LG | DV5522P | LG DV5522P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV5522P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
WARNING
Notes
OF ELECTRIC SHOCK
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
WARNING: TO REDUCE THE RISK
DO NOT REMOVE COVER
on
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
a
risk of electric
play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, the picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
is intended to alert the
important operating
within
an
equilateral triangle
to the presence of
user
and maintenance
(servicing)
accompanying the
instructions in the literature
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
manual
carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of
controls, adjustments
other than those
specified
or
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such
2
as
vases, shall be
placed
on
the
apparatus.
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
on
this unit. This number is
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
OperationwithAudioCDandMP3Disc.
PlayinganAudioCDandMP3Disc.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
Pause.............................18
MovingtoanotherTrack...............18
RepeatTrack/All/Off...................18
Search.............................18
Random...........................18
RepeatA-B.........................18
3DSurround........................18
.
RemoteControl............................7
RearPanel................................8
.18
ChangingtheAudioChannel.
ProgrammedPlayback.....................19
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Disc..........................19
Preparation
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
ProgrammedPlaybackwithVideoCD.
.
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation.
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.19
.19
AdditionalInformation...................20-21
LastConditionMemory...................20
ScreenSaver...........................20
VideoModeSetting......................20
ControllingtheTV.......................20
NotesonMP3Discs.....................21
Picture.............................12
Sound.............................13
Others(DRC/Vocal/PBC)...............13
ParentalControl......................14
Operation
Reference
Troubleshooting..........................22
LanguageCodeList.......................23
CountryCodeList.........................24
Specifications............................25
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
GeneralFeatures........................15
About the
symbols
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
Indicates hazards
SlowMotion.........................15
itself
.
.
.
.
.
Still Picture and Frame-by-Frame Playback 16
Repeat............................16
RepeatA-B.........................16
or
for instructions
likely to cause
damage.
harm to the unit
other material
.
TimeSearch........................16
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
3DSurround........................16
Zoom..............................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitle............................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
Chapter (DVD only)
Sections of a picture
(8cm/12cmdisc)
In
addition, this unit
can
play
or
a
SVCD, CD-R
Depending
ment
or
CD-RW
MP3 files.
on
the conditions of the
the CD-R/RW disc
or
discs cannot be
--
--
--
The unit cannot
itself,
played on the unit.
play the CD-R/RW
recording equipCD-R/RW
Track
(Video
Sections of
discs that do not
Scene
(the
irregular shaped CDs (e.g., heart-shaped
octagonal). It may result in malfunctions.
use
Some
on
DVDs and Video CDs
playback operations
On
piece
that
smaller
are
CD and audio CD
picture
or a
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
designed by the software manufacturer,
playback features of the unit may not be avail-
Types
There
of video CDs
are
two
disc content
some
a
audio CD. Each track is
or an
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Notes
musical
composed of one or several chapters. Each
assigned a chapter number, enabling you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
enabling
or
or a
is
contain any data, or contain different kinds of formatted data other than MP3 and CD-DA data.
Do not
enabling
easily.
A title is
chapter
some
feature content
than titles.
Notes
--
accompanying
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
that contains audio titles
(DVD only)
DVD
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
other functions may be added.
able,
Refer also to the instructions supplied with the DVDs
with the
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
system via
menus, search
functions,
or
still
other
pictures
included in
the disc.
code of the DVD player and DVDs
3
player is designed and manufactured
for playback of region "3" encoded DVD software. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled "3" or "ALL". If you
try to play any other discs, the message "Check Regional
Regional
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
Note
To avoid
is
prohibited by
on
area
limits.
DTS-encoded CDs
possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
4
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
Before Use
(Continued)
After
the unit
Handling
discs
Storing
Precautions
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
the unit
Cleaning
a
discs
insecticide spray,
the unit. Do not leave rubber of
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
strong solvents,
as
these
a
extremely dirty,
detergent
mild
such
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Display
Window
POWER
Switches the
player
Forward Skip/Scan ( T / R )
Go to NEXT chapter/track.
ON and OFF.
Press and hold for two seconds for
a
fast forward search.
Skip/Scan ( Q / S )
chapter/track or to PREVIOUS
chapter/track.
Reverse
Go to
beginning
of current
Press and hold for two seconds for
a
fast
search.
reverse
STOP(9)
Stops playback.
Pause
PAUSE(;)
playback temporarily / press repeatedly
for frame-by-frame playback.
PLAY(2)
playback.
Starts
Disc
Insert
a
Tray
disc here.
Display
Opens
or
OPEN/CLOSE
(
closes the disc
tray.
window
Shows the current status of the
/
)
Remote Sensor
Point the DVD
player.
