BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 1
ENGLISH
BD390
As an ENERGY STAR® Partner, LG
has determined that this product
or product models meet the
ENERGY STAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
P/No. : MFL62344742
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSO NNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from over heating.
The openings shall be never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product shall not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. Shall the unit require maintenance, contact an
authorized service centre. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized service centre. Protect the power cord from
physical or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the appliance. To disconnect power from the mains,
pull out the mains cord plug. When installing the product, ensure that the plug is
easily accessible.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 3
Notes on Copyrights
Because AACS (Advanced Access Content System) is approved as content
protection system for BD format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are imposed on playback,
analogue signal output, etc., of AACS protected contents. The operation of
this product and restrictions on this product may vary depending on your time
of purchase as those restrictions may be adopted and/or changed by AACS
after the production of this product.
Furthermore, BD-ROM Mark and BD+ are additionally used as content
protection systems for BD format, which imposes certain restrictions including
playback restrictions for BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BD-ROM Mark, BD+, or this
product, please contact an authorized Customer Service Centre.
Many BD-ROM/DVD discs are encoded with copy protection. Because of
this, you should only connect your player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture from copy-protected discs.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright laws of other countries,
unauthorized recording, use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may
subject you to civil and/or criminal liability.
What is SIMPLINK?
Some functions of this unit are controlled by the TV’s remote control when this
unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip,
Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function have the logo as shown above.
Note:
Depending on the disc type or playing status, some SIMPLINK operation may
differ from your purpose or not work.
3
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 4
Licenses
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master
Audio are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
“BD-LIVE” logo is a trademark of Blu-ray Disc Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“Blu-ray Disc” is a trademark.
“BONUSVIEW” is trademark of Blu-ray Disc Association.
This product is licensed under the AVC patent portfolio license and VC-1 patent
portfolio license for the personal and non-commercial use of a consumer to (i)
encode video in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1 Video. No license
is granted or shall be implied for any other use. Additional information may be
obtained from MPEG LA, LLC. See http://www.mpegla.com.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and
Sony Corporation.
YouTube is a trademark of Google Inc.
DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital
Living Network Alliance.
WIFI CERTIFIED 802.11n based on Draft 2.0.
Draft 2.0 refers to the version of the not-yet-ratified IEEE 802.11n standard used
in Wi-Fi Alliance as of June 2007.
4
The specifications of the 802.11n WLAN (wireless local area network) are draft
specifications and not final. If the final specifications differ from the draft
specification, it may affect the ability of this device to communicate with other
802.11n WLAN devices.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 5
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
Playing YouTube videos . . . . . . . . . . . . . . . . . . . . . . . . . .51-53
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Connections to your TV . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-57
Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . .15-16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
The unit’s Audio Output Specifications . . . . . . . . . . . . . . . . .17
Resolution Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
IMPORTANT INFORMATION RELATING TO NETWORK
SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Connecting your Home Network . . . . . . . . . . . . . . . . . . .20-23
Open source software notice . . . . . . . . . . . . . . . . . . . . . . . .60
Network Software Update . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Using a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Adjust the Setup settings . . . . . . . . . . . . . . . . . . . . . . . .27-33
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-38
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . . . . .39
Enjoying BD-LIVE™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Playing a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Listening to music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-44
Accessing DLNA server . . . . . . . . . . . . . . . . . . . . . . . . . .45-48
Accessing your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-50
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
5
BD390-P-BSGPLLK-NEW-ENG
8/20/09
11:43 AM
Page 6
Introduction
Handling the Unit
To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference.
This manual provides information on the operation and maintenance of
your player. Should the unit require service, contact an authorized service
location.
When shipping the unit
Please save the original shipping carton and packing materials. If you need
to ship the unit, for maximum protection, re-pack the unit as it was
originally packed at the factory.
About the
Symbol Display
“ ” may appear on your TV display during operation and indicates that
the function explained in this owner’s manual is not available on that
specific media.
Symbols Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols are applicable only
to the disc represented by the symbol.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit.
Wiping with strong pressure may damage the surface.
Do not leave rubber or plastic products in contact with the unit for a long
period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or thinner, as these
might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc
drive parts are dirty or worn, the picture quality could be diminished.
For details, please contact your nearest authorized service centre.
Notes on Discs
ALL
BD
All discs listed below
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in Video mode or VR
mode and finalized
AVCHD
DVD±R/RW in AVCHD format
ACD
Audio CDs
MOVIE
Movie files contained in the USB/Disc
MOVIE-N Movie files in the DLNA server or PC
MUSIC
Music files contained in the USB/Disc
MUSIC-N Music files in the DLNA server or PC
6
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so
that fingerprints do not get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc
from the centre to out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 7
Playable Discs
Blu-ray Disc
- Discs such as movies that can be purchased or rented.
- BD-R/RE discs that contain audio titles, Movie, Music or Photo
files.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented.
DVD-R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc also
- AVCHD format
- DVD-R discs that contain audio titles, Movie, Music or Photo
files.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and finalized only
- AVCHD format
- DVD-RW discs that contain audio titles, Movie, Music or Photo
files.
Notes:
Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW)
discs cannot be played on the unit.
Do not attach any seal or label to either side (the labeled side or the
recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal).
Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded
discs (CD-R/RW or DVD±R/RW) may not be playable.
DVD±R/RW and CD-R/RW discs recorded using a personal computer or
a DVD or CD Recorder may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the player’s lens.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of
the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)
This player requires discs and recordings to meet certain technical
standards in order to achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards. There are many different
types of recordable disc formats (including CD-R containing MP3 or
WMA files) and these require certain pre-existing conditions to ensure
compatible playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right
to grant such permission. Permission should always be sought from the
copyright owner.
You have to set the disc format option to [Mastered] in order to make the
discs compatible with the LG players when formatting rewritable discs.
When setting the option to Live System, you cannot use it on LG player.
(Mastered/Live File System : Disc format system for windows Vista)
DVD+R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc also
- AVCHD format
- DVD+R discs that contain audio titles, Movie, Music or Photo
files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- AVCHD format
- DVD+RW discs that contain audio titles, Movie, Music or Photo
files.
Audio CD (8 cm / 12 cm disc)
Audio CDs or CD-Rs/RWs in audio CD format that can be
purchased.
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, Movie, Music or Photo
files.
7
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 8
BD-ROM Disc Features
BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a
single sided disc - about 5 to 10 times the capacity of a DVD.
BD-ROM Discs also support the highest quality HD video available in the
industry (up to 1920 x 1080) - Large capacity means no compromise on
video quality. Furthermore, a BD-ROM disc has the same familiar size and
look as DVD.
The following BD-ROM disc features are disc dependent and will vary.
Appearance and navigation of features will also vary from disc to disc.
Menu sounds
When you highlight or select a menu option, sounds can be heard such as
button clicks or a voice-over explaining the highlighted menu choice.
Multi-page/PopUp Menus
With DVD-Video, playback is interrupted each time a new menu screen is
accessed. Due to BD-ROM disc’s ability to preload data from the disc
without interrupting playback, a menu can consist of several pages.
You can browse through the menu pages or select different menu paths,
while the audio and video remain playing in the background.
Not all discs will have the features described below.
Interactivity
Certain BD-ROM Discs may contain animated menus and/or trivia games.
BD-ROM, Hybrid disc have both BD-ROM and DVD (or CD) layers on
one side. On such discs, BD-ROM layer will be only played back in this
player.
User Browsable Slideshows
With BD-ROM Discs, you can browse through various still pictures while
the audio remains playing.
Video highlights
The BD-ROM format for movie distribution supports three highly advanced
video codecs, including MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1.
HD video resolutions are also available:
1920 x 1080 HD
Subtitles
Depending on what is contained on the BD-ROM disc, you may be able to
select different font styles, sizes and colours for some subtitles. Subtitles
may also be animated, scrolled or faded in and out.
1280 x 720 HD
Graphic planes
Two individual, full HD resolution (1920x1080) graphic planes (layers) are
available on top of the HD video layer. One plane is assigned to videorelated, frame accurate graphics (like subtitles), and the other plane is
assigned to interactive graphic elements, such as buttons or menus.
For both planes, various wipes, fades and scroll effects may be available.
For High-Definition Playback
To view high-definition contents from BD-ROM discs, an HDTV is required.
Some discs may require HDMI OUT for viewing of high-definition contents.
Ability to view high-definition contents in BD-ROM discs may be limited
depending on the resolution of your TV.
8
BD-J Interactive Capability
The BD-ROM format supports Java for interactive functions. “BD-J” offers
content providers almost unlimited functionality when creating interactive
BD-ROM titles.
BD-ROM Disc Compatibility
This player supports BD-ROM Profile 2.
• Discs supporting BD-Live (BD-ROM version 2 Profile 2) that allows
interactive functions to be used when this unit is connected to the
Internet in addition to the BONUSVIEW function.
• Discs supporting BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1/Final Standard Profile) that allows Virtual packages or Picture-inPicture functions to be used.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 9
Regional Code
Certain System Requirements
This unit has a regional code printed on the rear of the unit. This unit can
play only BD-ROM or DVD discs labeled same as the rear of the unit or
“ALL”.
For high definition video playback:
AVCHD (Advanced Video Codec High Definition)
• This player can playback AVCHD format discs. These discs are normally
recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format is capable of compressing images at
higher efficiency than that of the conventional image compressing
format.
• Some AVCHD discs use the “x.v.Color” format.
• This player can playback AVCHD discs using “x.v.Color” format.
• Some AVCHD format discs may not play, depending on the recording
condition.
• AVCHD format discs need to be finalized.
• “x.v.Color” offers a wider colour range than normal DVD camcorder
discs.
Compatibility Notes
• Because BD-ROM is a new format, certain disc, digital connection and
other compatibility issues are possible. If you experience compatibility
problems, please contact an authorized Customer Service Centre.
• Viewing high-definition content and up-converting standard DVD content
may require a HDMI-capable input or HDCP-capable DVI input on your
display device.
• Some BD-ROM and DVD discs may restrict the use of some operation
commands or features.
• Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with
maximum 7.1 channels if you use HDMI connection for the audio output
of the unit.
• You can use a USB device that is used to store some disc related
information, including downloaded on-line content. The disc you are
using will control how long this information is retained.
• High definition display that has COMPONENT or HDMI input jacks.
• BD-ROM disc with high definition content.
• HDMI or HDCP capable DVI input on your display device is required for
some content (as specified by disc authors).
• For up-conversion of standard definition DVD, a HDMI or HDCP capable
DVI input on your display device is required for copy protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio
playback:
• An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD) decoder.
• Main, centre, surround speakers and subwoofer as necessary for
chosen format.
Important Notice for TV colour system
The colour system of this player differs according to currently playing
discs.
For example, when the player plays back the disc recorded in the NTSC
colour system, the image is outputted as a NTSC signal.
Only the multi system colour TV can receive all signals outputted from the
player.
Notes:
• If you have a PAL colour system TV, you will see just distorted images
when using discs or video contents recorded in NTSC.
• The multi system colour TV changes the colour system automatically
according to input signals. In case that the colour system is not changed
automatically, turn it off and then on to see normal images on screen.
• Even if the disc recorded in NTSC colour system are well displayed on
your TV, these may not be recorded correctly on your recorder.
9
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 10
Remote control
a
a c N (PLAY): Starts playback.
X (PAUSE): Pauses playback.
AUDIO (
channel.
m / M (SCAN): Searches backward or forward.
): Selects an audio language or audio
. / > (SKIP): Go to next or previous chapter /
track / file.
): Selects a subtitle language.
d TITLE/POP-UP: Displays the DVD title menu or
BD-ROM’s popup menu, if available.
ZOOM: Displays or exits the [Zoom] menu.
DISPLAY: Displays or exits On-Screen Display.
0-9 numerical buttons: Select numbered options in a
menu.
TV Control Buttons: See page 54.
DISC MENU: Accesses menu on a disc.
b Direction buttons: Selects an option in the menu.
ENTER (
): Acknowledges menu selection.
CLEAR: Removes a mark on the search menu or a
number when setting the password.
REPEAT: Repeat a desired section or sequence.
RESOLUTION: Sets the output resolution for HDMI and
COMPONENT VIDEO OUT jacks.
RETURN (O): Exits the menu or resumes playback.
The resume play function may not work depending on
the BD-ROM disc.
PIC MODE: Displays or exits the [Picture Mode] menu.
MARKER: Marks any point during playback.
Point the Remote Control at the remote sensor and
press the buttons.
SEARCH: Displays or exits the search menu.
