DVD PLAYER OWNER'S MANUAL MODEL : DM6944P Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. Safety Precautions WARNING NOTES ON COPYRIGHTS: It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, a risk of electric shock to persons. SERIAL NUMBER: The serial number is found The exclamation point is intended to alert the important operating within user an equilateral triangle to the presence of and maintenance instructions in the literature (servicing) accompanying the product. SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in a confined space similar unit. CAUTION: This To Digital ensure manual Video Disc proper carefully use Player employs of this Laser product, please System. read this owner's and retain for future reference should the unit require maintenance, contact (see service procedure). an Use of or controls, adjustments, other than those a specified authorized service location the performance of procedures herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, 2 apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or the back of unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC on this unit. This number is ___________________________________ ___________________________________ to Table of Contents Programmed Playback Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 RearPanel................................8 with Video CD andAudioCD............................19 Programmed Playback with Video CD andAudioCD..........................19 .19 RepeatProgrammedTracks/All. .19 ErasingaTrackfromProgramList. .19 ErasingtheCompleteProgramList. OperationwithMP3Disc....................20 PlayinganMP3Disc.....................20 . . . . . . . . . . . . . . . . . . . Pause.............................20 MovingtoanotherTrack................20 RepeatTrack/All/Off...................20 NotesonMP3Discs.....................20 Preparation ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation Language..........................12 OperationwithJPEGDisc...................21 ViewingaJPEGdisc.....................21 MovingtoanotherFile.................21 RepeatAll/Off.......................21 22 Programmed Playback with MP3 or JPEG Disc Programmed Playback with MP3 or JPEG Disc 22 22 Repeat Programmed Tracks/All/Off. .22 RepeatProgrammedAll/Off. 22 Erasing a Track/File from Program List .22 ErasingtheCompleteProgramList. Picture.............................12 AdditionalInformation......................23 Connections............................9-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound.............................13 LastConditionMemory...................23 Others............................13 ScreenSaver...........................23 ParentalControl......................14 VideoModeSetting......................23 SystemSelect..........................23 ControllingtheTV.......................23 Operation Operation with DVD, Video CD and Audio CD 15-18 .15 PlayingaDVD,VideoCDandAudioCD. 15 Exchanging discs during playback Skippingdiscs.......................15 15 Exchanging the disc and starting playback Troubleshooting..........................24 SpeakerSettings..........................25 LanguageCodeList.......................26 GeneralFeatures........................16 AreaCodeList............................27 MovingtoanotherTITLE...............16 16 Moving to another CHAPTER/TRACK Still Picture and Frame-by-Frame Playback 16 Specifications............................28 . . . . . . . . . . . . . . . . . . . . Reference . . About the Pause.............................16 symbols SlowMotion.........................16 Indicates hazards Search.............................16 itself or for instructions likely to cause damage. harm to the unit other material Random...........................16 Repeat............................17 RepeatA-B.........................17 TimeSearch........................17 Selecting the sound enhancement . . . . . . . Indicates special operating Indicates tips and hints for features of this unit. making the task easier. 17 Zoom..............................17 MarkerSearch.......................18 SpecialDVDFeatures....................18 TitleMenu..........................18 DiscMenu..........................18 CameraAngle.......................18 .18 ChangingtheAudioLanguage. .18 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................18 3 INTRODUC Before Use Disc-related terms Discs Playable Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD Chapter (DVD only) Sections of a picture (8cm/12cmdisc) In addition, this unit can play a titles, MP3 SVCD, CD-R or or CD-RW JPEG files. on the conditions of the the CD-R/RW disc or itself, recording equip- some CD-R/RW -- -- This unit Track that do not con- Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Scene use shaped or Notes CDs heart- irregularly shaped (e.g., octagonal). It may result in malfunctions. on piece that are smaller On a all discs. CD and audio CD picture or a only) piece on a video CD assigned a track number, musical audio CD. Each track is or an enabling (the on (Video tain any data, or contain different kinds of formatted data other than MP3 and CD-DA data. Do not musical composed of one or several chapters. Each assigned a chapter number, enabling you to the chapter you want. Chapter numbers may not Sections of discs cannot be -- played on this unit. cannot play CD-R/RW discs or a is chapter Notes ment enabling easily. A title is be recorded Depending feature content than titles. locate -- accompanying or additional feature content, or music album. Each title is assigned a title reference number Video CD that contains audio (DVD only) DVD Video you to locate the track you want. video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs Some playback operations of DVDs and Video CDs may intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playbe back features of the unit may not be functions may be added. Refer also to the instructions available, supplied or other Types There with the DVDs two types of video CDs: Video CDs PBC and Video CDs. Some DVDs made for business purposes may not be playable on this unit. of video CDs are equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the system via menus, search functions, typical computer-like operations. Moreover, of high resolution can be played if they are or still other pictures included in the disc. code of the DVD player and DVDs 3 player is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "3" or "ALL". If you try to play any other discs, the message "Check Regional Regional This DVD Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback Note To avoid is prohibited by on area limits. DTS-encoded CDs possible damage to the audio system, turn down the volume before playing back such discs. Adjust the volume gradually to personal preference. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the player. 4 Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Cont'd) Precautions Storing After Handling the unit discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, the unit after removing the disc. To near use volatile contact the unit for To liquids, such as the unit. Do not allow rubber marks radio, and turn off temperature build- discs Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure ter out. plastic products to They will leave of time. the surface. on move long period a insecticide spray, or the unit When you move the player, take out any discs. If you don't, the discs may be damaged or drop into the internal Cleaning considerable a car. the exterior surfaces clean keep Do not or there may be as up inside the workings Cleaning of the DVD player. