LG | WF-S5211PC | LG WF-S5211PC Owner’s Manual

Machine
Washing
OWNER'S MANUAL
MODELS
:
WF-S5201(5)PH(C)
WF-S5211(5)PH(C)
WF-S6201(5)TH(C)
WF-S6211(5)TH(C)
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
and quote this
information to your dealer when you require service.
P/No.: 3828EA3003F
on
the back
cover
Contents
Product Features
SENSING
START
SETTING
Laundry Sensor
Water Level Sensor
Optimum
Washing
Condition
WASHING
AUTO
POWER
OFF
FUZZY LOGIC CONTROL
A load
micro processor in the controller detect
load and set optimum washing conditions such as
sensor
laundry
water
Basic
&
a
level, wash time
etc.
The most advanced
provides
the best
PUNCH
+
technology in electronic
washing performance.
control
understanding
of washing
machine
system
3
How to
Three small
and
pulsators generate strong
sharp
currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction of
washing punch reduces laundry entanglement and
improves washing performance.
water
use
washing
machine
the
Special
Attention for
Name of Each Part
7
Function of Each Button
8
Care Before
10
12
Economy Washing
14
Soak
Washing
16
Wool
Washing
18
Other
15
HOUR96
prevent wrinkle while you
are
now
to
away.
20
Washing
22
Washings
Water Level and Amount of
(DELAY START)
Reserve the time when wash program ends from
Washing
Fuzzy Washing
Reservation
RESERVATION
4
Safety
Detergent
24
How to Use the Bleach & the Softener
25
Child Lock function
26
RESERHow to install
VATION
and maintain
Installing
the Washer
Maintaining
27
the Washer
32
Troubleshooting Guide
34
Specifications
39
EMBOSSING WASHING BOWL
The
embossing wall of the TUB, together with rhythmic wave
improve washing power by beating and rubbing laundry.
2P/No.3828EA3003F
3
P/No.3828EA3003F
Special
Attention for
Safety
Following signs of special attention for safety are to prevent from unexpected
danger of damages by using the washing machine properly and safely.
It is classified into "caution" and "attention".
This
signs
are
for
possible
situation of
follow the direction to avoid any
Caution
:
There
signs
Attention
:
There
might
They
have
be
dangerous
damages.
possible
meanings
items and
of
Caution
Do not operate it when the plug is loose
can cause electric shock or fire.
following.
operation.
circumstances for serious
Do not
Please read
injury of
damaged
plug
even
replace
fuse
by yourself.
Please open the windows to let fresh air in when
gas leak.
Spark can cause fire, explosion or burn.
a
carefully and
death, when this
violated.
are
might
be
possible
circumstances for
light injury
or
damages
of the
product.
Do not put your hands
stops completely.
You can get injured
is
caught
during
in
use or
before it
Do not
place
in wet
places
or
exposed places
for
SpecialAtnofry
rain & wind.
as
hands
Electric shock, fire, machine trouble and
transformation can be caused.
in the clothes.
Caution
Please
ground it or connect to circuit breaker before
inserting power plug into outlet.
If it is not grounded, machine troubles of electric shock
can
be occurred in
Please ask for
repairing when spin doesn't stop
15 seconds after opening the washing machine
causes injury.
within
lid. It
case
Do not
place
it
near
electric heaters, candles,
or
firearms.
of short circuit
Transformation of
melting
can
Do not
sprinkle
water to the
body of washing
machine.
plastic
caused fire
& cord
Electric shock & fire
can
be caused.
or
electric shock.
Please pay attention to children not to climb up
get into the product.
Possible to get
injured by falling
Be careful not to fall into
or
washing
to
Do not put your foot of hands under washing machine.
Spin part is underneath of the product can cause injury.
spin part.
machine when you
Do not operate near places where there are ignitability,
benzene and flammable gas leak or do not
gasoline
use
prop.
Possible to get
or
injured
or
fall down.
wash any flammable strained
clothes. It can causes
explosion
4P/No.3828EA3003F
of fire.
Do not put any magnetic
washing machine.
