LG | V-CB141HEU | LG V-CB141HEU Owner’s Manual

M
K
MODEL V-CB141HEU
LG
Vacuum Cleaner
User's Manual
This manual
provides a correct and safe method of
use for you, please read it before using the product.
Before purchasing, please make sure that the
ihdate of purchase and name of companyl has been
printed on the Certificate.
The Certificate is attached.
M
3828Fi3848E
K
In order to
obey
The
cyclonic
the
vacuum
If the
please
following guidelines:
cleaner
dust without the need of
The dust in
prevent weakening
of suction,
applies the principle
dust-collecting paper.
of
centrifugal
force to collect dust
dust-collecting cup must be cleaned away when it reaches the maximum
indicating light of "clean filter" is lit, or dust has exceeded the maximum level, the
a
by separating
air and
level.
filter will be blocked and
suc-
tion will weaken.
Light
lit
Do not suck up
large garbage.
Large garbage such as plastics, candy packs and toilet paper etc., it will stick inside the dust collecting cup and
cause blockage, or attach to the filter and block it.
Do not clean excessive garbage at once.
If excessive garbage gets sucked up, the filter will be blocked. Clean separately when there is a lot of garbage to be
disposed.
Do not put fine particles together for disposal.
Fine particles such as flour, gypsum powder and chalk etc. will block the filter when sucked inside and activate the
protection device due to weak suction.
Thin and long garbage
Long threads or hair will coil around the filter of the dust-collecting cup or block it and weaken the suction. Please
wash and clean the filter first when this happens.
When the suction is weakened
Symptom:
If the suction becomes
very weak:
Handle of
reason
very loud.
The "clean filter"
1
.
there is
for
object
weak suction?
Check if the
a
foreign
in the filter
and parts of the
dust-collecting
is off.
Please do the
cleaner:
Please check if
What is the
Rotation becomes
light
vacuum
cup.
following:
dust-collecting cup
is full and clean away the dust.
If it still is not
improved, please
check the filter
2. Check if the filter is blocked.
the
on
dust-collecting
cup.
Now
use a
soft brush to wash
Check
and clean the filter.
er)
Method of
washing
and
cleaning
the filter
2
3828Fi3848E
pg. 10
if
(on the pipe and suckany foreign object is
inside.
r
pg. 1 5
INDEX
Before
use
Information for your
Method of
safety ......................................4
cleaning
Name of each part and method of connection ......5
Method of
using adjusting
Method of
using
button
on
handle ..........5
sucker at dead corner..................6
Garbage disposal .................................................6-7
Method of
using
the bend
pipe ...............................8
Method of maintenance and
storage
Method of
washing
the
germproof dust-collecting
cup and filter ............................................................9
Method of
washing
the filter for motor
protection
......9
Method of
using
the rotatable brush.....................10
Method of
using
the sucker
specifically
for bed sets ......................................................11-12
Correct method of
When
keeping
.................................1 3
confronting
a
situation
like this
When
confronting
a
situation of similar
malfunction ................................................14-15
Specification
...................................................16
3
3828Fi3848E
Please read all the
following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
Never allow children to
Do not
the
use
appliance
If the mains lead is
the
use
appliance unsupervised.
If the mains lead is
it must be
damaged,
damaged
replaced by
or
an
faulty.
approved LG
Electronics Service
to avoid a hazard.
Agent
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
?
?
Do not
vacuum
flammable
Do not
vacuum
hot ash, embers etc.
Do not
vacuum
water or other
When you
vacuum
with
Do not reach into the
Important
for
explosive substances(liquids
or
an
nor
or
gases).
sharp objects.
liquids.
attachment
appliance
that has
a
brush roller:
rotating
brush roller.
running
users
The wires in the mains lead of this
appliance
are
coloured in accordance with the
following
code:
BROWN
BLUE-neutral
-
live
VERY IMPORTANT:
Neither wire is to be connected to the earth terminal of
13 amp BS 1362 fuse.
If any other type of plug is used,
fit
a
3
pin plug.
If
a
13 amp
plug
is fitted,
a
For
appliance
porates
For
a
which include
15 amp fuse at the distribution board.
mains lead with a moulded-on plug, the moulded-on plug incor-
a
protect with
a
fuse.
replacement
use a
13 amp BS 1362 fuse.
