LG | LD-2163SH | LG LD-2163MH Owner’s Manual

DISHWASHER
OWNER'S MANUAL
MODEL
:
LD-2160(3)W(S,M,L,T)H
LD-2160(3)W(S,M,L)HB
LD-2160(3)W(S,M,L,T)HU
Please read this manual
carefully before operating
dishwasher. Retain it for future reference.
your
CONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTIONS
5
PARTS NAME
9
FUNCTION OF CONTROL BUTTON
10
HOW TO USE AND OPERATE
12
OPERATING
19
SEQUENCE
PROGRAM
20
USER MAINTENANCE INSTRUCTIONS
21
TROUBLE SHOOTING GUIDE
22
SPECIFICATION
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING
?
Please read this manual
using
?
?
?
?
using your dishwasher, follow
including the following:
When
carefully before
?
dishwasher.
or
not be
responsible
for problems caused by ignoring these
safety and caution instructions.
This dishwasher is designed for normal
?
use
the dishwasher for industrial
During installation
?
Electrical connection must be in
?
Electrical
accordance with the
safety
is
rating label.
only guaranteed when
or
an
?
water heater
setting.
extension cable
65ºC, adjust the
supply
only be replaced by
damaged,
the manufacturer
?
This
appliance must be positioned so that
plug is accessible.
The appliance is to be connected to the
water mains using new hose-sets and that
Only
detergents are strongly
They can be extremely
dangerous if swallowed. Avoid contact
with skin and eyes and keep children
Safety
Controls may be locked using "Child
Lock" mode to prevent from all the setting
from
being changed by
child.
a
children away from
rinse-aids.
?
Do not allow children to
Keep
detergents
and
operate the
dishwasher.
?
?
Dishwasher
?
old hose-sets should not be reused.
During
use
washing.
The detergent for dishwasher should be
used for normal operation.
This appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its
Child
or
the
?
Do not
failure of your dishwasher.
the detergent for hand
or
it must
its service agent or a similar qualified
person in order to avoid a hazard.
?
push down or sit on the inner door
opened. It may cause the
empty after completion of the wash cycle.
to cold water.
cord is
Do not
away from the dishwasher when the door
is open.
Check that the detergent receptacle is
If the hot water
temperature can not be maintained below
65ºC, the dishwasher must be connected
If power
or
alkaline.
cord.)
If the hot water exceeds
explosion
mains.
the earth system of your house is in
accordance with the related local
regulations.(Do not use
cause an
Do not spray water on the appliance.
It may cause the failure of electric parts
deformation
?
infirm persons without
?
may
when the door
and commercial use, or other purpose.
The appliance is not intended for use by
or
They
fire.
electric shock.
?
use.
supervision.
?
any kinds of solvent in your
use
The manufacturer
young children
?
Do not
maintenance of your dishwasher.
Do not
precautions,
placed in the dishwasher.
(Please avoid utensils; that are nonheatresistant, metal decorated, etc.)
This manual contains very important notes
regarding the installation, use and
can
basic
be
the dishwasher for the first time.
household
?
-
use
Young
children should be
ensure
that
appliance.
suitable household utensils should
3
they
do not
supervised to
play with the
SAFETY AND CAUTION
CAUTION
concerning
the Power Cord
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and has no additional outlets or branch circuits. Check
the specification page of this owner's manual to be certain.
?
Most
?
damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the appliance.
?
Do not overload wall outlets. Overloaded wall
outlets, loose
or
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is installed and grounded in accordance with all local codes and
ordinances.
WARNING
-
Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the appliance; if it will not
fit the outlet have a proper outlet installed by a qualified electrician.
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
product
it
means
the
product
symbol is attached to
by the European
a
is covered
Directive 2002/96/EC.
products should be disposed of
separately
municipal waste stream via designated
collection facilities appointed by the government or the local
2. All electrical and electronic
from the
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and human
3. The correct
health.
4. For more detailed information about
disposal of your old
appliance, please contact your city office, waste disposal
or the shop where you purchased the product.
4
service
INSTALLING INSTRUCTIONS
Step2:
WARNING
A
qualified electrician/plumber
PREPARATION FOR ELECTICAL WIRING
or
competent person should carry
out any
to
CAUTION
electrical/plumbing work required
install this appliance.
