LG | WF-T8619TC | LG WF-T8619TC Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T(S,C,F)560(~2)0(~5)PC
WF-T(S,C,F)660(~2)0(~5)TC
WF-T68PC, WF-7020TC
WF-T(S,C,F)7608~9PC
WF-T(S,C,F)8618~9TC
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open
rinse or spin cycles, the operation stops for safety.
during
the
wash,
Fuzzy logic control
A built-in load
automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal water level
and washing time.
sensor
SENSING
START
Laundry
SETTING
WASHING
Optimum
Washing
Sensor
Water Level Sensor
Condition
Advanced
ensures
technology is built into
washing result.
AUTO
POWER
OFF
the Electronic Control System which
the best
Turbo drum
When "Punch
washing (option)
turn, the washing
tub turns in the opposite direction. This makes the
both sides current of water which improve wash+
3"
washing wings
performance by rubbing
Applied
3 Step
3 step
models
:
clothes
strongly.
WF-T
washing
washing
Rubbing
makes the best
washing performance with
Rubbing and
Shaking
low
tangling.
Shaking and
Disentangling
C
ontents
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
Before
Starting
to Wash
Safety Information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
Special
Washing Programs
Additional Function
Options
Installation
Care and Maintenance
Troubleshooting
Terms of
Warranty
Specification
Detergent, Bleach and Softener
Guide for Stain Removal
8
11
Function of each Button
12
Fuzzy Wash (Normal Wash)
14
Jean Wash
14
Wool Wash
14
Speedy Soak Wash
14
Economy Wash
14
Delay
Start (Reservation) Wash
16
Option Washing
17
Other useful Functions
18
Placing
and
Leveling
Supply
Connecting
Water
Connecting
Drain Hose
19
Hose
Grounding Method
20
23
24
Cleaning
and Maintenance
25
Common
washing problems
27
Troubleshooting
28
Terms of
29
Warranty
Specification
30
4
S
Introducin
afety
information
WARNING!
Read and follow this safety information carefully.
For your safety, the information in this manual must be followed to minimize the risk of fire
shock, or to prevent property damage, personal injury, or loss of life.
Save these instructions.
?
WATER HEATER
or
explosion, electric
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more.
Hydrogen gas can be explosive under these circumstances. If the
hot water has not been used for two weeks or more, prevent the possibility of damage or injury
SAFETY
by turning on all hot water faucets and allowing them to run for several minutes. Do this before
using any electrical appliance which is connected to the hot water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
smoke or use an open flame or appliance during this process.
PROPER
?
INSTALLATION
The base
opening must not be obstructed by carpeting when the washing machine is installed on
carpeted floor.
Install or store where it will not be exposed to temperatures below freezing or exposed to the
a
?
weather.
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
?
YOUR
?
LAUNDRY
AREA
?
Must be positioned so that the plug is accessible.
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this
to
WHEN USING
THE WASHER
?
?
?
?
?
play
on,
appliance is used by or near children. Do not allow children
with, or inside this or any other appliance.
Use this
appliance only for its intended purpose as described in this Owner's Manual.
Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric
shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before
NOTE:
Pressing
attempting any maintenance or cleaning.
Power button to turn off does NOT disconnect the appliance
from the power supply.
?
WHEN NOT IN
?
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or
USE
?
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before
discarding a washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
Do not attempt to repair or replace any part of this
appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
?
skills to carry out.
Do not tamper with controls.
5
I
dentification of Parts
Introducin
Body
POWDER DETERGENT
BOX FOR DELAYED
*
WASHING
HOSE
()
*
WATER SUPPLY
Make
sure
the water
does not leak.
SOFTENER INLET
Softner will
automatically
flow into the tub.
*
()
POWER PLUG
If the
supply cord is
damaged, it must be
replaced by the
INLET HOLE FOR
BLEACH
manufacturer
()
TUB
or
its service agents
or
similarly qualified
person in order to
avoid a hazard.
FUNCTION
SELECTOR
LINT FILTER
Clean
regularly to stop
linting on the clothes
load.
START/PAUSE
*
BUTTON
stop the
machine
Use to start
or
DRAIN HOSE
for pump model
Check if the drain hose
washing
temporarily.
hung up before
operating the
washing machine.
is
*
DRAIN HOSE
for non pump model
ADJUSTABLE LEGS
Use to level the
washing
machine for correct balance
&
BASE
spin operation.
