LG | DV235 | LG DV235 Owner’s Manual

DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Page 1
DVD PLAYER
OWNER’S MANUAL
MODEL: DV235
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
P/NO: MFL38970417
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Introduction
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such a bookcase or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating.
The openings should be never be blocked by placing
the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instruction have been adhered to.
CAUTION:
This product employs a Laser
System. To ensure proper use
of this product, please read
this owner’s manual carefully
and retain it for future reference. Should the unit
require maintenance, contact an authorized service
center.
Performing controls, adjustments, or carrying out procedures other than those specified herein may result
in hazardous radiation exposure.
2
Page 2
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where
the cord exits the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
5/14/07
11:58 AM
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . .3-6
Symbol used in this Manual
Notes on Discs . . . . . . . . . .
Types of Playable Discs . . .
Regional Code . . . . . . . . . .
Front Panel . . . . . . . . . . . . .
Remote Control . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.3
.4
.5
.5
.6
Installation . . . . . . . . . . . . . . . . . . . . . . .7-8
Setting up the Player . . . . . . . . . . .7
TV Connections . . . . . . . . . . . . . . .7
Audio Connection to Optional
Equipment . . . . . . . . . . . . . . . . . . .8
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Initial Settings . . . . . . . . . . . . . . . . .9
General Operation . . . . . . . . . . . . .9
Language Setup . . . . . . . . . . . . . . .9
Display Setup . . . . . . . . . . . . . .9-10
Audio Setup . . . . . . . . . . . . . . . . .10
Others Setup . . . . . . . . . . . . . . . .10
Page 3
A section whose title has one of the following symbols is applicable only to the
disc represented by the symbol.
ALL
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
MPEG4
MPEG4 files
Introduction
DV235-PC_HA3SLLB.S_ENG
Notes on Discs
Handling Discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints do not get on the surface. Never
stick paper or tape on the disc.
Operation . . . . . . . . . . . . . . . . . . . . . .11-14
General Playback Features . . .11-12
Using menus to play Audio CD
and MP3/WMA files . . . . . . . . . . .13
Using menus to play JPEG files . .13
Using menus to play MPEG4 files .14
Language Codes . . . . . . . . . . . . .14
Reference . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . .15
Specifications . . . . . . . . . . . . . . . .15
Symbol Used in this Manual
About the
Storing Discs
After playing, store the disc in its case. Do
not expose the disc to direct sunlight or
sources of heat and never leave it in a
parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can
cause poor picture quality and sound distortion. Before playing, clean the disc with
a clean cloth. Wipe the disc from the center out.
Symbol Display
“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is
not available on that specific disc.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended
for older vinyl records.
3
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Introduction
Types of Playable Discs
DVD-VIDEO
Discs such as movies that can
be purchased or rented.
DVD-R
Video mode and finalized only
DVD-RW
Video mode and finalized only
DVD+R
Video mode only
Supports the dual layer disc
also
DVD+RW
Video mode only
Video CD (VCD/SVCD)
Audio CD
CD-R / CD-RW
CD-R/CD-RW discs that contain
audio titles, MPEG4, MP3,
WMA, or JPEG files.
Tip
In addition, this unit plays Dual disc, DVD±R/RW
and CD-R/RW that contains audio titles, MPEG4,
MP3, WMA, and/or JPEG files.
Page 4
MPEG4 file requirement
• Available resolution size:
720x576 (W x H) pixel
• The file names of MPEG4 and subtitle are
limited to 20 characters.
• MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable MPEG4 subtitle:
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha(.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub)
SubViewer 2.0 (.sub/.txt),
TMPlayer(.txt), DVD Subtitle System(.txt)
• Playable Codec format:
“MP43”, “3IV1 “, “3IV2”
• Playable Audio format:
“AC3”, “PCM”, “MP3”
• Sampling frequency: within 8 - 48 kHz (MP3)
• Bit rate: within 8 - 320kbps (MP3)
less than 6Mbps (MPEG4 file)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc:
Less than 650 (total number of files and folders)
Notes on MPEG4 format
• The “ ” will appear if this unit does not support the MPEG4 file.
