LG | LH-T3602SE | LG LH-T3602SE Owner’s Manual

LH-T3602SE_NA3SLLA_ENG
DVD RECEIVER
OWNER'S MANUAL
MODEL: LH-T3602SE
(Main Unit: LH-T3602
Speakers: LHS-36SES,
LHS-36SEW)
R
USB
Before connecting up, operating or repairing this
product,
please read this instruction booklet carefully and
completely.
CAUTION: The
CAUTION
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
CAUTION
the Power Cord
Most
appliances recommend they be placed upon
circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
concerning
a
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
dedicated
manual to be certain.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
shock to persons.
could result in electric shock
The exclamation
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
triangle
point
within
an
is intended to alert the
presence of
user
important operating
(servicing) instructions in the
accompanying the product.
equilateral
to the
and maintenance
literature
it, discontinue
replaced
with
use
an
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
unplug
appliance, and have the cord
replacement part by an
exact
LASER PRODUCT
that the
LASER APPARAT
PRODUIT
LASER
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION:
This
To
product employs
ensure
proper
owner's manual
Should the unit
use
a
Laser
of this
System.
product, please
read this
and retain it for future reference.
carefully
require maintenance,
contact
an
authorized
service center.
Use of
controls, adjustments
procedures
other than those
or the performance of
specified herein may result
hazardous radiation exposure.
To prevent direct exposure to laser
beam, do
not
try
in
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
or
mechanical
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
CLASSE 1
physical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
1
Periodically
authorized servicer.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
KLASS
fire.
of the
Protect the power cord from
CLASS 1
or
plug
is
easily
accessible.
Introduction
Maintenance and Service
MaintenanceandService.................3
Beforeuse.............................4
FrontPanel/RearPanel...................5
RemoteControl.........................6
Installation and
a
chapter
before
service technician.
HANDLING THE UNIT
Setup
TVConnections.........................7
Optional Equipment
Refer to the information in this
contacting
Connections
.
.
.
.
.
.
.
.
.
.
.8
When
shipping
AerialConnections......................8
SpeakerSystemConnection...............9
.10
Displaying Disc Information on-screen
InitialSettings.........................10
GeneralOperation......................10
Language...........................10
Display.............................11
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
.
.
.
.
.
at the
near
use
the surface.
surfaces
.
.
.
.
.
.
.
.
.
.
.
Dimmer...............................20
Mute.................................20
UsingHeadphoneJack..................20
XTS/XTSpro...........................20
VIRTUALsound........................20
SoundMode...........................20
insecticide spray
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
or
on
the unit
.16
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................16
ViewingaJPEGfile....................17
PlayingaDivXMoviefile.................18
.19
PresettingtheRadioStations
ListeningtotheRadio...................19
SleepTimerSetting.....................20
.
as
or plastic products in contact
long period of time. since they
leave marks
Cleaning
.
such
a
To clean the
.
liquids
with the unit for
Generalfeatures.......................14
.
volatile
the unit.
Additionalfeatures.....................15
.
packing
Do not leave rubber
Others..............................13
.
carton and
the exterior surfaces clean
Do not
5.1SpeakerSetup.....................12
Lock(ParentalControl).................13
original shipping
factory.
Keeping
Audio..............................12
Operation
save
the
the unit
Please
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The DVD/CD Receiver is
a high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
device. If the
are
dirty
or
diminished.
REFERENCE
Depending on the operating environment, regular
inspection and maintenance are recommended after
LanguageCodes.......................21
every 1,000 hours of
AreaCodes...........................21
For details, please contact your nearest authorized
service center.
Troubleshooting.....................22-23
Specifications.........................24
use.
3
Introduction
Before
To
of
Types
use
of this
Playable
Discs
DVD
read this
proper
product, please
owner's manual carefully and retain for future
ensure
use
(8cm/12cmdisc)
reference.
Video CD
This manual
provides
information
on
the
(VCD)
(8cm/12cmdisc)
operation
Audio CD
and maintenance of your DVD/CD Receiver. Should
require service, contact an authorized service
(8cm/12cmdisc)
the unit
location.
In addition, this unit can play a DVD-RW, DVD+RW,
SVCD and CD-R or CD-RW that contains audio titles,
About the
"
Symbol Display
"
MP3, WMA, JPEG
may appear
your TV display during
operation and indicates that the function explained in
on
this owner's manual is not available
on
that
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
specific
Used in this Manual
Note:
Indicates
special
notes and
operating
features.
