LG | WD-12215RD | LG WD-12215RD Owner’s Manual

P/ No.: 3828ER3021R
Owner's Manual
Washing
Machine
WD-12210RD
WD-12215RD
Please read this manual
instructions
on
safe
carefully. It provides
installation, use, and maintenance.
Retain it for future reference.
Record the model and serial numbers of your machine
and report this information to your dealer if your machine
requires
service.
PRODUCT FEATURES
Direct Drive
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
Door
Opening
pulley.
Tilted Drum and Extra
Large
Tilted drum and extra
and unload
large opening
clothing more easily.
make it
possible
to load
Water Circulation
Spray detergent
Clothes
are
solution and water onto the load
soaked
more
quickly
The
and
over
and
thoroughly during
more easily by the
detergent suds can be removed
during rinse cycle. The water circulation system
detergent more efficiently.
uses
over.
wash
cycle.
water shower
both water and
RollerJets
Washing ball enhances the wash performance and reduces damage
to the clothing. The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
Built-in Heater
Internal heater
selected
automatically
cycles.
heats the water to the best temperature
on
Child Lock
The Child lock prevents children from pressing any button to change the
settings during operation. The Power button will remain operative when the
Child Lock is activated
during
a
cycle.
CONTENTS
Important Safety
Information ...........................................................................................................................................3
Specifications...................................................................................................................................................................4
Installation Instructions ....................................................................................................................................................5
Preparation
Using
the
Cycles
Before
Washing..........................................................................................................................................10
Dispenser
......................................................................................................................................................11
...........................................................................................................................................................................13
How to Use the Washer .................................................................................................................................................14
Maintenance ..................................................................................................................................................................21
Troubleshooting Guide
Terms of
2
..........................................................................................................
........................................26
Warranty .........................................................................................................................................................27
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
?
?
To reduce the risk of fire, electric shock,
precautions, including the following:
Read all instructions before
using
the washer.
Do not wash articles that have been
cleaned in, washed in, soaked in,
or
?
injury
?
Do not add gasoline,
dry cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
?
or more.
HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine,
?
Close
play on
or
or
store the washer where it will be
the weather.
Do not tamper with controls.
Do not
repair or replace any part of the washer or
attempt any servicing unless specifically
or
published user-repair instructions
out.
?
See Installation Instructions for grounding
requirements.
?
ALWAYS follow the fabric
care
instructions
supplied by the garment manufacturer.
?
Do not
place
items
exposed
to
cooking oil in your
cooking oils may
washer. Items contaminated with
contribute to
a
in the washer.
of children is necessary when
the washer is used near children.
supervision
Do not install
that you understand and have the skills to carry
this time.
Do not allow children to
or
the door to prevent children
inside.
instructions
water flow from each for several minutes. This will
during
the washer, follow basic
recommended in the user-maintenance
turn on all hot water faucets and let the
release any accumulated hydrogen gas. As the gas
is flammable, do not smoke or use an open flame
remove
hiding
exposed to
?
using
Before the washer is removed from service
from
?
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks
to persons when
discarded,
previously
spotted with
gasoline, dry cleaning solvents, or other
flammable or explosive substances, as they give
off vapors that could ignite or explode.
?
or
?
a
chemical reaction that could
cause
load to catch fire.
Do not
use
fabric softeners
or
products
to
eliminate static unless recommended by the
manufacturer of the fabric softener
or
product.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
This
of electric shock
?
Do not
use an
?
Do not
remove
?
adapter or extension
ground prong.
If you don't have the proper
cord.
outlet, consult an electrician.
WARNING: Improper connection of the equipment-grounding conductor can result in risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet,
have a proper outlet installed by a qualified electrician.
-
3
SPECIFICATIONS
Name
Power
su
supply
Size
Weight
Wash capacity
Dry capacity
Spin speed
Permissible water
Front-loading Washing
:
220-240V~,50Hz
Machine
68.6cm(W) X 75.0cm(D) X 108.6cm(H), 126.5cm(D,
:90kg
:10kg(2200W)
:6kg(2150W)
: No Spin/400/600/800/1000/1200 rpm
145 PSI (30
1000 kPa)
pressure : 4.5
The appearance and
:
~
specifications
Specifications subject
Accessories
4
:
to
door
open)
~
may be varied without notice to raise the units
change by manufacturer.
quality.
INSTALLATION INSTRUCTIONS
Install
store unit where it will not be
or
exposed
to
temperatures below freezing
or
to outside weather conditions.
exposed
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed
on a
carpeted floor.
In countries where there
are areas which may be subject to infestation by cockroaches or other vermin, pay
particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.
Shipping
The
bolts
appliance
is fitted with
Removing shipping
1. To
the
If
bolts to prevent internal
special
4 bolts
are
remove
locked. Before
are
3. Take out the 4 bolts and braces
the braces
operating
not
slightly. Keep
?