• If the video and audio structure of MPEG4 file
is not interleaved, returns to the menu screen.
• If there is impossible code to express in the
MPEG4 file name, it may be displayed as “_”
mark.
• The unit does not support the file encoded with
QPEL.
• If the file is encoded with GMC, the unit supports only 1-point of the record level.
MP3/WMA audio file requirement
Note
• Depending on the conditions of the recording
equipment or the disc itself, some discs cannot
be played on the unit.
• Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in
malfunctions.
4
• File extensions: “.mp3”, “.wma”.
• Sampling frequency:
within 8 - 48 kHz (MP3)
within 32 - 48kHz (WMA)
• Bit rate:
within 8 - 320kbps (MP3)
within 32 - 192kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc:
Less than 650 (total number of files and
folders)
5/14/07
11:58 AM
Photo file requirement
Page 5
Notes on Copyrights
•
•
•
•
File extensions: “.jpg”
Photo size: Less than 2MB recommended
CD-R/RW, DVD±R/RW Format: ISO 9660
Maximum Files/Disc:
Less than 650 (total number of files and
folders)
Notes on JPEG file
• Progressive and lossless compression JPEG
image files are not supported.
• Depending on the size and number of the JPEG
files, it may take several minutes to read the
contents of the media.
Regional Code
This unit has a regional code printed on
the rear of the unit. This unit can play only
DVD discs labeled same as the rear of the
unit or “ALL”.
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
• If you try to play a DVD with a different regional code from your player, the message “Check
Regional Code” appears on the TV screen.
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted material without permission. This product
features the copy protection function developed by
Macrovision. Copy protection signals are recorded
on some discs. When recording and playing the
pictures of these discs picture noise will appear.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Introduction
DV235-PC_HA3SLLB.S_ENG
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL
525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Front Panel
a
a Disc Tray
Insert a disc here.
bc d e f
g
h
b Z (OPEN / CLOSE)
Opens or closes the disc tray.
e . (SKIP)
Returns to beginning of current chapter or track or go to previous chapter
or track.
c N (PLAY)
Starts playback.
f > (SKIP)
Go to the next chapter or track.
d x (STOP)
Stops playback.
g POWER button and indicator
Switches the unit ON and OFF.
Lights up red when the unit is turned
on.
h Remote Sensor
Point the remote control here.
5
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
c DVD MENU: Accesses menu on a DVD
disc.
Remote Control
Introduction
Page 6
TITLE: Displays title menu, if available.
a
b / B / v / V (left/right/up/down): Selects
an item in the menu.
ENTER ( ): Acknowledges menu selection.
DISPLAY: Accesses On-Screen Display.
b
RETURN (O): Displays the menu of a
video CD with PBC.
c
d AUDIO: Selects an audio language or an
audio channel.
SUBTITLE: Selects a subtitle language.
d
ANGLE: Selects a DVD camera angle, if
available.
SETUP: Accesses or removes the Setup
menu.
a POWER (1): Switches DVD Player ON
and OFF.
A-B: Repeat sequence from point A to
point B.
ZOOM: Enlarges video image.
OPEN/CLOSE (Z): Opens and closes the
disc tray.
0-9 numerical buttons: Selects numbered items in a menu.
Point the remote control at the remote
sensor and press the buttons.
SKIP (. / >): Go to next chapter or
track. Returns to beginning of current
chapter or track or go to previous chapter
or track.
PAUSE / STEP ( X ): Pauses playback
temporarily/ press repeatedly for frame-byframe playback.
PLAY (N): Starts playback.
STOP (x): Stops playback.
6
Buttons are not available.
Remote Control Operation
CLEAR: Exit the zoom mode.
b SCAN (m / M): Search backward or
forward.
REPEAT: Repeat chapter, track, title, all.
Remote Control Battery Installation
Detach the battery cover on the
rear of the remote control, and
insert a battery (size AAA) with
3 and # aligned correctly.
We recommend to use the
alkaline battery.