Tip:
Code
Regional
Indicates
tips
and hints for
making
the task easier.
This unit has
unit. This unit
A section whose title has
is
applicable only
symbol.
of the following symbols
represented by the
one
to the disc
DivX files.
Notes:
DVD video disc.
Symbol
or
as
the
Notes
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
Codes
Most DVD discs have
globe
numbers in it
Video CDs
number must match your DVD
code or the disc cannot play.
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital
are registered trademarks of Digital Theater
Surround"
4
a
DVD and finalized DVD±R/RW
Audio CDs
Systems,
Systems,
"ALL".
Inc.
Copyright 1996, 2003 Digital Theater
Rights Reserved."
Inc. All
clearly
visible
on
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
Code" appears
on
the TV
screen.
Front Panel/Rear Panel
MIC 1/MIC 2
Connect
2
or
a
microphone
to MIC 1
or
MIC
PHONES connector
to both sockets.
STANDBY/ON
DISC
Tray
STANDBY indicator
Lights
mode
Press and hold down this button about 3
OPEN/CLOSE button
red when the
receiver is in
seconds, then press repeatedly
(off).
VOLUME controller
DISPLAY Window
Remote
sensor
TUNING(-/+)
/SKIP(.bb/BB>)
USB Port
Connect to
to select
other function.
Standby
a
MONO/ST./
USB port of
P./STEP
multimedia
(USB
Introducin
FUNC./PLAY
memory
etc.)
buttons
STOP
Power Cord
SPEAKER connectors
FM Antenna connector
L
AUDIO
R
AM
Loop
Antenna connectors
MONITOR OUT connector
AV1 AUDIO
Do not touch the inner
panel.
Electrostatic
permanent damage
Input (L/R)/VIDEO
pins of the jacks on
discharge may cause
the
IN Connectors
rear
to the unit.
5
OPEN/CLOSE
Remote Control
(Z)
and closes the disc
Opens
tray.
AUX
Selects
POWER
Select the
output
To
(CD/DVD)
source
System's
tuner
(FM
ly
directly
select numbered
or
options
in
Press to
Marks
enjoy great
Selects
an
DISPLAY
language (DVD)
(CD).
b/B/v/V
audio channel
Selects
Acknowledges
menu
Reverse/ Forward slow
Displays the disc's Title
VOLUME
To
playback.
program
VOL.(V/v)
Remote Control
track number
mark
on
the
on
the
menu.
RETURN
Removes the
setup
menu.
volume
Operation Range
Remote control
Remove the
the remote
About 30° in each direction in front of the remote
batteries. Never mix different
types
battery
of batteries
installation
cover on
control, and insert
Caution
new
battery
(size AAA) batteries with
aligned
correctly.
sensor
6
into the
frequency
MUTE
sensor
Do not mix old and
menu.
ZOOM
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
Angle:
a
menu or a
MARKER SEARCH
all
MIC
Program
CLEAR
sequence.
Adjusts microphone
radio station's
Removes
REPEAT A-B
Adjusts
a
tuner.
REPEAT
echo volume
or removes
MEMO.
Enter
PAUSE/STEP ( X )
PLAY (B)
VOL.(V/v)
adjust speaker volume.
Accesses
( . />)
STOP (x)
Repeats
menu, if available.
(+/-)
PROG.
REVERSE/FORWARD SKIP
ECHO
selection.
TITLE
forward.
Repeat chapter, track, title,
menu
To tune in the desired radio station.
DVD disc.
or
the
TUN.(-/+) (b/B):
.
SCAN/SLOW(bb/BB)
Search backward
menu.
Select programme of Radio.
MENU
menu on a
in the
PRESET(v/V):
SETUP
Accesses the
display.
(left/right/up/down)
option
an
ENTER
Selects the sound mode.
setup
menu.
language (DVD).
Accesses On-Screen
or
or removes
subtitle
Selects the VIRTUAL sound
SOUND
Accesses
MARKER SEARCH
a
VIRTUAL
AUDIO
audio
panel during
point during playback.
a
Displays
This button is not available.
an
of the
SUBTITLE
sound effect.
*
Selects
the front
on
SEARCH
sound.
