - 1,500 Hz 82 dB/W (1m) 30W 70W 60W 140W 92x115x80mm 160x350x280mm 0.5 kg 3.18 kg ?Speakers..........................6?Videocable.........................1 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 and specifications are subject to change without notice.