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Setting up the Player
The picture and sound of a nearby TV,
VCR, or radio may be distorted during
playback. If this occurs, position the player
away from the TV, VCR, or radio, or turn
off the unit after removing the disc.
Page 7
Advanced TV Connection (Component
Video and Audio Connections)
Connect the COMPONENT VIDEO OUTPUT and AUDIO OUTPUT jacks on the
DVD player to the component video and
audio input jacks on the TV using the component video (C) and audio (A) cable.
TV Connections
Installation
TV
• Depending on your TV and other equipment there are various ways you can
connect the player. Please refer to the
manuals of your TV, stereo system or
other devices as necessary for additional connection information.
A
• Make sure the DVD player is connected
directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system.
C
Basic TV Connection (Composite Video
and Audio Connections)
Connect the VIDEO OUTPUT and AUDIO
OUTPUT jacks on the DVD player to the
video and audio input jacks on the TV
using the video (V) and audio (A) cable.
Rear of DVD player
To enjoy progressive video
• Set the [Progressive Scan] option to “On” on
the setup menu for progressive signal, see page
10.
TV
• Progressive scan work only with the component
video connection.
A
V
Caution
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
If you set [Progressive Scan] option to [On] in
error, you must set the option to [Off]. Remove
any disc from the unit and close the disc tray. Then
press and hold STOP on the remote control for
five seconds.
Rear of DVD player
Note
Do not connect the DVD Player’s AUDIO OUTPUT jack to the phone in jack (record deck) of
your audio system.
7
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Audio Connection to Optional
Equipment
Page 8
Amplifier (Receiver)
Connect the DVD player to your optional
equipment for audio output.
Installation
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro
Logic
A
Connect the left and right AUDIO OUTPUT jacks on the DVD player to the audio
left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio
cables (A).
Amplifier equipped with 2-channel digital
stereo (PCM) or audio / video receiver
equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player’s DIGITAL
AUDIO OUTPUT jacks (COAXIAL X) to
the corresponding in jack on your amplifier. Use an optional digital (coaxial X)
audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this you need a
multi-channel audio / video receiver that
supports one or more of the audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check
the receiver manual and the logos on the
front of the receiver.
Note
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver produces a strong, distorted sound or
no sound at all.
• Six Channel Digital Surround Sound via a digital connection can only be obtained if your
receiver is equipped with a Digital Multi-channel decoder.
8
X
Rear of DVD player
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
5/14/07
11:58 AM
Initial Settings
By using the Setup menu, you can make
various adjustments to items such as picture and sound.
a
b
c
d
a LANGUAGE
• Menu Language
• Disc Audio / Disc Subtitle /
Disc Menu
b DISPLAY
• TV Aspect
• Display Mode
• Progressive Scan
c AUDIO
• Dolby Digital / DTS / MPEG
• Sample Freq.
• DRC
d OTHERS
• PBC
• MPEG4 Subtitle
To display and exit the Menu:
Press SETUP to display the menu. A second press of SETUP will take you back to
initial screen.
Page 9
General Operation
1. Press SETUP.
The Setup menu appears.
2. Use v / V to select the desired option
then press B or ENTER to move to the
second level.
3. Use v / V to select the second
desired option then press B to move to
the third level.
4. Use v / V to select the desired setting
then press ENTER to confirm your
selection. Some items require additional steps.
5. Press SETUP or PLAY to exit the
Setup menu.
Language Setup
Setup
DV235-PC_HA3SLLB.S_ENG
Menu Language
Select a language for the Setup menu and
on-screen display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the
audio track (disc audio), subtitles, and the
disc menu.
Original – Refers to the original language
in which the disc was recorded.
Other – To select another language. Press
number buttons then ENTER to enter
the corresponding 4-digit number
according to the language code list on
page 14. If you enter the wrong language code, press CLEAR.
Off (for Disc Subtitle) – Turn off Subtitle.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
Display Setup
TV Aspect
4:3 – Select when a standard 4:3 TV is
connected.
16:9 – Select when a 16:9 wide TV is connected.
9
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Display Mode
Display Mode setting works only when the
TV Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with
bands on the upper and lower portions
of the screen.
