LG | WD-80185TP | LG WD-80185TP Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-8018(0~9)SP
WD-1018(0~9)SP
WD-8018(0~9)NP
WD-1018(0~9)NP
WD-8018(0~9)TP
WD-1018(0~9)TP
WD-8030(2~9)SP
WD-1030(2~9)SP
WD-8030(2~9)NP
WD-1030(2~9)NP
WD-8030(2~9)TP
WD-1030(2~9)TP
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
water level and
consumption.
Child-Lock
The Child-Lock
system has been used
any button to
pressing
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
By sensing the amount of load and balance, it
to minimize the spinning noise level.
evenly
distributes load
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
washer,
Do not install
be
follow basic
or
precautions, including
Do not
tamper with controls.
?
Do not
repair
?
published user-repair
instructions
that you understand and have the skills to carry
?
out.
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
?
supervision is necessary if this appliance
by or near children.
Do not allow children to play on, with, or inside
this or any other appliance.
moving.
completely stopped.
laundry process
retardant of fabrics.
Do not
can
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
or
Do not slam the washer door closed
or
try to
?
To minimize the
unplug
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
distribution
hang
Never reach into washer while it is
The
dry
force the door open when locked. This could
result in damage to the washer.
Close
until the drum has
?
?
etc.
Do not leave the washer door open.
An open door could entice children to
the door or crawl inside the washer.
or
instructions.
as
is used
?
using
in, washed in, soaked in,
combustible
recommended in the user-maintenance
?
to persons when
Do not wash
cleaned
or
or
injury
following:
replace any part of the washer
attempt any servicing unless specifically
instructions
or
store the washer where it will
exposed to the weather.
?
or
the
on
Wait
reduce the flame
?
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
push down the door excessively,
topple over the washer.
when washer door open.
This could
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
MODEL
ITEM
WD-1018(0~9)SP/WD-1030(2~9)SPWD-1018(0~9)NP/WD-1030(2~9)NPWD-1018(0~9)TP/WD-1030(2~9)TP
WD-8018(0~9)SP/WD-8030(2~9)SPWD-8018(0~9)NP/WD-8030(2~9)SPWD-8018(0~9)TP/WD-8030(2~9)SP
Front
Name
Power
/ Max. Watt
Weight
Wash
,
600mm(W) 360mm(D) 850mm(H) 600mm(W) 440mm(D) 850mm(H) 600mm(W) 550mm(D) 850mm(H)
55kg/2100W
60kg/2100W
refer to the
capacity
Water
42L
consumption
rating
65kg/2100W
label
60L
Permissible water
0.3
Pressure
Spin Speed
machine
220-240V~ 50Hz
supply
Size
loading washing
No Spin/400/500/600/800
No Spin/400/600/800/1000
-
10
kgf /
cm2
72L
(30~1000kPa)
[WD-8018(0~9)SP/8030(2~9)SP/8018(0~9)NP/8030(2~9)NP/8018(0~9)TP/8030(2~9)TP]
[WD-1018(0~9)SP/1030(2~9)SP/1018(0~9)NP/1030(2~9)NP/1018(0~9)TP/1030(2~9)TP]
Accessories
Inlet hose
4
:
1EA
Spanner
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
3.
extension cord
cord is
5. The
?
?
appliance
must be
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
use an
2. If the
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
supply
hose
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip
or
crossthread when
connecting
Inlet hose to the valve.
If the
water
1000kPa,
a
supply pressure is more than
decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
?
water leaks.
Check water tightness of washing
machine connections by turning the
tap
completely on.
?
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
tap
Make sure that there is no kink
hose and that it is not crushed.
on
the
Cold
Cold
Hot(option)
water
When your washer has two valves,
tap
?
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Normal
Tap without
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Normal
Tap without
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
tighten
?
In
case
large
the diameter of the
remove
the
type inlet hose (Single inlet models)
Push the upper connector up till
the rubber
screw.
the 4
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
tap is
guide plate.
