LH-T753TB NA3SLLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T753 (Main Unit: LH-T753TB Speakers: LHS-75TBS, LHS-75TBC, LHS-75TBW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0076S Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the About the WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK for instructions Indicates hazards itself product. symbols or other likely to cause material damage. Indicates special operating Indicates tips harm to the unit features of this unit. HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in such as a book case or similar unit. a confined space CAUTION: This DVD/CD receiver To ensure proper use employs of this a laser system. carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location (see service procedure). Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such vases, should be placed making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. product, please read this owner's manual as and hints for on the apparatus. OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 ___________________________________ ___________________________________ Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack...............21 RepeatTrack/All/Off...................21 NotesonDiscs..........................5 Search.............................21 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................22 ViewingaJPEGdisc.....................22 RemoteControlOverview....................7 SlideShow.........................22 StillPicture.........................22 Preparation Connections............................8-11 TVConnections.........................8 OptionalEquipmentConnections . . . . . . . . . . . .9 Movingtoanotherfile.................22 Torotatepicture......................22 ProgrammedPlayback.....................23 RepeatProgrammedTracks................23 .23 ErasingaTrackfromProgrammeList 23 Erasing the Complete Programme List DivXDiscOperation.......................24 SpeakerSetup............................25 . AerialConnections........................9 10 Assembling and Connecting to the Speakers .10 ToHangtheCentreSpeakeronawall. SpeakerSystemConnection...............10 SpeakerPositioning......................11 BeforeOperation.......................12-17 Mini Glossary for Audio Stream & Surround . . . . . . . . . Mode.................................12 SoundMode...........................12 On-ScreenDisplay.....................13 InitialSettings........................14-17 GeneralOperation....................14 Language..........................14 Display..........................14-15 Audio..............................15 Lock(ParentalControl)................16 Others.............................17 Operation DVDorVideoCDOperation...............17-20 PlayingaDVDandVideoCD...............17 GeneralFeatures.....................18-20 MovingtoanotherTITLE/GROUP. Moving to another CHAPTER/TRACK . . . . . . . . . . .18 . 18 SlowMotion.........................18 Still Picture and Frame-by-Frame Playback . 18 Search.............................18 Repeat............................18 RepeatA-B.........................19 TimeSearch........................19 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................20 TitleMenu..........................20 ` DiscMenu...........................20 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .20 .20 Subtitles...........................20 DVDAudioDiscs........................20 . . . . . . . . . . . . . AdditionalInformation.....................26 LastConditionMemory...................26 ScreenSaver...........................26 SystemSelect..........................26 ControllingtheTV.......................26 OperationwithRadio......................27 Presettingtheradiostations................27 Listeningtotheradio.....................27 OtherFunctions...........................28 SleepTimerSetting......................28 Dimmer...............................28 Mute.................................28 UsingtheHeadphoneJack................28 SelectingtheInputSource.................28 XTS(ExcellentTrueSound)................28 XTSpro...............................28 Reference LanguageCodeList.......................29 CountryCodeList.........................29 Troubleshooting........................30-31 Specifications............................32 Introducin Before Use Playable Discs ote on DTS-encoded CDs playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. When DVD (8cm/12cmdisc) DVD audio discs (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) Audio CD Disc-related terms (8cm/12cmdisc) In addition, this unit SVCD and CD-R or MP3, WMA, JPEG DVD-RW, DVD+RW, CD-RW that contains audio titles, can or play a DivX files. Title (DVD only) The main film content accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily. otes Depending the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. on Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Group (DVD audio discs The main audio content only) or accompanying feature con- tent or additional feature content, or music album. Each otes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions or supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the group is assigned a group reference number you to locate it easily. Scene On enabling (VCD) Video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. unit. Types Regional code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVDs 3 indicates which type of player can play those discs. This unit can only play DVDs labeled "3" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 There of Video CDs are two types of Video CDs: Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc. To use volatile such liquids, as or turn off the contact with the unit for a leave marks Cleaning a use a Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable temperature increase inside the car. light, as Cleaning discs Fingerprints or and dust the disc on reduce sound with a clean Before quality. cloth. Wipe distort the can picture clean the disc playing, the disc from the centre out- wards. on insecticide spray, or the surface. the unit Do not To clean the cabinet Use store the disc in its case. plastic products in long period of time. They will the unit. Do not leave rubber near radio, playing, the exterior surfaces clean keep Do not or discs soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzene, or use thinner, are moistened with a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. "" may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc Disc on Discs Handling get on for instructions following symbol is represented by the symbol. one to the disc DVD-Video disc. of the DVD-A DVD Audio discs. Video CDs with the PBC (playback control) function. will not VCD1.1 the surface. Do not stick paper symbols specific DVD and finalized DVD±R/RW. Do not touch the Hold the disc that DVD-V VCD2.0 playback side of the disc. by the edges so that fingerprints on A section whose title has applicable only Notes symbol display Video CDs without the PBC (playback control) function. or tape on the disc. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel MIC 1/MIC 2 Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON microphone to MIC 1 or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to (USB a MONO/STEREO/ USB port of multimedia memory PAUSE/STEP etc.) TUNING(-/+)/SKIP(-/+) STOP buttons Power Cord SPEAKER connectors FM Antenna connector AV2 AUDIO Input (L/R)/VIDEO IN Connectors L AUDIO R AV2 IN AM Loop AV1 IN Antenna connectors S-VIDEO OUT connector OPTICAL IN MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO Do not touch the inner panel. Electrostatic damage to the unit. 6 a TV with Y Pb Pr Input (L/R)/VIDEO pins of the jacks on the rear discharge may cause permanent inputs. IN Connectors connector Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) or Selects input TV DVD SLEEP (FM and AM bands) tuner 0-9 numerical buttons directly or select numbered options in at a Selects sound. AUDIO SOUND MRAKER - SEARCH Removes the setup PRESET/ Marks CH audio an language (DVD) audio channel (CD). or Accesses the Accesses On-Screen Selects the TV's DVD disc. Acknowledges the forward. REVERSE Select programme of TV playback. Displays the disc's Title SKIP(>) VOLUME To PROG. Program a radio station's D.INPUT (+/-) adjust speaker volume and PAUSE/STEP menu. frequency into Pause playback STOP (x) (X) ZOOM CLEAR track number on the Enlarges the program menu or a mark MARKER SEARCH on the DIMMER a TV volume. Stops playback. the tuner. Removes menu, if available. PLAY (B) Starts playback. MEMO. Enter Radio. TITLE Search forward*/go to next chapter or track. or removes or To tune in the desired radio station. SKIP Search backward*/go to beginning of current chapter or track or go to previous chapter or track. Accesses selection. TUN(-/+) (b/B): SKIP(.) FORWARD menu PRESET/CH(+/-) (v/V): SLOW-/+(t/T) Reverse/ Forward slow source. ENTER SCAN SCAN-/+(bb/BB) or display. b/B/v/V (left/right/up/down) Selects an option in the menu. - . Search backward menu. INPUT SETUP setup menu MENU menu on a MARKER SEARCH DISPLAY .. Selects the sound mode. or removes point during playback. a Displays + SOUND MODE Accesses menu. SEARCH AUDIO an language (DVD). MARKER enjoy great sound effect. Selects subtitle a RETURN XTS To automatically. speakers. SUBTITLE natural and realistic more off SUBTITLE XTS pro enjoy System to turn specified time. only) SLEEP Mute the a menu. To TV MUTE service, programme number a (LG Set the MUTE Select source. To control the TV. BAND System's and closes the disc tray. AUX accesses Select the (Z) menu. DVD video image. Press to change brightness of the display window on the front panel dur-ing in power-on status. REPEAT Repeat chapter, track, title, all. REPEAT A-B D.INPUT Repeats sequence. To select a digital input source. USB ECHO VOL.(V/v) To Adjusts echo volume. MIC enjoy the multimedia files. VOL.(V/v) Adjusts microphone volume. Remote Control Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction in front of the remote sensor Remove the remote battery battery cover on control, and insert AAA) batteries correctly. with installation the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. sure high-definition or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD Receiver. a Connect the COMPONENT VIDEO OUT Caution Make pro) the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input on jacks from the DVD/CD Receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). Rear of TV VIDEO INPUT S-VIDEO protection system. INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb Pr L S-Video connection Connect the S-VIDEO OUT jack on the DVD/CD Receiver to the S-VIDEO IN jack on the TV using S-Video cable (S). the Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable V S jack jack on using C the supplied (V). Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT DVD/CD Receiver to TV using an Y Pb Pr jacks from the the corresponding in jacks on the cable (C). L AUDIO R AV2 IN AV1 IN Rear of DVD/CD Receiver otes Set the Progressive to "On" on the Setup progressive signal, see page 15. Set the to "Off" menu for any disc from the unit and close the disc tray. see that "no disc" is displayed on the display window. Then, press progressive by removing STOP and hold it for five seconds before Progressive scan video connections does not work with the analog (yellow VIDEO OUT jack) or S-VIDEO connection. 8 releasing it. Connections (Continued) Optional Equipment 1 2 3 4 Connections Connect a VCR to the AV IN connectors. Connect a additional VCR to the AV2 connectors. Connect an of DVD optical output Connect the USB port of a USB Player (or Digital Memory (or MP3 Device etc) player, etc.) Prepa tion to the OPTICAL IN connector. to the USB HOST on the front of the unit. VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT DVD Player (or Digital Device, etc) (L/R)/ VIDEO OUT OPTICAL OUT USB MP3 Memory, Player (or Memory Card Reader, etc.) To AUDIO IN (L/R)/ (AV1) VIDEO IN To AUDIO IN VIDEO IN (L/R)/ (AV2) L AUDIO R AV2 IN AV1 IN otes If the audio format of the produce a digital output strong, distorted sound does not match the or no capabilities of your DVD/CD Receiver, the receiver will sound at all. The DivX files in your memory card will not be able to be play. Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Connect the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial aerial Loop (supplied) (supplied) L AUDIO R AV2 IN AV1 IN otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire aerial. After connecting the FM Wire aerial, keep it as horizontal as possible. 