Only ASTA approved
or
certified fuses should
be used.
The fuse cover/carrier must be
replaced
in the event of
changing
the fuse. The
plug
must not
be used if the fuse cover/carrier is lost.
A
replacement
cover
carrier must be obtained from authorized electrical
4
3828Fi3848E
goods
retailers.
Handle
Adjusting
Ionic
button
on
handle
Connecting button
extension pipe
Bend pipe
Adjusting
button for
"Clean filter"
Hose
light
light
on
Ionic outlet
length
Extension
for
pipe
length adjustment
Power
plug
(specifically for
AC 230V)
Button for
Release button for
brush connection
dust
collecting
cup
Cable
Refer to
rolling
button
"sucker for
bed sets"
on
page 12~13
for use of
cleaning
Handle for
moving
the
bed sets.
Hook for
extension
Ionic rotating
sucker
pipe
Please press the button
for pipe connection upon
Germproof
dust-collecting cup
connecting the pipe onto
the body of the machine.
Entrance for
pipe
insertion
P
a
rts
Ionic
rotating
sucker
Sucker for
bed sets
Adjust the magnitude of suction
Maximum
Hose
Adjustable
extension
Bend
pipe
in accordance with the
pipe
Brush
Sucker for
dead
Filter for motor
corner
expected
level of
protection(backup)
cleaning.
Power control
Floor
Carpet
Sofa
Curtain
Minimum
5
3828Fi3848E
Sucker used
This
can
alternate with
specifically
rotating
brush
depending
Sucker used
Used at dead
Please switch to iomediumlY
or
Do not
Attention
Method of
dead
corner
cleaning requirement.
on
dead
corner
of window frame, furniture and gaps.
using
irweaklm with the
on
specifically
corners
When
on
the sucker for dead
adjustment
button
on
corner
the handle.
specifically for dead corners over long hours.
If it is excessively used for long hours, load may increase on body of
and cause malfunction easily.
use
the sucker
machine
garbage disposal
If the red
light is lit or the dust-collecting cup has reached the "MAX" line, please dump
away garbage in the cup (if the garbage is not dumped away and use of the machine is continued, protection device for motor will activate and the vacuum cleaner will stop automatically. When this happens, please dump away garbage in the dust-collecting cup and re-activate the machine after 2 hours.).
Light
lit
6
3828Fi3848E
Method of
garbage disposal
Dust-collecting cup
Release button for
dust-collecting cup
Push the release button for
from the
dust-collecting cup forward,
and then lift the cup
upwards
to remove it
body of the machine.
Upon inserting
the
with force and it
If the red
light
dust-collecting cup, grab the hook firmly and press the dust-collecting cup
will be secured in place when your hear the ihclickll sound.
is still lit after
cleaning
away the
garbage,
down
the filter needs to be washed.
Attention
Do not
the
grab the dust-collecting cup while moving
machine (the vacuum cleaner will fall off).
7
3828Fi3848E
Method of
The bend
pipe
can
using
be used when
the bend
cleaning places
pipe
like bed, sofa, tables and chairs.
Features
such
as
bed, sofa, tables and chairs
With suitable
adjustment
on
bending
The
of bend
Cleaning
for
bending
places
Method of
1.
Assembly
pipe
pipe,
is flexible for easy
use
and
of the
can
multi-use
operation
can
with
Please refer to the
be
easily
done without
one
hand.
diagram.
dismantling
Dismantling:
After insertion between the extension
Please press the handle
button and pull towards
and handle, lock
direction indicated for
secure
2.
tightly
per
the
fixture.
for
Applicable
The bend
pipe
can
be extended for
There is
the
will extend
pipe
no
need to
opposite direction
dismantling.
use
Use of
bending:
Pull the bend pipe
bending.
use:
Pull away the handle for bend pipe per indicated
direction; gently lift the pipe handle upwards and
the bend
over.
be made.
Assembly:
pipe
bending
pull
towards the indicated direction for
automatically.
back
lift up
the handle and the
pipe, simply
bend
pipe
will be
back to its
original
state.
Attention
3. Effective method of
It
can
pillow
The bend
Do not put your hand or fingers near the joint to prevent
Please be careful when doing this procedure.
injury.
use
also be used
or
dead
on
sucker for duvet,
corner.
freely and makes it very convenient to clean.