For
remove house fuse
circuit
breaker
before installation.
open
Do not use an extension cord or adapter
personal safety,
or
Step1:
plug with this appliance. Electrical and
earthing connections must comply with
the national electrical code/provincial and
municipal code and/or other local codes.
PREPARE CUPBOARD OPENING
This dishwasher is
1
shown
2
Select
as
a
possible
To
fit the size
location
as
for
of connection to the
ease
water and drain
3
designed to
below.
ensure
close to sink
1
as
on
good drainage,
an
the dishwasher
more
4
circuit breaker
Wiring
a
corner,
or
or
a
time
must be 2
minimum 15 amp
delay fuse.
wire with Earth.
a
minimum of 5cm of space is required
between the washer and an adjacent
cabinet
instruction manual, and connected to
individual, properly earthed branch
circuit, protected by
than 3 meters
away from the sink.
If dishwasher is installed in
appliance must be supplied with
rating voltage and hertz as shown
correct
pipes.
should not be installed
This
2
wall.
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher
3
side.(See
page 7
The power plug must be correctly
earthed, if in doubt, have it checked
qualified
plug.
Any bare wood surrounding the dishwasher
should be sealed with a waterproof paint or
sealant to prevent swelling.
5
by
by a
appliance
same plug
Electrician. No other
should be connected to the
outlet
Unit:mm
Fig.A)
a
double
adapter
or
similar
INSTALLATION INSTRUCTIONS
Step3:
Step4:
PREPARING THE DISHWASHER
INSTALLING THE DISHWASHER
FOR INSTALLATION
IN CUPBOARD
the dishwasher
1
Lay
2
Adjust
as
the
legs
on
its back.
Before
sliding the dishwasher into the
cupboard opening, all necessary height and
balancing adjustments should be made
using a spanner.
1
to the
shown in below
required height
figure.
2
Slide the dishwasher into the cabinet
opening carefully.
Make
sure
that the
drain hose inside the cabinet is not
kinked
or
stretched.
CAUTION
If the
height
you should
unscrewing
6
of the
cupboard
is below 850mm,
the top table by
the 2 screws. (Two of rear)
remove
INSTALLATION INSTRUCTIONS
Step5:
DRAIN LINE CONNECTION
1
If the end of drain hose does not fit to
the drain line,
use a
connector(not supplied)
resistant to heat and
2
or
to a
separate standpipe, it is essential that
that is
airtight
an
connection be made.
Refer to
detergent.
This should be available from
plumbing shop
■ When the drain hose is connected
rubber
Fig.B
a
DIY merchants.
There are two typical connections
shown in Figure A, B.
as
The "S" trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
To prevent siphoning, one of the
methods must be used:
following
■ When the drain hose is connected
to a
sink "s" trap or waste disposal unit, the
hose must be looped up to the underside
Fig.
B
:
Drainage
connection
-
stand
pipe.
of the bench top and secured.
Drain hose Extension
Extend drain hose
Fig.
as
shown below.
A
CAUTION
When you connect or extend drain hose,
make sure that drain hose is not kinked.
(Bends should have a 40 mm radius.)
7
INSTALLATION INSTRUCTIONS
Step6:
Step8:
WATER SUPPLY CONNECTION
HOW TO LEVEL THE DISHWASHER
1
Connect the water
of
supply hose
to the
shown.(Some models
tap
inlet valve and hose.)
water
an
as
After
consist
when you open or close the door. If this does
happen you need to adjust the level of the
This dishwasher may be fed with either
hot or cold water. If the water can not be
dishwasher.
maintained below 65ºC, the dishwasher
must be connected to cold water.
2
installing the dishwasher, you may notice
slight sticking of the door to the dishwasher,
a
Case 1. In
case
the door is slanted to the
right
connecting, the sealant tape or
sealing compound to avoid water leaks.
When
Make
sure
sharply
that the line is not kinked
or
bent.
Fig. C
?
Water tap
If the door slants to the
right,
see
fig,
C and
follow these instructions:
1) Unscrew(counter-clockwise)
the left
leg
of
the back side and correct the level.
