LG | L3200TF | LG L3200TF Owner’s Manual

Table of Contents
Installation
and
Connection
Safety
A1
Precautions
Accessories
A4
Using the Remote Control
A5
To arrange cables in order
Connecting
the
A12
Optional
-
A13
Speakers Optional
-
A14
Name and Function of the Parts
Connecting
to your PC
A15
Watching
the VCR/DVD
A17
Watching
the
HDTV(720p/1080i)
A18
Watching
the
DVD(480i)
A19
Connecting
Watching
and
Tracking
Selecting
How to
to
DVI-D(HDCP)
from the
VCR/DVD/Set-top
Box
A21
AV
A22
and
Outputs
Adjusting the Screen
A23
dajust the OSD(On Screen Display) Screen
Set/Selects the channel when
using
the
TV(Optional)
A26
A27
Adjusting
Screen Color
A29
Adjusting
the audio function
A30
Adjusting
the timer function
A31
Selecting
the
A32
Adjusting
Screen CLOCK/PHASE and Position
Adjusting
PIP/POP/PBP Mode
Controlling
the
Options
(Multiple Screen)
A34
Functions
Multiple Products (RS-232C protocol)
A35
A37
A48
IR Codes
Miscellaneous
A20
the TV
Connecting
Selection
A15~
the External Devices
Connecting
Input
0
Troubleshooting
A50
Specifications
A53
trademark of SRS Labs,Inc.
technology is incorporated under license from SRS Labs,Inc.
is
a
i
ENGLISH
Precautions
Safety
Please read these
safety precautions carefully
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
ignore the caution message, you may
Precautions in
installing
be
before
using
seriously injured
slightly injured
or
the
or
the
there is
product.
a
possibility of
product may be damaged
the Product
Warning
Keep away from heat sources like electrical heaters.
-
Electrical shock, fire, malfunction
or
deformation may
Keep the packing anti-moisture material
-
occur.
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
put heavy objects on the product or sit upon it.
If the product collapses or is dropped, you may be injured. Children
Do not
-
must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the
-
Dust
or
product
moisture
in
a
neat and
can cause
If you can smell smoke
service center.
-
If you continue to
use
If you dropped the
If you continue to
-
or
or
injury.
dry place.
electrical shock, fire
other odors
or
hear
or
a
product damage.
strange sound unplug the power cord and
without taking proper measures, electrical shock
or
fire
contact the
can occur.
product or the case is broken, turn off the product and unplug the power cord.
use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
Do not
drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
-
contact the service center.
Caution
product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Make
sure
the
-
Do not block the ventilation hole of the
-
The
product can
product by a tablecloth or curtain.
be deformed or fire can break out due to overheating inside the product.
Install the
-
producton a flat and stable place that has no risk of dropping the product.
If the product is dropped, you may be injured or the product may be broken.
Install the
product where
no
EMI
occurs.
Keep the product away from direct sunlight.
The product can be damaged.
-
A1
Electrical Power Related Precautions
ENGLISH
Warning
Make
-
to connect the power cable to the
You may be electrocuted or injured.
sure
grounded
current.
Use the rated
-
voltage only.
The product can be damaged,
During
-
a
thunder
or
or
you may be electrocuted.
lightning storm, unplug the power cable or signal cable.
You may be electrocuted
or a
fire
can
break out.
Do not connect several extension
cords, electrical appliances or electrical heaters to
power bar with a grounding terminal designed for exclusive use with the computer.
A fire can break out due to overheating.
a
single outlet. Use a
-
Do not touch the power plug with wet hands.
the power plug completely or wipe dust off.
-
You may be electrocuted due to
excess
Additionally,
it the cord
pin is wet or covered with dust, dry
moisture.
If you don't intend to use the product for a long time, unplug the power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
a
fire
can
break out.
Hold the
plug when pulling out the power cable. Do not bend the power cord
heavy objects on the power cord.
The power line can be damaged, which may cause electric shock or fire.
with excessive force
or
put
-
Do not insert
(like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
-
a
conductor
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the product is
Electrical shock can damage the product.
Precautions in
Moving
in
use.
the Product
Warning
Make
-
Make
-
to turn off the
product.
You may be electrocuted or the product can be damaged.
sure
moving the product.
You may be electrocuted or the product can be damaged.
sure
to
remove
all cables before
A2
Precautions
Safety
Caution
product when moving it.
You may be electrocuted or the product can be damaged
Do not shock the
-
Do not
dispose the product-packing box. Use
it when you
move.
panel face forward and hold it with both hands to move.
If you drop the product, the damaged product can cause electric shock or fire. Contact with the service
repair.
Make the
-
Precautions in
Using
center for
the Product
Warning
Do not
-
-
Fire
disassemble, repair or modify the product at your
or
electric shock accident
discretion.
own
can occur.
Contact the service center for check, calibration
Do not spray water on the product
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene). Fire or
Keep the product away from water.
-
Fire
or
electric shock accident
can occur.
Caution
Do not
-
store inflammable substances
the
product.
There is a danger of explosion or fire due careless handling of the inflammable substances.
put
or
near
cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
The water can sink into the product, which can cause electric shock or serious malfunction.
When
-
Take
a
rest from time to time to
Keep the product clean
protect your vision.
at all times.
position when working with
Take
a
comfortable and natural
Take
a
regular break when working with
Do not press
scratch on it.
a
strongly upon the panel with
a
product to relax the muscles.
product for a long time.
a
hand
or
sharp object such
as
nail, pencil
or
pen,
or
make
Keep proper distance from the product.
Your vision may be impaired if you look at the product too closely.
-
Set the appropriate resolution and clock by referring to the User's Guide.
