LG | TD-C8066S | LG TD-C8066S Owner’s Manual

OWNER’S MANUAL
LG DRYER
Please read this manual carefully before operating
your dryer and retain it for future reference.
TD-C8066S
MFL67653046
www.lg.com
Features
Big Capacity Drum
The big capacity drum on this LG dryer allows you to dry more
washing at once, saving time!
Energy
Lower Energy Consumption
LG dryers use less energy than conventional dryers due to the cuttingedge technology we have applied to the drying system and to the heat
control mechanism. This LG Dryer has been designed to save you money.
Reduced Drying Times
save
Drying times are now shorter due to the efficient air flow mechanism
and optimised heater on this LG Dryer.
Reduced noise levels
We have reduced the operating noise of this LG dryer by using
innovative sound-absorbing and noise-screening technologies,
making it much quieter than conventional dryers.
Steam Refresh
LG’s steam technology allows you to inject fabrics with a swirling
jet of hot steam to refresh clothes, reduce static, and make
ironing easier. Simply select the Steam Refresh cycle, or you can
add a steam option to selected cycles.
Easy of Use
The wide, electronically controlled LED display on this machine
is very easy to use. Simply select the cycle you require
and your LG dryer will do the rest. SmartDiagnosis™ is available.
Contents
Safety Instructions ...............3
Technical Data ....................31
Installation Instructions ........6
Warranty ...............................32
Appearance & Design .........12
Operating Your Dryer ..........13
Additional Functions...........19
Caring for Your Dryer..........21
Additional Tips for
Smart Use.............................25
Troubleshooting Guide .......28
2
Safety Instructions
For your safety, the information in this manual must be followed to minimise the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury or death.
WARNING
• Serious injury or death may occur when not observing the following rules.
• It is strictly forbidden to use the product for anything other than the manufacturer
authorised usage. LG doesn't take full responsibility for the damage by inaccurate and
improper usages.
• Do not repair or replace any part of the dryer or attempt any servicing unless specifically
recommended in the user-maintenance instructions or published user-repair instructions
that you understand and have the skills to carry out.
WARNING
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
For use in Europe:
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless
continuously supervised.
Hazards
• Before plugging in the power cord, make sure cord is earthed and connected to circuit breaker.
No earthing may cause breakdowns or an electric shock.
• Do not plug into an adaptor. Do not use with an extension lead.
Abnormal heating of outlet may cause a fire.
• Do not remove the top plate when installing the dryer.
• Do not modify this product.
May cause breakdown, fire or electric shock.
• Keep the dryer away from cookers, naked flames, or any other inflammable objects.
May cause fire or parts to melt.
• Do not use a damaged power cord or place heavy objects on the cord.
A damaged power cord may cause fire or electric shock.
3
Safety Instructions
• Do not touch the plug or switch on with wet hands.
May cause electric shock.
• Disconnect the power cord by grasping the plug, not the cord.
May cause damage of cord resulting in fire or electric shock.
• Wipe dirt and stains from the power cord and insert the plug firmly into the socket.
Dirt and poor connections may cause fire.
• Do not use if power cord, plug or socket is damaged.
May cause fire or electric shock.
• Do not install or store the dryer where it will be exposed to the weather.
May cause fire, electric shock or malfunction.
• Do not use an extension cord or an adaptor to connect the power cord.
May cause fire or electric shock.
• Do not splash water on to the dryer.
May cause fire or electric shock.
• Unplug the power cord when cleaning or not using the dryer.
Water or dirt may cause an electric shock.
• Do not allow children or pets to play on or inside the dryer.
• The appliance is not intended for use by young children or infirm people without supervision.
• Keep pets away from the dryer.
Pets may damage the dryer, or may receive an electric shock.
• Do not depress buttons using sharp implements such as knives and screwdrivers.
May damage the dryer or cause electric shock.
• Do not dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible
or explosive substances (such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.).
May cause fire or explosion.
• Do not place flammable items near the dryer.
May cause toxic gases, parts damage, fire or explosion.
• Before the appliance is removed from service or discarded, disassemble the door and cut off the
power cord to prevent the future use.
May cause accident and injury.
• The packaging is not a toy. Destroy after opening.
To avoid the possibility of suffocation, keep the packaging away from babies and children.
• If this appliance is supplied from a cord extension set or an electrical connector, the portable
outlet device must be positioned so that it is not subject to splashing or moisture.
It may cause an electric shock, a fire, malfunction or deformation.
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and
should not be placed in a tumble dryer.
• Items
that have been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and
wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/gasoline,
dry cleaning solvents or other flammable or explosive substances should not be used in a tumble
dryer.
May cause spontaneous combustion leading to explosion and fire.
4
Safety Instructions
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom rugs,
nonslip mats or raincoats) should not be dried in a tumble dryer on a heat setting.
