LG | LH-T6440A | LG LH-T6440A Owner’s Manual

LH-T6440A NA3SCLS
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T6440
(Main Unit: LH-T6440A,
Speakers: LHS-T6440T, LHS-T6440C,
LHS-T6440W)
CD-R/RW
Before
connecting up, operating or repairing this
read this instruction booklet carefully and
please
completely.
product,
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
Laser
System.
product, please
read this
OTES ON COPYRIGHTS:
owner 's
manual
unit
tion
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous radi-
other than those
ation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
to others. You should
retain this
Model No.
Serial No.
2
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
Operation with Audio CD and MP3/WMA Disc.
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
24-25
.
.
.
.
.
.
.
.
.
24
.24
Pause.............................25
MovingtoanotherTrack...............25
RepeatTrack/All/Off...................25
Search.............................25
RepeatA-B.........................25
3DSurround........................25
.
RemoteControloverview....................7
RearPanel................................8
Preparation
.25
ChangingtheAudioChannel.
OperationwithJPEGDisc...................26
ViewingaJPEGdisc.....................26
MovingtoanotherFile.................26
.
.
.
.
.
.
.
.
.
.
StillPicture.........................26
Connections............................9-13
TVConnections.........................9
OptionalEquipmentConnections
.
.
.
.
.
.
.
.
.
.
.10
AerialConnections.......................11
Toflipthepicture.....................26
Torotatepicture......................26
.26
NotesonJPEGRecordings.
ProgrammedPlayback.....................27
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
.
SpeakerSystemConnection...............12
SpeakerPositioning......................13
BeforeOperation.......................14-19
Mini Glossary for Audio Stream & Surround
.27
ProgrammedPlaybackwithVideoCD.
SpeakerSetup............................28
Mode.................................14
AdditionalInformation.....................28
SoundMode...........................14
LastConditionMemory...................28
SystemSelect..........................28
OperationwithRadio......................29
Presettingtheradiostations................29
Listeningtotheradio.....................29
GeneralExplanation......................15
On-ScreenDisplay....................15-16
InitialSettings........................17-19
Initial Settings General Operation.
17
Language..........................17
.
.
.
.
.
.
.
.
andMP3/WMADisc......................27
.
.
.
.
.
.
OtherFunction...........................30
Picture.............................17
SleepTimerSetting......................30
SpeakerSetup.......................18
Dimmer...............................30
Others.............................18
Mute.................................30
ParentalControl......................19
UsingHeadphoneJack...................30
Selectinginputsource....................30
Operation
.20-23
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............20
.
.
.
.
.
.
.
GeneralFeatures........................20
MovingtoanotherTITLE/GROUP.
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.20
.
20
Reference
LanguageCodeList.......................31
CountryCodeList.........................32
Troubleshooting........................33-34
Specification.............................35
Search.............................20
Pause.............................20
Still Picture and
Frame-by-Frame Playback
.
21
About the
symbols
for instructions
SlowMotion.........................21
Indicates hazards
RepeatA-B.........................21
Repeat............................21
itself
TimeSearch........................21
Indicates
special operating
Indicates
tips
or
likely to cause
damage.
harm to the unit
other material
features of this unit.
3DSurround........................22
Zoom..............................22
MarkerSearch.......................22
SpecialDVDFeatures....................22
TitleMenu..........................22
DiscMenu..........................22
CameraAngle.......................22
.22
ChangingtheAudioLanguage.
.22
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................22
DVDAudioDiscs........................23
and hints for
making
the task easier.
Manufactured under license from
Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
MovingtoanotherGROUP..............23
ViewinganotherPAGE.................23
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
(8cm/12cmdisc)
or
you to locate it
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
play
a
DVD-RW, DVD+RW,
Kodak PICTURE CD, SVCD and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
otes
Depending
or
itself,
some
cannot be
--
--
on
the conditions of the
the CD-R/RW
ment
CD-R/RW
played
on
recording equip(or DVD-RW, DVD+RW) disc
(or DVD-RW, DVD+RW) discs
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
CDs
or
malfunctions.
use irregularly shaped
octagonal). It may result in
only)
accompanying
feature content
enabling
easily.
Chapter (DVD video discs only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
audio discs
Group (DVD
The main audio content
or
only)
accompanying
feature
additional feature content, or music album.
Each group is assigned a group reference number
content
--
or
additional feature content, or music album.
Each title is assigned a title reference number
(8cm/12cmdisc)
can
video discs
The main film content
DVD audio discs
In addition, this unit
(DVD
DVD video discs
or
enabling
Track
you to locate it
(DVD
audio
easily.
discs, Video CD and audio CD
only)
(the
Sections of
(e.g., heart-shaped
a
picture
or a
musical
audio CD. Each track is
or an
enabling
piece
assigned
on a
a
video CD
track number,
you to locate the track you want.
Scene
otes
Some
on
On
DVDs and Video CDs
playback operations
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
some
or
designed by the software manufacturer,
playback features of the unit may not be available
other functions may be added.
sure to also refer to the instructions
Make
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
played
on
the
unit.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
PBC
code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is
designed and manufactured for
playback of region "3" encoded DVD software.
The region code on the labels of some DVDs
3
indicates which type of player can play those
discs. This unit can only play DVDs labeled "3"
or "ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
4
two
types of video CDs:
Video CDs
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
Regional
and still
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be disturbed
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
or
turn off the
volatile
liquids,
contact with the unit for
leave marks
Cleaning
such
a
use a
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
a
insecticide spray,
as
or
long period
plastic products in
of time. They will
the surface.
on
the unit
To clean the cabinet
Use
Cleaning
temperature
the exterior surfaces clean
use
the unit. Do not leave rubber
near
radio,
or
as there may be a considerable
increase inside the car.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzene,
or
use
thinner,
are
moistened with
lightly
strong
as
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD Receiver is
a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
If the
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD-V
DVD-A
Disc
Handling
Do not touch the
Hold the disc
get
on
by
VCD2.0
playback
edges
the
that
fingerprints
will not
VCD1.1
or
tape
on
the disc.
symbols
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD Video discs
DVD Audio discs
Video CDs with the PBC
(playback control)
Video CDs without the PBC
(playback control)
function.
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
screen
function.
side of the disc.
so
on
A section whose title has
applicable only
Notes
symbol display
"
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
STANDBY indicator
OPEN/CLOSE button
Lights red when the receiver
is in Standby mode (off).
FUNCTION/PLAY button
MONO/STEREO/PAUSE/STEP
STANDBY/ON
button
STOP/MEMO. button
DISC
Tray
TUNING
(-/+)/
SKIP/SCAN
buttons
Remote
sensor
DISPLAY Window
VOLUME controller
PHONES connector
Indicates current
TUNED indicator
Repeat playback
mode indicators
surround mode
STEREO
Programmed
playback active
Indicates current
audio stream
MUTE indicator
indicator
SLEEP
Indicates current
indicator
player function:
Playback, Pause, etc.
