ENGLISH
ENGLISH
User Guide
XB14 (XB14-F0U, XBS14V-K)
As an ENERGY STAR Partner, LG
has determined that this product
or product models meet the
ENERGY STAR guidelines for
energy efficiency.
®
®
ENERGY STAR is a U.S. registered mark.
®
P/NO: MFL62886103
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case
or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from over
heating. The openings shall be never be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product shall not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instruction has been adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an
authorized service center. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION : The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits. Check the specification page of this owner’s manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized serv ice center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
“This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible threat
to human and animal health, the old battery or the battery put it in the appropriate
container at designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free reimbursement
systems batteries and accumulators.”
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Welcome to your New DVD MICRO Hi-Fi SYSTEM
Contents
Setting up
Main unit
Remote control
OSD initial language settings - Optional
Initial settings of the Area Code
Adjusting the general settings
Displaying Disc information
Playing a Disc or file
Using an USB device
Listening to music from your portable player
Recording to USB
Listening to the radio
Language Codes
Area Codes
Troubleshooting
Types of Playable Discs
Specifications
4
5
6
7
7
8-9
9
10-11
12
12
13
14
15
15
16
17
18
3
Setting up
FM wire antenna
2 Connect the wires to the unit.
Match each wire’s coloured band to the same coloured
connection terminal on the reverse of the unit.
To connect the cable to the unit, press each plastic
finger pad to open the connection terminal. Insert the
wire and release the finger pad.
1 Video Out connection
4
Connect the VIDEO
OUTPUT(MONITOR) jack on the
unit to the corresponding input jack
on your TV using a Video cable.
2
1
3
Notes
• If TV screen becomes discolored do not place front
speakers within 30cm from TV.
• Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the
cords are reversed, the sound will be distorted and
will lack base.
3 Fit the AM loop aerial to
its stand (Optional)
Connect the AM loop aerial to the
unit. Then unfold and install the
aerial as below.
5
5 Plug the unit plug into a wall socket.
4
4 Stretch the FM aerial.
The reception will be at its best when the end of the
aerial is stretched to be in a straight line and horizontal.
Main unit
Screen Saver
The screen saver appears when you leave
the unit in Stop mode for about five minutes.
1/]
Power on/ off
FUNCTION
Change the functions between DVD/CD,
USB, PORTABLE, FM, AM (OPTIONAL).
VOLUME
Control the volume when using any
function
PROGRAM/MEMORY
• On the CD/USB mode, you can make
your own playlist.
• On FM/AM mode, you can save radio
stations.
OPEN
You can use it when inserting or
removing CDs.
DISPLAY WINDOW.
EQ.: Sound quality adjustment
You can choose sound impressions.
x Stop
BX
Play/Pause
m/M
Searches backward or forward
Skips to the previous/next track
TUN. (-)/ (+)
Selects the radio station
PRE. (-)/ (+)
Selects preset numbers
REC.
Recording to USB
PORT.IN
USB Connector
The player can be used to play the music
from many types of portable player.
5
Remote control
FUNCTION : Selects the function and input source.
SLEEP : You can select delay time between 10 and 180 minutes,
after the unit will turn off. To check the remaining time, press
SLEEP.
1 POWER : Switches the unit ON or OFF.
* : The button is not available.
TITLE : If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may not appear.
DISPLAY : Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu.
REPEAT/RANDOM : To select a play mode. (Random/ Repeat)
MUTE: Temporarily stop the sound.
EQ(Equalizer effect) : You can choose sound impressions.
CLEAR : Removes a track number on the program List.
VOL : Adjusts spaker volume.
TV Control buttons : Controls the TV. (LG TV only)
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH(+/–) button repeatedly until the TV
turns on or off.
RDS/PTY(Optional): Radio Data System
6
PRESET (U u) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
I i U u (left/ right/ up/ down): Navigates on-screen displays.
ENTER : Acknowledges menu selection.
RETURN (O) : Moves backwards in the menu or exited the setup
menu.
REC(z) : Recording to USB
STOP (x) : Stops playback or recording.