Accessories
Water
supply
hoses
Drain hose
Anti-rat
cover
or
or
1 Each for cold and
hot water
Note
Part
can
be different
according to
the model.
or
(option)
6
Function
Information
Our machine
provides
various
washing methods which
suits various conditions and
types of laundry.
Introducin
Different
types of laundry washing
Fuzzy(Normal)
Use this
Wash
Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page14)
Jean Wash
Use this
Program for heavily soiled durable garments e.g. overalls, jeans.
heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
to
(refer page14)
Thick and
Wool Wash
Delicate clothes
(lingerie, wool, etc.)
which may be
The fibers of machine washable woolens have been
easily damaged can be washed.
(refer to page14)
specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
?
?
?
?
When
washing woolens use a mild detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
tumble action of a
(The heat and
of woolen
dryer may
shrinkage felting
garments.)
underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
cause
or
Some wool
Washing according
to the condition of
laundry
Economy Wash
Economy wash can be selected to wash lightly soiled clothes
(refer to page14)
of less than 2.0
kg in a
short time.
Speedy Soak Wash
Speedy Soak Wash is designed to maximize washing performance and can be selected to wash heavily
soiled laundry with Fuzzy or Jean Program.
(refer to page14)
Other
washing
Delay
method
start
Wash
Delay start Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly.
(refer to page16)
Option Wash
When the
user needs only Spin, Rinse/Spin, Rinse, Wash/Rinse, Wash, Wash/Rinse/Spin,
Speedy Soak/Wash/Rinse/Spin. (refer to page17)
7
Preparation
Before
Washing
BeforStaingWsh
Care Labels
*
Look for a
care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
results, different fabrics need to be washed in different ways.
To get the best
?
?
?
(Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
Lights, Darks) Separate white fabrics from colored fabrics.
LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
SOIL
COLOR (Whites,
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
Check all
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
pens,
?
?
?
?
?
?
coins,
Pretreat any dirt and stains.
Make sure the clothes are washable in water.
washing instructions.
Remove tissue in pockets.
on
stains
or
heavy soil
Pretreat shirt collars and cuffs with
Before
?
WIRE
Check the
Pretreatment
?
Loading
Use
a
a pre-wash product or liquid detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light
and
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can
completely remove oil.
Do not dry anything that has ever had any
of oil on it (including cooking oils).
type
result in death,
fire.
Doing so can
explosion,
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, delicate items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
or
8
U
BeforStaingWsh
Using
se
of Water,
Detergent,
Bleach and Softener
Water
Amount of Water Level
?
?
This machine detects the
will be shown
on
the control
of laundry
automatically, then
sets the water
(to
be
used)
panel.
following table shows the amount of water.
?
The
?
When the water level is
automatically detected, it may differ depending on the quantity
is indicated on the control panel.
though
The amount of a cup in the diagram is about 40g for concentrated detergent.
the
?
quantity
level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
same
of laundry
even
water level
Water temperature
?
The machine sets the
?
You
?
appropriate temperature automatically according to the wash program
change
by pressing the WATER TEMP. button. (refer to page 12)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning
can
.
the water temperature
results. We recommend temperatures of:
HOT 49~60°C...(120-140˚F)
White
-
-
-
?
items, diapers, underclothing
and
heavily soiled, colorfast items.
Most items
Only very bright colors with light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
-
-
-
-
*
WARM 29~40°C...(85-105˚F)
COLD* 18~24°C...(65-75˚F)
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing the right detergent
We recommend the
use
of domestic
detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use detergent suitable for washing woolens.
9
BeforStaingWsh
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
liquid and concentrated detergents,
follow the recommendations of the
(Jeans
detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
water. Lots of foam may look
foam
means
not
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes
or
machine.
the
washing
detergent is used, the rinse will not be as clean and efficient. Also,
environmental pollution, so use it accordingly.
If excess
it could
cause
Attention
Adding the detergent
Open the detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of detergent
()
where you deposit the detergent
Powder Detergent dispenser.
Where you
Some detergents MUST be fully dissolved before
deposit the
adding to your machine to get the best wash results. detergent
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Attention
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
10
U
BeforStaingWsh
se
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Using
?