Fallacy of operation can
cause injury.
Do not
use on
stuff
on
the top of the
outlet for many machineries.
can cause fire.
Over usage of outlet
Do not
disjoint of rebuild except technicians.
Fire, electric shock
can
be
cause.
Do not
damage the power cord by placing heavy
it or covering.
cord is damaged it can
things
If the
cause
on
fire
or
electric shock.
5
P/No.3828EA3003F
Attention for
Special
Name of Each Part
Safety
Attention
The Product is
quite heavy,
should carry it when untie
Damage
dropping
injury
or striking.
or
so more
or
place
than two
people
it.
Powder detergent box
for delayed washing
Do not press whit a pin or awl.
It can cause electric shock.
Water hose
30
softener box
25
Refer
Power
Bleach inlet hole
25
Place it
Tremor
or
Check if there is dusts
flat and solid floor.
on
noise
can
Refer
by
cause
be caused.
on
the
completely,
it there is dusts
unstable,
fire
a
can
plug
on
the
plug
supply cord is
damaged, it must be
replaced by the manu-
Refer
High-intensity
then insert it
& connection is
be
plug
If the
stainless washing tub
or plastic washing tub.
facture
or
its service
agents
or
similarly qual-
NameofEchPrt
ified person in order to
avoid a hazard.
caused.
Control button
Power switch
Drain hose
Start/Pause button
Do not
place
any
heavy things
on
the top of it.
28
Turn the tap on & check connection.
When screws are loose,
Refer
water leak and that can
cause
electric shock
or
Lint filter
Washing wings
injury.
Vertical movement of
washing
operated when
a sufficient amount of laundry
is deposited.
punch
Adjustable
28
Handle the
It
causes
plug
& switches with dried hands.
electric shock
Do not
use more
than 70°C hot water.
Plastic parts might be transformed
damaged that causes electric
or
ignition.
legRefer
can
be
Set the proper water level, an
excessive amount of water
may increase
or
entanglement
of
laundry.
shock short circuit.
Accessories
Do not wash water
Abnormal tremor
proof
clothes
can cause
or
fabrics.
injury during spin.
Pull out the
long
plug during cleaning
time.
Water, dusts
when you don't
use
for
or
can cause
electric shock and short
circuit
by ignition
or
UP
calorification.
Water Hose
6P/No.3828EA3003F
Drain Hose
Height adjusting
plate (option)
Silent Cover
(option)
Detachable
leg
(option)
7
P/No.3828EA3003F
Function of Each Button
Changing
various functions is
in PAUSE state.
possible only
Selection button does not work when the washer is in
:
(Control plate
Option
How to
adjust
By pressing
the button, it
MEDIUM
may be different
operation (Except for water
according to various models)
the water level
How to
EX-LARGE
cycles [LARGE
SMALL
LARGE]
At FUZZY program, water level is selected
the amount of laundry.
based
automatically
on
Water level is set to LARGE for WOOL program.
Water level
can
be
adjusted
when the washer is in
even
use
level
button).
Displaying
process
Use to select the desired function among wash, rinse
In
and
Abnormal water
spin.
By pression, it cycle [WASH+RINSE+SPIN]
[SPIN]
[RINSE+SPIN]
[RINSE]
[WASH+RINSE]
[WASH].
case
abnormal
of abnormal
supply
Abnormal
drainage
Abnormal
spin : WASH,
Abnormal lid open
Abnormal
Use it to select hot
selected, hot
supplied
for
or
water is
cold water
supplied
(When
washing
for
In WOOL program, cold water is selected
(Hot water may damage the fabric.)
process
When
only
warn
only
and cold water
are
automatically
is selected, all process can't be done, wash
be done.
only
can
WASH
ECONOMY
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
Use to lock
or
indications
are
displayed.
WASH and RINSE LED blinks.
Use it to start
Pressing
or pause temporarily.
the button repeats start and
After 10 minutes in
a
temporary pause
temporary pause state, the power
will
:
RINSE and SPIN LED blinks.
sensing
:
All of water level LED blinks.