2) Check
the
opening
of door and repeat if
necessary until the door opens and closes
Water
hose
supply
?
properly.
product
When the
should be
Case 2. In
no
slant
case
is
correctly leveled,
stickiness
,
or
There
friction sound.
the door is slanted to the left
Step7:
FINAL CHECK AND ASSEMBLING
1
Securely hand tighten supply hose to the
supply.
Plug the power supply cord into an
earthed electrical point and switch on.
water
2
Fig.
?
After
installing and prior to using the
dishwasher with crockery, we
stage it is useful
see
fig.
D and
of door if there still
remains
sticky or friction sound.
the
Check
2)
opening of door and repeat if
to ensure that there are
necessary until the door opens and closes
operating problems or water leaks.
When the dishwasher is used for the first,
there may be a loud noise, if this
happens,
If the door slants to the left,
follow these instructions:
1) Check the opening
recommend that you use the dishwasher
on 'Quick' mode to rinse through. At this
no
D
?
properly.
product
When the
should be
turn off the power and restart
sound.
the dishwasher.
8
no
slant
is
,
correctly leveled,
stickiness
or
There
friction
PARTS NAME
1. Control Panel
10.
Adjust Leg
2. Door Handle
11.
Upper
12.
Cutlery
13.
Detergent
3. Front Cover
4. Lower Cover
5. Process Monitor
6. Power Switch
Rack
Basket
And Rinse Aid
14.
Vapor
15.
Upper Spray
16. Lower
Vent Cover
Spray
Arm
Arm
7. Drain Hose
17. Filter ASM
8. Inlet Hose
18. Lower Rack
9. Power Cord
19. Salt Container
Funnel
※ The appearance and
specifications
may vary without notice.
9
Cap
Dispenser
FUNCTION OF CONTROL BUTTON
TRIPLE SPRAY
?
With each press, the level
of water jet is changed to
Strong,
in
a
RINSE
?
Rinse button will select
Normal and Soft
sequence.
Repeated pressing of the
Extra
?
Hot, Rinse+.
If you select the Extra
Hot function, the
operationg temperature
will be up
to
80℃.
(Intensive, Auto, Eco)
?
When you select Rinse +
an additional rinse cycle is
,
added.
10
INDICATOR
?
Refill with
Before
?
?
Refill with
starting, the display window shows the running time of
the selected program.
After starting, the display window shows the
special salt
?
DELAY START
TIME LEFT
If the dishwasher has
?
a
remaining time.
?
Child Lock
Pressing the Delay Start
will increase time by 1
hour.
If this
※"
PROGRAM
error
"
:
letters
No
are
error
message
(See page 19)
CHILD LOCK
?
Used to lock
or
unlock the
control buttons to prevent
all the setting from being
each button.
changed by
?
?
a
BEEP ON/OFF
?
The dishwasher must be
switched
?
child.
The
can
?
on.
beep on/off function
pressing the
?
be set by
automatically canceled
button
when power failure occur.
For locking/ unlocking,
a
seconds
POWER
a
"on" will appear in the
time display.
?
The
is
simultaneously.
on/off function
beep
automatically canceled
when power failure
11
occur.
automatically
safety and
energy saving.
In case of irregular surge
switches off for
simultaneously for
few seconds. Then,
operating, press this
button first for power on.
After operating, this
For
button
Intensive and Pre-wash
This function is
press Intensive and
Auto button for a few
delay start time can be
adjusted from 1 hour to 19
The
hours.
displayed, please refer to the trouble
22
shooting guide page and follow the guide.
When you want to
select program, press
delay the
press this button before
pressing program button.
trouble, the trouble type is displayed.
?
?
If you want to
start of selected program,
rinse aid
?
?
?
disturbance to the
the power may
automatically turned off
machine,
be
for
safety.
HOW TO USE AND OPERATE
1.
Loading your
Take care not to obstruct the rotation
of the spray arms and ensure that large
items do not prevent the detergent
dispenser lid from opening.
Dishwasher
For better
washing performance, always load
according to the instructions.
Before loading items into the dishwasher
clean off large particles of food, in particular
insoluble items such as bones, pips, etc.
the dishwasher
When
loading
accordingly:
the dishwasher,
please
3.
