LG | LH-T7652SB | LG LH-T7652SB Owner’s Manual

LH-T7652SB_JA8CLLA_ENG
DVD RECEIVER
OWNER'S MANUAL
MODEL: LH-T7652SB
(Main Unit: LH-T7652
Speakers: LHS-76SBS, LHS-76SBC,
LHS-76SBW)
R
USB
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
CAUTION: The
CAUTION
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
(dripping
as
or
vases,
CAUTION
Most
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
a
(OR BACK)
appliances
dedicated
That
NO USER-SERVICEABLE PARTS INSIDE
is,
recommend
be
they
placed
upon
outlet circuit which powers only that
no additional outlets or branch
and has
circuits. Check the
PERSONNEL.
the Power Cord
circuit;
single
a
appliance
REFER SERVICING TO QUALIFIED SERVICE
concerning
specification
page of this owner's
manual to be certain.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
Do not overload wall outlets. Overloaded wall
loose
damaged
or
wall
outlets,
outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
shock to persons.
could result in electric shock
The exclamation
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
triangle
within
point
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
the
product.
it, discontinue
replaced
with
use
an
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Slots and
and to
openings
ensure
in the cabinet
reliable
operation
are
of the
provided for ventilation
product and to protect
it from
over heating.
openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
The
the manufacturer's instruction have been adhered to.
CLASS 1
LASER
KLASSE 1
LASER PRODUKT
LUOKAN 1 LASER
PRODUCT
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
LASER
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION:
This
To
product employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
service center.
Use of
controls, adjustments
procedures
other than those
or the performance of
specified herein may result
hazardous radiation exposure.
To prevent direct exposure to laser
in
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
Periodically
unplug
appliance, and have the cord
replacement part by an
exact
authorized servicer.
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
fire.
of the
Protect the power cord from
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
or
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the
plug
is
easily
accessible.
Introduction
Maintenance and Service
MaintenanceandService.................3
Beforeuse.............................4
FrontPanel/RearPanel...................5
RemoteControl.........................6
Installation and
a
chapter
before
service technician.
HANDLING THE UNIT
Setup
TVConnections.........................7
Optional Equipment
Refer to the information in this
contacting
Connections
.
.
.
.
.
.
.
.
.
.
.8
When
shipping
AntennaConnections....................8
Please
SpeakerSystemConnection...............9
.10
Displaying Disc Information on-screen
InitialSettings.........................10
GeneralOperation......................10
Language...........................10
Display.............................11
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
.
.
.
.
.
at the
save
near
ControllingtheTV......................15
.16
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................16
ViewingaJPEGfile....................17
PlayingaDivXMoviefile.................18
.
.
.
.
.
the surface.
Cleaning
.
.
.
.
.
.
.
on
To clean the
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
or
strong solvents such
use
thinner,
as
Maintaining
.
insecticide spray
the unit
unit.
.
as
or plastic products in contact
long period of time. since they
leave marks
.20
PresettingtheRadioStations
ListeningtotheRadio...................20
SleepTimerSetting.....................21
.
such
a
DVDAudioDiscs.......................19
.
liquids
with the unit for
Operation
Generalfeatures.......................14
volatile
use
the unit.
Do not leave rubber
Others..............................13
Additionalfeatures.....................15
packing
the exterior surfaces clean
Do not
5.1SpeakerSetup.....................12
Lock(ParentalControl).................13
carton and
original shipping
factory.
Keeping
Audio..............................12
the
the unit
these
as
might damage
alcohol, benzine,
the surface of the
.
the Unit
Dimmer...............................21
The DVD/CD Receiver is
Mute.................................21
device. If the
UsingHeadphoneJack..................21
Selectinginputsource...................21
XTS/XTSpro...........................21
VIRTUALsound........................21
SoundMode...........................21
REFERENCE
LanguageCodes.......................22
are
dirty
or
a high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
AreaCodes...........................22
Troubleshooting.....................23-24
Specifications.........................25
3
Introduction
Before
of
Types
use
Playable
Discs
DVD
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
(8cm/12cmdisc)
reference.
Video CD
This manual
provides
information
on
the
(VCD)
(8cm/12cmdisc)
operation
Audio CD
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
(8cm/12cmdisc)
In
addition, this unit
SVCD and CD-R
About the
"
Symbol Display
MP3, WMA, JPEG
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
Note:
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
is applicable only
symbol.
to the disc
of the
following symbols
represented by the
one
or
DivX files.
as
the
Notes
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
globe
DVD and finalized DVD±R/RW
DVD Audio discs
number must match your DVD
code or the disc cannot play.
Regional
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from
Digital
Theater
Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-
patents issued and pending. "DTS" and "DTS Digital
Surround"
are
Inc.
Inc.
clearly
visible
on
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Audio CDs
4
a
numbers in it
Video CDs
Systems,
Systems,
"ALL".