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older the unit About vinyl records. Symbols To clean the cabinet Use a use a soft, dry cloth. If the surfaces soft cloth solution. Do not benzine, or lightly use thinner, are moistened with a extremely dirty, mild detergent strong solvents, such as these as might damage alcohol, the surface About the " symbol display " may appear on the TV This icon means the function of the unit. manual is not available To obtain About the disc a clear picture player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. The DVD Notes on When a software DVD VCD2.0 Do not touch the get on section in this manual includes the following represented by to the that icon. DVD Video CDs with the PBC (playback control) Video CDs without the PBC (playback control) function. discs Hold the disc for instructions function. CD Handling symbols icons, the data provided herein is applicable only VCD1.1 Discs on during operation. explained in this owner's that specific DVD video disc. screen playback side of the disc. by the edges so that fingerprints Audio CDs. MP3 MP3 disc. JPEG JPEG disc. will not the surface. Do not stick paper or tape on the disc. 5 INTRODUC Front Panel and Display Window POWER Switches the player ON and OFF. Opens red when the is in player Standby mode ( closes the disc tray. ) STOP(9) Stops playback. STANDBY indicator Lights / OPEN/CLOSE or (off). Remote Sensor Point the DVD Display Disc a remote control here. window Shows the current status of the Insert Player player. Tray disc here. DISC SKIP Moves to the next available disc tray. PLAY(2) playback. Starts DISC EX-CHANGE Changes a disc (other than the one playing) during playback PAUSE(;) playback temporarily / frame-by-frame playback. Pauses press repeatedly for Reverse SKIP/SCAN Go to beginning of current chapter/track or to PREVIOUS Press and hold for two seconds for a fast (Q /S) chapter/track. reverse search. Forward SKIP/SCAN Go to NEXT Press and hold for two seconds for ANGLE Lights when multi angles A TITLE DVD Indicates current title number CHP/TRK will appear if a disc is in the The current disc tray flashes. light tray. fast forward search. are present. disc a ( T/R ) chapter/track. Indicates current Indicates total DVD inserted PROG. CD Audio CD inserted chapter or track number playing time/elapsed Programmed playback VCD Video CD inserted RANDOM MP3 playback MP3 disc inserted RANDOM player function: Indicates Playback, Pause, etc. mode CD DVD 1 234 6 5 TITLE CHP/TRK PROG. active active Indicates current MP3 VCD time RANDOM ALL AB repeat Remote Control DVD/TV select button Selects OPEN/CLOSE mode of remote operational Player - ON and OFF. POWER OPEN/CLOSE - display DVD 2 - 4 3 (left/right/up/down) Selects - an item in the DISPLAY RETURN changes menu on a TV AV SELECT volume of TV. ENTER VOL Removes the the Displays setup INTRODUC menu. of menu video CD a - Selects AUX A/V channel. input VOL MENU SELECT/ENTER TITLE Acknowledges PR./CH DVD disc. turns off TV sound. with PBC. PR./CH MENU Accesses - menu Selects channel of TV and during playback. RETURN/TV AV TV SOUND/MUTE - 1 Selects 3D SURROUND disc DISPLAY Accesses On-Screen tray. SOUND/MUTE POWER Switches DVD and closes the disc Opens control. SLOW PAUSE/STEP STOP selection. menu SLOW TITLE ReverseSLOW(,)? Reverse slow playback. SKIP/SCAN PLAY available. PAUSE/STEP ( ; ) playback temporarily/ press repeatedly for frame-by-frame playback. ? PROGRAM ? Pauses ? REPEAT A-B RANDOM ZOOM MARKER SEARCH DISC SKIP Selects audio an Selects a subtitle a DVD camera angle Accesses setup or removes Marks any MARKER SEARCH Moves to the next available disc Remote Control Removes if ? ? Angle: remote menu. program a track number on the REPEAT ? ? sequence. RANDOM Plays ? tracks in random order. ZOOM Enlarges ? tray. Remote control sensor AAA AAA from the front of the sensor. About 30° in each direction of the front of the battery video image. installation Detach the battery the remote control, and insert cover on (size AAA) batteries aligned correctly. and press all. A-B Repeat ? the buttons. (7 m) or removes Repeat chapter, track, title, ? Point the remote control at the remote remote track. program menu or a mark on the MARKER SEARCH menu. ? Operation Range Distance: About 23 ft or CLEAR menu. DISC SKIP ) ? point during playback. SEARCH Displays S PROGRAM menu. MARKER ( Press and hold button for about Accesses available SETUP ) chapter two seconds. ? language. ANGLE Selects * language (DVD) or (CD). SUBTITLE Reverse SKIP/SCAN previous chapter a menu. audio channel an T Search backward*/ go to beginning of current chapter or track or go to 0-9 number buttons AUDIO ( ?PLAY(2) Starts playback. AUDIO SUBTITLE ANGLE SETUP ForwardSLOW(.)? Forward slow playback. Forward SKIP/SCAN Search forward*/ go to next or track. CLEAR STOP(9)? Stops playback. Selects numbered items in the discs Title menu, if Displays SKIP/SCAN with the rear of two R03 and Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). sensor. 7 Rear Panel OPTICAL (Digital audio out jack) digital (optical) audio equipment. Connect to COAXIAL (Digital audio out jack) digital (coaxial) audio equipment. Connect to 5.1 CHANNEL AUDIO OUT Connect to -- -- -- -- center a 5.1 channel receiver speaker connection subwoofer connection front rear speakers connections (surround) speakers connections ANALOG AUDIO OUT Connect to an amplifier, (Left/Right) receiver or stereo system. AC Power Cord Plug into the power source. VIDEO OUT Connect to a TV with video inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT Connect to a TV with Y Pb Pr (Y Pb Pr) inputs. S-VIDEO OUT Connect to a TV with S-Video inputs. VIDEO OUTPUT Switch Select either S-VIDEO OUT depending on or COMPONENT VIDEO OUT/PROGRESSIVE how you connected the DVD Player SCAN, to the TV. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 8 Connections Tips Depending on resolution Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the best connections. reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment. amplifier, receiver, stereo or See "Connecting to optional equipment" on -- -- Player is connected directly to the TV. Select the TV to the corresponding video input. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (Turntable) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD system. Make to a TV possible. PROGRESSIVE SCAN jacks on the DVD Player corresponding in jacks on the TV using an optional Y Pb Pr cable (C). 2 to Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the supplied audio cables. the DVD TV Notes -- Set the Progressive to "On" on the setup menu for progressive signal, see page 12. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). Rear of TV of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks, set the VIDEO OUTPUT switch to COMPONENT. When using the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to one "digital ready" the -- Connecting or Connect the COMPONENT VIDEO OUT/ 1 page 10. Caution Make high-definition connection If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. System For better sound a pro) television, you may take advantage of the DVD Player's progressive scan output for the highest video described below. AUDIO OUT (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections -- Scan Progressive S-VIDEO COMPONENT VIDEO / PROGRESSIVE SCAN INPUT INPUT Pr Pb VIDEO INPUT AUDIO INPUT Y L R L S-VIDEO. Video connection 1 2 (Good) Connect the VIDEO OUT the video in jack supplied (V). on to C A V (Better) Connect the S-VIDEO OUT to the S-Video in jack (S). Connect the Left and the DVD TV on jack the TV Right Player (A) using the supplied on the DVD using the Player supplied AUDIO OUT to the audio left/right in jacks of jacks on the audio cables. Component Video (Color Stream ) connection (Best) Rear of DVD player Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD Player corresponding in jacks on the TV using an optional Y Pb Pr cable (C). to the 2 S Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the supplied audio cables. S-Video cable 1 Player Connect the Left and S-Video connection 2 the DVD the video cable the DVD TV 1 jack on using the TV Connect the Left and the DVD TV Right AUDIO OUT Player to the audio left/right in (A) using the supplied audio cables. jacks of jacks on the Note If the TV has an S-video input, connect the DVD player using an S-video cable, yellow video cable. with the S-video cable. When do not connect the 9 INTRODUC Connections Connecting to (Cont'd) Optional Equipment