• Items
such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with foam
rubber pads should not be dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Plastic articles such as shower caps or waterproof nappy covers should not be placed in a tumble
dryer.
May cause spontaneous combustion leading to explosion and fire.
• If dryer is installed on a carpet, damage may be caused to it by ventilated air.
May cause spontaneous combustion leading to explosion and fire.
• Fabric
softeners, or similar products, should be used as specified by the
fabric softener instructions.
• The tumble dryer is not to be used if industrial chemicals have been used
for cleaning
• Remove all objects from pockets such as lighters and matches.
• Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
• To reduce the risk of personal injury, adhere to all industry recommended safety procedures
including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage,
personal injury or death.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a lockable
door, a sliding door or a door with a hinge on the
opposite side to that of the tumble dryer, in such a way
that a full opening of the tumble dryer door is
restricted.
•
• Do
not dry unwashed items in the tumble dryer.
stop a tumble dryer before the end of the drying cycle unless all
items are quickly removed and spread out so that the heat is dissipated.
• The lint trap has to be cleaned frequently, if applicable.
• Lint must not to be allowed to accumulate around the tumble dryer.
• Filter must be cleaned after every cycles are completes.
• Never
5
Installation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the
preparation and use of your dryer, and it is important that you review this entire manual
before proceeding with any installation or use. Be sure to observe all listed warnings and
cautions. These installation instructions are intended for use by qualified installers. Read
these installation instructions completely and carefully.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t
try to lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the
door, they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or
cables.
Check the dryer for damage occurred
during transportation.
Do not connect the dryer if it has visible
signs of damage.
If you are not confident, contact your local
LG agent. Always empty the dryer
completely before transporting it.
Your dryer should not be located near to a
gas hob, cooker, heater or grill, as flames
from the burners could damage your dryer.
When the dryer is fitted beneath a work
surface, allow 30cm~50cm space at either
side of the dryer and at the back of the dryer
to allow air to exit the rear grill. This air flow
is critical for condensation of water during
the drying process.
If you use this dryer near or stacked on top
of your washing machine, separate main
plugs and sockets must be used for each
appliance. Do not use a 2-way adaptor or
extension lead.
You can stack the dryer on top of your
washing machine to save space. A stacking
kit is available from your local appliance
specialist.
■ Stacking Installation Instructions
Your LG dryer can be placed on top of a front loading washing machine and securely fixed
with a stacking kit (see following page for instructions). This installation must be conducted
by an experienced installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing
machine and will ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulations are
dangerous. Any of these could result in an electric shock or fire. Periodically examine
the cord of your appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, trapped in a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
6
Installation Instructions
Stacking Kit
In order to stack this dryer an LG stacking
kit is required.
Dryer
Washer
This dryer may only be stacked on top of an
LG washer. DO NOT attempt to stack this
dryer on any other washer, as damage,
injury or property damage could result.
WARNING
• Incorrect installation can cause serious
accidents.
• The weight of the dryer and the height
of installation makes the stacking
procedure too risky for one person.
This procedure should be performed by
2 or more experienced service
personnel.
• The dryer is not suitable for a built-in
installation. Please do not install as a
built-in appliance.
• Do not operate if the dryer is
disassembled.
3. Align the stacking kit holes and the rear
cover holes.
3-1) 23.6 inch(600mm)
Washer Top plate size
Shape
and
assembly
direction
21.7 inch
(550mm)
23.6 inch
(600mm)
Installation Procedure
1. Place the LG dryer on the LG washing
machine.
2. Remove the two screws from the bottom
of the rear cover on each side as
illustrated below.
3-2) 21.7 inch(550mm)
• Fasten the 2 screws that were removed
earlier from dryer to stacking kit.
• Use 4 screws in accessory box
[0.6inch(16mm)] to assemble washer rear
cover and stacking kit.
• The procedure for the opposite side will be
the same.
7
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with an earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local standards.
NOTE
- For better drying performance,
please keep the rear of the product
away from the wall.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumbles dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
Wall
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
30cm~50cm
WARNING
The dryer should not be installed next to
a refrigeration appliance.
Do not install the dryer next to a
high-temperature appliance, such as
a refrigerator, oven or stove etc.
which can affect drying performance
and duration.
The dryer works best at a room
temperature of 23°C.
8
WARNING
Avoid installing the product around a
heat source.
The warm air venting from the rear side
of the dryer must be well ventilated.
If not, this can bring on problems.
Installation Instructions
■ Level the Dryer
1. Levelling the dryer prevents unnecessary
noise and vibration. Place your dryer on a
solid, level floor.
Place the dryer in an area free from
flammable materials, condensation and
not liable to freezing.
2. If the dryer is not properly level, adjust
the front levelling feet as necessary.