PLAY (B): Starts playback.
MO./ST. : Improves radio signal reception.
PAUSE/STEP (X) : Pauses playback.
SKIP (./ >) : Goes to next or previous chapter/ track/ file.
SCAN (bb/BB) : Searches backward or forward.
0-9 numerical buttons : Selects numbered options in a menu.
SUBTITLE :
During playback, you can select a desired subtitle language .
PROG./MEMO. :
Saves radio stations in FM/AM mode.
Creates your own playlist for playback
Put the batteries into the remote control.
Make sure that the + (plus) and - (minus) on the batteries
match those on the remote control.
Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
OSD initial language settings - Optional
During the first use of this unit, the initial language setup menu appears on your
TV screen. You must complete initial language selection before using the unit.
ON REMOTE
1 Turn the power on:
The language list appears.
1 POWER
When you use this unit for the first time, you have to set the Area Code as shown
below. Refer to page 15 for code list.
ON REMOTE
1 Display setup menu:
2 Select LOCK menu on the first level:
2 Select the language:
IiUu
3 Press:
ENTER
4 To confirm press:
Initial settings of the Area Code
Ii
ENTER
3 Move to second level:
The activated Area Code appears on the second
level.
SETUP
Uu
i
4 Move to the third level:
i
5 Enter a new password:
Numeric (0-9)
and
ENTER
6 Recheck the entered new password:
7 Select a code for a geographic area:
After select, Rating and Password will be
activated.
IiUu
8 To confirm what you press :
Make sure to finish setting the Area Code.
ENTER
7
Display Mode – If you selected 4:3, you’ll need to define how you would like wide
screen programs and films to be displayed on your TV screen.
Adjusting the general settings
[Letterbox]
ON REMOTE
1 Display setup menu:
2 Select a desired option on the first level:
3 Move to the second level:
4 Select a desired option on the second
level:
5 Move to the third level:
6 Change the setting:
SETUP
Uu
i
Uu
i
U u, ENTER
Adjusting the general settings - more you can do
[Panscan]
This displays a wide screen picture with black bands at the top and
bottom of the screen.
This fills the entire 4:3 screen, cropping the picture as necessary.
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not yet
entered a password you are prompted to do so.
Adjusting the language settings
1 Enter a 4-digit password then press ENTER.
2 Enter it again then press ENTER to verify. If you make a mistake while entering
number, press CLEAR then correct it.
OSD (Menu Language) – Select a language for the Setup menu and on-screen
display.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc
Subtitle/ Disc Menu.
Password – Sets or changes the password for lock settings.
[Original]
[Other]
[Off]
(for Disc Subtitle)
Refers to the original language in which the disc was recorded.
To select another language, press number buttons then
ENTER to enter the corresponding 4-digit number according
to the language code list in the reference chapter (Page 15). If
you make a mistake before pressing
ENTER, press CLEAR.
Turn off Subtitle.
Adjusting the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]
[16:9]
8
Select when a standard 4:3 TV is connected.
Select when a 16:9 wide TV is connected.
[New]
[Change]
Enter a new 4-digit password using the numerical buttons then
press ENTER. Enter the password again to confirm.
Enter the new password twice after entering the current password.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The
password has now been cleared.
Area Code – Select a code for a geographic area as the playback rating level. This
determines which area’s standards are used to rate DVDs controlled by the parental
lock. See the Area Codes on page 15.
Adjusting the others settings
DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX® VOD
service.
For more information, visit www.divx.com/vod.
Press ENTER and you can view the registration code of the unit.
Displaying Disc information
ON REMOTE
1 Press:
DISPLAY
Sytem select - OPTIONAL
2 Select an item:
Uu
You must select the approate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than five
seconds to be able to select a system. (NTSC/ AUTO/ PAL)
3 Adjust the display menu settings:
Ii
Enjoying a pre-programmed sound field
The system has a number of pre-set surround sound fields. You can select a desired
sound mode by using EQ. The displayed items for the Equalizer may be different
depending on sound sources and effects.