Lights red when the power cord is plugged into the wall
Lights green when the player is in power on mode.
Lights red when the player is in Standby mode (off).
Player
remote control here.
power outlet.
?
?
Lights
when
a
disc is inserted
Lights during playback.
Lights during
random
playback.
Lights during repeat playback.
6
Remote Control
DVD/TV select button
Selects
OPEN/CLOSE
mode of remote
operational
Player
-
POWER
OPEN/CLOSE
-
DVD
DISPLAY
1
2
Select
-
-
DISPLAY
an
item in the
Select channel of TV and
ENTER
VOL
changes
TV AV
MENU
-
?
or
A-B
RANDOM ZOOM
MARKER SEARCH
*
angle
Accesses
or removes
setup
Marks any
Displays
MARKER SEARCH
Remote Control
?
if
?
Angle:
remote
all.
?
?
A-B
Repeat
?
?
?
sequence.
RANDOM
Plays
?
tracks in random order.
ZOOM
Enlarges
menu.
Point the remote control at the remote
remote
REPEAT
Repeat chapter, track, title,
Remote control
sensor
and press
the buttons.
AAA AAA
(7 m)
Program
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Operation Range
Distance: About 23 ft
or removes
CLEAR
?
point during playback.
SEARCH
Press and hold button for about
menu.
menu.
MARKER
Reverse SKIP/SCAN
Accesses
available
SETUP
track.
PROGRAM
?
language.
camera
)
chapter
two seconds.
language (DVD) or
audio channel (CD).
DVD
T
Search
a menu.
ANGLE
a
forward*/go
(
to next
( S )
backward*/go to beginning
of current chapter or track or go to
previous chapter or track.
?
REPEAT
audio
Selects
of the disc if
menu
?PLAY(2)
Starts playback.
0-9 number buttons
SUBTITLE
channel.
selection.
Forward SKIP/SCAN
Search
CLEAR
ForwardSLOW(.)?
Forward slow playback.
subtitle
input
menu
the Title
Displays
SKIP/SCAN
PROGRAM
STOP(9)?
Stops playback.
a
Selects AUX A/V
SLOW
AUDIO SUBTITLE ANGLE SETUP
Selects
video CD
a
available.
PAUSE(;)?
Pauses playback temporarily / press
repeatedly for frame-by-frame
playback.
an
menu.
of
TITLE
PLAY
ReverseSLOW(,)?
playback.
an
setup
menu
Acknowledges
PR./CH
SLOW PAUSE/STEP STOP
Reverse slow
Selects
the
SELECT/ENTER
TITLE
SKIP/SCAN
AUDIO
Removes the
Displays
VOL
DVD disc.
Selects numbered items in
turn off TV sound.
with PBC.
SELECT
menu
MENU
menu on a
-
PR./CH
volume of TV.
Accesses
RETURN
(left/right/up/down)
4
3
display
during
playback.
RETURN/TV AV
TV SOUND/MUTE
-
on-screen
Select 3D SURROUND
disc
ON and OFF.
This button is not available.
Accesses
tray.
SOUND/MUTE
POWER
Switches DVD
and closes the disc
Opens
control.
from the front of the
battery
video
image.
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
sensor.
with
the
rear
of
two R03
and
About 30° in each direction of the front of the
sensor.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
VIDEO OUTPUT Switch
Select either S-VIDEO OUT
VIDEO
OUT, depending
on
or
COAXIAL
COMPONENT
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
how you connected the
DVD Player to the TV.
COMPONENT VIDEO OUT
Connect to
OPTICAL
a
(Y Pb Pr)
inputs.
TV with Y Pb Pr
(Digital audio out jack)
digital (optical) audio
equipment.
Connect to
AUDIO OUT
Connect to
*System
Select switch
(Left/Right)
amplifier, receiver,
an
or
stereo
system.
DIGITAL
OUT
VIDEO OUT
AUDIO
OUT
Pr
L
Pb
R
COMPONENT
COAXIAL
DIGITAL
OUT
S-VIDEO
COMPONENT
VIDEO
OUTPUT
OPTICAL
Y
S-VIDEO
VIDEO
OUT
OUT
AC Power Cord
S-VIDEO OUT
Connect to
a
TV with S-Video
Plug
inputs.
into the power
source.
VIDEO OUT
Connect to
Dust
protection
a
TV with video
*
cap
Remove the dust
protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
inputs.
System
You
Select switch
enjoy
can
NTSC
Select when DVD
NTSC:
Select when DVD
Select when DVD
system
When the selected
coincide with the
picture
?