Codes
Most DVD discs have
wide
DVD-RW, DVD+RW,
titles,
a
Code
Regional
This unit has
unit. This unit
A section whose title has
play
CD-RW that contains audio
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
specific
Used in this Manual
Indicates
can
Notes:
DVD video disc.
Symbol
or
registered trademarks of Digital Theater
Copyright 1996, 2003 Digital Theater
All Rights Reserved."
Code" appears
on
the TV
screen.
Front Panel/Rear Panel
MIC 1/MIC 2
Connect
2
or
a
microphone
to MIC 1
or
MIC
to both sockets.
PHONES connector
STANDBY/ON
DISC
Lights
Press and hold down this button about 3
mode
OPEN/CLOSE button
red when the
receiver is in
Standby
sensor
port
Connect to
a
USB
MONO/ST./
port of
memory
TUNING(-/+)
/SKIP(.bb/BB>)
P./STEP
memory device
(USB
to select
VOLUME controller
DISPLAY Window
Remote
a
seconds, then press repeatedly
other function.
(off).
USB
Introducin
FUNC./PLAY
Tray
STANDBY indicator
etc.)
STOP
buttons
Power Cord
SPEAKER connectors
FM Antenna connector
L
AUDIO
R
AM
Loop
Antenna connectors
S-VIDEO OUT connector
Cooling
fan
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to
AV1 AUDIO
a
TV with Y Pb Pr
Input (L/R)/VIDEO
AV2 AUDIO
inputs.
IN Connectors
Input (L/R)/VIDEO
IN Connectors
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
5
AUX
Selects
DVD
output
To
BAND
Select the
tuner
System' s
(FM
and AM
directly
or
MARKER
Marks
Displays
Selects
enjoy great
an
audio
language (DVD)
audio channel
b/B/v/V
Selects
menu
or
Reverse/ Forward slow
Displays the disc's Title
VOLUME
To
Accesses
Enter
a
(X)
(B)
frequency
into the
MUTE
ZOOM
SLEEP
all
Set the
ly
at
a
System to turn
specified time.
off automatical-
DIMMER
sequence.
ECHO
VOL.(V/v)
Adjusts
echo volume
Press to change brightness of the
display window on the front panel
in power-on status.
MIC
VOL.(V/v)
To control the TV.
Adjusts microphone
volume
Remote Control
sensor
About 30° in each direction in front of the remote
sensor
Remove the
Remote
TV
battery
battery
only)
AAA) batteries
correctly.
types of batteries (standard, alkaline, etc.).
with
installation
cover on
Control, and insert
Caution
batteries. Never mix different
(LG
(See page15)
Operation Range
new
during
TV
Point the Remote Control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
6
radio station's
a track number on the
program menu or a mark on the
MARKER SEARCH menu.
REPEAT A-B
Do not mix old and
menu.
Removes
REPEAT
Angle:
Program
CLEAR
(./>)
STOP ( x )
Remote Control
or removes
MEMO.
tuner.
Repeats
menu, if available.
(+/-)
adjust speaker volume.
playback.
Repeat chapter, track, title,
selection.
PROG.
REVERSE/FORWARD SKIP
PLAY
menu
TITLE
.
forward.
PAUSE/STEP
the
TUN.(-/+) (b/B)
SCAN/SLOW(bb/BB)
Search backward
menu.
To tune in the desired radio station.
DVD disc.
menu on a
in the
Select programme of Radio.
MENU
Accesses the
option
an
display.
PRESET(v/V)
SETUP
setup
menu.
(left/right/up/down)
Acknowledges
(CD).
SOUND
or removes
setup
ENTER
an
Selects the sound mode.
Accesses
language (DVD).
Accesses On-Screen
sound effect.
or
subtitle
DISPLAY
AUDIO
Selects
a
Removes the
sound.
To
menu.
RETURN
natural and realistic
more
MARKER SEARCH
SUBTITLE
menu.
enjoy
point during playback.
a
SEARCH
service, programme number
select numbered options in a
XTS pro
To
the multimedia files.
Selects the VIRTUAL sound
0-9 numerical buttons
a
enjoy
VIRTUAL
bands)
Select
input
tray.
source.
USB
(CD/DVD).
source
and closes the disc
Opens
POWER
Select the
(Z)
OPEN/CLOSE
Remote Control
and
the
rear
two R03
of the
(size
aligned
Installation and
Setup
TV Connections
Make
the
of the
one
capabilities
following connections, depending
existing equipment.
on
of your
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
Tips:
S-Video cable
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
jack on the DVD/CD
jack on the TV using
the
(S).
Video connection
Connect the MONITOR OUT
from the DVD/CD
connections described below.
Receiver to the VIDEO IN
the TV
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
video cable
make the best connections.
Make
using
the
supplied (V).
Component
Video
(Color
Stream
)
connection
Connect the COMPONENT VIDEO OUT
Caution:
sure
directly
jack
jack on
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
the DVD/CD Receiver to the
on
the TV
using
an
Y Pb Pr
jacks from
corresponding in jacks
cable (C).
