LG | WF-T7510TC | LG WF-T7510TC Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T(S,C)550(~2)0(~5)P(P,H,C)
WF-T(S,C)650(~2)0(~5)T(P,H,C)
WF-T(S,C)750(~2)0(~5)T(P,H,C)
WF-T(S,C)750(~1)0(~9)P(P,H,C)
WF-T(S,C)850(~1)0(~9)T(P,H,C)
WF-T708TC, WF-T868TC(H)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open
rinse or spin cycles, the operation stops for safety.
during
the wash,
Fuzzy logic control
A built-in load
automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal water level
and washing time.
sensor
SENSING
START
SETTING
Laundry Sensor
WASHING
Optimum
Washing
Water Level Sensor
Condition
Advanced
AUTO
POWER
OFF
technology is built into
ensures the best washing result.
Turbo drum
When "Punch
the Electronic Control
System
which
washing (option)
washing wings turn, the washing
opposite direction. This makes the both
sides current of water which improve washperformance by rubbing clothes strongly.
+
3"
tub turns in the
Applied
3
models : WF-T
Step washing
3 step
washing
makes the best
Rubbing and
Shaking
Rubbing
ATTENTION
:
washing performance with
Be
sure
low
tangling.
Shaking and
Disentangling
to remove the unit from the carton
machine will not be able to
operate properly.
base, otherwise the
C
ontents
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
Information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
Special
Detergent,
Bleach and Softener 8
Guide for Stain Removal
Function of each Button
Washing Programs
Fuzzy
Wash
Installation
Care and Maintenance
Troubleshooting
Terms of
Warranty
Specification
(Normal Wash)
14
14
Wool Wash
14
Soak Wash
Economy
Options
12
Jean Wash
Speedy
Additional Function
11
14
Wash
14
Delay Start (Reservation)
Wash
16
Option Washing
17
Other useful Functions
18
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
19
Leveling
Supply
Hose
Method
20
23
24
Cleaning
and Maintenance
25
Common
washing problems
27
Troubleshooting
28
Terms of
29
Warranty
Specification
30
4
S
afety
information
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the
shock, or to prevent property damage, personal injury, or loss of life.
For your
Introducin
risk of fire
or
explosion, electric
Save these instructions.
?
WATER HEATER
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more.
Hydrogen gas can be explosive under these circumstances. If the
hot water has not been used for two weeks or more, prevent the possibility of damage or injury
SAFETY
by turning on all hot water faucets and allowing them to run for several minutes. Do this before
using any electrical appliance which is connected to the hot water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
smoke or use an open flame or appliance during this process.
PROPER
?
The base opening must not be obstructed by carpeting when the washing machine is installed on
?
Install or store where it will not be exposed to temperatures below freezing or exposed to the
INSTALLATION
a
carpeted floor.
weather.
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
?
YOUR
?
LAUNDRY
AREA
?
Must be positioned so that the plug is accessible.
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this
to
WHEN USING
THE WASHER
?
?
?
?
?
play
on,
appliance is used by or near children. Do not allow children
with, or inside this or any other appliance.
Use this
appliance only for its intended purpose as described in this Owner's Manual.
Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric
shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before attempting any maintenance or cleaning.
NOTE:
Pressing Power button to turn off does NOT disconnect the appliance
from the power supply.
WHEN NOT IN
?
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
?
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or
USE
?
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before discarding
a
washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
Do not attempt to repair or replace any part of this
appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
?
skills to carry out.
Do not tamper with controls.
5
I
dentification of Parts
Body
POWDER DETERGENT
BOX FOR DELAYED
*
WASHING
()
WATER SUPPLY
HOSE
Make
sure
the water
does not leak.
*
SOFTENER INLET
Softner will
automatically
flow into the tub.
*
POWER PLUG
()
If the
supply cord is
damaged, it must be
replaced by the
INLET HOLE FOR
BLEACH
manufacturer
()
or
its service agents
or
similarly qualified
person in order to
avoid a hazard.
FUNCTION SELECTOR
TUB
LINT FILTER
Clean
linting
START/PAUSE
BUTTON
Use to start
or
regularly
on
to
stop
the clothes
load.
stop the
washing machine
temporarily.
