LH-T1000A NA6BBLS DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T1000 (Main Unit: LH-T1000A, Speakers: LHS-T1000T, LHS-T1000C LHS-T1000W) CD-R/RW Before repairing this product, booklet carefully and connecting up, operating please read completely. this instruction or P/N: 3834RH0056W Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. The exclamation mark within is intended to alert the user an equilateral triangle to the presence of important operating and maintenance (servicing) instructions in the instructions accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in such as a book case or similar unit. a confined space OTES ON COPYRIGHTS: It is forbidden CAUTION: This DVD/CD receiver To ensure proper use employs of this a Laser System. product, please read this owner's carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location (see service procedure). manual Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ___________________________________ ___________________________________ Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless", and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. 2 Table of Contents DVDAudioDiscs...........................23 Introduction Precautions.............................5 MovingtoanotherGROUP..............23 ViewinganotherPAGE.................23 Audio CD and MP3/WMA Disc Operation 24-25 24 Playing an Audio CD and MP3/WMA Disc .24 NotesonMP3/WMARecordings. NotesonDiscs..........................5 Pause.............................25 AboutSymbols..........................5 Front Panel Buttons and Display Window 6 MovingtoanotherTrack...............25 RepeatTrack/All/Off...................25 SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 . . . . . . . RemoteControlButtons.....................7 RearPanel................................8 . . Connections............................9-13 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. . . . . . . . . . AerialConnections.......................11 SpeakerSystemConnection...............12 SpeakerPositioning......................13 BeforeOperation.......................14-19 Mini Glossary for Audio Stream & Surround Mode.................................14 SoundMode...........................14 GeneralExplanation......................15 On-ScreenDisplay....................15-16 InitialSettings........................17-19 17 Initial Settings General Operation. Language..........................17 . . . . . . . . Picture.............................17 SpeakerSetup.......................18 Others.............................18 ParentalControl......................19 . . . . . . . . . . . . . . . Search.............................25 RepeatA-B.........................25 3DSurround........................25 .25 ChangingtheAudioChannel. JPEGDiscOperation......................26 ViewingaJPEGdisc.....................26 MovingtoanotherFile.................26 . Preparation . . . . . . . . . . . StillPicture.........................26 Toflipthepicture.....................26 Torotatepicture......................26 .26 NotesonJPEGRecordings. ProgrammedPlayback.....................27 Programmed Playback with Audio CD . . . . . . . . . . . andMP3/WMADisc......................27 .27 ProgrammedPlaybackwithVideoCD. SpeakerSetup............................28 . . . . . . AdditionalInformation...................28-29 LastConditionMemory...................28 SystemSelect..........................28 VideoMODESetting.....................28 UsingtheKaraokeFunction................29 RadioOperation..........................30 Presettingtheradiostations................30 Listeningtotheradio.....................30 OtherFunction...........................31 Operation SleepTimerSetting......................31 .20-23 Dimmer...............................31 Mute.................................31 GeneralFeatures........................20 UsingHeadphoneJack...................31 Selectinginputsource....................31 DVDandVideoCDOperation PlayingaDVDandVideoCD...............20 . . . . . . . . . . . MovingtoanotherTITLE/GROUP. Moving to another CHAPTER/TRACK . . . . . . . . . . . .20 . 20 Search.............................20 Pause.............................20 Still Picture and Frame-by-Frame Playback . 21 SlowMotion.........................21 RepeatA-B.........................21 Repeat............................21 TimeSearch........................21 3DSurround........................22 Zoom..............................22 MarkerSearch.......................22 SpecialDVDFeatures....................22 Reference LanguageCodeList.......................32 CountryCodeList.........................33 Troubleshooting........................34-35 Specification About the for instructions Indicates hazards itself or other likely to cause material damage. Indicates special operating Indicates tips TitleMenu..........................22 DiscMenu..........................22 symbols and hints for harm to the unit features of this unit. making the task easier. CameraAngle.......................22 .22 ChangingtheAudioLanguage. .22 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................22 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or you to locate it Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) play a only) or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number (8cm/12cmdisc) can video discs DVD video discs DVD audio discs In addition, this unit (DVD DVD-RW, DVD+RW, SVCD, CD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. enabling easily. Chapter (DVD video discs only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Group (DVD audio discs The main audio content only) or accompanying feature content or additional feature content, or music album. otes -- -- -- Depending the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. on Each group is enabling Track assigned group reference number a you to locate it easily. audio discs, Video CD and audio CD (DVD only) Sections of a picture musical or a audio CD. Each track is or an enabling piece assigned on a a video CD track number, you to locate the track you want. Scene On otes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions or supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the unit. Regional code of the DVD/CD receiver and DVDs This DVD/CD receiver is designed and manufactured for playback of region "5" encoded DVD software. The region code on the labels of some DVDs 5 indicates which type of player can play those discs. This unit can only play DVDs labeled "5" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. Types There of video CDs are two types of video CDs: Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc. To near radio, or turn off the use volatile such liquids, as leave marks Cleaning use a there may be a considerable temperature increase inside the car. light, as Cleaning discs Fingerprints or and dust the disc on reduce sound with a clean Before quality. cloth. Wipe distort the can playing, picture clean the disc the disc from the centre out- wards. on insecticide spray, or NO the unit Do not soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzene, YES the surface. To clean the cabinet a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- plastic products in long period of time. They will the unit. Do not leave rubber contact with the unit for a Use playing, the exterior surfaces clean keep Do not or discs or use thinner, are moistened with a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. " " may appear on the TV This icon means the function manual is not available About the disc Disc on Discs Handling DVD-A DVD Audio discs get on or tape on the disc. for instructions of the following symbol is represented by the symbol. Video CDs with the PBC (playback control) function. will not VCD1.1 Video CDs without the PBC (playback