Whenever the
shipping
appliance
by twisting
the 4 bolts, braces
and the wrench for future
the bolts and braces.
removed, it may cause heavy
vibration, noise, and malfunction.
they
damage during transport.
bolts
prevent internal damage during transport,
the washer,
?
shipping
is
use.
transported, the
replaced.
bolts and braces must be
cap
2. Unscrew the 4 bolts with the wrench
supplied.
4. Close the holes with the caps
supplied.
5
INSTALLATION INSTRUCTIONS
Installation clearances
The location must be
large enough
to
fully open
the washer door.
Washer dimensions
[Side view]
?
Most installations
(10 cm)
require
a
minimum 4 in.
clearance behind the washer.
Minimum installation
recessed
area
spacing
for
installation
The
following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
?
Additional clearances
door and floor
?
Additional
might
moldings.
spacing
of 1 in.
be
required
[Front view]
for wall,
Level floor
(2.5 cm)
on
all sides of
the washer is recommended to reduce noise
transfer.
Allowable
slope
under entire washer is 1°.
Power outlet
Must be within 60
Companion appliance spacing
considered.
6
should also be
in.(1.5m)
of either side of the
washer. Do not overload the outlet with
than
one
appliance.
more
INSTALLATION INSTRUCTIONS
Electrical connection
?
Do not
?
If the
extension cord
use an
supply
cord is
damaged,
technician in order to avoid
?
Always unplug
Connect the machine to
?
The
Connecting
a
double
adapter.
it must be
replaced by
must be
water
a
the manufacturer
or
its authorized service
hazard.
the machine and turn off the water
?
appliance
or
grounded
positioned
supply
supply
after
use.
socket in accordance with current
so
that the
plug
is
easily
wiring regulations.
accessible.
hose
?
Water
4.5
?
~
Don't
supply pressure must be
(30~1000kPa)
between
145 PSI
strip
or
crossthread when
connecting
Inlet
hose to the valve.
?
If the water
a
?
supply pressure is more than 1000 kPa,
pressure reducer device should be installed.
Two
Sealing
washers
supplied
are
with the water
inlet hoses to prevent water leaks.
?
Check water
connections
tightness of washing machine
by turning the tap completely on.
?
Periodically check the condition
replace the hose if necessary.
?
Make
sure
that there is
no
of the hose and
bent in the hose and that
it is not crushed.
?
The Inlet hose which has red connector is for
the hot water tap.
?
Hot and cold water faucets MUST be installed
properly
NOTE
:
Washing Machine is
to be connected to the water mains
using
to your washer's water inlet.
new
hoses.
Old hoses should not be used.
Repairs
to the
persons may
washing machine must only be carried out qualified personnel. Repairs carried
injury or serious malfunctioning. Contact your local service center.
out
by inexperienced
cause
Do not install your washing machine in rooms where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired
at
temperatures below the freezing point.
If the
appliance is delivered in the winter months and temperatures are below freezing.
washing machine at room temperature for a few hours before putting it into operation.
Store the
7
INSTALLATION INSTRUCTIONS
Installation of drain hose
about 100
about 145
about 105
cm
cm
cm
?
?
about 100
cm
The drain hose should not be
?
cm.
siphon
break.
Place the end of the drain hose in the hole of the
cm
about 105
100
a
floor drain system.
about 145
?
This washer has
cm
min.60cm max.10cm
placed higher
than
?
from the bottom of the washer.
When
so
Properly securing the drain hose will protect
floor from damage due to water leakage.
installing
the drain hose at
it cannot break away and
a
cause
sink,
secure
flooding
it
and
damage.
the
?
Properly securing the drain hose will protect
damage due to water leakage.
the
floor from
This
equipment is
not
designed
for maritime
use or
When
disposing
of the
appliance,
cut off the power
as in RV's, aircraft, etc.
length of time (e.g. holiday), especially if there is no floor drain
for mobile installations such
Turn off the valve if the machine is to be left for any
(gully) in the immediate vicinity.
cable, and destroy the plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
packaging
8
from children.
a
risk of suffocation!
Keep
all
INSTALLATION INSTRUCTIONS
Level
adjustment
?
Leveling
the
washing
machine
properly prevents
excessive noise and vibration.
Install the
appliance
on a
surface, preferably in
NOTE
:
errors.
If the floor is uneven, adjust the adjustable feet
as required. (Do not insert pieces of wood, etc.
Make
on
Lock nut
room.
or suspended type flooring may
contribute to excessive vibration and
under the
?
of the
Timber
unbalance
?
solid and level floor
a corner
feet.)
sure
that all four feet
are
stable and
the floor and then check that the
resting
appliance is
perfectly level.
(Use a leveling tool.)