*
DRAIN HOSE
for pump model
Check if the drain hose
is
hung up before
operating the
washing machine.
*
ADJUSTABLE LEGS
Use to level the
DRAIN HOSE
for non pump model
washing
machine for correct balance
&
spin operation.
BASE
Accessories
Water
supply
hoses
Drain hose
Anti-rat
cover
or
or
1 Each for cold and
hot water
Note
Part
can
be different
according to
the model.
or
(option)
Introducin
6
Function
Information
Our machine provides various washing methods which suits various conditions and
types of laundry.
Introducin
Different
types of laundry washing
Fuzzy(Normal)
Wash
Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page14)
Use this
Jean Wash
Use this
Program for heavily soiled durable garments e.g. overalls, jeans.
heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
to
(refer page14)
Thick and
Wool Wash
Delicate clothes
(lingerie, wool, etc.)
which may be
The fibers of machine washable woolens have been
easily damaged can be washed.
(refer to page14)
specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
?
?
?
?
When
washing woolens use a mild detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
tumble action of a
(The heat and
of woolen
dryer may
shrinkage felting
garments.)
underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
cause
or
Some wool
Washing according
Economy
to the condition of
laundry
Wash
Economy wash can be selected to wash lightly soiled clothes of less than 2.0 kg in a
(refer to page14)
Speedy
short time.
Soak Wash
Speedy Soak Wash is designed to maximize washing performance and can be selected to wash heavily
soiled laundry with Fuzzy or Jean Program.
(refer to page14)
Other
washing
Delay
method
start Wash
Delay start Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly.
(refer to page16)
Wash
One
option
or more
Option
wash
options
can
be selected for
Fuzzy
and Jean
washing program. (refer to page18)
Wash
When the
needs
only Spin, Rinse/Spin, Rinse, Wash/Rinse, Wash, Wash/Rinse/Spin,
Speedy Soak/Wash/Rinse/Spin. (refer to page17)
user
7
Preparation
Before
Washing
BeforStaingWsh
Care Labels
*
care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for a
Sort clothes into loads that can be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
results, different fabrics need to be washed in different ways.
To get the best
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
coins,
Pretreat any dirt and stains.
sure the clothes are washable in water.
?
Make
?
Check the
?
on
stains
or
heavy
soil
Pretreat shirt collars and cuffs with
Before
?
WIRE
washing instructions.
Remove tissue in pockets.
Pretreatment
?
Loading
Check all
pens,
?
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Use
a
a pre-wash product or liquid detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light
and
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can
completely remove oil.
dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, delicate items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
8
U
BeforStaingWsh
Using
se
of Water,
Detergent,
Bleach and Softener
Water
Amount of Water Level
?
?
This machine detects the
will be shown
on
the control
?
The
?
When the water level is
same
panel.
used)
Medium
Small
temperature
The machine sets the
?
You
appropriate temperature automatically according to the wash program
change
by pressing the WATER TEMP. button. (refer to page 12)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning
.
the water temperature
can
results. We recommend temperatures of:
White
HOT 49~60°C...(120-140˚F)
-
-
-
WARM
COLD*
29~40°C...(85-105˚F)
18~24°C...(65-75˚F)
items, diapers, underclothing
and
heavily soiled, colorfast items.
Most items
Only very bright colors with light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
-
-
-
-
*
be
water level is indicated
?
?
(to
Detergent
Ex-Large
Large
automatically detected, it may differ depending on the quantity of laundry even
on the control panel.
though
The amount of a cup in the diagram is about 40g for concentrated detergent.
Water
?
ater
sets the water
following table shows the amount of water.
the
?
quantity of laundry automatically, then
level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing
the
right detergent
We recommend the
use
of domestic
detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use detergent suitable for washing woolens.
9
BeforStaingWsh
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
liquid and concentrated detergents,
follow the recommendations of the
(Jeans
detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes
water. Lots of foam may look
foam
means
not
or
machine.
the
washing
detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
If excess
Attention
Adding the detergent
Open the detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of detergent
()
where you deposit the detergent
Powder Detergent dispenser.
