LG | DV5502P | LG DV5502P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV5502P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
WARNING
Notes
OF ELECTRIC SHOCK
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
within
symbol
is intended to alert the
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
WARNING: TO REDUCE THE RISK
DO NOT REMOVE COVER
on
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
a
risk of electric
play in public, or rent copyright material without
permission.
This product features the copy protection function developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, the picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
within
point
is intended to alert the
user
an
equilateral triangle
to the presence of
and maintenance
important operating
(servicing)
accompanying the
instructions in the literature
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
LASER
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
manual
carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of
controls, adjustments
other than those
specified
or
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
apparatus shall
or
such
vases, shall be
2
as
splashing
and that
dripping
not be
exposed to water,
objects filled with liquids,
no
placed
on
the
apparatus.
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
on
this unit. This number is
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
OperationwithAudioCDandMP3Disc.
PlayinganAudioCDandMP3Disc.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
Pause.............................18
MovingtoanotherTrack................18
RepeatTrack/All/Off...................18
Search.............................18
Random...........................18
RepeatA-B.........................18
3DSurround........................18
.
RemoteControl............................7
RearPanel................................8
.18
ChangingtheAudioChannel.
ProgrammedPlayback.....................19
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Disc..........................19
Preparation
RepeatProgrammedTracks.
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
ProgrammedPlaybackwithVideoCD
.
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.19
.19
AdditionalInformation...................20-21
LastConditionMemory...................20
ScreenSaver...........................20
VideoModeSetting......................20
ControllingtheTV.......................20
NotesonMP3Discs.....................21
Picture.............................12
Sound.............................13
Others(DRC/Vocal/PBC)...............13
ParentalControl......................14
Operation
Reference
Troubleshooting..........................22
LanguageCodeList.......................23
CountryCodeList.........................24
Specifications............................25
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
.
GeneralFeatures........................15
About the
symbols
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
Indicates hazards
SlowMotion.........................15
itself
.
.
.
.
.
Still Picture and Frame-by-Frame Playback
16
Repeat............................16
RepeatA-B.........................16
or
for instructions
likely to cause
damage.
harm to the unit
other material
.
TimeSearch........................16
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
3DSurround........................16
Zoom..............................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitle............................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
Chapter (DVD only)
Sections of a picture
(8cm/12cmdisc)
In
addition, this unit
can
play
or
SVCD, CD-R
a
Depending
ment
or
CD-RW
MP3 files.
on
the conditions of the
the CD-R/RW disc
or
discs cannot be
--
--
--
The unit cannot
itself,
played on the unit.
play the CD-R/RW
recording equipCD-R/RW
Track
(Video
Sections of
discs that do not
Scene
or
irregular shaped
octagonal). It may result in
Notes
on
(the
(e.g., heart-shaped
malfunctions.
On
a
piece
that
are
smaller
CD and audio CD
picture
or a
only)
piece on a video CD
assigned a track number,
musical
audio CD. Each track is
or an
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
CDs
musical
composed of one or several chapters. Each
assigned a chapter number, enabling you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
enabling
use
or a
is
contain any data, or contain different kinds of formatted data other than MP3 and CD-DA data.
Do not
enabling
easily.
A title is
chapter
some
feature content
than titles.
Notes
--
accompanying
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
that contains audio titles
(DVD only)
DVD
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs may
intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playbe
back features of the unit may not be
functions may be added.
Refer also to the instructions
available,
supplied
or
other
Types
There
with the DVDs
two
types of video CDs:
Video CDs
PBC
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
of video CDs
are
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
code of the DVD player and DVDs
3
player is designed and manufactured
for playback of region "3" encoded DVD software.
The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit
can play only DVD discs labeled "3" or "ALL". If you try to
play any other discs, the message "Check Regional
Regional
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
Note
To avoid
is
prohibited by
on
area
limits.
DTS-encoded CDs
possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
4
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
Cleaning
temperature
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
the exterior surfaces clean
use
volatile
liquids,
such
as
insecticide spray,
the unit. Do not leave rubber of
contact with the unit for
leave marks
on
a
plastic products in
long period of time. They will
the surface.
the unit
Cleaning
To clean the cabinet
Use
as there may be a considerable
increase inside the car.
a
use a
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
use
thinner,
or
are
moistened with
lightly
strong solvents,
as
these
a
extremely dirty,
mild detergent
such
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
on
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
get
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Display Window
POWER
Forward
Switches the
player
ON and OFF.
Skip/Scan ( T / R )
chapter/track.
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Skip/Scan ( Q / S )
chapter/track or to PREVIOUS
chapter/track.