To
change brightness
window
MARKER
natural and realistic
more
off automatical-
System to turn
specified time.
a
in power-on status.
XTS pro
enjoy
at
display
a
menu.
To
the multimedia files.
DIMMER
0-9 numerical buttons
service, programme number
a
enjoy
Set the
and AM
bands)
Select
source.
SLEEP
BAND
Select the
input
USB
DVD
(standard, alkaline, etc.).
the
rear
of
two R03
and
Installation and
Setup
TV Connections
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
Video connection
Connect the MONITOR OUT
Receiver to the VIDEO IN
Tips:
video cable
jack from the DVD/CD
jack on the TV using the
supplied (V).
your TV and other equipment you
wish to connect, there are various ways you could
Depending
on
connect the DVD/CD Receiver. Use
one
of the
connections described below.
Please refer to the manuals of your TV, VCR,
System or other devices as necessary to
Stereo
make the best connections.
Caution:
Make
sure
directly
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
protection system.
Rear of TV
VIDEO
INPUT
V
L
AUDIO
R
Rear of DVD/CD Receiver
7
Optional Equipment
Connect
Connections
Connect the
VCR to the AV IN connectors.
a
Connect the USB port of
player, etc.)
to the USB
USB
a
port
on
Aerial Connections
Memory (or
supplied
FM/AM aerial for
listening
to the
radio.
MP3
the front of the unit.
Connect the AM
Loop
aerial to the AM aerial
connector.
Connect the FM Wire aerial to the FM aerial
Rear of VCR
Front of DVD/CD Receiver
IN
connector.
OUT
VIDEO
Notes:
(L)
AUDIO
To
(R)
To AUDIO OUT
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
To AV IN AUDIO
prevent
noise
pickup, keep
the AM
from the DVD/CD Receiver and other
(L/R)/
VIDEO OUT
Be
Loop aerial away
components.
to fully extend the FM wire aerial.
connecting the FM Wire aerial, keep
possible.
sure
After
(L/R)/
VIDEO
L
AUDIO
R
AM
FM Wire aerial
To Remove the USB from the unit
1. Choose
a
different function mode
twice in
(x)
or
Loop
aerial
(supplied)
(supplied)
press the STOP
a row.
2. Remove the USB from the unit.
L
AUDIO
R
Notes:
Don't extract the USB device in
Music files
files
can
This unit
(MP3/WMA), image
played.
operating.
(JPEG)
files
and DivX
be
can
not
use
USB HUB.
Recommended
Memory Card
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16,32
Only use the memory cards recommended.
Devices which require additional program installation
-
-
when you have connected the unit to
not
In
a
computer
case
of
a
USB HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for porper
operation. A primary partition of drive is supported
to four. If there is an extention partition it is not
supported.
If the drive of USB device is two
folder is
move
to
displayed on
the previous
the
or
more,
a
up
drive
If you want to
after you select a folder,
screen.
menu
press RETURN.
Digital camera and mobile
8
are
supported.
phone
are
not
supported.
it
as
horizontal
as
Connection
Speaker System
Connect the
speaker cords to the speaker terminals.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
Be
sure
to match the
appropriate
--
to
terminal
If the cables
--.
speaker
on
are
cable to the
the components: + to + and
reversed, the sound will be
distorted and will lack base.
If you
use
front
rating, adjust
speakers
excessive output
on
the
carefully to
speakers.
About Ferrite Core
Be
sure
cables
(for connecting
core can
core
to this
1. Press the
to the
unit).
once on
core
2
core
stopper [a] of the ferrite
3. Close the ferrite
InstaliodSeup
1
speaker
reduce noises.
How to attach the ferrite
2. Wind the cable
input
avoid
(Optional)
to attach the ferrite
This ferrite
with low maximum
the volume
the ferrite
to open.
core
3
core.
unitl it clicks.
The
Attach the ferrite
length
short
Note:
as
here is
much
as
possible.
core near
the unit
(Refer
to the
fig.3
and
comment.).
80
mm
9
Displaying
Disc Information
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 10 to 13.
To
display
and exit the Menu:
Press SETUP to
display
the
A second press of
menu.
SETUP will take you back to initial
by pressing v / V and
setting by pressing b / B.
screen.
item
select the
or
on
Settings
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
--
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
GENERAL OPERATION
--
Subtitle
Angle
Sound
--
--
--
Selected subtitle.