Set
off.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
player
is connected with
player
is connected with
NTSC-TV.
?
cap
by using System
appropriate system.
player is connected with
PAL-TV.
Multi
protection
PAL discs
PAL:
AUTO:
Dust
or
Select switch to choose the
System
system
may not be
System
TV.
Select switch does not
of your
TV, normal color
displayed.
Select switch when the power is turned
Connections
Tips
Depending
to
Rear of TV
on
your TV and other equipment you wish
are various ways you could connect
S-VIDEO
INPUT
connect, there
the
Use
player.
only
one
of the connections
Pr
Pb
VIDEO
INPUT
AUDIO INPUT
COMPONENT VIDEO INPUT
Y
L
R
L
described below.
PREATION
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
For better sound
the
AUDIO OUT
of your
reproduction, connect
jacks to the audio in jacks
player's
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
S
C
A
V
Caution
--
Make
the DVD
is connected
directly to
input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
Player
the TV. Tune the TV to the correct video
--
--
system.
DIGITAL
OUT
COAXIAL
AUDIO
OUT
Pr
L
Pb
R
DIGITAL
OUT
S-VIDEO
Connecting
Make
VIDEO OUT
COMPONENT
to a TV
COMPONENT
VIDEO
OUTPUT
OPTICAL
of the
following connections, depending
the capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
one
Y
S-VIDEO
OUT
VIDEO
OUT
on
Rear of DVD
player
set the VIDEO OUTPUT switch to COMPONENT.
When
using
the S-VIDEO OUT
jack,
set the VIDEO
OUTPUT switch to S-VIDEO.
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
supplied (V).
on
jack on
using
the TV
the DVD
Player
to
the video cable
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the supplied audio cables.
the DVD
TV
the
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
S-Video cable
2
jack
the TV
on
the DVD
using
the
Player
optional
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the supplied audio cables.
Component
Video
(Color Stream )
the
connection
Connect the COMPONENT VIDEO OUT
jacks on
Player to the corresponding in jacks on
using an optional Y Pb Pr cable (C).
the DVD
the TV
2
on
the DVD
TV
1
jack
(S).
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the supplied audio cables.
the DVD
TV
the
9
Connections
Connecting
(Continued)
Optional Equipment
to
Rear of DVD
player
DIGITAL
OUT
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
VIDEO OUT
AUDIO
OUT
Pr
L
Pb
R
COMPONENT
two
COAXIAL
DIGITAL
OUT
Connect the Left and
DVD
Player to the
amplifier, receiver,
audio cables (A).
Right
AUDIO OUT
jacks on the
right in jacks on your
system, using the supplied
S-VIDEO
audio left and
or
stereo
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
COMPONENT
OPTICAL
Y
VIDEO
S-VIDEO
OUTPUT
OUT
VIDEO
OUT
channel
1
O
X
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
OUT
You will need to activate the
2 (See "Digital
Audio
player's digital output.
Output" on page 13).
OPTICAL
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Digital
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--
A
To
see
screen
10
the audio format of the current DVD in the
display,
press AUDIO.
on-
L
R
AUDIO INPUT
Before
Operation
Caution:
Before
using
the remote
control, press the DVD
button to select the device to be
General
or
TV
gives
DVD
Some DVDs
numbers
General
screen.
playback
Temporary
2
TITLE
CHAPT
TRACK
can
the
setting
of
an
item.
be also be used for
number).
For
some
setting
functions,
setting.
Feedback Field Icons
Repeat
Title
Repeat Chapter
Repeat
Track
(non-PBC
Repeat
A-B
OFF
Repeat
Off
Resume
Action
display operation
Press DISPLAY
title
Repeat
displayed on the TV
changed on the menu.
be
(e.g.,
can
AB
be
can
change
All Tracks
ALL
Display
Some items
On-screen
1
basic instructions for
status
to
press SELECT/ENTER to execute the
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
or 2
The number buttons
operated.
Explanation
This manual
Press 1
3
play
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press
3 or 4
to select
an
The selected item will be
item.
highlighted.
DVD
Items
Title Number
1/3
Chapter
Number
Audio
language
Digital Audio
Output mode
0:16:57
1
ENG
and
Subtitle
language
Angle
D
6CH
OFF
1/1
Sound
NORM.
VCD2.0
Shows the current title number and total number of
to the desired title number.
Numbers SELECT/ENTER
1/2,or
Shows the current
chapters, and skips
chapter number and total number
to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
of
1/2,or
Numbers SELECT/ENTER
Numbers SELECT/ENTER
Shows the current audio soundtrack language,
encoding method and channel number, and
changes the setting.