Your vision can be impaired.
-
Use authorized
-
Product
On
can
detergent only when cleaning the product. (Do
not
use
benzene, thinner or alcohol.)
be deformed.
Disposal
lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
The fluorescent
A3
a
Accessories
Please check the accessories in the
*
The
product
and the accessories
product package.
be different from the
can
Free Mount
Desktop Stand Type
figures
shown here.
ENGLISH
Type
OR
ON/ OFF
Product
Remote Control/
Batteries
User's Guide/
15-pin D-Sub Signal
Driver CD/Cards
Cable
Audio Cable
Power Cord
DVI-D
Signal Cable
RCA-PC
(PC)
Audio Cable
Speaker
Optional
kit / Screws
(Applicable only for models
that support the
Wall-mount Rack
Please refer to the enclosed "Installation Guide" when
installing the wall-mount rack.
Inserting
batteries into remote control.
1. Take out the
battery cap.
2. Insert batteries with correct
3. Close the
?
You
battery cap.
can use a
and 30
polarity (+/-).
remote control 7 meter distance
degree (left/right)
within the
receiving
scope.
?
Dispose of used batteries in the recycle bin
prevent environmental pollution.
A4
to
unit
speakers)
the
Remote
Control
Using
Name of the Remote Control Buttons
Remote Control
MUTE
POWER
MENU
Use this button to enter the On Screen
Display menu.
EXIT
Use this button to exit the On Screen
*/SSM
Display
(Sound Status Memory)
Use this button to select the sound tone.
Press
repeatedly to select Flat, Music, Movie,
Speech, User sound tone.
A5
menu.
Name of the Remote Control Buttons
Remote Control
SOURCE
If you press the button once,
the following Input Signal
Window will appear. Select the
signal type you want using the
button.
TV/AV
TV/AV button
:
TV
I/II
:
AV
>
>
S-Video
Bilingual choice
(TV only)
>
Component 1
>
Component 2
and sound mode selection
Press this button
to switch from Stereo to Mono sound in case of
stereo transmission, or from Nicam Stereo to
Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or
Nicam Dual I+II in
transmission.
of Nicam Dual
case
to choose between Dual
I, Dual II
or
Dual I+II in
of bilingual transmission :
Dual I sends the primary broadcast language to
the loudspeakers ;
Dual II sends the secondary broadcast language
to the loudspeakers ;
Dual I+II sends a separate language to each
case
loudspeakers.
Sound output selection (AV, RGB, DVI only)
In AV, RGB, DVI mode, you can select output
sound for the left and right loudspeakers.
Repeatedly
press the I/II button to select the
sound output.
L+R : Audio signal from audio L input is
sent to the left loud speaker and
audio signal from audio R input is
sent to the right loud speaker.
L+L : Audio signal from audio L input is
sent to left and right loud-peakers.
R+R : Audio signal from audio R input
is sent to left and right loud-speakers.
NOTE
signals, with
Nicam stereo transmission, select mono reception.
:
In
A6
case
of weak stereo sound
stereo or
ENGLISH
the
Remote
Control
Using
Remote Control
PR
(
VOL
)
(
Buttons
)
Buttons
OK Button
Number buttons
AUTO Button
?This function is to
automatically search the
available channels. It is available to the TV
signal
inputs only.
?This function is to
automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode). It is
available to the PC analog signal input only.
SWAP function
To switch the main-screen and sub-screen in
PIP/POP/PBP mode.
A7
ENGLISH
SLEEP
You
SLEEP Timer
:
period after which the
TV / AV / S-Video / Component 1/ Component 2
should switch itself to standby. Press the key repeatedly
can
set a time
to select the number of minutes.
LIST
To
Programme list
display the programme
:
list
(0~99).
Note: TV channels
setup
to
displayed in blue have been
be skipped in the Programme Edit
menu
Q.VIEW
*
*
QUICK VIEW Button (See page A28)
Favourite Program On : Rotate Favourite channel.
:
Favourite
Program Off
:
To
display the previously
selected TV channel.
APC / PSM
repeatedly to select Dynamic, Standard, Mild, Game
User picture mode. This function is not supported in PC
Press
or
mode.
A8
the
Remote
Control
Using
Remote Control
-
PIP/POP/PBP function
1.
:
PIP
in
Picture)
The sub-screen is
changed
(Picture
SMALL
->
MEDIUM
2. POP (Picture
The sub-screen
this button.
:
POP ON
->
->
out
in the order shown below.
LARGE
Picture)
moves
PBP(FULL)
OFF
Button
to the next mode whenever you press
->
PBP(4:3)
PBP
POP ON
->
->
OFF
(FULL)
PBP
(4:3)
3. SWAP Button
You
swap the main screen and the sub-screen when the
PIP/POP/PBP function is used.
can
PIP
SWAP
POP
SWAP
PBP
<Table of PIP/POP/PBP Function
Support>
'Input Signal 1' comes on in the main
screen, only 'Input Signal 2' can be
displayed on the sub-screen. On the
contrary, if the main screen displays 'Input
Signal 2', the sub-screen can display 'Input
Signal 1' only. You can swap 'Input Signal
1' and 'Input Signal 2' using the SWAP
When
button.
*PIP function is not
and 1080i modes.
A9
supported
in
480i, 576i
Remote Control
-
Using the Teletext function
TEXT
To select the teletext
page
off. The main index
the last selected page appears on the
together with an information headline and
or
screen
an
on or
option
line at the bottom of the
screen.
UPDATE
Press the button to appear the TV programme.
At the top of screen indicates that you are still in
the teletext mode. Before
interrupting teletext,
you
may select a page number. When the page has
been found, the information line appears briefly on
your screen. Press the button again to reappear
teletext.