Cutlery
act
nesting
■ Position crockery such that
water will
angle help
properly.
to
water
■ Items with burnt
2.
prior
to
Loading
run
on
off and
Basket
cutlery
basket to prevent
of similar items. Place the
cover
cutlery
with the handles down. The
at an
dry
in the top of the dishwasher.
Take
in the dishwasher.
care
sharp
when
loading
and
unloading
items.
the Lower Rack
The lower basket is best loaded with dinner
plates,
and
soup bowls, dishes, pots, pans, lids
the grill tray.
even
Plates should be
positioned upright
and
facing the centre of the rack and pots, pans
and large dishes must be turned upside
down.
Dinner
plates
Soup plates
4
3
2
2
3
6
4
3
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
4
3
2
4
3
4
12
2
4
2
Dessert Plates
2
4
3
4
123456
7
4
5
3
3
Soup plates
in
cover
be hinged and clipped away from the
basket if you choose not to use them.
Place knives in the separate rack for located
food should be
loading
Cutlery
can
contact all surfaces.
■ Deep based items should be placed
the
should be mixed within each
section of the
the
soaked
Using
5
2
3
4
3
4
7
2
3
4
HOW TO USE AND OPERATE
4.
Loading
the
Upper Rack
It is best to load this with
items such as, small
5.
delicate
more
plate
plates, long cutlery,
bottom
facing
levers
positioned
down
Take
spray
care
arm
for
long
lower
under the upper rack.
After
Bowl(L)
adjusting
that the spray
Knives
Glasses
Saucers
Bowl(S)
move
possible
the
upward,
hold
the rack
arm
levels, check
is free to rotate.
Cups
Front
Non Dishwasher Safe Items
The combination of high water temperatures and
dishwasher detergent may damage particular
items, therefore
dishwasher
to
we
do not recommend
wash the
using
the
following:
Copper or anodized aluminum
Hand painted silver or gold leaf crockery
Wood
Iron
or
WARNING
bone handled utensils
or non
rust
Before
Plastic items that which
are
not
adjusting,
ensure
the rack is
empty of all crockery.
Otherwise crockery may be
proof utensils
dishwasher safe.
or
13
you may be
it
position.
the middle location of the upper rack
marked position)
(
not to obstruct the rotation of the
Bowl(M)
either side of the rack to
upper rack remains level.
And when you pull the rack
glasses.
stem
on
to its
We recommend that where
Extra cups or cooking utensils can be laid
on the fold down cup racks, which also
provides support
Rack
adjusting, ensure that the rack is empty.
can change the position of the upper
rack by lifting the rack upward, into the
upper position, or by pulling on the two
the front of the
and bowls must be
Upper
You
rack.
Cups, glasses
upside down.
the
Your upper rack can be raised or lowered to
cater for different sized crockery. Before
cups, glasses and dishwasher safe plastic
items. Plates should be positioned upwards
with the
Adjusting
injured.
damaged
HOW TO USE AND OPERATE
6.
?
Adding Detergent
Dispenser
Push latch to open
Detergent must be put into the detergent
chamber before starting every program
except the Pre-Wash.
?
?
Please follow the manufacturer's instructions
within the manual, when determining the
correct amount of detergent to use.
Place proper
detergent into this
If your dishes
compartment
slightly
use
moderately dirty, you may
detergent than
are
less
recommended.
?
?
Chambers hold
15g and 25g.
The amount of detergent required depends on
the program. Please refer to the guide table.
PROGRAM
AMOUNT OF DETERGENT
Intensive
25g
WARNING
The
detergent used is a special
detergent and like all
Auto
20g
Dishwasher
Eco
15g
treated
Quick
10g
household chemicals it should be
Pre-wash
?
After the
No
detergent
is
kept out of reach
of children. After completion of the wash
program, the detergent compartment
should be checked and any remaining
detergent removed.
detergent
supplied,
as
harmful and
the
chamber lid should be closed.
?
?
The
WARNING
is
detergent dispensed automatically
during the operation.
# Attention
Using combined detergent
products(ex.3 in 1)
Some products integrated rinse aid work
best specific programs only.