DIGITAL
PL II
REPEAT
dts
PCM
ALL
AB
SVCD
TITLE
TUNED
PROGRAM
CHP/TRK
MUTE
STEREO
SLEEP
DVD
CD
MP3
VCD
SVCD
Speaker
S-Video CD
indicators
inserted
ANGLE active
DVD
DVD video
or
DVD
Indicates current
audio disc inserted
CD
Audio CD inserted
MP3
MP3 disc inserted
VCD
Video CD inserted
6
chapter
number
or
track
Indicates current
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
title number
mode/Volume etc. indicators
Remote Control Overview
POWER
OPEN/CLOSE
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNCTION/PLAY
on
the front
panel.
Press and hold down this button about
seconds, then press
select other function.
3
NUMBER
SLEEP
(p. 14)
AUDIO
(p. 14)
(p. 14)
(p. 17)
SOUND
SETUP
INTRODUC
to
(p. 30)
SUBTITLE
PRO LOGIC II
repeatedly
(p. 22)
RETURN
(p. 24)
DISPLAY
(p. 15)
ENTER
TITLE
ARROW
For
use
on a
GUI
in
highlighting
menu
a
MENU
screen.
(p. 22)
display
Use the MENU button to
the
menu screen
included
on
the title
display
screen, TITLE and
MENU
(p. 22)
Use the TITLE button to
selection
on
screen
included
DVD video discs.
SLOW SCAN
(Q
/
R)
(p. 21)
DVD
video discs.
VOLUME
(+/-)
PRESET(+/-) (p. 29)
SKIP/SCAN
STOP
PAUSE/STEP
MUTE
PLAY
(
) (p. 20)
/
(p. 30)
PROGRAM
(p. 27)
(p. 22)
REPEAT (p. 21, 25)
REPEAT A-B (p. 21, 25)
CLEAR
MARKER(p.
(p.
ANGLE (p.
ZOOM (p.
SEARCH
Remote Control
22)
22)
22)
22)
DIMMER
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
remote
Angle:
installation
Remove the
the buttons.
Distance: About 23 ft
battery
(p. 30)
battery
cover on
the
rear
of the remote control, and insert two
(7 m)
from the front of the
R03
(size AAA) batteries
aligned correctly.
sensor
with
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Rear Panel
POWER CORD
SPEAKER Connectors
COAXIAL DIGITAL IN Connector
AV2 AUDIO
Input (L/R)/VIDEO
AV1 AUDIO
IN Connectors
Input (L/R)/VIDEO
IN Connectors
OPTICAL IN Connector
S-VIDEO OUT Connector
FM Antenna
Connector
MONITOR VIDEO OUT Connector
COMPONENT VIDEO OUT Terminals
ConnecttoaTVwithYPbPr
inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
AM
Loop
Antenna
Connectors
Connections
TV Connections
Make
the
one
of the
capabilities
ips
Depending
following connections, depending
existing equipment.
on
Progressive
of your
Scan
(ColorStream
If your television is
a
pro)
high-definition
or
connection
"digital ready"
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
video resolution
your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connections
on
described below.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the
best connections.
TV
using
an
optional
corresponding in jacks
(C).
on
the
Y Pb Pr cable
Caution
--
Make
sure
the DVD/CD Receiver is connected
to the TV. Select the correct AV
--
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
ote
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 17.
menu
for
protection system.
S-Video connection
Rear of TV
Connect the S-VIDEO OUT
Receiver to the S-VIDEO
S-Video cable
jack on the DVD/CD
IN jack on the TV using
the
VIDEO
INPUT
S-VIDEO
(S).
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
L
Video connection
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
using
the
supplied (V).
S
Component
Video
(Color Stream )
TV
using
an
Y Pb Pr
corresponding
cable (C).
C
connection
Connect the COMPONENT VIDEO OUT
DVD/CD Receiver to the
V
jacks from the
jacks on the
in
Rear of DVD/CD Receiver
9
PREATION
Connections
(Continued)
Optional Equipment Connections
1
2
3
4
Connect
a
VCR to the AV1 connectors.
Connect
a
additional VCR to the AV2 connectors.
Connect
an
optical output
Connect
an
coaxial
of DVD
Player (or Digital
Device
etc)
output of DVD Player (or Digital Device etc)
to the OPTICAL IN connector.
to the COAXIAL DIGITAL IN connector.
VCR
Additional VCR
OUT
IN
IN
OUT
VIDEO
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
(L/R)/
VIDEO OUT
To AUDIO OUT
(L/R)/
VIDEO OUT
To AUDIO IN
VIDEO IN
(L/R)/
(AV2)
To AUDIO IN
VIDEO IN
(L/R)/
(AV1)
OPTICAL
OUT
DVD
Player (or Digital Device, etc)
ote
If the audio format of the
produce
10
a
digital output does not match the capabilities of your DVD/CD Receiver, the receiver will
strong, distorted sound or no sound at all.
Connections
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Loop aerial to the AM aerial connector.
Connect the AM
Connect he FM Wire aerial to the FM aerial connector.
AM
Loop
aerial
PREATION
(supplied)
FM Wire aerial
(supplied)
otes
To
prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be
sure
After
to fully extend the FM wire aerial.
connecting the FM Wire aerial, keep
it
as
horizontal
as
possible.
11
Connections
(Continued)
Speaker System Connection
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
Front
speaker
(Right)
Center
speaker
(Left)
speaker
Rear speaker
(Left surround)
Rear
speaker
(Right surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not remove the front cover of supplied speaker.
12
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
(Continued)
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
speakers,
centre
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
play
Front speakers
According to your listening position
speakers to 45 degree.
Centre
speaker
speakers
The centre
?
the excellent bass sound, DTS
and front
set up the
speakers
are
digital
for
speakers
ideally
the
surround
equal
same
or
Dolby Digital surround,
distance. And
height.
But
by hearing position
normally place
it above
or
you should connect
a
set up the interval between
below the television.
Rear
speakers
right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
Place left and
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener's
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Operation
Glossary for
Mini
Audio Stream &
Surround mode
Sound Mode
You
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
A) By pressing
SOUND MODE button
and
means
tional
identical to the
clarity
term DTS is
original masters) and results in excepthroughout a true 360 degree sound field. The
trademark of DTS
a
Manufactured under license
Technology, LLC.
from DTS Technology,
Each time you press SOUND button, the sound mode is
changed in the following order;
PRO LOGIC
LLC.
TECHNO
BYPASS
→
ROCK
CLASSIC
→
→
→
→
PLII MUSIC
POP
→
SOFT
→
LIVE
→
→
DANCE
→
3D SURROUND
→
...
ips
The
Dolby Digital surround format lets you enjoy up to 5.1
digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
channels of
"
PLII MOVIE
→
PLII MATRIX
ROCK:
Reproduces the acoustics of rock music.
Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
"
POP:
music.