Turn them clockwise to raise and
counter-clockwise to lower until the dryer
no longer wobbles, both front-to-back,
side-to-side and corner-to-corner.
Adjustable Feet
Dryer is raised
Adjustable
Feet
Dryer is lowered
Adjustable
Feet
Diagonal Check
When pushing down the edges of the
machine, the machine should not move up
and down at all (Please check both
directions).
If the machine rocks when pushing the
machine top plate diagonally, adjust the feet
again.
9
Installation Instructions
■ Connecting the water supply hose
The dryer must be connected to the cold water tap using the new water supply hose. Do
not use old hoses.
NOTE
• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2).
• Do not strip or cross-thread when connecting inlet hose to the valve.
• If the water supply pressure is more than 1000 kPa, a decompression device
should be installed.
• Periodically check the condition of the hose and replace the hose if necessary.
Periodically inspect and replace hoses if bulges, kinks, cuts, wear or leaks are found.
Step 1 : Check rubber seal in the inlet
hose.
Two rubber seals are supplied with the
water inlet hoses.
They are used for preventing water leaks.
Make sure the connection to the tap is
sufficiently tight.
Hose
connector
Rubber seal
Y connector
Short
hose
Y connector
Step 2 : Check the installation
environment.
A type
-. When using both washer and dryer with
one water tap.
Assemble Y connector and short hose.
Connect the female part of the short
hose to the water tap.
Connect the male part of Y connector to
the female part of the long hose.
Connect another male part of Y
connector to the female part of the inlet
hose of washer.
B type
-. When using only the dryer from one tap.
Connect the female part of the long
hose to the water tap.
Long
hose
A
B
NOTE
• After connecting the inlet hose to
water tap, turn on the water tap to
flush out foreign substances (dirt,
sand or sawdust) in the water lines.
Let water drain into a bucket, and
check the water temperature.
10
Installation Instructions
Step 3: Connect hose to dryer.
• Connect the water supply hoses to the
COLD water tap tightly by hand and then
tighten another 2/3 turn with pliers.
Make sure that there are no kinks in the
hose and that they are not crushed.
Step 4 : Turn on the cold water tap.
Check for leaks.
Check that the water taps are turned on.
Check for leaks around “Y” connector,
tap, and hoses.
NOTE
• After completing the connection, if
water leaks from the hose, repeat
the same steps.
11
Appearance & Design
■ Product Layout
- TD-C8066S
Control
Panel
Water
Container
Door
Condenser
Cover
Air Ventilation
Grill
■ Control Panel
SmartDiagnosis™ function is
available only for the products
with a SmartDiagnosis™ mark.
Options
• Time Delay
• Anti Crease
• Favorite
• Buzzer
Additional
programme
Power
Start/Pause
Cycle selector
12
(More)
•
• Steam
• Spin Speed
• Drum Light
• Dry Level
(*Child Lock)
(Less)
•
Operating Your Dryer
■ Cycle Selection Table
Sensor Dry Cycle
Cycle
Cotton
Mixed
Fabric
Easy
care
Laundry Type
Detail
Dry
Level
Towels, dressing gowns and
bed linen
For thick and quilted fabrics
Extra
Terry towels, tea towels,
towels and bed linen
For thick and quilted fabrics that
do not need to be ironed
Very
Bath towels, tea towels,
underwear and cotton socks
For fabrics that do not need to be
ironed
Cupboard
Sheets, pillowcase and
towels
For fabrics that do not need to be
ironed
Light
Bed linen, table linen, towels,
T-shirts and polo shirts
For fabrics that do need to be
ironed
Iron
Bed linen, table linen,
tracksuits, anoraks and
blankets
For thick and quilted fabrics that
do not need to be ironed
Very
Shirts and blouses
For fabrics that do not need to be
ironed
Cupboard
Trousers, dresses, skirts and
blouses
For fabrics that do need to be
ironed
Shirts, T-shirts, trousers,
under-wear and socks
For polyamide, acrylic, and
polyester that do not need to be
ironed
Cupboard
Shirts, T-shirts, under-wear,
anoraks and socks
For polyamide, acrylic, polyester
that do need to be ironed
Iron
Iron
13
Operating Your Dryer
Sensor Dry Cycle
Cycle
Laundry Type
Bulky Item Bed clothes, sheets
Detail
Dry
Level
For bulky items
-
Jeans and colour fading
garments.
For jeans which do not need to be
ironed
-
Steam
Hygiene
Comforter bedding and
Children’s clothing
Sanitising non washable items
quickly and easily using the power
of steam alone.
Recommend to use this cycle for
cotton and polyester material.
Steam
Refresh
Shirts and blouses
Crease release of fabric
Fabrics are not dried completely.
Hang up fabrics!