Notes -- Connecting to an amplifier equipped with channel analog stereo or Dolby Surround Connect the Left and two digital output does not match capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound can only be obtained if your receiver is equipped with a Digital the jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A). Right If the audio format of the AUDIO OUT -- Multi-channel surround sound decoder. -- To confirm the audio format of the current DVD selection Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 or DTS) Connect 1 of the DVD one jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. You will need to activate the connection to a multi-channel A/V receiver with 6 Channel connectors Audio Output" player's digital output. page 13). on multi-channel connection digital quality. provides the best For this you need a multi-channel Audio/Video receiver that supports one or more of the supported by your DVD Player (MPEG 2, DTS). Check the receiver manual and and Dolby Digital the logos on the front of the receiver. ing player of a does not digital perform DTS sound track. To multi channel DTS surround, you compatible audio Connect the CENTER and WOOFER jacks for the speaker and the Subwoofer (C) to the corresponding in jacks on your receiver. 1 Center 2 (F) 3 to the internal corresponding Make the enjoy (2 channel) one Right REAR speaker jacks (R) jacks on your receiver. in appropriate Sound settings for Analog Speaker Settings in the setup menu. and See page 13. DTS must connect this receiver via decod- Right FRONT speaker jacks corresponding in jacks on your receiver. Connect the Left and to the 4 Output Note This Player contains a multi-channel decoder. This playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder. enables Connect the Left and sound audio formats of this player player's to Rear of DVD player outputs. Rear of DVD player F O X OPTICAL COAXIAL DIGITAL INPUT Amplifier (Receiver) 10 (Dolby Digital) This DVD Multi-channel sound Digital a button may allow you to select between various audio formats available on the disc. Analog DIGITAL AUDIO Player's display, press AUDIO. Repeated pressing of the AUDIO OUT 2 (See "Digital A -- C R A L Center Subwoofer Front R Rear R Front L Rear L R ANALOG 5.1CH AUDIO INPUT AUDIO INPUT Amplifier (Receiver) Before Operation Before using the remote control, press the DVD button to select the device to be General mode Icons Repeat Caution: or TV Repeat TITLE operated. CHAPT Explanation TRACK Title Repeat Chapter Repeat Track and Audio CD This manual gives basic instructions for operating the Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. On-Screen General screen. playback status On-screen can Press to select 3 or 4 an The selected item will be 3 The number buttons numbers Repeat A-B OFF Repeat Off Resume Action play PREATION Video CDs (non-PBC only) from this prohibited or Video CDs point not available or 2 to (e.g., Notes during playback. 2 Press 1 AB displayed on the TV changed on the menu. be (non-PBC only) All Discs and Audio CD Video CDs display operation Press DISPLAY 1 Repeat ALL be can Current Disc and Audio CD Display Some items Repeat DISC DVD (non-PBC only) change title can Some discs may not provide all of the features included on the on-screen display example shown below. item. If no button is pressed display disappears. highlighted. the setting of For some press SELECT/ENTER to execute the seconds, the on-screen item. an be also be used for number). for 10 setting functions, setting. DVD Items Function (Press 3/4 to select desired item) Title Number 1/3 Chapter Number 1/12 Time search 0:16:57 Audio language Digital Audio Output mode 1 ENG and Subtitle D 6CH language OFF Displays the current title number and total number of available titles, and Displays the current available chapters, Displays the searches a skips to chapter skips and a desired title number. number and total number of to a desired chapter number. elapsed playing time, and point identified by its elapsed time. 1/1 Sound NORM. VCD1.1 Displays the current subtitles language, changes you make to the setting. 1/2 and Displays the current angle number and total number of angles, and any changes you make to the angle number. 1/2 Displays the current sound mode, and changes you make to the setting. 1/2 Function (Press 3/4 to select desired item) Track Number 1/4 Audio Channel Sound Numbers, SELECT/ENTER CD Items Time 1/2,or Numbers, SELECT/ENTER 1/2 any VCD2.0 1/2,or Numbers, SELECT/ENTER Displays the current audio soundtrack language, encoding method and channel number, and any changes you make to the setting. any Angle Selection Method 0:16:57 STER. NORM. Displays the current track and PBC On Displays the mode, and number, total number of tracks skips to the desired track number. elapsed playing time (Display only) Selection Method 1/2,or Numbers, SELECT/ENTER -- Displays the audio channel, and changes you make to the audio channel. 1/2 Displays the current sound mode, and changes you make to the setting. 1/2 any 11 Before Initial You Operation (Cont'd) install your can Picture Settings TV Personal Preferences. own Aspect DVD 4:3 Letterbox: Select when Initial General Settings Operation nected. 1 The setup 4:3 Panscan: Select when menu appears. Both Displays pictures cropped to side of the original picture may Original English Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Chinese Rating Code Aspect Menu Language Progressive 5.1 Scan Audio Digital 16:9 Wide: Select when Polish Country Hungarian TV Russian Menu Other------------ Progressive Output Speaker Setup Others Press 3/4 to select the desired item. screen 3 4 5 will item, display well as the current as alternate 5.1 setting for setting(s). the While the desired item is displayed, press 2, desired setting. then 3/4 to select the Press SELECT/ENTER to confirm your selection. require additional steps. Some items Press SETUP, RETURN PLAY to exit the or setup menu. If you press SETUP or RETURN to exit the menu, DVD Player will be in stop mode. must press PLAY to play back. setup So, you conscreen. 16:9 wide TV is connected. a Code Aspect Language Digital selected fill your TV be cut off. con- bars masking standard 4:3 TV is nected. Disc Subtitle TV The a with Disc Audio Country 2 standard 4:3 TV is images picture. above and below the Press SETUP. a theatrical Displays Audio Scan Output Speaker Setup Others Progressive Scan DVD provides the highest quality picflickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Progressive Scan Video tures with less Language Disc Audio Off Disc Subtitle On Disc Menu Disc Language Select language a DVD Rating for the disc's Country Menu, Audio and Subtitle. TV original language included on the disc is selected. language, enter the 4-digit number corresponding to the language code list on page 26. If you enter the wrong language code, press CLEAR. Original Other : : The Disc Audio Original Disc Subtitle English Disc Menu French Rating German Code Country TV Aspect Menu Digital 5.1 Scan Audio Output Speaker Setup see you language setup Others Note Scan only works when the VIDEO OUTPUT Italian switch is set to COMPONENT/PROGRESSIVE SCAN and Polish System Hungarian set to mode is set to NTSC or AUTO. Also if System mode is AUTO, Progressive Scan only works during DVD of NTSC system is playing back Russian . menu. when you press SETUP. Chinese Disc Subtitle English Rating Country Code Aspect Menu Language This is the menu Once the setting for progressive scan output is entered, an image only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. will Disc Audio Disc Menu 12 Output Speaker Setup Caution for the TV 5.1 Scan Audio Progressive Language a Digital Spanish Other------------ Others Menu Language Progressive Chinese Language Progressive Select Menu To select another Code Aspect Before Operation (Cont'd) Sound Digital Others Audio Output The DRC, Vocal and PBC settings can be changed. Each DVD disc may have a variety of audio output options. Set the player's Digital Audio Output according Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is to the changed type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connect the DVD Player's DIGITAL OUT jack to Dolby Digital decoder (or an amplifier or other equipment with a between On and Off. a Dolby Digital decoder). or with DTS a a Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM Digital Progressive Output Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation thanks to digital audio technology. However, a quietest ones). Then, you may listen to a movie losing clarity of sound. Set lower volume without DRC to On for this effect. 