Bad suction indicates that the dust-collecting paper is full.
If there is any garbage stuck at the entrance of suction, pipe or bend pipe etc., please apply adequate
by referring to the "When you think it is faulty" section on page 15~16.
pipe
can
bend
8
3828Fi3848E
action
Method of washing the germproof dust-collecting cup and filter
When the red
light is lit due to entry of foreign object or full dust-collecting cup, please
the dust-collecting cup.
Wash the filter of the dust-collecting cup as well after cleaning the dust-collecting cup.
Please
motor
remove
filter for
Please
remove
the filter
membrane.
protection.
clean away dust after
Wash the
checking
dust-collecting
cup
with clear water after cleaning it.
If the
dust-collecting cup sucks up a screw or toy for kids, the sound while operating will become louder.
When the dust-collecting cup sucks up a pile of toilet paper, shoes, stockings or large paper, clean them
away first and then
re-use
Method of
the machine.
the fil-
removing
Please
use a
soft brush
Method of
assembling
(1) aim the
ter membrane: As indicat-
and clear water to wash
the filter:
ed below, take it out by
rotating in an anti-clock-
the filter membrane.
handle of the filter
wise direction.
a
clockwise
(Rotating
direction.)
(Use after drying
place.)
in
in
a
cool
membrane at the end
of the
Hang
triangle.
up
Rotate
Handle
Malfunction to motor will
putting on the dust-collecting cup filter. Please ensure that the
machine is used after securing the filter for the dust-collecting cup. (If the filter gets washed regularly, suction will be good and
lifetime for the vacuum cleaner can be extended. The washing period for the filter is: wash the filter once every 5 times the dustcollecting cup is cleaned.)
occur
when machine is used without
Method of
Method of
the filter for motor
washing
protection
dismantling
Handle
Dismantling
Use the handle to dismantle
as
indicated.
During assembly
Location of
placement
Aim the handle at the location of
Malfunction to motor will
placement
Insert
and then insert.
protection. Please ensure that the machine is
used after securing the filter for motor protection. (If the filter gets washed regularly, suction will be good and the lifetime for the vacuum
cleaner can be extended. The washing period for the filter is: wash the filter once every 5 times the dust-collecting cup is cleaned.)
occur
when machine is used without
putting
on
the filter for motor
9
3828Fi3848E
Method of
This is the sucker for normal
the rotatable brush
using
use.
Features
The sucker rotates
and is able to clean dust in gaps, dead
and
anyplace.
With the rotation of the brush, dust at dead corners can be cleaned away clearly.
Convenient dismantling and assembly that allows easy removal of long-time dirt on the rotatable
Method of
Please
use
corners
It is very convenient to
per the following method:
clean with the 180°
rotation of sucker.
use
Assembly
Pulling
sucker.
use
1. Method of
2.
freely
Smaller side of
rod
rotating
Larger side of
rotating brush
brush
Larger
hole
Smaller hole
Push the
pulling
and
side of the
right
rod
sucker outside and
the left
on
Take out the brush in the
rotating
sucker and
clean away the long-time accumulated dust
the brush-type sucker.
rotating
pull out the
During assembly, just put
cover.
the
on
part back in
sequence; since the size of the brush
the left and right side is different; please note
the size and location
Things
The ionic
negative
about the ionic
rotating
ions via
formed into
brush
on
rotating
the ionic
rotating
friction, which neutralizes the dust
positive
ion and falls off
Wash the
rotating
water and
use
the
rotating sucker,
sucker is also
used to clean away the dust
accumulated.
Ionic
rotating
brush
produces
trans-
Friction
easily.
sucker with clear
after
on
during assembly.
sucker
sucker
base of the
brush-type
reverse
on
For the maintenance
complete drying
under the
disc
After
removing the rotating brush from bottom, stop operating
for quietness (sometimes it rotates slowly).
sunlight; malfunction will
occur due to rough rotation if the sucker is not dried properly.
rotating brush will not rotate depending on the
type of brush, please switch the suction to ultra-strong level to
Do not
use
If thinner
Do not
wipe
Do not
dry
detergent,
with
a
bleach etc..
powerful
with hair
dryers,
brush.
Sometimes the
solve this.
carpet gets sucked inside, it will attach on the sucker
and hence be difficult to clean; thus press one end of the carpet
down for
heater etc.