-
Sports
Wear
Soccer kit and training wear
For polyester material
-
Jeans
-
Linen and towels, excluding
For small loads of suitable fabrics
Quick Dry fabrics applied to delicate,
sports wear, bulky Item cycle. with short drying times
-
Delicate
Silk, fine fabrics and lingerie
For fabrics that are heat-sensitive
like synthetic fabrics
-
Wool
Wool
For wool fabrics
-
Timed Drying Cycle
Rack Dry
Silk, wool, delicate lingerie
Refresh clothes without tumble
drying
-
Cool Air
All fabrics that need
refreshing
Tumbles without heat
-
Warm Air
Bath towels, bath robes,
dishcloth and quilted fabrics
made of acrylic
Small items & damp clothing
Everyday items suitable for heat
drying
-
CAUTION
If the load is less than 1kg, please use the “Warm Air” Cycle in timed Drying Cycle.
Wool items should be dried using the “Wool” Cycle and heat-sensitive fabrics including
silk, underwear and lingerie should be dried using the “Delicate” Cycle. Please comply
with the recommended laundry load when you select your desired cycle found on page
25,26, otherwise your clothes may be damaged.
14
Operating Your Dryer
■ Please read before using your LG dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG
dryer is correctly installed and ready for use. (See installation instructions.)
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG
dryer until the machine is balanced.
2. Check the water container, filter, control panel and drum to make sure everything is in
place.
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any
odours from the interior of the LG dryer to disperse.
NOTE
The final part of a tumble dryer cycle occurs without heat (cool down cycle) so that
the items are left at a temperature to ensure that the items will not be damaged.
Turn the
power on.
1. Turn the power on.
First, press the ‘‘Power’’ button. The
indicator light above the button will
become illuminated indicating that the
machine is all set to run.
2. Open the door.
3. Check the filter and water container
are clean.
The filter is inside the door rim or in the
back of the door. It needs to be cleaned
before and after drying.
Open the door and check the filter is
clean. If not, please clean it referring to
page 21. Also check if the water
container need to be emptied for better
drying results.
4. Place laundry into the drum after
sorting.
The clothes should be sorted by fabric
type and dryness level and all the strings
and belts of clothes should be well tied
and fixed before being put into the drum.
Push the laundry to the back to keep it
away from the door seal.
If not, the door seal and clothes may be
damaged.
Pull
Push
Open the
Door.
Glass Door Opaque Door
Check the
filter.
15
Operating Your Dryer
5. Close the door.
Before you close the door, make sure
fabrics are well placed inside and that
foreign objects, especially flammable
ones, are not caught around the door.
CAUTION
Be careful not to trap laundry between
the loading door and rubber seal.
Glass Door Opaque Door
6. Select the drying cycle you want.
You can choose a cycle by turning the
cycle selector knob until the required
cycle is indicated.
If you press Start/Pause button without
choosing a cycle, the dryer will proceed
with the Cupboard cycle. Please refer to
Cycle Selection table (page 13,14) for the
detailed information.
Select the
desired
cycle.
7. Press the start button.
You will hear the drum rotating.
Take out
the laundry.
8. After the cycle has finished, open the
door and remove the laundry.
CAUTION
Be careful! The drum inside could still be
hot.
(Operation time varies depending on your
cycle selection or options.)
16
Operating Your Dryer
NOTE
The final part of a tumble dryer cycle
occurs without heat (cool down
cycle) to ensure that the items are left
at a temperature that will not damage
them.
Clean the
filter.
(Replace
the filter if it is
damaged.)
9. Clean the filter and empty the water
container.
The filter should be cleaned after each
load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
CAUTION
- Take care if using a vacuum cleaner to
clean the filter, as it is easily damaged
and torn. If there is a residue build up
on the filter, scrub the filter with a brush
to remove.
- If you want to open the door while the
dryer is operating, please press the
Start/Pause button first, wait until the
drum completely stops and then open
the door.
CAUTION
This dryer must not be used for
purposes other than those for which it
was designed.
17
Operating Your Dryer
■ Rack Dry
The drying rack is placed inside the dryer as
seen in the picture below. Remove and
discard packing material before use.
The Rack Dry is designed for use with items
that you do not want to tumble dry including
sweaters and delicate fabrics.
To use the Drying rack :
1. Open the door.
NOTE
Check the lint filter and remove any lint
accumulated from items dried on the
rack.
1. Insert wire
edge to the
drum
centre.
2. Do not remove the filter.
3. Place drying rack over the bottom of
the dryer door opening.
Reset the rack on the dryer back
lodge.
Push down on the frame front to
secure over filter.
4. Place wet items on top of the rack.
Allow space around items for air to
circulate.
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
18
2. Place
delicate
fabrics or
sportshoes.