AUTO EQ
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
ROCK
POP
CLASSIC
This program lends an enthusiastic atmosphere to the sound,
giving you the feeling you are at an actual rock, pop, or classic
concert.
XDSS ON
Reinforce the treble, bass and surround sound effect.
NORMAL
You can enjoy the sound without equalizer effect.
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
4 To return the exit:
O RETURN
Displaying Disc Information - more you can do
You can select an item by pressing U u and change or select the setting by
pressing I i.
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/ total number of angles
Selected sound mode
Symbol Used in this Manual
All discs and file listed below
DVD and finalized DVD±R/RW
DivX files
JPEG files
ALL
DVD
DivX
MP3 files
WMA files
Audio CDs
MP3
WMA
ACD
JPG
9
Frame-by-Frame playback
Playing a Disc or file
DVD
DivX
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
ON REMOTE
1 Insert a disc on unit:
2 Select DVD/CD:
FUNCTION
UuIi
3 Adjust the menu settings:
/ Select a file from the menu:
Playing repeatedly or randomly
MP3
DVD
WMA
DivX
ACD
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will be
played back repeatedly or randomly.
To return to normal playback, press REPEAT/RANDOM repeatedly.
- Random play mode: only music files. - Random play mode : only music files.
Fast forward or fast reverse
4 Start the disc playing:
B PLAY or
ENTER
5 To stop the disc playing:
x STOP
Notes:
MP3
DVD
WMA
DivX
ACD
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeatedly.
Press PLAY (B) to continue play at normal speed.
1.5 times faster playback
DVD
Put a disc on the disc tray with the disc hole on it matched and press it until you hear
a click. If not, the disc cannot be read.
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5 times
faster than normal playback speed. “B x1.5” will appear in the screen. Press B
PLAY again to return to normal playback speed.
Playing a Disc or file - more you can do
Slowing down the playing speed
Playing a DVD that has a menu
DVD
Most DVDs now have menus which load first before the film begins to play.
1 You can navigate these menus using U u I i to highlight an option.
2 Press ENTER to select.
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play by
pressing MENU.
Skipping to the next/ previous chapter/ track/ file
MP3
DVD
WMA
DivX
ACD
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
Pausing playback
ALL
1 Press PAUSE/STEP (X) to pause playback.
2 Press PLAY (B) to continue playback.
10
DVD
1 While playback is paused, press m/M on the remote control.
2 You can change the various playback speed by pressing m/M repeatedly.
3 Press Brto continue play at normal speed.
Selecting a subtitle language
DVD
DivX
During playback, press SUBTITLE repeatedly to select a desired subtitle language.
Changing the character set to display DivX® subtitle correctly
- Optional DivX
1 If the subtitle does not display properly during playback, press and hold
SUBTITLE for about 3 seconds to display the language code menu.
2 Press SUBTITLE repeatedly to change the language code until the subtitle is
displayed properly.
Viewing the Title menu
DVD
Press TITLE to display the disc's title menu, if available.
Starting play from selected time
DVD
DivX
Searches for the starting point of entered time code.
1 Press DISPLAY then select clock icon.
2 Enter a time then press ENTER.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020”
by using numerical buttons and press ENTER. if you enter the wrong number, press
CLEAR to enter again.
Last Scene Memory
DVD
This unit memorizes the last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the unit or switch off (Stand-by
mode) the unit. If you load a disc that has the scene memorized, the scene is
automatically recalled.
Creating your own program
MP3
WMA
ACD
You can play the contents of a disc in the order you want by arranging the order of
the musics on the disc. The program is cleared when the disc is removed.
“ and then press
1 Select a desired music then press PROG./MEMO. or select “
ENTER to add the music to the program list.
2 To add all music in the disc, select “
” and then press ENTER.
3 Select a music from the program list then press ENTER to start programmed
playback.
4 To clear a music from the program list, select the music you want to clear then
press CLEAR or select “
” icon and then press ENTER.
To clear all music from the program list, select “
” then press ENTER.
Displaying file information
MP3
You can check the ID3 Tag information of MP3 files only in discs by pressing
DISPLAY repeatedly.