Where you
Some detergents MUST be fully dissolved before
deposit the
adding to your machine to get the best wash results. detergent
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Attention
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
10
U
BeforStaingWsh
se
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Using
?
?
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil
stains.
Softener
dispenser (
)
Measure and add the recommended amount of fabric softener
into the compartment marked with this
Follow manufacturer's direction.
).
symbol(
or
F
Fabric softener is automatically
with indication beep.
F
If you want extra rinse, you must add fabric softener
manually when indication beep rings in the final rinse.
This maximize the fabric softener function.
?
dispensed
Do not overfill. The dispenser hold
Never add more than 35mL.
max
in the final rinse
35mL.
Overfilling can cause early dispensing of the fabric
which could result in stained clothes. A cup with
?
a
softener
pouring spout will help
you avoid
spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with
detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric
Scrud(Waxy
Build
softener
dispenser.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 26)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
When
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
consistency
a warm one.
is less
likely to leave residue on the dispenser and contribute to
a
11
Special
Guide for Stain Removal
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
?
To pretreat
stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
?
Use cold water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
unknown stains because hot water
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
set
stains.
specific fabrics.
inside
Follow fabric care label
instructions
seam.
Stain Removal
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels.
nonflammable dry cleaning fluid.
Use
Saturate with
prewash stain remover or
product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash
using cold water and bleach
safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with
product containing enzymes. Wash using bleach
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
safe for fabric.
BeforStaingWsh
12
F
BeforStaingWsh
Water
unction of each Button
temperature button (option)
Water level button
(indication of detergent amount)
Use to select water temperature.
Pressing the button allows you to select
Cold
Warm
(Hot&Cold)
Cold respectively. Default
?
Hot
adjust the water level as required. The appropriate
detergent is shown next to the water level in
the Water-Detergent diagram
Use to
amount of
setting is Cold.
?
Water level is
automatically selected for fuzzy (normal)
program.
The following
settings are indicated as the button is
Medium
Small
pushed Large
Ex-Large
Large
Water
Hot
Warm
Wash
?
?
option button(option)
Cold
Extra Wash
Extra Rinse
Detergent
Ex-Large
Delay
Large
Gentle
Medium
delayed finishing time.
Use to set
?
The time increases when the button is
?
a
pushed.
following settings are indicated as the button is
...11
12
14
5
16
...46
pushed 3 4
The
48
3 HOUR.
To cancel
delay time,
(refer to page 16)
18)
Note
*
The control
panel may differ according to
button
?
?
(refer
Small
Delay Start (Reservation)
According to kinds of laundry, soiled extent
or washing habit you can select suitable
wash option manually.
By pressing the button wash option is
changed.
to page
Spin
Time
Left
different models
turn
the power switch off.
Ho
M
13
Time
Use to start
?
?
Time left
-
During operation,
the
remaining time is
indicated.
?
Delay Start indication (Reservation) When delay start (reservation)
program is selected, it indicates the finishing time. (RES.=DELAY)
?
Alarm indication -When
-
indicate the
abnormality.
For
occurs,
an error
?
after
open.
Fuzzy
Economy
Speedy Soak
Wash
Rinse
Min.
stopping.
AUTO OFF
(Power) button
AUTO OFF
Hour
pause the
The power goes off
automatically 10 minutes
message appears to
indicates that the lid is
example,
or
washing process.
Repeats start and pause by
pushing the button.
?
an error
BeforStaingWsh
Start/ Pause button
left, Delay Start (Reservation), Alarm indication
?
Use to turn the power
off.
?
Push
again
on or
off
Jean
Wool
Spin
?
on or
and power goes
The power goes off
automatically about 10
seconds after the wash is
finished.
Process button
?
Use to select
Wash, Rinse
Soak,
and
Speedy
Spin functions
Child lock function
Use to lock
or
unlock the control
buttons to prevent
as
desired.
Program
from
settings
being changed by a child.
To lock, push the PROCESS
simultaneously
push them one more time during
the washing process.
(refer to page 18)
:
3 step works at
?
Use for
selecting wash program.
This button allows you to select 4
different programs for different kinds of
laundry
and
PROGRAM buttons
and to unlock
?