Use this mode when
which carries the
playing
"
"
movie
or
Dolby Digital
mark. This mode
provides
2 channel
CLASSIC:
the effect
being in a movie theatre or live concert house-an effect with
intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
Reproduces
the acoustics of orchestral
music.
of
SOFT: Ideal for soft acoustic sounds.
an
B) By pressing
Each time you press
PL II button, the sound mode
changed in the following order;
is
ic than before.
PRO LOGIC
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
→
PLII MATRIX
(II)
Dolby
PL II button
tonal colorations.
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
(This
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
function available 2-channel mode
only)
When DVD is inserted.
You
can
PRO
change
the sound mode of DVD
(Dolby Digital, DTS,
LOGIC, etc) by pressing the AUDIO button
on
the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
5.1-channel sound.
MUSIC mode:
→→→
The Music mode is for
use
with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
same as
directional enhancement
audio to
mono.
For your reference
?
The DVD/CD Receiver memorizes the last mode
settings
?
for each
source individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
-
3D SURROUND
-
This unit
can produce a 3D Surround effect, using 3D Surround
technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
Sound
audio from
a
encoded with
home theatre. This feature works with DVD discs
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
BYPASS
Software with multichannel surround audio
according
14
to the way it
was
recorded.
signals
is
played
-
ote
Sound Mode is not
applicable
when
headphone
is used.
Before
General
This manual
Operation (Continued)
Te mporary Feedback Field Icons
Explanation
basic instructions for
operating the
require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
the DVD/CD receiver
is not available
or
on
Repeat
TITLE
DVD/CD receiver. Some DVDs
Repeat Chapter
CHAPT
Repeat Group (DVD
GROUP
Repeat
TRACK
General
screen.
playback
2
3
status
Some items
On-screen
1
Display
can
displayed on the TV
changed on the menu.
can
be
AB
be
OFF
Press DISPLAY
All Tracks
Repeat
A-B
Repeat
Off
Resume
display operation
(non-PBC
only)
Repeat
Action
audio discs
Track
audio discs
the disc.
ALL
On-Screen
Title
play
(non-PBC
from this
prohibited
or
only)
Video CDs and DVD
Video CDs
only)
point
not available
during playback.
Notes
Press 3/4 to select
an
The selected item will be
Press 1/2 to
change
The number buttons
numbers
(e.g.,
title
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
highlighted.
the
can
Some discs may not
item.
setting
of
an
item.
be also be used for
number).
press ENTER to execute the
For
some
setting
functions,
setting.
DVD-V
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
Angle
Sound
language
D
5.1 CH
ABC
OFF
1/1
BYPASS
titles,
and
skips
to the desired title number.
Shows the current
chapters,
and
Shows the
skips
chapter
number and total number of
to the desired
chapter
elapsed playing time, and
point directly from the elapsed
searches the
number.
time.
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
changes
the
setting.
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
SUBTITLE
angle number and total
changes the angle number.
Shows the current sound
1/2,or
Numbers, ENTER
1/2,or
setting.
Shows the current
angles,
and
Selection Method
mode,
and
number of
1/2,or
ANGLE
1/2,or
SOUND
15
PREATION
Before
Operation (Continued)
On-Screen
Display (Continued)
d
DVD-A
Items
Group
Function (Press 3/4 to select desired item)
Number
2/6
Track Number
1 /12
Time search
0:10:15
DVD Audio
Output
Shows the current group number and total number
of groups, and skips to the desired group number.
1/2,or
Numbers, ENTER
Shows the current track number and total number
1/2,or
Numbers, ENTER
of
tracks,
and
Shows the
skips
to the desired track number.
elapsed playing time.(Display only)
_
Shows the current
1
mode
PCM
Selection Method
number,
encoding method,
changes the setting.
and
and channel
1/2,or
AUDIO
5CH
Subtitle
language
Page (or Angle)
Shows the current subtitles
ABC
OFF
1 /12
changes
the
language,
and
setting.
1/2,or
SUBTITLE
Shows the current page
of pages (or angle), and
(or angle) number and total number
changes the page (or angle) number.
1/2,or
ANGLE
or
1/1
VCD2.0
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track
1/4
Time
0:20:09
Audio Channel
16
Shows the
mode,
BYPASS
changes
and
number, total number of tracks
skips to the desired track number.
elapsed playing
Shows the audio
STER.
Sound
and PBC On
channel,
(Display only)
and
the
setting.
1/2,or
Numbers, ENTER
--
1/2,or
the audio channel.
Shows the current sound
changes
time
Selection Method
AUDIO
mode,
and
1/2,or
SOUND
Before
Initial
Operation (Continued)
Picture
Setup
You
can set your own Personal Preferences
DVD/CD Receiver.
on
the
TV
Aspect
nected.
Initial
1
General and
Settings
Operation
Setup
menu
appears.
Disc Subtitle
Chinese
Disc Menu
English
Rating
French
Country
German
Code
style
picture are
is
played
off).
Italian
Language
Korean
Scan
screen
option,
a
sides of the
16:9 wide TV is connected.
Letterbox
Panscan
Disc Menu
16:9 Wide
Rating
TV
Code
Aspect
Language
option.
current setting
Scan
menu
will show the
menu
style (Both
4:3
Progressive
selected
con-
bars
conventional TV set is
4:3
Menu
The
masking
Disc Subtitle
Others
2
with
Disc Audio
Country
Other--------
Speaker Setup
Use 3/4 to select the
a
back in that
16:9 Wide: Select when
Polish
5.1
standard 4:3 TV is
images
picture.
cut
Spanish
Aspect
Progressive
a
theatrical
above and below the
Scan
Original
Menu
Displays
connected. The video material formatted in the Pan &
Disc Audio
TV
DVD-A
4:3 Panscan: Select when
Press SETUP.
The
DVD
4:3 Letterbox: Select when
as
well
as
5.1
for the
Speaker Setup
Others
alternate
setting(s).
While the
is
selected, press 2, then
option
3
setting.
4
option require
SETUP, RETURN,
5 Setup
menu
3/4 to select the desired
PLAY to
or
move
the
menu.
Language
Disc
Language
Select
language
a
DVD
Rating
TV
Menu
Original
5.1
Chinese
Others
Disc Menu
English
German
Language
Scan
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
Italian
Korean
an
Speaker Setup
Other--------
to On in error, you must reset the unit.
Others
1)
Language
a
language
Speaker Setup
Caution
Spanish
Aspect
Polish
5.1
Scan
French
Code
Progressive
see
Language
Disc Subtitle
Menu
Code
Aspect
Disc Audio
Country
Select
On
Progressive
Rating
you
Off
Disc Subtitle
Country
code, press CLEAR.
Menu
Disc Audio
Disc Menu
The
TV
DVD-A
DVD-A
for the disc's Menu, Audio, and
original language set for the disc is selected.
Other : To select another language, use the number buttons to
enter the corresponding 4-digit number according to the language code list on page 31. If you enter the wrong language
:
DVD
Progressive
provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the DVD/CD player to a standard
(analog) television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Subtitle.
