LG | WD-80160FU | LG WD-80160FU Owner’s Manual

P/No.: 3828ER3021W
Washing
Machine
OWNER'S MANUAL
WD-10160(5)F
WD-80160F
WD-65160F
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
water level and
consumption.
Child-Lock
The Child-Lock
pressing
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
C
evenly
distributes
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry articles that
have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
has completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
other appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S
pecification
Power
If the
plug
supply cord is damaged,
replaced by the
it must be
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drum
Door
Lower
cover
Adjustable
Lower
Drain pump filter
Drain
cover
cap
plug
Name
Power
supply
:
Front
:
220-240V~,50Hz
Size
:
Weight / Max.Watt
Wash capacity
Spin speed
:
Water
consumption
Permissible water pressure
The appearance and
loading washing
machine
600mm(W) 600mm(D) 850mm(H)
67kg / 2200W
: Refer to the Rating Label
: No Spin/400/500/650[WD-65160F]
No Spin/400/600/800[WD-80160F]
No Spin/400/800/1000[WD-10160(5)F]
:67
(9.6 /kg)
: 0.3-10kgf/
(30-1000kPa)
specifications
may be varied without notice to raise the units
quality.
Accessories
Spanner
4
feet
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance
is fitted with transit bolts to
Removing
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
bungs.
?
?
If
they
are
not
removed, it may
use.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
supplied.
4. Close the holes with the caps
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
3.
extension cord
cord is
5. The
appliance
must be
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
use an
2. If the
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried
by inexperienced persons may cause injury or serious malfunctioning. Contact your local
out
service center
?
?
Do not install your washing machine in rooms where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be
impaired at temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store
the washing machine at room temperature for a few hours before putting it into operation.
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
supply
hose
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip
or
crossthread when
connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
Hose connector
?
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Make sure that there is no kink
hose and that it is not crushed.
on
the
7
nstallation
I
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose (Single inlet models)
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
Connector
tap is
Water
hose
Middle
guide plate.
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
if the machine is to be left for any length of time
floor drain(gully) in the immediate vicinity.
stopcock
if there is
especially
When disposing
(e.g. holiday),
no
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
door lock to
of suffocation !
all
Keep
packaging
well away from children
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
ca.
105
cm
?
Laundry
ca.
100
tub
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
a
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
all.
10
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
pale
colors and whites. Wash
discoloration of white etc. If
causing
lightly soiled
can occur
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Separate
Separate
Lint
Wash lint
Caring
before
separately as dye and lint
possible, do not wash heavily
clothes
according
to amount of soil.
white fabrics from colored fabrics.
and lint collectors
producers
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
for
main wash
Fabric
softener
Detergent
()
for
pre wash
Main wash
only
(Causing
a
Detergent
()
?
()
Use powder
loading
?
motor.
U
?
Detergent
for water
?PreWash+MainWashU
detergent only for the front
washer.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
F
unction
Recommended
according
courses
Fabric
to the
laundry type
Maximum
Proper
Program
Energy
Option
Type
First check if
Load
Temp.
laundry
is machine
in
kWh
Minutes
Pre Wash
95˚C
Time Save
washable.
Rinse+
(white cotton, linen
sheets...)
Cotton
Time
in
Rating
2.74
163
Rating
1.33
161
Less than
0.45
82
0.41
56
0.28
58
0.03
71
0.35
30
Crease Care
towel and
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
60˚C
Time Save
(Cold, 30˚C,
40˚C)
Rinse+
soiled white
Crease Care
cotton(underwear...)
Synthetic Polyamide, Acrylic,
Polyester
Delicate
Delicate
laundry
easily damaged
(silk, curtains...)
Wool
Machine washable
woolens with pure
new wool only
Hand
"Hand Wash" marked
Wash
delicate and wool
laundry
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
If the
Pre Wash
40˚C
(60˚C, Cold,
30˚C)
Time Save
Rinse+
Time Save
(40˚C, Cold)
Rinse+
30˚C
Time Save
(40˚C, Cold)
Rinse+
Cold(30˚C,
40˚C)
Time Save
laundry is heavily soiled, "Pre
Synthetic Program.
kg
Crease Care
30˚C
30˚C(40˚C,
Cold)
3.5
Rinse+
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
Rinse+
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
Cotton and
Rinse+: Used to introduce
an
additional rinse, which may assist in
removing
traces of
detergent
residue.
13
H
ow to use
1. Cotton
washer
selected upon power
?
Press the
Power(
?
Press the
Start/Pause(
?
2. Manual
automatically
) button
to start.
) button.
?
?