SIZE
Press the button
repeatedly to display the
upper
part, the lower part and then to return to the
normal page size.
HOLD
Press the button to stop the automatically rotating
of the subpages. Press the button again to
continue the automatic
rotating again.
INDEX
To
display the
A10
main index.
ENGLISH
the
Remote
Control
Using
Remote Control
-
Using the Teletext function
MODE
The mode will be switched in the Teletext
mode.
TIME
press this button to select a sub page number.
The sub page number is displayed at the
bottom of the
screen.
To hold
or
change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
REVEAL
Press the button to reveal/conceal the hidden
information, such
puzzles.
as
Press this button
information from the
A11
solutions to riddles and
again
display.
to remove the
To arrange cables in order
*
Applicable only for
-
Optional
models that support the stand
1. Disassemble the stand cover. The cover may be easily disassembled
down
on
the base
as
shown in the
Stand
figure.
cover
2. After connecting the cables,
stand. If
by pressing
securely connected,
correctly position
the stand
cover
you will hear the latch click into
A12
into the holes
place.
on
the
ENGLISH
the
Connecting
*
Use the
screws
in the below
to secure the
Speakers Optional
-
Applicable only
speakers
on
the
for models that support the
rear
side of the
product
as
speakers
shown
figure.
When the
A13
speaker
is installed.
Name and Function of the Parts
Rear View
Back
-
DVI
Power Connector
:
IN(HDCP)
RGB IN
Cap
Open the back cap before
you install the product.
AUDIO IN
Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
PC
Signal Inputs
PC Sound Jack
: Connect the audio cable to the *LINE OUT
AV
Input
jack of the
PC sound card.
Ports
TV Tuner Jack
:
Connect the antenna.
*LINE OUT
A terminal used to connect to the
the
connecting
speaker including
only Speaker Out,
If the Audio Out of the PC sound card
the card
built-in
terminal of the PC sound card is checked
PC sound card has
using
a
jumper of the
program
amplifier (Amp). Make sure that
before connecting. If the Audio Out of
reduce the PC volume.
supports both Speaker Out and Line Out,
(Refer to the Sound Card Manual).
A14
convert to Line Out
ENGLISH
Connecting
First of all,
Then,
see
if the
connect the
to your PC
PC, product and the peripherals
signal input
are
turned off.
cable.
A
When
connecting
with the DVI
B
When
connecting
with the D-Sub
signal input cable. (IBM compatible PC)
C
When
connecting
with the D-Sub
signal input cable. (Macintosh)
signal input cable.
Rear side of the
product.
A
PC
B
PC
C
MAC
Macintosh
Adapter (not included)
Use the standard Macintosh
adaptor is available
in the market.
Connect the power cord.
Rear side of the
*
When
adapter since
product.
connecting to a
wall outlet.
A15
an
incompatible
(Different signaling system)
A
Turn on power
by pressing
the power button
on
the
product.
ENGLISH
Power button
B Turn
Select
an
the PC.
on
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
with
A When connecting
?
Select DVI PC
B When connecting
?
:
?
Note
:
at the front side of the
product.
signal input cable.
DIGITAL signal.
D-Sub signal input cable.
15-pin D-Sub ANALOG signal.
a
How to connect to two
computers.
Connect the signal cables (DVI and D-Sub)
Press the SOURCE button in
?
input signal.
DVI-D
DVI-D
with
Select RGB PC
a
the remote control to select the
a
to each
remote control to
computer.
select the computer to
Directly connect to a grounded power outlet on the wall
wire.
A16
or a
use.
power bar with
a
ground
the
VCR/DVD
Watching
Connect the video cable
cord
A
(See
page
as
shown in the below
A15).
connecting with a RCA cable.
Connect the input terminal with a proper color match.
(Video Yellow, Sound (left) White, Sound (right)
When
?
--
B
and then connect the power
figure
When
?
--
connecting
with
a
Connect to the S-Video
Red)
--
S-Video cable.
input terminal
to watch
high image quality
movies.
Product
Red
Yel ow White
RCA Cable
(not included)
S-Video Cable
(not included)
Y
W
R
VCR/DVD Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
at the front side of the
with
an
RCA cable.
with
an
S-Video cable.
Select AV.
When
?
connecting
the remote control to select the
connecting
Select S-Video.
A17
product.
input signal.
the HDTV(720p/1080i)
Watching
Connect the video/audio cable
power cord
?
(See
Connect the
page
as
shown in the below
figure
and then, connect the
A15).
input terminal with
a
ENGLISH
proper color match.
Product
Gre n
Blue
Red
White
Red
(Compnetabl noticlude)
Gre n
AudioCable (noticlude)
Blue
Red
White
Red
HDTV Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
.?
the remote control to select the
at the front side of the
Select Component 1.
A18
product.
input signal.
Watching
Connect the video/audio cable
power cord
?
(See
Connect the
page
as
the DVD (480i)
shown in the below
figure
and then, connect the
A15).
input terminal with
a
proper color match.
Product
Blue
Gre n
Red
White
Red
(Compnetabl noticlude)
Gre n
AudioCable (noticlude)
Blue
Red
White
Red
DVD Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
.?
the remote control to select the
at the front side of the
Select Component 2.
A19
product.
input signal.
to
Connecting
DVI-D(HDCP) from the VCR/DVD/Set-top Box
Connect the video/audio cable
power cord
(See
page
as
shown in the below
figure
and then connect the
ENGLISH
A15).
Product
DVI-D
Signal
RCA-PC
Cable
Audio Cable
VCR/DVD/Set-top Box
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote control to select the
at the front side of the
Select DVI PC.