Selected
angle/total
number of
angles.
no
button is
screen
Press SETUP. The
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
Selected sound mode.
Note:
If
1.
2.
pressed for a
display disappears.
few seconds, the
on-
or
Setup
menu
appears.
PLAY to exit the
option
Setup
then
menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Select
OSD
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
--
Refers to the
track
original language
the disc
was
Other
To select another
in which
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 21. If you enter the wrong language code,
--
buttons then ENTER to enter the
press CLEAR.
10
DISPLAY
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
Move
TV
Select
Aspect
4:3
Select when
--
16:9
Display
Display
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Mode
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
InstaliodSeup
on
the upper and lower
Panscan
on
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
do not fit.
11
AUDIO
5.1
Each DVD disc has
Set the receiver's
variety of audio output options.
AUDIO options according to the
a
type of audio system you
Press ENTER and 5.1
Speaker Setup
On
Vocal
On
Speaker
Front L
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
Control
(DRC)
Move
Return
2.
Use b / B to select the desired
3.
Adjust options using
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
4.
Then, you may listen
Select
without
losing clarity
a
movie at
a
lower volume
of sound. Set DRC to On for this
effect.
*1:
Dolby Digital only
Enter
speaker.
1
With the DVD* format, you can hear a program's
soundtrack in the most accurate and realistic
to
menu
AUDIO
Select
Speaker Setup
DRC
Size
Dynamic Range
for the built-in 5.1 channel
appears.
AUDIO
5.1
following settings
surround decoder.
1.
use.
Speaker Setup
Make the
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
selection
Speaker
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
mix into normal stereo sound.
on
the disc will
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
fixed, you
are
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
the Distance lets the speakers know how far
setting
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
same
time.
Press b / B to
adjust the Distance of the selected
speaker. (You can't adjust front / Woofer speakers)
Test
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the system.
Front Left (L) → Center
Rear
12
Right (R)
→
→
Front
Rear Left
(L)
speaker. Adjust
signals
Right (R)
→
→
SubWoofer
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
area
whose standards
used to rate the DVD video disc, based
page 21.
1.
Select "Area Code"
on
the LOCK
on
were
the list
on
then
menu
press B.
2.
Move
3.
Rating
Blocks
playback
of rated DVDs based
content. Not all discs
are
1. Select
the LOCK
"Rating"
on
on
Follow step 2
as
shown
previous paragraph
(Rating).
Select
4.
their
Select the first character
using
v / V buttons.
Press B and select the second character
using
v / V buttons.
rated.
menu
5.
then
Press ENTER to confirm your Area code selection.
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
Input
password
a
3. Select
rating
a
Rating
1-8:
restrictions
from 1 to 8
using
PBC
On
DivX(R) Registration
Select
InstaliodSeup
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
Select
Move
restrictive.
PBC
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Set
Playback
selection, then
enter
or
change password.
1. Select Password
2. Follow
step 2
as
on
the LOCK
shown above
then press B.
(Rating).
change the password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the
1.
Press SETUP to
2.
Input
the
ENTER.
display
as
played
the
same
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R) Registration" option
then press B.
registration code will appear.
Use the registration code to purchase
clear it
using
the
Setup
rent the
www.divx.com/vod. Follow the instructions and
a
disc for
playback
on
this unit.
menu.
6-digit number "210499" and
The password is cleared.
or
VOD service at
download the video onto
the
are
to
Audio CDs.
videos from DivX
can
played according
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
menu.
you
Off.
We
forget your password
If you forget your password,
following steps:
or
are
DivX(R) Registration
menu
To
If you
to On
Off: Video CDs with PBC
way
can
(PBC)
the PBC.
Password
You
Control
On: Video CDs with PBC
3.
Press ENTER to exit.
press
Note:
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
this unit.
13
Operation
General features
Buttons
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc tray.
or
During playback,
Press X
SKIP
Discs
Operations
Z
/
>)
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc, Video CD :4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
During playback, press REPEAT repeatedly to select
desired repeat mode.
DVD Video discs: Chapter/Title/Off
a
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
(AUDIO channel)
Press AUDIO
to hear
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
different audio channel
SLOW
14
Pause mode, press SLOW (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
a
Notes
general features:
on
Last Scene
If you press SKIP
(>) once during Repeat
Chapter (Track) playback, the repeat playback
Memory
This receiver memorizes last
that is viewed. The last
cancels.
scene
from the last disc
remains in memory
the disc from the receiver or
scene
if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
even
Zoom may not work on some DVDs.