WASH and SPIN LED blinks.
overflowing sensing
:
All of process LED blinks.
automatically turn off.
appliance is fitted with a safety function that
automatically stops the operation of the washing
machine when it is exposed to heavy disturbance
This
on
the mains.
FunctiofEahB
unlock the control buttons to
155
HOUR96
START
PAUSE
How to select
1. Child Lock function
is
rinsing).
When hot water
LARGE
HOT
Additional functions
hot water
following
FUZZY
EX-LARGE
How to select temp.
:
the
Start and temporary pause
RINSE and SPIN LED blinks.
:
Abnormal water level
operation.
WARM
operation,
operation
prevent all the
setting being changed by a child.
For locking, push two buttons simultaneously and for
unlocking, push two buttons one more in washing process.
During locking, All program's LED will blink on display.
How to
a
washing program
delayed washing
Use this function for
Use it to select
washing programs.
the button, it
By pressing
ECONOMY
cycles[FUZZY
WOOL
FUZZY].
use
SOAK
Use it to set the
delayed washing.
delay
time.
the button, it
By pressing
cycles
[6 9 15(6+9) 6]hours.
To cancel
delay time,
turn the power
switch off.
is selected, HOT & COLD LEDS
are on.
8
P/No.3828EA3003F
9
P/No.3828EA3003F
Care Before
Washing
Laundry Handling
Check
clothes
pockets for any articles (They
or the washer).
Preparation
may
damage
before
washing
Brush off dust and soil from clothes.
2
1
Connect the water hoses.
30
Refer
Prepationbfwshg
1
Check the label of the garments for the washing
method. Clean partial stains before washing.
Wash colored and white clothes
separately.
2 Open the faucets.
30
Refer
3
3 Connect
the power
to the outlet.
Since
bulky and light laundry may float, buy a
washing net and wash them a few at a time(parker,
jumper, etc.).
Since
stringed
entanglement,
4
clothes may cause
tie them or use the washing net.
or
long
plug
Connect the drain hose
4 and
then lower the drain
hose.
28
Refer
Level the washer
5
Floating laundry
may get
When you
washing net,
use a
dissolving it,
so
It may
damaged.
insert
that undissolved
detergent
detergent will
after
come
to increase the noise
during spin,
by
5 using from adjustable
leg.
28
Refer
do
not care about it.
not
be left in the net.
10
P/No.3828EA3003F
11
P/No.3828EA3003F
Fuzzy Washing
FUZZY
EX-LARGE
WARM
LARGE
WASH
ECONOMY
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
15
START
HOUR96
PAUSE
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
FuzyWashing
2
In
Fuzzy program.......
The washer
senses
of rinses and
While
spin
sensing
the amount of laundries and sets the most
time
the most
appropriate
water
level, each
higher. Manually adjust proper
Bulky and light laundry may
adjust the water level.
or
water level
the
lamp
P/No.3828EA3003F
1
2
blinks in turn.
laundry is wet, water levels may become
operating the washer.
cause a
water level lower than usual. In this case,
manually
39
12
not use
supply may be resumed about 2 minutes after
water level adjustment function.
12
time, number
water level before
laundry that may easily be discolored, do
Water
water current, wash
by itself.
If either the inner-tub contains water
For
appropriate
Press the Power button.
3
[SOAK] washing.
starting
the wash. It is
6
an
automatic
Deposit laundry
and
push START/PAUSE
Deposit laundry before pressing
Deposit detergent
Electric power
"boo--" sound.
button.
the START/PAUSE button.
and close lid.
automatically
turns off 10 seconds after the
washing cycle finishes
with
13
P/No.3828EA3003F
Economy Washing
FUZZY
EX-LARGE
WARM
START
LARGE
WASH
ECONOMY
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
15
HOUR96
PAUSE
2
Use this program for
washing
little
dirty laundry within short time and less than 2.0kg laundry.
1
2
3
Deposit laundry.
4
Press START/PAUSE button.
12
63
14
P/No.3828EA3003F
Press the Power button.
Select
59
EconmyWashig
4
[ECONOMY] program.