A20
product.
input signal.
TV
the
Watching
See if the antenna cable is connected at the
then,
connect the power cord
(see
page
rear
side of the
product
and
A15).
Rear Side of the Product
Antenna Cable
(optional)
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote control to select the
at the front side of the
Select TV.
A21
product.
input signal.
Connecting
AV
Connect to the external device if you record the
When you set the input signal of the main
watching to the AV output terminal.
screen as
Outputs
broadcasting.
'AV
(CVBS)',
you
transmit the
can
signal that you're
ENGLISH
Product
Yel ow
White
Red
RCA able (noticlude)
Y
Video/TV/Product
A22
W
R
and
Selecting
the
Screen
Adjusting
Name of the Buttons in the Screen
Adjustment
Unit
?
Power Button
Press this button to turn
the power. Press this button
on
again
to
turn it off.
?
Power Indicator
?
MENU Button
Adjust
lights up green when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
Use this button to show/hide the OSD
(On Screen Display)
menu
screen.
?
OSD Select /
This Indicator
Use this button to select
an
icon
or
adjust the setting
Button
?
Use this button to
directly control
brightness and contrast of the PC signal
(RGBPC/DVIPC).
?
Adjust the volume.
A23
in the OSD
screen.
Name of the Buttons in the Screen
Adjustment
Unit
ENGLISH
[For PC Analog signal]
AUTO/SELECT Button
[Other signals]
?
The current
signal and mode information
will be
SOURCE Button
?
Select the input signal
TV
Television
AV
Composite Video
Separate Video
S-Video
Component 1
Component 2
HDTV
RGB PC
15-pin D-Sub analog signal
DVI digital signal
DVD
DVI PC
?
The unit that receives the
signal from the
A24
remote control.
displayed.
and
Selecting
the
Screen
Adjusting
OSD Menu
Icon
Function
Description
Set/Selects the channel. (available
only
when
watching TV)
STATION
Adjusts
screen
brightness,
contrast and color that you
prefer.
PICTURE
Adjusts
the audio function.
Adjusts
the timer function.
Adjusts
the
screen
status
Adjusts
the
screen
video.
SOUND
TIME
according
to the circumstances.
SPECIAL
SCREEN
Adjusts PIP/POP/PBP
mode function.
PIP/POP/PBP
Note
OSD(On Screen Display)
The OSD function enables you to
adjust the
graphical presentation.
A25
screen
status
conveniently since
it
provides
adjust the OSD (On Screen Display)
How to
screen
ENGLISH
Pops up
the
Move where
you want to
menu
Select a
menu icon
Move where
you want to
adjust
screen
Select a
menu icon
Press the MENU Button, then the main
Use the remote control to
menu
of the OSD appears.
2
To
3
When the icon you want becomes
highlighted, press the OK Button.
4
Use the
adjust the item
5
Accept the changes by pressing the OK Button.
6
Exit the OSD
access a
How to
control,
use
the
Buttons.
Buttons to
by pressing the
to the desired level.
EXIT Button.
adjust the screen automatically
You need to
adjust the screen display when connecting the product to
a new computer or changing the mode. Refer to the following section
to set an optimal product screen.
Press the AUTO/SELECT button
in the
(AUTO button in a remote control)
PC analog signal. Then, an optimal screen status will be
selected that fits into the current mode.
If
Exit from the
adjustment
menu screen.
adjust
?
1
Adjust the status
Save
adjustment is not satisfactory, you need
clock and phase in the OSD menu.
to
adjust
screen
A26
position,
adjust the OSD
screen.
and
Selecting
the
Screen
Adjusting
Set/Selects the channel when
using the TV (Optional)
Auto programme
System
Press the
buttons to select the TV system of the country or part of the
world from where you want to receive the TV channels.
If you want to receive 'SECAM M' channel, change the SYSTEM menu to
'M' before launching an automatic search.
Storage
To select a programe number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If you want to keep the channels 1 to 10 stored earlier, enter programe
number 11. Your TV search for new channels from number 11 onwards.
Start
Press OK button to start automatic
from
programming. all available TV
channels are searched for and stored automatically. To stop auto
programming, press the MENU or EXIT button. When auto programming
is completed, the programme list menu appears.
Manual programme
To
change
the channel.
System
buttons to select the TV system of the country
world from where you want to receive the TV channels.
Storage
Press the
buttons to select the channel number or enter the programe
number with the number buttons in where you want to store channel.
Channel
Press the
Press the
buttons to select C-CH for aerial channels
or
or
part of the
S-CH for cable
channels.If you know the C-(01~69)or S-channel number(01~47),enter
it directly with the digit buttons 0 to 9.
To select the channel reception type. : V/UHF / CABLE
A27
Set/Selects the channel when
Name
To
It
using the TV (Optional)
assigned channel name.
is possible to change the name stored
see
the
to a TV channel which has not
or
numbers
be
can
Press the
given
to the programme numbers 0 to 99.
buttons to
buttons to select
yet
in the memory or to assign a name
been entered. A name with up 5 letters
move cursor
to be
changed.
Press the
->
character.(space, number 0~9,and alphabet A~Z) ->
Press the AUTO/SELECT button (or OK button on the remote control).
Fine
In
case
the
Search
a
of poor reception, you can improve the reception by fine
buttons to fine tune for the best picture and sound.
Use the
direction.
buttons to search next channel backward
or
tuning. Use
foreward
Programme List
To
adjust the List submenu function, Press the OK
Delete
Press the
-> Press the red
button
-->
on
the remote control
buttons to select a TV channel to be deleted.
key on the remote control -> The selected TV
channel number is deleted, all the
following channels
are
shifted up
one
position.