Initial condition
-
Wash
:
main wash
-
Rinse
:
3 times
-
Spin : 1000 rpm [WD-10160(5)F]
Water temperature
Program : Cotton
14
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
conditions, please
refer to the page15~page20
800 rpm [WD-80160F]
650 rpm [WD-65160F]
-
Press the
For selecting the each
?
-
Selecting
on.
:
60˚C
Press the
Start/Pause(
) button.
H
ow to use
washer
Drain
(1)
(2)
(3)
Button
:
Button
:
Power
Program
Button
:
Start/Pause
(4)
(5)
(6)
Button
:
Button
:
Button
:
Time
Child Lock
(7)
(8)
(9)
Delay
Option
Option
Button
:
Button
:
Temp.
Spin
Option
2. Time Save
?
This
of
?
To
a
option
can
be used to reduce the time
wash program.
this
use
button
press the Time Save
before the wash program is
option
once
started.
?
By pressing the Option button, all
Option functions may be selected.
?
This
option
is not available with Quick 30
program.
-
-
-
-
Pre Wash
3. Rinse+
Time Save
Rinse
+
?
Crease Care
?
If the
laundry
course
?
is
rinse, which may assist in
traces of
heavily soiled,
"Pre Wash"
is effective.
are
residue.
the rinse time
increased.
4. Crease Care
?
Pre Wash is available in Cotton and
detergent
By selecting Rinse+ function,
and the rinse water
1. Pre Wash
?
Used to additional
removing
If you want to prevent crease, select this
button with spin speed.
Synthetic.
The
required lamp
identification.
will
light up for
15
ow to use
H
washer
Spin
2. No
650
500
spin
6
400
?
If
spin is selected,
draining water.
no
The required lamp
identification.
[WD-65160F]
?
[WD-80160F]
the
By pressing
can
1.
Spin button,
[WD-10160(5)F]
the
spin speed
?
be chosen.
program
?
is available
as
to the
according
Cotton/Synthetic/Wool/Hand
Rinse Hold-No
Spin-400-500-650
WD-80160F
-
Cotton/Synthetic/Wool/Hand
Wash/
Delicate/Quick 30
Rinse Hold-No
?
Spin-400-600-800
WD-10160(5)F
-
Cotton/Synthetic/Wool/Hand
Wash/
Quick 30
Rinse Hold-No
-
Spin-400-800-1000
Delicate
Rinse Hold-No
16
by pressing
the
To
proceed through
spin
button
Spin-400-800
The required lamp
identification.
will
after
to a drain or
the rinse hold function is
Program button and Spin
required program.
(Spin or Pump)
follows.
Wash/Delicate/Quick 30
?
Is selected
repeatedly
machine; suspended in the water
rinse without entering into spin.
WD-65160F
-
light up for
this function leaves clothes in the
Spin selection
Spin speed
stops after
3. Rinse Hold
?
?
will
the washer
a
spin, once
completed using to
button to the
light up for
H
ow to use
Water
Temp.
By pressing
?
washer
the
Child Lock
Temp.
button, the water
temperature can be
selected.
If you choose to lock the buttons on the control
to prevent tampering this function
Cold
-
assembly
-30˚C/40˚C/60˚C/95˚C
may be selected.
1. Child Lock
?
1. Water
?
Water
below
-
-
Temperature
temperature
according
can
be selected
can be set by pressing and
holding the the Option and the Temp.
button simultaneously.
as
to the program.
Cotton
Cold-30˚C-40˚C-60˚C-95˚C
Synthetic
?
Cold-30˚C-40˚C-60˚C
-
Child Lock
Delicate & Wool & Quick 30 &
Hand Wash
?
Cold-30˚C-40˚C
The
more
to the page13.
detailed
are
inoperable
again.
required temperature lamp
identification.
For the
When child lock is set, all buttons
except power button.
To deactivate Child Lock system, press the
Option and the Temp. button simultaneously
will
light up for
information, please refer
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both the
together
once
Option
again.
and the
Temp.
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button again.
Change
the desired
program
?
The child lock
is
errors occur.
be set at any time and it
canceled when operational
can
automatically
Also Child Lock works when
power is off.
17
ow to use
H
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
"Time
Delay"
-
-
-
Turn
on
the water
tap.
laundry and close the door.
Place the detergent and fabric softener
(Program)
Load
in
the drawer.
?
?
How to set "Time
-
Delay"
-
Press Power button.
Press the
Program button to select
the program you require.
Press Time Delay button and set the
Press the Start/Pause button.
?
When Start/Pause button is
By pressing
the
pressed, the
automatically selected.
Program button,
the
19:00 hours and the minimum time is 3:00
"Cotton-Synthetic-Delicate-WoolHand Wash-Quick 30- Rinse+Spin-Drain".