1/2
Shows the current subtitles
changes the setting.
1/2
language, and
Shows the current angle number and total number of
angles, and changes the angle number.
1/2
Shows the current sound
changes the setting.
1/2
mode, and
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
Sound
Selection Method
titles, and skips
1/12
Time search
Function (Press 3/4 to select desired item)
0:16:57
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1/2,or
Numeric, SELECT/ENTER
Shows the
elapsed playing time (Display only)
--
STER.
Shows the audio channel, and
changes the audio channel.
1/2
NORM.
Shows the current sound
changes the setting.
1/2
mode, and
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Menu
Settings
Select
Personal Preferences
own
on
the
player.
Initial
General
Settings
you
Language
a
see
for the
language
setup
menu.
This is the
menu
when you press SETUP.
Operation
Disc Audio
Chinese
Disc Subtitle
English
Disc Menu
Rating
1
Press SETUP.
The
setup
Country
menu
TV
appears.
Menu
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Chinese
Polish
Audio
Audio
Digital
Output
Others
Italian
Language
Digital
Language
Spanish
Aspect
Menu
Code
Aspect
Output
Hungarian
Russian
Other------------
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
Press 3/4 to select the desired item.
above and below the
4:3 Panscan: Select when
screen
selected
will show the current
item,
well
as
as
setting for the
alternate setting(s).
3
4
While the desired item is
3/4 to select the desired
selected, press 2, then
setting.
Press SELECT/ENTER to confirm your
selection.
Some items
require
additional
Press SETUP, RETURN
5 setup
or
steps.
PLAY to exit the
Disc
language
a
for the disc's
Menu, Audio and
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 23. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Original
Disc Audio
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Spanish
Italian
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Russian
Others
12
4:3 Letterbox
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Country
Other------------
Code
Aspect
Language
Audio
con-
bars
conscreen.
16:9 wide TV is connected.
a
Disc Subtitle
Others
DVD
your TV
Disc Audio
Digital
Language
Select
Either
16:9 Wide: Select when
masking
standard 4:3 TV is
Displays pictures cropped to fill
sides of the picture are cut off.
Menu
Language
a
with
nected.
TV
menu.
standard 4:3 TV is
images
picture.
The
2
a
theatrical
Output
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
Set the
variety
output options.
player's Digital Audio Output according to the
type of audio system you
DRC, Vocal and PBC settings
can
be
changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
of audio
a
changed
use.
between On and Off.
PREATION
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipment with
a
equipment
decoder
or
with
a
DTS
amplifier.
The DVD
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
TV
Code
Aspect
Menu
Digital
Audio
Language
Audio
Output
Others
the
/PCM
Sample Freq.
48 KHz
Language
Code
Aspect
Digital
Rating
Country
PBC On
Menu
2 channel
digital
player outputs sounds in
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
stereo
Disc Menu
Country
MPEG decoder.
a
Vocal On
TV
decoder, Dolby Digital
PCM: Select when connected to
DRC On
Disc Subtitle
Rating
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
Disc Audio
96KHz
Dynamic Range Control (DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Output
Vocal
Others
Sample Frequency
To
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
13
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
applies
scenes on
to the
complete
the disc. These
disc
or
scenes are
Code
(See "Country
to
8
7
Disc Menu
6
Rating
5
Country
TV
Code
are
Menu
TV
Audio
2
Output
Others
1
Select
2
While
3
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create
2
While
3
Follow
4
Select the first character
Code
Country
the setup
6
using
the 3/4 buttons
a
rating from 1
(1) has the
to 8
using the 3/4 butplayback restrictions.
playback restrictions.
least
has the most
Eight (8)
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
played. Higher
unless
an
rated
alternative
scenes
scene
one.
If
no
will not be
is available
The alternative must have the
Code is selected, press 2.
Country
step 3 of "Rating"
cursor
using
on
left.
using
the 3/4 buttons.
1/2 buttons and select
3/4 buttons.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
Note
Confirmation of the
the code is
below
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
same
on
rating
Changing
the
1
Follow
2
Enter the old
3
Select
Steps
4-digit
1-2
as
code
shown above to the left
Change using
the 3/4 buttons then press
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
menu.
the disc.
or a
play-
If you
If you
forget your 4-digit
code
forget your password, to clear the current passfollow the procedure below.
word,
1
Press SETUP to
Press SELECT/ENTER to confirm your
2
Use the Number buttons to enter the
SETUP to exit the
time and veri-
played
suitable alternative is found,
5 selection, then press
(Rating).
code, then press SELECT/ENTER.