Turn the middle connector not
?
to have water leaked.
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
?
tap. Then pull the
down, pushing the
down.
Your machine
comes
with
only
cold water connection.
?
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
8
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
?
The drain hose should not be
higher than 100
Proper securing
cm
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
?
to
leakage.
When the drain hose is too
long,
do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
Adjusting the washing machine level
properly prevents excessive noise and
1.
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
a
Lock Nut
3.
Adjust the
feet to
ensure
that the
machine is level and
Higher
Adjustable
Lower
steady on the floor.
positioning, tighten the locknuts for
stability.
After
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
all.
(Please,
move
check both
the
up and down at
of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
?
Main wash
?
only
2.
)
Detergent
usage may need to be
temperature,
MAX
MAX
125 ml
125ml
Full load
can cause
early dispensing
?
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Softener with
high consistency
should be
mixed with water and melt away agglomeration
in order to prevent softener cap being
blocked.
NOTE
Do not pour fabric softener
on the clothes
directly
12
to
3/4 of the normal amount.
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
:
Minimum load
clothes.
?
according
:
manufacturer's recommendation.
of the fabric softener which could stain
?
adjusted
hardness,
Tips
Do not exceed the maximum fill line.
Overfilling
water
results, avoid oversudsing.
Part load
?
a
size and soil level of the load. For best
Adding Fabric Softener
(
(Causing
Use powder detergent only for the front
loading washer.
for water
?PreWash+MainWash
motor.
at
H
ow to use
1. Cotton
washer
selected upon power
?
Press the
Power(
?
Press the
Start/Pause(
?
2. Manual
automatically
) button
to start.
) button.
?
?
Initial condition
-
-
-
Wash
:
main wash
Rinse
:
3 times
Program: Cotton
14
) button
to start.
each button.
conditions, please
refer to the page15~page20
WD-8018(0~9)SP/WD-8030(2~9)SP
WD-8018(0~9)NP/
WD-8030(2~9)NP
WD-8018(0~9)TP/WD-8030(2~9)TP
-
Power(
Select the conditions which you want to
use, by turning the program dial and
pressing
Spin : 1000 rpm
WD-1018(0~9)SP/WD-1030(2~9)SP
WD-1018(0~9)NP/WD-1030(2~9)NP
WD-1018(0~9)TP/WD-1030(2~9)TP
Water temperature
Press the
For selecting the each
800 rpm
-
Selecting
on.
:
60˚C
?
Press the
Start/Pause(
) button.
ow to use
H
washer
(1)
Dial
(2)
Button
:
Start / Pause
(Pre
(3)
Button
:
Option(Bio/Rinse+)
Button
:
(4)
Program
(5)
Button
:
Option
Wash/ Crease
:
Care)
(6)
Button
:
Time
(7)
Button
:
Power
Delay
Spin
Time
Delay
?
If Time
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
?
1. Time
Delay
?
Preparing washing before starting
"Time
-
-
-
Turn
Load
the water
laundry and close the door.
detergent and fabric softener
the drawer.
?
How to set "Time
-
-
-
Delay"
Program
To cancel the time
Time
delay,
advances
on
press the Power
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
or
in
?
Press Power button.
Turn the
?
tap.
Place the
pressing of the button
delay by one hour.
button.
Delay"
on
Each
time
is
to the
selected
According to
the condition
temperature, the
washing time
delayed
of water supply and
time and the actual
may vary.
dial to select
the program you require.
Press Time Delay button and set the
desired time.
-
Press the Start/Pause button.
(":" blinks.)
15
H
ow to use
washer
Child Lock
Water
Temp.
If you choose to lock the buttons on the
control assembly to prevent tampering this
function may be selected.
1. Child Lock
?
Child Lock
Option
can
button
be set by pressing
simultaneously.
the two
?
the
By turning
temperature
-
-
?
?