?
Adjustable
feet
After the washer is level, tighten the lock nuts
up towards of the base of the washer.
All lock nuts must be
Adjustable
feet
Adjustable
tightened.
feet
Diagonal Check
When pushing down the
machine top plate
edges of the washing
diagonally,
not move up and down at all.
the machine should
(Please, check both
directions.)
If machine rocks when pushing the machine top
plate diagonally, adjust the feet again.
9
PREPARATION BEFORE WASHING
Do not
use
stain removal sprays
from the front
printing
near
the machine
as
the overspray may fade
or remove
the
panel.
WARNING
To reduce the risk of
fire, electric shock,
or
injury to persons, read the IMPORTANT SAFETY
operating this appliance.
INSTRUCTIONS before
1. Fabric Care Labels
Look for
a care
label
on
your clothes. This will tell you about the fabric content of your garment and how it should
be washed.
2.
Sorting
To get the best results, sort clothes into loads that can be washed with the
Different fabrics need to be washed in different ways.
Always
wash
cycle.
sort dark colors from
discoloration of white
Soil
same
pale colors and whites. Wash separately as dye and lint transfer can occur causing
clothing. If possible, do not wash heavily soiled items with lightly soiled ones.
(Heavy, Normal, Light)
Separate
Separate
Color (White, Lights, Darks)
Lint (Lint Producers, Collectors)
3. Check before
Combine
Large
large
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
producers
and lint collectors
separately.
loading
and small items in
items should not be
Do not wash
clothes
single
more
a
load. Load
large
items first.
than half the total wash load.
items. This may
cause an
out-of-balance load. Add
?
one or
Check all the
two similar items.
pockets
to make sure that
they
are
empty. Things such as clip, matches, pens,
coins, and keys can damage both your washer
and your clothes.
?
Close
zippers, hooks,
and
strings
that these items do not snag
?
Pretreat dirt and stains
detergent
to make sure
other clothes.
by brushing
a
little
dissolved in water onto stains like
collars and cuffs to
10
on
help
lift dirt.
USING THE DISPENSER
The automatic
detergent
for
dispenser consists of three compartments which
prewash and 3) liquid or powdered detergent
hold
1) liquid fabric softener, 2) liquid
or
powdered
and color safe bleach for main wash.
All
laundry products can be added at once in their respective dispenser compartments.
They will be dispensed at the appropriate time for most effective cleaning. After loading
additives into the dispenser, close the dispenser lid.
the
Add
these steps:
1.
detergent,
Open
the
2. Load the
3. Close the
About
bleach and fabric softener to the automatic
dispenser
lid.
laundry products
dispenser
dispenser following
laundry
into the
appropriate compartments.
lid.
detergent
Low
lathering detergent is recommended for this washer. Use the manufacturer's recommended amount.
If low lathering detergent is not available, a reduced amount of regular detergent may be used.
Because reducing the amount of detergent may reduce cleaning, it is important to pretreat stains,
sort carefully by color and soil level, and avoid overloading.
Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the
For best results, avoid using too much detergent.
NOTE
:
Liquid detergent
will drain into the washer drum
as
it is added.
1. Fabric Softener
Liquid
Fabric
?
Softener
?
Pre Wash
Add recommended amount of fabric softener to
Dilute concentrated softeners with
warm
water to
the fill line.
?
Do not exceed the maximum fill line.
cause
Main Wash
Compartment
Compartment
this compartment.
Compartment
Compartment
load.
early dispensing
Overfilling
can
of the fabric softener which
could result in stained clothes.
?
Do not pour fabric softener
directly
on
the wash
load.
?
The fabric softener will be
during
the last rinse
automatically dispensed
cycle.
11
USING THE DISPENSER
2. Prewash
?
?
Detergent Compartment
Add
detergent to this compartment when using
the Prewash option. Liquid or powdered
detergent may be used in this compartment. The
detergent will automatically be dispensed during
Prewash if the Prewash option is selected.
Add 1/2 the recommended amount of
to the Prewash
detergent
compartment and the
recommended amount of
detergent
:
If
cause
finish.
12
damage
Add measured
detergent to this compartment for
Detergent is flushed from the
dispenser at the beginning of the cycle. Either
powdered or liquid detergent can be used.
Main wash.
?
Liquid or powdered color-safe bleach may be
added to the main wash compartment along with
the same type of detergent, liquid or powdered.
NOTE
using pre-wash
use on or near
?
stain
removers
the Washer
do not
they may
panel's
as
to the control
Detergent Compartment
to the main
wash compartment.
NOTE
3. Main Wash
:
If you are using the Prewash option with
Main wash, powdered detergent must be
used in the main wash
liquid detergent
drum
as
compartment since
will drain into the washer
it is added.
CYCLES
Select
cycles designed
Fabric
Program
First check if
for different
Type
laundry
types of fabric and soil levels.