?
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil
stains.
Softener
dispenser (
)
Measure and add the recommended amount of fabric softener
into the compartment marked with this
Follow manufacturer's direction.
symbol(
).
or
H
Fabric softener is automatically
with indication beep.
H
If you want extra rinse, you must add fabric softener
manually when indication beep rings in the final rinse.
This maximize the fabric softener function.
?
dispensed
Do not overfill. The dispenser hold
Never add more than 35mL.
max
in the final rinse
35mL.
of the fabric softener
which could result in stained clothes. A cup with a pouring spout will
Overfilling can cause early dispensing
?
help
you avoid
spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with
detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric
Scrud(Waxy
Build
softener
dispenser.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 26)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
When
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
consistency
a warm one.
is less
likely to leave residue
on
the
dispenser and contribute to
a
11
Special
Guide for Stain Removal
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
To pretreat
stains, use a prewash product, liquid detergent,
granular detergent and water.
?
unknown stains because hot water
?
Use cold water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
or a
set
paste made from
stains.
specific fabrics.
inside
Follow fabric
care
label
instructions
seam.
Stain Removal
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
TREATMENT
Apply ice. Scrape off excess. Place stain face down
nonflammable dry cleaning fluid.
Use
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with product
containing enzymes. Wash using bleach
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
soak in warm water using
Pretreat
Pretreat with prewash stain remover
Dye transfer on white fabric
Use
Grass
Pretreat
motor oils)
or
packaged
or
product containing enzymes. Wash using bleach safe for fabric.
or
rub with bar soap.
color remover. Wash using bleach safe for fabric.
soak in warm water using
product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set
alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat
Mud
Mustard,
tomato
or
product containing enzymes to pretreat or soak stains.
Collar or cuff soil, cosmetics
Grease, oil,
fats, salad
dressing, cooking oils, car grease,
paper towels. Saturate with prewash stain remover
Pretreat stain. Wash using cold water and bleach safe for fabric.
Chocolate
tar (butter,
on
or
soak with product
some
inks. Use
prewash stain remover, denatured
washing. Badly
containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
Rust, brown or yellow
discoloration
Shoe polish
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
detergent and
: Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
LIQUID
safe for fabric.
BeforStaingWsh
12
F
BeforStaingWsh
unction of each Button
Delay Start (Reservation)
?
?
button
delayed finishing time.
The time changes 6 E 9 E 15(6+9)
6hr when the button is pushed.
To Delay Start, push both the
Use to set
(indication of detergent amount)
a
E
PROGRAM, and START/PAUSE
buttons
Water level button
simultaneously.
(refer to page 16)
?
adjust the water level as required. The appropriate
of detergent is shown next to the water level in
the Water-Detergent diagram
Water level is automatically selected for fuzzy (normal)
and jean programs.
The following settings are indicated as the button is
pushed Large E Ex-Large E Small E Medium E
Large
Use to
amount
?
Child lock function
Process button
?
Use to select
and
Spin
Speedy Soak, Wash, Rinse
functions
as
desired.
Use to lock
or
unlock the control buttons to
prevent setting from being changed by a child.
To lock, push both the PROCESS, and
PROGRAM buttons
push
them
one more
process.
(refer to page 18)
Note
The control
panel may differ according to
different models
simultaneously and to unlock
during the washing
time
13
Program
?
?
Use for
AUTO OFF
selecting wash program.
This button allows you to select 4
different programs for different kinds of
laundry
?
button
and dirtiness.
?
?
?
(Power) button
Use to turn the power on or off.
again and power goes on or off
Push
The power goes off automatically about
10 seconds after the wash is finished.
program selections
light up in sequence as
Fuzzy (Normal) E
Economy
E Jean E Wool E Fuzzy (Normal) etc.
Select the desired program by pressing the
follows:
button.
Start/Pause button
?
?
?
Use to start
pause the
washing process.
by pushing the button.
The power goes off automatically 10 minutes after stopping.
This appliance is fitted with a safety function that automatically stops the
operation of the washing machine when it is exposed to heavy disturbance on
Repeats
or
start and pause
the mains.
:
3 step works at
large
and medium water level of
Fuzzy
and Jean program.
