DISHWASHER OWNER'S MANUAL MODEL : LD-2120WH / LD-2120SH / LD-2120MH LD-2120WHB / LD-2120SHB / LD-2120MHB LD-2120WHU / LD-2120SHU / LD-2120MHU Please read this manual carefully before operating your dishwasher. Retain it for future reference. CONTENTS SAFETY AND CAUTION 3 INSTALLATION INSTRUCTIONS 5 PARTS NAME 9 FUNCTION OF CONTROL BUTTON 10 HOW TO USE AND OPERATE 11 OPERATING 17 SEQUENCE PROGRAM 18 USER MAINTENANCE INSTRUCTIONS 19 TROUBLE SHOOTING GUIDE 20 SPECIFICATION SAFETY AND CAUTION IMPORTANT SAFETY INSTRUCTIONS WARNING ? Please read this manual using ? ? ? carefully before ? instructions. This dishwasher is designed for normal Do not by ignoring or ? these problems safety and caution the dishwasher for industrial and commercial use, or other purpose. The appliance is not intended for use by or ? ? ? accordance with the safety is rating label. only guaranteed when regulations.(Do not use an extension cable ? If power supply cord is damaged, it must replaced by the manufacturer or its agent or a similar qualified person in order to avoid ? This a hazard. must be or sit on the inner door use the detergent for hand washing. being changed by a child. Keep children away from rinse-aids. ? Do not allow children to operate the detergents and dishwasher. ? Young children should be ensure that appliance. During use Only suitable household utensils placed in the dishwasher. Safety Controls may be locked using "Child Lock" mode to prevent from all the setting ? that appliance positioned plug is accessible. The appliance is to be connected to the water mains using new hose-sets and that so old hose-sets should not be reused. ? down detergent for dishwasher should be operation. This appliance is fitted with a safety function that automatically stops the operation of the dishwasher when it is exposed to heavy disturbance on its mains. Dishwasher detergents are strongly alkaline. They can be extremely dangerous from the ? Do not Child cold water. service push detergent receptacle is empty after completion of the wash cycle. If the hot water exceeds 65ºC, adjust the water heater setting. If the hot water only Do not Check that the cord.) be or eyes and keep children away from the dishwasher when the door is open. temperature can not be maintained below 65ºC, the dishwasher must be connected to ? Do not spray water on the appliance. It may cause the failure of electric parts if swallowed. Avoid contact with skin and the earth system of your house is in accordance with the related local ? explosion used for normal Electrical connection must be in or an The infirm persons without During installation Electrical They may cause fire. opened. It may cause the deformation or failure of your dishwasher. supervision. ? any kinds of solvent in your use when the door young children ? precautions, electric shock. ? use. use Do not dishwasher. maintenance of your dishwasher. The manufacturer can not be responsible caused basic (Please avoid utensils; that are nonheatresistant, metal decorated, etc.) the dishwasher for the first time. household ? using your dishwasher, follow including the following: When This manual contains very important notes regarding the installation, use and for ? - should be 3 they do not supervised play with the to SAFETY AND CAUTION CAUTION concerning the Power Cord appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Most which powers damaged wall outlets, extension are damaged dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not overload wall outlets. Overloaded wall cords, frayed power cords, or or outlets, loose or cracked wire insulation SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. This WARNING - Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not fit the outlet have modify the plug provided with the appliance; if it will a proper outlet installed by a qualified electrician. Disposal of your old not appliance 1. When this crossed-out wheeled bin product it means the Directive 2002/96/EC. a a product symbol is attached to by the European is covered 2. All electrical and electronic products should be disposed of from the separately municipal waste stream via designated collection facilities appointed by the government or the local authorities. disposal of your old appliance will help prevent potential negative consequences for the environment and 3. The correct human health. 