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
rating
display
the
setup
menu.
6-digit
number
"210499."
menu.
The
3
14
on
menu.
menu.
a
tons. One
lower
Select
then press SELECT/ENTER.
Select
be
Output
1
Shift the
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
4
Audio
5 the second character using
is selected, press 2.
personal 4-digit security password,
then press SELECT/ENTER. And enter the 4-digit
password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password,
Digital
Unlock
Change
"Rating"
Language
Others
1
Digital
Code
Aspect
Menu
3
Language
US
Rating
Country
4
Aspect
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Subtitle
were
to the list
List", page 24.).
Disc Subtitle
rated
The Parental Control feature allows
Disc Audio
whose standards
disc, referring
Disc Audio
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
country-dependent.
country/area
a
used to rate the DVD video
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
Operation
Playing
a
with DVD and Video CD
Playback Setup
Turn
on
VCD2.0
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
DVD
the TV and select the video
nected to the DVD
Audio
General Features
DVD and Video CD
on
input
the audio
source
Unless stated
otherwise, all operations
described
the remote control. Some
use
features may also be available
system
on
the
Setup
menu.
connected to the
Moving
player.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc tray.
When
Load your chosen disc in the tray, with the label
2 facing
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
3
a
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
disc has
another title
playback
Moving
DVD
appear
When
a
title
The
or
displayed
may be displayed first after
Video CD which contains a menu.
loading
a
DVD
Use the 1 2
3
4
buttons to select the
title/chapter
you want to view, then press SELECT/ENTER to start
playback.
Press TITLE
or
MENU to return to the
menu screen.
setting
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
menu screen.
You also may set PBC to Off under
13.
setup. See page
4-digit
code must
be entered and/or the disc must be authorized
"Parental
--
--
Control",
DVDs may have a
player will not
Your
different from your
player is 3 (three).
one
chapter
can move
or a
to another
(0-9).
(see
page 14).
region code.
press the buttons in
rapid
succession.
Slow Motion
player
DVD
T
or
VCD2.0
VCD1.1
during playback.
will enter SLOW mode.
2 Use the SLOW t
Notes
Rating settings (not authorized),
than
follows:
1 Press SLOW t
If Parental Control is set and the disc is not within the
the
more
track, you
one
two-digit numbers,
The
--
disc has
than
as
1/3
Note
For
menu screen.
and the exact
using
stopped, then
(0-9) to
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
Use the number buttons to select the track you want
to view.
Menu
is
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
buttons
VCD2.0
Press RETURN to return to the
to
Press SKIP/SCAN .
menu screen
DVD
playback
1/12
on a
more
chapter/track
is
title, you
can move
to another CHAPTER/TRACK
VCD1.1
disc has
a menu screen
one
follows:
as
Press DISPLAY when
instead.
If
than
more
press the appropriate numbered button
select a title number.
sure
does not start,
might
a
T to select the
or
t
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
T
on
play discs that have a region code
player. The region code for this
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
The
2 You
can
Frame-by-frame playback
Search
repeatedly
VCD2.0
DVD
during playback.
now
will
on
the TV
currently playing,
All icon appears
Repeat
3 To exit
by
The
the remote control.
1 Press and hold SKIP/SCAN .
player
repeat
The
screen.
press REPEAT
a
Repeat mode,
screen.
press REPEAT
Off icon appears
Repeat
the TV
on
on
the TV
a
third time.
screen.
Note
VCD1.1
two seconds
the disc
press REPEAT.
currently playing,
Track icon appears
second time.
on
The
the track
Repeat
now
PAUSE
Track/All/Off
Repeat
-
repeat
The
2 To
go into PAUSE mode.
advance the picture frame-by-frame
pressing
1 To
during playback.
will
player
Video CDs
(continued)
VCD1.1
1 Press PAUSE
(Continued)
On
> for about
or
Video CD with
a
setup
to
menu
use
PBC, you
the
must set PBC to Off
Repeat
on
the
function. See page 13.
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Repeat
A-B
VCD2.0
DVD
VCD1.1
to select the
3 To exit SEARCH
mode, press PLAY.
A*
To
AB
repeat
sequence in
a
A- appears
briefly
2 Press A-B
again
title:
the TV
on
starting point.
screen.
at your chosen end point.
on the TV screen, and the repeat sequence
appears on the player 's display).
begins (
VCD1.1
Karaoke DVD
a
1 Press A-B at your chosen
A-B appears
Random
OFF
briefly
3 To cancel the sequence, press A-B.
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
appears on the display window.