Additional Functions
Option
buttons
Power
Cycle
selector
Start/Pause
Power
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Cycle selector
• Cycles are available according to the
laundry type.
• The lamp will light up to indicate selected
cycle.
Additional
programme buttons
Additional programme
• Use these buttons to select the desired
options for the selected cycle.
Options
• This allows you to select additional options
and will light up when selected.
Start/Pause
• This Start/Pause button is used to start the
dry cycle or pause the dry cycle.
• Press The Start/Pause button to stop the
cycle temporarily.
• When in Pause, the power is turned off
automatically after 4 minutes.
19
Additional Functions
■ Time Delay
You can use the Time Delay option to delay
the finishing time of the drying cycle.
Maximum Time Delay is 19 hours.
Minimum Time Delay is 3 hours.
1. Turn the dryer on.
2. Select a cycle.
3. Set time delay hour by pressing the
“ ”, “ ” button.
4. Press Start/Pause button.
■ Anti Crease
The Anti Crease option prevents creases
that are formed when the laundry is not
unloaded promptly at the end of the drying
cycle. When Anti Crease is selected, the
dryer repeatedly runs and pauses, giving
you 2 hours to unload the laundry. If the
door is opened during the Anti Crease
option, the option is cancelled.
■ Favorite
Favorite option allows you to store a
customised dry cycle for future use.
1. Turn the dryer on.
2. Select a cycle.
3. Select the option or additional program.
(Anti Crease, Spin Speed etc.)
4. Press and hold the Favorite option button
for 3 seconds.
The Favorite option is now stored for future
use. To reuse the stored cycle, select the
Favorite option and press Start/Pause.
■ Steam
WARNING
Do not open the dryer door during Steam
cycles. Do not touch the steam nozzle in
the drum during or after the steam cycle.
Using the Steam cycle
The Steam Refresh cycle uses the power of
steam to quickly reduce wrinkles in fabrics.
1. Turn the dryer on.
2. Select steam cycle.
3. Press the “ ”, “ ” button.
4. Press the Start/Pause button.
For these settings, the dryer tumbles while
the water in the steam generator is heated.
Steam Hygiene
Steam
cycle
Steam Refresh
Cotton, Easy
Easy Iron /
Care, Mixed
Steam
Static Shield
Fabric
option
cycle
Jeans, Bulky
Static Shield
Item
NOTE
Do not use Steam cycle for delicates
such as wool, silk, and easily
discoloured clothes.
■ Child Lock (
&
)
■ Drum Light
Whilst the dryer is running it is possible to
see inside the drum if you select the Drum
For the safety of children, press Dry Level
Light function.
button for about 3 seconds.
- Light on : Door is opened.
” indication on the LED.
- Light off : Door is closed. Off automatically. You will see “
You can see “
” sign on LED window.
- All controls except Child Lock and Power
■ Spin speed
buttons will be disabled.
This additional programme is able to control - Child Lock continues after the end of cycle.
drying time and you can select high or
NOTE
normal. (Default option is normal)
- High : When washing dehydration
To turn the Child Lock off, press Dry
proceeds from more than 1,200 rpm.
Level button for about 3 seconds.
- Normal : When washing dehydration
proceeds from less than 1,000 rpm.
■ Buzzer
Spin RPM is based on the LG Washing
This is an option to enable you to adjust
Machine.
the volume of beeper sound.
20
Caring for Your Dryer
Caring for your Dryer is very Important
It’s not difficult to care for your dryer but it is
important that you do care for it to get the
best out of it.
Clean Filter
Clean filter after each use and check it
before each use. It should also be cleaned if
the ‘‘Clean Filter’’ light becomes illuminated
and the buzzer sounds whilst the dryer is in
operation.
Cleaning or emptying the filter will reduce
drying times and energy consumption and
lengthen the dryer life.
1. Open the door.
Empty Water Container
Condensed water is collected in the water
container.
Empty the water container after every
use.
Not doing so will affect the drying
performance.
If the water container is full, the “Empty
Water” lamp glows and the buzzer sounds
while the dryer is operating. If this should
occur, the water container needs to be
emptied within the next hour.
1. Pull out the water
container.
2. Pull the filter out.
3. Clean the filter by
using a vacuum
cleaner or rinsing
under the tap.
4. Replace the filter.
- Push the filter all
the way down to
avoid interference
with the door.
5. Close the door.
CAUTION
- After washing the filter, please dry
thoroughly.
- Lint must not be left to accumulate
in the dryer.
NOTE
If the filter is not in your dryer, you
can not operate the dryer.
2. Empty water
container in the
sink.
3. Push it back into
the dryer.
4. Press the
Start/Pause
button.
NOTE
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
consumption.
WARNING
Do not drink the condensed water.