Panscan – Automatically displays the wide
picture on the entire screen and cuts off
the portions that do not fit.
Setup
Progressive Scan
Progressive Scan Video provides the high
quality pictures with less flickering. If you
are using the Component Video jacks for
connection to a TV or monitor that is compatible with a progressive scan signal, set
[Progressive Scan] to [On]. Press ENTER
to confirm your selection. The confirm
menu will appear.
Caution
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
If you set [Progressive Scan] option to [On] in
error, you must set the option to [Off]. Remove
any disc from the unit and close the disc tray. Then
press and hold STOP on the remote control for
five seconds.
Audio Setup
Each DVD disc has a variety of audio output options. Set the player’s AUDIO
options according to the type of audio system you use.
Page 10
PCM (for Dolby Digital / MPEG) – Select
when connected to a two-channel digital
stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically
downmixed to two-channel PCM audio.
Off (for DTS) – If you select “Off”, the DTS
signal is not output through the DIGITAL
AUDIO OUTPUT jack.
Sample Freq. (Frequency)
Check the documentation for your amplifier to verify its capabilities.
48 kHz – If your receiver or amplifier is
NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is
made, this unit automatically converts
any 96 kHz signals to 48 kHz so your
system can decode them.
96 kHz – If your receiver or amplifier is
capable of handling 96 kHz signals,
select 96 kHz.
DRC (Dynamic Range Control)
The dynamic range (the difference
between the loudest sound and the quietest one) can be compressed during
playback of a DVD encoded in Dolby
Digital format. This function takes effect
when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low
or middle volume. Set DRC to On for this
effect.
Others Setup
PBC
Dolby Digital / DTS / MPEG
Set Playback Control (PBC) to On or Off.
Bitstream – Select “Bitstream” if you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or
MPEG decoder.
On – Video CDs with PBC are played
according to the PBC.
Off – Video CDs with PBC are played the
same way as Audio CDs.
MPEG4 Subtitle
You can adjust the default MPEG4
subtitle’s size displayed during MPEG4
playback.
10
5/14/07
11:58 AM
General Playback Features
1. Load your chosen disc in the tray, with
the playback side down.
Page 11
Displaying Disc Information on-screen
Some items can be changed using the
menu.
1. Press DISPLAY during playback.
2. Press PLAY (N) to start playback.
Title (Track) Number
3. To stop the playback, press STOP (x).
Chapter Number
(DVD disc only)
Tip
• The unit records the stopped point, depending
on the disc. “Xx” appears on the screen. Press
PLAY to resume playback (from the scene
point).
• If you press STOP again or unload the disc
(“x” appears on the screen.), the unit will clear
the stopped point.
4. Press OPEN/CLOSE (Z) to remove
the disc.
Press OPEN/CLOSE (Z) to close disc
tray or press POWER (1), the disc
tray closes automatically and unit turns
off.
Time search (page 12)
2. Press b / B to select an item.
The selected item is highlighted.
3. Press v / V to change the setting.
Press ENTER.
You can also use the number buttons if
appropriate (e.g. inputting the title
number).
Note
If no button is pressed for a few seconds, the
on-screen display disappears.
If a menu screen is displayed
To pause playback ALL
The menu screen may be displayed first
after loading a DVD or Video CD which
contains a menu.
During playback, press PAUSE/STEP (X)
to pause playback.
DVD
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press
ENTER to start playback.
Press TITLE or DVD MENU to return to
the menu screen.
VCD
• Use the number buttons to select the
track you want to view.
Press RETURN to return to the menu
screen.
• Menu setting and the exact operating
procedures for using the menu may differ depending on the disc. Follow the
instructions on the each menu screen.
You may also set PBC to [OFF] under
Setup menu (see page 10).
Frame-By-Frame Playback
DVD
MPEG4
Operation
DV235-PC_HA3SLLB.S_ENG
VCD
While the playback is paused, press
PAUSE/STEP (X) repeatedly.
Skip Scan ALL
During playback, press SKIP (./ >)
to go to the next chapter/track or to return
to the beginning of the current
chapter/track.