Reverse
Go to
beginning
of current
Press and hold for two seconds for
a
fast
search.
reverse
STOP(9)
Stops playback.
Pause
PAUSE(;)
playback temporarily / press repeatedly
for frame-by-frame playback.
PLAY(2)
playback.
Starts
Disc
Insert
a
Tray
disc here.
Display
Opens
or
OPEN/CLOSE
(
closes the disc
tray.
window
Shows the current status of the
/
)
Remote Sensor
Point the DVD
player.
Lights red when the power cord is plugged into the wall
Lights green when the player is in power on mode.
Lights red when the player is in Standby mode (off).
Player
remote control here.
power outlet.
?
?
Lights
when
a
disc is inserted
Lights during playback.
Lights during
random
playback.
Lights during repeat playback.
6
Remote Control
DVD/TV select button
Selects
OPEN/CLOSE
mode of remote
operational
Player
-
ON and OFF.
POWER
OPEN/CLOSE
-
DVD
DISPLAY
1
2
Select
-
-
DISPLAY
an
item in the
Select channel of TV and
ENTER
VOL
changes
TV AV
MENU
-
?
CLEAR
or
A-B
RANDOM ZOOM
a
DVD
MARKER SEARCH
*
angle
Accesses
or removes
setup
Marks any
Displays
MARKER SEARCH
Remote Control
?
if
?
Angle:
remote
Program
REPEAT
Repeat chapter, track, title,
all.
?
?
A-B
Repeat
?
?
?
sequence.
RANDOM
Plays
?
tracks in random order.
ZOOM
Enlarges
menu.
Point the remote control at the remote
remote
or removes
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Remote control
sensor
and press
the buttons.
AAA AAA
(7 m)
Press and hold button for about
CLEAR
?
Operation Range
Distance: About 23 ft
Reverse SKIP/SCAN
menu.
point during playback.
SEARCH
track.
Accesses
menu.
MARKER
)
chapter
PROGRAM
?
available
SETUP
T
two seconds.
language.
camera
forward*/go
(
to next
Search
language (DVD)
audio channel (CD).
ANGLE
Selects
of the disc if
( S )
backward*/go to beginning
of current chapter or track or go to
previous chapter or track.
?
REPEAT
a menu.
SUBTITLE
menu
?PLAY(2)
Starts playback.
or
subtitle
selection.
Forward SKIP/SCAN
Search
0-9 number buttons
a
channel.
input
menu
the Title
Displays
SKIP/SCAN
PROGRAM
ForwardSLOW(.)?
Forward slow playback.
Selects
Selects AUX A/V
available.
STOP(9)?
Stops playback.
an
video CD
a
SLOW
AUDIO SUBTITLE ANGLE SETUP
AUDIO
menu.
of
TITLE
PLAY
PAUSE(;)?
Pauses playback temporarily / press
repeatedly for frame-by-frame
playback.
audio
setup
menu
Acknowledges
PR./CH
SLOW PAUSE/STEP STOP
ReverseSLOW(,)?
Reverse slow playback.
an
the
SELECT/ENTER
TITLE
SKIP/SCAN
Selects
Removes the
Displays
VOL
DVD disc.
Selects numbered items in
turn off TV sound.
with PBC.
SELECT
menu
MENU
menu on a
-
PR./CH
volume of TV.
Accesses
RETURN
(left/right/up/down)
4
3
display
during
playback.
RETURN/TV AV
TV SOUND/MUTE
-
on-screen
Select 3D SURROUND
disc
This button is not available.
Accesses
tray.
SOUND/MUTE
POWER
Switches DVD
and closes the disc
Opens
control.
from the front of the
battery
video
image.
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
sensor.
with
the
rear
of
two R03
and
About 30° in each direction of the front of the
sensor.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
COAXIAL
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
AUDIO OUT
Connect to
*System
Select switch
(Left/Right)
amplifier, receiver,
an
or
stereo
system.
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
R
S-VIDEO
VIDEO
OUT
OUT
AC Power Cord
S-VIDEO OUT
Connect to
a
TV with S-Video
Plug
inputs.
into the power
source.
VIDEO OUT
Connect to
a
TV with video
*
inputs.
System
You
Select switch
enjoy
can
NTSC
or
PAL discs
by using System
appropriate system.
player is connected with
Select switch to choose the
PAL:
Select when DVD
NTSC:
Select when DVD
PAL-TV.
player
is connected with
player
is connected with
NTSC-TV.
AUTO:
Select when DVD
Multi
?
system
When the selected
coincide with the
picture
?
Set
off.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
System
system
may not be
System
TV.
Select switch does not
of your
TV, normal color
displayed.