BeforStaingWsh
14
Washing Programs
WashingProm
Add
the
Washing
Programs
Add
the
laundry
Fuzzy Washing
1
(Normal Wash)
Used for normal loads, this mode
detergent
2
4
automatically selects the most
Add the appropriate
quantity of detergent as
indicated by the water
level next to
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Th
se
Water Detergent.
Or follow the detergent
lau
Th
th
be
manufacturer's
w
instructions
Economy Wash
washing lightly
1
3
5
2
Use this mode when
Select the
soiled clothes for a short time. The
highly
amount is under
Add the appropriate
quantity of detergent as
indicated by the water
level next to Water
Economy
recommended
laundry
2.0kg.
on
program
the Control
panel.
Detergent.
Or follow the detergent
manufacturer's
instructions
Jean Wash
Use Jean program when
Jeans of different sizes
1
Spread the
jean
evenly in
the tub
Wool Wash
1
Use this program for washing delicate
fabrics such
(wash
as
5
2
3
washing
Select the Jean
program on the
Control panel.
3
5
2
lingerie and woolens.
Use neutral
only "water washable" clothes)
Before washing your woolens check
the care label for the washing
program
instructions.
the Control
(wash
only water washable
1
4
which
thick and
will not work in
Wool &
heavy clothes
excessively dirty.
Speedy Soak mode can be used
with Fuzzy or Jean program.
6
Speedy Soak
Use this mode to wash normal
or
3
2
Speedy Soak Wash
clothes
laundry.
When washing
woolens use a mild
detergent recommended for washing wool.
on
panel.
clothes)
detergent
appropriate for the
Select the
Wool
Economy
are
Program.
Th
Keep pressing the PROCESS button until the Speedy Soak light
on and then Wash, Rinse, Spin lights are on simultaneously.
is
am
Until the
Speedy Soak
Wash
is
Rinse
w
on.
washing
process is
completed,
the
Speedy
Soak
light
Spin
us
15
Close the lid
3
Finish
Caution & Note
6
5
If water is already in the tub,
or
putting wet
laundry into the tub before starting will
increase the water level.
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied.
4
4
4
Water will be
supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.
6
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
With
lightweight bulky loads, water level can
be set low.
Changes to water temperature (hot/cold) and
wash level are possible during operation.
(refer to page 12)
7
6
7
6
7
When setting the water level manually, do not
set to Medium to prevent damage to laundry.
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
contain
some
water.
This is normal.
Speedy Soak Wash cannot be selected for the
5
7
8
Wool Wash program.
If wool wash is selected, Gentle Spin will be set
automatically.
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
WashingProm
16
D
AditonalFucOps
elay Start (Reservation) Wash
Delay
Start (Reservation) Wash is used to
The hours to be
The time on the
delay the finishing time
delayed can be set by the user accordingly.
display is the finishing time not the start time.
,
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the
?
3
of the operation.
on.
washing
program.
Select the program for laundry on the Control
This method will not work in Wool Program.
panel.
Press the DELAY START button.
?
The time
6E
changes as following order
15(6+9)E6Hours.
9E
(RES.=DELAY)
4
Add the
detergent.
?
Add the
laundry
the
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
an
and press the START/PAUSE button.
?
6
appropriate quantity of detergent marked next to
of Water?Detergent.
water level
?
5
The
?
Close the lid.
When you press the START/PAUSE button the
blink.
Water will be
wash to
Finish
light will
The
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not work, and
an
To select
hot/cold manually, press the DELAY START
option. Then press the START/PAUSE button.
washing program, spinning time,
(RESERVATION)
alarm
water level
button and select the desired
signal will
alarm to remind you to close the lid.
or
laundry cannot be taken out immediately after the wash program ends, it is better to
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
omit the
17
Option Washing
When you only need the Wash,
be set manually as follows.
1
Wash/Rinse, Rinse, Rinse/Spin
Press the AUTO OFF (Power) button to turn power
2
Wash
Wash+Rinse
,
,
Rinse
Rinse+Spin
,
,
Press the PROCESS button until above
light is on. (refer to page 13)
When you want to
washing tub drains
or
Spin cycle, this
can
AditonalFucOps
on.
Spin only options
Option Washing
only drain, wait until the water in
completely and then, turn off the
the
power.