The A-B repeat function is available only in the
current track.
Note:
This receiver does not memorize the
Additional features
switch off the receiver before
Time Search
To start
System
at any chosen time
playing
on
the disc:
Press DISPLAY
Press v / V to select the time clock icon and
window, press and hold P./STEP
"--:--:--" appears.
select
the
during playback.
start time in
required
seconds from left to
right.
If you enter the wrong
remove the numbers
to
you entered. Then
the correct numbers.
input
Press ENTER to confirm.
4.
remote control for
hours, minutes, and
numbers, press CLEAR
Playback
starts from the
NTSC:
PAL:
on
the front
panel
or
than 5 seconds to be able to
system (PAL, NTSC).
Select when DVD/CD Receiver is connected
Select when DVD/CD Receiver is connected
with PAL-TV.
playback
To enter
points.
a
more
Marker
a
start
can
the disc.
with NTSC-TV.
Marker Search
You
disc if you
When the selected system does not coincide with
the system of your TV, normal colour picture may
not be displayed.
selected time.
To enter
a
play
Select
1.
Input
of
to
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
2.
3.
scene
commencing
desired
point
the TV
screen
on
from up to nine memorized
at the
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
1.
During
disc
search
menu
2.
3.
Clear
a
Marked Scene
playback,
appears
press SEARCH. The marker
on the screen.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
marked
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
can play any marker by
the marker search menu.
inputting
its number
Screen Saver
The
Stop
appears when you leave the unit in
mode for about five minutes.
screen saver
15
Playing
This unit
an
Audio CD
Audio CDs
play
can
or
or
MP3/WMA file
MP3/WMA files
recorded media.
ENTER and
playback
or
1.
2.
Select
on
the "List", then press PROG.
Program
the list.
on
Note:
Music Folder 1
Music Folder 3
You
Track4
Music Folder 4
Track5
can
add all tracks in the disc. Select
"
(Add All)"
Music Folder 5
Track6
Music Folder 7
Track8
Music Folder 8
3.
Press MENU to
move
to the next page.
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
on
top of the
menu
is
4.
limited
as
highlighted.
"Program"
with this
player
is
follows:
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40
192kbps (WMA)
-
-
a
file extension other than
an
list have
Playback begins
in
played
once.
To
resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
".mp3"
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
format should be ISO 9660
?
playback MP3 / WMA files.We recommend
that you use Easy-CD Creator, which creates an ISO
9660 file system.
should have
maximum of 8 letters and
.mp3 or .wma extension.
special letters such as
must
incorporate
?
They
should not contain
?
The total number of files
an
a
?
*
:
"
<>letc.
on
the disc should be less than
requires
discs and
recordings
to
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
permission
is
required
in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the
copyright
owner.
Off(No display):
2.
a
a
desired repeat mode.
does not
Track from
play repeatedly.
"Program"
List
Use vVto select the track that you wish to
from the Program list.
Press CLEAR.
tracks
meet certain technical standards in order to achieve
Customers should note that
disc. The repeat
Alternatively,
select
"
erase
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
999.
This DVD/CD Receiver
a
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Erasing
1.
/ ?
playing
Press REPEAT to select
?
to
names
Tracks
Press REPEAT when
icon appears.
2.
CD-R
File
1.
/ ".wma".
?
physical
Repeat Programmed
MP3/WMA file
?
impossible
16
ENTER to start.
-
The DVD/CD Receiver cannot read
that has
?
or
-
within 24
?
compatibility
Press PLAY
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
5.
MP3 / WMA disc
?
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
page.
Tips:
?
icon
then press ENTER.
Music Folder 6
Track7
or
(Add)"
JPEG
Music Folder 2
Track3
track
1/104
List
Track1
Track2
a
"
additional tracks
place
0:00:00
MP3
Program
List
contain 300 tracks.
disc.
icon then press ENTER to place
the selected track on the "Program" list. Repeat to
1/12
Audio CD
a
select
functions. Refer to page 14.
0:00:00
Insert
Audio CD and MP3/WMA Discs:
track/file then press PLAY or
starts. You can use variable
a
playback
can
program
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
Note:
The programs
are
also cleared when the disc is removed.