?
button
and dirtiness.
program selections light up in sequence
follows: Fuzzy (Normal)
Economy
Jean
Wool
Fuzzy (Normal) etc.
pressing the
Select the desired program by
button.
large and medium water level of Fuzzy
as
and Jean program.
14
Washing Programs
WashingProm
AUTO OFF
Add
the
Washing
Programs
Add
the detergent
laundry
Fuzzy Washing
(Normal Wash)
1
2
4
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
Add the appropriate
quantity of detergent as
indicated by the water
level next to
Water Detergent.
Or follow the detergent
manufacturer's
instructions
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Economy Wash
washing lightly
1
3
Th
se
lau
Th
th
be
w
5
2
Use this mode when
Select the
soiled clothes for a short time. The
highly recommended
Add the appropriate
quantity of detergent as
indicated by the water
level next to Water
Economy
laundry
program on
the Control
amount isunder 2.0kg.
panel.
Detergent.
Or follow the detergent
manufacturer's
instructions
Jean Wash
Use Jean program when
Jeans of different sizes
1
5
2
3
washing
Spread the
jean
evenly in
Select the Jean
program on the
Control panel.
the tub
Wool Wash
1
Use this program for washing delicate
fabrics such
3
lingerie and woolens.
(wash
clothes)
Before washing your woolens check
the care label for the washing
as
only "water washable"
program on
the Control
1
Speedy Soak Wash
heavy clothes
excessively dirty.
Speedy Soak mode can be used
with Fuzzy or Jean program.
4
2
3
6
Speedy Soak
will not work in
Wool &
Use this mode to wash normal
which
woolens use a mild
detergent recommended for washing wool.
panel.
only water washable clothes)
clothes or thick and
Use neutral detergent
appropriate for the
laundry.
When washing
Select the
Wool
instructions.
(wash
5
2
Economy
Program.
are
Th
Keep pressing the
Speedy Soak light is
on and then Wash, Rinse, Spin lights are on simultaneously.
Until the washing process is completed, the Speedy Soak light is
on.
PROCESS button until the
Speedy Soak
Wash
Rinse
Spin
am
us
w
15
Close the lid
3
Caution & Note
Finish
6
5
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied.
4
4
Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.
6
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
With
lightweight bulky loads, water level
can
be set low.
Changes to water temperature (hot/cold) and
are possible during operation.
(refer to page 12)
wash level
7
6
7
6
7
When
4
setting the water level manually, do not
prevent damage to laundry.
with
hot
water may damage the
Washing
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
set to Medium to
contain some water. This is normal.
Speedy Soak Wash cannot be selected for the
5
7
8
Wool Wash program.
If wool wash is selected, Gentle Spin will be set
automatically.
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
WashingProm
16
D
AditonalFucOps
elay Start (Reservation) Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
,
1
Press the POWER button to turn power
on.
AUTO OFF
2
Press the PROGRAM button to select the
washing program.
Select the program for laundry on the Control panel.
This program will not work in Wool Program.
3
Press the DELAY START
delayed washing
(Reservation) button
be completed.
is to
How to set the
to set the time when the
delay time.
Example
you'd like your wash to finish at 9
set
the
time
as
in the figure below.
p.m.
When you push the button the reservation time changes
3E 4E5E...12E 14E 16E...E 48E 3 repeatedly.
:
4
Add the
It's 7
a.m. now.
If
The
detergent.
Delay
Hour
Time
Left
Min.
(RES.=DELAY)
appropriate quantity of detergent marked next to
the
water level of Water?Detergent.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink.
6
an
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Close the lid.
Water will be
Finish
The
wash to
light will
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not
To select
washing program, spinning time,
(RESERVATION)
When the
work, and
laundry
spinning program (The laundry
.
alarm
water level
button and select the desired
cannot be taken out
an
or
option.
signal will
alarm to remind you to close the lid.
manually, press the DELAY START
Then press the START/PAUSE button.
hot/cold
immediately after the wash program ends, it is better to omit the
a long time after spinning.)
will be wrinkled if left for
17
Option Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
manually
1
Press the AUTO OFF
(Power)
button to turn power
on.