You will obtain optimum rinsing and
drying results by using conventional and
The chamber lid remains open after
operation.
Detergent
Use
only
the
Information
separate salt and rinse aid.
detergent
intended for
household dishwashers.
washing detergent
because the foam
:
(Ordinary
Products that
hand-
can
hardness range.
Please contact the
manufacturer if the
should not be used,
can
replace regeneration salt
only be used within a specific water
interfere with proper
operation.)
detergent
drying performance
is very poor or you find the white film,
when you use the combined detergent
products.
We do not warrant the
directly related
products.
are
14
complaints
that
to the use of these
HOW TO USE AND OPERATE
7.
Adding Rinse
Dispenser
?
For
Aid
filling
To fill the Rinse Aid
chamber,
rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with
a
good quality
and lock the cap.
The Rinse Aid is
during
The
Rinse Aid, then
replace
automatically dispensed
cycle.
the final rinse
dosage
is
set to suit most
factory
installations. If, after
cloudy spots, streaks
washing,
or
you notice
water marks
on
your glassware, it may be necessary to
increase the setting. To do this, remove the
cap and rotate the indicator
arrow to a
higher setting then replace the cap If the
glasses are smeared or foam is present on
the bottom of the glass or the bottom of the
machine, select a lower setting.
.
?
For
refilling
Depending
on
the
dosage setting
and the
number of washes, the chamber may need
to be topped up, approximately once a
month. The rinse aid level
can
be checked
two methods.
by
By
?
the indicator window
on
the
when the dishwasher door is
dispenser
fully open.
Rinse Aid Information
Black indicates sufficient Rinse Aid
O
?
Clear indicates Rinse Aid
By
the
light
on
lit, when the dishwasher
When the
lamp
required
panel, being
is working on.
Rinse Aid is necessary to remove spots and
streaks from dishes as well as improved
the control
is
lit,
it
means
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
the rinse aid
is almost empty. Refill the Rinse Aid
chamber as soon as possible.
15
HOW TO USE AND OPERATE
8. Salt
Filling
This model has
a
water softener to soften hard water.
Please read these notes
carefully
for correct
operation.
In order to
or no
provide satisfactory rinsing results, the dishwasher requires soft water, i.e.,containing little
lime, otherwise water stains will be left behind on the dishes and interior containers.
If the tap water exceeds a certain level of hardness, it must be softened, i.e.,decalcified.
This is achieved by adding a special salt to the water softener inside the dishwasher.
The
?
required
?
according
Check the water hardness of your area.
Set the water hardness according to the
?
Remove lower rack and
?
Before
Use
a
how hard your tap water is.
to
with Salt for the first time
Filling
?
amount of salt is set up
(Your
water
setting
supplier
will be able to tell you
this.)
method of the water softener.
unscrew the cap of salt container.
for the first time, fill with salt, the container has a capacity of 1.9kg.
dishwasher
using your
funnel for ease and clean filling, ensuring that coarse salt or regenerating salt intended for
dishwashers is used.
?
?
After
?
Screw the cap
filling, wipe off any spilled salt to seal the cap properly.
tightly to prevent any suds from penetrating into
Setting
up the water
the container.
softening system
setting to the corresponding hardness of the
adjustment levels.
The dishwasher is programmed at the factory for a water hardness level of
This can be checked and altered by using the buttons on the control panel.
Adjust
the water softener to the
water in your
water softener has 8
"
1. First,
ensure
the dishwasher is switched off.
Delay Start and Power button simultaneously and keep them pressed.
A"
and 1 figure will appear in the time display.
To change the setting:
Simply press the Quick button and the figure will change one by one.
The display will change between
and"
".
2. Press
"
3.
".
"
"
4. Once the hardness
The hardness
setting is correctly adjusted,
setting is then saved.
16
press the Pre-wash button.
area.
The
HOW TO USE AND OPERATE
■ For
refilling
When the salt container is empty, the salt refill lamp will automatically turn on during operation.
The salt should be refilled after the cycle has finished. We recommended the salt refill should
always be carried out, as mentioned previous page, prior to starting
immediately thin and drain away any excess salt solution.