9 Connections Assembling the (Continued) and Connecting to Speakers The front and speaker rear stands are detached from the stands. Connect the as Connection Connect the the speakers using supplied speaker cords. speakers assemble the front and Speaker System rear speaker speakers cords and from To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). speaker illustrated. Front speaker (Left) Front Connect the speaker terminals the bottom of each front and speaker (Right) appropriate terminals on the bottom of each front and rear speaker. After connecting the speaker cords to the appropriate on cords to the speaker and attach the the speaker stands. front and rear the rear speakers to Rear speaker (Right surround) Rear speaker (Left surround) Center speaker Subwoofer ote You cannot detach the speaker from the stand after bling the front and rear speakers. To hang the centre speaker assem- on a wall You 1 2 can hang the Centre Speaker Detach the stand bottom of the by rotating the Centre Speaker. Attach the stand rear of the by rotating Centre Speaker. wall. on a the screw on screw on the the otes Be sure 3 10 Hang it via hole on the Speaker on the screw. rear side of the Centre speaker cable to the appropriate If the cables the components: + to + and to reversed, the sound will be distorted and will lack base. terminal are to match the If you on -- --. speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Do not remove the front cover of supplied speaker. use front Connections (Continued) Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subto play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want connect a subwoofer. woofer). ? ? ? Front speakers According to your listening position speakers to 45 degree. set up the speakers for equal distance. And by hearing position set up the interval between Centre speaker The centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room size, if the audience is 90 than the listener 's - cm near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 11 Prepa tion Before Mini Operation for Audio Stream & Glossary Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of quality digital transparent audio(which masters) and results in identical to the original exceptional clarity throughout a means degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. true 360 When DVD is inserted You the change can Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) (For example 3 ENG ) by pressing AUDIO button, button repeatedly. D 2CH Bypass Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Digital 2 ENG D 2CH press SOUND Music Movie or Matrix The " " After you select 5.1 channel b) (For example 1 ENG D 5.1 CH or 4 ENG ) by pressing AUDIO button, DTS 5.1 CH -" - " press SOUND button. indicator will be displayed on the TV screen. "BYPASS" indicator will be only displayed on the display window. (II) Dolby Pro Logic II creates five full-bandwidth channels from two-channel an sources. output This is done using advanced, high-purity matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. BYPASS HALL STUDIO CLUB THEATER 1 PL ll MOVIE CHURCH PL ll MUSIC PL ll MTRX BYPASS... → → → → use quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use → → with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that the → → → The Movie mode is for approaches When Video CD is inserted with any stereo music ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. recordings. When CD is inserted MATRIX mode: Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the following order. The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be BYPASS HALL STUDIO CLUB THEATER 1 PL ll MOVIE CHURCH PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → For your reference ? You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. - - BYPASS - Software with multichannel surround audio played according signals to the way it was recorded. is ote When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). When you microphone, you can't enjoy 5.1 channel channel sound will out by the influence of the use a output. Only 2 microphone system. 12 Before Operation (Continued) On-Screen Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: You display can the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY 1 during playback. Chapter 2Pressv/Vtoselectanitem. The selected item is highlighted. Number 1/12 b / ENTER Time search 0:20:09 Numbers, ENTER Audio 3 Press b / B to change the the number buttons if use inputting the title setting. You can appropriate (e.g. number). For press ENTER to execute the some also A-B Repeat title Repeat sequence Resume Action play b/Bor AUDIO functions, setting. ABC prohibited or point otes If no button is screen all of the features pressed for 10 seconds, display disappears. b/B Example: On-Screen Display during playing VCD not available provide b/B Bypass Selection Method Items Some discs may not shown below. b/Bor SUBTITLE 1/3 Sound from this 1 ENG Angle PLAYBACK STATUS/RESTRICTIONS Title language and Digital Audio Output mode Subtitle language Prepa tion B, Numbers the on- Track Number (or PBC mode) 1/3 b / B, Numbers ENTER Time search Numbers ENTER 0:20:09 b/Bor Audio Channel AUDIO Sound Bypass b/B Example: On-Screen Display during playing DVD Audio Selection Method Items Group b / Number ENTER b / Track Number B, Numbers ENTER Time search 0:20:09 Audio language and Digital Audio Output mode Subtitle language B, Numbers Display only b/Bor AUDIO OFF ABC Display only b/B Page (or Angle) or 1/3 13 Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu By using item, To see display the menu. SET UP will take you back to initial To go to the next level: The setup Select v / menu V to audio), appears. select the desired / V to as option v / V well as alternate setting move to for the setting(s). option the third level. Original require or Select for the Setup menu setting and on-screen DVD-V display. DVD-A you prefer for the audio track subtitles, and the disc menu. language was Refers to the original language (disc in which the recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language code, press CLEAR on the remote control. then press DISPLAY ENTER to confirm your selection. Press SET UP language Original: disc the second level. to select the desired Some items 5 then select the second desired then press B to 4 Disc Menu Disc Audio / Subtitle / Menu press The screen will be shown the current v a Select the B to move to Use Off OSD Operation selected item, 3 Disc Subtitle Move Press SET UP. Use Original screen. the remote control. on General 2 Disc Audio A second press of To go back to the previous level: Press b on the remote control. Use English and exit the Menu: Press SET UP to 1 OSD pages 14 to 17. display Press B LANGUAGE additional steps. PLAY to exit the DISPLAY setup menu. TV 16:9 Aspect Display Mode Progressive Widescreen Off Scan Move TV Aspect DVD-V 4:3: Select when a 16:9: Select when Display Mode Display Mode Select DVD-A standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD-V setting DVD-A works only when the TV Aspect mode is set to "4:3". upper and Displays a wide picture with lower portions of the screen. Panscan: Automatically displays the wide picture and cuts off the portions that do not fit. Letterbox: the entire 14 screen bands on the on Before Operation (Continued) Progressive Scan AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has of audio output options. Set the DVD/CD Receiver's AUDIO options according to If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) 1 Select menu set signal, Progressive Scan "Progressive Scan" on use. Prepa tion AUDIO If you are using the Component Video jacks for connection to a TV or monitor that is compatible with scan variety the type of audio system you television, set Progressive Scan to Off. progressive a 5.1 a to On. Select Speaker Setup DRC On Vocal On the DISPLAY then press B. DISPLAY TV Move Off Aspect Display Select On Mode Progressive 5.1 Scan Speaker Setup DVD-V DVD-A Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25) Move 2 3 4 5 Select "On" using the v / V Select Dynamic Range Control (DRC) buttons. DVD-V appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. menu ENTER will set the DVD/CD Receiver Pressing to Progressive scan possible, thanks to digital audio technology. However, dynamic range of the you may wish to compress the audio output (the difference between the loudest sounds and the at a quietest ones). Then, you may listen to a movie lower volume without losing dialog intelligibility. Set DRC to On for this effect. mode. otes ote Progressive Scan menu DivX With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation Press ENTER to confirm your selection. The confirm menu will appear. When the confirm DVD-A will not be displayed in the setup when the VIDEO OUT SELECTOR switch is set at SCART position. The DRC function works depending Caution Vocal of recorded discs. Dolby Digital The level of only during playback Dynamic Range Compression on may differ the DVD disc. DVD-V Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Set Vocal to On only DVD is The karaoke channels mix into playing. a when a multi-channel Karaoke on the disc will normal stereo sound. Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP (x) for five seconds then release it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. 15 Before LOCK Operation (Continued) Password (Parental Control) You LOCK Rating Unlock Password **** 1 2 Code Country can 3 highlighted. Enter the new 4-digit code, Input it again to verify. 4 Press SET UP to exit the control information certain scenes on that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or 1 to rated control feature allows you to block access below the rating you input, thereby preventing parental to scenes your children from being able to view material you believe is unsuitable. Select 1 "Rating" on the LOCK menu then, press 2 forget your Security Input the 6-digit number security code is and the 2 Enter a new code as When " the Rating, Password and Code features, you must input the security code you created. If you have not yet entered prompted to do so. a security Country 4-digit code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3Selectaratingfrom1to8usingthev/V buttons. Rating 1-8: Rating and rating eight (8) one (1) press STOP "210499" on clear it using the setup menu cleared. " appears on the TV screen, and then press SET UP to move to the (x) menu. Country Code DVD-V country/area whose standards used to rate the DVD-Video disc, based in the reference chapter. were 1 2 3 has the most restrictions is the least restrictive. can described above. INPUT PASSWD Enter the code of the access Code ote setup B. To menu. If you forget your security code you the following steps: from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The then press ENTER. Select DVD-V for children to view. change password. Select Password on the LOCK menu then press B. Follow step 2 as shown left (Rating). "Change" or If you Some movies contain enter or "New" is Move Rating (Security Code) Select "Country Code" on on the list the LOCK menu, then press B. Follow step 2 as shown left Select the first character Shift the (Rating). using v / V buttons. using B button and select character using v / V buttons. cursor the 4 second 5 Press ENTER to confirm your country code selection. Unlock If you select unlock, parental control is not active and the disc plays in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available on not played unless an alternate scene the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same rating selection, then press SET UP to exit the menu. 4 Press ENTER to confirm your 16 Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn on the audio system and select the input source connected to the Operation DVD/CD Receiver. Select Move PBC Set Press OPEN/CLOSE 1 VCD Playback Control (PBC) On: Video CDs with PBC to On or Off. played according are to the played are the same 2 up. When a double-sided DVD is inserted, make the side you want to play is facing down. as Press OPEN/CLOSE 3 READING appears starts DivX(R) Registration You can DivX show the DivX DRM Management) Registration Your Please the registration use code is this code to DivX(R) : the To learn unit only. more tray. the TV screen, and playback If playback does not start, on menu might appear XXXXXXXX If Video On Demand service. DivX(R) to close the sure instead. register this player with This will allow you to rent and using your automatically. (Z) press PLAY. In some cases, the disc (Digital Right code for tray. facing way Audio CDs. to open the disc Load your chosen disc in the tray, with the label PBC. Off: Video CDs with PBC (Z) purchase The a menu screen displayed may be displayed first after Video CD which contains a menu. menu screen videos DVD Video On Demand format. is or loading a go to www.divx.com/vod DVD-V Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Use the b/B/v/V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE The an encrypt movie file. If you rent the DivX VOD file, it has several viewing limits as show below. Display the number which you ? DVD MENU to return to the menu screen. DVD-A otes ? or can video, or stop playback, play turn off your Do you want to a different of your 7 views Yes VCD2.0 Use the number buttons to select the track you want to view. Menu setting the menu screen. and the exact operating procedures for depending on the disc. may differ Follow the instructions on the each using player. use one watch the file. of Press RETURN to return to the This rental video has 7 views left. A view ends when you options Use the b/B/v/V buttons to select an option you want, then press ENTER to view the option. menu menu screen. now No You also may set PBC to Off under setup. otes ? The rental has been expired. This rental is expired. If Parental Control is set and the disc is not within the Rating settings (not authorized), Display the authorization This video player error. is not authorized to play this video. 