Original
Scan
Scan Video
Press ENTER to confirm your selection.
Some menu
additional steps.
Press
Progressive
Remove any disc from the unit and close the disc
on the display
tray. See that "NO DISC" is displayed
for the
Setup
menu.
when you press SETUP.
Disc Audio
Chinese
Disc Subtitle
Chinese
Disc Menu
English
This is the
window.
menu
2)
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
visible
on a
and
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
a
Rating
Country
TV
Code
Aspect
Menu
Language
17
PREATION
Before
Operation (Continued)
Speaker Setup
5.1
Auto
Speaker settings
DVD-V
You
DVD-A
Play
can
DVD-V
DVD-A
set up the DVD/CD Receiver so a DVD disc
starts playing whenever the DVD is insert-
automatically
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 28.)
ed.
If Auto
Play
will search
play
mode is set to On, this DVD/CD Receiver
title that playback time is longest and then
a
back the title
On: Auto
Off: Auto
Play
Play
automatically.
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
ote
Code
Volume
Small
Distance
Language
Scan
Progressive
The Auto
0dB
Size
Aspect
Menu
R
Front L
Rating
0.3m
Test
Return
5.1
Speaker Setup
Others
Others
The DRC, Vocal, PBC and Auto
Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
Language
Progressive
5.1
On
Play
Scan
Speaker Setup
Others
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
CDs.
18
to On
or
Off.
played according to the PBC.
played the same way as Audio
Play
function may not work for
some
DVDs.
Before
Operation (Continued)
Parental Control
Rating
DVD-V
Enter the code of
DVD-V
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
scenes on
the disc. These
scenes are
are
Rating
Country
TV
Menu
5.1
Language
Scan
Speaker Setup
Others
7
Disc Menu
6
5
Rating
TV
Code
Aspect
Progressive
8
Disc Subtitle
Country
1
4
Code
3
Aspect
2
5.1
Change
1
Unlock
Speaker Setup
Select
the
using
Country
2
step
3
4
5
6 selection,
Code is
1
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
on
the
Setup
menu
using
the
3/4 buttons.
3 of
Shift the
"Rating"
to create
a
is
selected, press
2.
"Rating"
personal 4-digit security password. then
4-digit password again and
tons to confirm the
Changing
pass-
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Ratings
1 to 8: Some discs contain
suitable for children. If you set
er, all disc
be
scenes
with the
an
alternative
scene
one.
back will
5
If
change
same
on
rating
the disc.
or a
suitable alternative is found, playYou must enter the 4-digit password
no
stop.
the
rating
4-digit password
changed (see "Changing
the
4-digit
is necessary when
the 4-digit code"
code
1
Follow
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
3
Steps
1-2
as
shown above to the left
(Rating).
ENTER.
5
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
6
Press SETUP to exit the
4
Enter the
ENTER.
Enter
time and veri-
menu.
not
rating for the playrating or lower will
will not be played
is available
The alternative must have the
lower
button and select the
3/4 buttons.
If you
forget
4-digit
your
code
same
played. Higher rated scenes
unless
or
a
scenes
the 3/4 buttons.
2
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
using
ote
below.).
personal 4-digit security
left.
Confirmation of the
the code is
word, then press ENTER.
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
When you have already registered a password;
Enter a 4-digit password using the numbered but-
Select
using 2
using
cursor
second character
press ENTER. Enter the
press ENTER to verify.
on
selected, press 2.
Select the first character
Select
the 3/4 buttons
menu.
Follow
Others
Code
Country
setup
While
Language
Progressive Scan
Menu
"Rating"
PREATION
SG
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
Code Set
Disc Subtitle
The Parental Control feature allows
country-dependent.
whose standards
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 32.).
level in order to
play
Press ENTER to confirm your rating
then press SETUP to exit the menu.
If you
your
password,
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
the disc.
selection,
forget
word, follow the procedure below.
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
ote
This function may not work for
some
DVDs.
19
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD-V
General Features
VCD2.0
DVD-A
the TV and select the video
input
VCD1.1
ote
source con-
nected to the DVD/CD Receiver.
Audio
the
1
system: Turn
input
source
the audio
on
2
Load your chosen disc in the
playback side facing down.
3
Press OPEN/CLOSE to close the
READING appears
starts
available
system and select
connected to the DVD/CD Receiver.
Press OPEN/CLOSE to open the disc
automatically.
on
If
tray.
DVD-V
When
tray, with the
move
might
The
is
or
Moving
DVD-V
When
displayed
may be displayed first after
Video CD which offers a menu.
loading
a
Use the 1 234 buttons to select the
view, then press ENTER
Press TITLE
or
title/chapter you
playback.
to start
MENU to return to the
menu screen.
3
4
buttons to select
an
option
you
want, then press ENTER to view the option.
title/group,
one
you
can
follows:
to another CHAPTER/TRACK
VCD1.1
DVD-A
a
1/3
title
disc has
disc has
than
as
1 /12
1/6
on a
more
chapter/track
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
or > briefly during
playback to select the next chapter/track or to return to the
beginning of the current chapter/track.
Press . twice briefly to step back to the previous chapter/group/track.
To go directly to any chapter during DVD playback, press
chapter/group/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
VCD2.0
ote
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
setting
the
menu screen.
and the exact
operating procedures for
depending on the disc.
may differ
Follow the instructions on the each
using
than
as
DISPLAY. Then, press 3/4 to select the
DVD-A
Use the 1 2
Menu
more
Press SKIP/SCAN .
DVD-V
want to
disc has
to another title
1/6
appear
menu screen
DVD
1/3
DVD-A
a
menu.
to another TITLE /GROUP
1 /12
a menu screen
Setup
Press DISPLAY, then press the appropriate number
(0-9) to select a title/group number.
instead.
If
the
use
button
tray.
the TV screen, and playback
does not start,
menu
on
Moving
playback
press PLAY.
In some cases, the disc
Unless stated otherwise, all operations described
the remote control. Some features may also be
menu
menu screen.
You also may set PBC to Off under
18.
See page
setup.
For
two-digit numbers, press
(0-9)in rapid succession.
Search
DVD-V
VCD2.0
the numbered buttons
VCD1.1
1 Press and hold SKIP/SCAN .
or
> for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
to select the
otes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
"Parental Control",
DVDs may have a
on
page
regional code.
play discs that
Your receiver will not
(see
19).
3 To return to normal
have
code different from your receiver. The
for this receiver is 3 (three).
regional
regional code
play,
press PLAY.
a
ote
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Pause
DVD-V
VCD2.0
1 Press PAUSE/STEP
2 To return to
20
VCD1.1
during playback.
playback,
press PLAY.
Operation
with DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD-V
VCD1.1
go into PAUSE mode.
now
picture frame-by-frame by
repeatedly on the remote
PAUSE/STEP
con-
trol.