3
Press the WATER LEVEL
level
of
laundry.
automatically.
amount
button,
control the
water
anything,
level
according
it is set the
Large
to
the
water
(refer to page 12)
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
to
If you do not choose
into the
washing tub.
detergent and close the lid.
Note
?
When
a
drained
Wash, Wash/Rinse
completely.
?
?
Rinse only
option is selected,
after the wash is
completed the water will not be
press the SPIN button and wait until the water in the tub has drained
Then press the START/PAUSE button
If you do not
If
or
off, If you wish to drain the water,
.
specify
the water level, then Medium will be
only Rinse is selected,
the process will start from Water
automatically selected.
Supply.
18
O
AditonalFucOps
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings
from
being changed by a child,
you
can use
the
option.
How to Lock
1
Press the POWER button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
Press both the PROCESS button and the PROGRAM button
according to the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or it is child- lock
function is deactivated manually.
until
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
Note
In child-Lock
Mute
mode, all Program light will blink.
Option
If you want to
use
the
washing machine
without alarm
signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously
one more
19
and
Placing
Please
ensure
Leveling
that transit restraint has been removed before
operating
your machine.
Instal ion
1
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
than 10
cm
more
installation.
At the rear,
more
a
minimum clearance of 10
cm
is
suggested.
than
2cm
more
than
2cm
2
Check that the machine is level
Open the lid
same as
3
and look from above to
see
Top
view of the machine
if it is
shown.
Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg
washing machine is
placed evenly.
until the
the
Adjustable legs
Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly
fixed from the back or front of washing machine and screw it (1pcs)
SETTING SCREW
BACK
Anti-Rat Cover
UP
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
20C
Instal ion
onnecting
Water
Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and
then choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make
sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to
the hot water tap.
Connecting
Water
Supply
Hose to water
Normal Type
1
Supply
tap
(Normal tap without thread &
Untighten the
screw
type inlet hose.)
Rubber
screw
packing
Untighten the screw of the connector so that the
tap can be placed in the middle.
2
Fixing the
connector to
screw
Connector
the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
supply
hose
securely
to
the
connector
Push the water
supply hose vertically upwards
that the rubber seal within the hose
can
Connector
so
adhere
completely to the tap.
Water
Supply
4
Fixing the
connector to
Attach the water
then
5
tighten
it by
the water
supply
Hose
hose
supply hose to the connector and
screwing it to the right.
Check the connection of water
supply
hose and the connector
After
connecting the hose, open the tap to check
for any water leakage.
If the water leaks, close the tap and start again
from step 1
Attention
The
washing machine is to be connected to the water mains using new hose-sets
not be
reused.
and old hose-sets should
21
Normal Type
1
(Normal tap without thread & one touch type inlet hose.)
Separate Middle
connector
from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
tap is
too
Guide
large.
plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
Fixing
Rubber
packing
step1.
Connectors to the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper
Connector and Middle Connector
Remove the fixed sticker in between the
and Middle Connectors.
by holding
one
5
Tighten the connectors
connector and
connector to the
Connector
Upper
twist middle
Middle
Connector
Fixed sticker
right.
Connecting Middle
Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
and
then join it to the middle
Step1)
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may
If you
occur.
Supply
Hose
Pressing
handle
Instal ion
22
C
Instal ion
Screw
1
Water
onnecting
Supply
Hose
Type
Attach the water
supply
hose to the tap.
Push the water
supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
3
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose,
for any water leakage.
Connecting
?
Water
open the tap to check
Supply
Hose to the machine
water supply hose to inlet valve of
washing machine, and then lock it by turning
the hose connecting part.
Connect the
the
?
Check
to
see
if there is
a
rubber seal inside the
Hose connector
connector.
Rubber seal
Hose
23
Connecting
Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Instal ion
Pump Model
1
Fit the end of the drain hose to the outlet of the
2
Put the other end of the drain hose
drain pump and
tighten the clamp.
over
the standpipe or
wash tub.
Hose
Guide
Within 50 mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
Non-Pump Model
1
Before connecting
Ensure that the hose
clip
is set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull
change the direction.
2.
Repeat Step
To
elbow hose and
out the
guide.
24
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage
possible
a
danger of electric shock
.
Grounding
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Other
Ground Terminal
country
Grounding
Outlet with
Method
ground
terminal.