Proper
Temp.
Option
95˚C
Pre Wash
Maximum
Load
Dry
(option)
Time in
Minutes
is
machine washable.
(white cotton, linen
towel and sheets...)
Cotton
Color fast garments
(shirts, night dresses,
pajamas...)and lightly
soiled white
Time
172
Delay
Eco
Rating
Bio
60˚C
Time Save
(50˚C, Cold,
40˚C, 30˚C)
Crease Care
Normal
151
cotton(underwear...)
Polyamide, Acryic,
Polyester
Synthetic
Pre Wash
Time
40˚C
Delay
Less than
Eco
(60˚C, Cold,
50˚C, 30˚C)
5.0
Bio
kg
Low
82
Temp.
Time Save
Crease Care
Delicate
Delicate
laundry easily
damaged
Machine washable
Wool/Silk
woolens with pure
wool only
Time
30˚C
(40˚C, Cold)
Time
(40˚C, Cold)
delicate and wool
Wash
laundry
Quick
Colored
Laundry
is
soiled fast
30
Pre Wash
Eco
Bio
:
:
:
lightly
Delay
Delay
Crease Care
30˚C(40˚C,
Cold)
Crease Care
Time Save
Time
If the laundry is heavily soiled, "Pre Wash"
Cotton and Synthetic Program.
course
kg
3.0
Delay
3.0
52
-
kg
Less than
5.0
61
-
kg
Less than
Cold(30˚C,
40˚C)
which
4.0
Less than
Crease Care
Time
64
-
Time Save
"Hand Wash" marked
Hand
Less than
Crease Care
30˚C
new
Delay
Time Save
kg
Less
30
is recommended. Pre Wash is available in
By selecting Eco function, the water temperature is reduced and washing time is lengthened. So you can
economize in your consumption of heating energy.
If you want to elimenate protein stains (milk, blood, chocolate...), you may select Bio function by pressing
the option button.
Quick 30
:
By selecting
this function, you may wash
a
small
quantity
of colored
laundry
which is
lightly
soiled
fast.
can only select Bio function and Eco function when temperature is higher than 60˚C in
Synthetic. If the function is selected, the beginning water temperature can not be changed.
NB. You
Cotton and
13
HOW TO USE THE WASHER
CYCLES
?
Rotate the
designed
Cycle
selector knob to select
FAVORITE
cycle
for different types of fabric and soil
levels.
?
Each
cycle
wash
has
a
preset Water
Temperature, Spin,
1. Select
a
Favorite Program:
a
cycle.
to store a customized
2. Select the other desired
See the page 13.
The preset settings
before Start.
Program allows you
cycle for future use.
To make
?
Rinse, Option.
?
Favorite
?
Water
can
be
changed anytime
Temp., Rinse, Spin.
3. Select the desired
Options.
4. Press and hold Favorite
seconds
Program
(2 beep sounds).
button 3
5. Press Start/Pause.
The Favorite program is now stored for future
use. To reuse the program, select Favorite
Program
14
and press Start/Pause.
HOW TO USE THE WASHER
?
?
washer-dryer's automatical process from
washing to drying can be selected easily.
For most even drying make sure all articles in
,
?
are
Do not overload
?
Drying course can last up to 120min. When
selecting drying only, drying course will start after
spining.
These drying times are given as a guide to help
you set your dryer for manual drying. Drying times
can vary greatly depending on dampness, room
the
too many articles
into drum. Items must be able to tumble
?
By press the
selected.
similar in material and thickness.
dryer by stuffing
freely
dryer
If you open door and remove load before
finished its cycle, remember to press the
?
has
By pressing
the DRY button, you
Normal
can
More
Low
?
After the end of
dry,
experience
"
Less
displayed.
the "Start/Pause" button the program
be ended. If you not press the "Start/Pause"
button, the program is ended after about 4 hours.
By pressing
"
dry woolen articles. Pull
original shape and dry them flat.
Woven and
is
-
-
Cooling Cycle.
-
Automatic
?
guide
or
Recommand Automatic
drying
drying
time and tighter
course as a
-
woven and loopknit materials may shrinks,
by varying amounts, depending on their quality.
stretch them out
Always
Do not overload your
immediately
or
after
drying.
Synthetics
dryer
Take out permanent press articles
dryer stops to reduce wrinkles.
as soon as
the
Leather Materials
check the manufacture's instructions.
Always
Baby
kind of
them to
Some
Fiber
decrease
temperatures for faster reaction
temperature control.
?
-
Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature of
the exhaust to increase
own
Materials
Loopknit
Permanent Press and
1.Drying
be
guide.
Do not tumble
their
can
"
will be your best
can
Woolen Articles
20/40/60
Temp.