Select switch when the power is turned
Connections
Rear of TV
Tips
Depending
to
your TV and other equipment you wish
are various ways you could connect
on
S-VIDEO
the
player.
Use
only
one
VIDEO
INPUT
AUDIO INPUT
INPUT
connect, there
of the connections
L
R
L
described below.
PREATION
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
For better sound
AUDIO OUT
reproduction, connect
jacks to the audio in jacks
the
player's
of your
audio/video equipment.
amplifier, receiver, stereo or
See "Connecting to optional equipment"
on
S
A
V
page 10.
Caution
--
Make
sure
the DVD
Player
is connected
TV. Tune the TV to the correct video
--
directly
to the
channel.
Do not connect the DVD
Player's AUDIO OUT jack to
jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
the
--
input
phono
in
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
system.
R
Connecting
Make
the
to a TV
S-VIDEO
of the
following connections, depending
capabilities of your existing equipment.
one
OUT
VIDEO
OUT
on
Rear of DVD
player
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
supplied (V).
on
Connect the Left and
the DVD
TV
jack on
using
the TV
Right
Player
to
AUDIO OUT
to the audio
Player
(A) using the supplied
the DVD
the video cable
left/right
in
jacks of
jacks on the
audio cables.
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
S-Video cable
2
jack
(S).
on
jack
the TV
on
the DVD
using
the
Player
optional
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
the DVD
TV
9
Connections
Connecting
(Continued)
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
Connect the Left and
DVD
Player to the
amplifier, receiver,
audio cables (A).
Right
Rear of DVD
player
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
two
AUDIO OUT
jacks on the
right in jacks on your
system, using the supplied
R
audio left and
or
stereo
S-VIDEO
VIDEO
OUT
OUT
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
1
X
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(coaxial X) audio cable.
OUT
You will need to activate the
2 (See "Digital
Audio
player's digital output.
Output" on page 13).
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Digital
Multi-channel sound
A
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that
supports
one or more
of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--
A
To
see
screen
10
the audio format of the current DVD in the
display,
press AUDIO.
on-
L
R
AUDIO INPUT
Before
Operation
Before
the remote
using
control, press the DVD
button to select the device to be
General
or
TV
gives
DVD
Some DVDs
operated.
General
screen.
playback
Temporary
the
setting
of
an
item.
be also be used for
number).
For
some
setting
functions,
setting.
Title
Repeat
Track
(non-PBC
Repeat
All Tracks
AB
Repeat
A-B
OFF
Repeat
Off
ALL
Resume
displayed on the TV
changed on the menu.
be
title
can
Feedback Field Icons
be
can
change
Repeat Chapter
CHAPT
TRACK
Action
display operation
Press DISPLAY
1
can
(e.g.,
Repeat
TITLE
Display
Some items
On-screen
2
basic instructions for
status
to
press SELECT/ENTER to execute the
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
or 2
The number buttons
numbers
Explanation
This manual
Press 1
3
Caution:
play
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press
3 or 4
to select
an
The selected item will be
item.
highlighted.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
titles,
1/12
Time search
language
Digital Audio
Output mode
1
ENG
and
Subtitle
language
Angle
D
6CH
OFF
1/1
Sound
Shows the current
chapters,
and
chapter
skips
number and total number of
to the desired
chapter
1/2,or
Numbers SELECT/ENTER
number.
elapsed playing time, and
point by the elapsed time directly.
searches the
1/2,or
Numbers SELECT/ENTER
Numbers SELECT/ENTER
Shows the current audio soundtrack
encoding method and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
changes
the
1/2
setting.
Shows the current
angles,
and
angle number and total
changes the angle number.
mode,
1/2
number of
and
setting.
1/2
1/2
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
Sound
to the desired title number.
Shows the current sound
NORM.
VCD2.0
skips
Shows the
0:16:57
Audio
and
Selection Method
0:16:57
STER.
NORM.
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1/2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
changes
and
channel,
(Display only)
and
the
setting.
mode,
--
1/2
the audio channel.
Shows the current sound
changes
time
and
1/2
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Menu
Settings
Select
Personal Preferences
own
on
the
play-
you
Language
see
for the
language
a
setup
menu.
This is the
menu
when you press SETUP.
er.
Initial
General
Settings
Operation
Disc Audio
Chinese
Disc Subtitle
English
Disc Menu
Rating
1
Press SETUP.
The
setup
Country
menu
TV
appears.
Menu
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Language
Audio
Digital
Output
Others
Spanish
Aspect
Menu
Code
Aspect
Italian
Picture
Chinese
Language
Polish
Audio
Digital
Output
Hungarian
TV
Russian
Other------------
Others
The
screen
selected
will show the current
item,
well
as
as
nected.
setting for the
setting(s).
alternate
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
3
4
5
Press
require
additional
SETUP, RETURN
or
steps.