control) function. the surface. Do not stick paper screen one to the disc DVD Video discs Do not touch the Hold the disc during operation. explained in this owner's that specific DVD video disc. symbols DVD-V VCD2.0 playback side of the disc. by the edges so that fingerprints on A section whose title has applicable only Notes symbol display CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel Buttons and DISC Display Window DISPLAY Window Tray Microphone FUNCTION Jack VOLUME controller Microphone PHONES Volume Control connector OPEN/CLOSE Remote sensor OPEN/CLOSE MIC R MIC VOL STANDBY/ON MIN P/STEP MONO/ST. PLAY STOP/MEM. - TUNING FUNCTION + MAX DOWN TUNING red when the receiver is in Standby mode STOP/MEMORY (off). PAUSE/STEP/MONO/STEREO STANDBY/ON Indicates current PLAY TUNED indicator Repeat playback mode indicators surround mode (-/+)/ SKIP/SCAN STANDBY indicator Lights UP STEREO Programmed playback active Indicates current audio stream MUTE indicator indicator SLEEP Indicates current indicator player function: Playback, Pause, etc. DIGITAL PL II REPEAT dts PCM ALL AB SVCD TITLE CHP/TRK TUNED STEREO PROGRAM MUTE SLEEP DVD CD MP3 VCD Speaker indicators SVCD S-Video CD inserted ANGLE active DVD DVD video or DVD Indicates current audio disc inserted CD Audio CD inserted MP3 MP3 disc inserted VCD Video CD inserted 6 chapter number or track Total Indicates current playing time/Elapsed time/ Frequency/Sleep time/Surround title number mode/Volume etc. indicators Remote Control Buttons OPEN/CLOSE POWER AUX BAND CD/DVD MUTE DIMMER KARAOKE INTRODUC SLEEP NUMBER REPEAT A-B REPEAT SOUND MODE PROGRAM PRO LOGIC II CLEAR AUDIO VOLUME PRESET(+/-) (+/-) SUBTITLE ZOOM RETURN ENTER ARROW For use on a GUI in highlighting menu a selection DISPLAY screen, TITLE and MENU screen. STOP MENU Use the MENU button to the menu screen included PAUSE/STEP display on PLAY DVD SKIP/SCAN ( / ) Press and hold button for about two seconds for search function. video discs. SETUP TITLE Use the TITLE button to display the title on screen ANGLE included DVD video discs. SEARCH SLOW SCAN (Q / R) MARKER Remote Control Remote control Operation Range Point the remote control at the remote sensor and press sensor battery cover on the rear of the remote control, and insert two (7 m) from the front of the AAA AAA R03 (size AAA) batteries aligned correctly. remote sensor Angle: installation Remove the the buttons. Distance: About 23 ft battery with and About 30° in each direction in front of the remote Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Rear Panel POWER CORD SUBWOOFER LINE OUT Connector SPEAKER Connectors VIDEO 1 AUDIO Input (L/R) Connectors VIDEO 2 AUDIO Input (L/R) Connectors AUDIO OUT (L/R) Connectors MONITOR VIDEO OUT Connector COMPONENT VIDEO OUT/ PROGRESSIVE SCAN Connect to SUBWOOFER AUDIO MON TOR VIDEO OUT LINE OUT a (Y TV with Y Pb Pr COMPONENT VIDEO OUT (PROGRESSIVE SCAN) YP b Pr DIGITAL VID 88 48 8 8 OUT COAXIAL VIDEO OUT DIGITAL IN E O SPEAKERS COAXIAL DIGITAL IN Connector S-VIDEO OUT Connector VIDEO 1 (Input) Connector VIDEO 2 (Input) Connector VIDEO OUT Connector OPTICAL IN Connector OPTICAL OUT Connector AM Antenna Connectors FM Antenna Connector Do not touch the inner panel. Electrostatic damage to the unit. 8 pins of the jacks on the rear discharge may cause permanent Pb Pr) inputs. Connections Connecting Make the to a TV of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections described below. best connections. 1 Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly your TV. Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy input on connection high-definition or "digital ready" television, you may take advantage of the DVD/CD receiver's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD receiver. on Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the pro) 2 a Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD/CD receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). Connect the Left and Right AUDIO OUT jacks of the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables. protection system. ote -- Video connection 1 Connect the MONITOR OUT jack Receiver to the video in on video cable 2 jack supplied (V). the DVD on the TV using Set the Progressive to "On" on the setup progressive signal, see page 17. menu for the Connect the Left and Right AUDIO OUT jacks of the DVD/CD Receiver to the audio left/right in jacks on the TV (A) using the audio cables. S-Video connection 1 Connect the S-VIDEO OUT receiver to the S-Video in S-Video cable (S). Connect the Left and 2 the DVD/CD receiver on the TV Component 1 (A) using Video Right AUDIO OUT jacks of to the audio left/right in jacks the audio cables. (Color Stream ) connection Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN on receiver to the in using 2 jack on the DVD/CD jack on the TV using the an Y Pb jacks corresponding Pr cable (C). Connect the Left and the DVD/CD receiver on the TV (A) using the DVD/CD jacks on the TV Right AUDIO OUT jacks of to the audio left/right in jacks the audio cables. 9 PREATION Connections Connecting Connect 1 Connect 2 Connect 3 Connect 4 Connect 5 to (Continued) Optional Equipment a VCR to the VIDEO 1 connectors. a additional VCR to the VIDEO 2 connectors. of DVD an optical output an optical input an coaxial output of DVD of DVD Player (or Digital Player (or Digital Device Device Player (or Digital etc) Device to the OPTICAL IN connector. etc) to the OPTICAL OUT connector. etc) to the COAXIAL DIGITAL IN connector. VCR Additional VCR To VIDEO OUT OUT IN OUT IN To VIDEO OUT To VIDEO VIDEO INPUT AUDIO (L) AUDIO (R) To AUDIO To AUDIO To AUDIO/ OUT INPUT OUT To AUDIO To AUDIO IN OUT (VIDEO1) SUBWOOFER AUDIO MONITOR LINE OUT VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) YP b Pr DIGITAL V 88 48 8 8 SPEAKERS OUT COAXIAL DIGITAL IN OPTICAL OPTICAL OUT IN VIDEO OUT D E O ote If the audio format of the produce 10 a digital output strong, distorted sound does not match the or no sound at all. capabilities of your DVD/CD receiver, the receiver will Connections Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Connect the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. AM Loop aerial FM Wire aerial SUBWOOFER PREATION (supplied) AUDIO MONITOR LINE OUT VIDEO OUT (supplied) COMPONENT VIDEO OUT (PROGRESSIVE SCAN) YP bP r DIGITAL VID 88 48 8 COAXIAL 8 OUT VIDEO OUT DIGITAL IN E O SPEAKERS otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure to fully extend the FM wire aerial. After connecting the FM wire aerial, keep it as horizontal as possible. 11 Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible supplied speaker surround sound, cords. adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) Front speaker (Right) Center speaker SUBWOOFER AUDIO MONITOR LINE OUT 88 48 8 VIDEO OUT OUT COAXIAL 8 DIGITAL IN SPEAKERS Rear speaker (Right surround) Rear speaker (Left surround) If you feel lack of bass Subwoofer frequency: Connect an active subwoofer to the WOOFER OUT connector using a monaural audio cord (not supplied). When you connect an active subwoofer, disconnect the woofer from the SUBWOOFER speaker (Positioned at the connector. bottom) otes Be sure to match the speaker cable to the appropriate terminal the components: on + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, Do not remove the front cover of supplied speaker. Before 12 adjust the volume carefully connecting the AC power cord (mains lead) of this system to a wall outlet, to avoid excessive connect the speakers output to the on the system. speakers. Connections (Continued) Speaker Positioning In the case of normal position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the speakers for equal distance. And by hearing position set up the interval between Centre speaker The centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room size, if the audience is 90 than the