When child lock is set, all buttons
are
inoperable
except power button.
To deactivate Child Lock system, press the
two option button simultaneously again.
be selected.
Cold
30°C, 40°C, 60°C,
1. Water
?
Water
95°C
Temperature
temperature
according
can
be selected
to the program.
The
required temperature lamp
for identification.
?
To
change
to the desired program,
whilst in child lock mode.
1. Press both the two
once
Option together
again.
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button again.
Change
the desired
program
?
The child lock
can
be set at any time and
it is
automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
16
the water
Program Dial,
can
For the
more
refer to
the page13.
detailed
will
light up
information, please
H
washer
ow to use
Spin
2. No
If
?
no
after
spin
spin is selected,
draining water.
The required lamp
identification.
will
the washer
stops
light up for
[WD-8018(0~9)SP/8030(2~9)SP/8018(0~9)NP[WD-1018(0~9)SP/1030(2~9)SP/1018(0~9)NP
3. Rinse Hold
/8030(2~9)NP/8018(0~9)TP/8030(2~9)TP] /1030(2~9)NP/1018(0~9)TP/1030(2~9)TP]
?
By pressing the Spin button,
spin speed can be chosen.
?
1.
?
is available
Spin Speed
as
?
according
by pressing
this function leaves clothes in
To
proceed through
once
to the
using
follows.
The
button
to
a
drain
spin,
completed
required
or
Spin
button to the
will
light up for
Spin 400 500 600
Delicate
600 Rinse Hold No
-
to
required lamp
identification.
/Hand Wash
-
spin
program.
Cotton/Rinse+Spin/Synthetic/Wool
800 Rinse Hold No
the
the rinse hold function is
WD-8018(0~9)SP/8030(2~9)SP/8018(0~9)NP/ (Spin)
8030(2~9)NP/8018(0~9)TP/8030(2~9)TP
-
Spin 400 500
Quick 30
400 500 600 800 Rinse Hold No
?
Is selected
repeatedly
the machine; suspended in the water
after a rinse without entering into spin.
Spin selection
program
?
the
Spin
WD-1018(0~9)SP/1030(2~9)SP/1018(0~9)NP/
1030(2~9)NP/1018(0~9)TP/1030(2~9)TP
-Cotton/Rinse+Spin/Synthetic/Wool/
Hand Wash
1000 Rinse Hold No
-
800 Rinse Hold No
-
Spin
400 600 800
Delicate
Spin 400 600
Quick 30
400 600 800 1000 Rinse Hold No
Spin
17
washer
ow to use
H
Program
Option
By pressing the Option button, all
Option functions may be selected.
?
-
Bio
-
Pre Wash
-
Rinse
+
8 programs
?
-
Crease Care
are
available
according
to the
laundry type.
1. Bio
Lamp
?
will
up to indicate selected
light
program.
?
If you want to eliminate
protein
stains(milk, blood, chocolate...), you may
select Bio function by pressing the option
button. [You can select Bio function when
temperature is higher than 60˚C in cotton
and Synthetic.]
1.
?
Program
When Start/Pause button is
Cotton program is
-
By turning
the
pressed, the
automatically selected.
Program dial,
selected in order of
Quick 30
2. Rinse+
Used to additional rinse, which may assist
removing traces of detergent residue.
?
in
By selecting Rinse+ function,
?
time and the rinse water
are
the rinse
increased.
3. Pre Wash
Wash
If the
laundry
course
?
is
heavily soiled,
"Pre Wash"
Pre Wash is available in Cotton and
Synthetic.
The
required lamp
will
light up for identification.
4. Crease Care
?
If you want to prevent crease, select this
button with spin speed.
18
the program is
Delicate
Rinse+Spin Drain
Synthetic".
Hand
Wool
2. Course
-
is effective.
Cotton
Regarding to the laundry type for each program
Please refer to the page13.
-
?