4-digit code must be entered and/or the disc must be authorized "Parental Control", DVDs may have a ? the (see page 16). region code. on Your receiver will not play discs that have code different from your receiver. The this player is 3 (three). region region code a for DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described the remote control. Some features may also be available on the Setup use 1 2 Moving DVD-V DVD-A When move disc has to another more than title/group one as title/group, you can 1 follows: Press DISP., then press the appropriate numbered button (0-9) to select a title number. Moving DVD-V When a disc has title VCD2.0 on a more as Press . or VCD1.1 disc has than chapter/track one more DivX than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons two-digit numbers, press (0-9) in rapid succession. Slow Motion Press SLOW -/+ (0-9). VCD2.0 during VCD1.1 Press m or t 1/2 or T 1/2 required speed: (backward), or T (forward). or M VCD1.1 during playback. go into SEARCH mode. now to select the repeatedly To exit SEARCH mode, press PLAY. DVD-V To repeat the REPEAT. DVD-A - VCD2.0 currently playing chapter, press Repeat Chapter icon appears Repeat Title icon appears To exit DivX VCD1.1 Repeat Chapter/Title/Off To repeat the title currently REPEAT a second time. on the TV screen. playing, press on the TV screen. REPEAT Repeat mode, press a third time. The t 1 Repeat Off icon appears reverse is not applicable for 3 the TV on screen. Repeat Track/All/Off currently playing, press Repeat Track icon appears on To repeat the disc currently REPEAT a second time. Repeat To exit All icon appears on the TV playing, press the TV Repeat mode, press screen. screen. REPEAT a third time. The Video CD. - To repeat the track REPEAT. The 2 ote playback or M VCD2.0 required speed: mX2, mX4, mX8, mX16, mX100 (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). The in DVD-A The DVD/CD Receiver will Video CDs To exit slow motion mode, press PLAY. Slow motion DVD-V pause. Use the SLOW -/+ to select the 1/16, t 1/8, t 1/4 1/16, T 1/8, T 1/4 go into PAUSE advance the can Press m The the numbered buttons DVD-A now picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. The The receiver will enter SLOW mode. 3 You DVD-Video discs 3 DVD-V DivX during playback. The DVD/CD Receiver will Repeat 2 For 2 3 1 ote 1 2 to another CHAPTER/TRACK DVD-A VCD1.1 Press PAUSE/STEP Search a VCD2.0 DVD-A mode. menu. to another TITLE/GROUP Frame-by-frame playback Repeat Off icon appears on the TV screen. ote On Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 17. 18 a DVD or Video CD General Features Repeat To repeat 1 2 A-B a (continued) DVD-A a briefly Press A-B VCD1.1 DVD-V You from can on the TV start points To enter title: Press A-B at your chosen A- appears VCD2.0 Marker Search nine sequence in a playback starting point. screen. on a To cancel the sequence, press A-B. During VCD1.1 1 2 3 during playback. play appears on the The playing at on-screen dis- elapsed playing time of SEARCH. The "-:--:--" appears in the Time Search box. required the number buttons to start time. Enter minutes, and seconds from left to During hours, right the screen. to select a marker a scene. Marked Scene playback, press SEARCH. disc will appear menu on the screen. Press 1/2 to select the marker number that you want to erase. remove Press CLEAR. num- bers. Within 10 on the MARKER SEARCH menu, press The MARKER SEARCH in the If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct remove To clear box. 4 will start from the Marked Playback seconds, press 3/4 to select the Time Search icon in the on-screen display. enter the will appear menu Press ENTER. Within 10 use points number that you want to recall. To seconds, briefly. playback, press SEARCH. seconds, press 1/2 Within 10 the current disc. Within 10 screen Marked Scene a disc screen. The Time Search box shows the the TV on 1 to enter up to nine Marker The MARKER SEARCH Press DISP. to disc. To Recall The Time Search function allows you to start any chosen time on the disc. point. Up mark, follow these steps. The marker icon will appear begins. Time Search memorized a be memorized. can Repeat step VCD2.0 VCD1.1 memorize. again DVD-V VCD2.0 During disc playback, press MARKER when playback reaches the spot that you want to at your chosen end point. A-B appears briefly on the TV screen, and the repeat sequence 3 DVD-V Operation (Continued) The marker number will be erased from the list. seconds, press ENTER to confirm the 2 and 3 to erase additional marker Repeat steps start time. numbers. starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current To point. SEARCH. Playback remove Zoom the MARKER SEARCH menu, press DVD-V DVD-A VCD2.0 DivX VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. Press ZOOM during playback or still playback activate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to four steps. 100% size → 1600% size Use the 1 2 zoomed 400% size → → 800% → 100% size 3 4 buttons to move through the picture. ote The zoom function may not work for some DVDs. 19 to Operation DVD Video CD or Special Operation (Continued) DVD Features DVD-V DVD-A the contents of DVD Video discs: Menus Checking DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Alternatively, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. A typical DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is used for music, either Advanced Resolution multi-channel sound quality that is closer to the artist's master recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. ote To DVD-V Title Menu The a menu, the menu will appear on Otherwise, the disc screen. menu can list menu may appear. angles, spoken lanoptions, and chapters for the camera guage and subtitle title. DVD-V menu is DVD-A Language DVD-V Press AUDIO repeatedly during playback to hear different audio language or audio track. the Audio Channel a the DVD/CD to another GROUP 1. Press DISP. 2. Press 3/4 to select 3. Press 1/2 Group in on stop mode. icon. the numbered buttons (0-9) to select a Note: VCD2.0 VCD1.1 ote Sometimes the author of the disc creates hidden content that can on the disc. only be accessed by entering a pass- word. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's jacket appears, the feature is not available or during playback group number. Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT). If audio display. DivX Changing on analog groups. Your player enables you to quickly access different groups during playback via the on-screen displayed. the Audio Changing 5.1 channel Some DVD Audio discs divide content into different DVD-A Press MENU. The disc use receiver). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. Moving Disc Menu and surround effect of quality output (5.1CH AUDIO OUT jacks If the current title has the maximum sound DVD Audio, you must Press TITLE. 