Press SKIP (.) twice briefly to step
back to the previous chapter/track.
Variable Speed Scan ALL
During playback, press SCAN (m / M)
repeatedly to select the required scan
speed.
DVD: 4 steps
VCD, ACD, MP3, WMA, MPEG4: 3 steps
11
DV235-PC_HA3SLLB.S_ENG
Slow Motion DVD
5/14/07
MPEG4
11:58 AM
VCD
While the playback is paused, press
SCAN (M) repeatedly to play in slow
motion (4 steps, forward only).
Page 12
DVD Menu DVD
The disc menu appears on the screen
when DVD MENU button is pressed.
Angle Selection DVD
Repeat Playback ALL
DVD: Chapter/Title/Off
During playback of DVD disc contains
scenes recorded different camera angles,
press ANGLE repeatedly to select a
desired angle.
VCD, MPEG4, ACD, MP3, WMA:
Track/All/Off
Subtitle Selection DVD
During playback, press REPEAT repeatedly to select a desired repeat mode.
MPEG4
During playback, press SUBTITLE repeatedly to select a desired subtitle language.
Note
• On a Video CD with PBC, you must set PBC to
Off on the setup menu to use the repeat function
(See “PBC” on page 10).
• If you press SKIP (>) once during Repeat
Chapter (Track) playback, the repeat playback
cancels.
Audio Selection DVD
MPEG4
VCD
During playback, press AUDIO repeatedly
to hear a different audio language or audio
track.
Screen Saver
Operation
A-B Repeat Playback ALL
During playback, each press of A-B button
to select point A and point B and repeats
a sequence from point A (Starting point) to
point B (End point).
Press A-B again to cancel.
The screen saver appears when you leave
the DVD player in Stop mode for about five
minutes. If the Screen Saver is displayed
for five minutes, the DVD Player automatically turns itself off.
Time Search DVD
Zoom DVD
MPEG4
VCD
During playback or pause mode, press
ZOOM to enlarge the video image.
(If an MPEG4 file is playing back, the playback will be paused.)
You can move through the zoomed picture
using b / B / v / V buttons. Press CLEAR
to exit.
Note
Zoom may not work on some DVDs.
VCD
MPEG4
To start playing at any chosen time on the
disc:
1. Press DISPLAY during playback.
2. Press b / B to select the time clock icon.
3. Input the required start time in hours,
minutes, and seconds from left to right.
Playback starts from the selected time.
If you enter the wrong numbers, press
CLEAR to remove the numbers you
entered. Then input the correct numbers.
System Select
Title DVD
If the current DVD title has a menu, the
title menu appears on the screen when
TITLE button is pressed. Otherwise, the
disc menu may appears.
12
You must select the appropriate system
mode for your TV system. If No disc appears
on the TV screen, press and hold
PAUSE/STEP for more than 5 seconds to be
able to select a system (PAL, NTSC, or
Auto).
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Page 13
Using menus to play Audio CD and
MP3/WMA files
Using menus to play JPEG files
This unit can play AUDIO CDs or
MP3/WMA files.
1. Insert a JPEG file recording media and
the menu appears on the TV screen.
This unit can play JPEG file.
Audio CD
Once you insert an audio CD, a menu
appears on the TV screen. Press v / V to
select a track then press PLAY or ENTER
to start playback.
2. Press v / V to select a folder, and
press PLAY or ENTER to see the folder contents.
3. Press v / V to select a file then press
PLAY or ENTER. Slide Show starts.
MP3 / WMA
During slide show, press STOP to move to
the menu.
1. Press v / V to select a folder, and
press PLAY or ENTER to see the folder contents.
Pause the slide show
2. Press v / V to select a file then press
PLAY or ENTER. Playback starts.
Press PAUSE/STEP during slide show.
To return to the slide show, press PLAY or
press PAUSE/STEP again.
Moving to another File
Operation
Stop the slide show
Press SKIP (. or >) once while
viewing a picture to advance to the next or
previous file.
Zoom picture
Tip
• If you want to move to the upper directory, use
v / V to highlight
and press PLAY or
ENTER.