10
3828Fi3848E
it
The
ease
rotating
of
cleaning.
brush is
capable to
rotate
on
the floor
or
carpet.
Sucker
This is the sucker
for bed sets
specifically
specifically
for
It is
particularly effective for dust
Please use "Strong" suction.
cleaning
on
bed sets
(duvet,
bed
etc.).
duvet.
Features
The dust inside
be sucked out
by patting.
The bottom of the sucker can be opened and washed.
No sticking will occur inside of the sucker and makes cleaning
Method of
With the
use
1. Method of
Placed
can
following method,
machine will become
of the
convenient.
use
the hook of pipe.
on
more
use
convenient.
Placed
on
the extension
pipe.
2. Confirmation
Please
Strong
(Bed sets)
3. Effective method of
adjust the suction
to the
specific
mode
for bed sets.
cleaning
Bed, bed sheet
Thin
Thick duvet
duvet, bed/sheet
If the thin duvet
The duvet can be laid on
the bed and clean away
dust in a back and forth
For cleaning on thin duvet &
bed sheet, please press down
direction.
on one
side
so
it
can
needs to be
cleaned, it can be
laidontopofa
be done
conveniently.
thick duvet for
convenient
cleaning.
When
When there is
no
using
on
the bed
When
using
vibration, put the sucker slightly off the ground; if there is still
whether the suction is
adjusted
to ioWeakld
or
foreign objects entering
onto the
no
on
the floor
vibration, please check
vibrating plate,
and make ade-
quate action after confirmation.
Sometimes there will be
according
to bed sets.
When the
dust-collecting
and then
no
vibration
cup is full
depending
or
its filter
on
different
types of carpet and the
use on
it; please
use
gets blocked, vibration will decrease; please wash the filter first
re-use.
11
3828Fi3848E
Method of
Method of
using
cleaning
The sucker must be washed
sucker
sucker
specifically
specifically
and the sucker for dead
simply,
for bed sets
for bed sets
corner can
be used to clean away accumulated dust.
Bottom
Top
Please wash per the following sequence.
(malfunction to vibrator will occur if washing the sucker with
Please press the button
behind the sucker and let
the bottom
plate
Wipe
water.)
all dirt
away with
a
on
the sucker
Wash the bottom
cloth.
came
off.
Insert the bottom
extruding part
plate
into the hole via
dry.
plate
Press from top and
tion.
for connection.
that
off with clean water
and leave it
Bottom
plate
use
after installa-
Bottom
Vibrating plate
Attention! The internal vibrator is made with very delicate
Dismantling vibrating plate
Please
no
ensure
that the bottom
vibration without the
This is
(Do
will decrease the
a vacuum
plate is
bottom plate.
function; do
installed
not dismantle and open it up.
not bend or dismantle.
and then start to use; sometimes there will be
for bed sets, please use it on them.
this will cause dirt and decrease the functions.)
designed specifically
not use it on a normal floor as
properly
parts; do
12
3828Fi3848E
Correct method of
Press "retrieve cable" button after
out the
plug
keeping
Hold after
pressing the ihAdjustment
button for lengthlt and grab the pipe clip
for adjustment to a suitable length.
pulling
and retrieve cable.
Press
"Retrieve cable"
button
Adjustment button
for length
If the cable cannot be retrieved
fully, hold
after pressing the button and pull the cable
straight a little, and then operate again.
Please put the hook for extension
pipe
at a
place
Hook for extension
below the
body
of the machine.
pipe
Storing place
for hook of
extension
If
one
pipe
intends to
hang
the hook for extension
body of the machine, please
and insert
rotate the ionic
pipe on the
rotating sucker
indicated in the
diagram.
Put the machine in standing position and place it in a adequate place for safekeeping.
In order to prevent any defects at the bottom, please place
the machine vertically after taking care of the end of the
rotating sucker.
Leave the powercord about 10cm in case of standing position
as
13
3828Fi3848E
When you think that there is
When there is malfunction to the
Symptom:
product, please
check the
a
malfunction
situation before
following
contacting
Handle of
If suction becomes weak:
the LG Service Station.
vacuum
cleaner:
Please check if
What is the
reason
there is
of weak suction?
object
Rotation becomes very loud.
The "clean filter"
light
a
foreign
in the filter
and parts of the
dust-collecting
is off.