4. For more detailed information about of your old city office, waste where you purchased the appliance, please service or the shop 4 disposal contact your disposal product. INSTALLATION INSTRUCTIONS 4 WARNING If dishwasher is to be installed in Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. cabinet Step1: This dishwasher is size shown as designed corner, or a wall. Step2: PREPARE CUPBOARD OPENING 1 a minimum 5cm of space is required between the washer and an adjacent a PREPARE ELECTRICAL WIRING to fit to the CAUTION below. For 2 Select a possible location as close to sink personal safety, remove house fuse open circuit breaker before installation. Do not use an extension cord or adapter plug with this appliance. Electrical and grounding connections must comply with the national electrical code/provincial and municipal code and/or other local codes. as or for easy connections to water and drain lines. 3 The dishwasher should not be installed more than 3 meters from sink for proper drainage. 1 This appliance must be supplied with rating voltage and hertz as shown correct instruction manual, and connected to individual, properly grounded branch circuit, protected by minimum 13 amp on an circuit breaker Wiring 2 or time must be 2 delay wires with fuse. ground. The power plug must be in a accessible location adjacent to and not behind the dishwasher and within 1.2 meters of the dishwasher 3 side.(See page 7 The power plug must be correctly earthed, if in doubt, have it checked qualified Electrician. plug. If bare chipboard is adjacent to or above the dishwasher, it should be sealed with a waterproofing paint or sealant to prevent swelling due to steam. 5 by a double by a appliance same plug No other should be connected to the outlet Unit:mm Fig.A) adapter or similar INSTALLATION INSTRUCTIONS Step3: Step4: PREPARE DISHWASHER FOR INSTALL THE DISHWASHER IN INSTALLATION CUPBOARD the dishwasher 1 Lay 2 Adjust the cabinet as legs on its back. to the needed shown in below height figure. Before sliding the dishwasher into the cupboard opening, all necessary final height adjustment and balancing adjustment should be done using the spanner. 1 of 2 Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet is not kinked or stretched. CAUTION If the height of cupboard is below 850mm, you should remove the top table the 2 screws. (Two of rear) 6 by unscrewing INSTALLATION INSTRUCTIONS Step5: DRAIN LINE CONNECTION 1 If the end of drain hose does not fit to When the drain hose is connected to the drain line, separate stand pipe, it is essential that air tight connection is made. of rubber piece connector(not supplied) that must be resistant to heat and detergent and may be obtained from a plumbing shop. 2 There are shown in use a 2 typical connections Figure A, B. Refer to a an Fig.B as The "S" trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage. To prevent siphoning, one of the following instruction methods must be followed: When the drain hose is connected to a sink "s" trap or waste disposal unit, the hose must be looped up to the underside Fig. B : Drainage connection - stand pipe. of the bench top and secured. Drain Hose Extension Extend Drain Hose Fig. as shown below. A CAUTION When you connect or extend Drain Hose, make sure that drain hose is not kinked. (Bends should have 40 mm radius.) 7 INSTALLATION INSTRUCTIONS Step6: Step8: WATER SUPPLY CONNECTION HOW TO LEVEL THE PRODUCT 1 Connect the water supply hose to the hot This dishwasher may be fed with either or cold water. If the water can not be installing the product, if you feel some sticky or hear a frictional sound between the side portion of door and tub when you open or close the door, you have to adjust the level of product. maintained below 65ºC, the dishwasher must be connected to cold water. Case 1. In behind dishwasher and the water tap shown in figure. 2 After valve as case the door is slanted to the right connecting, the sealing tape or sealing compound should be used to avoid When water leaks. Make sure sharply that the line is not kinked or bent. Fig. C Water tap ? If the door is slanted to the right as shown in figure C, repeat the procedure shown until the door is back side and ? leg of the should be Valve the left the level. high opening of door if there still remains sticky or friction sound. When the product is correctly leveled, There 2) Check supply below operated normally. 1) Unscrew(counter-clockwise) Water hose as Case 2. In no slant case , stickiness or friction sound. the door is slanted to the left Step7: FINAL CHECK AND ASSEMBLING 1 Securely hand tighten supply hose to supply. Plug power supply cord into an earthed the power plug and switch on. water 2 After installing Fig. ? the product, operate the dishwasher through one cycle (Quick cycle is recommended) without loading the dishes. Through this, you can check for water leak and operating conditions. When you operate the product the ? first, the noise may be occurred. D If the door is slanted to the left should be In that case, turn off power switch and restart the dishwasher. 