• Press DVD MENU to move to the next page.
Press TITLE to move to the previous page.
During slide show, press ZOOM to enlarge
the video image.
You can move through the zoomed picture
using b / B / v / V buttons.
Press CLEAR to exit.
Rotating the picture
During slide show, press b / B to rotate
the picture clockwise or counter clockwise.
To flip the picture
Press v / V during showing a picture to
flip the picture horizontally or a vertically.
13
DV235-PC_HA3SLLB.S_ENG
5/14/07
11:58 AM
Using menus to play MPEG4 files
Language Codes
This unit can play MPEG4 file.
Use this list to input your desired language
for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
1. Insert a MPEG4 file recording media and
the menu appears on the TV screen.
2. Press v / V to select a folder, and
press PLAY or ENTER to see the folder contents.
3. Press v / V to select a file then press
PLAY or ENTER. Playback starts.
• The “ ” will appear if this unit does
not support the MPEG4 file.
• During playback, this unit skips the
unplayable MPEG4 file.
4. To return to the menu during playback,
press STOP.
Operation
Tip
• If you want to move to the upper directory, use
v / V to highlight
and press PLAY or
ENTER.
• Press DVD MENU to move to the next page.
Press TITLE to move to the previous page.
• The disc subtitle may not be displayed properly,
if a MPEG4 subtitle is downloaded through the
internet.
• You can use variable playback functions. Refer
to page 11-12.
Notice for displaying the MPEG4 subtitle
If the subtitle does not display properly, please follow the steps below.
1. Press and hold SUBTITLE for about 3 seconds
during playback.
The language code will appear.
2. Press b / B to select another language code
until the subtitle is displayed properly.
3. Press ENTER.
Note:
The MPEG4 subtitle file name has to be identified
with the MPEG4 file name to display by this unit.
14
Page 14
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
5/14/07
11:58 AM
Page 15
Troubleshooting
Specifications
No power.
• Plug the power cord into the wall outlet
securely.
General
The power is on, but the DVD player does not
work.
• Insert a disc.
No picture.
• Select the appropriate video input mode
on the TV.
• Connect the video cable securely.
No sound.
• Select the correct input mode of the
audio receiver.
• Turn on the equipment connected with
the audio cable.
• Set the AUDIO option to the correct
position. (page 10)
The DVD player does not start playback.
• Insert a playable disc. (Check the disc
type and regional code.)
The remote control does not work properly.
• Point the remote control at the remote
sensor of the DVD player.
• Operate the remote control closer to the
DVD player.
Note
• To ensure proper use of this product, please read
this owner’s manual carefully and retain for
future reference.
• This manual provides information on the operation and maintenance of your DVD player.
Should the unit require service, contact an
authorized service location.
• Power requirements:
AC 110-240 V, 50/60 Hz
• Power consumption: 5 W
• Dimensions (Approx.):
360 x 35 x 200 mm (14.2 x 1.4 x 7.9
inches) (W x H x D)
without foot
• Net Weight (Approx.): 1.4 kg (3.1 lbs)
• Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
• Operating humidity: 5 % to 90 %
Outputs
• VIDEO OUTPUT: 1.0 V (p-p), 75 Ω,
sync negative, RCA jack x 1
• COMPONENT VIDEO OUTPUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync,
RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, RCA jack x 2
• AUDIO OUTPUT: 2.0 Vrms (1 KHz,
0 dB), 600 Ω, RCA jack (L, R) x 1
• DIGITAL AUDIO OUTPUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
System
• Laser: Semiconductor laser
• Signal system: PAL/NTSC
• Frequency response:
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 20 kHz
CD: 8 Hz to 20 kHz
• Signal-to-noise ratio: More than 85 dB
(ANALOG OUTPUT connectors only)
• Harmonic distortion: Less than 0.02%
• Dynamic range: More than 95 dB
(DVD/CD)
• Accessories:
Video cable (1), Audio cable (1),
Remote control (1), Batteries (1)
Reference
DV235-PC_HA3SLLB.S_ENG
Note
Design and specifications are subject to change
without prior notice.
15
Download PDF

advertising