10
POWER: Switches the player ON or OFF.
HOME: Displays or exits the [Home Menu].
d
TV POWER: Switches the TV ON or OFF.
SUBTITLE (
c
x (STOP): Stops playback.
SUBTITLE ON/OFF: Switches the subtitle ON or OFF.
b
OPEN/CLOSE (Z): Opens and closes the disc tray.
Coloured (A, B, C, D) buttons: Use to navigate
BD-ROM menus. They are also used for [MOVIE],
[PHOTO], [MUSIC], [My Media] and [YouTube] menu.
Remote Control Operation
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote
Control, and insert a R03 (size AAA) battery with
and
matched correctly.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 11
Front panel
a
b
c
d
e
f
a 1 (POWER) Button
Switches the unit ON or OFF.
b Disc Tray
Insert a disc here.
c Display Window
Shows the current status of the player.
d Remote Sensor
Point the remote control here.
e OPEN/CLOSE (Z)
Opens or closes the disc tray.
g
h
i
f N / X (PLAY / PAUSE)
Starts playback.
Pause playback temporarily,
press again to exit pause mode.
g x (STOP)
Stops playback.
h . / > (SKIP)
Go to next or previous file/track/chapter.
i USB Port
Connect a USB device.
11
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 12
Rear panel
a
b
f
g
c
d
e
h
i
a AC IN connector
Connect the supplied power cord.
g 2CH AUDIO OUT (Left/Right)
Connect to a TV with 2 channel audio inputs.
b COMPONENT VIDEO OUT (Y PB PR)
Connect to a TV with Y Pb Pr inputs.
h DIGITAL AUDIO OUT (OPTICAL)
Connect to digital (optical) audio equipment.
c DIGITAL AUDIO OUT (COAXIAL)
Connect to digital (coaxial) audio equipment.
i 7.1CH ANALOG AUDIO OUT
Connect to 7.1CH analogue input on an audio equipment.
(SW – Subwoofer, C – Centre, FL – Front Left, FR – Front Right
SL – Surround Left, SR – Surround Right, SBL – Surround Back Left,
SBR – Surround Back Right)
d HDMI OUT (Type A)
Connect to TV with HDMI inputs. (Interface for digital audio and video)
e LAN port
Connect a network with an always-on
broadband connection.
f VIDEO OUT
Connect to a TV with video inputs.
12
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 13
Connections to Your TV
Make one of the following connections, depending on the capabilities of
your existing equipment.
Tips:
• Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Use only one of the
connections described below.
• Please refer to the manuals of your TV, Stereo System or other devices
as necessary to make the best connections.
Cautions:
• Make sure the player is connected directly to the TV. Tune the TV to the
correct video input channel.
• Do not connect the player’s AUDIO OUT jack to the phono in jack
(record player) of your audio system.
• Do not connect your player via your VCR. The image could be distorted
by the copy protection system.
HDMI Connection
If you have a HDMI TV or monitor, you can connect it to this player using a
HDMI cable.
Connect the HDMI jack on the player to the HDMI jack on a HDMI
compatible TV or monitor (H).
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Note:
If a connected HDMI device does not accept the audio output of the unit,
the HDMI device’s audio sound may be distorted or may not output.
Tips:
• When you use HDMI connection, you can change the resolution for the
HDMI output. (Refer to “Resolution Setting” on page 18-19.)
• Select the type of video output from the HDMI OUT jack using
[HDMI Color Setting] option on the [Setup] menu (see page 28).
Cautions:
• Changing the resolution when the connection has already been
established may result in malfunctions. To solve the problem, turn off the
player and then turn it on again.
• When the HDMI connection with HDCP is not verified, TV screen is
changed to black screen. In this case, check the the HDMI connection,
or disconnect the HDMI cable.
• If there is noise or lines on the screen, please check the HDMI cable
(length is generally limited to 4.5m).
BD player
H
TV
13
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 14
Additional Information for HDMI
Tip:
• When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and this player. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720x576p, 1280x720p,
1920x1080i or 1920x1080p video input.
When you use COMPONENT VIDEO OUT connection, you can change
the resolution for the output. (Refer to “Resolution setting” on page 18-19.)
• Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
- This player does not playback and TV screen is changed to black
screen.
Video/Audio (Left/Right) Connection
Connect the VIDEO OUT jack on the player to the video in jack on the TV
using a video cable (V).
Connect the left and right AUDIO OUT jacks of the player to the audio left
and right IN jacks on the TV using the audio cables (A).
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on the player to the
corresponding input jacks on the TV using Y Pb Pr cables (C).
Connect the left and right AUDIO OUT jacks of the player to the audio left
and right IN jacks on the TV using the audio cables (A).
BD player
V
TV
BD player
A
TV
14
C
A
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 15
Connecting to an Amplifier
Make one of the following connections, depending on the capabilities of
your existing equipment.
Note:
Since many factors affect the type of audio output, see “The unit’s Audio
Output Specifications” on page 17 for details.
Connecting to an Amplifier via 7.1 Channel Analog
Audio Output
Connect the 7.1CH ANALOG AUDIO OUT (SW, C, FL, FR, SL, SR, SBL
and SBR) jacks on the player to the corresponding 7.1CH ANALOG IN
jacks on your amplifier. You need to set the audio input of your amplifier to
enjoy 7.1 channel surround sound. Refer to your amplifier’s owner’s
manual to set the audio input.
Connecting to an Amplifier via 2 Channel Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks on the player to the
audio left and right in jacks on your amplifier, receiver, or stereo system
using audio cables (A).
Connecting to an Amplifier via Digital Audio Output
(Optical or Coaxial)
BD player
Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in
jack (OPTICAL O or COAXIAL X) on your amplifier. Use an optional digital
(optical O or coaxial X) audio cable. You will need to activate the player’s
digital output. (See “[AUDIO] Menu” on pages 29-30.)
Amplifier/Receiver
BD player
A
O
x
You may need to set the [Speaker Setup] option in the [Setup] menu to
obtain the best surround sound via 7.1CH ANALOG AUDIO OUT
connection (see page 30).
Note:
If your amplifier has only 5.1 channel input jacks, connect all the analogue
audio output jacks except SBL and SBR outputs.
Amplifier/Receiver
15
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 16
Connecting to an Amplifier via HDMI Output
Connect the player’s HDMI OUT jack to the corresponding in jack on your
amplifier using a HDMI cable (H1). You will need to activate the player’s
digital output. (See “[AUDIO] Menu” on pages 29-30.)
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality. For this,
you need a multi-channel Audio/Video Receiver that supports one or more
of the audio formats supported by your player. Check the receiver manual
and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)
Notes:
• You must select a digital audio output and a maximum sampling
frequency that your Amplifier (or AV receiver) accepts using [SPDIF],
[HDMI] and [Sampling Freq.] options on the [Setup] menu
(see page 29-30).
• With digital audio connection (SPDIF or HDMI), Disc Menu button
sounds of BD-ROM may not be heard if the [SPDIF] or [HDMI] option is
set to [Primary Pass-Thru].
• If the audio format of the digital output does not match the capabilities of
your receiver, the receiver will produce a strong, distorted sound or no
sound at all.
• Multi-channel Digital Surround Sound via digital connection can only be
obtained if your receiver is equipped with a Digital Multi-channel
decoder.
• To see the audio format of the current disc in the on-screen display,
press AUDIO.
BD player
H1
Amplifier/Receiver
TV
H2
Tip:
Connect the amplifier’s HDMI output jack to HDMI input jack on your TV
using a HDMI cable (H2) if your amplifier has HDMI output jack.
16
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 17
The unit’s Audio Output Specifications
Jack/
Setting
Source
Analog
7.1 CH Output
SPDIF (DIGITAL AUDIO OUT) *5
PCM
Stereo
DTS
Re-encode *3 *6
Primary
Pass-Thru *1
Dolby Digital
PCM 5.1ch
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 7.1ch
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 7.1ch
PCM 2ch
DTS
Dolby Digital
DTS
PCM 5.1ch
PCM 2ch
DTS
DTS
DTS-HD
PCM 7.1ch
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 5.1ch
PCM 5.1ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 7.1ch
PCM 2ch
DTS
PCM 2ch
1
Jack/
Setting
Source
HDMI OUT
PCM
Stereo
PCM
Multi-Ch *3
DTS
Re-encode *6
Primary
Pass-Thru *1 *2 *3
Dolby Digital
PCM 2ch
PCM 5.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 7.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
Dolby TrueHD
PCM 2ch
PCM 7.1ch
DTS
DTS
PCM 2ch
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 7.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 5.1ch
DTS
PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 7.1ch
DTS
PCM 7.1ch *4
1
Notes:
*1 The secondary and interactive audio may not be included in the output
bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru].
(Except LPCM Codec : the output always include interactive and
secondary audio.)
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option
and [DTS re-encode] setting of the [SPDIF] option cannot be set
together. If you set the [HDMI] option to [PCM Multi-CH] or
[Primary Pass-Thru], the [SPDIF] option is set to [PCM Stereo]
automatically. Also, if you set the [SPDIF] option to [DTS Re-encode],
the [HDMI] option is set to [PCM Stereo] automatically.
*4 The LPCM audio recorded at 192kHz sampling frequency will be
outputted as stereo sound.
*5 On the PCM audio output, the sampling frequency of SPDIF (DIGITAL
AUDIO OUT) is limited to 96 kHz.
*6 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio
output is limited to 48 kHz and 5.1 ch. If the [HDMI] or [SPDIF] option
is set to [DTS re-encode], the DTS Re-encode audio is outputted for
BD-ROM discs, and the original audio is outputted for the other discs
(like [Primary Pass-Thru]).
• If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to
[Primary Pass-Thru] when the unit plays back Dolby Digital Plus or
TrueHD audio, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM
2ch”.
• If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby
TrueHD is outputted from HDMI OUT jack, SPDIF (DIGITAL AUDIO
OUT) jack is limited to “PCM 2ch” (When the HDMI and SPDIF are
connected simultaneously).
• The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and
PCM 44.1kHz/16 bit for Audio CD while playback.
• The Dolby TrueHD audio recorded on some Blu-ray discs consists of
Dolby Digital and TrueHD audio. Dolby Digital audio is output through
DIGITAL AUDIO OUT jacks and "DD" displays on the screen if TrueHD
audio is not output (for example, when [HDMI] is set to [PCM Stereo]
and [SPDIF] is set to [Primary Pass-Thru]).
• The analogue 2 channel output connection is always output PCM 2CH
sound.
*2 This player automatically selects the HDMI audio according to the
decoding capability of the connected HDMI device even though [HDMI]
option is set to [Primary Pass-Thru].
17
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 18
Resolution Setting
The player provides several output resolutions for HDMI OUT and
COMPONENT VIDEO OUT jacks.
You can change the resolution using [Setup] menu or pressing the
RESOLUTION button in stop mode.
Available resolution according to the resolution setting
• When the non-copy protected media is playing back
Video Output
HDMI OUT
Resolution
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
Note:
576i
576p
576i
Since several factors affect the resolution of video output, see “Available
resolution according to the resolution setting” on the right.
576p
576p
576p
720p
720p
720p
How to change the resolution using RESOLUTION
button
1080i
1080i
1080i
1080p / 24Hz
1080p / 24Hz
576i
1080i
1080p / 50Hz
1080p / 50Hz
576i
1080i
Press RESOLUTION repeatedly in stop mode to change the resolution.
The display window will show you the current resolution.
How to change the resolution using the [Setup] menu
1 Press HOME and the [Home Menu] appears.
2 Select the [Setup] and press ENTER. The [Setup] menu appears.
3 Use v / V to select [DISPLAY] option then press B to move to the
• When the copy protected media is playing back
Video Output
HDMI OUT
Resolution
second level.
4 Use v / V to select the [Resolution] option then press B to move to the
third level.
5 Use v / V to select the desired resolution then press ENTER to confirm
your selection.
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
576i
576p
576i
576p
576p
720p
720p
576i
576p
576p
1080i
1080i
576i
576p
1080p / 24Hz
1080p / 24Hz
576i
576p
1080p / 50Hz
1080p / 50Hz
576i
576p
1
Notes:
• Depending on your display, some of the resolution settings may result in
the picture disappearing or an abnormal picture appearing. In this case,
press HOME then RESOLUTION repeatedly until the picture re-appear.
• This player supports simultaneous output of all video out jacks. The
resolution of the HDMI output will not be the same as the resolution
output on the component video output.
18
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 19
HDMI OUT connection
• For the 576i resolution setting, real output resolution of HDMI OUT will
change to 576p.