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
Each
pressing of the button
delay by one hour.
To cancel the time
delay,
advances
on
press the Power
button.
?
Program
If Time
time
?
to the
program is selected in order of
hours.
?
according
up to indicate selected
Cotton program is
-
?
Lamp will light
1.
(":" blinks.)
?
available
program.
desired time.
-
are
laundry type.
?
-
8 programs
Time
Delay
is
time' from the
'expected
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
According to
the condition
temperature, the
washing time
18
delayed
may vary.
of water supply and
time and the actual
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-Cotton
-Wool
-Synthetic
-Hand Wash
-Delicate
-Quick
-Rinse+Spin
30
-Drain
ow to use
H
washer
Start/Pause
Power
1. Power
1. Start
?
This
Start/Pause( ) button is used
cycle or pause the wash cycle.
to start
?
2. Pause
?
If
?
When in
Start/Pause(
)
button.
at the end of the wash
Program
When the Power button is
pressed,
the
ready for Cotton program. And
the other initial conditions as follows.
?
cycle.
on
washer is
after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
?
Pause, the power is turned off
automatically
?
2. Initial
temporary stop of wash cycle is needed,
press the
Press the Power button to turn power
and off
wash
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD-65160F]
-Cotton
Program/Main Wash/
Normal Rinse/650 rpm/60˚C
[WD-80160F]
-Cotton
Program/Main Wash/
Normal Rinse/800 rpm/60˚C
[WD-10160(5)F]
-Cotton Program/Main Wash/
Normal Rinse/1000
rpm/60˚C
19
ow to use
H
washer
Display
4. Time left
?
?
During washing cycle, the remaining
washing time is displayed.
Recommended program
by
manufacturer.
1.
?
Special function display
"
If the machine encounters
operation;
displayed
a
fault
-
during
-
the associated fault will be
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
sensing
Problem of
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
-
-
during
:
overfilling
around 2 hours and
Synthetic
around 1 hour and
:
Delicate
:
around 56 minutes
Wool
:
around 58 minutes
Hand Wash
around 1 hour and
:
11 minutes
-
:
"
"
fault
Cotton 60˚C
the associated fault will be
Water pressure
:
a
around 2 hours and
22 minutes
diagnosis display
If the machine encounters
?
:
41 minutes
-
2. Self
Cotton 95˚C
43 minutes
When child lock is selected, the
is displayed.
"
?
-
error
-
water
-
?
trouble
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
The
:
:
around 19 minutes
washing time may vary by the
laundry, water pressure,
amount of
water
temperature and other
washing
Water temperature trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
Quick 30
?
If
an
conditions.
unbalanced load is detected
if the suds
or
removing program
operates, the wash time may be
3.
?
Completion of washing
When
is
washing cycle completed,
is displayed on the "Multi
display".
"
"
20
extended.
(Max. increasing
time is
45minutes.)
aintenance
M
Before
the washer interior,
cleaning
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
-"
"error message will blink
detergent
-
If your water is very hard
become
on
the control
when water does not enter the
panel
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your machine.
the drain and then open the pump filter to
remove
whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
the door in
2.
this time
plug(
water
the hose.
cleaning
the drain pump,
use a
flowing
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
)topullout
an
vessel to
on
3. Remove any
At
prevent
to the floor. When
foreign
from the pump filter
cleaning,
(
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
After
turn the pump filter
water does not flow any more, turn
( )
material
( ).
original place.
cover
cap.
100
3
1
3
2
2
21
)
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
deposit
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
recess
also accumulate inside the
with
occasionally
an
recess
?
Once you have finished cleaning,
rinse cycle without laundry.
?
If you live in a hard water area, limescale may
seen and thus not easily removed.
The
washing
replace
the drawer and
run a
drum
Over time the build up of scale
be replaced.
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
?
The
drum should be cleaned from time to time.
?
If you
?
Although
the
which should
old toothbrush.
washing
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any
Never
22
use
spots
with
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
off any
Immediately wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
spills. Wipe
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
a
opening,
flexible
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
gasket
and door
glass.
hot water.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
cord, dry the drum interior, and close the door.
drawer drain and
dry excessive
water from the
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
clogged.
are
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
T
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
hose(s) clogged.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
unbalance
detection and correction
system.
individual
are
heavy
articles
If
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
bath mat, both robe,
?
Is the door
opened?
Close the door.
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
26
help
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
(ex.
?
appliance
or clogged.
clogged.
Water level
Close the water tap.
Unplug the power
Call for service.
sensor
has malfunction.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
by
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF

advertising