Viewing
This unit
a
JPEG file
Zoom
JPEG
Each time press ZOOM the
order.
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
1.
can
Insert
notes
on
Zoom
disc and close the tray.
The PHOTO menu appears on the TV
y
the video
enlage
screen.
JPEG disc
limited
Preview
in the
Zoom off
Press V/b/m to reduce the video
PHOTO
List
on
Press v/B/M to
a
setting change
following
as
compatibility
image.
image.
with this
player
is
follows:
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
Depending
upon the size and number of JPEG
a long time for the DVD/CD
files, it could take
JPEG Folder 5
JPEG Folder 6
Receiver to read the disc's contents. If you don't
display after several minutes,
JPEG Folder 7
JPEG Folder 8
see an on-screen
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
2.
Press v / V to select
folder, and press ENTER.
a
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder list,
previous
remote to
3.
use
the v / V buttons
the
on
and press ENTER.
highlight
to
move
?
to the
?
four Slide
:
Speed options
(Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
>
are
(Slow),
>>
x
2048
pixels
and burn another disc.
on
the disc
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
Tips:
There
2760
The total number of files and folders
should be less than 999.
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP
previous menu (JPEG menu).
as
?
---
?
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
or
as
into the CD
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
shown
as
JPEG
image
files in
Explorer.
Slide Show
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER.
Still Picture
1.
Press PAUSE/STEP
Operation
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide show, press PLAY
PAUSE/STEP again.
Moving
(.
or
>)
once
to advance to the next
To rotate
while
or
viewing a
previous file.
picture
Press b / B
picture
press
to another File
Press SKIP
picture
or
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
17
Playing
a
DivX Movie file
DivX disc
as
this DVD/CD Receiver you
Using
1.
Insert
play
can
compatibility
with this
is limited
player
follows:
DivX disc.
?A vailable resolution size of the DivX file is under
disc and close the tray. The MOVIE
appears on the TV screen.
a
menu
800x600
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
45 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
code to express in the DivX
as
mark on the
impossible
"
file, it may be displayed
Movie Folder 2
Movie Folder 3
Movie Folder 4
"
_
display.
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the
screen
second, this unit may
normally.
per 1
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
the remote to
on
?
highlight
interleaved,
outputted.
Playable
press ENTER.
?
3.
4.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
Press STOP to exit.
Tips:
Press MENU to
On
move
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the
a
CD with
menu
is
highlighted.
not
over
30
operate
If the video and audio structure of recorded
file is not
and
frame is
".avi ",
Playable
either video
or
audio is
DivX file
".mpg ", ".mpeg ",
".divx"
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable
?
Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Notes:
Be
sure
to select "SUBTITLE ON" mode
subtitle file every time before
When the subtile has
original
subtile is
only
more
playing
than two
microphone
You
can
during
not
does not work
adjust
the DivX file
Notice for
by pressing
DivX file
languages
the
.
in the
file,
can
not be
during playing
a
played.
DivX file.
playing.
displaying
the Divx subtitle
display properly during playback,
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
is
18
displayed properly
Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz
-
within 24
sound mode and VIRTUAL sound
If the subtitle does not
Playable
?
available.
The DivX files in your memory card
The
a
?
Bit
40
48kHz
(WMA)
rate: within 32
320kbps (MP3),
192kbps (WMA)
-
-
-
(MP3),
the Radio Stations
Presetting
You
can
Before
Listening
preset 50 stations for FM and AM (MW).
tuning,
make
sure
Preset radio stations in the DVD/CD Receiver's
that you have turned down
the volume.
(MW)
memory first
on
the remote control until FM
appears in the
or
AM
Press BAND until FM
1.
window.
display
Press and hold
TUN.(-/+)
frequency indication
until the
starts to
Press PRESET +/-
change,
tunes in
Scanning stops
when the DVD/CD Receiver tunes in
a
one
remote
preset
Press PRESET +/-
5.
on
the remote control.
number will flash in the
on
display
repeatedly
preset
station at
Press PROG/MEMO
the remote control
Repeat steps
again.
To listen to
non-preset
Use manual
For manual
3 to 6 to store other stations.
a
station with
Press
TUN.(-/+) repeatedly
station manually.
a
weak
or
tuning,
signal
To select
press
or
(DVD/CD, AUX, USB).
radio stations
tuning
in step 2.