Burying Copper Plate
Connect the Ground Wire
bury it
Plate and
more
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Ground
Using Ground Wire
Copper
ground Wire to the socket provided
exclusively for Grounding.
Plate
Connect the
Using
a
Short Circuit Breaker
If grounding methods described above
possible,
employed
a
Ground
Wire
are
not
separate circuit breaker should be
and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
?
Connecting ground to plastic has no effect
Ground wires should be connected when
an
extension cord is used.
dangerous during electrical
25
Cleaning
and Maintenance
Cold water washing
?
If you
always use cold water, we recommend that a warm or hot wash be used
intervals e.g. every 5th wash should be at least
at
a
regular
a warm one
When you have finished
?
?
Turn off taps to prevent the chance of flooding should
Always unplug the power cord after use.
When water supply into the tub is not clean
filter in the inlet valve occasionally.
(The figure of power cord and
water
or
the filter is
a
hose burst.
clogged
with
to the
tap may vary according
particles (such
as
sand),
clean the
country)
To Clean the Filter in the Inlet Valve
Close the tap before turning off the power.
Select both hot/cold and then press the
1
2
Turn off the power before
pulling out the cord.
4
Replace the filter after cleaning it.
[START/PAUSE] button to remove water
completely.
from the machine
After removing the water
3
hose
pull
Then
out the
use a
supply
filter.
brush to clean the filter.
Caution
Before
cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
Pull out the lint filter from
1
the tub in the direction
2
Turn the net inside out to
clean the filter and rinse it
3
with water.
shown below.
Replace- the filter to the
original location. Push the lip
of the filter until
a
pop sound
is heard.
Note
?
If the lint filter is torn
To Clean the
1
damaged, purchase
a new one
from LG service center.
Pump casing (for pump model)
Unfasten 2
back
or
screws
cover.
of the
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin, etc
3
fasten it.
such
(Bottom view)
(Bottom view)
Caution
?
Check if water leaks after reassembling. (The Rubber
ring
Reassemble the cap to
the arrow direction and
is in the
cap)
CarendMitc
26
C
CarendMitc
and Maintenance
leaning
When there is
a
fear of
freezing
?
Close the
?
Remove the water which remains in the water
?
Lower the drain hose and drain the water in the bowl and the drain hose
water
taps and
remove
the Water
Supply Hose.
supply.
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
and
supply
Wash Inner-tub
drainage of water.
Leave the lid open after
inner-tub
or
Inlet Hoses
washing to allow moisture to evaporate. If you want to
dampened with liquid detergent, then rinse. (Do not
clean soft cloth
clean the
use
harsh
gritty cleaners.)
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not
objects.
Hoses
Exterior
Long
use a
Vacations
Be
sure
water
supply
to
hit surface with
sharp
is shut off at faucets. Drain all water from hoses if weather will be below
freezing.
Cleaning the
Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
?
?
?
?
regular cold water washing,
Add about two cups of
a
powdered detergent that contains phosphate.
Let it operate for several minutes.
Stop the washer,
After
soaking,
Products that
?
open the lid and leave it to soak
drain the washer and
Hydrocarbon
washer
?
might damage
Concentrated bleaches and
(Be careful
?
run
or
Use of
we
your
it
when
a
normal
cycle.
during this procedure.
washing machine
thinners and
the
paintwork and components
petrol, paint
lacquer thinners,
washing garments stained with these solvents as they
etc.
dissolve
can
are
plastic
of your washer.
and blister
paint
flammable DO NOT put them in
dryer.)
or
liquids
can
damage your washer's
control
panel.
in your washer may cause staining of the plastic components. The dye will not damage the machine
suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
dyes
your washer.
Do not
overnight.
through
diaper sanitizer will cause damage to
solvents i.e.
Some pretreatment sprays
but
?
important that you occasionally clean
Fill your washer with hot water.
We do not recommend that you wash clothes
?
it is very
use
your washer lid
as a
work surface.
27
Common washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
scum, and fabric damage. For satisfactory washing results, follow these
instructions.
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
Not
?
Wash water
enough detergent
?
?
?
?
Overloading
the washer
cycle
sorting
?
pretreat stain
?
Incorrect
?
Do not
Use
soil type.
?
?
Blue Stains
Undiluted fabric softener
dispensed directly
onto
amount of
hot water for normal soil.