PLAY to exit the
Displays
setup
above and below the
4:3 Panscan: Select when
Either
Disc
language
a
DVD
4:3 Letterbox
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Menu,
Audio and
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 23. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Original
Disc Audio
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Spanish
Italian
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Russian
Others
12
Other------------
Code
Aspect
Language
Audio
con-
bars
conscreen.
16:9 wide TV is connected.
a
Disc Subtitle
Others
for the disc's
your TV
Disc Audio
Digital
Language
masking
standard 4:3 TV is
Displays pictures cropped to fill
sides of the picture are cut off.
Menu
Select
a
with
nected.
TV
Language
standard 4:3 TV is
images
picture.
Country
menu.
a
theatrical
16:9 Wide: Select when
Press SELECT/ENTER to confirm your
selection.
Some items
DVD
4:3 Letterbox: Select when
Press 3/4 to select the desired item.
2
Aspect
Output
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
Set the
variety
output options.
player's Digital Audio Output according to the
type of audio system you
DRC, Vocal and PBC settings
can
be
changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
of audio
a
changed
use.
between On and Off.
PREATION
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipment with
a
equipment
decoder
or
with
a
DTS
amplifier.
PBC On
Code
Aspect
Menu
Language
Digital
2 channel
digital
player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
stereo
Disc Menu
Country
MPEG decoder.
a
Vocal On
TV
decoder, Dolby Digital
PCM: Select when connected to
DRC On
Disc Subtitle
Rating
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
Disc Audio
Audio
Output
Others
The DVD
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Country
TV
Code
Aspect
Menu
48 KHz
Language
Digital
Audio
Sample Freq.
96KHz
Dynamic Range
Control
(DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
lower volume without
DRC to On for this effect.
Output
Vocal
Others
Sample Frequency
To
change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz signals to 48KHz
your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
so
Set Vocal to On
is
playing.
only
when
a
multi-channel karaoke DVD
The karaoke channels
on
the disc will mix
into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
made, this unit will pass each type of signal through
without any further
processing.
13
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
to the
applies
not suitable for
able for selection
more
on some
country-dependent.
disc
complete
the disc. These
scenes on
8, and alternatively,
1 to
scenes
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
suitable
discs.
or
scenes are
to
8
7
Disc Menu
6
Rating
5
Country
TV
Code
avail-
Menu
Country
TV
Menu
2
Audio
Output
1
Select
2
While
3
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create
is
Audio
Output
Select
the
Code
Country
setup
using
the 3/4 buttons
on
menu.
2
While
Code is
3
Follow
4
Select the first character
Country
selected, press 2.
Unlock
Others
and
Digital
1
Change
3
Language
Others
1
"Rating"
Code
Aspect
3
Language
Digital
US
Rating
are
4
Aspect
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Subtitle
were
to the list
List", page 24.).
Disc Subtitle
The Parental Control feature allows
Disc Audio
disc, referring
Disc Audio
rated from
scenes are
Ratings
Code
(See "Country
whose standards
country/area
a
used to rate the DVD video
2.
selected, press
personal 4-digit security password,
then press SELECT/ENTER. And enter the 4-digit
password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass-
3 of
step
Shift the
cursor
"Rating"
using
5
the second character
6
code
on
left.
using
the 3/4 buttons.
1/2 buttons and select
using
3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
menu.
a
Note
Confirmation of the
the code is
below
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
word, then press SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
4
Select
a
from 1 to 8
rating
(1) has
tons. One
using
playback restrictions.
playback restrictions.
the least
has the most
Eight (8)
the 3/4 but-
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
Ratings
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
played. Higher
unless
an
rated
alternative
scenes
scene
is available
The alternative must have the
lower
one.
If
no
will not be
same
Changing
the
1
Follow
2
Enter the old
3
Select
Steps
4-digit
1-2
as
code
shown above to the left
Change using
the 3/4 buttons then press
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
on
rating
the disc.
or a
suitable alternative is found,
menu.
play-
If you
If you
forget
forget
4-digit
your
your
password,
code
to clear the current pass-
word, follow the procedure below.
Press SELECT/ENTER to confirm your
2
then press SETUP to exit the
rating
1
Press SETUP to
display
the
setup
menu.
Use the Number buttons to enter the
6-digit
number
"210499."
menu.
The
3
14
time and veri-
played
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5 selection,
(Rating).
code, then press SELECT/ENTER.