TUN.(-/+) repeatedly.
press and hold TUN.(-/+) for
the front panel.
tuning,
preset
a
on
control to select
For
and "ERASE ALL" is
the remote
appeared
and then press PROG./MEMO.
cleared.
in the
display window
again, the stations are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
to normal mode.
radio station
the number buttons
can use
Press and hold PROG./MEMO. for about two seconds
directly
the remote
a
to listen to
press 1 then 9
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
on
preset radio station directly.
preset station 4, press 4
control. To listen to preset station 19,
example,
in the
effect, but
the button
again
on
seconds).
noisy
panel so that "ST."
display window. There will be no
the reception will improve. Press
on
the front
to restore the stereo effect.
To
Note:
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
time.
in step 3 to tune in the
To clear all the stored stations
To
automatic
about two seconds
You
change
a
-
select another function mode
For automatic
To tune in
the remote
Press POWER to turn the DVD/CD Receiver off
The station is stored.
7.
on
To turn off the radio
window.
the remote control to select
on
appears in the
or
the preset number you want.
6.
(MW)
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
Adjust
panel
front
Press PROG./MEMO.
AM
the volume
3.
station.
A
or
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
for about two seconds
then release.
4.
the
The last received station is tuned in.
2.
(MW) changes alternately.
3.
on
window.
display
And then every time you press BAND, FM and AM
2.
radio stations"
(see "Presetting
left).
Press BAND
1.
to the Radio
improve reception
Reorient the supplied antennas.
a
the preset number, follow the steps 5-6
as
above.
19
Sleep
You
Timer
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
automatically at a specified time.
Each time you press XTS pro the
following order.
can
Press SLEEP to set the desired
1.
The SLEEP indicator and
display
sleep
XTS ON
The
unique
XTSON
When
check the time
Receiver turns off.
Press SLEEP. The
display window.
remaining
playing the movie with the weak bass sound
relatively to the general music, it enforces the
sense of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
remaining
before the DVD/CD
time appears in the
Dimmer
Note:
This function will change the brightness of the display
window on the front panel during in power-on status.
The XTS
Press the DIMMER
to 2.1 CH.
repeatedly.
Using Headphone
temporarily
disabled when
changing
changing
it
NORMAL
XTS-P and XTS mode tune off
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, "MUTE" indicator flashes in the
display window.
Connect a stereo headphone
PHONES connector.
mode is
from 2.1 CH to 5.1 CH and it is enabled when
Mute
you
XTS-P ON...
creates the
Note:
The
→
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
SLEEP180→150→120→90→80→70→60→50→40→
can
NORMAL
→
XTS-P ON
window.
30→20→10→OFF
You
in
time.
time appears in the
Each time you press SLEEP the
changes in the following order.
2.
sleep
setting changes
the
VIRTUAL sound
press VIRTUAL the
Jack
plug ( 3.5mm)
into the
speakers are automatically disconnected
plug in a headphone (not supplied).
when
setting
VIRTUAL sound.
Source
Display
Effect
2.1 ch.
VIRTUAL
3D STEREO
5.1 ch
VIRTUAL
Multichannel sound
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Multichannel sound
The Multichannel sound makes
ch sound therefore this mode
a
5.1 ch feel 10.1
provides
a
emotion
which you are involved with sound and you
feel detailed sound.
can
Sound Mode
You
one
the
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to. (2 ch. sound only)
can
of the
BYPASS
ON STAGE
STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
→
→
→
→
→
PL ll MUSIC
→
→
→
PL ll MTRX
Note:
Initial sound mode is BYPASS
20
→
BYPASS...
→
HALL
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
21
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
?
picture.
the power cord
wall outlet.
securely
Insert
that the DVD or,
Plug
The TV is not set to receive DVD
signal
?
Select the
?
sound
or
The video cable is not connected
?
The connected TV power is turned off.
?T
?
The
?
a very low-level
sound is heard.
only
connected with the
equipment
signal output.
The audio cables
not connected
are
?
is
the TV.
urn on
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
Connect the audio cable into the
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting
cable is
damaged.
dirty.
poor.
The DVD/CD Receiver
does not start playback.
input
screen.
The power of the equipment connected
with the audio cable is turned off.