8 as shown in figure D, repeat the procedure shown as below until the door is operated normally. 1) Unscrew(counter-clockwise) the right leg of back side and high the level. 2) Check the opening of door if there still remains sticky or friction sound. When the product is correctly leveled, There no slant , stickiness or friction sound. PARTS NAME 1. Control Panel 10. Adjust Leg 2. Door Handle 11. Upper 12. Cutlery 13. Detergent 3. Front Cover 4. Lower Cover 5. Process Monitor 6. Power Switch Rack Rack & Rinse Aid 14. Vapor 15. Upper Spray 16. Lower Spray Arm Arm 7. Drain hose 17. Filter ASM 8. Inlet hose 18. Lower Rack 9. Power Cord 19. Salt Container Inlet Hose Dispenser Vent Cover Cap Funnel The appearance and specifications may be varied without notice according to localities. In the case of some models, a Inlet hose can be united with a product. 9 FUNCTION OF CONTROL BUTTON DELAY START TIME LEFT ? ? ? Before starting, the display window shows the the selected program. After starting, the display window shows the If the dishwasher has a running time of remaining ? time. Drainage : Problem of trouble, the trouble type is displayed. overfilling ? Refill with specil ? salt Refill with rinse aid pressing program button. water ? : If you want to delay the start of selected program, press this button before trouble : INDICATOR Water inlet trouble Pressing the delay time will increase If this : Water : Heater trouble error letters " : No time ? are displayed, please refer to guide. error message ? Used to lock or unlock the control buttons to prevent all the setting from being changed by a child. This function is ? locking/ unlocking, press Auto and Eco button for few seconds a The dishwasher must be ? The set PROGRAM ? switched off. beep on/off function can be by pressing the Quick and When you want to select program, press each button. POWER ? ? Pre-wash button for simultaneously seconds. then, canceled when power failure occur. For 1 hour to 19 hours. BEEP ON/OFF automatically ? by 1 hour. delay start time can be adjusted from The (See page 17) CHILD LOCK ? the trouble page 21 and follow the shooting guide " trouble leakage in the time ? a operating, press this button first for power on. After operating, this button a automatically safety and energy saving. In case of irregular switches off for few "on" will appear display. ? The beep on/off function is automatically canceled when power failure For occur. surge disturbance to the machine, the power may be automatically turned off for simultaneously. 10 safety. HOW TO USE AND OPERATE 1. Loading your For the best Be careful large items do not to prevent the detergent dispenser from opening Dishwasher washing performance, it is important that the dishwasher is loaded according to instructions. Before loading items into the dishwasher, you must scrape off large particles in particular non soluble items such as bones, toothpicks, pips, etc. loading the dishwasher, following general guidelines: When Position crockery 3. Cutlery nesting observe the the 2. prior and facing upside soup bowls, dishes, pots, pans, lids the grill tray. positioned upright and the center of the rack. must be turned down. Take care not to obstruct the rotation of the spray arms. Soup plate Soup plate Dinner basket to prevent cutlery with the handles down. The care sharp the Lower Rack Pots, pans and large dishes cover Take on even Plates should be cutlery of similar items. Place the in cover knives located at upper rack. at an The lower basket is best loaded with dinner plates, Basket be hinged and clipped away from the basket if you choose not to use them. For the knives, place at separate rack for scraps should be to loading in the dishwasher. Loading Cutlery can such that water will Deep based items should be placed angle to help water run off and dry properly. soaked the should be mixed within each section of the contact all surfaces. Items with burnt Using lid plate 11 when items. loading and unloading HOW TO USE AND OPERATE 4. Loading the Upper Rack 5. (Not The upper rack is best loaded with more delicate items, small plates, long cutlery, plate bottom facing positioned spray care arm models) can be raised or lowered to crockery. Before After adjusting, check that the spray is free to rotate. not to obstruct the rotation of the under the upper rack. Front Non Dishwasher Safe Items The combination of high water temperatures and dishwasher detergent may damage particular items, therefore we do not recommend dishwasher to wash the using the following: WARNING Copper or anodized aluminum Hand painted silver or gold leaf crockery Wood Iron or Before adjusting, ensure rack is empty of all crockery. Otherwise crockery may be damaged or you may be injured. bone handled utensils or non rust proof