CAUTION
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, LED window may
display “
” (Empty water symbol) and
the dryer may stop because the water
container is full.
If “Clean Filter” symbol is displayed during the operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button.
21
Caring for Your Dryer
Condenser
The condenser is also a very important part for efficient drying performance results so it
needs special care from you. It is recommended that the condenser be cleaned three or
four times a year or when the condenser clean lamp blinks.
1. Push the cap and open the condensing
cover.
4. Clean the condenser thoroughly under a
tap, letting the water flow through
< Front >
Condensing cover
2. Open seal by turning the locking lever
< Side >
Sealing
cover
5. Put everything back together by following
the instructions in reverse order
CAUTION
3. Pull the condenser out by inserting a
finger into the tab at the front of the
condenser. (Don’t force the condenser)
The locking lever must be closed after
cleaning the condenser as below.
Top
Bottom
CAUTION
NOTE
If “Clean Condenser” symbol is
displayed, clean the condenser
promptly.
22
- Operating when the condenser is
clogged with lint can damage the dryer.
This also increases energy
consumption.
- Do not use sharp objects to clean the
heat exchanger. This could cause
damage and leaking.
- Never operate the dryer without the
heat exchanger.
Caring for Your Dryer
■ Ventilation Grill and Cool Air
Inlet Grill
3. Connect
drain hose
to the kit.
Vacuum the front ventilation grill 3-4 times a
year to make sure there is no build up of lint
or dirt that could cause improper air flow.
■ Moisture Sensor
NOTE
- Warm air is exhausted through the
ventilation grill
- Adequate ventilation has to be
provided to avoid the back flow of
gases into the room from appliances
burning other fuels, including open
fires.
The device senses the moisture level of the
laundry during operation, which means it
must be cleaned regularly to remove any
build up of lime scale on the surface of the
sensor. Wipe the sensors inside drum (as
illustrated)
■ Condensed Water Drain-out
Normally, condensed water is pumped up to
the water container where water is collected
until manually emptied.
Water can also be drained out directly to a
mains drain, especially when the dryer is
stacked on top of a washing machine. With
a connecting kit for a mains drain hose,
simply change the water path and reroute to
the drainage facility as below:
1. Take
connecting
kit out.
2. Separate
water
container
hose from
the kit.
23
Caring for Your Dryer
Before cleaning the dryer's interior, unplug the power cord to avoid electric shock hazards.
• Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain (gully) in the immediate vicinity.
The water inlet filter
•"
" icon will be displayed on the control panel when water does not enter the dryer.
• If water is very hard or contains traces of lime deposit, the water inlet filter may become
clogged. It is therefore a good idea to clean it from time to time.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Carefully remove the filter from inlet valve
and clean the filter using a bristle brush.
4. Replace the filter and tighten up the inlet
hose.
24
Additional Tips for Smart Use
■ Drying Guide
Capacity of
dryer
CYCLE
Cotton
Mixed
Fabric
Easy Care
Display Drying Time
(Including Cooling Time)
Normal
High
Extra
8 kg
125 min
115 min
Very
8 kg
120 min
110 min
Cupboard
Light
8 kg
8 kg
115 min
103 min
105 min
93 min
Iron
8 kg
97 min
87 min
Very
4 kg
53 min
43 min
Cupboard
4 kg
48 min
38 min
Iron
4 kg
41 min
31 min
Cupboard
4 kg
58 min
38 min
Iron
4 kg
51 min
31 min
Bulky Item
2 kg
60 min
-
Jeans
3 kg
36 min
-
Steam Hygiene
3 kg
56 min
-
Steam Refresh
Dress Shirts
Max.5EA
25 min
-
Sports Wear
2 kg
24 min
-
Quick Dry
3 kg
50 min
-
Delicate
1.5 kg
45 min
-
Wool
1 kg
21 min
-
25
Additional Tips for Smart Use
Woollens
Dry woollens on “wool’’ cycle. Be sure to
follow fabric care label symbols first. Wool
may not be completely dried from the cycle,
so don't repeat drying. Pull woollens to their
original shape and dry them flat.
Below are fabric care label Symbols.
Symbols
Instructions
Dry
Tumble dry
Woven and Loopknit Materials
Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press /
Crease resistant
Permanent Press and Synthetics
Do not overload your dryer. Take out
permanent press items as soon as the dryer
stops to reduce creases.
Do not tumble dry
Baby Clothes and Night Gowns
Always check the manufacturer’s
instructions.
Medium heating
Rubber and Plastics
Do not dry any items made from or
containing rubber or plastics such as:
No heat / air
a) Aprons, Bibs and Chair Covers
b) Curtains and Table Clothes
c) Bathmats
Fibreglass
Do not dry fibreglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
Fabric Care Labels
Clothes have their own wash care labels, so
drying according to the wash care label is
recommended.