• If you select a resolution manually and then connect the HDMI jack to
TV and your TV does not accept it, the resolution setting is set to [Auto].
• If you select a resolution that your TV does not accept, the warning
message will appear. After resolution change, if you cannot see the
screen, please wait 20 seconds and the resolution will automatically
revert back to the previous resolution.
• The 1080p video output frame rate may be automatically set to either
24Hz or 50Hz depending both on the capability and preference of the
connected TV and based on the native video frame rate of the content
on the BD-ROM disc.
COMPONENT VIDEO OUT connection
• For the 720p, 1080i, 1080p resolution setting with protected media, real
output resolution of COMPONENT VIDEO OUT will change to 576i or
576p depending on the connectivity of HDMI cable.
• BD and DVD could prevent up-scaling on analogue output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always outputted at 576i
resolution.
19
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 20
Connecting to your Home Network
This player can be connected to a local area network (LAN) via the LAN
port on the rear panel or the internal wireless module.
By connecting the unit to a broadband home network, you have access to
services such as software updates, My Media, BD-Live interactivity and
streaming services.
Using a wired network provides the best performance, because the
attached devices connect directly to the network and are not subject to
radio frequency interference.
Cautions:
• When plugging or unplugging the LAN cable, hold the plug portion of the
cable. When unplugging, do not pull on the LAN cable but unplug while
pressing down on the lock.
Wired network
• Do not connect a modular phone cable to the LAN port.
Connect the player’s LAN port to the corresponding port on your Modem or
Router using a commercially available LAN or Ethernet cable (CAT5 or
better with RJ45 connector).
In the example configuration for wired connection below, this player would
be able to access content from any PC connected via the Modem/Router.
• Since there are various connection configurations, please follow the
specifications of your telecommunication carrier or internet service
provider.
• Adjusting [NETWORK] settings for wired network
If there is a DHCP server on the local area network (LAN) via wired
connection, this player will automatically be allocated an IP address.
After making the physical connection, a small number of home networks
may require the player's network setting to be adjusted. Adjust the
[NETWORK] setting as follows.
1.
Select the [Connection Setting]
option in the [Setup] menu then
press B or ENTER.
2.
The [CONNECTION SETTING]
menu appear on the screen.
Use v V to select [Wired] and
press ENTER.
Modem/Router
Modem/Router
Broadband
Broadband
Service
Service
PC
20
BD390-P-BSGPLLK-NEW-ENG
3.
8/17/09
3:42 PM
Page 21
Use v V b B to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to
allocate an IP address
automatically.
Note: If there is no DHCP server on the network and you want to set
the IP address manually, select [Static] then set the [IP Address],
[Subnet Mask], [Gateway] and [DNS Server] using v V b B and
numerical buttons. If you make a mistake while entering a number,
press CLEAR to clear the highlighted part.
4. Select [OK] and press ENTER to apply network settings.
5.
The player will ask you to test the
network connection. Select [OK]
and press ENTER to complete the
network connection.
Wireless network
Another connection option is to use an Access Points or an wireless
routers. In the example configuration for wireless connection below, this
player would be able to access content from any PC connected via the
Modem/Router.
Wireless
Communication
BD
BD Player
Player
Access Point/
Point/
Wireless router
Wireless
router
Broadband
Broadband
Service
Service
6. If you select [Test] and press ENTER at step 5 above, the network
connection status is displayed on the screen.
You can also test it on the [Connection Status] in the [Setup] menu.
Internet
connection status
PC
The network configuration and connection method may vary depending on
the equipment in use and the network environment.
Local Area
Network status
This player is equipped with an IEEE 802.11n wireless module, which also
supports the 802.11b/g standards. For the best wireless performance, we
recommends using a IEEE 802.11n certified Wi-Fi network (access point or
wireless router).
Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
21
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 22
Caution:
Wired internet connection is strongly recommended.
Using the [My Media] features, network update and video streaming
services (such as YouTube Videos) with wireless network can be affected
by the household devices using radio frequencies.
• Adjusting [NETWORK] settings for wireless network
For the wireless network connection, the player needs to be set up for
network communication. This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follows.
Setting up the access point or the wireless router is required before
connecting the player to the network.
1.
Select the [Connection Setting]
option in the [Setup] menu then
press B or ENTER.
2.
The [CONNECTION SETTING]
menu appear on the screen. Use
v V to select [Wireless] and
press ENTER.
3.
Selects [OK] and press ENTER to
continue. The new connection
settings resets the current network
settings.
4. The player scans the all available access points or wireless routers
within range and display them as a list. Use v V to select an access
point or wireless router on the list, and then press ENTER.
If you have security on your access point or wireless router, verify that
the WEP or WPA key that was entered into the player matches the
router’s information exactly. You need to input the security code as
necessary.
Notes:
• WEP security mode generally have 4 keys available on an access
point or wireless router’s setting. If your access point or wireless
router use WEP security, enter the security code of the key “No.1” to
connect on your home network.
• An Access Point is a device that allows you to connect to your home
network wirelessly.
[Manual] – Your access point may not be broadcasting its access
point name(SSID). Check your router settings through your computer
and either set your router to broadcast SSID, or manually enter the
access point name(SSID) in [Manual].
[Push Button] – If your access point or wireless router that
supports Push Button Configuration method, select this option and
press the Push Button on your access point or wireless router within
2 minutes. You do not need to know the access point name (SSID)
and security code of your access point or wireless router.
5. Follow the steps 3-6 on page 21 to complete the network
connection settings.
22
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 23
Notes on Network Connection
• Many network connection problems during set up can often be fixed by
re-setting the router or modem. After connecting the player to the home
network, quickly power off and/or disconnect the power cable of the
home network router or cable modem. Then power on and/or connect
the power cable again.
• Depending on the internet service provider (ISP), the number of devices
that can receive internet service may be limited by the applicable terms
of service. For details, contact your ISP.
• Our company is not responsible for any malfunction of the player and/or
the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
• The features of BD-ROM discs made available through the Internet
Connection feature are not created or provided by our company, and our
company is not responsible for their functionality or continued
availability. Some disc related material available by the Internet
Connection may not be compatible with this player. If you have
questions about such content, please contact the producer of the disc.
• Some internet contents may require a higher bandwidth connection.
• Even if the player is properly connected and configured, some internet
contents may not operate properly because of internet congestion, the
quality or bandwidth of your internet service, or problems at the provider
of the content.
• Some internet connection operations may not be possible due to certain
restrictions set by the Internet service provider (ISP) supplying your
broadband Internet connection.
• A DSL modem is required to use DSL service and a cable modem is
required to use cable modem service. Depending on the access method
of and subscriber agreement with your ISP, you may not be able to use
the internet connection feature contained in this player or you may be
limited to the number of devices you can connect at the same time. (If
your ISP limits subscription to one device, this player may not be
allowed to connect when a PC is already connected.)
• The use of a “Router” may not be allowed or its usage may be limited
depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
• The wireless network operate at 2.4GHz radio frequencies that are also
used by other household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be affected by
interference from them.
• Turn off all unused network equipment in your local home network.
Some devices may generate network traffic.
• For the purpose of the better transmission, placing the player from the
access point as close as possible.
• In some instances, placing the access point or wireless router at least
0.45m above the floor may improve the reception.
• Move closer to the access point if possible or re-orient the player so
there is nothing between it and the access point.
• The reception quality over wireless depends on many factors such as
type of the access point, distance between the player and access point,
and the location of the player.
• Set your access point or wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
• Any fees charged by an ISP including, without limitation, connection
charges are your responsibility.
• A 10 Base-T or 100 Base-TX LAN port is required for wired connection
to this player. If your internet service does not allow for such a
connection, you will not be able to connect the player.
• You must use a Router to use xDSL service.
23
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 24
Network Software Update
Updating software in the [Setup] menu
Network update notification
You can update the player using the latest software to enhance the
products operation and/or add new features. You can update the software
by connecting the unit directly to the software update server.
From time to time, performance improvements and/or additional features or
services may be made available to units that are connected to a
broadband home network. If there is new software available and the unit is
connected to a broadband home network, the player will inform you about
the update as follows.
Option 1:
1.
2.
Step 1: Check the Network Connection and settings
See page 20-23.
Step 2: Updating Software
Cautions:
The update menu will appear on the screen when you turn on the player.
Use b / B to select a desired option and then press ENTER.
[OK] - Starts the software update.
[Cancel] - Exits the update menu and displays it next booting.
[Hide] - Exits the update menu and it does not appear until next
software is uploaded in the update server.
• Before updating the software in your player, remove any disc and USB
Device from the player.
• Before updating the software in your player, turn the player off and then
turn it back on.
• During the software update procedure, do not turn off the player or
disconnect AC power, or do not press any button.
• If you cancel the update, turn off the power and turn it on for stable
performance.
• This unit cannot be updated to previous software version.
1. Select [Software Update] option in the [Setup] menu then press B or
ENTER.
Option 2:
If the software update is available from the update server, the “Software
Update” icon appears at the bottom of the Home menu. Press blue
coloured button to start the update procedure. (see page 24-25 for more
detail)
2. The player will check for the newest update.
Caution: Pressing ENTER while checking for the update will end the
process.
Note: If there is no update available, the Message, “No update is
found.” appears. Press ENTER to return to the [Home Menu].
24
Software Update
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 25
3. If newer version exists, the message “A new update was found. Do
you want to download it?” appears.
4. Select OK to download the update. (Selecting [Cancel] will end the
update.)
5. The player starts downloading the newest update from the server.
Tip:
The Software Update function may not work properly depending on
your internet environment. In this case, you can obtain the latest
software from the authorized LG Electronics Service Centre then
update your player. Refer to “Customer Support” on page 58.
(Downloading will take about 80 seconds at the network speed of
4Mbps Speed.)
6. When downloading is completed, the message, “Download is
complete. Do you want to update?” appears.
7. Select OK to start updating.
(Selecting [Cancel] will end the update and downloaded file will not be
re-usable. To update software the next time, the software update
procedure has to be started from the beginning again.)
Caution: Do not turn off the power during the software update.
Note: If the software includes the driver update, disc tray may open
during the process.
8. When update is completed, the message, “Update is complete.” will
appear, and the power will turn off automatically after 5 seconds.
9. Turn the power back on. The system now operates with the new version.
10. After completing the update process, repeat procedures 1-4 in Step 4
and check if there are no more updates available.
25
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 26
Notes:
Using a USB device
This unit can play the movie, music and photo
files contained in the USB device.
ON REMOTE
• This player supports USB flash memory/external HDD formatted in
FAT16, FAT32 and NTFS when accessing files (music, photo, movie).
However, for BD-Live, only FAT16 and FAT32 formats are supported.
Please use the Internal Flash Memory or USB flash memory/external
HDD formatted in either FAT16 or FAT32 when using BD-Live.
1. Insert a USB device to the USB port:
–
2 Displays the [Home Menu]:
HOME
3 Select a main option:
[Movie], [Photo] or [Music] option
b B, ENTER
• The USB device can be used for the local storage for enjoying BD-Live
discs with Internet
4 Select the [USB] option:
bB
• This unit can support up to 4 partitions of the USB device.
5 Displays corresponding menu list:
[MOVIE], [PHOTO] or [MUSIC] menu appears.
Details for the menu are on pages 41-44.
ENTER
• Do not extract the USB device during operation (play, etc.).
• An USB device which requires additional program installation when you
have connected it to a computer, is not supported.
Tip:
• USB device: USB device that support USB1.1 and USB2.0.
If you select the [Movie], [Photo] or [Music] option when a USB device is
connected and a disc is inserted simultaneously, the menu for selecting a
media will appear. Select a media then press ENTER.
• Movie Files, Music files and photo files can be played. For details of
operations on each file, refer to relevant pages.
• Regular back up is recommended to prevent data loss.
• If you use a USB extension cable or USB HUB, the USB device may not
be recognized.
• Some USB device may not work with this unit.
• Digital camera and mobile phone are not supported.
Insert/Remove a USB device
Inserting a USB device – Insert straight-in until it fits into place.
Removing a USB device – Withdraw the USB device carefully.
USB
USBFlash
FlashDrive
Drive
USB External HDD
USB
26
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 27
Adjust the Setup settings
Using the Home Menu
ON REMOTE
ON REMOTE
1 Displays the [Home Menu]:
HOME
1 Displays the [Home Menu]:
HOME
2 Selects an option:
vVbB
2 Selects the [Setup] option:
v V b B, ENTER
3 Displays the selected option menu:
ENTER
3 Selects a desired option on the first level:
vV
4 Exit the [Home Menu]:
HOME
4 Moves to the second level:
B
5 Select a desired option on the second level:
vV
6 Moves to the third level:
B
7 Adjust or confirm the setting:
v V, ENTER
8 Go back to the previous level:
b
9 Exit the [Setup] menu:
HOME
[Movie] – Start video media’s playback or displays the [MOVIE] menu.