AUTO OFF
2
Wash
,
Wash+Rinse
,
Rinse
,
Rinse+Spin
,
Press the PROCESS button until above
(refer to p13)
light is on.
Spin only options
Option Washing
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the Large water
level automatically.
(refer to page 12)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
tub.
and close the lid.
Note
?
is
?
?
a Wash, Wash/Rinse or Rinse only option is selected,
completed.
When
If you do not
specify the water level,
If only Rinse is
then Medium will be
selected, the process will
start from Water
the water will not be drained off after the wash
automatically selected.
Supply.
AditonalFucOps
18
O
AditonalFucOps
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings
from
being changed by a child,
you
can use
the
option.
How to Lock
1
2
Press the POWER button.
AUTO OFF
Turn Power
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
Press both the PROCESS button and the PROGRAM button
according to the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or until the child- lock
function is deactivated manually.
and the remaining time will be displayed
alternately in child-lock mode.
until
"
"
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
Wash
Option (option)
One
or more
options can be selected for Fuzzy and Jean washing program.
changed as follows according to selected wash options.
wash
Wash program is
?
Extra Wash: Gives additional 3 min wash
?
Extra Rinse
:
Gives additional
eg.)
rings
?
Mute
Gentle
Spin
:
one
deep rinse
rinse, you must add fabric softener manually when indication
in the final rinse. This maximize the fabric softener function.
If you want extra
Gives
beep
gentle spin instead of normal spin.
Option
If you want to
use
the
washing machine without alarm signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
19
and
Placing
Please
ensure
Leveling
that transit restraint has been removed before
operating
your machine.
Instal ion
1
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
than 10
cm
more
installation.
At the rear,
more
a
minimum clearance of 10
cm
is
than
2cm
suggested.
more
than
2cm
2
Check that the machine is level
Open the lid
same as
3
and look from above to
see
Top
view of the machine
if it is
shown.
Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg
washing machine is
placed evenly.
until the
the
Adjustable legs
Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed
from the back or front of washing machine and screw it (1pcs)
SETTING SCREW
BACK
FRONT
Anti-Rat Cover
UP
Anti-Rat
Cover
UP
SETTING SCREW
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
20C
Instal ion
onnecting
Supply
Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and
then choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make
sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to
the hot water tap.
Connecting
Water
Normal
1
Water
Supply
Hose to water
Type
(Normal tap without thread &
the
Untighten
tap
screw
type inlet hose.)
Rubber
screw
packing
Untighten the screw of the connector so that the
tap can be placed in the middle.
2
Fixing
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
supply
hose
securely
to the
connector
Push the water
supply hose vertically upwards
that the rubber seal within the hose
can
Connector
so
adhere
completely to the tap.
Water
Supply
4
Fixing
the connector to the water
Attach the water
then
5
tighten
it by
supply
Hose
hose
supply hose to the connector and
screwing it to the right.
Check the connection of water
supply
hose and the connector
After
connecting the hose, open the tap to check
for any water leakage.
If the water leaks, close the tap and start again
from step 1
Attention
The
washing machine is to be connected to the water mains using new hose-sets
not be reused.
and old hose-sets should
21
Normal
1
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
tap is
too
Guide
large.
plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
Rubber
packing
step1.
Fixing Connectors to
the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting
Middle
Connector
Fixed sticker
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
and
then join it to the middle
Step1)
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
22
C
Instal ion
Screw
1
Water
onnecting
Supply
Hose
Type
Attach the water
supply
hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
3
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose, open the tap
for any water leakage.
Connecting
?
Water
Supply
to check
Hose to the machine
supply hose to inlet valve of
washing machine, and then lock it by turning
the hose connecting part.
Connect the water
the
?
Check
to
see
if there is
a
rubber seal inside the
Hose connector
connector.
Rubber seal
Hose
23
Connecting
Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Instal ion
Model
Pump
1
Fit the end of the drain hose to the outlet of the
2
Put the other end of the drain hose over the standpipe or
drain pump and
tighten the clamp.
wash tub.
Hose
Guide
Within 50 mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
Non-Pump
1
Before
Model
connecting
Ensure that the hose
clip
is set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
2.