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
nected to the DVD
Audio
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
VCD2.0
DVD
the TV and select the video
General Features
the audio
on
input
source
Unless stated
otherwise, all operations
described
the remote control. Some
use
features may also be available
system
on
the
Setup
menu.
connected to the
Moving
player.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc
tray.
When
Load your chosen disc in the
2 facing
tray, with the label
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
3
a
Press OPEN/CLOSE to close the
READING appears
starts
automatically.
tray.
might
appear
Moving
DVD
When
instead.
The
is
or
loading
a
DVD
3
4
buttons to select the
title/chapter
you want to view, then press SELECT/ENTER to start
or
MENU to return to the
menu screen.
a
title
on a
more
buttons
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
menu screen.
You also may set PBC to Off under
13.
one
setup. See page
one
chapter
can move
or a
to another
Slow Motion
player
DVD
4-digit
be entered and/or the disc must be authorized
(see
T
or
VCD2.0
rapid
VCD1.1
during playback.
will enter SLOW mode.
or
T to select the
t
If Parental Control is set and the disc is not within the
code must
press the buttons in
succession.
2 Use the SLOW t
Rating settings (not authorized),
than
(0-9).
1 Press SLOW t
Notes
the
more
track, you
follows:
two-digit numbers,
The
--
disc has
than
as
1/3
Note
For
menu screen.
and the exact
using
stopped, then
(0-9) to
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
playback.
Press TITLE
is
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
displayed
may be displayed first after
Video CD which contains a menu.
Use the 1 2
to
can move
Press SKIP/SCAN .
menu screen
DVD
title, you
playback
1/12
VCD1.1
disc has
a menu screen
one
to another CHAPTER/TRACK
chapter/track
If
than
more
follows:
as
Press DISPLAY when
the TV screen, and playback
If playback does not start,
menu
disc has
press the appropriate numbered button
select a title number.
sure
on
press PLAY.
In some cases, the disc
a
another title
3
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
1/16, T 1/8, T 1/4 or T 1/2 (forward).
To exit slow motion mode, press PLAY.
or
T
"Parental
--
--
Control", on page 14).
DVDs may have a region code.
Your player will not play discs that have
different from your
player is 3 (three).
player.
The
region
Note
a
region
code
code for this
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
The
2 You
can
ing
Frame-by-frame playback
Search
repeatedly
VCD2.0
DVD
1 Press and hold SKIP/SCAN .
during playback.
now
player
will
repeat
The
by
press-
on
the TV
currently playing,
All icon appears
Repeat
3 To exit
The
screen.
press REPEAT
a
Repeat mode,
screen.
press REPEAT
Off icon appears
Repeat
the TV
on
on
the TV
a
third time.
screen.
Note
VCD1.1
two seconds
the disc
press REPEAT.
currently playing,
icon appears
second time.
the remote control.
The
the track
Repeat Track
now
on
Repeat Track/All/Off
-
repeat
The
2 To
go into PAUSE mode.
advance the picture frame-by-frame
PAUSE
1 To
during playback.
will
player
Video CDs
(continued)
VCD1.1
1 Press PAUSE
(Continued)
On
> for about
or
Video CD with
a
setup
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
to
menu
Repeat
use
A-B
PBC, you
the
must set PBC to Off
Repeat
VCD2.0
DVD
on
the
function. See page 13.
VCD1.1
to select the
3 To exit SEARCH
mode, press PLAY.
A*
To
AB
repeat
sequence in
a
A- appears
briefly
2 Press A-B
again
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
appears on the display window.
title:
the TV
on
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat sequence
on
the player's display).
appears
begins (
VCD1.1
Karaoke DVD
a
1 Press A-B at your chosen
A-B appears
Random
OFF
briefly
on
3 To cancel the sequence, press A-B.
The unit
2 To return to normal
disappears
on
playback, press RANDOM
display window.
until
Time Search
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
the
1 Press DISPLAY
Tips
By pressing SKIP/SCAN . or > during
playback, the unit selects another title (track)
resumes Random playback.
0:16:57
DVD
play
on
appears
the
The Time Search box shows the
and
current disc.
Note
elapsed playing
seconds, press 3/4
Search icon in the
on-screen
at
dis-
screen.
Random
2 Within 10
The
during playback.
playing
on-screen
time of the
to select the Time
display.
The "-:--:--" appears in the Time Search box.
This function
works with DVD Karaoke discs and
only
3 Within 10
video CD without PBC.
the
seconds,
required
onds from left to
Repeat
CHAPT
VCD2.0
DVD
the number buttons to enter
right
hours, minutes and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
TRACK
TITLE
use
start time. Enter
OFF
4 Within 10
seconds, press SELECT/ENTER
to confirm
the start time.