Preset program
:
6-minute wash,
Deposit detergent
one
rinse, 3-min spin.
and close lid.
If the lid is not closed, the machine cannot start
Electric power
"boo-" sound.
automatically
washing,
it generates the alarm sound.
turns off 10 seconds after the
washing cycle finishes
with
15
P/No.3828EA3003F
Soak
Washing
FUZZY
EX-LARGE
START
LARGE
WASH
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
WARM
ECONOMY
HOUR96
15
PAUSE
3
Use this program for
This program
Do not
use
washing heavily
provides
the best
this program for
Preset program
:
60-minute
soiled
washing
laundry after soaking it
that
15 minute
easily discolors.
wash, 2-rinse. 5 minute
spin.
Deposite laundry
3
Select the
4
Press the START/PAUSE button.
12
3
6
P/No.3828EA3003F
for soak
2
59
16
Press the Power button.
effect.
washing laundry
soaking.
in water.
1
SoakWshing
4
washing.
[SOAK] Washing program.
Press the program button two times.
A proper water level and the amount of
Deposit detergent
detergent
is
displayed.
and close the lid.
If the lid is not closed, the machine cannot start
Electric power
"boo-" sound.
automatically
spinning,
it generates the alarm sound.
turns off 10 seconds after the
washing cycle finishes
with
17
P/No.3828EA3003F
Wool
Washing
FUZZY
EX-LARGE
WARM
LARGE
WASH
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
ECONOMY
15
START
HOUR96
PAUSE
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
2
How to
Spread
wool and
dry
wool and
lingerie
clothes
on a
lingerie
shady, flat
surface.
clothes
In
case
of
using a clothes hanger, wrap the upper
the hanger with a towel to maintain the
portion of
shape of the
neck
drying
can
be smoothed out
by
ironing.
Do not select MEDIUM
Only
cold water is
or
SMALL water levels.
Laundry may get damaged.
dry cleaning, deposit proper
Use this program for delicate and weak laundries like wool clothes and
with [WATER-WASHING] marks only).
Select
3
Deposit laundry
49
amount
63
In wool
For
[WOOL] program.
washing,
laundry
with
WATER LEVEL is
always LARGE.
and press the START/PAUSE button.
fragile buttons, etc.,
Deposit detergent
turn them inside out.
and close lid.
Electric power turns off automatically 10 seconds after the alarm sounds, when
washing completely finishes.
clothes
Wash less than
Do not wash
can
be
Since
2.0kg of laundry at a time.
altogether with white clothes, bright-colored
lingerie(Wash
2
12
set(Hot water may damage laundry).
When you use neutral detergent or detergent for domestic
of detergent based on the 'Instructions for detergent'.
Wolashing
Press the Power button.
shoulder section.
or
Weak wrinkles after
1
3
easily
spin is 'weak'
18
P/No.3828EA3003F
clothes
or
dark-colored clothes which
discolored.
for WOOL program, water may
drop
even
after
spinning.
19
P/No.3828EA3003F
Reservation
This
Washing
conveniently for
the every washing type.(except
for WOOL program.)
can
be used
When you want to cancel
reservation for delayed washing,
switch the power off and start
again.
FUZZY
EX-LARGE
WARM
LARGE
WASH
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
ECONOMY
15
START
HOUR96
PAUSE
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
23
How to set the reservation time
Example : It's 7 a.m. now.
as in the figure below.
When you
push
If
you'd like your wash
the button, the reservation time
to finish at 10 p.m. set the time
changes [6
9
15(6+9)
6]
15
repeatedly.
HOUR96
1
ResrvationWhg
4
Press the Power button.
2
Select
3
Set the Time.
You
can
a
program.
choose every
washing program except
for
[WOOL] washing.
RESERVATION
How to put the
For
detergent
into the
detergent
For
powder detergent
Put into the exclusive
Put the
Pull out the box and
rate of 1:1.
close the box
detergent box.
put the detergent
then
detergent
Put the
bleaching
agent here
2
delayed washing is completed.