3 To return to normal
The
a
during playback.
advance the
pressing
repeat
play,
Repeat
The
The
1 To
When
DVD audio disc that includes
this
may be
permitted
in
some
-
m
Repeat
The
+
during playback.
The DVD/CD Receiver will enter SLOW mode.
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
Repeat
is not
reverse
the TV
a
third time.
screen.
Track/All/Off
All icon appears
on
the TV
Repeat
Repeat
the TV
on
screen.
a
screen.
mode, press REPEAT
Off icon appears
a
on
the TV
a
third time.
screen.
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
applicable
0:20:09
DVD-V
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
in
on
Track icon appears
Time Search
ote
playback
press REPEAT
Off icon appears
screen.
ote
On
setup
2UsetheSLOWSCAN-morM+toselectthe
Slow motion
the TV
on
VCD1.1
M
or
press REPEAT
currently playing,
icon appears
Repeat
screen.
repeat the disc currently playing, press REPEAT
The
VCD2.0
press REPEAT.
the TV
repeat the track currently playing, press REPEAT.
3 To exit
DVD-V
-
on
second time.
pictures,
picture
segments.
3
Track icon appears
Repeat mode,
Repeat
The
1 Press SLOW SCAN
Repeat Track/Group/Off
currently playing track,
Repeat Group
3 To exit
2 To
Slow Motion
-
repeat the group
second time.
Video CDs
press PLAY.
ote
using a
operation
the
2 To
The DVD/CD Receiver will
can
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
DVD Audio Discs
(continued)
for
play
appears
on
the
on-screen
at
dis-
screen.
The Time Search box shows the
Video CD.
The
during playback.
playing
elapsed playing
time of the
current disc.
2 Within 10
A-B
Repeat
AB
repeat
OFF
sequence in
a
3 Within 10
a
title
or
A
*
"
appears
briefly
on
2 Press REPEAT A-B
the TV
the
group:
1 Press REPEAT A-B at your chosen
"
starting point.
on-screen
to select the Time
display.
sequence
point.
briefly on the TV screen, and the repeat
begins ("AsB" appears the display window).
CHAPT
DVD-V
VCD2.0
1/6
TITLE
DVD Video Discs
the number buttons to enter
right
hours, minutes, and
sec-
in the box.
4 Within 10
seconds, press ENTER
to confirm the start
time.
Playback
3 To cancel the sequence, press REPEAT A-B.
Repeat
required
use
start time. Enter
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
screen.
at your chosen end
again
seconds,
onds from left to
"A B" appears
1 To
seconds, press 3/4
Search icon in the
VCD1.1
The "-:--:--" appears in the Time Search box.
A*
To
VCD2.0
DVD-V
an
invalid
starts from the selected time
on
the disc. If you enter
time, playback will continue from the
current
point.
VCD1.1
TRACK
ALL
OFF
Repeat Chapter/Title/Off
-
repeat the currently playing chapter, press
REPEAT.
The
2 To
Repeat Chapter
repeat
the title
icon appears
on
the TV
currently playing,
screen.
press REPEAT
a
second time.
The
Repeat
3 To exit
The
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
21
OPERATION
with DVD and Video CD
Operation
General Features
3D Surround
This unit
produce
can
VCD2.0
DVD-V
a
3
(continued)
3D SUR
BYPASS
VCD1.1
4
3D Surround effect, which
playback from two
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
a
home theater
again
5
VCD2.0
DVD-V
during playback.
effect, press SOUND
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
or
still
playback
then press ENTER.
to acti-
the
repeatedly,
level
magnification
Title Menu
If the current title has
move
through
2 The
normal
playback
or
3 To
paused image.
menu can
and subtitle
return to
function may not work for
some
DVDs.
Marker Search
can
1
start
playback
can
VCD1.1
2 To
from
memorized
a
point. Up
to
be memorized.
mark, follow these steps.
a
the TV
briefly.
screen
1 to enter up to nine Marker
Repeat step
a
points
on a
Marked Scene
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
a
the
remove
the MARKER SEARCH menu, press
During
Marked Scene
disc
playback,
The MARKER SEARCH
camera
angle
appears
on
the
1 ENG
DVD-A
D
1PPCM
5.1 CH
5CH
repeatedly during playback
language or audio track.
to hear
a
dif-
VCD2.0
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
VCD1.1
a
dif-
Subtitles
DVD-V
Press S-TITLE
repeatedly during playback
languages.
DVD-A
ABC
1 ENG
to
see
the
press SEARCH.
menu
will appear
on
the
a
display.
different subtitle
screen.
Press 1/2 to select the Marker number that you want
erase.
recorded at different
scenes
Changing the Audio Language
scene.
SEARCH.
a
1/1
DVD-V
ferent audio channel
will start from the Marked
Playback
22
again.
screen.
Marker
3 Press ENTER.
to
again.
displayed.
Press AUDIO
seconds, press 1/2 to select
number that you want to recall.
2
angles, spoken language
chapters for the title.
and
the disc menu, press MENU
Angle
ferent audio
2 Within 10
1
is
menu
remove
DVD-V
To Recall
To clear
the
camera
The number of the current
on
disc.
4 To
on
DVD-V
If the disc contains
memorize.
1
will appear
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
2
menu
may appear.
1 Press MENU.
Camera
points
To enter
menu
MARKER SEARCH
1/9
nine
menu, the
the title menu, press TITLE
remove
The disc
VCD2.0
DVD-V
list
options,
Disc Menu
zoom
a
Otherwise, the disc
screen.
the zoomed
ote
You
DVD-V
1 Press TITLE.
picture.
The
the contents of DVD Video
Checking
steps.
resume
DVD-V
discs: Menus
VCD1.1
2 Use the 1 234 buttons to
the
DVD Features
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
during playback
3 Press CLEAR to
the MARKER SEARCH menu, press
remove
Special
vate the Zoom function.
If you press ZOOM
increases up to six
To
or
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
additional Marker
SEARCH.
to select "BYPASS".
Zoom
erase
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
2 and 3 to
Repeat steps
numbers.
simulates multi-channel audio
channel audio from
Press CLEAR.
The Marker number will be erased from the list.
ote
If
appears, the feature is not available
on
the disc.
Operation
with DVD and Video CD
DVD Audio Discs
DVD-A
Viewing
another PAGE
Since DVD Audio discs
DVD Audio is
building on the success
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
a new
disc format
DVD Audio
can provide higher quality stereo than Audio
sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
CDs with
A
a
typical DVD Audio disc contains up to seven
capacity of a CD. This additional space is
data
times the
used for
can
hold
DVD-A
a
1 /12
lot of content, there
on the disc.
various ways to see what's available
1 Press DISPLAY during playback.
are
2 Press 3/4 to select
3 Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to disc
because the information available depends upon the way the
disc
was
created.
ote
Since the
authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc
you're playing.
music, either Advanced Resolution multi-channel sound
quality that is closer to the artist's master recording or
for longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlist, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
Moving
to another GROUP
1/6
DVD-A
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access different groups during playback via the on-screen display.