96KHz Scan Audio Digital 5.1 Dynamic Range at 48 KHz Language Audio Speaker Setup you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds Sample Freq. Aspect Scan Others and the Code Language Progressive possible, /PCM Rating Country PREATION Code Aspect Menu 2 channel digital player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Menu PBC On 5.1 The DVD TV Disc Menu Country decoder, Dolby Digital decoder PCM: Select when connected to amplifier. Vocal On TV MPEG decoder. stereo DRC On Disc Subtitle Rating Stream/PCM: Select "Stream/PCM" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment Disc Audio Output Vocal Speaker Setup Others Set Vocal to On is Sample Frequency playing. only when a multi-channel karaoke DVD The karaoke channels on the disc will mix into normal stereo sound. To change the Sample Frequency setting, first select the Digital Audio Output as indicated above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz sigdesired nals to 48KHz your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is so PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. made, this unit will pass all signals through without conversion, or processing. down 5.1 Speaker settings DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 25.) Disc Audio Disc Subtitle R R Disc Menu Rating Front L Country TV Code Aspect Menu Digital 5.1 Size Language Progressive Volume Scan Audio Output Delay 0dB Small ms Test Return Speaker Setup Others 13 Before Operation (Cont'd) Parental Control Rating Movies DVDs may contain on scenes not suitable for applies scenes on to the 8, and alternatively, able for selection complete the disc. These more on some suitable discs. disc or scenes are "Area Code to Disc Subtitle avail- Rating are Country TV 8 7 Disc Menu 6 Rating 5 Country TV Code Menu Menu Audio Digital 5.1 Output Unlock Change Others 1 2 3 Select "Rating" and buttons. 4 While "Rating" on is the Setup displayed, menu using the 3 press 2. When you have not entered a password yet; Install a 4-digit password using the number buttons to create a personal 4-digit security password, setup When you have already entered a password; Install your 4-digit password using the number buttons to confirm the 2 3 4 5 6 personal 4-digit security then press SELECT/ENTER. using the 3/4 buttons on the menu. While Area Code is Follow 3 of step selected, press 2. "Rating" Select the first character Shift the using cursor the second character left. on using the 3/4 buttons. 1/2 buttons and select using 3/4 buttons. Press SELECT/ENTER to confirm your area selection, then press SETUP to exit the code menu. then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. password, Select Area Code 1 1 Speaker Setup Output Speaker Setup Others 2 Scan Scan Audio Digital 3 Language Progressive Language Progressive 4 Aspect Code Aspect 5.1 Disc Subtitle US Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list Code Set Disc Audio The Parental Control feature allows country-dependent. disc, referring List", page 27.). rated from scenes are Ratings (See whose standards country/area a used to rate the DVD video Therefore, discs may contain Parental Control information that 1 to DVD Enter the code of DVD children. certain Area Code Note Confirmation of your 4-digit password is necessary when the password is changed (see "Changing the 4-digit password" Changing the ). 4-digit password If you make a mistake before pressing SELECT/ENTER, press CLEAR and install your 4-digit security password 1 Follow 2 again. 3 Install your old Select Change Steps below 1-2 as shown above to the left (Rating). code, then press SELECT/ENTER. using the 3/4 buttons then press SELECT/ENTER. 4 Select rating from 1 to 8 using the 3/4 but(1) has the least playback restrictions. Eight (8) has the most playback restrictions. a 4 tons. One Unlock: If you select Unlock, Parental Control is not active. The disc will play without restrictions. Ratings played. Higher unless new 4-digit password, then press 5 Install exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the an rated alternative scenes scene will not be is available The alternative must have the menu. same on rating If you forget 4-digit password your played If you the disc. word, follow the procedure below. or a forget your password, to clear the current pass- 1 Press SETUP to suitable alternative is found, playback will stop. You must enter your 4-digit password or change the rating level in order to play the 2 Use the Number buttons to enter the disc. 3 lower one. If no Press SELECT/ENTER to confirm your 5 selection, 14 time and veri- 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be Install the SELECT/ENTER. then press SETUP to exit the rating menu. display the setup menu. 6-digit number "210499." The 4-digit password Enter a new code is cleared. as shown above to the left (Rating). Operation Playing with DVD, Video CD and Audio CD DVD, Video CD and Audio CD a Exchanging discs during playback Press DISC EX-CHANGE Playback Setup Turn on the 1 2 VCD1.1 the TV and select the video corresponding Audio VCD2.0 DVD to the DVD system: Turn input source source desired player. the audio on input one system and select connected to the DVD tray. Do not load left and Center side position. a double-sided DVD is inserted, make Press OPEN/CLOSE to close the READING appears -- automatically. The disc pressing or -- tray. -- the TV screen, and playback If playback does not start, If there is or when is playback no pressed, the disc tray rotates and beginning of the next disc. on the next disc tray, the following from the disc When DISC SKIP is pressed during playback 5, playback of disc 1 will menu screen is back is displayed loading the disc and 4 buttons to select the and additional selections you want, then press SELECT/ENTER to start playback. MENU to return to the disc or during playback or when play- and the disc that 2. title/chapter starting playback stopped. Exchange the disc. 3. Press OPEN/CLOSE 3 of disc start. Play stops (if pressed during playback), the disc tray opens was in the play position comes to the front. a DVD Press TITLE can tray will be selected. Exchanging may appear instead. menu may be displayed first after Video CD that contains a menu. Use the 1 2 play position When DISC SKIP is disc menu screen DVD loaded in the during play 1. Press OPEN/CLOSE a or discs playback begins on press PLAY. In some cases, the disc If by Notes sure DISC SKIP to rotate the carousel. starts to the stopped. the side you want to play is facing up. ? Discs can be loaded one at a time by 3 tray presently exchanged. Press DISC SKIP position When The disc Skipping disc in the a light position. trays The carousel will rotate clockwise disc increments. not be with the position, panel during Note -- Load your disc in the center label facing up. the front Exchange the discs and press DISC EX-CHANGE OPEN/CLOSE to close the disc tray. player. Press OPEN/CLOSE to open the disc on to open the disc tray. Press DISC SKIP to rotate the disc playback CD or PLAY again. The tray closes and playback begins (with the disc that was in front). menu screen. VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the disc Menu setting and the exact the disc operating procedures for depending on the disc. may differ Follow the instructions on each using menu menu screen. menu screen. You also may set PBC to Off under 13. setup. See page Notes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized "Parental Control", on page 14). DVDs may have a region code. Your player will not play discs that have (see -- -- different from your player is 3 (three). player. The region a region code code for this 15 PREATION with Operation DVD, Video CD and Audio CD (Cont'd) General Features Slow Motion 1 Press SLOW t Note The Unless stated otherwise, all operations described use When disc has a another title as more than follows: to select Moving playback is stopped. a title disc has title number. chapter/track as 1/3 one more than track, you one chapter can move or a to another follows: or > briefly during playback to chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select C (chapter) (or for a Video CD and Audio CD, select T for track). Then, enter the chapter/track number using the numbered buttons (0-9). select the next Search now player press the buttons in Random ing can will ? RANDOM1: Plays order and then RANDOM2: repeatedly on the remote by press- 2 To return to all the tracks on a single disc in random stops. Plays all the tracks plays on current disc in all the tracks on each suc- stops. Plays 2 tracks randomly from a disc and then randomly from a different disc until all tracks have been played. 