"
time
drying
select
-
80/100/120
the
Dry button,
temperature and type of fabric and your
START/PAUSE button.
?
guide
?
This
clothes load
time
2.Drying
DRY
clothes and
Night Gowns
clothes.
-
a) Synthetic Low Temp.
b) If you want to iron clothes-Less
c) Cotton Normal
d) Diaper More
-
check the manufacture's instructions.
Always
Rubber and Plastics
-
-
-
NOTE
:
The estimated
actual
The
drying
drying
time varies from the
time with
an
Automatic.
selected affect
drying
dry any items mode
plastics, such as:
from
or
containing
or
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
type of fabric, size of the load, and the
dryness
Do not
rubber
time.
Fiber
-
glass
dry fiberglass articles in your dryer. Glass
particles left in the dryer could be picked up by
your clothes the next time you use the dryer and irri
Do not
tate your skin.
15
HOW TO USE THE WASHER
3.Completion
?
?
?
?
of
Drying
"
When
2. No
"
drying cycle is completed,
[Cool
Down] is displayed on the Multi display.
The Cool Down is setting automatically when a
drying cycle is complete.
When you are not remove a loaf of clothes from
the dryer as soon as it stops, wrinkles can form.
The Cool Down
spin
?
If
spin is selected,
draining water.
no
The
required lamp will light up for identification.
operating periodically tumbles,
rearranges and fluffs the load to avoid wrinkles
without heat for up to 4 hours.
?
The
the clothes
is
the washer stops after
WATER TEMP.
message will continue to display until
are removed or the Start/Pause button
pressed.
SPIN
?
By pressing
the Water
temperature
-
can
Temp. button,
the water
be selected.
Cold
-30˚C/40˚C/50˚C/60˚C/95˚C
1. Water
?
?
By pressing
can
the
Spin button,
the
spin speed
-
be chosen.
Temperature
Water temperature can be selected
according to the program.
as
below
Cotton
Cold-30˚C-40˚C-50˚C-60˚C-95˚C
-
1.
Spin
selection
Cold-30˚C-40˚C-50˚C-60˚C
-
Spin speed
?
as
-
-
-
is available
according
to the program
Delicate & Wool / Silk & Quick 30 & Hand Wash
Cold
-
30˚C
-
40˚C
follows.
Cotton & Quick 30
NoSpin-400-600-800-1000-1200
Synthetic & Wool/Silk & Hand Wash
NoSpin-400-600-00-1000
Delicate
NoSpin-400-600-800
16
Synthetic
The required temperature lamp will light up for
identification.
For the
page13.
more
detailed
information, please refer to the
HOW TO USE THE WASHER
CHILD LOCK
PROGRAM
1. Child Lock
Child Lock
?
Spin
can
be set
button and
by pressing and holding
Dry
simultaneously.
the
button
?
?
9 programs
Lamp
1.
?
When child lock is set, all buttons
?
are
inoperable.
To deactivate Child Lock system, press and hold
Spin and Dry button simultaneously again.
?
will
are
-
according
to the
laundry type.
up to indicate selected program.
light
Program
When Start/Pause button is
program is
the
available
By turning
automatically
the
Program dial,
selected in order of "Cotton
Delicate
-
Wool/Silk
Rinse+Spin
-
Spin
-
-
pressed,
the Cotton
selected.
the program is
-
Synthetic
Hand Wash
-
-
Quick 30
-
Drain".
Regarding to the laundry type for each program Please
refer to the page13.
2. Course
To
?
change
to the desired program, whilst in child
lock mode.
-
1. Press and hold both
Spin
and
Dry together
-
-
once
again.
-
2. Press the Start/Pause button.
Cotton
Synthetic
Delicate
Wool / Silk
-
-
-
-
Hand Wash
Quick
-
Drain
30
Rinse+Spin
Spin
3. Select the desired program and press the
Start/Pause button again.
?
The child lock
automatically
occur.
can be set at any time and it is
canceled when operational errors
Also Child Lock works when power is off.
17
HOW TO USE THE WASHER
START/PAUSE
DISPLAY
1.
1. Start
?
This Start/Pause button is used to start wash
cycle
or
pause the wash
?
display
"
"
?Aftertheendofdry"
?
If
function
When child lock is selected, the
is displayed.
"
cycle.
2. Pause
?
Special
When time
displayed.
is selected, it shows the
times to finish the selected program.
remaining
temporary stop of wash cycle is needed, press
delay
is
the Start/Pause button.
2. Self
?
When in Pause, the power is turned off
automatically after 4 minutes.
?
NB. The door will not open before 1 to 2 minutes
when Pause is selected,
or
at the end of the wash
?
If the washer encounters
cycle.
"
"
"
"
"
"
"
"
"
"
"
"
"
?
To cancel the Time
button should be
2. Initial
?