listener 's - cm near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Front Speaker (Left) Centre Speaker Front Speaker (Right) Rear Speaker (Right) Rear Speaker (Left) Speaker Placement Example 13 PREATION Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. means identical to the A) By pressing SOUND MODE Each time you press SOUND MODE button, the sound mode is changed in the following order; PRO LOGIC TECHNO PLII MOVIE → PLII MATRIX BYPASS → ROCK CLASSIC → → → → PLII MUSIC POP → SOFT → LIVE → → DANCE 3D SURROUND → → ... ips The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. " button ROCK: Reproduces the acoustics of rock music. POP: Reproduces the acoustics of pop music. LIVE: Reproduces the acoustics of a 300-seat live. DANCE: Reproduces the acoustics of dance music. TECHNO: Reproduces the acoustics of techno " music. Use this mode when which carries the playing movie " " or Dolby Digital mark. This mode 2 channel CLASSIC: provides the effect being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynam- SOFT: Ideal for soft acoustic sounds. B) By pressing Dolby Pro Logic from two-channel sources. output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. → PLII MOVIE BYPASS → PLII MUSIC → ... (This function available 2-channel mode only) When DVD is inserted. change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Yo u can Each time you press AUDIO button, the sound mode of DVD is changed as the following order; MUSIC mode: The Music mode is for → PLII MATRIX II creates five full-bandwidth PL II button Each time you press PL II button, the sound mode is changed in the following order; PRO LOGIC (II) the acoustics of orchestral music. of ic than before. Reproduces →→→ use with any stereo music recordings. MATRIX mode: The Matrix mode is the same as the Music mode except that the logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the directional enhancement audio to mono. For your reference ? The DVD/CD Receiver memorizes the last mode settings ? for each individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. source - 3D SURROUND - produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel This unit can audio from a encoded with home theatre. This feature works with DVD discs Dolby Pro Logic and Dolby Digital audio tracks. BYPASS Software with multichannel surround audio according 14 to the way it was recorded. signals is played - otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). Sound Mode is not applicable when headphone is used. Before General This manual Operation (Continued) Temporary Explanation basic instructions for operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives the DVD/CD receiver is not available or on TITLE CHAPT GROUP TRACK General screen. playback 2 3 AB displayed on the TV changed on the menu. status can be Some items On-screen 1 Display can be display operation Press DISPLAY Repeat Repeat Chapter Repeat Group (DVD Repeat OFF audio discs Track (non-PBC only) Repeat All Tracks Repeat A-B only) Video CDs and DVD (non-PBC Video CDs only) Repeat Off Resume Action during playback. Title audio discs the disc. ALL On-Screen Feedback Field Icons play from this prohibited or point not available Notes Some discs may not Press 3/4 to select an The selected item will be Press 1/2 to change The number buttons numbers (e.g., title item. highlighted. the can provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. setting of an item. be also be used for number). press ENTER to execute the For some setting functions, setting. DVD-V Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of titles, and skips to the desired title number. 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio language and Digital Audio Output Sound D mode Subtitle language Angle 1 ENG 5.1 CH ABC Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Shows the elapsed playing time, and searches the point directly from the elapsed time. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Selection Method 1/2,or Numbers, ENTER 1/2,or Numbers, ENTER, SKIP Numbers, ENTER 1/2,or AUDIO OFF Shows the current subtitles language, and changes the setting. 1/1 Shows the current angle number and total number of angles, and changes the angle number. 1/2,or Shows the current sound mode, and changes the setting. 1/2,or BYPASS 1/2,or SUBTITLE ANGLE SOUND MODE 15 PREATION Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 Selection Method Shows the current group number and total number of groups, and skips to the desired group number. 1/2,or Numbers, ENTER Shows the current track number and total number of tracks, and skips to the desired track number. 1/2,or Numbers, ENTER Shows the elapsed playing time.(Display only) _ DVD Audio Output 1PPCM mode Shows the current encoding method, and channel number, and changes the setting. 5CH Subtitle language Page (or Angle) ABC OFF Shows the current subtitles language, and changes the setting. 1 /12 Shows the current page (or angle) number and total number of pages (or angle), and changes the page (or angle) number. 1/2,or AUDIO 1/2,or SUBTITLE 1/2,or ANGLE or 1/1 VCD2.0 VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track number, total number of tracks and PBC On mode, and skips to the desired track number. 1/4 Time 0:20:09 Shows the elapsed playing time (Display only) STER. Shows the audio channel, and changes the audio channel. Audio Channel Sound 16 BYPASS Shows the current sound mode, and changes the setting. Selection Method 1/2,or Numbers, ENTER -- 1/2,or AUDIO 1/2,or SOUND MODE Before Initial Yo u Operation (Continued) Picture Settings set your own Personal Preferences on the can player. TV Aspect Initial Settings General Operation appears. Scan Disc Subtitle English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Chinese Rating Polish Country Hungarian TV Other------------ Menu Code Aspect Language Scan Speaker Setup played cut off). Press 3/4 to select the desired item. as well as setting for the alternate setting(s). 3 your 4 Some require steps. SETUP, RETURN, 5 setup Press ENTER to confirm items selection. additional Press or PLAY to exit the menu. Language Language language 16:9 wide TV is connected. Aspect Language Scan Speaker Setup DVD-V Progressive Scan DVD-A Off Disc Subtitle On Disc Menu for the disc's Menu, Audio, and Rating The original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 32. If you enter the wrong language TV Original Disc Subtitle English Disc Menu French Rating German Code Country Progressive 5.1 Scan Speaker Setup Language Progressive Caution Spanish Once the Italian Aspect Scan Chinese Polish Hungarian Speaker Setup Other------------ Others Menu Language Select a for the setup menu. This is the when you press SETUP. language Disc Audio English Disc Subtitle Spanish Disc Menu French Rating German Country Language Others Disc Audio 5.1 Code Aspect Menu code, press CLEAR. Menu DVD-A Disc Audio Country TV DVD-V Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Subtitle. TV sides of the Others While the desired item is selected, press 2, then 3/4 to select the desired setting. see a style (Both will show the current screen selected item, you bars Code Progressive 5.1 : con- conventional TV set is back in that is Others Original masking Original 5.1 a a with Disc Audio Progressive Select images picture. style picture are Menu Disc standard 4:3 TV is connected. The video material formatted in the Pan & menu TV The a theatrical above and below the Press SETUP. The setup Displays 4:3 Panscan: Select when Country 2 DVD-A 4:3 Letterbox: Select when nected. 