The unit
2 To return to normal
disappears
on
playback, press RANDOM
display window.
until
Time Search
0:16:57
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
the
1 Press DISPLAY
Tips
By pressing SKIP/SCAN . or > during Random
playback, the unit selects another title (track) and
resumes Random playback.
play
appears
on
The
during playback.
the
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
Search icon in the
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Note
This function
only
works with DVD Karaoke discs and
3 Within 10
video CD without PBC.
the
seconds,
required
onds from left to
Repeat
CHAPT
VCD2.0
DVD
the number buttons to enter
right
hours, minutes and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
TRACK
TITLE
use
start time. Enter
OFF
4 Within 10
seconds, press SELECT/ENTER
to confirm
the start time.
DVD Video Discs
1 To
repeat
the
-
Repeat Chapter/Title/Off
currently playing chapter,
Playback
an
press
invalid
starts from the selected time
on
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
screen.
repeat the title currently playing, press REPEAT
second time.
The
Repeat
3 To exit
The
Repeat
3D Surround
This unit
Title icon appears
Repeat mode,
a
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
can
DVD
produce
a
NORM.
3D SUR
3D Surround
simulates multi-channel audio
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
2 To turn off the 3D Surround
again
to select "NORM".
or
system.
1 Press SOUND to select "3D SUR"
16
effect, which
playback
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
VCD1.1
during playback
or
still
playback
If you press ZOOM repeatedly, the
increases up to six times.
discs: Menus
to acti-
zoomed
move
through
normal
resume
playback
DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or,
the
or
use
the 1/2/3/4 buttons to
return to
paused image.
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
Note
The
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
DVD
VCD2.0
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
your selection,
highlight
then press SELECT/ENTER.
picture.
3 Press CLEAR to
the
level
magnification
DVD
the contents of DVD Video
Checking
vate the Zoom function.
2 Use the 1/2/3/4 buttons to
DVD Features
Special
(continued)
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
(Continued)
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
1
a
on a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
to
1/1
recorded at different
different
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
will start from the Marked
Changing
num-
a
angle
camera
appears
the
on
a
display.
1
the Audio
Language
DVD
ENG
D
6CH
3 Press SELECT/ENTER.
Press AUDIO
scene.
ferent audio
remove
scenes
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
4 To
DVD
again.
press SEARCH.
2 Within 10
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press MENU
If the disc contains
briefly.
screen
is
menu
remove
the MARKER SEARCH menu, press
repeatedly during playback
language or audio track.
to hear
a
dif-
SEARCH.
Subtitles
To clear
a
DVD
1
ENG
Marked Scene
Press SUBTITLE
1
During
disc
playback,
The MARKER SEARCH
2
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to
see
the
Press 1/2 to select the Marker number that you want
to
3
press SEARCH.
Note
erase.
If
Press CLEAR.
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3 Disc
Operation
Playing
Audio CD and MP3 disc
an
The DVD
Player
CD-ROM,
CD-R
Before
recordings
on
read the notes
recordings,
on
MP3
page 21.
CD
1 Press and hold SKIP/SCAN .
CD-RW discs.
or
MP3
playing
Recordings on
MP3 formatted
play
can
Search
two seconds
during playback.
The
now
player
will
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
>
or
repeatedly
to select the
Insert
1
The
a
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
disc and close the tray.
appears on the TV screen.
menu
CD
3 Search
MP3
Program
speed
Program
TRACK 1
TRACK 1.MP3
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
and direction
are
indicated
on
the
menu screen.
4 To exit SEARCH
mode, press PLAY.
TRACK 7.MP3
TRACK 7
Clear All
TRACK 8
STER.
0:56:35
Audio CD
Clear All
TRACK 8.MP3
56:35
NORM.
MP3
menu
Random
OFF
1
CD
1 Press RANDOM
menu
during playback
or
when
playback
is
stopped.
Press 3/4 to select
2 Playback
will
Playback
3
To
The unit
track then press PLAY.
a
automatically begins
RANDOM
starts.
stop
stop playback
at the end of the disc.
at any other
or
time, press STOP.
2 To return to normal
until RANDOM
window and
1 Press PAUSE
Repeat
during playback.
playback,
press PLAY
or
press PAUSE
to another Track
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
case
or
of audio
CD,
2 To
briefly
to
step back
to
directly to any track, enter
the numbered buttons (0-9)
Repeat
The
Repeat
Repeat
icon and "A
-"
appears
the
on
menu screen.
at your chosen end point.
icon and "A B" appears on the menu screen,
again
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
Repeat
icon and "OFF" appears
3D Surround
on
the
play,
press
menu screen.