[Photo] – Display the [PHOTO] menu. (page 43-44)
[Music] – Display the [MUSIC] menu. (page 42)
[My Media] – Display and play the shared contents from the selected
server. (pages 45-50)
[YouTube] – Watch YouTube videos streamed from the Youtube server via
the internet to your TV. (pages 51-53)
[Setup] – Display the [Setup] menu. (page 27-33)
Note:
The unit will be in stop mode then the [Home Menu] will appear if you
press HOME during playback.
First level
Second level
Third level
27
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 28
[DISPLAY] Menu
[1080p] – Outputs 1080 lines of progressive video.
[1080i] – Outputs 1080 lines of interlaced video.
[720p] – Outputs 720 lines of progressive video.
[576p] – Outputs 576 lines of progressive video.
[576i] – Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select [24Hz] for smooth presentation
of film material (1080/24p) with a HDMI-equipped display compatible with
1080/24p input.
TV Aspect Ratio
[4:3 Letter Box] – Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and below the
picture.
[4:3 Pan Scan] – Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. Both sides of the
picture are cut off.
[16:9 Original] – Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original 4:3 aspect ratio, with black
bars appearing at the left and right sides.
[16:9 Full] – Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the
entire screen.
Note:
You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p.
Resolution
Sets the output resolution of the Component and HDMI video signal.
Refer to “Resolution Setting” on page 18-19 for details about the
resolution.
[Auto] – If the HDMI OUT jack is connected to TVs providing display
information (EDID), automatically selects the resolution best suited to
the connected TV. If the COMPONENT VIDEO OUT is only connected,
this changes the resolution to 1080i as default resolution.
28
Notes:
• When you select [24Hz], you may experience some picture disturbance
when the video switches video and film material. In this case, select
[50Hz].
• Even when [1080p Display Mode] is set to [24Hz], if your TV is not
compatible with 1080/24p, the actual frame frequency of the video
output will be 50Hz to match the video source format.
• When the 1080p/24Hz video source is outputted via HDMI connection,
the VIDEO OUT and COMPONENT VIDEO OUT will not output any
video signal.
HDMI Color Setting
Select the type of output from the HDMI OUT jack. For this setting, please
refer to the manuals of your display device.
[YCbCr] – Select when connecting to a HDMI display device.
[RGB] – Select when connecting to a DVI display device.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 29
[LANGUAGE] Menu
HDMI / SPDIF (Digital Audio Output)
Display Menu
Select a language for the [Setup] menu and on-screen display.
Disc Menu / Disc Audio / Disc Subtitle
Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.
[Original] – Refers to the original language in which the disc was
recorded.
[Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according
to the language code list on page 55.
[Off] (for Disc Subtitle) – Turn off Subtitle.
Note:
Depending on the disc, your language setting may not work for some
discs.
[AUDIO] Menu
Each disc has a variety of audio output options. Set the player’s Audio
options according to the type of audio system you use.
Note:
Select the output sound format when a device equipped with a HDMI or
Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO
OUT jack on this player.
[PCM Stereo] – Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-channel digital stereo
decoder.
[PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s
HDMI OUT jack to a device with multi-channel digital decoder.
[DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS decoder.
[Primary Pass-Thru] – Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
Notes:
• When [HDMI] option is set to [PCM Multi-Ch], the audio may output as
PCM Stereo if the PCM Multi-Ch information is not detected from HDMI
device with EDID.
• If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the DTS Reencode audio is outputted for BD-ROM discs with secondary audio and
the original audio is outputted for the other discs (like [Primary PassThru]).
Since many factors affect the type of audio output, see “The unit’s Audio
Output Specifications” on page 17 for details.
29
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 30
Sampling Freq. (Digital Audio Output)
[192KHz] – Select this if your A/V Receiver or Amplifier is capable of
handling 192 KHz signals.
Select a connection type among [2.1 Channel], [5.1 Channel] and
[7.1 Channel] and press ENTER. The [Speaker Setup] menu appears.
[96KHz] – Select this if your A/V Receiver or Amplifier is NOT capable
of handling 192 KHz signals. When this choice is made, this unit
automatically converts any 192 KHz signals to 96 KHz so your system
can decode them.
[48KHz] – Select this if your A/V Receiver or Amplifier is NOT capable
of handling 192 KHz and 96 KHz signal. When this choice is made,
this unit automatically converts any 192 KHz and 96 KHz signals to 48
KHz so your system can decode them.
Check the documentation for your A/V Receiver or Amplifier to verify its
capabilities.
DRC (Dynamic Range Control)
When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back,
you may wish to compress the dynamic range of the audio output (the
difference between the loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without losing clarity of sound.
Set DRC to [On] for this effect.
Note:
The DRC setting can be changed only when a disc is not inserted or the
unit is in complete stop mode.
Speaker Setup
To obtain the best possible sound via the 7.1CH ANALOG AUDIO OUT
connection, set the speaker size and sound level of speakers you have
connected.
[2.1 Channel] – Select this if you connect only the FL, FR and SW
jacks to the amplifier.
[5.1 Channel] – Select this if you connect only the FL, FR, SL, SR, C
and SW jacks to the amplifier.
[7.1 Channel] – Select this if you connect all of the 7.1CH ANALOG
AUDIO OUT jacks to the amplifier.
30
On the [Speaker Setup] menu, you can set each speaker using the
following steps:
1. Use b B to select a speaker you want to set in the [Speaker] field.
2. Use v V to select the [Size] or [Level] option. And then press b B to
select an appropriate setting.
3. Repeat step 1-2 to set other speakers.
4. Use v V to select [Test] and press ENTER to emit the test sound
from the selected speaker.
5. Use v V to select [OK] to complete the speaker setting.
Notes:
• The [Speaker Setup] can be changed only when a disc is not inserted or
the unit is in complete stop mode.
• Because the amplifier is not included on this player for connecting
speakers directly, the sounds are affected by the receiver’s performance.
Thus, the signal level may not be changed correctly when you change
size and level.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 31
[LOCK] Menu (Parental Control)
The [LOCK] settings affect only BD and DVD playback.
DVD Rating DVD
Blocks playback of rated disc based on their content. (Not all discs are
rated.)
[Rating 1-8] – Rating one (1) has the most restrictions and rating eight
(8) is the least restrictive.
[Unlock] – If you select unlock, parental control is not active and the
disc plays in full.
BD Rating
To access the any features in [LOCK] settings, you must enter the 4-digit
security code you have created.
If you have not entered a password yet, you are prompted to do so. Enter
a 4-digit password and press ENTER. Enter it again and press ENTER to
verify.
Password
You can create, change or delete the password.
[New] – Enter a 4-digit password and press ENTER. Enter it again and
press ENTER to create a new password.
[Change] – Enter the current password and press ENTER.
Enter a 4-digit password and press ENTER. Enter it again and press
ENTER to create a new password.
BD
Set an age limit of BD-ROM play. Use number buttons to input an age limit
for BD-ROM viewing.
[255] – All BD-ROM can be played.
[0-254] – Prohibits play of BD-ROM with corresponding ratings
recorded on them.
Note:
The [BD rating] will be applied only for the BD disc that containing the
Advanced Rating Control.
Area Code
Enter the code of the area whose standards were used to rate the DVD
video disc, based on the list on page 55.
[Delete] – Enter the 4-digit password and press ENTER to delete the
password.
Tip:
If you make a mistake before pressing ENTER, press CLEAR. Then input
the correct password.
If you forget your password
If you forget your password, you can clear it using the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The password is cleared.
31
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 32
[NETWORK] Menu
BD-LIVE connection
The [NETWORK] settings are needed to use the software update, BD Live,
My Media and YouTube features.
Some BD-ROM discs may enable you to access special BD-ROM sites, if
you connect the player to the Internet. For example, if a BD-ROM site
includes content such as links to future movie trailers, you can watch the
downloaded on-line content on the player.
You do not need to connect to a PC to use this function.
You can restrict Internet access when BD-Live functions are used.
Preparations:
• This feature requires an always-on broadband internet connection.
(see page 20-23.)
• A BD-ROM disc compatible with this feature is required. Not all
BD-ROM discs are compatible.
Connection Setting
If you have connected this player to a local area network (LAN), the player
needs to be set up for network communication. (See “Connecting to your
Home Network” on pages 20-23.)
Connection Status
If you want to check the network status on this player, select the
[Connection Status] options and press B or ENTER to check whether a
connection to the network and the internet have been established.
32
[Permitted] – Internet access is permitted for all BD-Live contents.
[Partially permitted] – Internet access is permitted only for BD-Live
contents which have content owner certificates. Internet access and
AACS Online functions are prohibited for all BD-Live contents without
a certificate.
[Prohibited] – Internet access is prohibited for all BD-Live contents.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 33
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc.
This is an official DivX Certified device that plays DivX video.
Visit www.divx.com for more information and software tools to convert your
files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX® Certified device must be
registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the [DivX VOD] section in the
[Setup] menu. Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
Skin
Changes the background of the initial screen.
BD Storage Select
This player can store some BD-ROM disc related information, including
downloaded on-line content such as movie trailers and special features
into the internal Flash Memory or an USB device.
[Built-In Storage] – Store the downloaded Blu-ray disc content on the
Internal Flash Memory.
[USB Storage] – Store the downloaded Blu-ray disc content on the
connected USB device.
BD Storage Clear
Initializes the BD contents from the built-in storage or the connected USB
storage.
[Built-In Storage] – Delete all the downloaded contents from the
built-in storage.
[USB Storage] – Delete all the downloaded contents from the
connected USB storage.
[DivX reg. Code] – Displays the registration code of your player.
[Deactivate] – Deactivate your player and display the deactivation
code.
Note:
All the downloaded videos from DivX VOD can only be played back on this
unit.
Factory Set
You can reset the player to its original factory settings.
Note:
If you reset the player to its original factory settings using [Factory Set]
option, you have to set the network settings again.
Software Update
You can update the software by connecting the unit directly to the software
update server (see page 24-25).
Disclaimer Notice
Press ENTER or B to view the notice of Network Service Disclaimer on
page 59.
33
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 34
Resume playback ALL
Play a disc
ON REMOTE
1 Open the disc tray:
Z)
OPEN/CLOSE (Z
2 Inserts a disc:
-
3 Close the disc tray:
Z)
OPEN/CLOSE (Z
4 Adjusts the disc menu settings:
A disc menu may not appear on the screen
depending on the disc.
v V b B, ENTER
5 Starts playback:
N)
PLAY (N
6 Stops playback:
x)
STOP (x
Notes:
•
•
When you turn on the player or replace a disc, the player returns to the
initial default setting. Depending on the disc, a specific type of audio
that the disc has is output.
Depending on the pre-recorded contents of the BD-ROM, some
functions may not be available or may be operated differently than
other media.
If a disc menu screen is displayed
BD
DVD
AVCHD MOVIE
The menu screen may be displayed first after loading a disc which
contains a menu.
Use b B v V buttons to select the title/chapter you want to view, then
press ENTER to start playback.
During playback, press STOP (x) to stop playback.
The unit records the stopped point, depending on the disc. “Xx” appears
on the screen briefly. Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or unload the disc (“x” appears
on the screen.), the unit will clear the stopped point. (Xx = Resume Stop,
x = Complete Stop)
Notes:
• The resume point may be cleared when a button is pressed
(for example; POWER, OPEN/CLOSE, etc).
• On BD-Video discs including BD-J, the resume play function does not
work.
• On BD-ROM interactive title, the unit will be in Complete Stop mode if
you press STOP once during playback.
Skip to the next/previous chapter/track/file ALL
During playback, press . or > to go to the next chapter/track/file or
to return to the beginning of the current chapter/track/file.
Press . twice briefly to step back to the previous chapter/track/file.
Note:
When you are playing a content in the [My Media] menu, there may be
many types of contents in the current folder together. In this case, press
. or > to go to the previous or next content with same type.
Fast forward or fast reverse ALL
Press SCAN (m or M) to play fast forward or fast reverse during
playback.
You can change the various playback speeds by pressing
N) to continue play at
SCAN (m or M) repeatedly. Press PLAY (N
normal speed.
Notes:
• This function may not work on some disc or titles.