Copy
Press the
buttons to select
a
TV channel to be
Press the green key on the remote control. All
numbers are shifted down one position.
copyed. ->
the following channel
Move
Press the
Press the
buttons to select a channel number to be moved.
yellow key on the remote control. -> Press the
buttons to move the TV channel to the desired channel number. ->
Press the yellow key again to release this function.
Skip
Press the
buttons to select
Press the blue key
displayed in blue.
on
->
channel number to be skipped.
the remote control. The skipped TV channel is
a
->
This function lets you select your favourite
Favourite
programmes directly. (8 channel)
Press the
buttons to select
channel number.
programme
*
Q.VIEW button(remote control)
Rotate Favourite channel.
A28
:
a
ENGLISH
and
Selecting
the
Screen
Adjusting
Adjusting Screen Color
PSM
TV/AV/S-Video/Component
Component 2 input only
The PSM function
automatically adjusts the
screen
1/
image quality
depending on the AV/TV usage environment.
Dynamic : Select this option to display with a sharp image.
Standard : The most general and natural screen display status.
Mild : Select this option to display with a mild image.
Game : Select this option to enjoy dynamic image when playing
User : Select this option to use the user-defined settings.
?
?
?
?
a
game.
?
Contrast
To adjust the contrast of the
screen.
Brightness
To adjust the brightness of the
screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the
cleaness of the
screen.
Tint
To adjust the tint to desired level.
ACC
factory setting color set.
Warm : Slightly reddish white.
Normal : Slightly bluish white.
Cool : Slightly purplish white.
Selecting
?
?
?
a
input is RGB PC(D-Sub analog)/DVI PC(DVI Digital), the adjustable items in the
CSM function are color temp (9300K / 6500K).
If the 'PSM' setting in the PICTURE menu is set to Dynamic, Standard, Mild or Game
the subsequent menus will be automatically set.
If the
Note
A29
Adjusting Screen Color
ENGLISH
RGB PC / DVI PC input only
CSM
?
?
6500K/9300K
Selecting a factory setting color set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
User : Select this option to use
the user-defined settings.
Contrast
To adjust the contrast of the
screen.
Brightness
To adjust the brightness of the
screen.
Red / Green / Blue
Set your
Adjusting
own
color levels.
the audio function
SSM
quality will be selected automatically
depending on the video type that you're currently watching.
The best sound tone
?
Flat
The most
?
commanding
and natural audio.
Music
Select this option to enjoy the original sound when listening
to the music.
?
?
Movie
Select this option to enjoy sublime sound.
Speech
Select this option to watch sports broadcasting.
?
User
Select this option to
Balance
Use this function to balance sound from the left and
AVL
To
SRS WOW
Set the SRS WOW
use
the user-defined audio
settings.
right speakers.
adjust uneven sound volumes across all channels
appropriate level. To use this feature, select ON.
or
signals automatically to the
most
menu on.
The SRS WOW function
plays back the mono or stereo sound input with the dynamic surround
effects. It will provide rich and profound sound tone. If you set the SRS WOW on, user audio
setting can not be adjusted.
Note
When connected to your computer and the 'SSM' setting in the audio menu is
Movie or Speech, the available menus are Balance, AVL and SRS WOW.
A30
one
of
Flat, Music,
and
Selecting
Adjusting
the
Screen
Adjusting
the time function
Clock
If the time is
1)
2)
3)
4)
5)
Off / On Time
the clock is incorrect, reset the clock manually.
Press the MENU button and then use
button to select the TIME
Press the
button and then
use
button to select the Clock
Press the
button and then
use
button to set the
Press the
button and then
use
Press the
button and then
use
Setting
is available, however,
The off timer
1)
2)
3)
4)
5)
6)
7)
Auto
menu.
menu.
hour(01~12).
button to set the minutes(00~59).
button to set the morning(AM) or afternoon(PM).
operation is only allowed upon
automatically switches the
Press the MENU button and then
set to
use
standby
at the
TV
input
pre-set time.
button to select the TIME
Press the
button and then
use
button to select Off Time
Press the
button and then
use
button to set the
Press the
button and then
use
button to
Press the
button and then
use
button to
Press the
button and then
use
button to select On
or
menu.
On Time.
hour(01~12).
set the minutes(00~59).
set the morning(AM) or afternoon(PM).
or
Off.
Only On
Timer function; Press the
button and then
button to set the channel at
turn-on. Then, press the
button and then use
button to set the turn-on sound level.
Setting
sleep
on
is available, however,
operation is only allowed upon
TV
input
If Auto
sleep is active and there is no input signal, the TV swithchs to Stanby mode
automatically after 10 minutes.
button to select the Auto sleep menu.
1) Press the MENU button and then use
button and then use
button to select On or Off.
2) Press the
?
Note
?
In the event of power interruption (disconnection or power failure), the clock must be reset.
Two hours after the set is switched on by the on time function it will automatically switch back
to
?
?
?
standby mode unless
Once the On
a
button has been
Off time is set, these functions operate daily at the preset time.
Off Time function overrides On Time function if they are set to the same time.
or
The set must be in
standby mode for the On Time
A31
?
pressed.
to work.
Selecting
the
options
ENGLISH
Input
If you press the button once, the following
Input Signal Window will appear. Select
the
signal type you
want
using the
button.
Child Lock
buttons to select On
Use the
or
with the remote control. This feature
In order to lock the OSD
In order to
Off. The Set
can
be set up so that it
prevent unauthorized viewing.
on
can
only be used
set the Child Lock tab to the 'on'
adjustment,
unlock it, do the following :
screen
1) Push the MENU button
can
the remote control and set Child Lock to the 'off'
position.
position.