1 DVD-V Code menu setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Italian Aspect Menu Language 17 PREATION Before Operation (Continued) Speaker Setup 5.1 Auto Speaker settings DVD-V Play DVD-V DVD-A set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- You DVD-A Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 28.) can ed. mode is set to On, this DVD/CD receiver will search a title that playback time is longest and then If Auto Play back the title play automatically. On: Auto Play function is activated. Off: Auto Play function is not activated. Disc Audio Disc Subtitle R Disc Menu ote Front L Rating Country TV Code Volume Size Aspect Menu R Progressive Small Distance Language Scan The Auto 0dB 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press ENTER. The of the selected item is setting changed between On and Off. Disc Audio DRC On Disc Menu PBC On Rating Auto Disc Subtitle Country TV Off Code Aspect Menu Language Progressive 5.1 Play Scan Speaker Setup Others Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to audio digital technology. However, dynamic range of the you may wish to compress the audio output (the difference between the loudest sounds and the listen to at a of sound. Set quietest ones). Then, you may lower volume without losing clarity a movie DRC to On for this effect. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are CDs. 18 to On or Off. played according to the PBC. played the same way as Audio Play function may not work for some DVDs. Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD-V DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies the disc. These scenes on disc complete or scenes are Code Disc Audio rated are Country TV Menu Disc Menu 6 Scan Progressive Select 5 Rating Speaker Setup 2 Language Scan 1 Unlock Speaker Setup Follow step 3 of Change Others 3 Select 4 Shift 5 6 selection, "Rating" the first character 1 Select 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. "Rating" is selected, press 2. second personal 4-digit security password. then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already registered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER. cursor on left. using the 3/4 buttons. button and select the 3/4 buttons. Press ENTER to confirm your country code then press SETUP to exit the menu. ote Confirmation of the the code is 4-digit password changed (see "Changing is necessary when the 4-digit code" below.). Changing the 4-digit code If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. Follow 2 3 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Enter the old code, then press ENTER. Select Change using 3/4 buttons then press ENTER. 4 Enter the 5 Enter exactly the same fy by pressing ENTER. 6 Press SETUP to exit the Select a Ratings 1 to 8: Some discs contain scenes played. Higher rated scenes unless an alternative scene is available The alternative must have the lower If will not be same on rating 1-2 as shown above to the left new (Rating). then press ENTER. code a second time and veri- 4-digit code, menu. If you If you forget your 4-digit code the disc. your password, to clear the current password, follow the procedure below. or a 1 played suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. Steps not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be on 2. 1 Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. 5 using 2 character using the to create a 4 the 3/4 buttons menu. 3 Aspect Country Code using 1 the setup While Country Code is selected, press 2 4 Code Progressive 5.1 Language Others 7 Menu Code Aspect 8 Disc Subtitle TV PREATION BD Rating 5.1 Country were Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio whose standards Code Set Disc Subtitle The Parental Control feature allows country-dependent. country/area a used to rate the DVD video disc, referring to the list (See "Country Code List", page 33). to from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are DVD-V no Press ENTER to confirm your rating selection, then press SETUP to exit the menu. 2 forget Press SETUP to the setup menu. Use the Number buttons to enter the 6-digit number display "210499". The 3 4-digit password is cleared. Enter a new code as shown above to the left (Rating). ote This function may not work for some DVDs. 19 Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD-V General Features VCD2.0 DVD-A the TV and select the video input VCD1.1 ote source con- nected to the DVD/CD receiver. available Audio system: Turn on the audio system and select the input source connected to the DVD/CD receiver. 1 DVD-V 2 Load your chosen disc in the tray, with the playback side facing down. 3 Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and automatically. If playback press PLAY. In some cases, the disc menu When move The is or When displayed loading a MENU to return to the menu screen. 3 4 buttons to select want, then press ENTER to view the can VCD1.1 DVD-A option option. an a 1/3 title disc has more 1 /12 1/6 on a chapter/track disc has than one more than track, you one chapter can move or a to another follows: as > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/group/track. To go directly to any chapter during DVD playback, press you number VCD2.0 or using the numbered buttons chapter/track (0-9). ote Use the number buttons to select the track you want to view. Press RETURN to return to the setting the menu screen. and the exact operating procedures depending on the disc. may differ Follow the instructions on the each using you DISPLAY. Then, press 3/4 to select the chapter/group/track icon. Then, enter the DVD-A Use the 1 2 title/group, one to another CHAPTER/TRACK Press SKIP/SCAN . Use the 1 234 buttons to select the title/chapter you want to view, then press ENTER to start playback. or than appear may be displayed first after Video CD which offers a menu. Press TITLE more 1/6 to another title as follows: Moving DVD-V Menu disc has DVD-V menu screen DVD 1/3 DVD-A a menu. to another TITLE /GROUP 1 /12 a menu screen Setup playback instead. If the use Press DISPLAY, then press the appropriate number button (0-9) to select a title/group number. does not start, might on Moving Press OPEN/CLOSE to open the disc tray. starts Unless stated otherwise, all operations described the remote control. Some features may also be menu for menu screen. You also may set PBC to Off under setup. See page 18. For two-digit numbers, press (0-9)in rapid succession. Search DVD-V VCD2.0 the numbered buttons VCD1.1 1 Press and hold SKIP/SCAN . or > for about two seconds during playback. The receiver will now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the otes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized -- "Parental Control", DVDs may have a Your receiver will on page (see 19). regional code. not play discs that required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To return to normal have code different from your receiver. The for this receiver is 3 (three). regional regional code play, press PLAY. a ote When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments. Pause DVD-V VCD2.0 1 Press PAUSE/STEP 2 To return to 20 VCD1.1 during playback. playback, press PLAY. DVD and Video CD General Features Still Picture and VCD2.0 DVD-V DVD Audio Discs (continued) 1 To Frame-by-frame playback a during playback. The DVD/CD receiver will now go into PAUSE mode. advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote can 3 To return to normal play, The Repeat Group icon appears 3 To exit 2 To using a DVD audio disc that includes pictures, operation may be permitted in some picture The VCD1.1 1 Press SLOW SCAN m or M The player will enter SLOW mode. press REPEAT Repeat Off icon appears - on the TV screen. third time. a screen. Repeat Track/All/Off Repeat Track icon appears Repeat 3 To exit VCD2.0 Repeat mode, the TV on on the TV screen. during playback. All icon appears Repeat mode, the TV on screen. press REPEAT Repeat Off icon appears on the TV third time. a screen. ote On 2UsetheSLOWSCANmorMtoselectthe required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY. Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 18. a Time Search DVD-V 0:20:09 -:--:-- The Time Search function allows you to start any chosen time on the disc. ote Slow motion playback in is not reverse applicable a second time. segments. DVD-V screen. repeat the disc currently playing, press REPEAT The Slow Motion the TV repeat the track currently playing, press REPEAT. The When on second time. 1 To ote this Repeat Track icon appears Video CDs press PLAY. Repeat Track/Group/Off repeat the group currently playing, press REPEAT The control. - repeat the currently playing track, press REPEAT. The 2 To VCD1.1 1 Press PAUSE/STEP 2 You Operation 1 Press DISPLAY for play Video CD. appears on during playback. the The playing on-screen at dis- screen. The Time Search box shows the elapsed playing time of the current disc. Repeat A-B A* AB To repeat a VCD2.0 DVD-V OFF sequence in a title or A * " appears briefly on 2 Press REPEAT A-B the TV 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and group: 1 Press REPEAT A-B at your chosen " 2 Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. VCD1.1 starting point. in the box. If you enter the wrong numbers, press CLEAR to seconds from left to screen. at your chosen end point. "A B" appears briefly on the TV screen, and the repeat sequence begins ("AsB" appears the display window). again CHAPT 1/6 TITLE DVD Video Discs 1 To VCD2.0 DVD-V - remove the numbers you entered. Then enter the correct numbers. 4 Within 10 seconds, press ENTER to confirm the start time. starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. Playback 3 To cancel the sequence, press REPEAT A-B. Repeat right VCD1.1 TRACK ALL OFF Repeat Chapter/Title/Off repeat the currently playing chapter, press REPEAT. The 2 To Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press REPEAT a second time. The Repeat Title icon appears 3 To exit The Repeat mode, on the TV screen. press REPEAT Repeat Off icon appears on the TV a third time. screen. 21 OPERATION DVD and Video CD General Features 3D Surround (continued) VCD2.0 DVD-V Operation 3 4 3D Surround effect, which simulates multi-channel audio playback from two This unit produce can speakers, instead of the speakers normally required to listen to five more multi- channel audio from home theater system. 1 Press SOUND MODE to select "3D SUR" 5 or a during play- back. VCD2.0 or still playback to acti- 1 Press TITLE. steps. If the current title has move the zoomed through picture. the normal resume playback or menu can and subtitle return to 3 To zoom function may not work for some DVDs. DVD-V VCD2.0 VCD1.1 You can start playback from a memorized nine points can be memorized. To enter a mark, follow these steps. 2 To point. Up to During disc playback, press MARKER when playback reaches the spot that you want to Repeat step on the TV menu is displayed. the disc menu, press MENU remove again. 1 to enter up to nine Marker To Recall a points on a Marked Scene disc playback, The MARKER SEARCH will appear the on 2 Within 10 seconds, press 1/2 to select number that you want to recall. will start from the Marked a Marker Changing scene. on the Subtitles screen. Press 1/2 to select the Marker number that you want to erase. 1 ENG the display. Language D 1PPCM 5.1 CH 5CH the Audio Channel VCD2.0 repeatedly during playback to hear channel (STER., LEFT or RIGHT). DVD-V DVD-A Press SUBTITLE repeatedly different subtitle languages. To clear a Marked Scene 1 During disc playback, press SEARCH. will appear Changing ferent audio SEARCH. menu DVD-A the Audio on Press AUDIO 4 To remove the MARKER SEARCH menu, press The MARKER SEARCH angle appears to select a a dif- screen. 3 Press ENTER. Playback recorded at different camera to a different camera angle scenes Press AUDIO repeatedly during playback to hear ferent audio language or audio track. press SEARCH. menu 1/1 DVD-V Angle If the disc contains DVD-V 22 again. DVD-V briefly. screen disc. 2 and The number of the current The Marker icon will appear During angles, spoken language chapters for the title. camera angles, you can change during playback. Press ANGLE repeatedly during playback desired angle. memorize. 1 may appear. 1 Press MENU. Camera 2 menu MARKER SEARCH 1/9 1 menu, the menu will appear on the the title menu, press TITLE remove The disc Marker Search list options, Disc Menu ote a Otherwise, the disc screen. 2 The paused image. The DVD-V Title Menu repeatedly, the magnification level 2 Use the 1 234 buttons to 3 Press CLEAR to the contents of DVD Video press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. vate the Zoom function. If you press ZOOM increases up to six Special DVD-V DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, VCD1.1 during playback DVD Features discs: Menus The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM To remove the MARKER SEARCH menu, press SEARCH. Checking 2 To turn off the 3D Surround effect, press SOUND MODE again to select "BYPASS". DVD-V 2 and 3 to erase additional Marker Repeat steps numbers. a conventional stereo Zoom The Marker number will be erased from the list. 3D SUR BYPASS VCD1.1 Press CLEAR. ABC VCD1.1 a dif- 1 ENG during playback to see the ote If appears, the feature is not available on the disc. DVD and Video CD DVD Audio Discs Operation DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is a new disc format building on the success of DVD to provide high quality, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). A can DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is used typical lot of content, there what's available on the disc. can hold DVD-A 1 /12 a various ways to see 1 Press DISPLAY during are 2 Press 3/4 to select 3 Press 1/2 to select playback. Page icon. a page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. ote Since the the the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. for music, either Advanced Resolution multi-channel sound quality that is closer to the artist's master record- ing or for contain longer recordings. Many DVD Audio discs text, such as artist biographies, lyrics. Some DVD Audio discs contain photo on-screen playlists, galleries or or video clips. ote If you the DIGITAL OUT (OPTICAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. use Moving to another GROUP 1/6 DVD-A Some DVD Audio discs divide content into different groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1 Press DISPLAY 2 Press 3/4 to during playback select Group icon. 3 Press 1/2 the numbered buttons or on in stop mode. (0-9) to select a group number. ote Sometimes the author of the disc creates hidden tent that can only be accessed If the lock icon appears by entering a con- password. the TV screen, enter the you'll find it on the disc's jacket on password (sometimes cover or on a web site). This password control isn't dicit is a function of the tated by your DVD/CD receiver --- disc. Since the the the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. 23 OPERATION Audio and MP3/WMA Disc Playing CD an Operation Audio CD and MP3/WMA Disc MP3 MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes MP3/WMA Recordings on right. Insert Audio 1 on MP3/WMA An MP3 file is audio data play can disc and close the tray. CD; Audio CD menu appears compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio files that have on The player can not read an MP3 file that has a file extension other than ".mp3". a on About the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen WMA(Window Media Audio) An WMA file is a technology. WMA(Windows compression of MP3 WMA JPEG MP3/WMA Disc Microsoft audio Media Press 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen. Press RETURN to choice menu. move 1. 2. to the MP3/WMA-JPEG compatibility Folder1 Folder2 Folder3 Folder4 Folder6 Folder7 Clear All 5. 3 Press 3/4 to select a folder, and ENTER. A list of files in the folder appears. 