2 To return to normal Tip By pressing playback, press RANDOM disappears on the display window. SKIP . or > during Random back, the unit selects another title (track) and until play- resumes playback. Note This function works during playback. playback, again. PAUSE/STEP CD 2 tracks all discs Random CD VCD1.1 disc in random order and then RANDOM3: during playback. now 1 Press PAUSE/STEP 16 mode, press PLAY. Karaoke DVD "RANDOM" control. Pause go into SEARCH mode. during playback or in stop mode. automatically begins Random Playback and "RANDOM (1-3)" appears on the TV screen. ceeding VCD1.1 PAUSE/STEP > for about or The unit on go into PAUSE mode. advance the picture frame by frame player CD 1 Press RANDOM rapid Frame-by-frame playback 1 Press PAUSE/STEP 2 You will 3 To exit SEARCH plays VCD2.0 a or > repeatedly required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD and Audio CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). ? Still Picture and VCD1.1 The random order and then succession. The VCD2.0 DVD during playback. ? two-digit numbers, is not available from reverse two seconds Note DVD in 2 Press and hold SKIP/SCAN . Press SKIP . For playback to select the disc has than Slow motion 1 Press and hold SKIP/SCAN . 1/12 CD on a more T From the to another CHAPTER/TRACK VCD1.1 DVD When a or Note select to can function, press the appropriate numbered button (0-9) required speed: 1/3 DVD title, you T to select the or 1/16, t 1/8, t 1/4 or t 1/2 (reverse), 1/16, T 1/8, T 1/4 or T 1/2 (forward). To exit slow motion mode, press PLAY. Video CD. Press DISPLAY when title one during playback. t 3 to another TITLE T or VCD1.1 will enter SLOW mode. player 2 Use the SLOW t the remote control. Some features may also be available from the Setup menu. Moving VCD2.0 DVD press PLAY or press only with Compact Discs, discs and video CD without PBC. Karaoke DVD, Video CD and Audio CD (Cont'd) with Operation General Features Repeat VCD2.0 DVD CHAPT VCD1.1 Time Search CD DISC TRACK TITLE (cont'd) ALL 1 To Repeat Chapter/Title/Off play repeat the chapter currently playing, press REPEAT. The 2 To - Repeat Chapter icon appears on the TV repeat the title currently playing, press REPEAT icon appears on the TV Repeat mode, press REPEAT repeatedly Repeat Off icon appears on the TV screen. 1 To until Repeat Track/Disc/All/Off repeat the track currently playing, press REPEAT. The 2 To - Repeat Track repeat icon appears the disc the TV on screen. press REPEAT currently playing, two times. The 2 Within 10 3 Within 10 the 3 To Disc icon appears on the TV seconds, press 3/4 three times. The All icon appears Repeat on the TV time of the to select the Time display. on-screen seconds, use the number buttons to enter start time. Enter required 4 Within 10 right seconds, press SELECT/ENTER starts from the selected time Playback invalid on sec- to confirm the the disc. If you enter time, playback will continue from the current point. 3D Surround screen. DVD Repeat mode, press REPEAT repeatedly until the Repeat Off icon appears on the TV screen. hours, minutes and in the box. start time. screen. of entire all disc contents, press REPEAT Repeat elapsed playing If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. an Repeat dis- screen. The Time Search box shows the onds from left to Video CDs and Audio CDs on-screen at The "-:--:--" appears in the Time Search box. screen. 3 To cancel the the Search icon in the Repeat Title The during playback. on appears playing current disc. screen. two times. The -:--:-- The Time Search function allows you to start any elapsed time location on the disc. OFF 1 Press DISPLAY DVD Video Discs 0:16:57 DVD VCD NORM. CD 3D SUR 4 To cancel This unit produce can a 3D Surround simulates multi-channel audio Note OnaVideoCDwithPBC,youmustsetPBCtoOffon the setup menu to use the Repeat function. See page 13. If you press SKIP . twice SKIP > Repeat Chapter/Track playback, the during repeat playback cancels. speakers, instead of the speakers normally required to listen to five more multi- channel audio from 2 Press 3 3 Press 1 option or home theater A-B A* To repeat during playback. will be sequence in a briefly 2 Press A-B RPT A-B appears on title: again starting point. screen. at your chosen end point. the TV screen, and the repeat sequence appears on the player's display). briefly begins (a-b repeat the TV on 3 To cancel the sequence, press A-B RPT. 2 to to select "3D SUR". DVD VCD2.0 effect, select "NORM". VCD1.1 The Zoom function allows you to expand the video image and to move the focus point of zoomed image. 1 Press ZOOM during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1/2/3/4 buttons to the zoomed the level magnification move the focus point off image. 3 Press CLEAR to Note If you press SKIP . or > the A-B sequence are cleared. option. highlighted. CD Zoom 1 Press A-B RPT at your chosen A- appears VCD1.1 OFF AB a VCD2.0 DVD or system. 4 to select the sound or The sound a To turn off the 3D Surround Repeat from two conventional stereo 1 Press DISPLAY or effect, which playback resume normal playback or return to paused image. during repeat A-B, Notes The zoom The zoom function may not work for function may not work on some DVDs. multi-angle scenes. 17 OPERATION Operation with DVD, Video CD and Audio CD (Cont'd) General Features Marker Search (cont'd) VCD2.0 DVD VCD1.1 CD discs: Menus 1/9 can nine start points To enter 1 playback can from memorized to point. Up During disc playback, press MARKER at the location you want to memorize. The Marker icon will appear 2 a be memorized. mark, follow these steps. a on the TV screen 1 to enter up to nine Marker Repeat step DVD the contents of DVD Video Checking MARKER SEARCH You DVD Features Special briefly. points disc. on a DVDs may contain menus that allow you to access special features. To access the disc menu, press MENU. Then, press the appropriate number button to select option. Or, use the 1/2/3/4 buttons to highlight your selection, then press SELECT/ENTER. an DVD Title Menu 1 Press TITLE. To Recall 1 a Marked Scene disc During playback, The MARKER SEARCH If the current title has screen. press SEARCH. menu will appear on 2 Within 10 seconds, press 1/2 to select ber that you want to recall. a the screen. Marker 2 The 3 To list menu can and subtitle num- a menu, that Otherwise, the disc remove menu menu will appear on the may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. 