When the
washer is
) button
Power(
Delay function,
pressed.
So, if you
without
the
Power(
follows.
want to advance into the
18
Problem of
:
Door is not closed
:
Over load in moter.
:
Over load in moter.
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
:
Power failure
"
"
"
"
)
"
Dry
sensing
overfilling
error
water
trouble
heater trouble
If these error letters are displayed, please refer to the
troubleshooting page 26 and follow the guide.
3.
Completion
of
washing
washing cycle
changing the program, just press the
Start/Pause button and then the washer will
proceed.
:
:
Power(
) button is pressed, the
for
Coloureds
ready
program. And the
as
"
Water pressure
"
"
Program
other initial conditions
?
to turn power on and off
fault during operation,
displayed.
:
"
1. Power
Press the
a
the associated fault will be
POWER
?
diagnose display
?
When
"
washing cycle is completed,
is displayed on the "Multi display".
"
HOW TO USE THE WASHER
4. Time left
?
OPTION
During washing cycle,
displayed.
the
remaining washing
time
is
?
Recommended program
by
1. Prewash
manufacturer.
?
-
-
Cotton 95°C
:
around 2 hours and 52 minutes
Cotton 60°C
:
around 2 hours and 31 minutes
-
-
-
-
-
-
-
-
-
Synthetic
:
around 1 hour and 22 minutes
Delicate
:
around 1 hour and 4 minutes
Wool / Silk
:
around 1 hour and 1 minute
Hand Wash
:
around 52 minutes
Quick 30
Rinse+
Spin
Spin
:
:
option
for loads that need pretreatment.
prewash and drain.
When
using Prewash option, do not use liquid
detergent in the Main Wash Compartment.
Use powdered for the main wash.
2. Eco
around 30 minutes
around 17 minutes
?
around 11 minutes
:
Drain
:
Use this
Adds 16 minutes
By selecting
reduced and
around 1 minute
Eco function, the water temperature is
washing time is lengthened. So you
economize in your
can
consumption
of
heating
energy.
?
?
The
washing time may vary by the amount
laundry, water pressure, water temperature
other washing conditions.
If
an
unbalanced load is detected
removing
or
of
NB. You
and
if the suds
is
select Eco function when temperature
higher than 60°C in Cotton and Synthetic.
can
3. Time Save
program operates, the wash time may be
extended.
(Max. increasing
?
time is
45minutes.)
This
option
can
be used to reduce the time of
a
wash program.
?
To
?
this option press the Time Save button
before the wash program is started.
use
once
This
option
is not available with Quick 30 program.
19
HOW TO USE THE WASHER
4. Time
Delay
DOOR LOCKED
before
Preparing washing
-
-
-
?
-
-
Turn
Load
"Time
Delay"
the water tap.
on
laundry
Place the
How to set "Time
Press the
Program
Press Time
?
button and set the
The door
can
If Time
Delay
button is
delayed
pressed,
Each
pressing
one
"3:00" is
displayed.
time is 19:00 hours and the
of the button advances
on
time
delay
hour.
?
To cancel the time
?
Time
?
According
delay, press
the Power button.
Delay is 'estimated time' from the present to
completion of washing cycle or selected process.
to the condition of water
supply
and
temperature, the delayed time and the actual
washing time may vary.
5. Bio
If you want to eliminate protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing
NB. You
is
the
can
higher
option
button.
select Bio function when temperature
than 60 C in Cotton and Synthetic.
6. Crease Care
If you want to prevent crease, select this button
with spin.
20
These
be unlocked
be
opened
the
by pressing
after
lights show elapsed
operating.
washer is
Press the Start/Pause button.
by
?
can
a
short
delay.
STATUS INDICATOR
minimum time is 3:00 hours.
?
?
button to select
require.
Delay
The maximum
?
The door
Press Power button.
(":" blinks.)
?
?
Delay"
desired time.
-
Lights
Start/Pause button to stop the washer.
and fabric softener in the drawer.
detergent
whenever the door of the washer is locked.
?
and close the door.
the program you
-
starting
the
time of the
cycle
the
MAINTENANCE
Before
cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.
disposing of the appliance, cut off the power cable, destroy the plug, and disable the door lock to prevent
young children from being trapped inside.
When
The water inlet filter
?"
?
"
error
message will blink
on
the control
when water does not enter the
panel
If your water is very hard or contains traces of lime
We recommend cleaning it every few months.
dispenser.
clogged.
the water inlet filter may become
deposit,
2. Unscrew
1. Turn off the
water
the water
tap.
inlet hose.
3. Clean the
filter
a
4.
Tighten up
the inlet
using
hard
hose.
bristle
brush.
The drain pump filter
?
The drain filter collects threads and small
Check
regularly
that the filter is clean to
objects
ensure
left in the
smooth
laundry.
running
of your machine.