4 Deposit laundry and press the START/PAUSE button.
liquid detergent
after
again.
box
Press the RESERVATION button to set the time when the
diluting
it with the water at the
59
Deposit detergent
Make
sure
powder detergent
box and close lid.
in the
deposit detergent
powder detergent box.
with
the
for a long time, the laundry
laundry
detergent
to
If you leave
in the
may get
partially
discolored.
12
3
6
When the lid is
opened,
reservation
washing
cannot
proceed.
How to wash when you go out
3
1
When you cannot take the laundry out immediately after washing is completed,
select wash and rinse only (in this case, do not select spin to prevent wrinkle).
you'd better
Dry the moisture in and out of the box before inserting the
detergent (the detergent can become hard).
20
P/No.3828EA3003F
21
P/No.3828EA3003F
Other
Washings
Use it to select the desired
washing
is
cycle among washing,
rinse and
spin,
or
to
repeat
one
of them after
completed.
FUZZY
EX-LARGE
LARGE
WASH
ECONOMY
HOT
MEDIUM
RINSE
SOAK
COLD
SMALL
SPIN
WOOL
WATER
WATER
PRO-
PRO-
RESER-
TEMP.
LEVEL
CESS
GRAM
VATION
WARM
2
Wash
1
only
Press the
power switch
Press the PROCESS button until WASH
only
the water level
according
SPIN
WASH
RINSE
If the water level is not selected, it is
on.
laundry.
automatically
set to
[LARGE].
3
Deposit laundry
Deposit detergent and
lid.
Adjust the
water level
according
to the amount of
If the water level is not selected, it is
water level
according
In this case, amount of
selecting
rinse
laundry
only,
is
light
on.
laundry.
automatically
Press the PROCESS button until RINSE
Adjust the
lights are
set to
[LARGE].
on.
to the amount of
The washer displays the amount of
detergent and begins supplying water.
laundry.
automatically
set to
[LARGE].
it starts with water
supply.
Close the lid
RINSE
PROCESS
Press the PROCESS button until RINSE and SPIN
Adjust the
water level
Deposit detergent based on the
indicated amount.
If only [WASH or WASH+RINSE] is
selected, water will not be drained
after it is completed.
For draining, press the SPIN button
and the START/PAUSE button.
will not be sensed.
WASH
SPIN
close the
PAUSE
Press the PROCESS button until WASH and RINSE
When
AUTO OFF
4
Press the START/
PAUSE button
START
If the water level is not selected, it is
PROCESS
spin only
is
RINSE
SPIN
Rinse and
light
to the amount of
WASH
PROCESS
Rinse
4
RINSE
Adjust
only
PAUSE
WASH
PROCESS
rinse
HOUR96
2
SPIN
Wash and
15
START
according
to the amount of
If the water level is not selected, it is
lights
4
Press the
START/PAUSE button
are on.
laundry.
automatically
set to
START
[LARGE].
PAUSE
Spin only
WASH
RINSE
SPIN
Press the PROCESS button until SPIN
PROCESS
22
P/No.3828EA3003F
light
is
on.
Verifique
existieran
mismos.
los bolsillos por si
cosas dentro de los
If the lid is not completely closed, the
washer generates the alarm sound.
23
P/No.3828EA3003F
OtherWasing
Water Level and amount of
How to
Detergent
How to
In the
AMOUNT OF DETERGENT
AMOUNT
AMOUNT
OF WATER OF LAUNDRY
WATER
LEVEL
EX-LARGE
LARGE
MEDIUM
55L
46L
33L
REGULAR
CONCENTRATED
More than
3.6kg
About
About
About
About
31g
About
22g
using
the bleach agent
the bleach, it is necessary to
Put the
powdered bleaching agent
after
Put the
liquid bleaching agent with
into the
use
separating
washing
the
oxygenated
the clothes
bleach.
only for bleaching.
tub.
Bleach inlet
HowtusehBlacndSfr
46g
More than
2.0kg
37g
of
use
the Bleach and the Softener
55g
More than
3.5kg
About
case
use
How to
33g
use
Always deposit proper
washing.
fabric softener
amount of fabric softener
slowly into the fabric softener container before starting
Do not add to much softener.