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
protection system.
Rear of TV
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
S
Pb
V
Pr
C
L
AUDIO
R
Rear of DVD/CD Receiver
7
Optional Equipment Connections
1. Connect
VCR to the AV IN connectors.
a
2. Connect the USB
player, etc.)
port
of USB
to the USB
port
Connect the
Memory (or
on
Antenna Connections
supplied
FM/AM antenna for
listening
to
the radio.
MP3
the front of the unit.
Connect the AM
Loop
antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
Rear of VCR
Front of DVD/CD Receiver
N
connector.
OUT
VID
Notes:
AUDI
To
AUDIO
USB
To AUDIO OUT
MP3
Memory,
Player (or
Memory Card Reader, etc.)
VIDEO OUT
Be
To AV IN AUDIO
prevent noise pickup, keep the AM Loop antenna away
components.
from the DVD/CD Receiver and other
(L/R)/
(L/R)/
to fully extend the FM wire antenna.
connecting the FM Wire antenna, keep
possible.
sure
After
VIDEO
as
L
AUDIO
R
AM
FM Wire Antenna
To Remove the USB from the unit
1. Choose
different function mode
a
twice in
(x)
or
Loop Antenna
(supplied)
(supplied)
press the STOP
a row.
2. Remove the USB from the unit.
To Remove the USB Device from the unit
L
AUDIO
R
1. Choose
different function mode
a
twice in
(x)
or
press the STOP
a row.
2. Remove the USB device from the unit.
Notes:
Don't extract the USB device while
Music files
files
can
This unit
(MP3/WMA), image
be played.
can
not
files
operating.
(JPEG) and
DivX
USB HUB.
use a
Recommended
Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16, FAT32
Only use the memory cards recommended.
Devices which require additional program installation
-
-
when you have connected the unit to
not
In
a
computer
case
of
a
USB
HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive
supported. If there is an extention partition, it will
be supported.
If the drive of USB device is two
folder is
move
displayed
to the initial
on
menu
Digital cameras
supported.
are
not
more, a drive
If you want to
after you select a folder,
the
or
screen.
press RETURN.
8
are
supported.
and mobile
phones
are
not
it
as
horizontal
Speaker System Connection
Connect the
speakers using
the
supplied speaker
Front
speaker
(Right)
cords.
To obtain the best
possible surround sound, adjust
speaker parameters (volume, distance, etc.).
Center
speaker
Front
speaker
(Left)
the
Notes:
Be
sure
to match the
appropriate
--
to
--.
terminal
If the cables
speaker
on
are
cable to the
the
components: + to + and
reversed, the sound will be
distorted and will lack base.
If you
use
front
rating, adjust
excessive
speakers
the volume
output
on
the
with low maximum
carefully
speakers.
to avoid
input
Rear speaker
(Right surround)
Subwoofer
Rear speaker
(Left surround)
InstaliodSeup
9
Displaying
Disc Information
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 10 to 13.
To
display
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
by pressing v / V and
setting by pressing b / B.
A second press of
screen.
item
select the
or
on
Settings
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
--
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
GENERAL OPERATION
--
Subtitle
Angle
Sound
--
--
--
Selected subtitle.
Selected
angle/total
number of
angles.
no
button is
screen
Press SETUP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
Selected sound mode.
pressed for a
display disappears.
few
seconds, the
Setup
menu
appears.
the current setting for the selected
alternate setting(s).
Note:
If
1.
item,
as
well
as
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
on-
or
PLAY to exit the
option
Setup
then
menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Select
OSD
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
--
Refers to the
track
original language
the disc
was
Other
To select another
in which
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 22. If you enter the wrong language code,
--
buttons then ENTER to enter the
press CLEAR.
10
DISPLAY
Scan
Progressive
Progressive Scan Video provides
pictures with less flickering.
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
Progressive
highest quality
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the receiver to a standard (analog)
Off
Scan
the
television,
set
Progressive
Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
Move
Select
a
progressive
scan
signal,
set
Progressive
Scan to
On.
To Turn ON
TV
Aspect
4:3
--
16:9
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
the
or
component out of the DVD/CD Receiver to
input of your monitor/television, set your television
monitor to
1. Select
Display
Display
Mode
Component Input.
"Progressive
setting
works
only
when the TV
Aspect
2. Select "On"
mode is set to "4:3".
Letterbox
Panscan
on
Displays a wide picture with bands
and lower portions of the screen.
--
--
Automatically displays
the entire
do not fit.
Scan"
the DISPLAY
on
menu
then press B.
Mode
the upper
scan:
Connect
Select when
--
progressive
screen
the wide
and cuts off the
3.
on
picture
portions that
Pressing
scan
using
the v / V buttons.
ENTER will set the
player
to
InstaliodSeup
Progressive
mode.