CAUTION
First drain
?
using
the drain hose and then open the pump filter to
Be careful when draining if the water is hot.
Allow the water to cool down before
1.
Open
the lower
Turn the drain
cover
plug (
cap
)
to
( )
pull
cleaning
2.
objects.
the drain pump filter.
Unplug the drain plug ( ),
allowing the water to flow out.
At this time
out the hose.
remove
prevent
use a
vessel to
water from
flowing
3. Remove out any foreign objects
from the pump filter ( ). After
turn the pump filter (
clockwise and insert the drain
cleaning,
onto the floor. When water does
plug (
not flow any more, turn the
Close the lower
pump filter
(
) open
)
to the
)
original place.
cover cap(
).
to the left.
3
1
2
21
MAINTENANCE
the
Cleaning
?
The
Dispenser
dispenser may
1
Open
the
need to be cleaned
dispenser
periodically
2
lid.
laundry
additive
build-up.
Lift the two-compartment
container, tilt slightly
leftward, and remove from
the main
3
dispenser.
Remove the caps
the siphon tube
covering
for the softener.
?
Once the two-compartment container is removed from the main dispenser, take it to a sink.
Run warm water and a soft brush or cloth over the two parts to remove any excess laundry additives.
?
Clean the main
illustrations in
NOTE
:
dispenser
reverse
area
order to
using water and a soft clothe. Once the main dispenser is clean,
replace the two compartment container to its original location.
The
?
follow the
use any cleaning substance on the main dispenser but water. It is possible for cleaning substances to
drain into the tub. If this should happen, set the washer for a rinse and spin cycle to remove any cleaning
Do not
substance from the washer before
22
due to
washing
doing
a
load of
laundry.
drum
?
If you live in
and it is not
a hard water area, limescale can continuously builds up in places where it cannot be seen
easily removed from the drum.
Over time the build-up of scale clogs appliances, and if it is not kept in check, these will eventually
have to be replaced.
?
Although the washing drum is made
(paper clips, safety pins, etc.) which
The
washing
of Stainless steel,
If you
?
Descaler could contain components that
?
Remove the spots with
?
Never
use
of rust
can
be caused
by
small metal articles
drum should be cleaned from time to time.
?
use
specks
have been left in the drum.
descaling agents, dyes,
steel wool.
a
or
bleaches, make
stainless steel
can
sure
damage part
cleaning agent.
they
are
of your
suitable for
washing
washing
machine.
machine
use.
MAINTENANCE
your washer
Cleaning
1. Exterior
Proper care of your washer
The outside of the machine
can
extend its life.
can
be cleaned with
water and a
warm
neutral, non-abrasive
household
detergent.
Immediately wipe off any spills. Wipe with a damp
Try not to damage the surface with sharp objects.
IMPORTANT: Do not
methylated spirit,
use
cloth.
solvents
or
similar
products.
2. Interior
around the washer door
opening, flexible gasket and
water-tight seal.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
Dry
door
glass.
These
areas
should
always
be clean to
ensure a
NOTE
:
Remove hard water
Winterizing
electrical cord into
4. Add 1
5. Set
gallon (3.8 )
spin cycle
freezing can occur
damage to the washer:
a
supply
Unplug
safe for
or
moved in
freezing temperatures,
nontoxic recreational vehicle
and let washer
electrical power cord,
spin
dry
(RV)
antifreeze to empty wash drum. Close door.
for 1 minute to drain out all the water.
expelled.
drum interior, and close door.
two-compartment container from the Dispenser. Drain any
compartments.
8. Store washer in
remove
an
water in
compartments and dry the
upright position.
antifreeze from washer after storage,
Do not add
follow these
electrical outlet.
7. Remove the
9. To
washing machines.
and drain water from hoses.
properly grounded
Not all of the RV antifreeze will be
6.
as
supply tap.
2. Disconnect hoses from water
Plug
where
an area
instructions to prevent
1. Turn off water
3.
cleaners labeled
instructions
If the washer is stored in
winterizing
deposits using only
run
empty washer through
a
complete cycle using detergent.
laundry.
23
TROUBLESHOOTING GUIDE
This
washing
machine is
equipped
with automatic
safety
functions which detect and
early stage and react appropriately. When the machine does not function
check the following points before you call the Service Department.
Possible Cause
Problem
Rattling
and
properly
clanking
noise
?
Foreign objects such as
safety pins may be in
or
or
diagnose problems
or
at
does not function at
an
all,
Solution
coins
Stop
drum
filter.
washer and check drum and drain
If noise continues after washer is restarted,
pump.
call for service.
Thumping
Vibrating
sound
?
noise
?
of balance.
This is normal.
load.
Have all the transit bolts and
packing
been removed?
?
Wash load may be unevenly
distributed in the drum.
?