When the
lamp
is
lit, this
means
the next
operation.
This will
that the salt
aid is almost empty. Refill the Salt Aid
chamber as soon as possible.
Note
?
After
filling with salt, it may take a little while before the indicator light turns off.
When the control is set to
", it is not necessary to fill up with salt as no salt is consumed while the dishwasher is
"
?
If the control is set between
"
"and"
", then salt must be added to the dispenser.
WARNING
Do not pour
detergent
into the salt container. This will
9. Fold down dividers
Fold-down dividers at the lower and the
upper rack can be lowered to
stacking of pots and pans.
improve
17
destroy the
water softener.
operating.
HOW TO USE AND OPERATE
10. Removable Rack
12.
Separable
A removable rack at the lower rack is
Slide two baskets in
detachable for
then
loading
pots and pans.
pull
basket
opposite directions,
them apart.
①
②
②
①
11. Glass
13.
supporter
Drying
To assist
A
glass supporter can be folded down to
arrange glasses and cups easily on the
door be
drying, we recommend that
fully opened after the cycle.
the
upper rack.
14.
?
?
?
?
?
?
18
Energy Test(EN50242)
Appliance loaded in accordance with
standard specifications.
Example of loaded dishwasher : p.12~13
Capacity : 12 place settings
Comparability course : Eco
Rinse Aid setting : 3
Reference cleaner : 6g of detergent onto
the inside surface of the door and fill 24g
into the detergent dispenser.
Height-adjustable Rack-U must be
inserted into the uppermost position.
OPERATING SEQUENCE
Before
starting, the display window shows
running time of the selected program.
After starting, the display window shows
the remaining time.
The time in the display window will start
to decrease minute by minute.
If the door is opened during the program a
safety device ensures that the machine
Press the "Power" button
the
Check there is rinse aid
and salt
The
corresponding
indicator
illuminate if refilling is
Open
lights
required.
will
stops.
the door and check
Once the door is re-closed the program
will start from where it
the filters
Ensure
they are
positioned (See
Instructions").
clean and
At the end of the
properly
"User Maintenance
Load the dishes
and
"is
a
"
"
Cool
etc.
dry"
more
dry-"Cd"
minutes to diminish any
If you want, you
the dishwasher.
can now
Otherwise the dishwasher
Ensure the spray
switches off for
arms can
detergent
Add the
required amount of detergent
dispenser and close the lid.
and
starting
safety
open and unload
automatically
saving
and energy
later.
rotate
Measure out
remaining
moisture.
Do not load the items in upper rack with
the lower rack is pulled out and loaded.
Setting
mode.
This process is not part of the program.
At this time, the fan will operate for a few
CAUTION
the
digital display
display then
to indicate that the
dishwasher is in "Cool
Pull the upper rack out and arrange the
freely
washing
the
displayed on
buzzer sounds. The
shows
Remove any excess food.
Pull the lower rack out and arrange the
dishes and cutlery.
glasses,
interrupted.
program
"
cups,
was
CAUTION
the lower rack first and then the upper
This will avoid water dripping from the
upper rack onto the dishes below.
into
Empty
one.
the
WARNING
program
In
general it is not advisable to open the door
while the machine is working.
If the door is opened, a safety device
Press the program button to select the
desired program.
After 3 seconds, the machine will start.
If necessary, select the option function
that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after a
program has finished, as steam may escape.
ensures
corresponding to the desired program.
The indicator lights of the program and all
the phases of the program will come on.
19
PROGRAM
▶Running
▶Running
time may vary according to the water temperature, water pressure and
time doesn't include "Cool dry 60 min".
voltage.
-
WASH
Program
Pre Wash
Main
Wash
50
RINSE
Rinse 1
Rinse 2
DRY
Heating
Rinse 3
Rinse
70
Cool
dry
70
Intensive
Auto
The program sequence is optimized and adapted in accordance
with how dirty the dishes are.
45
65
35
40
Eco
Quick
Pre-wash
Intensive Wash
Eco Wash
This program is ideal for very dirty
crockery, in particular pots, pans and
This program offers the most efficient
energy and water consumption for a good
casserole dishes.
washing performance.