Viewing photo files as a slide show
JPG
Playable file requirement
DivX
• Available resolution: within 800x600 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as “ _ “
mark on the display.
• If the video and audio structure of recorded files is not interleaved, either video or
audio is outputted.
• Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha (*.ssa/
*.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt).
• Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX”.
• Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
• For discs formatted in Live file system, you cannot play it on the player.
• If the name of movie file is different from that of the subtitle file, during playback of
a DivX file, subtitle may not be displayed.
MP3/ WMA
• Sampling frequency : within 32 - 48 kHz (MP3/ WMA)
• Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA)
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO 9660 LEVEL 1 / JOLIET
• We recommend that you use Easy-CD Creator, which creates an ISO 9660 file
system.
JPG
•
•
•
•
Normal: 5120 x 3840, Progressive jpeg: 2043 x 1536
Recording condition: ISO9660 LEVEL 1/ JOLIET
Maximum files : Under 999.
Some discs may not operate due to a different recording format or the condition of
disc.
• File extensions: “.jpg”
1 Use U u I i to highlight (
) icon then press ENTER to start slide Show.
2 You can change slide show speed using I i when (
) icon is highlighted.
Skipping to the next/ previous photo
JPG
Press SKIP (. or >) or I i to view the previous/ next photo.
Rotating a photo
JPG
Use U u to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
11
Using an USB device
You can enjoy media files saved on an USB device by connecting it to the USB
port of the unit. If you want to operate other function, see the DISC playback
section.
ON REMOTE
1 Connect the USB device to the USB port of the unit.
2 Select the function:
3 Select a file you want to play:
4 Start your media playing:
FUNCTION
Uu
Listening to music from
your portable player
ON REMOTE
1. Connect the portable player to the PORTABLE
IN connector of the unit.
PORT IN.
B PLAY or
ENTER
5 To stop, press:
6 Before disconnecting, you have to change to
any other function:
x STOP
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that supports USB 2.0 or USB 1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
• Devices which require additional program installation when you have connected
it to a computer, are not supported.
Look out for the following.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Card readers, Locked devices, or hard type USB devices are not
supported.
• USB port of the unit cannot be connected to PC.
• The unit can not be used as a storage device.
12
2. Turn the power on.
3 Select the PORTABEL function.
4 Turn on the portable player and start it playing
POWER
FUNCTION
-
When you are recording, look out for the following
Recording to USB
ON REMOTE
1 Connect the USB device to the USB port of the
unit.
2 Select a mode in which you want to record:
(ex. CD/ TUNER/ ...)
Play a sound source first
If you want to record desired music file in disc to
USB, play a file before starting the recording.
FUNCTION
3 Start the recording:
z REC
4 To stop, press:
x STOP
Recording to USB - more you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the z REC is pressed at the CD stop, all tracks/ files would be recording.
The files in the sub-folders are not recorded during all track recording.
Program list recording
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
• You can check the recording percentage rate for the USB record on the screen
during the recording.
• During recording MP3/ WMA, there is no sound.
• When you stop recording, the file that has been recorded at that time will be stored.
(AUDIO CD Only)
• Do not remove the USB device during USB recording. If not, an incomplete file may
be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”, “USB
FULL” or “NO REC” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB recording.
• A file is recorded by 2 hours (about 128 Mbytes) when you record for a long term.
• In the state CD-G disc, USB record is not operated.
• You may not record more than 999 files.
• The file number is saved automatically.
• It’ll be stored as follows.
AUDIO CD
CD_REC
TRK-001
TRK-002
-
MP3/ WMA
FILE_REC
001_ABC(File name)
002_DEF(File name)
-
The other sources.
EXT_REC
AUD-001
AUD-002
-
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights
13
Listening to the radio
Make sure both for the FM and AM(Optional) aerials to be stretched to
the most.
1 Select FM or AM(Optional):
ON UNIT
ON REMOTE
FUNCTION
FUNCTION
m/M
TUN. - / +
3 To save a radio station:
A preset number will show in the
display.