"
-
Cotton
Quick 30
Synthetic
-
-
-
Delicate
Wool
Hand Wash
-
-
Rinse+Spin
Drain
ow to use
H
washer
Start/Pause
Power
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
if the
power button should be
2. Initial
2. Pause
?
If temporary stop of wash cycle is
needed, press the Start/Pause button.
?
When in Pause, the power is turned off
automatically after 4 minutes.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
at the end of the wash
?
Program
When the Power button is
pressed,
ready
So, if you
want to advance into the
the
for Cotton program. And
the other initial conditions as follows.
?
washer is
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-8018(0~9)SP/8030(2~9)SP/8018(0~9)NP/
8030(2~9)NP/8018(0~9)TP/8030(2~9)TP]
-
Cotton 60˚C / 800 rpm
[WD-1018(0~9)SP/1030(2~9)SP/1018(0~9)NP/
1030(2~9)NP/1018(0~9)TP/1030(2~9)TP]
-
Cotton 60˚C / 1000 rpm
19
H
washer
ow to use
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
"
"
?
4. Time left
When time
the
delay is selected, it shows
remaining times to finish the
?
selected program.
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
2. Self
diagnosis display
-
?
If the machine encounters
operation,
displayed.
a
fault
during
-
the associated fault will be
-
-
"
"
:
"
"
"
"
"
"
Problem of
:
Door is not closed
:
Water inlet trouble
-
water
-
-
-
trouble
Drainage
:
Unbalanced load
:
Water temperature trouble
"
"
overfilling
error
:
"
"
sensing
:
"
"
Water pressure
by
manufacturer.
-
?
Cotton 95˚C : around 2 hours and 27 minutes
Cotton 60˚C
:
around 2 hours and 35 minutes
Synthetic
:
around 1 hour and 22 minutes
Delicate
:
around 56 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 20 minutes
Drain : around 1 minutes
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45minutes.)
20
M
aintenance
Before
cleaning
the washer interior,
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
-"
"
detergent
-
message will blink
error
If your water is very hard
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
any threads
or
Open the lower cover
cap( )byusinga
2.
left in the
smooth
laundry.
running of your
machine.
the drain and then open the pump filter to
remove
whatever
objects.
Be careful when
1.
objects
ensure
draining
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
vessel to
on
prevent
to the floor. When
( )
open to the left.
cleaning,
material
foreign
from the pump filter
( ).
After
turn the pump filter
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
2
3
2
21
)
aintenance
M
Dispenser
After
a
while
drawer
detergents
and fabric softeners leave
deposit
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
The drawer
Detergent
can
be cleaned
max
recess
also accumulate inside the
with
occasionally
an
recess
?
Once you have finished cleaning,
rinse cycle without laundry.
?
If you live in a hard water area, limescale may
seen and thus not easily removed.
The
washing
replace
the drawer and
run a
drum
Over time the build up of scale
be replaced.
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
?
The
drum should be cleaned from time to time.
?
If you
?
Although
the
which should
old toothbrush.
washing
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any
Never
22
use
spots
with
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
spills. Wipe
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
a
opening,
flexible
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
gasket
and door
glass.
hot water.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
cord, dry the drum interior, and close the door.
drawer drain and
excessive water from the
dry
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T
roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
hose(s)
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
are
The filter of the inlet
Solution
clogged.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
imbalance
detection and correction
system. If
individual
are
heavy
articles
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
bath mat, both robe,
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
26
help
etc.) this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
(ex.
?
appliance
or clogged.
clogged.
Water level
Close the water tap.
Unplug the power
Call for service.
sensor
has malfunctioned.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the product
rating plate.
is connected to any
If the fault is caused
If the fault is caused
voltage
other than that shown
by accident, neglect, misuse
by
product.
or
on
the
Act of God.
factors other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
by
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
(Example
wiring
:
is used for commercial purpose, it is not warranted.
Public
places
such
as
public bathroom, lodging house, training
center, dormitory)
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828EN3805B
Download PDF