3 Press SELECT/ENTER. will start from the Marked Playback 4 To remove SEARCH. To clear 1 During The disc disc playback, The MARKER SEARCH to is menu displayed. menu will appear on the screen. erase. Camera Angle If the disc contains DVD scenes to Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 5 To 2 and 3 to erase additional Marker numbers. remove The number of the current Changing All disc markers the disc is pressed. recorded at different a different camera angle camera appears on the a display. the MARKER SEARCH menu, press SEARCH. Note off, 1/1 angles, you change angle during playback. Press ANGLE repeatedly during playback to select desired angle. can 3 again. press SEARCH. Press 1/2 to select the Marker number that you want 2 1 Press MENU. 2 To exit the disc menu, press MENU Marked Scene a DVD Disc Menu scene. the MARKER SEARCH menu, press 1 cleared when the power is turned removed, or DISC SKIP button is are the Audio Language DVD ENG D 6CH Press AUDIO repeatedly during playback to hear different languages or audio tracks available on the disc. audio Changing VCD the Audio Channel CD Press AUDIO LEFT STER. RIGHT repeatedly during playback to hear a (STEREO, LEFT or RIGHT). dif- ferent audio channel Subtitles DVD 1 ENG Press SUBTITLE different subtitle repeatedly during playback to view languages available on the disc. Note the If 18 appears, the feature is not available on the disc. Programmed Playback Programmed Playback with Video CD and Audio CD with Video CD and Audio CD Repeat Programmed 1 To repeat the track currently playing, press REPEAT. The Note On a Video CD with setup menu to must set PBC to Off PBC, you the use on the function. See page 13. Program 2 To Tracks/All Repeat Track icon appears repeat all tracks on on the TV the program screen. list, press REPEAT two times. The Repeat All icon appears on the TV screen. 3 To cancel 1 2 Insert a Video CD or Audio CD and close the tray. Press PROGRAM while The Program menu playback is stopped. will appear. Program Step Repeat mode, press REPEAT repeatedly until the Repeat Off icon appears on the TV screen. Note If you press SKIP . twice or SKIP > during Repeat Track playback, the repeat playback cancels. 1 To 1 resume normal playback from programmed playback Press PROGRAM until "PROG." indicator the Clear All display Erasing Note Press PROGRAM or RETURN to exit the Enter the disc number Program The Enter the track number The next area can be are Program menu stopped. will appear. erase 3 Press CLEAR. Erasing the Program Complete Program 1 Press PROGRAM while list. menu playback is List stopped. will appear. All", then press SELECT/ENTER. The menu. stored in the player memory and programmed sequence. playback of all programmed pleted, playback is stopped Program 2 Use 1/2/3/4 to select "Clear programmed. with the first playback List is 2 Use 1/2/3/4 to select the track that you wish to from the Program list. The Press PLAY to exit the The selected tracks in the numerical 3 to 4. to 20 tracks After using Program The track will be erased from the is selected. playback begins 7 keys and then press SELECT/ENTER. Repeat steps 6 the numerical and then press SELECT/ENTER. 4 keys (0-9) 5 Up using Track from 1 Press PROGRAM while menu. 3 (1-5) a disappears window. tracks is complete Program The programs are for the disc will be erased. also cleared when the disc is removed. com- 19 OPERATION with MP3 Disc Operation Playing The DVD MP3 disc an Player CD-ROM, CD-R Before play can or a recordings read the notes on mark appear. Press PROGRAM to mark. MP3 E the disappear If you press SKIP . twice or SKIP > during Repeat Track playback, the repeat playback cancels. disc and close the The MP3/JPEG choice on E The REPEAT button is not available when the CD-RW discs. MP3 Insert Note MP3 formatted playing recordings, Recordings on right. 11 MP3 tray. menu appears on the TV Notes on MP3 Discs screen. About MP3 MP3 An MP3 file is audio data JPEG MPEG1 audio files that have 2 Press 3/4 to select the MP3 then press SELECT/ENTER. The The MP3 The player has a menu appears on MP3 the TV player compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". can not read extension other than screen. Program can not read file extension MP3 file that has an file a ".mp3". a non MP3 encoded file that ".mp3". TRACK 1.MP3 TRACK 2.MP3 MP3 Disc TRACK 3.MP3 TRACK 4.MP3 TRACK 5.MP3 OFF 1 3. MP3 Press 3/4 to select 3 Playback 4. menu track then press PLAY. a starts. During playback, the current track's elapsed playing time will appear on the display. Playback will stop at the end of the disc. Press TITLE to 4 at any other - A single MP3 7. Press SKIP . or > or 8. MP3 9. to return to the of the current track. Press SKIP . twice briefly to step back to the pre- vious track. Repeat 1 To 2 To File using CD-RW discs. only. names should be named using 8 letters must incorporate ".mp3" extension Please e.g. "********.MP3". Do not use special letters such as or less "_?!><+*}{`[@ etc. Total number of files on the disc should be less than 200. 10. Use 74 minute CD-R discs minute CD-R This DVD (700M) (650M), Do not use 80 software player requires discs/recordings to meet certain technical standards in order to achieve Track/All/Off playback quality. MP3 Repeat Track icon appears repeat all tracks on a Pre-recorded DVDs set to these standards. There repeat the track currently playing, press REPEAT. The cannot finished CD-R discs ]:;\/.," during playback to beginning once advance to the next track track, it We do not recommend and during playback. To return to playback, press PLAY or press PAUSE/STEP again. to another Track MP3 files in the first MP3 file in the 1st one. 1 Press PAUSE/STEP Moving no system. requires MP3 files. If you wish to playback MP3 format all the data in the disc or use a new files, time, press STOP. use 2 ISO9660 file session disc playback 6. Pause an track. If there is move stop playback follows: creates 5. to he next page. Press MENU to move to the previous page. To is limit- Sampling Frequency / only at 44.1kHz Bit rate / within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD Creator", which 2. 56:35 player 1. Clear All TRACK 8.MP3 with this as TRACK 6.MP3 TRACK 7.MP3 compatibility ed on the menu screen. disc, press REPEAT two are are optimal automatically many different types of recordable disc formats (including CD-R containing MP3 files). That require certain pre-existing conditions (see above) to insure compatible playback. times. The Repeat 3 To cancel the All icon appears on the Customers should also note that menu screen. Repeat mode, press REPEAT repeatedly Repeat Off icon appears on the menu screen. until required is from the Internet. Our company cannot grant such permission. Permission should always be sought from the 20 permission in order to download MP3 files and music copyright owner. with JPEG Disc Operation Viewing This DVD JPEG disc a Player can Make sure mega pixels (2M). play Moving JPEG discs with JPEG files on to another File Press SKIP . it. the resolution of the JPEG files is less than 2 or > advance to the next file once during viewing to previous file. to the or Repeat All/Off Notes 1 To upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on-screen Depending display after several minutes, some of the files are too reduce the resolution of the JPEG files to less big than 2 mega pixels and burn another disc. --- Total number of files on the disc should be less than The menu Repeat on a disc, press REPEAT when appears. All icon appears 2 Press PLAY or on the menu screen. SELECT/ENTER to start repeat play- back. 3 To cancel playback Repeat mode, first press STOP to stop then press REPEAT when JPEG menu appears. 200. The Some disc may be incompatible due to different recording format or condition of disc. 11 repeat all files JPEG Insert a disc and close the The MP3/JPEG choice appears Off icon appears on the menu screen. Note The REPEAT button is not available when the tray. menu Repeat on appear. Press PROGRAM to the TV disappear the E E mark mark. screen. MP3 JPEG 2 Press 3/4 to select the JPEG then press SELECT/ENTER. The JPEG menu appears on the TV screen. Press RETURN to move to the previous menu (MP3/JPEG choice menu). JPEG Program Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg Clear All Picture8.jpg 1/31 OFF Slide JPEG Speed Fast menu If you want to view a particular file, press 3/4 to a file and press SELECT/ENTER or PLAY. 3 highlight Viewing the file proceeding starts. During viewing a file, press DISPLAY or RETURN to move to the previous menu (JPEG menu). Press TITLE to Press MENU to move move to the next page. to the previous page. Tip There are three viewing Slide Speed options: Fast, highlight the Slide select the option you want Normal, and Slow. Press 1/2 Speed then press 3/4 to to to use, and press SELECT/ENTER. 