4 Press 3/4 to select ENTER. a A single session disc track then press PLAY the disc or 6. to the next page. move to the File names Program incorporate ".mp3" e.g. "********.MP3" Program MP3 WMA TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK05 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 STER. Audio CD BYPASS menu Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than Clear All TRACK 8.mp3 00:00 requires discs/recordings list, use in 1 MP3/WMA OFF menu 24 file list and want to return to the Folder the 3/4 to return to the 5 a To stop and highlight previous menu screen. playback at any other to meet Pre-recorded DVDs are optimal automatically set to these standards. There are many different ip are ".wma" extension "********.WMA". press ENTER to (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. required permission is in order to download MP3/WMA files and music from the Internet. Our company has no to grant such permission. Permission should always time, press STOP. types of recordable disc formats Customers should also note that If you less 7. playback quality. TRACK 4.mp3 0: 56: 18 or certain technical standards in order to achieve TRACK 3.mp3 Clear All or 8 letters previous page. TRACK02 TRACK08 or using 650. TRACK01 TRACK04 MP3/WMA file in the 1st should be named This DVD/CD receiver CD no MP3/WMA files in the or use a new one. and must move requires track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in the current track's elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. Press MENU to - first track. If there is Playback starts. During playback, Press TITLE to Sampling Frequency / only at 44.1kHz (MP3), 32 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback system. OFF 00:00 follows: MP3/WMA files. We recommend that you use "Easy-CD Creator", which creates an ISO9660 file Folder5 Folder8 as with this DVD/CD - 4. Program offers double the audio - 3. MP3 WMA Audio) compression the MP3 format. receiver is limited 2 Recordings About MP3 WMA The DVD/CD receiver Notes be sought from the copyright owner. right Audio and MP3/WMA Disc Pause CD MP3 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or press The Moving Press SKIP/SCAN . or > playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice the previous track. In CD MP3 WMA briefly during or to return to the briefly step back to to of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) case during playback. Repeat 1 To Track/All/Off CD MP3 WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on menu screen. 2 To on a disc, press REPEAT Repeat icon and "A 2 Press REPEAT A-B * " appears the on menu screen. at your chosen end point. The Repeat icon and "A B" appears on the menu screen, and the sequence begins to play repeatedly. again 3 To exit the sequence and return to normal REPEAT A-B again. The Repeat icon and "OFF" appears 3D Surround on the play, press menu screen. CD This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. 1 Press SOUND MODE to select "3D SUR" during play- a sec- ond time. Repeat icon and "ALL" appears on the menu screen. Repeat mode, press REPEAT a third time. The Repeat icon and "OFF" appears on the menu screen. 3 To cancel Search starting point. back. repeat all tracks The CD To repeat a sequence. 1 During disc playback, press REPEAT A-B at your chosen to another Track A-B CD MP3 Changing the Audio Channel CD Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT). WMA 1 Press and hold SKIP/SCAN . two seconds The player will 2 To turn off the 3D Surround effect, press SOUND MODE again to select "BYPASS.". or > for about during playback. now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY. 25 OPERATION JPEG Disc Viewing Operation JPEG disc a Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert to another File Moving JPEG can disc and close the tray. The MP3/WMA-JPEG choice menu appears TV screen. on the during viewing a to the previous file. once to advance to the next file or picture Still Picture 1 Press PAUSE/STEP a > or during The DVD/CD receiver will slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. now MP3 WMA To JPEG 2 Press 3/4 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press ENTER. The JPEG menu appears on the TV flip the picture to flip the screen. To rotate JPEG Press 1/2 Folder1 Folder2 during showing clockwise picture Folder3 picture or a picture to rotate the counter clockwise. Folder4 Folder5 Folder6 Folder7 Notes Folder8 Slide Speed on JPEG Recordings Off upon the size and number of the JPEG files, it could take a long time for the DVD/CD receiver to read the disc's contents. If you don't see an on- Depending 3 Press 3/4 to select a folder, and ENTER. A list of files in the folder appears. Press RETURN to move to the MP3/WMA-JPEG choice menu. ip If you list, " are in a file list and want to return to the Folder the 34 buttons on the remote to highlight menu screen. If you want to view a particular file, press 3/4 to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts. file, press RETURN to During viewing the previous menu (JPEG menu). a Press TITLE to move to When you are using software such as "Easy CD Creator" to burn the jpeg files into the CD-R, ensure that all the selected files have the when copying move Folder1 Picture1 Picture2 Picture3 Picture4 Picture5 Picture6 Picture7 1024X768 Slide Speed Off 5/32 1024X768 Picture5.jpg ip viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide Speed then press 3/4 to select the option you want to There are three use, and press ENTER. 5 To stop viewing at any other time, press STOP. The JPEG menu appears. 26 into the CD ".jpg" extensions layout. If the files have File them names ".jpe" or ".jpeg" extensions, please as ".jpg" files. without by files shown are ".jpg" extension will not be able to this DVD/CD receiver. Even be read explorer. 5/32 the disc should be less than 650. rename to the next page. Press MENU to move to the previous page. JPEG on Some disc may be incompatible due to different recording format or condition of disc. and press ENTER to return to the previous 4 --- Total number of files and folders use " display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen as JPEG image though the files in windows Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program On Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 18. a contain 30 tracks. can Press PROGRAM mode to enter during playback or in the Program Edit mode. the stop E mark will appear to the right of the word the right side of the menu screen. The on with Video CD ote Program 1 WMA Programmed Playback and MP3/WMA Disc The MP3 OPERATION contain 30 tracks. can Insert Video CD and close the tray. 1 Program 2 Press PROGRAM while The VCD Program menu playback is stopped. will appear. ote Press PROGRAM to exit the E the mark will Program Program VCD Edit mode; E TRACK 1 TRACK 2 disappear. TRACK 3 TRACK 4 TRACK 5 Select track, then press ENTER a 2 selected track on 3 Repeat step 2 Program list. to the Program place to place TRACK 6 the TRACK 7 list. additional tracks on the ote Press RETURN Program CD TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 3 TRACK 10 TRACK 4 TRACK 3 E TRACK 5 TRACK 1 E TRACK 2 TRACK 2 TRACK 4 TRACK 3 TRACK 3 TRACK 4 TRACK 6 TRACK 7 TRACK 7 Clear All STER. Audio CD BYPASS menu 00:00 3 MP3/WMA OFF 3 4 To playback from programmed playback, press PROGRAM. resume normal Repeat Programmed programmed track you selected last is highlighted Tracks on To repeat the track currently playing, Repeat icon and "TRACK" appears The press REPEAT. on the menu Press 3/4 to select the track you want to start screen. Press TITLE to To repeat all tracks on the program list, press REPEAT a second time. 5 playing. to the next page. Press MENU to move to the previous page. move 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks have played once. on the Program list playback from proplayback, select a track of CD resume grammed MP3/WMA) Repeat icon and "ALL" appears on the menu screen. To cancel Repeat mode, press REPEAT a third time. The Repeat icon and "OFF" appears on the menu screen. The Press PLAY to start. To menu. "PROG." indicator disappears in the display window. menu the program list. 7 Program Follow steps 2-6 of "Programmed Playback with Audio CD and MP3/WMA disc" on left. Clear All TRACK 8 Press 2. The PROGRAM to exit the or TRACK 8 TRACK 6 0: 56: 18 4 Program MP3 WMA TRACK 5 TRACK 8 Clear All TRACK 8 a Track from Program List 1 Press PROGRAM MP3/WMA disc normal list and then press ENTER. "PROG." indicator disappears on the menu screen. Erasing (or Program E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Program list. Complete Program 1-2 of "Erasing a List Track from Program above. 