SMALL
24L
More than
About
1.0kg
About
16g
24g
Softener
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of water
even
For
can
differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that generates less bubbles. This type of
detergent
is
specially designed
for
washers.
In
case
of
using liquid detergent,
dissolve it with
water(detergent: water=1:1)
and
deposit
it
through
the bleach
inlet hole.
REFERENCE
The softener is to be inserted
If you use laundry soap(neutral resin) for
on the inner-tub wall and cling to laundry
Using
excessive amount of
24
P/No.3828EA3003F
detergent
long time, dirt separated
during washing.
a
from
may reduce the rinse effect and
laundry may remain
pollute
the environment.
Insert the softener
yourself
automatically with the alarming sound
at the last time of rinse.
at the last time of rinse since softener can be failed to be inserted
automatically when the water pressure is weak (less than 0.5kgf/cm2).
Do not leave the washing machine with the softener in it more than 2 days. ( I could fail to insert
softener by itself when left with softener because of the solidating of softener.)
Do not put the bleach and softener directly to the clothes. (the clothes can be damaged of
discolored.)
25
P/No.3828EA3003F
Child Lock Function
If you want to lock all the keys to prevent all the setting from
child's wrong behavior you can use this child lock option.
Make
being changed by
How to
Press the POWER button.
2
Press the START/PAUSE
washing
conditions
sure
Otherwise,
How to lock
1
the Washer
Installing
are
key after all
set according to
to connect the
it may
cause
ground
wire.
electric shock!
ground
If AC outlet with
ground
terminal is used,
grounding
is not need.
the manual.
Preset all
washing
conditions
Other grounding method
Connect the
ground wire to the
ground copper plate and then
bury it under the moist ground at
least 75cm deep.
START
PAUSE
AUTO OFF
3
Connect the
ground
them.
installing it in an area
grounding is not possible,
purchase a short-circuit breaker
When
where
Ground wire
Short-circuit breaker
InstaligheWr
75cm
Ground copper
PRO-
PRO-
CESS
GRAM
plate
Place where
Never connect the
There is
no
ground
grounding
ground
All
process's
pipes, water pipes, lightning
plastic water pipe.
during
arrest or
telephone
outlets.
pipe
Led will blink.
Ground wire
How to unlock
If you want to unlock
should be avoided
wire to gas
effect in the
Gas
During locking,
wire to the
and connect it to the outlet.
Ground wire
Press both the process button and the program button simultaneously while wash is
proceeding, then all the keys are locked until completing the wash program or unlocking
ground
terminal at the outlet.
wash press both the process button and the program button
simultaneously again.
Distance between drain hose and the wall
Distance between drain hose and the wall should be
distance between the other part
more than 2 cm.
or
the
rear
more
than 10cm, and the
part and the wall should be
More than 10cm
More than 2cm
More than 10cm
26
P/No.3828EA3003F
27
P/No.3828EA3003F
Installing
the Washer
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must be obstructed by carpeting when the washing
is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be less than 1°.
How to
adjust
level
Installation
1
Install the washer
on
machine
2
area
Checking
level
flat and firm surface.
Open
the lid, and check it the washer is
correctly leveled by looking
down from the top.
3
Checking slope
4
Horizontal
setting
5
Confirming
level
Adjustable leg
Check if installation surface is tilted.
(Try to shake the washer and check
firmly installed.)
if the washer is
Lift up the front of the washer and level the washer
clockwise or using the
turning the adjustable legs
adjusting plate.
by
Place the washer to
level
the
as
in
figure
2.
original position and confirm the
(Try to shake the washer and confirm
level.)
Connect the drain hose
Connect the drain hose to the outlet of the drain
Fix the drain hose with the
located at the back side of the
And then
Keep
it downward while the
ensure
the hose is free from
28
P/No.3828EA3003F
washing
washing
kinking.
machine.
machine is
push
clip.
body
it toward the
as
in the
figure.
working.