utensils Plastic items which are not Rack upper and lower rack. Extra cups or cooking utensils can be laid on the fold down cup racks which may also provide support for long stem glasses. Take Upper adjusting, ensure rack is empty of all crockery and side the rack out. Reinsert the rack in the chosen position. Fitting the rack back into the standard position reduces the space between the the front of the and bowls must be all the cater for different size of rack. Cups, glasses upside down. on Your upper rack cups, glasses and dishwasher safe plastic items. Plates should be positioned upwards with the Adjusting dishwasher safe. 12 arm HOW TO USE AND OPERATE 6. ? Adding Detergent Dispenser Detergent must be chamber before Push latch to open put into the detergent starting every program except the Pre-Wash. ? ? Please follow the manufacturer's instructions printed on determining the correct If your dishes the manual when dosage. Place proper detergent into this only moderately dirty, use less detergent than are you may be able to recommended. ? ? 15g and 25g. The amount of detergent depends on program. Refer to the guide table. compartment Chambers hold the PROGRAM AMOUNT OF DETERGENT Auto 20g Eco 15g Quick 10g Pre-wash No WARNING The detergent detergent and detergent used is a special Dishwasher like all household chemicals it should be treated as harmful and kept out of reach of children. After completion of the chamber lid should be closed. wash program, the detergent compartment should be checked and any remaining ? The detergent ? The chamber lid remains open after ? After the detergent is supplied, the detergent is dispensed automatically during the operation. WARNING operation. # Attention Detergent Use only the removed. Information detergent intended for household dishwashers. washing detergent because the foam Using combined detergent products(ex.3 in 1) Some products integrated rinse aid work best specific programs only. Yow will obtain optimum rinsing and drying results by using conventional and separate (Ordinary hand- should not be used, can : salt and rinse aid. interfere with proper Products that operation.) only replace regeneration salt a specific water can be used within hardness range. Please contact the detergent manufacturer if the drying performance is very poor or you find the white film, when you use the combined detergent products. We do not warrant the complaints that are directly related to the use of these products. 13 HOW TO USE AND OPERATE Adding Rinse Dispenser 7. For Aid filling To fill the Rinse Aid chamber, rotate the round cap counter clockwise and remove. Fill the container to the maximum level with a during The Rinse Aid, then good quality and lock the cap. The Rinse Aid is replace automatically dispensed cycle. the final rinse dosage setting most installations. is factory set to suit If, after washing, you notice cloudy spots, streaks or water marks your glassware, it may be necessary increase the setting. To do so, remove the on cap and rotate the indicator arrow to a higher setting then replace the cap If the . there is foam present glasses on the bottom of the glass or the bottom of are smeared the machine. Select For or a lower setting. refilling Depending on the dosage setting and the number of washes, the chamber may need only to be topped up once per month approximately. The rinse aid level can be by two methods. By the indicator window on the dispenser when the dishwasher door is fully open. checked ? Rinse Aid Information Black indicates sufficient Rinse Aid O ? Clear indicates Rinse Aid By the light on dishwasher is When the the control working lamp is required panel when the Rinse Aid is necessary in order to get spot and streak free dishes as well as improved on. drying. Using the correct amount will improve wash performance. However, using too much can produce excess foam leading to possible water leaks. lighted on, it means Then, refill the rinse is almost exhausted. the Rinse. 14 HOW TO USE AND OPERATE 8. Salt Filling This model has a water softener to soften hard water. So you should read these notes carefully for correct operation. In order to or no provide satisfactory rinsing results, the dishwasher requires soft water, i.e.,containing little lime, otherwise water stains will be left behind on the dishes and interior containers. If the tap water exceeds a certain level of hardness, it must be softened, i.e.,decalcified, be used in the dishwasher. This is achieved by adding a special salt to the water softener inside the dishwasher. required amount of salt, is set up according to how hard The water softener, that is the For First ? ? ? ? so that it can the tap water is. filling Check the water hardness of your area. (Your water