2 Use 3/4 to select "Clear All", then press ENTER. The complete Program for the disc The programs are will be erased. also cleared when the disc is removed. 27 Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio Disc Menu Country TV Code Volume 0dB Size Aspect Menu R Front L Rating Progressive Scan tings memorized, ly recalled. Small Distance Language VCD1.1 This DVD/CD receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its set- Disc Subtitle R CD Memory 1 ft Test the latest stop position is automatical- Return 5.1 otes Speaker Setup Others -- -- 1 Select "5.1 Speaker Setup" using buttons the setup 2 While "5.1 on the 3/4 is selected, press 2 Speaker Setup" Press 2 buttons to select the desired 3 Adjust options by using 4 Select are menu. button. Speaker stored in memory for use any time. This DVD/CD receiver does not memorize settings of a disc if you switch off the DVD/CD receiver before commencing to play it. Settings speaker. 341 2 buttons. Select System You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP on the front panel or remote control for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO). When the selected system does not coincide with the system of your TV, normal colour picture may not be selection speaker that you want to adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)) displayed. a Volume AUTO: Select when DVD/CD receiver is connected with Multi system TV. NTSC: Select when DVD/CD receiver is connected with NTSC-TV. Press 1 / 2 to adjust the output speaker. (-6dB +6dB) level of the selected Select when DVD/CD receiver is connected PAL: ~ with PAL-TV. Size Since the speaker settings settings. the are fixed, you cannot change Video Mode , sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the time. can (1 ft = 30.48 the video mode, press and hold DISPLAY for 3 seconds during playback of a disc. Changed cm) To not set the distance of subwoofer Press ENTER to test the signals displayed on the TV screen. Check whether video quality is improved. You can repeat above procedure until desired picture quality speaker. memorized in the Front Left (L) Right (R) appears. of each the volume to match the volume Rear change video mode number is Test Adjust VCD1.1 mode. ote You VCD2.0 playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In that case, the picture quality can be improved with changing video If you connected speakers to your DVD/CD receiver setting the Distance lets the speakers know how far the same DVD With certain discs, the Distance listener at the Setting speaker. of test signals Procedure of video mode is MODE1 system. → Centre → → Front Rear Left (L) Right (R) → → MODE2 → MODE3 changed; → MODE1 If you turn off the the power, the video mode will be back to initial state (MODE1). → Subwoofer Return Press ENTER to return to the previous ote menu. -- This function available when the Progressive Scan to "On" on the setup menu for progressive signal, see page 17. 28 Additional Using 1 2 Information(Continued) the Karaoke Function Load a 8 karaoke disc. 3 ( 3.5mm). a microphone Press PLAY to start Adjust MIC VOL melody, 5 song. playback. If you want to set KARAOKE 6-8. Press KARAOKE 6 KARAOKE menu option a display changes as desired item (ECHO, EFFECT). Voice1 V2 Voice2 Voice2 V1+V2 Voice1 Voice2 Off None voice None voice Karaoke Special Effects. Each time Special Effect changes as can use pressed, → the HARMONY KEY: You can → FLANGE change the → CHORUS key by pressing the 1/2 buttons. shown in the chart below. 9 (DVD Output speaker Right speaker shown below. Off or Left voice you desire. Voice1 EFFECT: You appears. 7 KEY, VOICE, MELODY a duet with the recorded a follow steps during playback. an sing V1 1/2 is Use 3/4 to select The Voice Select sing by set MELODY to Off. VOICE: If you wish to karaoke singer, select to MIC socket. control and then the echo volume MELODY: If you wish to sing only to the backing band or orchestra unaccompanied by a vocal guide level to prevent acoustic feedback (e.g. a loud howling sound) before connecting the Connect adjust can the 1/2 buttons. pressing Set the MIC VOL control to the minimum value of the item adjust selected. ECHO: You microphone. 4 Use 1/2 to Press KARAOKE to exit the KARAOKE menu. Disc) Notes The microphone may back. (ex. slow) not be available The karaoke feature functions only during special play- with karaoke-compatible discs. The VOICE and MELODY some menus may not be available on karaoke discs. ECHO, EFFECT and KEY function may be operated on CD, other disc (except DVD disc) and external input source (Analogue). When you using a microphone, the signal is output from the Front L/R speakers. For more details, refer to the information supplied with the The disc. (VCD Karaoke Disc) 29 OPERATION Radio Operation the radio stations Presetting You can tuning, preset 30 stations for FM and AM (MW). Before make sure that you have turned down the vol- Preset radio stations in the DVD/CD receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 on the remote control or to the radio Listening 1 press Press the remote control BAND on FUNCTION repeatedly on AM FM or AM The last received station is tuned in. 2 And then every time you press BAND, FM and AM (MW) changes alternately. 3 Press and hold TUNING or on the front panel for about two seconds frequency indication starts to change, when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the (for a program) stereo display window. panel until display window. FM appears in the repeatedly to select the pre- set station you want. Each time you press the button, the DVD receiver tunes in one 3 then or Press PRESET +/- until the release. Scanning stops 2 (MW) press the front FUNCTION repeatedly on the front panel until (MW) appears in the display window. or preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To turn off the radio Press POWER to turn the DVD/CD receiver off another function mode (CD/DVD, VIDEO1 or or select VIDEO2). ote "TUNED" appears when the only signal is FM and STEREO. 4 Use manual Press STOP/MEM. A on Press TUNING 6 7 the front For manual panel. preset number will flash in the display window. 5 panel or to select the Press STOP on on on the front preset number you want. the front panel again. the front or automatic tuning in step 2. tuning, press TUNING panel repeatedly. For automatic tuning, or press and hold TUNING for about two seconds or on the front panel. The station is stored. To select Repeat steps 3 to 6 to store other stations. You preset radio station directly a can use the number buttons on to select a To tune in a station with Press TUNING a weak or to tune in the station signal repeatedly in step 3 manually. "CLEAR ALL" is appeared in the display window and STOP/MEM. again, the stations are cleared. If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to normal mode. ote If all stations have been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. change above. 