MP3
CD
Track icon appears
on a
on
the
can
CD
produce
a
3D Surround
menu screen.
disc, press REPEAT
a sec-
Repeat mode,
on
the
menu screen.
press REPEAT
Off icon appears
on
the
a
from two
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
again
or
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
All icon appears
effect, which
playback
conventional stereo
during playback.
effect, press SOUND
to select "NORM".
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT or RIGHT).
ferent audio channel
18
press A-B at your chosen start-
simulates multi-channel audio
ond time.
The
sequence.
Repeat
This unit
repeat the track currently playing, press REPEAT.
3 To cancel
CD
to go
using
repeat all tracks
a
and the sequence
The
Repeat Track/All/Off
Repeat
repeat
The
to return to the
during playback.
The
menu screen.
A-B
2 Press A-B
track.
the track number
1 To
and
window and
playback, press RANDOM repeator
disappears on the display
During disc playback,
ing point.
The
MP3
CD
briefly during
playback to go to the next track
beginning of the current track.
the
To
1
again.
Moving
display
Playback
MP3
CD
2 To return to
Random
the
menu screen.
edly
Pause
appears
on
CD
dif-
Programmed Playback
Programmed Playback
MP3
CD
with Audio CD
VCD2.0
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
tracks for
On
a
The
(Audio CD)
or
is
displayed
on
the TV
2
screen.
during playback or in
the Program Edit mode.
mode to enter
on
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
Press PROGRAM while
The VCD
Program
the stop
menu
playback
is
OPERATION
stopped.
will appear.
VCD
Program
E
TRACK 1
E
The
menu
Insert Video CD and close the tray.
1
menu
Video CD with
60 tracks
Press PROGRAM
2
a
setup
Insert the disc and close the tray.
1
with Video CD
Programmed Playback
and MP3 Disc
Program can
(MP3 disc).
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
TRACK 2
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Press PROGRAM to exit the
E
mark will
3
4
Edit
Program
mode; the
disappear.
Note
Press 3/4 to select
track then press
SELECT/ENTER to place the selected track
the
Program
Press RETURN
a
to
3
place
additional tracks
on
Program
E
MP3
TRACK 1.MP3
TRACK 8.MP3
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
Follow
menu.
steps 3-7 of "Programmed Playback with
Audio CD and MP3 Disc"
To
E
left.
on
To
Tracks
repeat the track currently playing, press REPEAT.
The
Track icon appears
Repeat
repeat all tracks
REPEAT
TRACK 5.MP3
TRACK 6
Program
the
Program
TRACK 12
TRACK 2
TRACK 5
the
on
menu screen.
the program
second time.
a
list, press
on
TRACK 6.MP3
TRACK 7
The
TRACK 7.MP3
Clear All
TRACK 8
0:00:14
STER.
NORM.
To cancel
56:35
OFF
1
Audio CD
MP3
menu
menu
All icon appears
Repeat
Clear All
TRACK 8.MP3
The
Repeat mode,
a
Track from
1 Press PROGRAM
Press 2.
programmed
track you selected last is
highlighted
on
Press 3/4 to select the track you want to start
Press MENU to
E
The
6 playing.
Press TITLE to
mode to enter the
move
move
to the next page.
to the
previous
page.
the
on
the
on
have
played
once.
a
third time.
menu screen.
Program
List
during playback or in
Program Edit mode.
the
stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Press PLAY to start.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
menu screen.
press REPEAT
Off icon appears
Repeat
Erasing
the program list.
7
PROGRAM to exit the
Repeat Programmed
TRACK 1
The
or
on
list.
Repeat step 3
Program list.
CD
5
Clear All
TRACK 8
Note
the
Erasing
1 Follow
List"
steps
Program
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
as
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
To
resume
are
for the disc will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
on
the
menu screen.
19
Additional Information
Last Condition
DVD
This
CD
player
Controlling
Memory
VCD1.1
Your remote control is
player
memorizes the last condition for the last
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
rized,
as
well
capable
of
your DVD
operating
limited functions of LG TV.
operate for your LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
To switch the remote control mode
Notes
--
as
Follow the instructions below to
ferent
--
the TV
be
device),
sure
(to operate
to press the DVD
or
or
dif-
a
TV but-
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
2
The
POWER, CH(E/D), VOL (E/D), MUTE and
TV AV buttons
ate the
on
remote control
are
used to oper-
LG TV.
Screen Saver
The
screen saver
DVD
Player
in
picture
appears when you leave the
stop mode for about five minutes.