Repeat Step
To
elbow hose and
guide.
24
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage
possible
a
danger of
electric shock
.
Grounding
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Ground Terminal
country
Outlet with
Other
Grounding
Method
Burying Copper
bury it
terminal.
Plate
Connect the Ground Wire
Plate and
ground
more
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Ground
Using Ground
Wire
Copper
ground Wire to the socket provided
exclusively for Grounding.
Plate
Connect the
Using
a
Short Circuit Breaker
If grounding methods described above
possible,
employed
a
Ground
Wire
are
not
separate circuit breaker should be
and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
Connecting ground to plastic has no effect
?
Ground wires should be connected when
an
extension cord is used.
dangerous during electrical
25
Cleaning
Cold water
?
and Maintenance
washing
If you
always use cold water, we recommend that a warm or hot wash be used
intervals e.g. every 5th wash should be at least a warm one
at
a
regular
When you have finished
?
?
Turn off taps to prevent the chance of flooding should
Always unplug the power cord after use.
When water supply into the tub is not clean
filter in the inlet valve occasionally.
(The figure of power cord and
water
or
the filter is
a
hose burst.
clogged
tap may vary according
with
to the
particles (such
as
sand),
clean the
country)
To Clean the Filter in the Inlet Valve
Close the tap before turning off the power.
Select both hot/cold and then press the
1
2
Turn off the power before
pulling out the cord.
4
Replace the filter after cleaning it.
[START/PAUSE] button to remove water
completely.
from the machine
After removing the water
3
supply
pull out the filter.
hose
Then
use a
brush to clean the filter.
Caution
Before
cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
1
Pull out the lint filter from
2
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
3
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
?
If the lint filter is torn
To Clean the
1
damaged, purchase
a new one
from LG service center.
Pump casing (for pump model)
Unfasten 2
back
or
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin, etc
3
fasten it.
such
(Bottom view)
(Bottom view)
Caution
?
Check if water leaks after
reassembling. (The
Rubber
Reassemble the cap to
the arrow direction and
ring
is in the
cap)
CarendMitc
26
C
CarendMitc
and Maintenance
leaning
When there is a fear of
?
?
?
freezing
Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
and
supply
Wash Inner-tub
drainage of water.
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
use a clean soft cloth dampened with liquid detergent, then rinse. (Do
the inner-tub
not use harsh or
Inlet Hoses
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
Vacations
Be
water
sure
be below
Cleaning the
?
?
supply
freezing.
Add about two cups of
regular cold water washing,
Stop the washer,
After
a
important that you occasionally clean
powdered detergent that contains phosphate.
soaking,
open the lid and leave it to soak
drain the washer and
run
it
Products that
Hydrocarbon
(Be
washer
or
?
Use of
thinners and
or
liquids
can
damage your washer's
the
paintwork and components
etc.
dissolve
can
are
plastic
of your washer.
and blister
paint
flammable DO NOT put them in
control
panel.
in your washer may cause staining of the plastic components. The dye will not damage the machine
suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
dyes
your washer.
Do not
machine
dryer.)
Some pretreatment sprays
we
cycle.
petrol, paint
lacquer thinners,
washing garments stained with these solvents as they
?
but
normal
diaper sanitizer will cause damage to
solvents i.e.
careful when
a
during this procedure.
might damage your washing
Concentrated bleaches and
overnight.
through
We do not recommend that you wash clothes
?
it is very
Let it operate for several minutes.
?
?
is shut off at faucets. Drain all water from hoses if weather will
Fill your washer with hot water.
?
?
surface with
Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
gritty cleaners.)
use
your washer lid
as a
work surface.
27
Common washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
damage. For satisfactory washing results, follow these
scum, and fabric
instructions.
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
Not
?
Wash water
enough detergent
?
?
the washer
?
Overloading
?
Incorrect wash
Use
?
Reduce load size.
?
Wash with Jean
Do not
soil type.
?
?
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
softener
See page 10 for
?
Black or gray
marks on
clothes
Yellow or
brown rust
stains
A
buildup
caused
by
the
?
interaction of fabric
softener and
detergent
can
flake off and mark clothes
?