29
P/No.3828EA3003F
InstaligheWr
Installing
the Washer
Connect the inlet hose
How to connect the hose of
one
(One
touch
type.
touch
1Untighten
Used the horizontal faucet
Connectiong
type)
the upper connector
Upper
that rubber seals
packing
Fixing screw
Horizontal faucet
Middle
connector
In
Extension faucet
case
the
the diameter of the faucet is
Square
large
remove
1Ensure
the cold inlet
2Connect
hose having the blue end
or
guide plate.
Guide
blue
are
fitted.
Attach the
end of the cold hose to
cold water tap and then
screw
it
tightly
Straight
a
that
so
End
Rubber Seal
water will not leak.
Water
Hose
plate
faucet
Supply
Attach the elbow end of the cold hose to the
cold valve inlet with the blue strainer and then
it
screw
Push the upper connector up till the rubber
the faucet.
3
packing is in tight contact with
Then tighten the 4 screws.
Connect the water
supply
Elbow End
that water will not leak.
the hot inlet
3Connect
having
or
Upper
red
Connector
the red end
Attach the
water
straight
tap and then
end of the hot hose to
screw
it
tightly
so
a
Straight
hot
that water
End
Rubber Seal
will not leak.
markings.
Water
Hose
Plate
Upper
Rubber Seal
Strainer
hose to the middle
connector, pushing the plate down.
packing
tightly
so
Inlet
Valve
hose
Rubber
straight
markings.
Connector
2
(Screw type)
The inlet hose is connected to tabs with 3/4" thread.
screw.
Rubber
Connector
inlet hose
Supply
Connector
Attach the elbow end of the hot hose to the hot
Water
hose
Middle
connector
valve inlet with the red strainer and then
supply
tightly
so
screw
it
that water will not leak.
Elbow End
Strainer
Rubber Seal
Inlet
Valve
Turn the middle connector not to have water leaked.
To separate the water supply hose from the middle
connector shut off the faucet. Then pull the inlet hose
down, pushing the plate down.
How to connect the hose of
Place
sealing
connect to
Place
washers into the
screw
straight
tight.
nuts are
It's the owner's
hoses
so
responsibilty
to connect the inlet
that water will not leak.
type
washers into the elbow ends of the inlet hoses and
connect to machine inlet valve.
The inlet hose and the inlet valve with
that the hose
ends of the inlet hoses and
taps.
sealing
4Make
sure
orange-colored
end is for hot
SEALING
WASHER
TAP
END
MACHINE
END
Connectiong tap adapter(Optional)
For
SEALING
WASHER
connecting
the inlet hose to taps without thread the tap
adapter
is
provided optionally
on some
models.
water and the inlet valve with blue colored end is for cold water.
After
securing
the inlet hose check hose connections for leaks and
correctness, cold to cold and hot to hot.
the
fixing
of the adapter.
1Unscrew
screws
Unscrew the 4
fixing
screws
of the tap
so
upwards so that the rubber seal within
adapter can completely adhere to the
tap.(Take care that the rubber seal will
come off while pushing.
2Fix
tap.
the tap
adapter to the
30
P/No.3828EA3003F
fixing
adapter
Screw
Tap Adapter
not
fixing screws towards the wall and
by hand or with a screwdriver to fit
size of the tap diameter. Then tighten the
tighten
the
the tap
the
Fixing
Place 2
ti
indicated 2
After
Rubber Seal
that the tap can be placed in the
middle. Push the connector vertically
adapter
connect the inlet hose
screws
to fit the
according
tap.
to the above instruction.
31
P/No.3828EA3003F
InstaligheWr
Maintaining
the Washer
When the water
substances like stone
If the filter is
supply is bad, check
clogged with dirt, water
cannot flow into the washer. Clean the filter
Cleaning
Before
1
cleaning
or
sand inthe filter.
regularly.
1
the filter in the inlet valve
the filter in the inlet
valve, completely
Turn off the faucet and press the power switch.
Select cold & hot water and press START/PAUSE
button. Let the washer operate for 5 seconds.
remove
2
To prevent freeze in winter
Close faucet and
remove
the water
hose. Direct the hose toward the
bottom and
completely remove water
2
Press the SPIN button and let it
for 1 min. to
remove
spin
water from the
tub and drain hose.