1 2 DVD-A enjoy cover or on a isn't dictated by web site). This password your DVD/CD receiver --- it is control a function of the disc. Subtitles DVD-V DivX Press S-TITLE repeatedly during different subtitle languages. Since the playback to see the otes The subtitle file of the DivX file is displayed only smi, srt and sub. If there is no information or there is a code that can not read in the DivX file, "1/1" etc are displayed. DVD Audio Discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio a new disc format provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). 20 can the the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. Viewing another PAGE Since DVD Audio discs are various ways to 1. Press DISP. 2. Press 3/4 to select 3. Press 1/2 to select lot of content, there what's available on the disc. can see hold a during playback. Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the the the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. Audio CD Playing Disc an CD MP3/WMA Disc or Operation Audio CD and MP3/WMA MP3 Repeat You WMA can Track/All/Off play a title/chapter/all/track 1 Press REPEAT when The DVD/CD Receiver recordings CD-ROM, CD-R, on MP3/WMA formatted play can or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. ? 1/12 Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 playing a MP3 on a WMA disc. disc. The repeat icon appears. ? 0:00:00 CD ? desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): Search CD 1 Press m or or MP3 Operation play repeatedly. WMA Mduring playback. The receiver will 2 Press m a now M go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). required or MX2, 3 To exit SEARCH mode, press PLAY. MP3 / WMA 1. Press v / V to select see 2. a folder, and press ENTER to the folder contents. MP3 / WMA disc Press v / V to select a track then press PLAY ENTER. Playback starts. or with this player 48 Sampling frequency: within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz (MP3), The DVD/CD Receiver cannot read an limited ? as compatibility is follows: within 32 - - 0:00:00 1/104 ? MP3 List Program ? 1-Music1 - MP3/WMA 2-Music2 file that has 3-Music3 file extension other than a 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 ? 7-Music7 ? otes and press ENTER. ? On move to the next page. CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and a MP3/WMA JPEG word or use b lighted. Then, menu is high- / B to select MP3/WMA or JPEG on top of the then press ENTER. Pause CD WMA playback, PAUSE/STEP again. track or or to return or playback briefly to MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. File names should have a maximum of 8 letters and must incorporate They should not .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. CD step back are press requires discs and recordings to the optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go to the beginning of the current WMA to the next track. previous track. of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) case to achieve > Press . twice In press PLAY to another Track Press . If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is to meet certain technical standards in order to during playback. 2 To return to Moving ? format should be ISO 9660 This DVD/CD Receiver MP3 1 Press PAUSE/STEP physical impossible If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the v / V to highlight Press MENU to CD-R these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. during playback. 21 JPEG Disc Viewing a Operation JPEG disc JPEG JPEG disc play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. This unit Insert disc and close the tray. The JPEG menu appears on the TV 1 notes on ? a is limited player upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't Depending after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2760 x see an on-screen screen. display --- JPEG 2048 List with this follows: as can compatibility Preview pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 ?Some discs may be incompatible due to recording format or the condition of disc. JPEG Folder 7 JPEG Folder 8 ? Press 2 v / select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, remote to 3 V to the v / V buttons use on the and press ENTER. highlight If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While to the viewing a file, you can press STOP previous menu (JPEG menu). to move ips ? ? There four Slide : Speed options > (Slow), >> (Normal), >>> (Fast) and II (off). Use v/V/b/B to highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are JPEG SLIDE SHOW Use vVbBto press ENTER. highlight STILL PICTURE 1. to the (Slide Show) then JPEG Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide show, press PLAY PAUSE/STEP again. (. or >) to advance to the next or once previous TO ROTATE PICTURE Press b / B picture 22 during showing clockwise or while a press JPEG MOVING TO ANOTHER FILE Press SKIP or viewing a picture file. JPEG picture to rotate the counter-clockwise. copying into the ".jpg" CD layout. If the files have rename ? different Ensure that all the selected files have the extensions when ? a File them without names to be read the files by are Windows ".jpe" or ".jpeg" extensions, please as ".jpg" file. ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though Programmed Playback CD MP3 WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when below. Press REPEAT to select a disc. The repeat desired repeat mode. JPEG ? Program a 1/104 MP3 List playing icon appears. 2. 0:00:00 can Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu 2 Select or a track " on MP3/WMA Menu 1. place Repeat to 2. (Add)" place additional tracks on the list. can add all tracks in the disc. Select " icon (Add All)" then press ENTER. 3 5 Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional Select the track you want to start playing on the "Program" list. Press MENU to move to the next the list. ERASING THE COMPLETE PROGRAM Use v / V to select " (Del all)", then press ENTER. ote Press PLAY or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" list have To normal resume on LIST page. 4 " Press CLEAR. tracks ote You erase the "List", then press PROGRAM icon then press ENTER to the selected track on the "Program" list. select Use vVto select the track that you wish to from the Program list. back, select a played The programs are also cleared when the disc is removed. the once. playback track of on in from programmed playAUDIO CD (or MP3/WMA) list and then press PLAY. 23 Operation DivX Disc Using 1 Operation this DVD/CD Receiver you can play DivX disc. DivX disc disc and close the tray. The DivX appears on the TV screen. Insert a 0:00:00 menu as compatibility with this player is limited follows: ?A vailable resolution size of the DivX file is under 720x576 1/12 (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 Movie Folder 6 Movie Folder 8 ? 