1 Press DISPLAY during playback on in stop mode.
2 Press 3/4 to select
3 Press 1/2
or
Group
icon.
the numbered buttons
(0-9)
to select
a
group number.
ote
Sometimes the author of the disc creates hidden
tent that
can
only
be accessed
If the lock icon appears
on
by entering
a
con-
password.
the TV screen, enter the
password (sometimes you'll find it on the disc's jacket
cover or on a web site). This password control isn't dictated by your DVD/CD Receiver
it is a function of the
---
disc.
Since the
the
authoring of DVD Audio Discs varies, some of
display choices might not be available for
you're playing.
on-screen
the disc
23
OPERATION
with Audio and MP3/WMA Disc
Operation
Playing an Audio CD and MP3/WMA Disc
CD
MP3
can
play
MP3/WMA
MPEG1 audio
files that have
on
disc and close the tray.
CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
The
player
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read
extension other than
About
MP3 file that has
a
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
file
a
The MP3/WMA
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
menu
MP3 WMA
1.
Media
3.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
compatibility
as
a
-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
track, it
folder, and ENTER.
3 A list of files in the folder appears.
to
a
track then press PLAY
or
6.
File
Playback starts.
During playback,
elapsed playing
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
menu.
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
MP3/WMA file in the 1st
playback
or use a new one.
names
and must
ENTER.
no
MP3/WMA files. If you wish
MP3/WMA files, format all the data in
cannot
playback
the disc
Press 3/4 to select
with this DVD/CD
follows:
-
first track. If there is
Press 3/4 to select
offers double the audio
the MP3 format.
-
4.
Program
Audio)
compression
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy32
2.
Audio)
Microsoft audio
receiver is limited
Press 3/4 to select the MP3/WMA then press
ENTER.
Media
WMA(Window
An WMA file is
MP3 WMA
4
an
".mp3".
a
Audio
2
Recordings
An MP3 file is audio data
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
MP3/WMA Recordings on right.
Insert
on
About MP3
WMA
The DVD/CD Receiver
1
Notes
move
to the
previous
page.
This DVD/CD Receiver
to
requires discs/recordings
meet certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK 1
TRACK02
TRACK 2
TRACK03
TRACK 3
TRACK04
TRACK 4
TRACK05
TRACK 5
TRACK06
TRACK 6
TRACK07
TRACK 7
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
BYPASS
menu
Clear All
TRACK 8
00:00
1
MP3/WMA
OFF
menu
list,
are
use
in
To
24
a
file list and want to return to the Folder
the 3/4 to
return to the
5
Customers should also note that
required
ip
If you
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files). That require
certain pre-existing conditions (see above) to insure
compatible playback.
and
highlight
previous menu screen.
stop playback
at any other
press ENTER to
time, press STOP.
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
Operation
CD
Pause
with Audio and MP3/WMA Disc
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
case
MP3
WMA
briefly during
or
step back
to
sequence.
Repeat
icon and "A
Repeat
to
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
during playback.
"
appears
again
on
the
menu screen.
at your chosen end point.
on the menu screen,
begins
to
play repeatedly.
3 To exit the sequence and return to normal
REPEAT A-B again.
The
track.
the track number
press REPEAT A-B at your cho*
icon and "A B" appears
and the sequence
to return to the
briefly
a
CD
2 Press REPEAT A-B
The
playback to go to the next track
beginning of the current track.
the
CD
another Track
A-B
During disc playback,
sen starting point.
The
Moving to
(Continued)
Repeat
icon and "OFF" appears
3D Surround
This unit
the
press
menu screen.
CD
produce
can
on
play,
a
3D Surround effect, which
playback from two
simulates multi-channel audio
Repeat Track/All/Off
1 To
CD
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
menu
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
a
home theater
2 To
repeat all tracks
on a
disc, press REPEAT
a sec-
ond time.
The
Repeat
3 To cancel
The
Repeat mode,
Repeat
Search
icon and "ALL" appears
MP3
two seconds
during playback.
The
now
will
on
2 To turn off the 3D Surround
again
during playback.
effect, press SOUND
to select "BYPASS.".
menu screen.
the
a
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
WMA
1 Press and hold SKIP/SCAN .
player
the
press REPEAT
icon and "OFF" appears
CD
on
system.
1 Press SOUND to select "3D SUR"
screen.
or
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
mode, press PLAY.
25
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
Press SKIP/SCAN .
This DVD/CD Rceiver
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
1
a
can
disc and close the
The MP3/WMA-JPEG choice
TV
to another File
Moving
JPEG
menu
appears
on
the
during
The DVD/CD Receiver will
2 To return to the slide
screen.
once
or
during viewing a
previous file.
to the
Still Picture
1 Press PAUSE/STEP
tray.
>
or
to advance to the next file
picture
PAUSE/STEP
slide show.
go into PAUSE mode.
now
show, press PLAY
or
press
again.
MP3 WMA
To
JPEG
2
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
menu
on
appears
the TV
flip the picture
to
flip
the
screen.
To rotate
picture
JPEG
Press 1/2
Folder1
Folder2
during showing
clockwise
picture
Folder3
or
a
picture
to rotate the
counter clockwise.
Folder4
Folder5
Folder6
Folder7
Notes
Folder8
Slide
Speed
JPEG
on
upon the size and number of the JPEG
a long time for the DVD/CD
Depending
Press 3/4 to select
a
files, it could take
folder, and ENTER.
3 A list of files in the folder appears.
Press RETURN to
choice
move
to the MP3/WMA-JPEG
list,
"
are
in
file list and want to return to the Folder
a
the 34 buttons
on
the remote to
highlight
If
want to view
a
a
particular file,
file and press ENTER
or
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
Press MENU to
move
move
press 3/4 to
PLAY.
to
move
to
to the
previous
page.
Folder1
Picture3
Picture4
Picture5
Picture6
Picture7
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
ip
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
then press 3/4 to
use, and press ENTER.
5
To
stop viewing
The JPEG
26
reduce the resolution of the
menu
at any other
appears.
pixels
on
and burn anoth-
the disc should
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
time, press STOP.
into the CD
If the files have
File
them
names
without
by
files
shown
are
".jpe"
".jpg"
or
as
be read
explorer.
Picture2
Speed
---
Total number of files and folders
rename
to the next page.
Picture1
There
big
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
you
4 highlight
5/32
too
be less than 650.
and press ENTER to return to the
previous
JPEG
are
JPEG files to less than 2 mega
er disc.
use
"
Receiver to read the disc's contents. If you don't see
display after several minutes, some of
an on-screen
the files
menu.
Tip
If you
Recordings
Off
layout.
".jpeg" extensions, please
files.