DVD Video Discs
1 To
-
Repeat Chapter/Title/Off
Playback
repeat the currently playing chapter, press
an
invalid
starts from the selected time
on
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
screen.
repeat the title currently playing, press REPEAT
second time.
The
Repeat Title
3 To exit
The
3D Surround
This unit
icon appears
Repeat mode,
Repeat
a
on
the TV
press REPEAT
Off icon appears
on
the TV
screen.
a
third time.
screen.
can
DVD
produce
a
3D SUR
NORM.
3D Surround
simulates multi-channel audio
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
2 To turn off the 3D Surround
again
to select "NORM".
or
system.
1 Press SOUND to select "3D SUR"
16
effect, which
playback
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
during playback
or
still
playback
If you press ZOOM repeatedly, the
increases up to six times.
discs: Menus
to acti-
level
magnification
move
picture.
3 Press CLEAR to
the
normal
resume
playback
DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or,
the zoomed
through
or
return to
paused image.
use
the 1/2/3/4 buttons to
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
multi-angle
scenes.
Marker Search
your selection,
highlight
then press SELECT/ENTER.
Note
The
DVD
the contents of DVD Video
Checking
vate the Zoom function.
2 Use the 1/2/3/4 buttons to
DVD Features
Special
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
(Continued)
remove
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
a
memorized
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
on a
1
Marked Scene
a
disc
During
playback,
The MARKER SEARCH
2 Within 10
to
The number of the current
menu
will appear
seconds, press 1/2
on
to select
recorded at different
a
different
camera
angle
camera
appears
on
the
a
display.
a
the
screen.
Marker
Changing
num-
1
the Audio
Language
DVD
ENG
D
6CH
will start from the Marked
remove
scenes
1/1
press SEARCH.
3 Press SELECT/ENTER.
4 To
DVD
again.
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
ber that you want to recall.
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press MENU
If the disc contains
briefly.
screen
is
menu
remove
Press AUDIO
scene.
the MARKER SEARCH menu, press
ferent audio
repeatedly during playback
language or audio track.
to hear
dif-
a
SEARCH.
Subtitles
To clear
1
a
During
disc
playback,
The MARKER SEARCH
2
1
ENG
Press SUBTITLE
press SEARCH.
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to
see
the
Press 1/2 to select the Marker number that you want
to
3
DVD
Marked Scene
Note
erase.
If
Press CLEAR.
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3 Disc
Operation
Playing
Audio CD and MP3 disc
an
The DVD
Player
CD-ROM,
CD-R
Before
MP3 formatted
recordings
on
read the notes
recordings,
on
MP3
page 21.
CD
1 Press and hold SKIP/SCAN .
CD-RW discs.
or
MP3
playing
Recordings on
play
can
Search
two seconds
during playback.
The
now
player
will
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
>
or
repeatedly
to select the
Insert
1
The
a
disc and close the
menu
CD
tray.
the TV
on
appears
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
screen.
3 Search
MP3
Program
Program
TRACK 1
TRACK 1.MP3
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
speed
and direction
indicated
are
on
the
menu screen.
4 To exit SEARCH
mode, press PLAY.
TRACK 7.MP3
TRACK 7
Clear All
TRACK 8
STER.
0:56:35
Audio CD
Clear All
TRACK 8.MP3
56:35
NORM.
MP3
menu
CD
Random
OFF
1
1 Press RANDOM
menu
during playback
or
when
playback
is
stopped.
Press 3/4 to select
2 Playback
will
Playback
3
To
The unit
track then press PLAY.
a
automatically begins
RANDOM
starts.
stop
stop playback
at the end of the disc.
at any other
or
time, press STOP.
2 To return to normal
until RANDOM
window and
CD
Repeat
during playback.
playback,
press PLAY
or
press PAUSE
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
case
CD
to another Track
MP3
or
of audio
CD,
2 To
briefly
to
step back
to
directly to any track, enter
the numbered buttons (0-9)
3 To cancel
The
Repeat
-"
Repeat
Repeat
icon and "A
begins
the
on
menu screen.
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
Repeat
icon and "OFF" appears
3D Surround
on
the
play,
press
menu screen.
CD
icon appears
on a
on
MP3
the
CD
produce
can
a
3D Surround
menu screen.
disc, press REPEAT
a sec-
Repeat mode,
on
the
menu screen.
press REPEAT
Off icon appears
on
the
a
from two
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
again
or
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
All icon appears
effect, which
playback
conventional stereo
during playback.
effect, press SOUND
to select "NORM".