Language
To choose the
Power
Use this function to set the power indicator on the front side of the product to On
If you set Off, it will go off. If you set On at any time, the power indicator will
Indicator
language
automatically be turned
Transparency
To
in which the control
names are
displayed.
or
on.
adjust the transparency of the OSD
menu screen.
Use this function to
Zoom
zoom
in the
screen.
When you turn the product off and on again,
the default screen size will be restored.
Press the
button to
display the
submenu for Zoom.
Reset
Use this function to reset the
product
to the
*
zooming value is set to '0', vertical and
horizontal positioning cannot be adjusted.
*
The variable range can differ
type of the input signal.
If the
according
to the
factory default. However, language selection
will not be initialized.
Note
the Zoom
menu
will be disabled if the
screen
A32
size is not Full
or
PIP/POP/PBP is in
use.
Off.
and
Selecting
Selecting
the
the
Screen
Adjusting
options
Set ID
Logo Display
Lamp
assign a unique SET ID NO (name
assignment) to each product when several
products are connected for display. Specify the
number (0~99)using the
button and exit.
Use the assigned SET ID to individually control
each product using the Product Control
Program.
You
Use this function to set the
or
Off. If you set
can
Logo Dispaly Lamp on the front side of the product
On, the lamp will automatically be turned on.
A33
to On
Adjusting Screen CLOCK/PHASE
and Position
ENGLISH
ARC
To select the
image
size of the
<TV/AV/S-Video/Component 1,
*
Auto-
configure
Clock
When the component 1
2
screen.
<RGB PC / DVI PC input only>
input only>
input signal is 720p
or
1080i, the spectacle function is
not
supported.
This button is for the automatic
adjustment of the screen position, clock and phase.
This function is suitable for analoge singnal input only(RGB PC input only).
To minimize any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is suitable for analoge singnal input only(RGB
PC input only).
Phase
To
adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters. This function is suitable for analoge
singnal input only(RGB PC input only).
To
adjust position of the screen
(RGB PC input only).
Press the
button to display the submenu
for position.
Position
Left
Right
Up
Down
A34
Moving the
screen
position horizontally.
Moving the
screen
position vertically.
and
Selecting
the
Screen
Adjusting
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
On/Off
PIP
selecting PIP in the
the following menu items
After
PIP On/Off menu,
can be adjusted.
POP
selecting POP in the POP On/Off menu,
the following menu items can be adjusted.
After
PBP
selecting PBP in the PBP On/Off menu,
the following menu items can be adjusted.
After
PIP
Input
To select
Size
To
Image
To
an
input signal for TV/AV/S-VIDEO/Component 1/Component 2/RGB PC/DVI PC.
adjust the size of the PIP/POP/PBP screen. (PIP : Small, Medium, Large
/ PBP
:
Full, 4:3)
button to display the
adjust the image of the PIP/POP/PBP screen; Press the
submenu for PIP/POP/PBP image. Use the
buttons to adjust the item to the desired
level. The items of the sub-menu may vary depending on the type of the source.
Contrast
Adjust PIP/POP/PBP
screen contrast.
Brightness
Adjust PIP/POP/PBP
screen
brightness.
Color
Adjust
the PIP/POP/PBP screen color.
Tint
To adjust the tint to desired level.
This function is available only in NTSC
*
The sub-menu
signal.
Sound
To turn the PIP/POP/PBP sound on/off.
A35
can
differ
according
broadcasting
to the
mode.
type of the input
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
adjust the position
to PIP screen.
Position
To
Swap
To switch the main-screen and subscreen
PIP
SWAP
POP
SWAP
PBP
A36
in PIP/POP/PBP mode.
ENGLISH
the
Controlling
Multiple
Products
products to a single PC.
products at a time by connecting them
(RS-232C
protocol)
Use this method to connect several
You
can
control several
Connecting
as
shown in the
The RS-232C
turn the
single PC.
the cable
Connect the RS-232C cable
*
to a
picture.
protocol is used for communication between the PC and product. You can
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Product
Communication Parameter
G Baud Rate : 9600bps (UART)
G Data Length : 8bits
G Parity Bit : None
G Stop Bit : 1bit
G Flow Control : None
G Communication Code : ASCII code
A37
Command Reference List
COMMAND 1
COMMAND 2
k
a
00H
k
b
00H
Ratio
k
c
01H
04. Screen Mute
k
d
00H
05. Volume Mute
k
e
00H
06. Volume Control
k
f
00H
07. Contrast
k
08.
k
g
h
00H
09. Color
k
i
00H
10. Tint
k
j
00H
11.
k
k
00H
12. OSD Select
k
l
00H
13. Remote Lock On/Off
k
m
00H
14. PIP/PBP/POP On/Off
k
n
00H
15. PIP Position
k
q
00H
16. Balance
17. ACC
18. PIP/PBP/POP SOURCE
k
t
k
k
u
00H
00H
00H
19. Auto
j
u
m
a
m
c
01. Power
02.
03.
Select
Input
Aspect
Brightness
Sharpness
Configure
20. Tune Command
21. Key
Transmission /
Receiving
00H
y
01H
01H
Protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
[Command 1]: First command. (j or k)
[Command 2]: Second command.
[Set ID]: You can adjust the set ID to choose desired product
ID number in Special menu. Adjustment range is 0
When selecting Set ID '0', every connected
99.
~
TV set is controlled. Set ID is indicated
as
decimal
(0~99)on menu and as Hexa decimal (0x0~0x64)
on transmission/receiving protocol.