".jpg"
extension will not be able to
this DVD/CD Receiver. Even
as
JPEG
image
though
files in windows
the
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
contain 30 tracks.
can
1
mode to enter the
in the
during playback
Program Edit mode.
or
E
The
mark will appear to the right of the word
the right side of the menu screen.
on
with Video CD
ote
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
Program
Press PROGRAM
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
OPERATION
contain 30 tracks.
can
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
menu
tray.
is
playback
stopped.
will appear.
ote
Press PROGRAM to exit the
E
the
mark will
Program
Edit mode;
Program
VCD
E
TRACK 1
disappear.
TRACK 2
TRACK 3
TRACK 4
Select
2
track, then press ENTER
a
selected track
step
3 Repeat
Program
the
on
2 to
Program
place
to
place
TRACK 5
the
TRACK 6
TRACK 7
list.
Clear All
TRACK 8
additional tracks
on
the
list.
ote
Press RETURN
E
Program
CD
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 3
TRACK 10
TRACK 4
TRACK 3
TRACK 2
TRACK 2
3
TRACK 4
TRACK 3
TRACK 3
TRACK 4
TRACK 5
TRACK 6
menu.
Follow
steps
2-6 of
"Programmed Playback
Audio CD and MP3/WMA disc"
on
To
from
with
left.
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
menu
Clear All
TRACK 8
BYPASS
00:00
3
MP3/WMA
disappears
Repeat Programmed
programmed
track you selected last is
highlighted
on
5 playing.
Press TITLE to
To
To
repeat all tracks
Press PLAY to start.
The
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
on
the
menu
Repeat mode,
a
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
the program list, press
icon and "ALL" appears
Repeat
To cancel
on
second time.
a
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
once.
To
resume normal playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
"PROG." indicator
window.
Tracks
icon and "TRACK" appears
Repeat
REPEAT
The
6 Playback begins
display
screen.
to the next page.
Press MENU to move to the previous page.
move
in the
repeat the track currently playing, press REPEAT.
The
Press 3/4 to select the track you want to start
played
resume
"PROG." indicator
menu
Press 2.
have
normal
playback
4 programmed playback,
press PROGRAM.
OFF
the program list.
7
Program
TRACK 6
TRACK 7
The
PROGRAM to exit the
or
E
TRACK 8
TRACK 1
TRACK 5
4
Program
MP3 WMA
disappears
on
the
menu screen.
MP3/WMA disc
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
1 Follow
List"
as
the
Complete Program
steps
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
27
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
Disc Audio
R
Disc Menu
Code
Volume
Menu
Scan
player. If you load a disc that
tings memorized, the latest stop position is
ly recalled.
Small
Distance
Language
Progressive
switch off the
0dB
Size
Aspect
user
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
R
Front L
Rating
TV
Memory
VCD1.1
This DVD/CD Receiver memorizes the
Disc Subtitle
Country
CD
0.3m
Test
has its setautomatical-
Return
5.1
otes
Speaker Setup
Others
--
--
are stored in memory for use any time.
This DVD/CD Receiver does not memorize settings of
Settings
a
1
Select "5.1
Speaker Setup" using
buttons
the
2
While "5.1
on
setup
the 3/4
disc if you switch off the DVD/CD Receiver before
to play it.
commencing
menu.
Speaker Setup"
is
selected, press 2
button.
System
Select
You must select the
Press 2 buttons to select the desired
3
4 Adjust options by using
TV
speaker.
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE/STEP on the front panel or
remote control for more than 5 seconds to be able to
select a system (PAL, NTSC, or AUTO).
341 2 buttons.
When the selected
Speaker
Select
system does not coincide with the
system of your TV, normal colour picture may not be
selection
speaker that you want to adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
a
displayed.
AUTO:
NTSC:
speaker settings are prohibited by
Digital licensing agreement.
the
PAL:
Dolby
Press 1 / 2 to
speaker. (-6dB
adjust the output
+6dB)
level of the selected
~
Size
Since the
speaker settings
settings.
fixed, you
are
cannot
change
Distance
If you connected speakers to your DVD/CD Receiver
setting the Distance lets the speakers know how far the
,
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
ote
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
speaker.
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
(L)
Right (R)
system.
→
Centre
→
→
Front
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
28
previous
Select when DVD/CD Receiver is connected
with PAL-TV.
Volume
You
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
ote
Certain
the
Select when DVD/CD Receiver is connected
with Multi
menu.
Operation
Presetting
You
can
tuning,
preset
make
with Radio
the radio stations
50 stations for FM and AM
sure
(MW).
Before
Preset radio stations in the DVD/CD Receiver's memory
(see "Presetting radio stations" on the left).
that you have turned down the vol-
first
the remote control until FM
1
ume.
Press BAND
1
AM
on
appears in the
(MW)
2
And then every time you press
AM (MW) changes alternately.
3
Press and hold TUNING
or
window.
display
BAND, FM and
2
panel for about two seconds
frequency indication starts to change,
until the
appear in the
display
stereo
Press PRESET +/-
or
repeatedly
control to select the
FM appears in the
on
the remote
station you want.
preset
the volume
front
when the DVD/CD Receiver tunes in
(for
display
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
3 Adjustpanel
then
release.
Scanning stops
(MW)
window.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
on
the front
Press BAND until AM
The last received station is tuned in.
or
station. "TUNED" and "STEREO"
to the radio
Listening
remote
a
program)
or
-
To turn off the radio
window.
Press POWER to turn the DVD/CD receiver off
another function mode
or
select
(CD/DVD, VIDEO1, etc.,).
ote
"TUNED"
appears when the
only
signal
To listen to
is FM and
STEREO.
4
Press STOP/MEMO.
A
Press TUNING
6
or
to select the
For manual
panel.
on
Press STOP/MEMO.
the front
on
automatic
tuning,
in
step
2.
or
press and hold TUNING
for about two seconds
or
want.
tuning
tuning, press TUNING
panel repeatedly.
For automatic
the front
preset number you
the front
on
or
on
the front
panel.
panel again.
The station is stored.
To select
Repeat steps
7
the front
on
preset number will flash in the display window.
5 panel
non-preset radio stations
Use manual
3 to 6 to store other stations.
You
to select
To tune in
station with
a
Press TUNING
a
to tune in the station
weak
in
step
3
manually.
appeared
in the
again,
then 9
display
window
the stations
are
"STEREO"
will be
If you have accidentally entered into the "CLEAR ALL"
mode and you do not wish to clear the memory, do
not press any key. After a few seconds, the "CLEAR
display
will go off
by
itself and
3
change
the remote control
seconds).
no
on
noisy
the front
disappears
stereo
Press the button
To
ALL"
(within
Press MONO/ST.
Press and hold STOP/MEMO. for about two seconds
and then press STOP/MEMO.
cleared.
on
a
For your reference
If an FM program is
To clear all the stored stations
and "CLEAR ALL" is
the number buttons
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
signal
repeatedly
or
preset radio station directly
a
can use
effect, but
again
panel so that
display window. There
the reception will improve.
in the
to restore the stereo effect.
improve reception
supplied antennas.