supplier will be able to inform you hardness and hardness range of the water in your area.) Set the water hardness according to the setting method of the water softener. unscrew the cap of salt container. Fill the salt in the salt container before using your dishwasher for the first time. Use on the Remove Lower rack and funnel for easy and clean filling. The salt container regenerating salt intended for dishwasher.) ? After ? Screw the cap filling, wipe off any spilled salt to seal the cap properly. tightly to prevent the suds penetration that may Setting Adjust capacity is about 1.9 up the water the water a kind of coarse softening salt or troubles. softening system the water softener to the water in the cause kg. (Use setting given in the table that corresponds to the hardness of the where you live. The water softener can be adjusted in 8 steps. The dishwasher is programmed at the factory for a water hardness level of ". area " The water hardness level which has been by using the buttons on the control programmed into the machine can be checked and altered panel. 1. The dishwasher must be switched off. Delay Start and Power button simultaneously and 1 figure will appear in the time display. change the setting: 2. Press A" 3. To and keep them pressed. " Every time the Quick button is pressed, the figure The display is changed between and" ". " 4. Once the hardness The hardness is changed one by one. " setting is correctly adjusted, setting is then saved. 15 press the Pre-wash button. HOW TO USE AND OPERATE For refilling When the salt is exhausted, the salt refill lamp is lighted on automatically during operation. Then the salt should be refilled after finished the cycle. But it is recommended the salt refill should always any be done excess (as mentioned previous page) immediately. salt solution before starting next operation to thin and drain away lighted on, it means the salt is almost exhausted. Then, refill the When the lamp is Salt. Note ? After filling with salt, it may take a little while before the indicating lamp goes out. When the control is set to ", it is not necessary to fill up with salt as none will be consumed while the dishwasher is " ? If the control is set between " "and" operating. ", then salt must be added to the dispenser. WARNING Do not pour detergent into the container for special 9. Fold down dividers. (Not on all 10. models) improve stacking destroy the water softener. Drying At the end of the program, it is Fold-down dividers at the lower rack be lowered to salt. This would recommended to can assist in of pots fully open the door to drying. and pans. 11. ? ? ? ? ? ? Energy Test(EN50242) Appliance loaded in accordance with standard specifications. Example of loaded dishwasher : p.11~12 Capacity : 12 place settings Comparability course : Eco Rinse aid setting : 3 Reference cleaner : 6g of detergent onto the inside surface of the door and fill 24g into the detergent dispenser. Rack-U must be inserted in the uppermost position. 16 OPERATING SEQUENCE The indicator Press the "Power" button the come on. Check that there is rinse Before starting, the display window shows running time of the selected program. After starting, the display window shows the remaining time. The time in the display window will start the aid and salt The phases lights of the program and all the program consists of will corresponding indicator lights will illuminate if refilling is necessary. to decrease from minute to minute. Open the door and check If the door is a they are positioned (See Instructions"). clean and properly "User Maintenance At the end of the Remove any scraps of food. Pull the lower rack out and arrange the program cutlery operating, "End"is displayed on the digital display for seconds and buzz sound informs you that the program has ended and then the display shows "Cd" code. this means CAUTION "Cool Do not load the items in upper rack with the lower rack is pulled out and loaded. Ensure that the spray more dry-"Cd" minutes to diminish any If you want, you the dishwasher. detergent starting on remaining moisture. required amount of detergent the dispenser. Close the detergent dispenser lid. Setting working This process is not part of the program. At this time, the fan will operate for a few arms Add the and that the dishwasher is dry". Cool freely Measure out washing After in it. Pull the upper rack out and arrange the cups, glasses, etc. in it. can rotate of the that the interrupted. Load the dishes dishes and run program machine stops. Once the door is closed the program will start from the point where it was the filters Ensure opened during the safety device ensures can now Otherwise the dishwasher into switches off for safety open and unload automatically