Please do the
following:
1. Check if the
dust-collecting cup
is full and clean away the dust first.
cup.
If it still does not
improve, please
check the filter
on
the dust-collect-
ing
2. Check if the filter is blocked.
Now
use a
Method of
Things not getting better after
cleaning dust on the filter?
Check if any foreign object is
soft brush to wash and clean the filter.
washing
and
cleaning
the filte
cup.
pg. 9
on
the machine
part.
3. How to check for
foreign objects on machine parts
(pipe, sucker etc.):
Adjust the vacuum cleaner to "Strong"
Step
1
Step 2
Please re-start the
machine after
taking
Please
remove
foreign objects.
Please re-start the machine
off
after taking off the
the extension
pipe
and extension
foreign objects
ening the length.
after short-
and sucker.
Is there is still
Step 3
Is there still is
no
improvement?
Please try Step
The
pipe
pipe.
Remove
no
improvement?
Please try Step
2.
3.
Please switch the suction to
"Ultra-strong";
foreign object
appears to be inside the
block the
pipe
with
your hand and release; repeat
this several times.
pipe.
Is there still
no
improvement?
Please wash the filter
on the dust-collecting
cup.
4. Filter
on
blocked
the
dust-collecting cup
or
for motor
protection
are
both
small and fine dust; wash them out with clear water and
leave the filters to dry out.
Please
by
use
after
drying
out for
one
day
in
a
cool
place.
14
3828Fi3848E
Is there still
no
improvement?
Please contact the
LG Service Station.
When you think that there is
When the
product
is
vacuum
malfunction
abnormal, please check the following situation before contacting the Service Station.
Abnormality
The
a
Action taken
Checking
cleaner is not
Was the
plug completely
inserted
Please
re-plug into the socket completely
(this product only uses 230V).
Plug other product into the socket and see
into the socket?
starting.
Is there power in the socket for
sure?
Was the
body
pipe fully
power.
inserted into the
Pull out the
of the machine?
Was the
protection
if there is
insert
device for the
pipe
again.
from the
of the machine and
body
Re-start after 2 hours and
see
what
happens.
motor activated?
Cannot retrieve the cable
Cannot
pull
out the cable
fully.
fully.
Pull the cable outwards and
straight,
and then retrieve
again.
Pull the cable out with force because the cable may coil up inside.
Especially when temperature drops in winter, the cable
pull out, re-start the machine and then the cable will be
Hot wind blows out
on
body
or
overheats
of machine.
The exhaust also has the function of
(suction)?
motor; hence the emission of
strange smell
a
back of the
vacuum
at the
cleaner.
You would smell
plastic
while,
cleaner
The
during operation.
bad smell will
a
vacuum
use
normal, please
strange sound in the
cleaner.
vacuum
a
The filter for
and filter for
come
out; thus the
purchase,
which will
under such
disappear
use
then.
after 1-3
dust-collecting
a
noise
it since this is not
a
during operation
a
protec-
when the suction is
strong, please feel
operation
is not
contact the LG Service Center.
dust-collecting cup
motor protection are
Please
remove
The sucker is blocked.
Use after
The extension
Use after
is blocked.
pipe
is blocked.
dust
on
wash with clear water;
day.
pipe
cup, filter and filter for motor
malfunction. However, if the sound of
blocked.
The
not washed for
regularly.
cleaner will make
comfortable to
Suction is weak and there is
new
occur
gets sucked inside accidentally and the dust-collecting cup is
tion must be washed
vacuum
malfunction will
warm
cooling the
air during normal
months.
If moisture
Noise from
around the motor after
no
or
easy to work with.
Is it normal with the activation
use,
There is
will become hard and not be easy to roll
Use after
the filter with
use
after
drying
removing foreign objects
removing foreign objects
removing foreign objects
soft brush and
a
out for
one
on
sucker.
on
extension
on
pipe.
pipe.
15
3828Fi3848E
211mm
282mm
Capacity
Length of
Net
310mm
of dust collection: 0.8 ltr.
cable: 5
weight:
3.5
Size: Width 282
m
kg
x
16
3828Fi3848E
Length
310
x
Height
211mm
17
3828Fi3848E
18
3828Fi3848E
19
3828Fi3848E
M
K
P/No.
:
3828Fi3848E
M
3828Fi3848E
K
Download PDF

advertising