Not only that, the laundry must be sorted
according to size and type of fabric.
For the best drying performance and most
efficient energy usage, do not overload the
dryer.
26
Gentle / Delicate
Do not dry
High heating
Low heating
Line Dry / hang to dry
Drip dry
Dry flat
In the shade
Additional Tips for Smart Use
■ Spare Parts
■ Accessory Parts
Spare parts that are required under the
terms of warranty are provided free of
charge. If the warranty has expired then
spare parts must be purchased from the
service centre.
• Accessories available for this product
( depending on the model )
1. Condensing Drain Hose and Hose
Holder (Purchased Separately)
■ Disposal of the Dryer
It is requested that you dispose of your
dryer safely to protect your children and
others from possible injury.
The door, lid and other protruding parts
must be removed and the power cord
should be cut off before safe disposal.
2. Dryer Rack (Purchased Separately)
■ Service Contact
If there is a problem with your dryer, first
consult the Trouble Shooting Guide. If you
cannot find the error and you are unable to
resolve the problem, please contact the
Service centre.
3. Y connector and hose (Purchased Separately)
A Customer Service representative will ask
you the following questions:
1. Name, address and postcode
2. Phone number
3. Description of problem
4. Model number and serial number of your
dryer
5. Date of Purchase
4. Stacking Kit ( Purchased Separately )
Holder : 2EA, Screw : 4EA
• The stacking kit can be used for washer
top plate size 550mm and 600mm for
both.
If stacking is needed, you must stack
the dryer upon an LG washing
machine.
A stacking kit is sold separately.
27
Troubleshooting Guide
■ Troubleshooting Tips
To save you time and money, the following page will help answer your questions before
service call.
Issue
What to do
Dryer won’t run
1. Check dryer is plugged in.
2. Check "Start" button is pressed.
3. Check door is properly closed.
4. Check Room temperature is not below 5°C.
5. Check a fuse is not blown or the circuit breaker is
tripped and replace them.
(Caution : electric dryers generally use two fuses or
breakers) After emptying the water container and
Cleaning filter during operation, you must press the
Start button, then the dryer operates again.
It takes a long time
to dry
1. The filter should be cleaned after each load.
2. Check water container is emptied.
3. Check cleanness of condenser.
4. Select correct programme setting for fabric type
5. Check air ventilation grill or rear vents of dryer are not
obstructed
6. Check clothes are not excessively wet
7. Check the dryer is not overloaded
1. Check filter is clean
2. Check condenser unit is not clogged
Clothes are covered in
Fluff
1. Check lint filter is empty.
2. Check all the items in the dryer are clean
3. Check all the laundry has been correctly sorted by
fabric type
4. Check dryer is not overloaded
5. Check if there is any paper, tissues or other
degradable items amongst the laundry and remove.
The drying time is
not consistent
The drying time for a load will vary depending on the
heat setting, the size of the load, the type of fabrics, the
wetness of the clothes and the condition of the lint filter.
Water is leaking
Check if the door or seal cover is dirty or damaged.
The clothes are
creased
Check the laundry is not overloaded. Try a shorter drying
time and remove items whilst they still retain a slight
amount of moisture. Use the anti-crease function.
The garments have shrunk
To avoid shrinkage, please follow the care and use
instructions for your garment, as some fabrics shrink
naturally when washed and other fabrics should not be
placed in a dryer.
28
Troubleshooting Guide
■ Error Mode
•
: The door must be closed and Start/Pause button must be pressed for
re-operation. If error message continues to occur, unplug the power cord
and call the service centre for advice.
•
,
,
: If error message continues to occur, unplug the power cord and call the service
centre for advice.
■ Drum light does not work
• Contact the customer service centre.
29
Troubleshooting Guide
NOTE
SmartDiagnosis™ function is
available only for the products with a
SmartDiagnosis™ mark.
In case of a mobile phone with static
option, the smart diagnosis function
might not operate.
■ Using SmartDiagnosis™
• Only use this feature when instructed to do
so by the call centre. The transmission
sounds similar to a fax machine, and so
has no meaning except to the call centre.
• SmartDiagnosis™ cannot be activated if
the dryer does not power up. If this
happens, then troubleshooting must be
done without SmartDiagnosis™. If you
experience problems with your dryer, call
the Customer information centre.
Follow the call centre agent's instructions,
and do the following steps when requested:
1. Press the Power button to turn on the
dryer. Do not press any other buttons or
turn the cycle selector knob.
Max. 10 mm
3. Press and hold the “More Time” button
for three seconds, while holding the
phone mouthpiece to the icon or Power
button.
4. Keep the phone in place until the tone
transmission has finished.
The display will count down the time.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get
an accurate recording of the data, you
may be asked to try again.