It is recommended
that it will be used every time.
Auto Wash
During the Auto program, the degree of
soiling in the dishes is determined by the
amount of clouding of the water.
According the degree of soiling, the
program automatically adjust the washing
time, temperature. As
a
Quick Wash
Can
result, the energy
consumption is kept as low as
The
"F" on display means that
possible.
the sensor is sensing the status of the
Can
※
Auto Restart
dry"
is not part of the
lightly
cutlery.
use
soiled
recently used
this program for only removing
washing dishes by hand.
soil before
dishwasher.
"Cool
for
Pre-wash
and water
※
use
dishes and
operating program.(See page 19)
If the dishwasher is turned off by a power failure, it will restart
the position it stopped at adjusting accordingly.
automatically from
20
USER MAINTENANCE INSTRUCTIONS
To prevent trouble and poor
at regular intervals.
operating,
it is
important
to check filters and spray
arms
Upper Spray Arm
Filters
?
Remove the lower rack first.
?
?
Turn the mesh filter counterclockwise.
?
?
Take out the mesh filter, upper STS filter
and outer filter.
?
?
Pull the upper rack forwards.
Check that the water jet holes
?
Clean them if necessary.
Replace them in the reverse order.
?
If cleaning is required,
unscrewing the nut.
Clean the spray
order.
arm
reverse
mesh filter
upper STS filter
Upper spray
outer filter
Lower
?
Spray Arm
Check that the water jet holes
are
not
blocked.
?
If cleaning
pulling up.
is
?
Clean the spray
down.
required,
arm
remove
and
the
replace
it
arm
are
not
blocked.
by
pulling
21
arm
remove
and
the
replace
arm
by
it in the
TROUBLE SHOOTING GUIDE
If
problem occurs check
In the unlikely event that
service engineer.
a
lights
when the
come on
power is turned
Water is not
(The display
display
(Automatically
pumped
show
"
shows
"
"
Drain
The
display
shows
display
shows
"
"
"
"
The
?
Door is not
?
The start button is not
?
The drain hose is kinked.
code.)
?
The filter is
code.
?
Excessive water is
supplied than
?
There is
with the inlet valve.
?
Water is not
?
Water is
leaking
?
Damage
to the unit has been caused
?
The water heater circuit is
?
The
?
The amount of
?
The salt container is empty.
The salt container cap is not
code.
code.
code.
do not rotate
arms
smoothly.
deposits
are
dish washer after
left
on
the
washing.
?
are
left
on
results
are
not
Streaks
Dry
Washing results
satisfactory.
glassware.
satisfactory.
are
not
"code.
a
of the house
fully
tripped.
cut
was
off.
closed.
pressed.
clogged. (Clean
problem
the
filter.)
supplied. (Water tap
the normal water level.
is not
opened.)
from the Hose connections.
by
a
water leak.
damaged.
mounting of the spray arms is blocked by
particles. (Clean the holes of the spray arm.)
detergent
or
rinse-aid set
securely
?
Too little Rinse-Aid
dispensed.
?
Incorrect amount of
?
"
electricity
circuit breaker
dispensed.
?
shows
or
Too little Rinse-Aid
?
display
properly
?
?
The
contact a
inserted into the socket.
Fuse blown
"
"
is not
?
Pump operated.)
shows
White
rectified, please
Plug
away.
"
display
The spray
cannot be
problem
be solved.
can
?
on.
The
The
whether this
?
The machine does not start.
The
the
see
Possible Causes
Problem
No
below to
incorrectly.
screwed
detergent.
incorrectly arranged or overloaded.
Filters are clogged.
Water jet holes of spray arms blocked.
Spray arms' rotation obstructed by utensils.
Utensils
?
Unsuitable program selected.
?
No
error
message.(See page 19.)
22
food
on.
MEMO
23
LD-2160(3)W(S,M,L,T)H
LD-2160(3)W(S,M,L)HB
LD-2160(3)W(S,M,L,T)HU
Capacity
12 Place
Weight
See
rating
label
Power
Supply
See
rating
label
Power
Consumption
See
rating
label
Water Feed Pressure
P/No.: 3828DD3006P
settings
50~800kPa
Download PDF