• Some music files on the [My media] menu may not operate this
function.
34
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 35
Repeating a specific portion (A-B)
Pause a playback ALL
During playback, press PAUSE (X) to pause playback. Press PLAY (N)
to continue playback.
Tip: During Audio CD or MP3/WMA playback, press X once again to
resume playback.
Frame-by-Frame playback
BD
DVD
AVCHD MOVIE
MOVIE-N
BD
DVD
AVCHD
ACD
Press REPEAT to select [A-] at the beginning of the portion you wish to
repeat and press ENTER at the end of the portion. Your selected portion will
be repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press REPEAT repeatedly to select [OFF].
See “Playing repeatedly” on page 35 for more details about repeat and
random icons in the [MUSIC] and [My Media] menu.
Press PAUSE (X) repeatedly to play Frame-by-Frame playback.
Playing in random order ACD
Slow down the playing speed
During playback, press REPEAT repeatedly to select a Random (
BD
DVD
AVCHD MOVIE
MOVIE-N
While the playback is paused, press SCAN M repeatedly to play in slow
motion (4 steps, forward only).
Playing repeatedly
BD
DVD
AVCHD
ACD
MUSIC MUSIC-N
During playback, press REPEAT repeatedly to select a desired repeat
mode. The current title, chapter or track will be played back repeatedly. To
return to normal playback, press REPEAT repeatedly to select [OFF].
When you are using the repeat, A-B repeat or random functions in the
[MUSIC] or [My Media] menu, refer to the mode icons as shown below.
Track – The current track or file will be played back repeatedly.
All – All the tracks or files will be played back repeatedly.
– Selected portion will be repeated continually. (Audio CD only)
– The tracks or files will be played back in random order.
All – All the tracks or files will be played back repeatedly in
random order.
To cancel the A-B repeat, repeat or Random playback, press CLEAR.
MUSIC MUSIC-N
) or
Random All (
All) mode icon. The tracks or files will be played in
random order. To return to normal playback, press REPEAT repeatedly to
delete the mode icons. See “Playing repeatedly” on page 35 for more
details about repeat and random icons in the [MUSIC] and [My Media]
menu.
Selecting a subtitle language
BD
DVD
AVCHD MOVIE MOVIE-N
During playback, press SUBTITLE ON/OFF to switch the subtitle on or off
and press SUBTITLE repeatedly to select a desired subtitle language.
OR
During playback, press DISPLAY to display the playback menu.
Use v V to select the [Subtitle] option then use b B to select desired
subtitle language.
Note:
Some discs allow you to change subtitle selections only via the disc menu.
If this is the case, press TITLE/POP-UP or DISC MENU button and choose
the appropriate subtitle from the selections on the disc menu.
Note:
If you press > once during Repeat Chapter/Track playback, the repeat
playback cancels.
35
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 36
Selecting a subtitle file MOVIE
If names of the movie file and subtitle file are same, subtitle file is played
automatically when playing the movie file. If the name of the subtitle file is
different from movie file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Use v V b B to select the subtitle file you wish to play in the [Movie]
menu,and then press MARKER. Press MARKER again to deselect the
subtitle file. Selected subtitle file will be displayed when you play the movie
file. If you press STOP (x) while playback, the subtitle selection is
canceled.
Hearing a different audio
BD
DVD
AVCHD MOVIE
MOVIE-N
During playback, press AUDIO repeatedly to hear a different audio
language, audio track or audio channel.
OR
During playback, press DISPLAY to display the playback menu.
Use v V to select the [Audio] option then use b B to select desired
audio language, audio track or audio channel.
Notes:
• Some discs allow you to change audio selections only via the disc
menu. If this is the case, press TITLE/POP-UP or DISC MENU button
and choose the appropriate audio from the selections on the disc menu.
• Immediately after you have switched sound, there may be a temporary
discrepancy between the display and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed
with [MultiCH] in the on-screen display.
Using the search menu
BD
DVD
AVCHD MOVIE
MOVIE-N
During playback, press SEARCH to display the search menu.
Press b B to skip the playback 15 seconds forward or backward.
Tip:
You can select a point that you want to skip by pressing and holding b / B
button.
Notes:
• This function may not work on some disc or titles.
• This function may not work on some [My media] content depending on
the file type and ability of the DLNA server.
Marker Search
BD
DVD
AVCHD MOVIE
MOVIE-N
To enter a Marker
You can start playback from up to nine memorized points. To enter a
marker, press MARKER at the desired point on the disc. The Marker icon
appears on the TV screen briefly. Repeat to enter up to nine markers.
To Recall or Clear a Marked Scene
Press SEARCH and the search menu appears on the screen.
Press a number button to select a marker number that you want to recall.
Playback starts from the marked scene.
OR
Press V to highlight a marker number. Use b / B to select a marked scene
that you want to recall or clear.
Press ENTER and playback starts from the marked scene. Press CLEAR
and the marked scene is erased from the search menu.
Notes:
• This function may not work on some disc or titles.
• All marked points are cleared if the title is in complete stop (x) mode,
the title is changed or if you unload the disc.
36
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 37
• If the total length of the title is less than 10 seconds, this function is not
available.
• This function may not work on some [My media] content depending on
the file type and ability of the DLNA server.
Enlarge the playback image
BD
DVD
AVCHD MOVIE
MOVIE-N
During playback or pause mode, press ZOOM to display the [Zoom] menu.
Use the green or yellow buttons to zoom in or out of the picture. You can
move through the zoomed picture using v V b B buttons.
To return to the normal picture size, press the yellow button repeatedly to
fully zoom out of the picture. Press RETURN to exit the [Zoom] menu.
Using coloured (A, B, C, D) Buttons
Screen Saver
The screen saver appears when you leave the player in Stop mode for
about five minutes. If the Screen Saver is displayed for five minutes, the
unit automatically turns itself off.
The screen saver also appears when you are playing music for about five
minutes, but the player will not be turned off.
Changing content list view
MOVIE
MOVIE-N
ACD
BD
third push
These buttons are available only during BD-J contents playback. Use the
appropriate buttons as indicated by the display. Depending on the disc
contents, the functions of each button may differ.
Viewing the Title menu or Popup menu
BD
DVD
Press TITLE/POP-UP to display the title menu or popup menu.
If the current DVD or BD-ROM disc has a menu, the Title menu or Popup
menu appears on the screen. Depending on the disc, the menu may not
be available.
Last Scene Memory
BD
MUSIC MUSIC-N
On the [Movie], [Music], [Photo] and [My Media] menu, you can change the
content list view by pressing DISPLAY repeatedly.
first push
DVD
This unit memorizes the last scene from the last disc that is viewed. The
last scene remains in memory even if you remove the disc from the unit or
switch off the unit. If you load a disc that has the scene memorized, the
scene is automatically recalled.
second push
Note:
The equalizer will disappear when you change the music contents list view.
Notes:
• Settings are stored in memory for use any time.
• This unit does not memorize settings of a disc if you switch off the unit
before commencing to play it.
• Last Scene Memory function for a previous disc is erased once a
different disc is played.
• This function may not work depending on the disc.
37
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 38
Adjusting the Picture Mode
BD
DVD
AVCHD MOVIE
MOVIE-N
Select the video quality mode during playback. You can adjust various
options such as [Contrast], [Brightness], [Sharpness], etc.
1. Press PIC MODE while playing a BD, DVD, movie file or Youtube
video. The [Picture Mode] menu appears on the screen.
2. Use b B to select the [User Setting] mode to enable video colour
setting options.
• Select [Standard] option to disable video colour setting options.
3. Use v V to select a desired option then use b B to adjust the value.
The other options will be disappeared for the picture setting. Press
ENTER to display the other options after adjusting.
• Select [Default] option then press ENTER to reset all of the video
adjustments.
4. Use v V b B to select [Close] or press RETURN to complete the
settings.
The settings below can be used to reduce the noise or to set the black
level of the video image on the screen. These filter settings can be
adjusted even if the picture mode is in [Standard] mode.
[Block NR] (Block Noise Reduction) – Set this option to [Low], [Mid]
or [High] to reduce the block noise, which may appear especially on
fast-moving pictures, produced in the MPEG compression process.
[Mosquito NR] (Mosquito Noise Reduction) – Set this option to
[Low], [Mid] or [High] to reduce the mosquito (scattering) noise
produced in the MPEG compression process.
[Black Level] – You can adjust the black level of the output signal.
Set this option [On] to display deeper, richer black than in [Off] setting.
Black Level control is only valid in composite output (VIDEO OUT).
38
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 39
Moving to another title/chapter
Displaying disc information
BD
ON REMOTE
1 Play the disc loaded on the unit:
N)
PLAY (N
2 Displays the playback menu:
DISPLAY
3 Selects an item:
vV
4 Adjusts the playback menu settings:
bB
5 Exit the disc playback menu:
DISPLAY
b
c
d
e
f
a
b
c
d
e
f
Title – Current title number/total number of titles.
Chapter – Current chapter number/total number of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Notes:
• If no button is pressed for a few seconds, the on-screen display
disappears.
• A title number cannot be selected on some discs.
• An item may not be available on some discs or titles.
• If BD interactive title is playing back, some setting information is
displayed on the screen but prohibited to be changed.
AVCHD MOVIE
Playing from selected time
BD
a
DVD
When a disc has more than one title/chapter, you can move to
another title/chapter.
Press DISPLAY during playback then use v / V to select the
[Title/Chapter] icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title/chapter number.
DVD
AVCHD MOVIE
MOVIE-N
Press DISPLAY during playback. The time search box shows the elapsed
playing time. Select the [Time] option and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a
scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press
ENTER. If you enter the wrong numbers, press CLEAR and enter the
correct numbers.
Notes:
• This function may not work on some disc or titles.
• This function may not work on some [My media] content depending on
the file type and ability of the DLNA server.
Watching from a different angle
BD
DVD
If the disc contains scenes recorded at different camera angles, you can
change to a different camera angle during playback.
During playback, press DISPLAY to display the playback menu. Use v V
to select the [Angle] option, then use b B to select desired angle.
39
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 40
Enjoying BD-LIVE™
ON REMOTE
1 Selects the [BD Storage Select] option
in the [Setup] menu:
HOME, v V b B
2 Check the network connection and settings:
See pages 20-23.
HOME, v V b B
3 Inserts a BD-ROM disc with BD-LIVE™
features:
OPEN/CLOSE (Z)
4 Selects a BD-LIVE™ features on the
disc menu:
v V b B, ENTER
This unit allows you to enjoy functions such as picture-in-picture,
secondary audio and Virtual packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard
Profile). Secondary video and audio can be played from a disc compatible
with the picture-in-picture function. For the playback method, refer to the
instructions in the disc. In addition to the BONUSVIEW function, BD-Video
supporting BD-Live (BD-ROM version 2 Profile 2) that has a network
extension function allows you to enjoy more functions such as online
games by connecting this unit to the Internet.
Enjoying BD-Live discs with Internet
This unit supports BD-Live, a new BD-Video function that allows you to use
the following interactive functions when connected to the Internet. (The
usable functions and the operating method may vary with each disc. For
details, refer to the instructions for the disc.)
– Additional contents such as movie’s trailer, subtitles and BD-J, etc. can
be downloaded to the USB device or built-in storage to play them.
Preparations:
• The unit must be connected to the Internet and set up to use the
BD-Live functions (see page 20-23).
• If you set the [BD Storage Select] option in the [Setup] menu to [USB
Storage], you should insert the USB device with more than 1GB free
space before using the BD-Live features.
• Although the player is correctly connected to the internet, the player can
not support the BD-Live features if selected BD storage does not have
40
sufficient free space. At that time, the warning messages may be
different depending on the discs.
• If free space of the internal-Flash Memory is insufficient, change the [BD
Storage Select] to [USB Storage] or format the internal Flash Memory
using [BD Storage Clear] option in the [Setup] menu.
Caution:
Do not extract the connected USB device while content is being
downloaded or a Blu-ray disc is still in the disc tray. Doing so may damage
the connected USB device and BD-Live features may not operate properly
with the damaged USB device anymore. If the connected USB device
seems damaged from such an action, you can format the connected USB
device from the PC and reuse it with this player.
Notes:
• Some BD-Live contents may be restrictively accessed in some
territories by contents provider’s own decision.
• It may take up to several minutes to load and start enjoying BD-Live
contents.
• Depending on a disc, the BD-Live function may not be operated if
[BD-LIVE connection] option is set to [Partially Permitted]. (See page 32)
• The connection to the Internet may take time or the Internet may not be
connected depending on the connection environment. It is required that
you use a broadband connection.