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT or RIGHT).
ferent audio channel
18
appears
at your chosen end point.
icon and "A B" appears on the menu screen,
again
simulates multi-channel audio
ond time.
Repeat
The
The
repeat the track currently playing, press REPEAT.
The
sequence.
press A-B at your chosen start-
This unit
repeat all tracks
a
CD
to go
using
Repeat Track/All/Off
Repeat Track
repeat
and the sequence
during playback.
The
playback, press RANDOM repeator
disappears on the display
During disc playback,
ing point.
The
to return to the
track.
the track number
1 To
and
window and
menu screen.
A-B
2 Press A-B
briefly during
playback to go to the next track
beginning of the current track.
the
To
1
again.
Moving
display
Playback
MP3
1 Press PAUSE
2 To return to
Random
the
menu screen.
edly
Pause
appears
on
CD
dif-
Programmed Playback
Programmed Playback
CD
VCD2.0
MP3
with Audio CD
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
The
2
menu
tracks for
or
is
displayed
on
the TV
Video CD with
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
Insert Video CD and close the
1
tray.
2
screen.
during playback or in
the Program Edit mode.
mode to enter
on
a
60 tracks
Press PROGRAM
the
Press PROGRAM while
The VCD
Program
stop
menu
OPERATION
tray.
is
playback
stopped.
will appear.
VCD
Program
E
TRACK 1
E
The
On
a
setup
(Audio CD)
Insert the disc and close the
1
with Video CD
Programmed Playback
and MP3 Disc
Program can
(MP3 disc).
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
TRACK 2
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
Note
Press PROGRAM to exit the
mark will
3
Edit
Program
disappear.
Note
Press 3/4 to select
track then press
SELECT/ENTER to place the selected track
the
E
mode; the
Program
list.
step
4 Repeat
Program
3 to
Press RETURN
a
additional tracks
on
Program
E
MP3
Program
TRACK 12
TRACK 1.MP3
TRACK 8.MP3
TRACK 2
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
To
E
To
STER.
NORM.
Repeat Track
The
56:35
1
MP3
menu
track you selected last is
highlighted
on
Press 3/4 to select the track you want to start
6 playing.
move
Press MENU to
7
move
previous
on
the
menu screen.
list, press
on
on
the
menu screen.
press REPEAT
Off icon appears
on
the
a
third time.
menu screen.
a
Track from
1 Press PROGRAM
mode to enter the
E
The
Program
List
during playback or in
Program Edit mode.
the
page.
stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
to the next page.
to the
with
left.
menu
the program list.
Press TITLE to
icon appears
Repeat mode,
Repeat
Erasing
programmed
on
Tracks
All icon appears
Repeat
OFF
Press 2.
The
"Programmed Playback
the program
second time.
a
To cancel
The
5
3-7 of
repeat all tracks
Clear All
TRACK 8.MP3
menu.
repeat the track currently playing, press REPEAT.
The
TRACK 7.MP3
Clear All
TRACK 8
Audio CD
steps
REPEAT
TRACK 5
0:00:14
Follow
Audio CD and MP3 Disc"
Repeat Programmed
TRACK 1
Program
the
list.
CD
PROGRAM to exit the
on
3
place
or
erase
4 Press CLEAR.
Press PLAY to start.
The track will be erased from the
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Program
list.
Playback begins
Playback stops after
have played once.
all of the tracks
on
the
Program
list
Erasing
the
1 Follow
steps
List"
as
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
To
resume
are
for the disc will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
on
the
menu screen.
19
Additional Information
Last Condition
DVD
This
player
Controlling
Memory
VCD1.1
CD
Your remote control is
memorizes the last condition for the last disc
player
well
as
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
of
your DVD
operating
operate for your LG TV.
To switch the remote control mode
Notes
--
capable
limited functions of LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
ferent
--
as
Follow the instructions below to
you have watched. Settings remain in memory even if
you remove the disc from the player or switch off the
rized,
the TV
be
device),
sure
(to operate
to press the DVD
or
or
a
dif-
TV but-
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
2
The
POWER, CH(E/D), VOL (E/D), MUTE and
TV AV buttons
ate the
on
remote control
are
used to oper-
LG TV.
Screen Saver
The
DVD
screen saver
Player
in
appears when you leave the
mode for about five minutes.
picture
stop
Setting
Remote Control Codes for LG TV
This remote control
supports
two remote control
After the Screen Saver has been
for about five
codes for LG TV: Code 1 and Code 2.
minutes, the DVD Player will
turn itself off.