Not
enough detergent
?
Iron
or
water
or
manganese in
supply,
water
?
dispenser and do not pour
directly onto fabric.
instructions.
more
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
Use correct amount of detergent for load
size,
amount of soil
and water hardness.
?
To restore discolored load of whites,
use
rust
remover
safe
for fabric.
pipes,
water heater
required according to
(refer to page 8)
or Speedy Soak & Jean wash cycle for
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on
Blue Stains
amount of
hot water for normal soil.
pretreat stain
Incorrect
?
?
warm or
Different water temperature may be
cycle
sorting
?
size,
soil and water hardness.
temperature
too low.
Use correct amount of detergent for load
?
Install
nonprecipitating water softener or an
iron filter in
supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
your water
?
Lint
?
?
?
Residue
or
detergent
Incorrect
sorting
pocket
Overloading the washer
?
?
Overloading
?
Undissolved
?
Use too
the washer
detergent
much detergent
or
Incorrect
use
of chlorine
?
?
Unfastened
zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading
Degradation
synthetic fabrics and remove tissues in
sorting and caring
Do not overload the washer
?
Do not overload the washer.
?
?
detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Some
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
threads
?
towels, flannelette sheets, separately
?
bleach.
snags
eg
pockets
before loading.
?
?
givers
before wash. See page 7 for
?
Holes, tears,
Wash lint
from lint collectors eg
Tissues left in
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
the washer
of fabric
?
Do not overload the washer.
See page 7 for
caring before
Troubleshting
28
T roubleshooting
Troubleshting
Before
calling for service,
Symptom
Water Supply
Failure
check the
Error
problem against
Message
Check up
.
.
.
.
.
.
Drainage
Failure
the list bellows.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
or
water
supply hose frozen
Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
Is the Hot hose connected to cold?
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
(only pump model) clogged
.
Spin
Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
?
or
with
drain pump
impurities?
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on a flat surface?
.
Is the lid closed?
.
Please call your nearest LG Electronics service center
for help.
29
erms
TWhat
of
Warranty
Is Not Covered:
?
?
?
?
trips to your home to teach you how to use the product.
If the product is connected to any voltage other than that shown on the rating plate.
If the fault is caused by accident, neglect, misuse or Act of God.
If the fault is caused by factors other than normal domestic use or use in
Service
accordance with the owner's manual.
change the set-up of the product.
If the fault is caused by pests for example, rats or cockroaches etc..
Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
Correcting the installation for example, levelling the product, adjustment of drain.
Normal maintenance which recommended by the owner's manual.
Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
Replace fuses in or correct house wiring or correct house plumbing.
Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible defects
with this appliance.
If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
?
Provide instruction
on use
of product
or
?
?
?
?
?
?
?
?
?
If the
product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
TermsofWanty
30
Specification
Specifaton
H
D
W
WF-T(S,C)550(~2)0(~5)P(P,H,C)
Model
WF-T(S,C)650(~2)0(~5)T(P,H,C)
WF-T(S,C)750(~2)0(~5)T(P,H,C)
WF-T(S,C)750(~1)0(~9)P(P,H,C)
WF-T708TC, WF-T868TC(H)
WF-T(S,C)850(~1)0(~9)T(P,H,C),
540(W)
Size
x
540(D)
x
850(H) WF-T(S,C)5500(~5),T(S,C)6500(~5)
WF-T(S,C)5520(~5),T(S,C)6520(~5)
WF-T(S,C)7500(~5),T(S,C)7520(~5)
540(W) x540(D)
x
910(H)
WF-T(S,C)5510(~5),T(S,C)6510(~5)
WF-T(S,C)7510(~5),T708
Water tab pressure
In
to
590(W)
x
606(D)
x
590(W)
x
606(D)
x
30
-
800 kPa (0.3
-
928(H) WF-T(S,C)7500(~9),T(S,C)8500(~9)
958(H) WF-T(S,C)7510(~9),T(S,C)8510(~9),T868TC(H)
8.0
kgf/cm2)
continuing effort to improve the quality of our appliances,
the appliance without revising this manual.
our
it may be necessary to make
changes
P/No.: 3828EA3012X
Download PDF