*
[DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
*
[Cr]: Carriage
Return
ASCII code '0x0D'
*
[
]: ASCII code Space (0x20)'
A38
(Hexa)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
01H
08H
06H
01H
01H
64H
64H
64H
64H
64H
64H
01H
01H
03H
03H
64H
03H
08H
7DH
Key Code
Transmission
*
DATA
ENGLISH
the
Controlling
Transmission /
OK
Multiple
Products
Protocol
Receiving
Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Product transmits ACK
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
this format when
receiving
computer.
Error
Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Product transmits ACK
this format when
functions
or
receiving
2:
3: Wait
on
errors.
function
time
more
01. Power On
based
abnormal data from non-viable
communication
Illegal Code
Not supported
Data 1:
(acknowledgement)
(Command
:
a)
G To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data0:PowerOff
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
The Product transmits ACK
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
this format when
receiving
computer.
A39
(RS-232C
protocol)
Transmission /
Receiving
Protocol
02.
Input Select(Command : b) (Main Picture Input)
G To select input source for the Set.
You can also select an input source using the SOURCE
button
on
the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0:TV
5
:
4
:
Component
2
6:RGBPC
2:AV
3
:
S-Video
Component
Acknowledgement
8:DVIPC
1
[b][ ][Set ID][ ][OK][Data][x]
03.
Aspect Ratio(Command
G To adjust the
screen
:
c) (Main picture format)
format.
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
You
can
Screen
also
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data1:4:3
2:Full
3
:
Spectacle
4
:
Zoom1
5
:
Zoom2
6
:
1:1(PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A40
ENGLISH
the
Controlling
Transmission /
04. Screen
screen
Protocol
Receiving
Mute(Command
G To select
Multiple
:
d)
mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0
1
:
Screen mute off
:
Screen mute
on
(Picture on)
(Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume
Mute(Command
:
e)
G To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0
1
:
Volume Mute On
:
Volume Mute
(Volume Off)
Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0
1
:
Volume Mute On
:
Volume Mute
06. Volume
(Volume Off)
Off (Volume On)
Control(Command : f)
G To adjust Volume
.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A41
Products
(RS-232C
protocol)
Transmission /
07.
Receiving
Contrast(Command
G To adjust
You
can
screen
also
:
Protocol
g)
contrast.
adjust
the contrast in the Picture
menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
?Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step0
A:Step10
F:Step15
10:Step16
64
:
08.
Step
100
Brightness(Command
G To adjust
You
:
h)
brightness.
adjust the brightness
screen
also
can
in the Picture
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
?Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step
A:Step10
F:Step15
10:Step16
64
:
Step
100
A42
menu.
ENGLISH
the
Controlling
Transmission /
09.
Color(Command
G To adjust the
You
can
also
screen
adjust
Protocol
Receiving
i) (TV,
:
Multiple
AV
Products
only)
color.
the color in the Picture
menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
10.
Min:00H~Max:64H
Tint(Command : j) (TV, AV-NTSC only)
G To adjust the
You
can
also
screen
adjust
tint.
the tint in the Picture
menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red: 00H
Green: 64H
~
(Hexadecimal code)
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red: 00H
Green: 64H
~
*Tint:-50~+50
11.
Sharpness(Command
G To adjust the
You
can
also
:
k) (TV,
AV
Sharpness.
adjust the sharpness
only)
screen
in the Picture
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A43
menu.
(RS-232C
protocol)
Transmission /
12. OSD Select
Receiving
(Command
:
Protocol
ENGLISH
l)
G To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0:OSDOff
1:OSDOn
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0:OSDOff
13. Remote Lock
1:OSDOn
On/Off(Command
:
m)
G To control Remote Lock on/off to the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
Remote Lock Off
1
:
Remote Lock On
1
:
Remote Lock On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0
:
Remote Lock Off
14. PIP/PBP/POP
On/Off(Command
:
n)
G To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data0:OFF
1:PIP
2:PBP
3:POP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data0:OFF
1:PIP
2:PBP
3:POP
A44
the
Controlling
Transmission /
15. PIP
Multiple
Receiving
Position(Command
:
Protocol
q)
G To adjust PIP position.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0
:
1
:
2
:
3
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0
16.
:
1
:
2
:
3
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
Balance(Command
:
t)
G To adjust the sound Balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
*
Min:00H~Max:64H
Balance
:
-50
+50
~
A45
Products
(RS-232C
protocol)
Transmission /
17.
ACC(Command
G To adjust the
:
Receiving
Protocol
ENGLISH
u)
screen
color temperature.
Transmission
[k][u][ ][Set ID][ ][Data]][Cr]
Data 0
Normal
:
2
(9300K)
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
Acknowledgement
[u][ ][Set ID][ ][OK]][Data][X]
Data 0
Normal
:
(9300K)
2
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
18. PIP/PBP/POP
SOURCE(Command
G To select the sub-screen
:
y)
source.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0:TV
5
:
S-Video
4
:
Component
Component
2
6:RGBPC
2:AV
3
:
8:DVIPC
1
Acknowledgement
[y][ ][Set ID][ ][OK][Data][X]
Data 0:TV
5
:
S-Video
4
:
Component
19. Auto
Component
2
6:RGBPC
2:AV
3
:
8:DVIPC
1
Configure(Command : j u)
GTo adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1:Toset
Acknowledgement
[u][ ][Set ID][ ][OK][Data][X]
A46
the
Controlling
Transmission /
20. Tune
GTune
Multiple
Receiving
command(Command
channel to
: m
following physical
Protocol
a)
number.