• Do not remove the USB device during operation. The USB device may
be damaged. Stop playback and turn off the menu beforehand.
Tip:
Special video data, etc. may be played back while they are being downloaded to a storage using one function of BD-Live. The playback may be
paused depending on the communication environment. Some functions
may be disabled to prevent skipping to sections that have not been downloaded, etc.
AACS Online
When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
Services and functions to be provided differ depending on the disc.
– You can be introduced to other similar movies if you record your
viewing history on the server by using these IDs.
– Game score histories can be saved.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 41
Movie file requirement (USB/DISC)
Playing a movie
Movie file compatibility with this player is limited as follows:
The player can play movie files on the disc/USB
device and video contents recorded on a
DVD-RW(VR mode) discs. Before playing movie
files, read “Movie file requirement” on page 41.
ON REMOTE
1 Inserts a disc/USB device containing
movie contents.
–
2 Displays the [Home Menu]:
HOME
3 Selects the [Movie] option:
b B, ENTER
4 Selects a movie from the [MOVIE] menu:
vV
5 Plays the selected movie:
PLAY
6 Stops the playback:
STOP
Notes:
• When the USB device is connected and a disc is inserted
simultaneously, the menu for selecting a media will appear.
Select a media then press ENTER.
• You can use various playback functions. Refer to pages 34-38.
• On the [MOVIE] menu, use red or blue button to move to the first or the
last file or track and green or yellow button to move to the previous or
next page.
• Unfinalized DVD VR format discs may not be played in this player.
• Some DVD-VR disc are made with CPRM data by DVD RECORDER.
This unit cannot support these kinds of discs.
What is CPRM?
CPRM is a copy protection system (with scramble system) only allowing
the recording of ‘copy once’ broadcast programs. CPRM stands for
Content Protection for Recordable Media.
Notice for displaying the DivX subtitle
If the subtitle does not display properly, press and hold SUBTITLE for
3 seconds during playback. The language code will appear.
Press SUBTITLE repeatedly to select another language code until the
subtitle is displayed properly and then press ENTER.
Available resolution size: 1920 x 1080 (W x H) pixels
File extensions: “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mp4”, “.mkv”
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub)
SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt),
DVD Subtitle System (.txt)
Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,
“DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, DIVX-HD,
MPEG1 SS, MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”,
“AC3”
Sampling frequency: between 32-48 kHz (WMA),
between 16-48 kHz (MP3)
Bit rate: between 20-320 kbps (WMA), between 32-320 kbps (MP3)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder:
Less than 2000 (total number of files and folders)
• The movie file name and subtitle are limited to 180 characters.
• Not all the WMA and AAC Audio format is compatible with this unit.
• HD movie files contained on the CD or USB 1.0/1.1 may not played
properly. BD, DVD or USB 2.0 are recommended to play back HD
movie files.
• This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1.
For a file with higher level, the warning message will be appeared on
the screen.
• This player does not support the file that are recorded with GMC*1 or
Qpel*2. Those are video encoding techniques in MPEG4 standard, like
DivX or XVID have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
41
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 42
Tips:
• To go directly to any track or file and play, enter the track/file number
using the numbered buttons (0-9).
Listening to music
The player can play Audio CDs and MP3/WMA
files. Before playing MP3/WMA files, read
“MP3/WMA audio file requirement” on page 42.
ON REMOTE
1 Inserts an Audio CD or a disc/USB Flash
Drive containing MP3/WMA files.
–
2 Displays the [Home Menu]:
HOME
3 Selects the [Music] option:
b B, ENTER
4 Selects a music from the [MUSIC] menu:
vVbB
5 Plays the selected music:
N)
PLAY (N
6 Stops the playback:
x)
STOP (x
• The playback may start automatically if the Audio CD inserted.
• Use v/V/b/B to select a folder then press ENTER and you can view the
files in the folder. If you want to move to the upper or lower
directory, use v/V to move to the desired directory.
• On the [MUSIC] menu, use red or blue button to move to the first or the
last file or track and green or yellow button to move to the previous or
next page.
• The equalizer indicator is not coupled with the music in play back.
• If there is impossible code to express in the file name, it may be
displayed as illegible.
MP3/WMA audio file requirement (USB/DISC)
File extensions: “.mp3”, “.wma”
Sampling frequency: between 8-48 kHz (WMA),
between 11-48 kHz (MP3)
Bit rate: between 8-320 kbps (WMA, MP3)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Example) MP3 files
Notes:
• When the USB device is connected and a disc is inserted
simultaneously, the menu for selecting a media will appear. Select a
media then press ENTER.
• You can use various playback functions. Refer to pages 34-38.
• The file name displayed in the [My Media] menu may differ from the file
name on the media server.
• Playback quality on the [My Media] menu is affected by the server’s
ability and condition.
42
Maximum Files/Folder:
Less than 2000 (total number of files and folders)
Notes on MP3/WMA file
• Depending on the size and number of the MP3/WMA files, it may take
several minutes to read the contents of the media.
• This unit cannot support the ID3 Tag embedded in the MP3 file.
• The total playback time indicated on the screen may not correct for
VBR files.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 43
Options during viewing a photo file in full screen
Viewing a photo
This unit can play a photo files. Before playing
photo files, read “Photo file requirement” on page
44.
ON REMOTE
1 Inserts a disc/USB device containing
photo files.
–
2 Displays the [Home Menu]:
HOME
3 Selects a [Photo] option:
b B, ENTER
4 Selects a photo from the [PHOTO] menu:
vVbB
5 Displays the selected photo in full screen:
ENTER
6 Displays the next or previous photo:
./>
7 Returns to the [PHOTO] menu screen:
x)
STOP (x
You can use various options during viewing a picture in full screen.
Use v V b B to select an option and use the options as described below.
Available options in the [PHOTO] menu and [My Media] menu are different
as shown below.
Options of [PHOTO] menu
a
b
c
d
e
f
g
h
Options of [My Media] menu
a
b
e
f
g
h
a Use b B to advance to the previous or next file.
b Press ENTER to start or pause the slide show.
Notes:
• When the USB device is connected and a disc is inserted
simultaneously, the menu for selecting a media will appear. Select a
media then press ENTER.
c Press ENTER to play or pause the background music. This option
is available after the background music is selected using
[Music Select] option. This option is not available on [My Media]
menu.
•
You can start the slide show by pressing PLAY (N) while photo file is
selected in the [PHOTO] or [My Media] menu.
•
On the [PHOTO] menu, use red or blue button to move to the first or
the last file and green or yellow button to move to the previous or next
page.
•
You can change the content list view by pressing DISPLAY repeatedly.
d Selects the background music.This option is not available on [My
Media] menu.
1) Press ENTER and the menu will appear.
2) Use v V b B to select a media or folder where there are music
file(s).
3) Press ENTER to confirm your selection.
e Press ENTER to rotate the picture clockwise.
This option is not available during slide show.
43
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 44
f Use green or yellow buttons to zoom in or out of the picture.
You can move through the zoomed picture using v V b B buttons.
Press RETURN to exit the [Zoom] menu and return to the normal
picture size.
• The zoom function can be operated by the ZOOM button on the
remote control.
g Use v V to select an option between [Effect] or [Delay].
Use b B to adjust and press ENTER to set the selected option.
[Effects] – You can apply various effects during a photo slide show.
OFF : Slide Show without any effect.
Random : Slide show effects are applied randomly.
Slide : Reveals a photo in a sliding motion from various
directions.
Door : Photo will be appear like door opening.
Lattice : Photo will be appear from tiled pieces to full screen
image
[Delay] – You can set the photo delaying time while Slide Show.
h Press ENTER to exit the option menu.
To access the menu again, press ENTER.
Tips:
• For the files that are contained in a disc or USB device, you can enter
the file number using the numbered buttons (0-9) to go directly to a
specific file.
•
You can advance to the previous or next file by pressing . or >
during viewing a photo file in full screen.
•
You can start the slide show without option menu by pressing
PLAY (N) during viewing a photo file in full screen.
•
Use v V b B to select a folder then press ENTER and you can view
the files in the folder. If you want to move to the upper or lower directory, use v V to move to the desired directory.
•
If there is a code that is impossible to express in the file name, it may
be displayed as illegible.
•
Depending on the DLNA server, the file name displayed on the screen
may differ from the original file name.
44
Listening to music during slide show in [My Media]
menu
You can view photos as a slide show while listening to music content on
[My Media] menu.
1. Press HOME and select [My Media] in the [Home Menu].
2. Select a server from the list and press ENTER to display the shared
folders from the server.
3. Select a music file from the menu and press PLAY (N) to play the
music.
4. Use v V b B to select a photo file from the menu and press ENTER
to display in full screen.
5. Select [SlideShow] option and press ENTER to start slide show.
Photo file requirement (USB/DISC)
File extensions: “.jpg”, “.jpeg”, “.png”
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000 (total number of files and
folders)
Notes on Photo file
• Progressive and lossless compression photo image files are not
supported.
• Depending on the size and number of the photo files, it may take
several minutes to read the contents of the media.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 45
About DLNA
Accessing DLNA servers
The player can browse and play movies, music
and photo stored on your DLNA Certified media
servers connected within your home network.
ON REMOTE
1 Check the network connection and settings:
See pages 20-23.
HOME, v V b B
2 Displays the [Home Menu]:
HOME
3 Selects a [My Media] option:
The player automatically scans and displays
DLNA servers within your local network.
v V b B , ENTER
4 Selects a DLNA server from the server list:
v V, ENTER
5 Selects a file from the list:
vVbB
6 Plays the selected file:
N)
PLAY (N
7 Stops the playback:
x)
STOP (x
8 Return to the server list menu:
SEARCH
Before accessing DLNA server:
• DLNA server and this player must be connected to the same
local area network.
• DLNA servers must be turned on.
• To play files on your computer, you must share folders on your
computer using Nero MediaHome 4 Essentials (page 46).
Note:
On the server list, a DLNA-compatiable digital media servers will be
appeared with the DLNA indicator as shown below:
This Player is a DLNA Certified digital media player that can display and
play movie, photo and music content from your DLNA-compatiable digital
media server (PC and Consumer Electronics).
The Digital Living Network Alliance (DLNA) is a cross-industry organization
of consumer electronics, computing industry and mobile device companies.
Digital Living provides consumers with easy sharing of digital media
through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with
the DLNA Interoperability Guidelines. This unit complies with DLNA
Interoperability Guidelines v1.5.
When a PC running DLNA server software or other DLNA compatible
device is connected to this player, some setting changes of software or
other devices may be required. Please refer to the operating instructions
for the software or device for more information.
About Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is a software for sharing movie, music and
photo files stored on your computer to this player as a DLNA-compatiable
digital media server.
Notes:
• The supplied Nero MediaHome 4 Essentials CD-ROM is a customized
software edition only for sharing files and folders to this player.
• The supplied Nero MediaHome 4 Essentials software does not support
following functions: Transcoding, Remote UI, TV control, Internet
services and Apple iTunes
• This manual explains operations with the English version of Nero
MediaHome 4 Essentials as examples. Follow the explanation referring
to the actual operations of your language version.
DLNA indicator
45
BD390-P-BSGPLLK-NEW-ENG
8/19/09
10:38 AM
Page 46
Installing Nero MediaHome 4 Essentials
Sharing files and folders
Before you install Nero MediaHome 4 Essentials, check the system
requirement shown below.
On your computer, you must share the folder containing movie, music
and/or photo content to play them using [My Media] features.
This part explains the procedure for selecting the shared folders on your
computer.
• Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service
Pack required), Windows® XP Media Centre Edition 2005 (Service
Pack 2 or higher), Windows Server® 2003
• Windows Vista® 64-bit edition (application runs in 32-bit mode)
• Hard drive space: 200 MB hard drive space for a typical installation of
Nero MediaHome stand-alone
• 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
• Memory: 256 MB RAM
• Graphics card with at least 32 MB video memory, minimum resolution
of 800 x 600 pixels, and 16-bit colour settings
• Windows® Internet Explorer® 6.0 or higher
• DirectX® 9.0c revision 30 (August 2006) or higher
• Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)
Start up your computer, and insert the Nero MediaHome 4 Essentials
CD-ROM into your computer’s CD-ROM drive. An installation wizard will
walk you through the quick and uncomplicated installation process. To
install Nero MediaHome 4 Essentials, proceed as follows:
1. Close all Microsoft Windows programs and exit any anti-virus software
that may be running.
2. Insert the Nero MediaHome 4 Essentials CD-ROM into your
computer’s CD-ROM drive.