3
Unplug the power cord.
3
Submerge
from the hose.
the water
remaining
in the water hose.
Switch off the washer and disconnect the power
cord.
When frozen
1
3Disconnect
water
Remove dirt with
hose, and remove filter from the inlet valve by hand
tooth brush, etc.
or
1
arrow
the water
hose.
2
Pour 50°C of hot water inside
the tub and leave it for 10 min.
the
separated
hose
in 50°C of hot water
MaintgheWsr
4
Connect the water hose to
Connect the water
5
the washer and then start
the washer. Pour 50°C of
hose to the faucet
and check if water
hot water into the water
is
draining.
hose.
pull
forward
the lint filter from the
tub to the
remove
the
with tools.
the lint filter
Press and then
faucet and
on
a
Then insert it back into the water inlet.
Cleaning
Pour 50°C of hot water
washing
direction.
2
Turn inside out and wash it to
remove
dirt.
3
Insert it back into
place
("Click").
Stainless steel inner tub won't be rusted.
However, external
Metal
product(like hairpin,etc,)
Water with
Water
rust may
or
a
cling
that
can
to it in the
lot of iron substance is used for
chlorine
following
causes:
be rusted is left inside the tub for
a
long
a
long
time.
time.
type bleach is left inside the tub for
a
long
time.
If rust is
When the lint filter is
worn
32
P/No.3828EA3003F
out, etc., contact
a
LG Service Center for
found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
new one.
33
P/No.3828EA3003F
Troubleshooting Guide
If
a
abnormal
symbol appears
in the
display window,
check the
following
before
asking
for
service.
SYMPTOM
ITEM TO BE CHECKED
Abnormal faucet
SYMPTOM
Abnormal level
ITEM TO BE CHECKED
sensing
WASH
SPIN
Ask for service center
Abnormal level power
RINSE
Is the faucet
closed?
Is the faucet
frozen?
Is water supply
discontinued?
Is the water
pressure
lowered or the
filter clogged?
Is hot water selected when only a
cold water hose is connected to
the cold valve?(In this case, select
cold water.)
Abnormal level
overflooding
No power
Abnormal
drainage
WASH
AUTO OFF
RINSE
SPIN
Is the power switch
Is the drain hose lowered?
Is the drain hose bent?
Is the doorsill too high?
pressed?
Is the drain hose frozen?
plug firmly
Is power supply correct?
Is the short-circuit breaker
closed?
No
Abnormal
Is the power
connected?
operation
START
spin
PAU E
WASH
RINSE
SPIN
Is the lid closed and the
Is the tub filled with
START/PAUSE button
amount of water?
is
Is the
laundry gathered
to one side?
Is the washer tilted?
Is the faucet closed?
pressed?
Excessive vibration and
noise
Opened
required
during spin
lid
WASH
RINSE
Is the washer installed
on
firm and level surface?
SPIN
(At this time, buzzer sounds
with lamp indication)
34
P/No.3828EA3003F
Is the lid closed? If the lid is open, alarm is
rinse and spin cannot be
generated and
proceeded.
Is the lid closed after setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
Water
and rinse
It is normal, the washer is
after
it
to one side.
supply
pausing
rinse or spin.
during
No
special
automatically correcting the laundry gathered
action is needed.
35
P/No.3828EA3003F
TroubleshtingGd
Memo
36
P/No.3828EA3003F
Memo
37
P/No.3828EA3003F
Memo
Specifications
H
D
W
Water pressure
Revolution
:
30 800kPa
-
(0.3kgf/cm2 8kgf/cm2)
-
Specifatons
speed of the wings : 130rpm
Weight : 32kg
Dimension
:
The appearance and
38
P/No.3828EA3003F
530mm(W)
530mm(W)
×
×
540mm(D)
540mm(D)
specifications
×
×
850mm(H) WF-S5201(5), S6201(5)
900mm(H) WF-S5211(5), S6211(5)
may be varied without notice to raise the units
quality.
39
P/No.3828EA3003F
Download PDF