Note:
Progressive
menu
Scan cannot be selected in the
setup
when the VIDEO OUT SELECTOR switch is set
at SCART
position.
Caution:
Once the
setting for progressive scan output is
entered,
image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
an
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD/CD Receiver. Next, press
STOP
( x ) and hold it for five
releasing it. The video output will be
restored to the standard setting, and a picture will
once again be visible on a conventional analog TV or
on
the Remote Control
seconds before
monitor.
11
AUDIO
5.1
Each DVD disc has
variety of audio output options.
options according to the
a
Set the receiver's AUDIO
type of audio system you
use.
Make the
following settings
1.
Press ENTER and 5.1
On
Vocal
On
Front L
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
With the DVD*
Control
(DRC)
format, you
can
2.
hear
a
program's
3.
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to On for this
effect.
*1:
menu
AUDIO
Select
Speaker Setup
DRC
Size
1
Speaker Setup
appears.
Speaker
Dynamic Range
for the built-in 5.1 channel
surround decoder.
AUDIO
5.1
Speaker Setup
Dolby Digital only
4.
Move
Return
Use b / B to select the desired
Adjust options using
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
selection
Speaker
Select
menu.
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
mix into normal stereo sound.
on
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
the disc will
Size
Since the
change
speaker settings
settings.
fixed, you
are
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
the Distance lets the speakers know how far
setting
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
Press b / B to
speaker. (You
same
time.
the Distance of the selected
adjust
adjust
can't
front / Woofer
speakers)
Test
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
12
speaker. Adjust
signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
whose standards
area
used to rate the DVD video
disc, based
on
were
the list
on
page 22.
Select "Area Code"
1.
on
the LOCK
menu
then
press B.
Follow
2.
Move
step
2
as
shown
previous paragraph
(Rating).
Select
Select the first character
3.
Blocks
of rated DVDs based
playback
content. Not all discs
are
1. Select
the LOCK
"Rating"
on
on
Press B and select the second character
4.
their
v / V buttons.
using
Rating
using
v / V buttons.
rated.
menu
Press ENTER to confirm your Area code selection.
5.
then
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select
a
Rating
rating
from 1 to 8
using
PBC
On
DivX(R) Registration
Select
Rating one (1) has the most
rating eight (8) is the least
1-8:
InstaliodSeup
the v / V buttons.
restrictions and
Select
Move
restrictive.
PBC
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Set
Playback
enter
Off: Video CDs with PBC
or
change password.
1. Select Password
2. Follow
step
2
as
on
the LOCK
shown above
then press B.
(Rating).
change the password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the
1.
2.
Press SETUP to
the
display
as
are
played
to
the
same
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R) Registration" option
then press B.
registration code will appear.
Use the registration code to purchase
clear it
using
the
Setup
rent the
www.divx.com/vod. Follow the instructions and
a
disc for
playback
on
this unit.
menu.
Input
6-digit number "210499" and press
ENTER. The password is cleared.
or
VOD service at
download the video onto
the
played according
Audio CDs.
videos from DivX
can
are
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
menu.
you
Off.
We
forget your password
If you forget your password,
following steps:
or
DivX(R) Registration
menu
To
If you
to On
the PBC.
way
can
(PBC)
On: Video CDs with PBC
selection, then
Password
You
Control
3.
Press ENTER to exit.
Note:
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
this unit.
13
Operation
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
During playback,
Press X
SKIP
Discs
Operations
/
>)
tray.
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc, Video CD : 4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
press REPEAT
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
(AUDIO channel)
Press AUDIO
to hear
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
different audio channel
SLOW
14
Pause mode, press SLOW (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
a
Notes
general features:
on
If you press SKIP
(>)
Chapter (Track) playback,
Last Scene
once
the
during Repeat
repeat playback
This receiver memorizes last
that is viewed. The last
The A-B
on some
scene
scene
even if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
DVDs.
repeat function is available only in the
current title.
Note:
This receiver does not memorize the
Additional features
switch off the receiver before
Time Search
System
To start
at any chosen time
playing
on
Remote Control for
"--:--:--" appears.
select
during playback.
required
start time in
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
Playback
the
than 5 seconds to be able to
system does not coincide with
system of your TV, normal colour picture may
not be
NTSC:
displayed.
Select when DVD/CD Receiver is connected
with NTSC-TV.
starts from the
selected time.
more
system (PAL, NTSC).
a
When the selected
right.
Press ENTER to confirm.
4.
disc if you
the disc.
appropriate system mode for your
system. If NO DISC appears in the display
window, press and hold P./STEP on the front panel or
Press v / V to select the time clock icon and
the
a
play
TV
Press DISPLAY
Input
of
to
You must select the
the disc:
1.
seconds from left to
scene
commencing
Select
2.
3.
from the last disc
remains in memory
the disc from the receiver or
cancels.