3. Click [Nero MediaHome 4 Essentials]. The installation is prepared and
the installation wizard appears.
4. Click the [Next] button to display the serial number input screen.
Click [Next] to go to the next step.
5. If you accept all conditions, click [I accept the License Conditions]
check box and click [Next]. Installation is not possible without this
agreement.
6. Click [Typical] and click [Next]. The installation process is started.
7. If you want to take part in the anonymous collection of data, select the
check box and click the [Next] button.
8. Click the [Exit] button to complete the installation.
46
1. Double-click the “Nero MediaHome 4 Essentials” icon on the desktop.
2. Click [Network] icon on the left and define your network name in the
[Network name] field. The Network name you enter will be recognized
by your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder] window.
6. Select the folder containing the files you want to share. The selected
folder is added to the list of shared folders.
7. Click [Start Server] icon to start the server.
Notes:
• If the shared folders or files are not displayed on the player, click the
folder on the [Local Folders] tab and click [Rescan Folder] at the
[More] button.
• Visit www.nero.com for more information and software tools.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 47
Playing shared files from DLNA media server
On this player, you can display and play movie, photo and music
files stored on DLNA-compatiable digital media servers.
1. Start the DLNA-compatiable media server that connected on your
local area network.
2. Press HOME. The [Home Menu] appears on the screen.
3. Use v V b B to select [My Media] and press ENTER. The server list
appears on the screen.
4.
Use v V to select a server from the list and
press ENTER to display the shared folders
from the server.
Notes:
• Depending on the media server, this player may need to get the
permission from the server.
• If you want to re-scan available media server, press blue coloured
button.
5.
Use v V b B to navigate the
DLNA media server and select a
file you want to play.
On the [My Media] menu, use the
red or blue button to move to the
first or the last file/folder and the
green or yellow button to move to
the previous or next page
Notes on DLNA features
• Because the compatibility and available playback functions on the [My
Media] menu are tested on the bundle DLNA server (Nero MediaHome
4 Essentials) environment, file requirements and playback functions on
the [My Media] menu may differ depending on media servers.
• The file requirements on page 48 are not always compatible. There
may be some restrictions to the file features and media server's ability.
• If you press TITLE/POP-UP while a movie file is selected, The file
information is displayed on the screen. But, the information may not be
correct compared to the actual file features.
• The thumbnail of the unplayable files can be displayed in the
[My Media] menu, but those cannot be played on this player.
• If there is an unplayable music file in the [My Media] menu, the player
skips the file and plays the next file.
• The file information indicated on the screen may not correct for music
and movie files in [My Media] menu.
• Playing a movie subtitle files are only available on DLNA media server
created by supplied Nero MediaHome 4 Essentials software on this
player’s package.
• The subtitle file name and movie file name have to be the same and
located in the same folder.
• If subtitle files have been added after a directory has been indexed
already, the user has to remove and re-add the folder to the list of
shared media.
• The playback and operating quality of the [My Media] function may be
affected by your home network condition.
• The files from removable media such as USB drive, DVD-drive etc. on
your media server may not be shared properly.
6. Press ENTER or PLAY (N) to playback the selected content.
Note: You can use various playback functions. Refer to pages 41-44.
7. Press STOP (x ) to stop playback and go to the contents list menu.
47
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 48
File requirements
Overall
File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.mp3”, “.wma”, “.pcm” (LPCM)
• Available file extensions differ depending on the DLNA servers.
• The LPCM music are only available for files on DLNA servers.
Maximum Files/Folder: Less than 2000 (total number of files and
folders)
Music Files
Sampling frequency: between 8 - 48 kHz (WMA),
between 11 - 48 kHz (MP3), 44.1 and 48 kHz (LPCM)
Bit rate: between 8 - 320 kbps (WMA, MP3),
768Kbps and 1.536Mbps (LPCM)
Photo files
Recommended photo size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
Movie files
Available resolution size: 1920 x1080 (W x H) pixels
Playable subtitle : SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 1.0 (.sub), SubViewer 2.0
(.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)
• The subtitle files are not displayed on the [My Media] menu.
• Viewing internal subtitle is not available for mkv/mp4 file playback.
• If there are more than 1 subtitle file within a folder, displaying priority is
as follow:
Priority
High
file extension
“.smi”
Low
“.sub”
“.srt”
“.txt”
“.ssa”
Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,
“DIVX6.xx” (Standard playback only), DIVX-HD, MPEG1 SS, MPEG2
PS, MPEG2 TS
Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”,
Sampling frequency: between 32 - 48 kHz (WMA),
between 16 - 48 kHz (MP3)
48
Bit rate: between 20 - 320 kbps (WMA), between 32 - 320 kbps (MP3)
• The movie file and subtitle names are limited to 128 characters.
• Not all WMA and AAC Audio formats are compatible with this unit.
• This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1.
For a file with higher level, the warning message will be appeared on
the screen.
• This player does not support the file that are recorded with GMC*1 or
Qpel*2. Those are video encoding techniques in MPEG4 standard, like
DivX or XVID.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
BD390-P-BSGPLLK-NEW-ENG
8/19/09
10:38 AM
Page 49
Entering a network user ID and the password
Accessing your PC
The player can browse and play movie, music and
photo stored on your PC within your home
network.
ON REMOTE
1 Check the network connection and settings:
See pages 20-23.
HOME, v V b B
2 Displays the [Home Menu]:
HOME
3 Selects a [My Media] option:
The player automatically scans and displays
available PCs and shared folders.
v V b B , ENTER
4 Selects a shared folder from the server list:
v V, ENTER
5 Selects a file from the list:
vVbB
6 Plays the selected file:
N)
PLAY (N
7 Stops the playback:
x)
STOP (x
8 Return to the server list menu:
SEARCH
Available PCs on your
local area network
Shared folders on a PC
Note:
If your PC is protected by password, shared folder on your PC may not
displayed on the screen.
Before accessing your PC:
• Your PC and this player must be connected to the same local
area network.
• Note the Network User ID, password of your PC, if it is required.
• Your PC must be turned on.
• To play files on your computer, you must share folders on your
computer before accessing it.
Depending on your PC’s environment, you may need to enter a network
user ID and the password for accessing a shared folder.The keyboard
menu appears automatically if the network user ID and the password are
required. Use v V b B to select a character then press ENTER to confirm
your selection on the keyboard menu.
To enter a letter with an accent mark, select the letter from extended
character set.
Example: Select “D” and then press DISPLAY to display the extended
character set. Use b B to select “D” or “Ď” and then press ENTER.
[OK]: Searching related videos of search words.
[Clear]: Clear all entered characters.
[Space]: Inserts a space at the cursor position.
[Backspace]: Deletes the previous character at the cursor position.
[ABC / abc / #+-=&]: Change the keyboard menu settings to capital
letter, small letters or symbols.
When you finish entering the network user ID and password, select [OK]
and press ENTER to access the folder.
The network user ID and password will be remembered after accssing the
folder for your convenience. If you do not want the network user ID and
password to be remembered, press red cooured betton to un-tick the
[Remember] check box before accessing the folder.
Note:
Available languages to enter on the keyboard menu are as follows:
English, Spanish, Italian, French, German, Dutch, Portuguese, Swedish,
Polish and Czech.
49
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 50
Playing shared files from your PC
On this player, you can display and play movie, photo and music files
stored on your PC.
1. Start your PC that connected on your local area network.
2. On your PC, share folders which contains movie, music and/or photo
files you want to play on this player.
Note:
Sharing methods may vary depeding on your PC’s environment.
3. Press HOME. The [Home Menu] appears on the screen.
4. Use v V b B to select [My Media] and press ENTER. The server list
appears on the screen.
5.
Use v V to select a shared folder from the
list and press ENTER to display the shared
folders from the server.
Notes:
• If you want to re-scan available PCs and shared folders, press blue
colored button.
• Depending on your PC’s environment, you may need to enter a
network user ID and the password for accessing a shared folder
(page 49).
6.
50
Use v V b B to navigate the
folder and select a file you want to
play. On the [My Media] menu, use
red or blue button to move to the
first or the last file/folder and green
or yellow button to move to the
previous or next page
7. Press ENTER or PLAY (N) to playback the selected content.
Note:
• You can use various playback functions. Refer to pages 41-44.
• The file requirements for your PC’s share folder are described on
page 48.
8. Press STOP (x ) to stop playback and go to the file list menu.
Notes on PC features
• The thumbnail of the unplayable files can be displayed in the
[My Media] menu, but those cannot be played on this player.
• If there is an unplayable music file in the [My Media] menu, the player
skip the file and play next file.
• The subtitle file name and movie file name have to be the same and
located at the same folder.
• The playback and operating quality of the [My Media] function may
affected by your home network condition.
• The files on an removable media such as USB drive, DVD-drive etc. on
your PC may not be shared properly.
• You may experience connection problems depending on your PC’s
environment.
PC requirements
• Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service
Pack required)
• 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
• Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)
Note:
If you use Windows® XP or Windows Vista®, visit link below for more
information on file share settings.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 51
a Featured – The featured videos list will be displayed.
b Recent Videos – The most recently updated videos list will be
displayed.
c Most Viewed – The most viewed videos list will be displayed. The
period option appears at the bottom of the screen.
d Top Rated – The best rated videos list from YouTube server will be
displayed. The period option appears at the bottom of the screen.
e Search – The keyboard menu will be displayed.
See “Searching videos” on page 53 for more detail.
f History – The videos list that you previously played on this unit will
be displayed. Maximum of 25 videos can be stored.
g Favorites – This option will be appeared only when the unit is in
sign-in status. Displays the videos list that is arranged in the
YouTube server with your account.
Some videos may not appear on the [Favorites] list, even if the
videos are arranged in the server.
h Sign in (Sign Out) – Displays the keyboard menu to sign in or
returns to the sign-out status. See “Sign in with your YouTube
account” on page 53 for more details.
i Local site – Choose which country’s videos you would like to view.
The countries listed on the [Local Site] menu may different with
those listed on the YouTube web site.
Playing YouTube videos
ON REMOTE
1 Check the network connection and settings:
See pages 20-23.
HOME, v V b B,
ENTER
2 Displays the [Home Menu]:
HOME
3 Select the [YouTube] option:
v V b B, ENTER
4 Select a desired option on the YouTube
menu:
v V b B, ENTER
5 Select a video you want to play:
bB
6 Starts playback the selected video:
N), ENTER
PLAY (N
or DISPLAY
Network condition
YouTube menu
video list
period options
About the YouTube menu
Notes:
• The YouTube menu can display 5 videos in the videos list. Press red or
blue button to display next/previous 5 videos.
•
If you select the [Most Viewed] or [Top Rated] option in the YouTube
menu, the period options appear at the bottom of the screen. Use v V
b B to select a period option and press ENTER to display the videos
list within the selected period.
•
The videos list searched from the player may different with the list
searched from a web browser on PC.
There are various options on the YouTube menu. Use v V b B to select
an option and press ENTER to select the options as described below.
a
b
f
c
g
d
h
e
i
51
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 52
About YouTube playback screen
When you press PLAY (N) or ENTER at the video you want to watch, the
playback screen and content detail will appear on the screen.
content detail
playback
screen
progress bar
while playing
And when the playback ends or stops, the stopped playback screen and
related videos list appear on the screen. Use v V b B to select the current video or a video from the related videos list and then press PLAY (N)
or ENTER to play the selected video.
related videos
list
playback
screen
progress bar
When you press DISPLAY at the video you want to watch, the playback
starts in full screen.
playback
screen
progress bar
52
Playing a video
While watching a video from YouTube via your player, you can control the
YouTube video playback. You can use the buttons on the remote to pause
and resume viewing, just like when you watch a DVD. While playing a
video, the buttons on the remote do the following:
Button(s)
Operations
N or ENTER
Starts playback the video with content detail.
DISPLAY
Toggle between playback in full screen and playback
screen with content detail.
X
To pause a video while it is playing. To resume playing
a paused video, press PLAY (N) again.
x
Stops the video and displays related videos list.
./>
Skip the playback forward or backward .
HOME
When you have finished watching videos, simply press
the HOME button on the remote control to go to the
[Home Menu].
Notes:
• The settings of this player do not affect the YouTube’s playback quality.
while stopped
Full Screen
Press DISPLAY to toggle between playback in full screen and playback
screen with content detail.
•
The playback of YouTube videos may be paused, stopped or buffering
occurring often depending on your broadband speed.
We recommend a minimum connection speed of 1.5 Mbps. For the
best playback condition, a connection speed of 4.0 Mbps is required.