Code 1 is for LG TV with NTSC
engaged
automatically
Code 2 is for LG TV with PAL
Video Mode
With certain
ering
or
means
Setting
DVD
VCD2.0
VCD1.1
Vertical
interpolation
lines. That
on
straight
or
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video
about 3 seconds
mode, press and hold DISPLAY
playback. The new video
displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
during
shipped
multi
system.
from the
factory,
the remote
control is set to Code 1.
discs, the playback picture may be flick-
Dot Crawl is shown
When the unit is
or
system.
To set the remote control to Code 2, hold down both
the TV button and "2" number button on the remote
control.
(If the batteries in the remote control are
replaced while the remote control is set to Code 2,
the setting will revert Code 1.)
To set the remote control back to Code 1, hold down
both the TV button and "1" number button on the
remote control.
disc
mode number selected is
Video mode
change
MODE1
→
MODE2
MODE5
→
MODE1
→
sequence:
MODE3
→
MODE4
→
If you turn off the the power, the video mode will be
back to initial state (MODE1).
20
Note
If the remote control does not
TV, try
one
of the other code
originally supplied
Due to the variety
COMPANY cannot
will
operate your particular
or use
the remote control
with the LG TV.
of codes used
by manufacturer, OUR
guarantee that the remote control
operate every model of the LG TV.
Additional
Notes
on
Information(Continued)
MP3 Discs
About MP3
An MP3 file is audio data
compressed by using MPEG1,
layer-3 file-coding scheme. We call files that
have the ".mp3" file extension "MP3 files".
The player can not read an MP3 file that has a file
extension other than ".mp3".
The player can not read a fake MP3 file that has a
file extension ".mp3".
the audio
MP3 Disc
compatibility
limited
follows:
as
with this
player
4.
Sampling Frequency / only at 44.1kHz
Bit rate / within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
5.
A
1.
2.
3.
REF NC
is
-
Creator", which
single
creates
session disc
track. If there is
no
ISO9660 file
an
system.
MP3 files in the first
requires
MP3 file in the 1st
track, it
cannot
MP3 files. If you wish to playback MP3
format all the data in the disc or use a new
playback
files,
one.
6.
We do not recommend
use
7.
File
and
8.
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate ".mp3" extension
e.g. "********.MP3".
Do not use special letters such
]:;\/.,"
9.
Please
finished CD-R discs
as
or
less
"_?!><+*}{`[@
etc.
Total number of files
the disc should be less than
on
200.
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
Do not
use
80
software
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
are
optimal
automatically
many different types
CD-R containing
(including
files).
Customers should also note that
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has
mission. Permission should
copyright
right to grant such peralways be sought from the
no
owner.
21
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
(
the
)in
cord into the wall outlet
disc.
(Check that disc indicator
display window is lit.)
not work.
No
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
No sound.
securely.
securely.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
The audio cables
are
not connected
audio receiver
Turn
the
on
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The disc is
mode of the
so
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
is set to the
input
you can listen to the
sound from the DVD player.
securely.
Digital Audio Output
position.
jacks
the TV.
on
securely.
The
is
screen.
Connect the video cable into the
signal output.
playback picture
the TV
on
appears
The video cable is not connected
audio cable is not set to receive DVD
The
appropriate video input mode
the picture from the DVD
so
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
An
unplayable
disc is inserted.
Insert
a
(
the
)in
Insert
a
disc.
(Check that disc indicator
display window is lit.)
playable
disc.
(Check
the disc
type, color system and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
DVD
player.
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
There is
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
Operate the
23ft(7m).
player.
remote control within about
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
exhausted.
22
are
Replace
the batteries with
new ones.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sudanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
23
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
Afghanistan
ET
Spain
Ethiopia
LI
AF
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
HT
Haiti
NI
Nigeria
Nicaragua
TW
Canada
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
Cameroon
CN
Outlying
Islands
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
IQ
Iraq
PA
Panama
UZ
Uzbekistan
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
Republic
IO
Principe
Territories
CA
CF
Mayen
Islands
Anguilla
Guinea
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
24
Republic
Islands
(French)
State
(British)
(USA)
Specification
General
Power
Power
requirements
AC 110-240 V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X76.5X242mm(wxhxd)
2.8
(approx.)
kg
Operating temperature
5˚C to 40˚C
Operating humidity
5%to90%
(41˚F
to
REF NC
104˚F)
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
S-VIDEO OUT
Vp-p
(Y)
(C)
75
1.0 V
0.3 V
ohms, sync negative
(p-p), 75 Ω, negative
(p-p) 75 ohms
sync., Mini DIN
4-pin
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0Vrms(1kHz,0dB),330Ω,RCAjack(L,R)x1
x
1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
25
P/NO
:
3834RS0036E
Download PDF