Setting
Remote Control Codes for LG TV
This remote control
supports
two remote control
After the Screen Saver has been
for about five
codes for LG TV: Code 1 and Code 2.
minutes, the DVD Player will
turn itself off.
Code 1 is for LG TV with NTSC
engaged
automatically
Code 2 is for LG TV with PAL
Video Mode
With certain
ering
or
Setting
DVD
VCD2.0
VCD1.1
on
straight
lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video
about 3 seconds
mode, press and hold DISPLAY
playback. The new video
displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
during
shipped
multi
system.
from the
factory,
the remote
control is set to Code 1.
discs, the playback picture may be flick-
Dot Crawl is shown
When the unit is
or
system.
To set the remote control to Code 2, hold down both
the TV button and "2" number button on the remote
control.
(If the batteries in the remote control are
replaced while the remote control is set to Code 2,
the setting will revert Code 1.)
To set the remote control back to Code 1, hold down
both the TV button and "1" number button on the
remote control.
disc
mode number selected is
Video mode
change
MODE1
→
MODE2
MODE5
→
MODE1
→
sequence:
MODE3
→
MODE4
→
If you turn off the the power, the video mode will be
back to initial state (MODE1).
20
Note
If the remote control does not
TV, try
one
of the other code
originally supplied
Due to the variety
COMPANY cannot
will
operate your particular
or use
the remote control
with the LG TV.
of codes used
by manufacturer, OUR
guarantee that the remote control
operate every model of the LG TV.
Additional
Notes
on
Information(Continued)
MP3 Discs
About MP3
An MP3 file is audio data
compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
files that have the
The
player
can
".mp3"
extension other than
The
player
can
file extension
file extension "MP3 files".
not read
an
not read
a
compatibility
limited
fake MP3 file that has
a
follows:
with this
player
is
4.
Sampling Frequency / only at 44.1kHz
Bit rate / within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
5.
A
1.
2.
3.
REF NC
file
a
".mp3".
MP3 Disc
as
MP3 file that has
".mp3".
-
Creator", which
single
track. If there is
not
creates
session disc
no
an
ISO9660 file
MP3 file in the 1st
MP3 files. If you wish to
format all the data in the disc or
playback
files,
system.
MP3 files in the first
requires
track, it
can-
playback
MP3
use a new
one.
6.
We do not recommend
use
7.
File
and
8.
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate ".mp3" extension
e.g. "********.MP3".
Do not use special letters such
]:;\/.,"
9.
Please
finished CD-R discs
as
or
less
"_?!><+*}{`[@
etc.
Total number of files
on
the disc should be less than
200.
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
Do not
use
80
software
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
optimal
automatically
many different types
CD-R containing
are
(including
files).
Customers should also note that
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright
owner.
21
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
(
the
)in
cord into the wall outlet
disc.
(Check that disc indicator
display window is lit.)
not work.
No
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
No sound.
securely.
securely.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
The audio cables
are
not connected
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
The power of the equipment connected
with the audio cable is turned off.
Turn
is set to the
the
on
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The disc is
so
Connect the audio cable into the
securely.
Digital Audio Output
position.
jacks
the TV.
on
securely.
The
is
screen.
Connect the video cable into the
signal output.
playback picture
the TV
on
appears
The video cable is not connected
audio cable is not set to receive DVD
The
appropriate video input mode
the picture from the DVD
so
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
An
unplayable
disc is inserted.
Insert
a
(
the
)in
Insert
disc.
(Check that disc indicator
display window is lit.)
playable
a
disc.
(Check
the disc
type, color system and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
player.
There is
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
player.
the remote control within about
Operate
23ft(7m).
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
exhausted.
22
are
Replace
the batteries with
new ones.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sudanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
23
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
24
Republic
Islands
(French)
State
(British)
(USA)
Specification
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X76.5X242mm(wxhxd)
2.8
(approx.)
kg
Operating temperature
5˚C to 40˚C
Operating humidity
5%to90%
(41˚F
to
REF NC
104˚F)
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
S-VIDEO OUT
Vp-p
(Y)
(C)
COMPONENT VIDEO OUT
75
1.0 V
ohms, sync negative
(p-p), 75 Ω, negative
(p-p) 75 ohms
0.3 V
sync., Mini DIN
(Y) 1.0 V (p-p), 75 Ω, negative sync.,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack
RCA
x
jack
4-pin
x
1
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
5 V
Audio
output (analog audio)
2.0Vrms(1kHz,0dB),330Ω,RCAjack(L,R)x1
75 Ω,
Optical
connector
x
1
2
Audio
(p-p),
x
1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
25
P/NO
:
3834RS0034U
Download PDF

advertising