Sometimes your broadband speed varies based on your ISP’s network
conditions. Contact your ISP if you have problems maintaining a fast
connection that is reliable, or if you want to increase your connection
speed. Many ISPs offer a variety of broadband speed options.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 53
Searching videos
You can search for videos by entering search words of up to 128
characters. Use b B to select [Search] option from the menu and press
ENTER to display the keyboard menu. Use v V b B to select a character
then press ENTER to confirm your selection on the keyboard menu.
When you entering a character, maximum of 5 suggestion words will be
displayed.
To enter a letter with an accent mark, select the letter from extended
character set.
Example: Select “D” and then press DISPLAY to display the extended
character set. Use b B to select “D” or “Ď” and then press ENTER.
Use b B to select [Sign In] option from the menu and press ENTER to
display the keyboard menu. Use v V b B to select a character then press
ENTER to confirm your selection on the keyboard menu.
[OK]: Finish entering an ID or password.
[Clear]: Clear all entered characters.
[Space]: Inserts a space at the cursor position.
[Backspace]: Deletes the previous character at the cursor position.
[ABC / abc / #+-=&]: Change the keyboard menu settings to capital
letters, small letters or symbols.
If you want to sign out, select the [Sign Out] from the YouTube menu and
press ENTER.
[OK]: Searching related videos of search words.
[Clear]: Clear all entered characters.
[Space]: Inserts a space at the cursor position.
[Backspace]: Deletes the previous character at the cursor position.
[ABC / abc / #+-=&]: Change the keyboard menu settings to capital
letter, small letters or symbols.
This unit can automatically store up to 5 IDs which were previously
signed-in. The IDs list appears when you select the [Sign In] option.
Select a stored ID on the list and press ENTER to display the keyboard
menu with the selected ID is entered. You will then only need to enter the
password to sign in.
When you finish entering the search words, select [OK] and press ENTER
to display the related videos list.
Note:
Available languages to enter on the keyboard menu are as follows:
English, Spanish, Italian, French, German, Dutch, Portuguese, Swedish,
Polish and Czech.
Sign in with your YouTube account
To watch videos from your [Favorites] video list on the YouTube server with
your account, you need to sign in with your YouTube account.
[New ID]: Displays the keyboard menu for entering a new ID and
password.
[X]: Delete the stored ID as shown left of the [X] symbol.
53
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 54
Reference
Setting up the remote to control your TV
Controlling a TV with the Supplied Remote Control
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate manufacturer
code.
You can control the volume, input source, and power state of your TV with
the supplied Remote Control.
You can control your TV using the buttons below.
While holding down TV POWER button, and press the manufacturer code
for your TV with the numerical buttons (see the table below).
Release the TV POWER button to complete setting.
Manufacturer
LG
TV Control
Buttons
TV POWER
Zenith
You can
TV POWER
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source between the
TV and other input sources.
u
PR/CH U/u
Scan up or down through memorized
channels.
VOL +/–
Adjust the volume of the TV.
MUTE
Temporarily turns TV sound OFF, press
again to restore.
Note:
Depending on the unit being connected, you may not be able to control
your TV using some of the buttons.
54
1 (Default), 2
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
By pressing
Code Number
4
Depending on your TV, some or all buttons may not function on the TV,
even after entering the correct manufacturer code. When you replace the
batteries of the remote, the code number you have set may be reset to the
default setting. Set the appropriate code number again.
Resetting the unit
If you observe any of the following symptoms.
• The unit is plugged in, but the power will not turn on or off.
• The front panel display is not working.
• The unit is not operating normally.
You can reset the unit as follows.
• Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
• Unplug the power cord, wait at least five seconds, and then plug it in
again.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 55
Language Codes
Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
55
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 56
Troubleshooting
Symptom
Possible Cause
Correction
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet securely.
The power is on, but the
player does not work.
• No disc is inserted.
• Insert a disc. (Check the disc indicator in the display
window is lit.)
No picture.
• The TV is not set to receive video signal output.
• Select the appropriate video input mode on the TV.
• The video cable is not connected securely.
• Connect the video cable securely.
• The selected resolution is not capable with your TV.
• Select another resolution using RESOLUTION button.
• The equipment connected with the audio cable is not
set to receive disc signal output.
• Select the correct input mode of the audio receiver so you
can listen to the sound from the player.
• The power of the equipment connected with the audio
cable is turned off.
• Turn on the equipment connected with the audio cable.
• The [AUDIO] options are set to the wrong position.
• Set the [AUDIO] options to the correct position
(see pages 29-30).
• The player is in reverse play, fast forward, slow motion
or pause mode.
• Return to the normal playback.
• The disc is upside down.
• Insert the disc with the playback side down.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type and regional
code.)
• The rating level is set.
• Change the rating level.
• The disc was recorded on another unit and was not
finalized.
• Finalize the disc on that unit.
• The Remote Control is not pointed at the remote
sensor on the player.
• Point the Remote Control at the remote sensor of the
player.
• The Remote Control is too far from the player.
• Operate the Remote Control closer to the player.
No sound.
The player does not start
playback.
The Remote Control does
not work properly.
56
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 57
Troubleshooting
Possible Cause
Symptom
Correction
• The internal Flash Memory does not have enough
space.
• Change the [BD Storage Select] to [USB Storage] or format the internal Flash Memory using [BD Storage Clear]
option in the [Setup] menu.
• Internet connection is not established.
• Ensure that the unit is correctly connected to the local area
network and can access the internet (see pages 20-23).
• Your broadband speed is not fast enough to use the
BD-Live features.
• Contact your Internet Service Provider (ISP) and increase
the broadband speed is recommended.
• The [BD-LIVE connection] option in the [Setup] menu
is set to [Prohibited].
• Set the [BD-LIVE connection] option to [Permitted].
Streaming video services
(such as YouTube, etc.)
often stop or "buffer" during
playback.
• Your broadband service speed may not be fast
enough to stream video services (such as YouTube,
etc.)
• Contact your Internet Service Provider (ISP) and increase
the broadband speed is recommended.
The YouTube ID is not
automatically stored in the
ID list.
• The ID list is full.
• Delete one of the stored IDs and sign in with the ID again.
Shared folder or files from
the media server are not
displayed on the [My Media]
menu.
• The firewall or anti-virus software on your media server
is running.
• Turn off the firewall or anti-virus software running on your
media server.
• The folders or files have been added or removed after
a directory has been indexed already.
• Rescan the shared folder on your media server.
The shared files from DLNA
media server are not played
on the [My Media] menu.
• Shared file is not playable on the player.
• See “File requirement” on page 48.
BD-Live feature does not
work.
57
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 58
Specifications
General
System
Power requirements:
AC 110-240 V, 50/60 Hz
Power consumption:
21W
Laser:
Semiconductor laser,
wavelength: 405nm / 650 nm
Dimensions (W x H x D):
Approx. 430 x 58 x 277 mm without foot
Signal system:
Standard PAL/NTSC colour TV system
Net Weight (Approx.):
3 kg
Frequency response:
Operating temperature:
5 °C to 35 °C
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Operating humidity:
5 % to 90 %
Signal-to-noise ratio:
More than 100 dB
(ANALOG OUT connectors only)
Harmonic distortion:
Less than 0.008%
Dynamic range:
More than 95 dB
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Wireless LAN:
(internal antenna)
Integrated IEEE 802.11n (Draft 2.0)
wireless networking access, compatible
with 802.11b/g Wi-Fi networks.
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A)
Accessories
ANALOG AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1
MULTI CHANNEL OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack x 8
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL OUT (OPTICAL):
3 V (p-p), Optical jack x 1
58
Video cable (1), Audio cable (1), Remote control (1), Battery (1),
Nero MediaHome 4 Essentials software CD-ROM (1)
Customer Support
You can update the Player using the latest software to enhance the
products operation and/or add new features.
To obtain the latest software for this player (if updates have been made),
please visit http://lgservice.com or contact LG Electronics customer care
centre.
Design and specifications are subject to change without notice.
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 59
IMPORTANT INFORMATION RELATING TO
NETWORK SERVICES
PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS
SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS.
Use of the Network Services requires an Internet connection which is sold
separately and for which you are solely responsible. The Network Services
may be limited or restricted depending upon the quality, capabilities and
technical limitations of your Internet service.
The Network Services belong to third parties and may be protected by
copyright, patent, trademark and/or other intellectual property laws. The
Network Services are provided solely for your personal and noncommercial
use. Unless expressly authorized by the respective content owner or
service provider, you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in any
manner or medium any content or services accessible through this
product.
LG IS NOT RESPONSIBLE FOR YOUR USE OF THE NETWORK
SERVICES. THE NETWORK SERVICES ARE PROVIDED "AS IS." TO
THE FULLEST EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WHATSOEVER
(i) FOR THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR
COMPLETENESS OF ANY NETWORK SERVICE MADE AVAILABLE
THROUGH THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS THAT MAY
INFECT, HARM, OR CAUSE DAMAGE TO THIS PRODUCT, YOUR
COMPUTER, TELEVISION, OTHER EQUIPMENT, OR ANY OTHER
PROPERTY. LG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY,
WHETHER IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE,
SHALL LG BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR ATTORNEY FEES OR
EXPENSES RELATING TO OR ARISING OUT OF THE NETWORK
SERVICES EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or interrupted at any time, and
LG makes no representation or warranty that any Network Service will
remain available for any period of time. Use of the Network Services may
be subject to additional terms and conditions of the respective third party
service provider. The Network Services are transmitted by third parties by
means of networks and transmission facilities over which LG has no
control. LG EXPRESSLY DISCLAIMS ANY RESPONSIBILITY OR
LIABILITY FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for customer service related to
the Network Services. Any question or request should be made directly to
the respective Network Service providers.
"Network Service(s)" means the third party services accessible through this
product including but not limited to all data, software, links, messages,
video and other content found thereon or used in connection therewith.
"LG" means LG Electronics, Inc. its parent company and all of their
respective subsidiaries, affiliates and related companies worldwide.
59
BD390-P-BSGPLLK-NEW-ENG
8/17/09
3:42 PM
Page 60
Open source software notice
The following GPL executables and LGPL libraries used in this product are
subject to the GPL2.0/LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, dhcpcd, mtd-utils,
net-tools, procps, sysutils, tinylogin, Samba-3.0.25b
• libcurl library : Copyright © 1996 - 2008, Daniel Stenberg,
daniel@haxx.se
• boost C++ library : © Copyright Beman Dawes 1999-2003
• UPnP SDK : Copyright © 2000-2003 Intel Corporation
• Libnet : © 1998 - 2004 Mike D. Schiffman mike@infonexus.com
• Libpcap
This product includes other open source software.
LGPL LIBRARIES: uClibc, DirectFB, iconv, cairo, gnutls, libcrypt, libgpgerr, libusb
gSOAP Public License 1.3 LIBRARY: gsoap
LG Electronics offers to provide source code to you on CD-ROM for a
charge covering the cost of performing such distribution, such as the cost
of media, shipping and handling upon e-mail request to LG Electronics at:
opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG Electronics.
You can obtain a copy of the GPL, LGPL licenses from
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
Also you can obtain a copy of gSOAP public license from
http://www.cs.fsu.edu/~engelen/license.html.
This software is based in part on the work of the Independent JPEG Group
copyright © 1991 - 1998, Thomas G. Lane.
This product includes
• Freetype library : copyright © 2003 The FreeType Project
(www.freetype.org).
• libpng library : copyright © 2004 Glenn Randers-Pehrson
• Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
• Expat library : copyright © 2006 expat maintainers.
• OpenSSL library :
– cryptographic software written by Eric Young (eay@cryptsoft.com).
– software written by Tim Hudson (tjh@cryptsoft.com).
– software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl.org)
60
•
•
•
•
•
•
•
•
•
Copyright © David L. Mills 1992-2006
Copyright © 1998-2003 Daniel Veillard.
Copyright © 1998, 1999 Thai Open Source Software Centre Ltd.
Copyright © 1990 The Regents of the University of California.
Copyright © 1998-2005 The OpenSSL Project.
Copyright © 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl>
Copyright © 1993 Branko Lankester <branko@hacktic.nl>
Copyright © 1993 Ulrich Pegelow <pegelow@moorea.uni-muenster.de>
Copyright © 1995, 1996 Michael Elizabeth Chastain
<mec@duracef.shout.net>
• Copyright © 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com>
• Copyright © 1999,2000 Wichert Akkerman <wakkerma@debian.org
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
Download PDF

advertising