Zoom may not work
Memory
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
Marker Search
To enter
You
Marker
a
start
can
To enter
points.
desired
point
the TV
screen
a
on
the disc. The Marker icon appears
to enter up to nine
Your Remote Control is
Receiver
on
To Recall
or
1.
During
disc
search
menu
Clear
a
seconds, press
b / B to select
scene.
playback
or
a
marker
clear.
starts from the
Or, Press CLEAR and the marker
You
on
can play any marker by
the marker search menu.
using
different
the Remote
Control, press the TV
inputting
2.
The POWER
the
Setting
its number
be
sure
on
Remote Control
Stop
appears when you leave the unit in
mode for about five minutes.
screen saver
a
used to
(+/-),
and
operate
LG TV.
Remote Control Codes for LG TV
Hold POWER
(TV)
and press CHANNEL(E/D) button
on or off.
until the TV
Note:
the other code
supplied
The
VOLUME
are
If the Remote Control does not
Screen Saver
(to operate
to press the TV first.
(TV), CHANNEL(E/D),
INPUT buttons
to select
operated.
device),
repeatedly
number is erased from the list.
4.
Before
operate for your LG TV.
To switch the Remote Control mode
press SEARCH. The marker
appears on the screen.
playback,
Press ENTER and
marked
capable of operating your DVD/CD
limited functions of LG TV.
as
the device to be
Marked Scene
number that you want to recall
3.
well
Follow the instructions below to
1.
Within 10
as
briefly. Repeat
markers.
2.
the TV
Controlling
from up to nine memorized
marker, press MARKER at the
playback
or use
operate your
the Remote Control
with the LG TV.
Due to the
variety
COMPANY cannot
(LG
particular TV, try
originally
and Gold
of codes used
Star)
by manufacturers,
guarantee that the
remote
OUR
control will
operate every model of LG TV.
15
Playing
This unit
an
Audio CD
play
can
Audio CDs
or
or
MP3/WMA file
MP3/WMA files
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
recorded media.
Once you insert
CD,
MP3/WMA files recorded media
an
a menu
the TV
on
or
1.
2.
0:00:00
0:00:00
Select
a
track
the
on
"List", then press PROG.
or
"
additional tracks
place
1/104
MP3
Program
disc.
(Add)" icon then press ENTER to place
the selected track on the "Program" list. Repeat to
1/12
List
a
select
functions. Refer to page 14.
Audio CD
Insert
contain 300 tracks.
Audio CD and MP3/WMA Discs:
screen.
appears
Press v / V to select a track/file then press PLAY or
ENTER and playback starts. You can use variable
playback
can
program
MP3/ WMA/ Audio CD
Audio
Programmed Playback
JPEG
on
the list.
Program
List
Track1
Music Folder 1
Track2
Music Folder 2
Note:
Track3
Music Folder 3
Track4
Music Folder 4
Track5
Music Folder 5
Track6
You
Music Folder 6
Track7
Music Folder 8
Tips:
Press MENU to
move
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
MP3 / WMA disc
on
top of the
compatibility
menu
is
with this
4.
?
highlighted.
player
follows:
5.
-
a
an
MP3/WMA file
".mp3"
CD-R
?
If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
format should be ISO 9660
1.
playback MP3 / WMA files.We recommend that you
Easy-CD Creator, which creates an ISO 9660 file
use
names
must
?
They
incorporate
should not
a
2.
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
list have
resume
normal
played
once.
playback
from
programmed
(or
list and then press PLAY.
Tracks
playing
a
disc. The
repeat
Press REPEAT to select
?
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
an
The total number of files
/ ?
"
*
:
on
the disc should be less than
Erasing
1.
This DVD/CD Receiver
requires
discs and
recordings
2.
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that
permission
is
required
in
a
Track from
"Program"
List
Use vVto select the track that you wish to
Program list.
erase
from the
999.
"
Press CLEAR.
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the
16
copyright
in
track of AUDIO CD
a
Press REPEAT when
?
<>letc.
?
To
?
should have
Playback begins
icon appears.
system.
File
ENTER to start.
Repeat Programmed
/ ".wma".
?
physical
or
playback,
MP3/WMA)
-
file extension other than
Press PLAY
select
-
The DVD/CD Receiver cannot read
icon
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
"Program"
is limited
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40
192kbps (WMA)
that has
?
( Add All)"
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
-
?
"
page.
to the next page.
On
?
add all tracks in the disc. Select
then press ENTER.
3.
as
can
Music Folder 7
Track8
owner.
Note:
The programs
are
also cleared when the disc is removed.
Viewing
a
JPEG file
JPEG
limited
This unit
Before
JPEG
1.
can play discs with JPEG files.
playing JPEG recordings, read the
Recordings on right.
JPEG disc
Insert
a
disc and close the
The PHOTO
menu
notes
on
?
is
Depending
upon the size and number of JPEG
a long time for the DVD/CD
Receiver to read the disc's contents. If you don't
display after several minutes,
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
PHOTO
as
Preview
List
player
see an on-screen
the TV
on
with this
files, it could take
tray.
appears
compatibility
follows:
as
---
2760
x
2048
pixels
and burn another disc.