?
?
fabric
required according to
(refer to page 8)
Reduce load size.
Wash with Jean or Speedy Soak & Jean wash cycle for
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on
?
warm or
Different water temperature may be
Incorrect wash
?
size,
soil and water hardness.
temperature
too low.
Use correct amount of detergent for load
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
softener
dispenser and do not pour
directly onto fabric.
See page 10 for more instructions.
?
Black or gray
marks on
clothes
Yellow or
brown rust
A
buildup
caused
by
the
?
interaction of fabric
softener and
detergent
?
Not
enough detergent
?
Iron
or
water
stains
or
manganese in
supply,
water
?
Use correct amount of detergent for load
?
To restore discolored load of whites,
?
?
?
Residue
or
detergent
?
Incorrect
sorting
pocket
Overloading the washer
?
Install
Overloading
Undissolved
?
Use too
the washer
detergent
much detergent
Before
?
Wash lint
?
snags
?
?
Incorrect use of chlorine
bleach.
Unfastened zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading
Degradation
givers
eg
to clear lines.
towels, flannelette sheets, separately
synthetic fabrics and remove tissues in
sorting and caring
?
Do not overload the washer
?
Do not overload the washer.
?
Some
?
detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
the washer
of fabric
iron filter in
washing, run water for a few minutes
pockets
before loading.
threads
?
rust remover safe
before wash. See page 7 for
?
Holes, tears,
amount of soil
supply system for an ongoing problem.
from lint collectors eg
?
or
use
nonprecipitating water softener or an
?
Tissues left in
?
size,
for fabric.
your water
Lint
against Scrud(waxy buildup).
and water hardness.
pipes,
water heater
the recommendations
(refer to scrud page10.)
can
flake off and mark clothes
Keep
?
Do not overload the washer.
See page 7 for
caring before
Troubleshting
28
T roubleshooting
Before
Troubleshting
calling
for service check the
Symptom
Water
Supply Failure
Error
problem against the list below.
Message
Check up
.
.
.
.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
or
water
supply hose frozen ?
Is the water pressure low or is the filter of the inlet
clogged with impurities?
valve
.
Is Hot/Cold selected to Hot when the hose connected
is Cold?
.
Drainage Failure
Spin Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
.
Check if electric power has gone off.
positioned correctly?
or placed too high?
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on a flat surface?
.
Is the lid closed?
.
Ask for
help
at the
LG Electronic branch
of the Service Center
29
erms
TWhat
of
Warranty
Is Not Covered:
?
?
?
?
trips to your home to teach you how to use the product.
If the product is connected to any voltage other than that shown on the rating plate.
If the fault is caused by accident, neglect, misuse or Act of God.
If the fault is caused by factors other than normal domestic use or use in
Service
accordance with the owner's manual.
change the set-up of the product.
If the fault is caused by pests for example, rats or cockroaches etc..
Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
Correcting the installation for example, levelling the product, adjustment of drain.
Normal maintenance which recommended by the owner's manual.
Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
Replace fuses in or correct house wiring or correct house plumbing.
Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible defects
with this appliance.
If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
?
Provide instruction
on use
of product
or
?
?
?
?
?
?
?
?
?
If the
product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
TermsofWanty
30
Specification
Specifaton
H
D
W
Model
WF-T(S,C,F)7608~9PC,T(S,C,F)8618~9TC
WF-T68PC
WF-T(S,C,F)560(~2)0(~5)PC,
WF-7020TC
WF-T(S,C,F)660(~2)0(~5)TC,
Size
590(W)x606(D)x958(H)
WF-T(S,C,F)8618~9TC
590(W)x606(D)x928(H)
WF-T(S,C,F)7608~9PC
540(W)x540(D)x850(H)
WF-T(S,C,F)5600(~5)
WF-T(S,C,F)5620(~5)
WF-T(S,C,F)6620(~5),WF-7020TC
540(W)x540(D)x910(H)
WF-T(S,C,F)5610(~5),WF-T68PC
WF-T(S,C,F)6610(~5)
Water tab pressure
30 -800 kPa (0.3 -8
kgf /cm2)
our continuing effort to improve the quality of our appliances,
changes to the appliance without revising this manual.
In
it may be necessary to make
P/No.: 3828EA3015N
Download PDF

advertising