saving and energy later. CAUTION the the lower rack first and then the upper water dripping from the upper rack onto the dishes in the lower one. Empty one;this will avoid program Press the program button to select the program. After 3 seconds, the machine will be Warning In it is not advisable to open the door while the machine is working; If the door is opened however, a safety device operated. If necessary, select the option function corresponding to the desired program. general that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a program has ensures 17 finished, as steam may escape. PROGRAM According to the water temperature, pressure, voltage, running Running time doesn't contain "Cool dry 60 min". time may be varied. - WASH Program Pre Wash RINSE Main Wash Rinse 1 Rinse 2 Rinse 3 Heating DRY Rinse Cool dry The program sequence is optimized and adapted in accordance with how dirty the dishes are. Auto 45 65 35 40 Eco Quick Pre-wash Auto Wash Eco Wash During the Auto program, the degree of soiling in the dishes is determined by the amount of clouding of the water. According the degree of soiling, the program automatically adjust the washing time, temperature. As a result, the energy and consumption The "F" is on sensing "Cool is kept display as as cutlery. sensor the status of the dishwasher. dry" soiled everyday loads. Quick Wash possible. that the normally This program is for that quick wash of lightly soiled recently used dishes and water low means This program is for is not part of the program.(See page 17) Auto Restart If the dishwasher is turned off by a power failure, it will restart the position it stopped at adjusting accordingly. automatically from 18 USER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is arms at intervals. important to check and care for the filters and spray Upper Spray Arm Filters ? Remove the lower rack first. ? ? Turn the mesh filter counterclockwise off. ? ? Take out the mesh filter, upper STS filter and outer filter. ? ? Pull the upper rack forwards. Check that the water jet holes blocked ? Clean them if necessary. Replace them in the reverse order. ? by food When necessary to clean, by unscrewing the nut. Clean the spray order. arm reverse mesh filter upper STS filter Upper spray arm outer filter Lower ? Check that the water jet holes blocked ? Spray Arm by food are not remove the particles. When necessary to clean, arm by pulling up. ? Clean the spray down. arm and replace it pulling 19 are not remove the particles. and replace arm it in the TROUBLE SHOOTING GUIDE If a problem occurs in your machine, call for service. Before you call for service, check the below instructions to problem can be solved by yourself first. on do not lamps pumped Fuse blown ? The ? Door is not ? The start button is not ? The drain hose is kinked. code) ? The filter is show " shows " " (The display display code ? Excessive water is ? The inlet valve is troubled. ? Water is not ? Water ? Water is leaked (Automatically Drain ? The circuit of Heater is troubled. ? The mounting of spray arms is blocked by food particles. (Clean the holes of the spray arm) ? The amount of ? Salt is exhausted in the salt container. ? The salt container cap is not ? Too little Rinse-aid dispensed. ? Too little Rinse-aid dispensed. ? Incorrect amount of Pump operated) The display shows " The display shows " display shows The The spray away. " " " " " code code code does not rotate arms smoothly White deposits are dish washer after Streaks Dry are results on the washing. left on are not Washing results satisfactory. left glassware satisfactory. are not ? ? ? ? The display shows " inserted in the socket. Plug ? on. The machine does not start. Water is not is not ? come when the power switch The whether the Possible Causes Problem The see "code. properly circuit breaker or of the house electricity fully tripped. was cut closed. pressed. the clogged. (Clean filter) than normal water level. supplied supplied. (Water tap leakage off. is not opened) in Hose connections by damages. detergent or rinse-aid set securely incorrectly. screwed detergent. incorrectly arranged or overloaded. Filters are clogged. Water jet holes of spray arms blocked. Spray arms' rotation obstructed by utensils. Utensils ? Unsuitable program selected. ? No error message.(See 20 page 17) on. MEMO 21 MEMO 22 MEMO 23 LD-2120WH LD-2120WHB LD-2120SH LD-2120SHB LD-2120MH LD-2120MHB LD-2120WHU LD-2120SHU LD-2120MHU Capacity 12 Place Weight See rating label Power Supply See rating label Power Consumption See rating label Water Feed Pressure settings 50~800kPa For U.K. Customer CUSTOMER SERVICES Tel. Fax. P/No.: 3828DD7001M LGEUK SERVICE WEB-SITE : 0870-873-LGLG(5454) : 0870-872-7337 : http://uk.lge.com
advertising