Are all the feet
the
on
Water leaks
?
resting firmly
or
lathering
?
House drain
Too much
unsuitable
Water does not enter
washer
or
it enters
?
Water
in
slowly
Adjust
the
leveling
removing
wash load.
feet.
Check and
tighten
hose connections.
washer.
pipes
are
clogged.
Excessive
See Installation Instructions for
shipping bolts.
Stop washer and rearrange
ground?
Fill hose connection is loose at
tap
?
If sound continues, washer is probably out
Stop and redistribute wash
Heavy wash loads may
produce a thumping sound.
Unclog
drain
pipe. Contact plumber
detergent or
detergent.
supply
is not
adequate
Reduce detergent amounts
sudsing detergent.
or use
low
Check another tap in the house.
area.
?
Water
?
Water inlet hose is bent.
Straighten
?
The filter of the inlet hose
Check the filter of the inlet hose.
supply tap
completely open.
is not
Fully open tap.
hose.
clogged.
Water in the washer does
not drain or drains
24
if
necessary.
?
Drain hose is bent
?
The drain filter is
or
clogged.
Clean and
straighten
slowly
clogged.
Clean the drain filter.
the drain hose.
TROUBLESHOOTING GUIDE
Possible Cause
Problem
Washer does not start
?
Solution
Electrical power cord may not
plugged in or connection
be
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse is blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,
or a
power
outage has occurred.
If
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer won't
spin
?
Check that the door is
Close the door and press the
Start/Pause button. After pressing the
firmly
shut.
Start/Pause button, it may take a few
moments before the clothes washer
begins to spin. The door
spin can be achieved.
Wash
cycle
time
delayed
?
The
washing
time may vary
the amount of
laundry,
by
water
pressure, water temperature,
and other using conditions.
Dry problem
?
Does not
dry
must lock before
If the imbalance is detected
suds
or
if the
removing program operates,
the
wash time shall be increased.
Do not overload.
Check that the washer is
to extract
adequate
draining properly
water from the load.
Clothes load is too small to tumble
properly.
Add
a
few towels.
25
TROUBLESHOOTING GUIDE
Possible Cause
Problem
?
Water
in
is not
supply
Solution
adequate
Check another tap in the house.
area.
?
Water
?
Water inlet hose is bent.
Straighten
?
The filter of the inlet hose
Check the filter of the inlet hose.
supply taps
completely open.
not
are
Fully open tap.
hose.
clogged.
?
Clean and
Drain hose is bent
or
straighten
the drain hose.
clogged.
Clean the drain filter.
?
The drain filter is
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning.
appliance
clogged.
has
an
imbalance detection and
or
2 similar items to
help
load to allow proper
correction system. If individual
heavy articles are loaded (bath
mat, bath robe, etc.) this
system may stop spinning
even
the
if the imbalance is too
even
?
or
spin cycle altogether
after several
great
spin
Is the door opened or
completely closed?
starts.
Close the door
not
If
Unplug
?
The water overfills due to the
faulty
water valve.
completely.
is not released, call for service.
the power
plug
and call for service.
Close the water tap.
Unplug the power plug.
Call for service.
?
The water level
sensor
malfunction.
?
Overload in motor.
?
Overload in motor.
?
The washer
experienced
a
Restart the
cycle.
power failure.
?
Check water
supply.
Turn the tap on
I f
is not released,
and call service.
26
unplug power plug
TERMS OF WARRANTY
What Is Not Covered:
?
Service trips to your home to teach you how to
?
If the
?
If the fault is caused
by accident, neglect, misuse
?
If the fault is caused
by factors other than normal domestic
use
the
product.
product is connected to any voltage other than that shown
or
on
the
rating plate.
Act of God.
use or use
in accordance
with the owner's manual.
?
Provide instruction
?
If the fault is caused
?
Noise
or
on use
of
product
or
change the set-up of the product.
by pests for example, rats
vibration that is considered normal for
or
cockroaches etc..
example water drain sound, spin sound,
warming beeps.
the installation for
example, levelling the product, adjustment of drain.
?
Correcting
?
Normal maintenance which recommended
?
Removal of
example, grit, nails, bra wires, buttons etc.
in or correct house
?
Replace fuses
?
Correction of unauthorized repairs.
?
Incidental
with this
If this
by the owner's manual.
foreign objects / substances from the machine, including the pump and inlet
hose filter for
?
or
or
wiring
or
correct house
consequential damage to personal property caused by possible defects
appliance.
product is used for commercial purpose,
(Example
plumbing.
:
Public
places such
as
it is not warranted.
public bathroom, lodging house, training center,
dormitory)
If the
product is installed outside the normal service
transportation involved
defective
in the
repair of the product,
part, shall be borne by the
area, any cost of
or
the
replacement of
a
owner.
27
Download PDF

advertising