PROGRAM/
MEMORY
PROG./MEMO.
4 Select the preset number:
Up to 50 radio stations can be
saved.
PRE. (-) / (+)
PRESET U / u
5 To confirm press:
PROGRAM/
MEMORY
PROG./MEMO.
2 Select a radio station:
Listening to the radio - more you can do
Looking for radio stations automatically
Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROG./MEMO. for two seconds.
- “ERASE ALL” will flash up on the display.
2 Press PROG./MEMO..
Improving poor FM reception
Press B MO./ST. on the remote control. This will change the tuner from stereo to
mono and usually improve the reception.
14
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
15
Troubleshooting
PROBLEM
CAUSE
CORRECTION
No Power
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
No Picture
The TV is not set to receive the DVD signal.
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
The video cables are not connected securely.
Connect the video cables securely to both the TV and unit.
A DVD/CD will not play.
No disc is inserted.
Insert a disc.
An unplayable disc is inserted.
Insert a playable disc (check the disc type, colour system
and regional code).
The disc is inserted upside down.
Place the disc the side you can see the printed side.
The setup menu is open on screen.
Press SETUP to close the menu screen.
There is a parental lock which prevents the playback of Enter your password or change the rating level.
DVDs with a certain rating.
Humming noise heard while a
DVD or CD is playing.
The disc is dirty.
Clean the disc using a soft cloth with outward strokes.
The unit is located too close to the TV, causing
feedback.
Move the unit and audio components further away from your
TV.
Radio stations can’t be tuned
in properly.
The antenna is positioned poorly.
Attach an external aerial if necessary.
The signal strength of the radio station is too weak.
Tune to the station manually.
No stations have been preset or preset stations
have been cleared (when tuning by scanning preset
channels).
Preset some radio stations.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote control doesn’t
work well / at all
16
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the unit.
There is an obstacle in the path between the remote
control and the unit.
Remove the obstacle.
The batteries in the remote control is flat.
Replace the batteries with new one.
About the “ ” Symbol Display
Types of Playable Discs
Type
“ ” may appear on your TV display during operation and indicates that the function
explained in this owner’s manual is not available on that specific DVD video disc.
LOGO
DVD-VIDEO : Discs such as movies that can be
purchased or rented.
DVD-R : Video mode and finalized only
DVD-RW : Video mode and finalized only
DVD VR format that have been finalized can not
be played in this unit.
DVD+R : Video mode only
Supports the double layer disc also
DVD+RW : Video mode only
Audio CD : Music CDs or CD-R/ CD-RW in music
CD format that can be purchased.
This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles,
DivX, MP3, WMA and JPEG files. Some DVD±RW/ DVD±R or CDRW/ CD-R cannot be played on this unit due to the recording quality
or physical condition of the disc, or the characteristics of the recording
device and authoring software.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Manufactured under license from Dolby Laboratories.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play only
DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible on the
cover. This number must match your unit’s regional code or the disc cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public,
or rent copyrighted material without permission. This product features the copy
protection function developed by Macrovision. Copy protection signals are recorded
on some discs. When recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION
SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting the
option to Live File System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system for Windows Vista)
17
Specifications
General
Power supply
Refer to main label
Power consumption
Net Weight
External dimensions (WxHxD)
Bus power supply (USB)
Operating temperature
Operating humity
Output power
T.H.D
Tuner
FM Tuning Range
AM Tuning Range(Optional)
DVD/CD
Frequency response
Signal-to-noise ratio
Dynamic range
Refer to main label
1.68 kg
150 x 205 x 212 mm
DC 5 V
500 mA
5 °C - 35 °C
5% - 85%
5W+5W
0.5 %
87.5 - 108.0 MHz or 87.50 - 108.00 MHz
522-1620kHz or 520-1710kHz
100 Hz - 18 kHz
60 dB
55 dB
Speaker (XBS14V-K)
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
1 Way 1 Speaker
6Ω
5W
10 W
130 x 205 x 156 mm
0.9 kg
Designs and specifications are subject to change without prior
notice.
18
Download PDF

advertising