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
The total number of files and folders
on
the disc
should be less than 999.
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
?
JPEG Folder 8
?
2.
Press v / V to select
folder, and press ENTER.
a
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder
previous
remote to
3.
list,
use
the v / V buttons
on
?
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Ensure that all the selected files have the
extensions when
the
and press ENTER.
highlight
Some discs may be incompatible due to a
different recording format or the condition of disc.
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
or
as
into the CD
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
shown
as
JPEG
image
files in
Explorer.
Tips:
There
>
four Slide
are
(Slow),
>>
Use v /V /b
to select the
If you set
:
Speed options
(Normal), >>> (Fast) and II (off).
/B to highlight the Speed. Then, use b / B
option you want to use then press ENTER.
Speed option
to
Off, Slide is
not active.
Slide Show
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER.
Still Picture
1.
Press PAUSE/STEP
Operation
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
Moving
press
again.
(.
or
>)
once
to advance to the next
To rotate
while
or
viewing a
previous file.
picture
Press b / B
picture
or
to another File
Press SKIP
picture
show, press PLAY
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
17
Playing
this DVD/CD Receiver you
Using
1.
DivX Movie file
a
Insert
a
appears
disc and close the
on
the TV
play
can
DivX disc
DivX disc.
tray. The MOVIE
menu
?
compatibility
?
player
is limited
Available resolution size of the DivX file is under
800x600
screen.
with this
follows:
as
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
MOVIE
by
45 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 4
Movie Folder 5
"
"
_
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the
screen
frame is
over
30
per 1 second, this unit may not operate
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
the remote to
on
normally.
?
and
highlight
If the video and audio structure of recorded
file is not
interleaved, either video
or
audio is
outputted.
press ENTER.
3.
If you want to view
v / V to
4.
highlight
particular file, press
file and press ENTER
a
a
Playable
or
PLAY.
".avi
displaying
If the subtitle does not
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
?
the Divx subtitle
display properly during playback,
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
displayed properly
Tips:
Press MENU to
move
Playable
to the next page.
?
On
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the
a
CD with
menu
is
"MP43
Playable
highlighted.
?
Notes:
Be
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Audio format
", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
-
sure
to select "SUBTITLE ON" mode
subtitle file every time before
When the subtile has
original
subtile is
only
more
playing
than two
The
microphone
You
can
not
does not work
adjust
the DivX file
by pressing
DivX file
a
the
.
languages
in the
can
not be
during playing
a
file,
played.
DivX file.
sound mode and VIRTUAL sound
playing.
?
-
-
available.
The DivX files in your memory card
during
Codec format
"DIVX3.xx
"AC3
18
DivX file
", ".mpg ", ".mpeg ", ".divx"
Press STOP to exit.
Notice for
is
?
DVD Audio Discs
DVD Audio is
success
disc format
building
provide high quality,
a new
of DVD to
Moving
multi-channel audio for
on
Some DVD Audio discs divide content into different
the
uncompressed,
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
a new
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
the disc itself.
DVD Audio
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
to another GROUP
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
used for
music, either Advanced Resolution multi-
quality that is closer to the artist's
recording or for longer recordings. Many DVD
on-screen
text, such
as
a
or
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
Note:
channel sound
Audio discs contain
Press 1/2
3.
on
Sometimes the author of the disc creates hidden
DVD Audio disc contains up to seven times
capacity of a CD. This additional space is
master
Group
can
the data
typical
during playback
artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
content that
can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
control isn't dictated by your DVD/CD Receiver
it is
---
a
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Note:
To
enjoy
of DVD
maximum sound
Audio, you
must
quality
use
output (5.1CH AUDIO OUT jacks
Receiver).
and surround effect
5.1 channel
on
analog
audio
the DVD/CD
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Operation
Note:
Since the
of the
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
some
on-screen
available
19
the Radio Stations
Presetting
You
can
Before
preset
50 stations for FM and AM
make
tuning,
sure
Listening
Preset radio stations in the DVD/CD Receiver's
(MW).
that you have turned down
the volume.
AM
(MW)
on
the Remote Control until FM
appears in the
or
display
Press and hold
about two seconds
until the
starts to
TUN.(-/+) for
frequency indication
Scanning stops
a
AM
(MW)
appears in the
on
the Remote
preset station you
want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
change,
when the DVD/CD Receiver tunes in
or
repeatedly
Control to select the
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
Remote Control repeatedly.
3.
station.
-
Press PROG/MEMO
A
the
window.
Press PRESET +/-
2.
then release.
4.
on
The last received station is tuned in.
BAND, FM and AM
(MW) changes alternately.
3.
radio stations"
(see "Presetting
Press BAND until FM
1.
window.
display
And then every time you press
2.
memory first
left).