5. Once the countdown is over and the
tones have stopped, resume your
conversation with the call centre agent,
who will then be able to assist you using
the information transmitted for analysis
during your call to the Customer
information centre.
NOTE
2. When instructed to do so by the call
centre, place the mouthpiece of your
phone very close to the Power button.
30
“Smart Diagnosis is a troubleshooting
feature designed to assist, not
replace, the traditional method of
troubleshooting through service calls.
The effectiveness of this feature
depends upon various factors,
including, but not limited to, the
reception of the cellular phone being
used for transmission, any external
noise that may be present during the
transmission, and the acoustics of the
room where the machine is located.
Accordingly, LG does not guarantee
that Smart Diagnosis would accurately
troubleshoot any given issue.”
Technical Data
3”
(8cm)
850 mm
60 in.2
(387 cm2)
60 in.2
(387 cm2)
24”
640 mm 1”
1”
(61.0 cm)
(2.5 cm)
(2.5 cm)
600 mm
3”
(8cm)
Closet Door Vent
Requirements
Weight : 46.8kg, Black Door
46.5kg, Glass(Cr) Door
■ Electrical Requirements
Volts
Hertz
Watts
230 V
50 Hz
2450
Ensure you connect the dryer to the correct
electricity voltage. The ratings plate on your
dryer shows you what the voltage should
be.
■ Ventilation Requirement
Alcove or
undercounter
Ensure air flow
of 112 cu.ft./min
through dryer
Closet
Closet door must have
2(louvered) openings,
each having a
minimum area of 60
sq. inches (387 sq.cm),
located 3 inches (8 cm)
from bottom and top of
door.
31
Warranty
Disposal of your old appliance
1. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
2. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.
3. For more detailed information about disposal of your old
appliance, please contact your local council, waste disposal
service or the shop where you purchased the product.
NOTE
• When disposing of the appliance, cut off the mains cable, destroy the plug and
disassemble the door to prevent anything from being trapped inside.
■ What is not covered.
Service trips to your home to instruct you on the product.
If the product is connected to any voltage other than that shown on the rating plate.
Faults caused by accidental damage, neglect, misuse or Acts of God.
If the fault is caused by reasons other than normal domestic use or use in accordance
with the owner's manual.
Faults caused by vermin, for example rats, mice etc.
Noise or vibration that is considered normal, for example, water drain sound, spin
sound or warning beeps.
Correcting the installation for example, leveling the product, adjustment of drain.
Normal maintenance recommended by the owner's manual.
Removal of foreign objects/substances from the machine including the pump and inlet
hose filter, for example, grit, nails, bra wires and buttons etc.
Replacing fuses, correcting wiring or correcting plumbing.
Correction of unauthorised repairs.
Incidental or consequential damage to personal property caused by possible defects
with this appliance.
If this product is used for commercial purposes its warranty is invalidated.
(Example: Public places such as public bathroom, lodging house, training centre,
dormitory)
If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the products, or the replacement of a defective part, shall be
borne by the owner.
32
Warranty conditions for dryer
1. The warranty period begins on the
purchase date and is valid for 24
months. Begin of warranty period is
proven if, the buyer submits purchase
receipt together with the warranty card,
filled in and signed by the seller. The
serial number of the product must agree
with the number entered onto the
warranty card.
2. During the warranty period, we will
correct any defects at no cost to you, if it
can be proven that these are attributed
to manufacturing or material defeats.
4. We decide whether to make repairs,
exchange or replace parts. Exchanged
or replaced parts are our property. The
original warranty period is not prolonged
if a refrigerator is repaired or certain
parts are replaced.
5. The warranty is nullified if any person
intervenes in the apparatus that are not
authorised by LG Electronics, if the
apparatus is used for commercial purposes.
6. Always keep the original packaging,
so that if the apparatus requires
servicing, it can be transported without
3. Damages due to incorrect handling, nondamaging it.
compliance with instructions for use and
7. If a repair is covered by this warranty,
normal wear are not covered by this
always contact your dealer or an
warranty. Also, the warranty does not
authorised service centre.
cover wear parts or easily broken parts
(for example, viewing glass, light bulbs).
8. Further claims are excluded. If parts of
The buyer is responsible for any
these provisions are invalid, they apply
damages during transport as well
in the sense of the wording. The validity
shipping and packaging costs.
of the other provisions is not effected.
Warranty Certificate
For offer a 24-month warranty for this apparatus
During the 24-mouth warranty period, we will repair your apparatus at no cost to you or
make available spare parts to your dealer free, if this apparatus fails due to
manufacturing or material defects. Further claims are excluded.
Your warranty conditions on the rear also apply!
Type of apparatus:
Serial number:
Name of buyer:
Purchase date:
Dealer’s stamp and signature
33
Memo
34
Download PDF