2 a folder, and press ENTER. A ? list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight " _ If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded file or audio is out- putted. ? If the file is recorded with ports If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. * some of 1-point unit supof the record level. GMC, the GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some Press STOP to exit. 4 " express in the DivX mark on the dis- is not interleaved, either video and press ENTER. 3 impossible code to may be displayed as play. Movie Folder 7 Press v / V to select (different by language). If there is file, it Movie Folder 5 by MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. otes ? Be sure DivX file ? ? ? ? to select "SUBTITLE ON" mode before playback ENTER every time. When the subtile has more than two languages in the a by pressing file, original subtile is only available. The Pro logic II Sound mode is not available for DivX file. Subtitle in Chinese will not be displayed during playback a DivX file. (Subtitle in English is available) Playable z ".avi ", DivX file ".mpg ", ".mpeg Playable Codec " format z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". The DivX files in your memory card will not be able to be play. Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz ? - within 24 ? Bit 40 24 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - (MP3), Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 2 3 4 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The setup Use v / menu B to move to Use v / appears. listener at the select the AUDIO V to option then press then press B to is highlighted. Press b / B to time. adjust the Distance of the selected Speaker Setup option the third level. "Select" move to ote You Press ENTER and 5.1 same speaker. the second level. select the V to Distance Speaker Setup menu adjust the distance speakers (left & right) only. can of Center speaker and Rear appears. Test AUDIO Press b / B to test the Adjust Speaker Size Front L 0 dB Distance 2 m 6 7 Rear Right (R) → → speaker. volume of test signals Front Rear Left (L) Right (R) → → SubWoofer Off Select 5 → Volume Test the volume to match the memorized in the system. Front Left (L) Center Small of each signals Move Return Use b / B to select the desired Adjust options using v / V Enter speaker. / b / B buttons. Press ENTER to confirm your selection. The unit returns to the previous menu. Speaker Select speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right)) a ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the speaker settings are fixed, you cannot change them. Volume Press b / B to adjust the output speaker. (-5dB +5dB) level of the selected ~ 25 Operation Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or If you load memorized, the latest stop switch off the player. tings ly recalled. a the TV Your remote control is DVD/CD Receiver as capable well of operating your limited functions of LG TV. as Follow the instructions below to operate for your LG TV. disc that has its set- position is automatical- 1 the remote control, press the TV to select the device to be operated. Before using To switch the remote control mode different device), be (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the The LG TV. a Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. Screen Saver The Setting appears when you leave the DVD mode for about five minutes. button screen saver player in Stop ote If the remote control does not System TV, try the other code Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select system (PAL, NTSC or a AUTO). When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected with Multi NTSC: system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. 26 (E/D) originally supplied Due to the variety or use operate your particular the remote control with the LG TV. of codes used (LG and Gold Star) by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every model of LG TV. Operation Presetting You can tuning, with Radio the radio stations preset 50 stations for FM and AM (MW). Before make sure that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND on the remote control until FM or 1 AM 2 And then every time you press BAND, FM and AM (MW) changes alternately. in the (MW) appears display Press and hold TUNING 3 appear in the 2 stereo then 3 a program) display window. window. Press PR(D/E) repeatedly to select the 4 A on Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To turn off the radio the remote control. the remote control to select on 5 the preset number you 6 Press PROG./MEMO. want. on the remote control automatic tuning, For automatic TUN AV 1, etc.,). (+) tuning TUN(-) repeatedly. press in step b or 2. TUN (+) B on press and hold TUN(-) b or B for about two seconds on the remote tuning, control. The station is stored. 7 For manual or the remote control again. Repeat steps (DVD/CD, or To listen to non-preset radio stations Use manual (D/E) want. Press POWER to turn the DVD/CD Receiver off preset number will flash in the display window. Press PR the remote control on preset station you select another function mode Press PROG./MEMO. FM appears in the or Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. until the when the DVD/CD Receiver tunes in (for display on release. station. "TUNED" and "STEREO" 1 (MW) The last received station is tuned in. or panel for about two seconds frequency indication starts to change, Scanning stops Press BAND until AM window. the front to the radio Listening 3 to 6 to store other stations. To select You preset radio station directly a can use the number buttons on the remote control to select a To tune in a station with Press TUNING a weak repeatedly or to tune in the station signal in step 3 then 9 manually. To clear all the stored stations Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is and then press cleared. in the display window PROG./MEMO. again, the stations are appeared If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 itself and change to mode. (within 3 seconds). For your reference If an FM program is Press MONO/ST. noisy panel so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo on the front effect. To improve reception Reorient the supplied antennas. ote If all stations have been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. To change already the preset number, follow the steps 5-6 as above. 27 Operation Other Functions XTS Sleep Timer You set the DVD/CD Receiver to turn off automati- can at a cally Setting specified time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF You (Excellent enjoy the vivid stereophonic sound of the digital original source without any signal distortion. Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: XTS- 1: When sound high display source front You the Headphone Jack Connect a stereo headphone PHONES connector. plug ( 3.5mm) into the The speakers are automatically disconnected plug in a headphone (not supplied). Selecting can use the VCRs Input or when you Source speakers. can operate both XTS- 1 and XTS- 2 other units connected to the AV Optical connector. Refer to the owner's manual supplied with the unit for further information on the operation. Press AUX and D.INPUT control to select the repeatedly on the desired input source. remote Each time you press this button, the mode of the function changes in the following sequence: AV 1: for selecting the analog signal from (L/R) & VIDEO AV 1 OPT: for The XTS- 2 mode is from 2.1 CH to 5.1 AV1 AUDIO IN IN Connectors. selecting the optical digital signal from AV1 VIDEO IN & OPTICAL IN Connector. otes The Optical input function is available only when other unit's Sampling Frequency is 32 96kHz. You can also select the input source by pressing FUNC. button on the front panel. ~ the temporarily disabled when changing CH and it is enabled when changing it to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON or 28 via the by playing the sound rear speakers same as the ote Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. IN effect woofer at the XTS- 2 mode. repeatedly. Mute You of sound at woofer simultaneously and it can complement the relative degrading of the sound pitch of the This function will change the brightness of the display window on the front panel during in power-on status. Using sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the XTS- 3: Press the DIMMER playing the movie with the weak bass relatively to the general music, it enforces the XTS- 2: Dimmer Sound) can ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. True → XTS-P OFF setting changes in Language Use this list to Codes your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 Country Choose a 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM PY Ukraine UA Czech Republic Denmark CZ JP PH United States US DK Japan Kenya Paraguay Philippines KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW AF Country Code Country Ethiopia Fiji SG SK 29 Refrnce Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD Receiver does not work. picture. ? Correction The power cord is disconnected. ? No disc is inserted. ? ? ? The TV is not set to receive DVD signal ? The video cable is not connected ? securely. sound or only a very low-level sound is heard. ? The equipment connected with the audio cable is not set to receive DVD ? The audio cables not connected are ? ? is ? Connect the video cable into the jacks urn on the TV. Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. The audio Select the appropriate video input mode on the TV so the picture from the DVD/ CD Receiver appears on the TV screen. ?Connect securely. playback picture into the Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is ?T signal output. ? The securely securely. ?T he connected TV power is turned off. no the power cord wall outlet. Plug lit.) output. There is service. Cause Symptom No of connecting The disc is cable is damaged. dirty. ?T the equipment connected with the audio cable. ? ? urn on it with Replace a new one. Clean the disc. poor. The DVD/CD Receiver does not start playback. ? No disc is inserted. ? Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) ? ? ? ? An unplayable The disc is placed upside The disc is not The disc is ?Amenu is disc is inserted. placed ? down. within the ? guide. dirty. on the TV ? ? ? screen. Insert disc. (Check the disc type, colour system and Regional code.) a playable Place the disc with the down. playback Place the disc on the disc tray inside the guide. side correctly Clean the disc. Press the SET UP button to turn off the menu screen. ? Loud hum heard. or noise is ? ? ? ? 30 The Rating The plugs level is set. and The disc is jacks are ? ?W them with a cloth tened with alcohol. dirty. dirty. The speakers and components connected poorly. Cancel the Rating function the rating level. ? are The DVD/CD Receiver is located too close to the TV. ? ipe or change slightly mois- Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. Refrnce tuning). ? No stations have been preset or preset stations have been cleared (when ? Preset the stations (page 27). tuning by scanning preset stations). The remote control does not work properly. ?T he remote control is not ? ? display ? remote sensor of the DVD/CD Receiver. ? The front panel is too dim. pointed at the ? The remote control is too far from the DVD/CD Receiver. There is an obstacle in the path of the remote control and the DVD/CD Receiver. The batteries in the remote control flat. Nothing display. is displayed on the front ? ? are ? panel ? Point the remote control at the remote sensor of the DVD/CD Receiver. Use the remote control within about 23 ft (7 m). Remove the obstacle. Replace the batteries with Press DIMMER on new ones. the remote control. 31 Specifications Power Power Refer to main label supply consumption Refer to main label Mass Gen ral External dimensions CD/ VD (W x H x D) Tuner [MW] 54 x 350 mm Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 35°C, Operation to wavelength More than 75 dB (1 kHz, NOP, 32 20 kHz LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 0.5 % 108.0 MHz Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 100W+100W(6Ωat1kHz,THD10%) Front: 100W + 100W (THD 10 %) - or 65.0 - 60 dB 140 - 108.0 MHz 522 - 10,000 Hz 1,620 kHz or 520 - 1,720 kHz 450 kHz Inputs Outputs AV IN, OPTICAL AUDIO Surround*: 100W + Subwoofer*: 200W 100W (4Ω (6Ω at 30 kHz, THD 10 %) at 1 Hz, THD 10 %) S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V) Satellite Speaker Centre speaker Type Impedance Frequency Response 1 Way 150 x H Speaker x - 1 Way D) (1m) Speaker 1 Way 150 86 dB/W Speaker 4Ω 20,000 Hz - 1 (1m) 40 - 1,500 Hz 82 dB/W 100 W 100 W 200 W 200 W 200 W 400 W 280x1200x280mm Weight 3 (LHS-75TBW) 6Ω 20,000 Hz 86 dB/W Input Power Input Power (W 3 Passive Subwoofer (LHS-75TBC) 6Ω Sound Pressure Level Max. - (Mono) Centre*: 100W Rated 74.0 MHz, 87.5 1 10.7 MHz (* Depending on the sound mode settings and the source, there may be no sound output.) Net Designs nm More than 70 dB Video output Net Dimensions Suplied Acesori 650 140 Hz to 20 kHz (LHS-75TBS) Speakrs status: Horizontal 5% to 85% Surround mode Amplifer x Laser Component AM 430 Temperature: 5°C S-video output FM kg Operating conditions Operating humidity Video output Video 3.9 2.5kg (1m) 500x83x90mm 240x450x390mm 0.84kg 9.18kg ?Speakers..........................6?Speakercables......................6 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 ?V ideocable.........................1 and specifications are subject to change without notice.