?
video
jacks securely.
securely.
playback picture
appropriate
the
urn on
equipment
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the DVD,
audio CD indicator in the DVD
is lit.)
?
An
display
jacks securely.
audio cable is not set to receive DVD
?
The
(Check
Connect the video cable into the
?
securely.
no
disc.
mode on the TV so the picture from
the DVD/CD Receiver appears on the
output.
TV
There is
a
into the
audio CD indicator in the DVD
is lit.)
does not work.
No
service.
Cause
?
disc is inserted.
unplayable
Insert
a
playable
disc.
or
display
(Check the
Regional
disc type, colour system and
code.)
?
The disc is
?
The disc is not
placed upside
placed
down.
within the
?
guide.
?
Place the disc with the
down.
Place the disc
correctly
?
The disc is
?Amenu
?
Loud hum
heard.
or
noise is
The
is
dirty.
on
Rating
?
The disc is
?
The
the TV
screen.
level is set.
speakers
poorly.
are
The DVD/CD Receiver is located too
close to the TV.
22
guide.
?
Press the SETUP button to turn off
the menu screen.
Cancel the
rating
Rating
function
or
change
level.
?
Clean the disc.
?
Connect the
speakers
and
components securely.
connected
?
the disc tray
inside the
Clean the disc.
the
and components
side
?
?
dirty.
on
playback
?
Move your TV away from the audio
components.
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
Correction
positioned
or
connected
poorly.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
The
signal strength of the stations is
(when tuning in with automatic
tuning).
too
?T
une
in the station
weak
?
No stations have been preset or preset
stations have been cleared (when
?
Preset the stations
manually.
(page 19).
tuning by scanning preset stations).
The remote control
does not work
properly.
?
The remote control is not
remote
sensor
pointed
at the
?
of the DVD/CD Receiver.
Point the remote control at the remote
sensor
of the DVD/CD Receiver.
?
The remote control is too far from the
DVD/CD Receiver.
?
?
There is
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
an
obstacle in the
path
of the
Use the remote control within about 23
ft (7 m).
remote control and the DVD/CD
Receiver.
The front
display
panel
is too dim.
?
The batteries in the remote control
flat.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
23
Specifications
Power
Genral
Refer to main label
supply
consumption
Weight
Power
Refer to main label
Net
3.9
External dimensions
CD/ VD
Video
FM
Tuner
AM
[MW]
Amplifer
(W
x
H
x
D)
kg
430
57
x
x
295
Operating conditions
Operating humidity
Temperature:
mm
5°C to 35°C,
Operation
status: Horizontal
5% to 85%
Laser
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL 625/50, NTSC 525/60
0.5 %
Video output
1.0 V
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
45W
Surround mode
Front: 45W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 45W
Inputs
Outputs
AV IN, MIC
wavelength
650
nm
150 Hz to 18 kHz
More than 75 dB
(1 kHz,
NOP -6 dB, 20 kHz
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x
108.0 MHz
-
or
65.0
-
74.0
60 dB
140
522
(Mono)
1,620 kHz
-
or
520
-
1,720 kHz
450 kHz
+
45W
(Rated Output Power 30W, 4Ω at 1 kHz, THD 10 %)
45W (Rated Output Power 30W, THD 10 %)
+
Surround*: 45W
+
45W
Subwoofer*: 75W
(Rated Output Power 30W, 4Ω
(Rated Output Power 60W, 8Ω
P/NO
:
1
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Way
150
1
Speaker
Speaker
-
Passive Subwoofer
(1m)
45W
x
are
(LHS-36SEW)
1
Way
H
x
D)
subject
to
change
1
Speaker
8Ω
20,000 Hz
85 dB/W
Rated
3834RT0020N
at 30
4Ω
Sound Pressure Level
specifications
kHz, THD 10 %)
Hz, THD 10 %)
at 1
MONITOR, PHONES: (32 Ω, 1.0 V)
Type
Impedance
Frequency Response
and
108.0 MHz
-
8,000 Hz
-
(LHS-36SES)
Designs
1
MHz, 87.5
10.7 MHz
Front/Rear/Center
Speakrs
LPF/A-Filter)
More than 70 dB
65
-
1,500 Hz
87 dB/W
(1m)
75W
90W
150 W
105x99x83mm
175x351x270mm
0.45kg
3.4kg
without notice.
Download PDF

advertising