Press BAND
1.
to the Radio
on
the Remote Control.
To turn off the radio
preset number will flash in the display window.
Press POWER to turn the DVD/CD Receiver off
Press PRESET +/-
5.
select the
on
preset number you
Press PROG/MEMO
6.
the Remote Control to
on
select another function mode
want.
the Remote Control
again.
7.
Repeat steps
To listen to
non-preset radio stations
Use manual
The station is stored.
or
For manual
3 to 6 to store other stations.
a
station with
Press
TUN.(-/+) repeatedly
station manually.
a
in
weak
step
signal
Press and hold PROG/MEMO for about two seconds
in the
again,
display
window
the stations
are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
change
to normal mode.
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
above.
20
the
2.
TUN.(-/+) repeatedly.
tuning,
preset radio station directly
the number buttons
press 1 then 9
preset number, follow the steps
a
5-6
as
on
the Remote
a
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
in the
on
seconds).
noisy
the front
display
panel
so
that "ST."
window. There will be
no
effect, but the reception will improve. Press
the button
Note:
already
step
preset radio station directly.
For example, to listen to preset station 4, press 4 on
the Remote Control. To listen to preset station 19,
To
If all stations have
a
can use
Control to select
To clear all the stored stations
appeared
in
3 to tune in the
To select
and then press PROG/MEMO
cleared.
press
tuning
press and hold TUN.(-/+) for
about two seconds on the front panel.
You
and "ERASE ALL" is
automatic
tuning,
For automatic
To tune in
or
(DVD/CD, AUX, USB).
again
to restore the stereo effect.
improve reception
Reorient the supplied antennas.
Timer
Sleep
You
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
can
at
automatically
specified
a
The SLEEP indicator and
display
sleep
XTS ON
window.
The
unique
XTS ON
When
playing the movie with the
relatively to the general music, it
Note:
check the time
can
remaining
before the DVD/CD
sense
Receiver turns off.
Press SLEEP. The
display window.
remaining
of sound at woofer for you to satisfy with.
BYPASS, It creates the high
display effect by playing the sound source
rear speakers same as the front speakers.
Dimmer
Press the DIMMER
to 2.1 CH.
repeatedly.
mute your unit in order, for example, to
the telephone, "MUTE" indicator flashes in the
window.
can
Connect a stereo headphone
PHONES connector.
Selecting input
can use
AV1/2 IN
VCRs
or
press VIRTUAL the
plug ( 3.5mm)
into the
when you
other units connected to the
repeatedly
input
on
select the desired
for
:
selecting
the
selecting
the TV audio
from AV1/2 AUDIO
signal
from SCART.
also select the
on
input source by pressing
panel.
the front
Press and hold down this button about 3
then press
repeatedly
to select
input
5.1 ch
VIRTUAL
Multichannel sound
seconds,
source.
a
5.1 ch feel 10.1
provides
a
emotion
can
Sound Mode
You
the
Note
can
Effect
3D STEREO
which you are involved with sound and you
feel detailed sound.
one
FUNC. button
Display
VIRTUAL
ch sound therefore this mode
& VIDEO IN Connectors.
TV-AUDIO: for
Source
2.1 ch.
The Multichannel sound makes
source.
analog signal
VIRTUAL sound.
Multichannel sound
the Remote Control to
Each time you press this button, the mode of the
function changes in the following sequence:
(L/R)
setting
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
source
or
Press AUX
You
it
3D STEREO
Optical connector. Refer to the Owner's
Manual supplied with the unit for further information
on the operation.
IN
changing
changing
VIRTUAL sound
Jack
speakers are automatically disabled
in headphones (not supplied).
AV1/2
disabled when
NORMAL
Using Headphone
You
temporarily
XTS-P and XTS mode tune off
Press MUTE to mute your unit.
plug
mode is
from 2.1 CH to 5.1 CH and it is enabled when
Mute
The
via the
Note:
The XTS
display
weak bass sound
enforces the
In the mode of 2 CH
time appears in the
This function will change the brightness of the display
window on the front panel during in power-on status.
answer
XTS-P ON...
creates the
SLEEP180→150→120→90→80→70→60→50→40→
You
→
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
30→20→10→OFF
You
NORMAL
→
XTS-P ON
Each time you press SLEEP the
changes in the following order.
2.
in
time.
time appears in the
sleep
setting changes
the
Press SLEEP to set the desired
1.
Each time you press XTS pro the
following order.
time.
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to. (2 ch. sound only)
can
of the
BYPASS
ON STAGE
STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
→
→
→
→
→
PL ll MUSIC
→
→
→
HALL
→
PL ll MTRX
→
BYPASS...
Note:
Initial sound mode is BYPASS
21
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
22
code from this list.
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
Insert
is
?
picture.
a
disc.
(Check
securely
into the
that the DVD or,
audio CD indicator in the DVD
does not work.
No
service.