Reorient the
to normal
mode.
ote
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
the
preset number, follow the steps
a
5-6
as
above.
29
OPERATION
Other Function
Sleep
Timer
You
set the DVD/CD Receiver to turn off automati-
can
cally
1
at
a
specified
Selecting input
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
2
Setting
sleep
sleep
time.
time appears in the dis-
You
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
source
other units connected to the AV1,
AV2 connectors, Coaxial connector or Optical connector. Refer to the owner's manual supplied with the unit
or
for further information
Press AUX
window.
VCRs
can use
on
repeatedly
input
the
on
select the desired
operation.
the remote control to
source.
Each time you press this button, the mode of the function changes in the following sequence:
VIDEO 1: for
(L/R)
selecting
the
analog signal
from AV1 AUDIO IN
& VIDEO IN Connectors.
VIDEO 1 OPT: for
selecting
the
optical digital signal
from
AV1 VIDEO IN & OPTICAL IN Connector.
VIDEO 1 COAX: for
selecting
the coaxial
digital signal
from
AV1 VIDEO IN & COAXIAL IN Connector.
Dimmer
VIDEO 2: for
selecting
the
analog signal
from AV2 AUDIO IN
This function will change the brightness of the display
window on the front panel during in power-on status.
VIDEO 2 OPT: for
Press the DIMMER
AV2 VIDEO IN & OPTICAL IN Connector.
repeatedly.
(L/R)
& VIDEO IN Connectors.
selecting
VIDEO 2 COAX: for
Mute
the
selecting
optical digital signal
the coaxial
from
digital signal
from
AV2 VIDEO IN & COAXIAL IN Connector.
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
Using Headphone
The
plug ( 3.5mm)
into the
speakers are automatically disconnected
plug in a headphone (not supplied).
30
Optical input function is available only when
Sampling Frequency is 32 96kHz.
You can also select the input source by pressing
FUNCTION/PLAY button on the front panel.
other unit's
Jack
Connect a stereo headphone
PHONES connector.
otes
The
when you
the
~
Press and hold down this button about 3 seconds,
repeatedly to select input source.
then press
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
OPERATION
31
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
32
Republic
Islands
(French)
State
(British)
(USA)
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
securely
Insert
that the DVD or,
a
disc.
(Check
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
?
The video cable is not connected
?
securely.
sound
or
appropriate video input mode
the picture from the DVD/
The connected TV power is turned off.
?T
The
?
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is poor.
The DVD/CD Receiver
does not start
jacks
the TV.
Select the correct
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
screen.
you can hear the
sound from the DVD/CD Receiver.
securely.
The
u rn on
audio receiver
signal output.
?
the TV
Connect the video cable into the
?
a
on
securely.
?
very low-level
sound is heard.
only
is
so
CD Receiver appears
no
display
lit.)
picture.
There is
into the
audio CD indicator in the DVD
does not work.
No
service.
connecting cable
is
damaged.
dirty.
urn on
the
equipment
connected with
the audio cable.
?
playback.
Insert
a
it with
disc.
new one.
(Check
that the DVD,
audio CD indicator in the DVD
or
display
is
lit.)
?
An
unplayable
disc is inserted.
?
Insert
a
playable
disc.
the disc
(Check
type, colour system and Regional code.)
?
The disc is
placed upside
down.
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?Amenu
is
dirty.
on
the TV
?
?
screen.
on
the disc
tray correctly
guide.
Clean the disc.
Press the SET UP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
dirty.
?
rating
Wipe
function
Rating
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
dirty.
speakers and components
poorly.
?
are
?
connected
?
The DVD/CD Receiver is located too
close to the TV.
Clean the disc.
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
33
REF NC
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
?
Connect the antenna
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
preset
or
?T
?
une
in the station
Preset the stations
manually.
(page 29).
stations have been cleared
(when
tuning by scanning preset stations).
?
The remote control
does not work
The remote control is not
remote
properly.
sensor
pointed
at the
?
of the DVD/CD Receiver.
?
The remote control is too far from the
?
There is
?
DVD/CD Receiver.
an
Point the remote control at the remote
sensor
ft
obstacle in the
(7 m).
?
Remove the obstacle.
are
?
Replace
while
play-
?
Insert such
the front
panel
?
Press DIMMER
path
of the
of the DVD/CD Receiver.
Use the remote control within about 23
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The sound mode
Logic II mode
be changed.
The front
Pro
panel display
is too dim.
34
or
?
The
ing
cannot
?
system
a
MP3
Nothing
display.
is
cannot
or
change
the batteries with
a
new ones.
CD disc.
WMA disc.
displayed
on
on
the remote control.
Specification
Power
Power
Refer to main label
Mass
Genral
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
[MW]
55
x
350
mm
5°C to 35°C,
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL 625/50, NTSC 525/60
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack x 2
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
1.0 V
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
108.0 MHz
-
or
65.0
74.0
-
MHz, 87.5
-
1
108.0 MHz
10.7 MHz
60 dB
150
-
522
-
(Mono)
8,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Stereo mode
45W+45W(8Ωat1kHz,THD10%)
Front: 45W + 45W (THD 10 %)
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 45W
Inputs
Outputs
VIDEO 1, VIDEO 2, COAXIAL AUDIO, OPTICAL AUDIO
Surround*: 45W
PHONES:
45W
+
Subwoofer*: 60W
Type
Impedance
Frequency Response
1
(32 Ω,
(6Ω
1.0
(8Ω
at 30
Way
150
Input Power
Input Power
Net
(W
x
Speaker
-
20,000 Hz
(1m)
90W
x
D)
93x132.5x113mm
Weight
%)
Centre
speaker
Passive Subwoofer
(LHS-T6440C)
1
Way
1
Speaker
(LHS-T6440W)
1
Way
8Ω
45W
H
Hz, THD 10
V)
Speaker
84 dB/W
Rated
Max.
1
kHz, THD 10 %)
at 1
8Ω
Sound Pressure Level
Net Dimensions
Designs
REF NC
nm
0.5 %
(LHS-T6440T)
Suplied Acesori
650
wavelength
More than 70 dB
Satellite
Speakrs
status: Horizontal
150 Hz to 18 kHz
More than 70 dB
output
Video
Operation
5% to 85%
Surround mode
Amplifer
x
Laser
Component
AM
kg
430
Temperature:
S-video
FM
4.6
Operating
Operating humidity
Video
Video
Tuner
Refer to main label
supply
consumption
0.6kg
160
-
20,000 Hz
83 dB/W
1
Speaker
6Ω
(1m)
45W
90W
40
-
1,500 Hz
70 dB/W
(1m)
60W
120 W
210x132.5x113mm
160x350x330mm
0.65kg
4.5kg
?Speakers...........................6?Speakercables......................5
?AMloopantenna.....................1?FMantenna.........................1
?Remotecontrol......................1?Batteries(AAA).......................2
and
specifications
are
subject
to
change
without notice.
35
P/N: 3834RH0026M
Download PDF

advertising