30 then 9 (within 3 seconds). For your reference To improve reception Press and hold STOP/MEM. for about two seconds and then press the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 To clear all the stored stations To To listen to non-preset radio stations already the preset number, follow the steps 5-6 as Reorient the supplied antennas. Other Function Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a Setting specified Selecting input can use VCRs or other units connected to the VIDEO1, VIDEO2 connectors, Coaxial time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. 2 You source Each time you press SLEEP the setting changes in the following order. SLEEP 90→80→70→60→50→40→30→20→10→ OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. Optical connector or connector. Refer to the owner's manual with the unit for further information Press AUX select the on the repeatedly on the remote desired input source. supplied operation. control to Each time you press this button, the mode of the function changes in the following sequence: VIDEO 1: for selecting the analog signal from VIDEO1 AUDIO IN (L/R) & VIDEO 1 IN Connectors. VIDEO 1 OPT: for selecting the optical digital signal from VIDEO 1 IN & OPTICAL IN Connector. VIDEO 1 COAX: for selecting the coaxial digital signal from VIDEO 1 IN & COAXIAL IN Connector. Dimmer VIDEO 2: for selecting the analog signal from VIDEO2 AUDIO IN (L/R) & VIDEO 2 IN Connectors. This function will change the brightness of the display window on the front panel during in power-on status. VIDEO 2 OPT: for selecting the optical digital signal from VIDEO 2 IN & OPTICAL IN Connector. Press the DIMMER VIDEO 2 COAX: for selecting the coaxial digital signal from VIDEO 2 IN & COAXIAL IN Connector. repeatedly. Mute Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. Using Headphone Jack Connect a stereo headphone PHONES connector. The plug ( 3.5mm) into the speakers are automatically disconnected plug in a headphone (not supplied). otes The Optical input function is available only when other unit's Sampling Frequency is 32 48kHz. You can also select the input source by pressing FUNCTION repeatedly on the front panel. the ~ when you 31 OPERATION Language Code List Enter the appropriate (See page 17). code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 32 Country Enter the Code List appropriate code number for the initial setting "Country Code" (See page 19). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and Barbuda FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM SV El Salvador BB Barbados GI Gibraltar MN Myanmar Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF French Southern BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP Japan PL Poland VI Virgin Islands (British) Virgin Islands (USA) CX Christmas Island KE PM Saint Pierre and VN Vietnam CY Cyprus KG Kenya Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands DE Republic Georgia & S. Sandwich (USA) Anguilla Mayen Islands Republic Principe Territories (French) Tobago Kingdom USA Minor Outlying Islands Miquelon (French) City State Grenadines 33 REF NC Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD receiver does not work. picture. ? Correction The power cord is disconnected. ? No disc is inserted. ? ? The TV is not set to receive DVD signal ?T he video cable is not connected ? ? securely. sound or only a very low-level sound is heard. ? The equipment connected with the audio cable is not set to receive DVD ? The audio cables not connected are ? securely. ? ? playback picture is poor. The DVD/CD receiver does not start playback. into the Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is ? ? Connect the video cable into the jacks urn on the TV. Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD receiver. Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. The audio Select the appropriate video input mode on the TV so the picture from the DVD/ CD receiver appears on the TV screen. ?T signal output. ? The securely securely. ?T he connected TV power is turned off. no the power cord wall outlet. Plug lit.) output. There is service. Cause Symptom No of connecting The disc is cable is damaged. dirty. ?T the equipment connected with the audio cable. ? ? No disc is inserted. ? urn on Replace it with new one. Clean the disc. Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) ? ? An unplayable The disc is placed upside ?T he disc is not ? The disc is ?Amenu is disc is inserted. placed ? down. within the ? guide. dirty. on the TV ? ? ? screen. Insert a playable disc. (Check the disc type, colour system and Regional code.) Place the disc with the down. playback Place the disc on the disc tray inside the guide. side correctly Clean the disc. Press the SETUP button to turn off the menu screen. ? Loud hum heard. or noise is The ?T he ? ? Rating plugs level is set. and The disc is jacks are ? ?W them with a cloth tened with alcohol. dirty. dirty. The speakers and components connected poorly. ? are ?T he DVD/CD receiver is located too close to the TV. 34 Cancel the Rating function the rating level. ? ipe or change slightly mois- Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. tuning). ? No stations have been preset or preset stations have been cleared (when ? Preset the stations (page 30). tuning by scanning preset stations). The remote control does not work properly. ?T h er emote control is not ? ? The front panel is too dim. display at the ?P oint the remote control at the remote remote sensor of the DVD/CD receiver. ? The sound mode or Pro Logic II mode cannot be changed. pointed The remote control is too far from the DVD/CD receiver. There is an obstacle in the path of the remote control and the DVD/CD receiver. The batteries in the remote control flat. ?T he ing ? system a MP3 Nothing display. is cannot or are while play- the front panel change sensor ? ? ? ? of the DVD/CD receiver. Use the remote control within about 23 ft (7 m). Remove the obstacle. Replace the batteries with Insert such a new ones. CD disc. WMA disc. displayed on ? Press DIMMER on the remote control. 35 REF NC Specification Power Power [Genral] Refer to main label supply consumption Refer to main label Mass External dimensions [CD/VD] (W x H x D) [Tuner] [MW] 55 x 350 at the bottom cover) cover) mm Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 to 35°C, Operation status: Horizontal 5% to 85% 650 wavelength nm 150 Hz to 18 kHz More than 70 dB 20 kHz (1 kHz, NOP, LPF/A-Filter) More than 70 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 0.5 % Video output 108.0 MHz Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 60W+60W(8Ωat1kHz,THD10%) Front: 60W + 60W (THD 10 %) - or 65.0 74.0 MHz, 87.5 - - 1 108.0 MHz 10.7 MHz 60 dB 150 - 522 - (Mono) 8,000 Hz 1,611 kHz 530 or - 1,610 kHz 450 kHz Surround mode [Amplifer] x Laser Component AM 430 Temperature: 5°C S-video output [FM] kg Operating conditions Operating humidity Video output [Video] 4.6 at the bottom (labeled (labeled (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 60W Surround*: 60W 60W + Subwoofer*: 120W kHz, THD 10 %) at 1 (8Ω Hz, THD 10 %) VIDEO 1, VIDEO 2, COAXIAL AUDIO, OPTICAL AUDIO, MIC Inputs Outputs (4Ω at 30 VIDEO OUT (AUDIO OUT) PHONES: (32 Ω, 0.8 V) : 2 V OPTICAL AUDIO Satellite Speaker Centre speaker (LHS-T1000T) Type Impedance Frequency Response [Speakrs] [Suplied Acesori ] Designs 2 Max. 110 Net (W x H Speaker x - 2 Way D) 2 Speaker (LHS-T1000W) 1 Way (1m) 110 20,000 Hz - 84 dB/W 1 Speaker 4Ω 8Ω 20,000 Hz 84 dB/W Input Power Input Power Net Dimensions 2 (LHS-T1000C) 8Ω Sound Pressure Level Rated Way Passive Subwoofer (1m) 40 - 1,500 Hz 82 dB/W (1m) 60W 60W 120 W 120 W 120 W 240 W 110x140x117mm 210x110x117mm 244x422x321mm 0.8kg 1.0kg 6.5kg Weight ?Speakers...........................6?Speakercables......................6 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 and specifications are subject to change without notice.