The TV is not set to receive DVD
signal
?
Select the
mode
output.
display
lit.)
appropriate
the TV
on
so
video
the
input
picture from
the DVD/CD Receiver appears
TV screen.
?
The video cable is not connected
?
no
sound
or
The connected TV power is turned off.
?T
?
The
?
a
connected with the
equipment
not connected
are
?
is
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting
does not start
cable is
damaged.
dirty.
poor.
The DVD/CD Receiver
mode of the
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
?
input
so
jacks securely.
securely.
playback picture
Select the correct
you can hear the
sound from the DVD/CD Receiver.
signal output.
The audio cables
the TV.
urn on
audio receiver
audio cable is not set to receive DVD
?
The
Connect the video cable into the
?
very low-level
sound is heard.
only
the
urn on
equipment
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
is
?
An
the
jacks securely.
securely.
There is
on
unplayable
disc is inserted.
?
or
display
lit.)
Insert
disc
a
playable
disc.
the
(Check
type, colour system and Regional
code.)
?
?
The disc is
placed upside
The disc is not
placed
?
down.
Place the disc with the
within the
guide.
?
Place the disc
The disc is
?Amenu
is
?
dirty.
on
the TV
?
screen.
The
Rating
level is set.
?
heard.
or
noise is
?
The disc is
?
The
?
dirty.
speakers and components
poorly.
are
?
The DVD/CD Receiver is located too
close to the TV.
tray
guide.
menu screen.
Cancel the
rating
Rating
function
or
change
level.
Clean the disc.
Connect the
speakers
and
components securely.
connected
?
the disc
Press the SETUP button to turn off
the
Loud hum
side
Clean the disc.
the
?
on
inside the
correctly
?
playback
down.
?
Move your TV away from the audio
components.
23
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?T
?
une
in the station
Preset the stations
manually.
(page 20).
stations have been cleared
(when
tuning by scanning preset stations).
The Remote Control
?
properly.
The Remote Control is not
remote
does not work
?
sensor
pointed
at the
?
of the DVD/CD Receiver.
The Remote Control is too far from the
?
DVD/CD Receiver.
?
There is
an
Point the Remote Control at the remote
sensor
Use the Remote Control within about 23
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(7 m).
?
Remove the obstacle.
?
Replace
?
Press DIMMER
Remote Control and the DVD/CD
Receiver.
?
The batteries in the Remote Control
are
flat.
The front
display
24
panel
is too dim.
?
Nothing
display.
is
displayed
on
the front
panel
the batteries with
on
new ones.
the Remote Control.
Specifications
Power
Genral
Refer to main label
Net
3.9
kg
430
x
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
AM
[MW]
Amplifer
mm
5°C to
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL
35°C, Operation
625/50,
laser, wavelength
More than 75 dB
(1 kHz,
87.5
LPF/A-Filter)
108.0 MHz
-
or
65.0
-
74.0
MHz,
87.5
-
x
1
1
108.0 MHz
10.7 MHz
60 dB
140
522
(Mono)
8,000 Hz
-
1,620 kHz
-
or
520
-
1,720 kHz
450 kHz
Stereo mode
100W
Surround mode
Front: 100W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 100W
100W
+
(Rated Output Power 100W, 4Ω at 1 kHz, THD
100W (Rated Output Power 100W, THD
+
Surround*: 100W
10
10
%)
%)
(Rated Output Power 100W, 4Ω at 1 kHz, THD 10 %)
(Rated Output Power 150W, 3Ω at 30 Hz, THD 10 %)
AV IN, MIC (OPTIONAL)
S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V)
+
100W
Subwoofer*: 200W
Inputs
Outputs
Type
Impedance
Frequency Response
1
Center
Speaker
Way
1
120
Sound Pressure Level
-
Rated
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
Way
120
1
Speaker
-
(LHS-76SBW)
1
Way
(1m)
1
Speaker
3Ω
20,000 Hz
83 dB/W
100 W
to
Passive Subwoofer
4Ω
20,000 Hz
83 dB/W
speaker
(LHS-76SBC)
1
Speaker
4Ω
subject
20 kHz
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x 2
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1
output
are
dB,
1.0 V
output
specifications
NOP -6
0.5 %
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
and
nm
More than 70 dB
(LHS-76SBS)
Designs
650
NTSC 525/60
150 Hz to 18 kHz
Front/Rear
Speakrs
status: Horizontal
5% to 85%
COMPONENT VIDEO OUT
FM
295
x
Temperature:
S-video
Video
57
Operating
Operating humidity
Video
Tuner
Refer to main label
supply
consumption
Weight
Power
(1m)
100 W
40
-
1,500 Hz
82 dB/W
(1m)
200 W
200 W
200 W
400 W
117x210x111mm
300x115x110mm
240x450x390mm
0.65kg
0.78kg
10.5kg
change
without notice.
25
P/NO
:
3834RT0006G
Download PDF

advertising