4 To stop viewing The JPEG menu at any other time, press STOP. appears. 21 OPERATION with MP3 Programmed Playback Programmed Playback with JPEG Disc MP3 MP3 or JPEG Disc or Note The JPEG tracks/files programmed power is turned off Program allows you to store (or files) for a particular disc Program 1 disc and close the a The MP3/JPEG choice 1 To appears on 2 To the TV Repeat Track The MP3 Repeat 3 To cancel JPEG the Press 3/4 to select the MP3 JPEG then press or SELECT/ENTER. The MP3 JPEG menu appears Press RETURN to move to the or (MP3/JPEG choice on the TV previous Press PROGRAM in the screen. on the All icon appears menu screen. list, press stop mode to enter the on the menu screen. Repeat mode, press REPEAT repeatedly until Repeat Off icon appears the on menu screen. Note If you press SKIP . twice or SKIP > during Repeat Track playback, the repeat playback cancels. or during Program Edit 1 To repeat all files when JPEG The mark will appear to the right of the word side of the menu screen. Program Repeat on menu the program or list, press REPEAT appears. All icon appears 2 Press PLAY JPEG All/Off Repeat Programmed mode. The the on the program on menu menu). 3 playback (MP3 only) E icon appears repeat all tracks REPEAT two times. screen. 2 MP3 Tracks/All/Off repeat the track currently playing, press REPEAT. The tray. menu cleared when the are the disc is removed. Repeat Programmed contain 60 tracks/files. can Insert your favorite tracks/files in the player memory. or on the menu screen. SELECT/ENTER to start repeat play- back. right 3 To cancel Repeat mode, first press STOP to stop playback then press REPEAT when JPEG menu appears. Note Press PROGRAM to exit the E the mark will Edit Program mode; Note disappear. E The REPEAT button is not available when the 4 Press 3/4 to select track/file then press SELECT/ENTER to place the selected track/file the on 5 Program a list. Repeat step 4 to place the Program list. appear. Press PROGRAM to Erasing additional tracks/files on Program mode to enter the JPEG E Program TRACK 1.MP3 TRACK 8.MP3 Picture1.jpg Picture1.jpg TRACK 2.MP3 TRACK 2.MP3 Picture2.jpg Picture8.jpg TRACK 3.MP3 TRACK 4.MP3 Picture3.jpg Picture3.jpg TRACK 4.MP3 TRACK 3.MP3 Picture4.jpg Picture6.jpg TRACK 5.MP3 Picture5.jpg Picture7.jpg TRACK 6.MP3 Picture6.jpg TRACK 7.MP3 ed 7 1/31 OFF JPEG menu Slide Speed Fast Press MENU to 2 Press 2 to in programmed only displayed.) stop mode (when is move to the Program move move to the next page. to the 8 Playback begins previous or page. PLAY to start. in the order in which you programmed the tracks/files and "PROG." appears in the display window. Playback stops after playing the last programmed track/file the program list. list. 3 Use 3/4 to select the track/file that you wish to from the Program list. erase 4 Press CLEAR. Erasing the 1 Follow steps Program Press SELECT/ENTER The 1-2 of List" as "Erasing To resume are a list. List Track/File from above. complete Program The programs Program Complete Program 2 Use 3/4 to select "Clear All", then press SELECT/ENTER. for the disc will be erased. also cleared when the disc is removed. normal playback from programmed playback Press and hold PROGRAM for 3 seconds until "PROG." indicator 22 be highlight- playing. Press TITLE to on can The track/file will be erased from the track/files you selected last is the program list. Press 3/4 to select the track/file you want to start stop mark will appear. menu screen menu programmed on List in the during playback Program Edit mode. or Note JPEG Press 2. The Program mark. E Clear All Picture8.jpg OFF 1 MP3 6 E the mark Picture7.jpg Clear All TRACK 8.MP3 56:35 Track/File from 1 Press PROGRAM The MP3 a disappear E disappears in the display window. Additional Information Last Condition DVD This player Controlling Memory VCD1.1 CD Your remote control is memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its settings memothe latest stop position is automatically recalled. player. rized, player well as capable of your DVD operating limited functions of LG TV. operate for your LG TV. Before using the remote control, press the DVD TV button to select the device to be operated. 1 To switch the remote control mode Notes -- as Follow the instructions below to ferent -- the TV be device), sure (to operate to press the DVD or or a dif- TV but- ton first. Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing playback. 2 The POWER, CH(4/3), VOL (1/2), MUTE and TV AV buttons ate the on remote control are used to oper- LG TV. Screen Saver A image appears when you leave the DVD mode for about five minutes. screen saver in Player stop Setting Remote Control Codes for LG TV This remote control supports two remote control After the Screen Saver has been for about five codes for LG TV: Code 1 and Code 2. minutes, the DVD Player will turn itself off. Code 1 is for LG TV with NTSC engaged automatically Code 2 is for LG TV with PAL Video Mode With certain ering or means Setting DVD VCD2.0 VCD1.1 discs, the playback picture may be flick- interpolation on or straight lines. That De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. To change the video mode, press and hold DISPLAY about 3 seconds playback. The displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. new system. from the factory, the remote during To set the remote control to Code 2, hold down both the TV button and "2" number button on the remote control. (If the batteries in the remote control are replaced while the remote control is set to Code 2, the setting will revert Code 1.) To set the remote control back to Code 1, hold down both the TV button and "1" number button on the remote control. disc video mode number selected is Video mode change MODE1 → MODE2 MODE5 → MODE1 → sequence: MODE3 → MODE4 → If you turn off the power, the video mode will return to initial default state (MODE1). System Note If the remote control does not TV, try one of the other code originally supplied Due to the variety COMPANY cannot will operate your particular or use the remote control with the LG TV. of codes used by manufacturer, OUR guarantee that the remote control operate every model of the LG TV. Select You must select the TV shipped multi control is set to Code 1. Dot Crawl is shown Vertical When the unit is or system. appropriate system mode for your a system(PAL, NTSC, or AUTO), system. To select press and hold PAUSE for more than 3 second when NO DISC appears in the display window. ? When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. PAL: Select when DVD player is connected with PAL- player is connected with player is connected with Multi TV. NTSC: Select when DVD NTSC-TV. AUTO: Select when DVD system TV. 23 OPERATION Troubleshooting Check the following guide for the possible cause of a before problem Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert a window is The TV is not set to receive DVD picture. signal output. No sound. on that the DVD or, the TV appropriate video input mode the picture from the DVD so the TV on appears screen. Connect the video cable into the securely. securely. The connected TV power is turned off. Turn The Select the correct equipment connected with the signal output. The audio cables are not connected audio receiver Turn the on equipment jacks connected with the audio cable. Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The disc is mode of the so Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. is set to the input you can listen to the sound from the DVD player. securely. Digital Audio Output position. jacks the TV. on securely. The is display The video cable is not connected audio cable is not set to receive DVD playback picture (Check lit.) Select the player The disc. cord into the wall outlet audio CD indicator in the not work. No service. contacting Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert a playable disc. (Check the disc type, color system and Regional code.) The disc is down. placed upside Place the disc with the playback side down. The disc is not placed within the guide. Place the disc inside the The disc is dirty. The level is set. Rating The remote control is not does not work remote properly. sensor Cancel the pointed player. at the of the DVD player. There is an obstacle in the rating tray correctly path of the player. Rating function or change level. Point the remote control at the remote sensor The remote control is too far from the DVD the disc Clean the disc. the The remote control on guide. of the DVD Operate the 23ft(7m). player. remote control within about Remove the obstacle. remote control and the DVD The batteries in the remote control exhausted. 24 are Replace the batteries with new ones. Speaker Settings Make the following settings for the built-in 5.1 channel Delay surround decoder. Press 1 / 2 to customize the sound to confirm to the acoustics of your room by adding a delay effect to the Center Speaker and Rear (Surround) Speakers. Disc Audio Disc Subtitle R R Disc Menu Rating Volume Code Country TV Aspect Menu When 5.1 Channel Surround is played, you can enjoy the best sound if the distance between you and each speaker is the same. You can set the Delay time in Front L 0dB Size Small Delay Language ms Test Digital 5.1 Audio Output the Center/Rear Return Others Select "5.1 1 tons 2 on Speaker Setup" using the While "5.1 (Surround) Speakers the sound to the acoustics of your Speaker Setup setup to customize room. the 3/4 but(A) L menu. R C Speaker Setup" is selected, press 2 DC DF button. SW Press 1/2 buttons to select the desired 3 Adjust options by using 4 Speaker Select speaker. DS SL 3/4/1/2 buttons. SR (B) selection speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer) a ers Note Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Setting the delay (Center Speaker) equal to or longer than the DF the below figure, set the mode as 0ms. Otherwise, change the setting according to the table below. (A)=DF-DC Distance of (A)(cm) Setting(ms) If the distance of DC is Volume Press 1 / 2 to adjust the output speaker. (-10dB 0dB) level of the selected ~ Size Setting Press 1 / 2 to set a mode. (Large, Small or 1 68 2 102 3 136 4 170 5 the delay (Rear (Surround) Speaker) equal to the distance of DS in above, set the mode as 0ms. Otherwise, change the setting according to the table below. (B)=DF-DS Distance of (B)(cm) Setting(ms) If the distance of Df is None) If you have connected the system to a speaker with low frequency of 100Hz or below, select "Large." 34 a If you have connected the system to a speaker witha low frequency of 100Hz or below, select out 170 5 "Small." If you have not connected a subwoofer, always select "Large" for Front speaker (L/R). 340 10 510 15 When you do not have select "None." Front L/R speaker's a size certain can speaker connected, be set to "Large" or "Small." If Front L/R size is set to Center can speaker's speaker's size "Small," be set to "Small" Rear and or "None." can be set only to "Large" or "None. the Test Press SELECT/ENTER to test the signals of each speaker. Adjust the volume to match the volume of signals memorized in the system. Front Left (L) Front Right (R) Center Rear Left (L) Rear Right (R) → → Subwoofer's size in test → → Return Press SELECT/ENTER to return to the previous menu. 25 REF NC Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali 6583 Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian 8382 Serbian 6590 Azerbaijani 7185 Gujarati 7776 Malayalam 8385 Sudanese 6665 Bashkir 7265 Hausa 7778 Mongolian 8386 Swedish 6669 Byelorussian 7273 Hindi 7779 Moldavian 8387 Swahili 6671 Bulgarian 7282 Croatian 7782 Marathi 8465 Tamil 6672 Bihari 7285 Hungarian 7783 Malay 8469 Telugu 6678 Bengali; Bangla 7289 Armenian 7784 Maltese 8471 Tajik 6679 Tibetan 7365 Interlingua 7789 Burmese 8472 Thai 6682 Breton 7378 Indonesian 7865 Nauru 8473 Tigrinya 6765 Catalan 7383 Icelandic 7869 Nepali 8475 Turkmen 6779 Corsican 7384 Italian 7876 Dutch 8476 Tagalog 6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga 6789 Welsh 7465 Japanese 7982 Oriya 8482 Turkish 6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar 6869 German 7487 Javanese 8076 Polish 8487 Twi 6890 Bhutani 7565 Georgian 8083 Pashto, Pushto 8575 Ukrainian 6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu 6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek 6979 Esperanto 7577 Cambodian 8277 Rhaeto-Romance 8673 Vietnamese 6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volapuk 6984 Estonian 7579 Korean 8285 Russian 8779 Wolof 6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa 7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba 7073 Finnish 7589 Kirghiz 8372 Serbo-Croatian 9072 Chinese 7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu 26 Area Code List Enter the appropriate code number for the initial setting "Area Code" (See page 14). Code Area Code Area Code Area Code Area AD Andorra ER Eritrea LC Saint Lucia SC Seychelles AE United Arab Emirates ES LI Liechtenstein SD Sudan AF Afghanistan ET Spain Ethiopia LK Sri Lanka SE Sweden AG FI Finland LR Liberia SG Singapore AI Antigua and Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE Georgia MK Macedonia ST Saint Tome and AZ GF French ML Mali SU Former USSR BA Azerbaidjan Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador BB Barbados GI Gibraltar MN Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP Guadeloupe (French) MR Mauritania TF BH Bahrain GQ Equatorial MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia BS Bahamas GY MZ Mozambique TO Tonga BT Bhutan HK Guyana Hong Kong NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda (European Guyana Guinea Georgia & S. Sandwich (USA) Republic French Southern (French) Tobago BZ Belize HR Croatia NG Taiwan HT Haiti NI Nigeria Nicaragua TW Canada TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine ID Indonesia NO IE Ireland NP Norway Nepal UG CG (Keeling) Islands Central African Republic Congo UK Uganda United Kingdom CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands CL Chile CM Cameroon CN Outlying Islands British Indian Ocean NZ New Zealand US United States Territory OM Oman UY Uruguay IQ Iraq PA Panama UZ Uzbekistan China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent & CR Costa Rica IT Italy PG CS Former Czechoslovakia JM Jamaica PH Papua New Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP PL Poland VI Virgin Virgin CX Christmas Island KE Japan Kenya PM Saint Pierre and VN Vietnam CY Cyprus KG Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands DE Germany Djibouti KI Kiribati PT Portugal WS Samoa DJ KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia Republic IO Principe Territories CA CF Mayen Islands Anguilla Guinea Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic Islands (French) State (British) (USA) 27 REF NC Specifications General Power Power requirements AC consumption 14W Dimensions Mass (approx.) 110-240V, 50/60 Hz 430X79.9X410mm(16.9x3.2x16.2inches)(wxhxd) 5.1 (approx.) kg (12.3 lbs) Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F to 95˚F) System Laser Semiconductor Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response laser, wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 S-VIDEO OUT Vp-p (Y) (C) COMPONENT VIDEO OUT 75 1.0 V ohms, sync negative, RCA jack (p-p), (p-p) 0.3 V x 1 75 Ω, negative sync., Mini DIN 75 ohms (Y) 1.0 V (p-p), 75 Ω, negative sync., (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack RCA x jack 4-pin x 1 output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 5 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),330Ω,RCAjack(L,R)x1 75 Ω, Optical connector x 1 2 Audio (p-p), x 1 Accessory S-Videocable.....................1 Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished "DTS" and "DTS 28 Digital works. Out" are Dolby Laboratories. "Dolby" and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. trademarks of Digital Theater Systems, Inc. of Dolby Laboratories. P/NO : 3834RS0042U
advertising