Transmission
[m][a][ ][Set ID][ ][Data][ ][Cr]
Data 1
:
Channel Number
Acknowledgement
[a][ ]Set ID][ ][OK][Data][X]
Data 1
:
Channel Number
21.Key(Command : m c)
GTo send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
Key
code
:
Refer to page 49.
Acknowledgement
[c][ ]Set ID][ ][OK][Data][X]
A47
Products
(RS-232C
protocol)
G Connect your wired remote control to Remote Control port
G Output waveform
single pulse, modulated
with 37.917KHz
signal
on
the Product.
at 455KHz
Tc
Carrier frequency
FCAR
T1
1/Tc
=
Duty ratio
=
=
fosc/12
T1/Tc
=
1/3
G Configuration of frame
?1st frame
Lead
code
Low
custom code
High
Data code
custom code
Data code
C0C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?Repeat frame
Repeat code
Tf
G Lead code
9ms
4.5ms
0.55ms
G Repeat code
9ms
2.25ms
G Bit
?
description
Bit "0"
?
Bit "1"
0.56ms
0.56ms
1.12ms
G Frame interval
?
:
2.24ms
Tf
The waveform is transmitted
as
long
as a
key is depressed.
Tf
Tf
Tf=108ms@455KHz
Function
Note
00
PR(D)
R/C Button
01
PR(E)
R/C Button
02
VOL(G)
R/C Button
03
VOL(F)
R/C Button
08
POWER
R/C
C4
POWER ON
Discrete IR
Code(Only
Power
On)
C5
POWER OFF
Discrete IR
Code(Only
Power
Off)
09
MUTE
R/C Button
10
Number
Key
0
R/C Button
11
Number
Key
1
R/C Button
12
Number
Key
2
R/C Button
13
Number
Key
3
R/C Button
14
Number
Key
4
R/C Button
15
Number
Key
5
R/C Button
16
Number
Key
6
R/C Button
17
Number
Key
7
R/C Button
18
Number
Key
8
R/C Button
19
Number
Key
9
R/C Button
0B
TV/AV
R/C Button
98
SOURCE
R/C Button
D6
TV
Discrete IR
Code(Input
TV
Selection)
5A
AV
Discrete IR
Code(Input
AV
Selection)
D8
S-Video
Discrete IR
Code(Input S-Video Selection)
BF
Component
1
Discrete IR
Code(Input Component
1
Selection)
D4
Component
2
Discrete IR
Code(Input Component
2
Selection)
C6
DVI
Discrete IR
Code(Input
D5
RGB
Discrete IR
Code(Input RGB Selection)
0E
SLEEP
R/C Button
43
MENU
R/C Button
44
OK
R/C Button
60
PIP
R/C Button
63
SWAP
R/C Button
79
ARC
R/C Button
76
ARC(4:3)
Discrete IR
Code(Only
4:3
77
ARC(Full)
Discrete IR
Code(Only
Full
AF
ARC(ZOOM)
Discrete IR
Code(Only
Zoom
54
AUTO PROGRAM
R/C Button
39
CAPTION
R/C Button
99
AUTO CONFIG
Discrete IR Code
Code(Hexa)
Button(Power On/Off)
DVI
Selection)
mode)
mode)
mode)
Troubleshooting
No
image
Is the monitor power cord connected?
Is the power indicator
light on?
Power is on, power indicator is green
but the
screen
appears
is
?
?
?
displayed
See if the power cord is
outlet.
See if the power switch is turned
Adjust brightness and
?
If the
product
mouse or
range' message
?
appear?
signal
on.
again.
cable' message
?
appear?
is in power
move
the
key.
press any
signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring
to the Specifications in this User's Guide.
Maximum resolution
RGB PC
:
DVI PC
1360
The
:
signal
1600
x
x
1200 @60Hz
768 @60Hz
cable between PC and
connected. Check the
?
saving mode,
The
*
Does the 'Check
contrast
to the
extremely dark.
Is the power indicator amber?
Does the 'Out of
properly connected
Press the 'SOURCE'
to check the
signal
menu
product
is not
cable.
in the remote control
input signal.
'Unknown Monitor' message appears when the product is connected.
Did you install the driver?
?
Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com)
?
See if the
referring
plug&play function
is supported
to the video card User's Guide.
by
'Controls locked' message appears.
The 'Controls locked' message
appears when pressing the Menu
button.
Note
*
*
?
The control
locking function prevents unintentional
OSD setting change due to careless usage. To
unlock the controls, simultaneously press the Menu
button and G button for 5 seconds. (You cannot set
this function using the remote control buttons. You
can set this function in the product only.)
Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A50
ENGLISH
Is the
screen
position wrong?
?
D-Sub
analog signal
the remote control to
optimal
screen
mode. If
?
automatically select the
status that fits into the current
adjustment
Position OSD
Press the "AUTO" button in
--
is not
satisfactory,
use
the
menu.
See if the video card resolution and
supported by the
frequency are
product. If the frequency is out of
range, set to the recommended resolution in the
Control Panel Display Setting menu.
--
Do thin lines appear on the
background screen?
?
D-Sub analog signal Press the "AUTO" button
in the remote control to automatically select an
--
optimal
screen
mode. If
or
the
?
D-Sub
screen
in the
automatically select an
is not
satisfactory,
use
the
menu.
?SeeiftheZoomvalueissetto0.Ifitis,you
cannot adjust the H/V Position value.
adjusted
?
If the
PC,
screen
Brightness
differs in the main and
screen
?
size is not full when connected to the
execute the PIP/POP/PBP to
screen
change to full
mode.
You cannot
adjust brightness and
PIP/POP/PBP Screen
when connected to the
menu
tint in the
for the sub-screen
among PIP/POP/PBP menus. Therefore,
brightness can be different for the sub-screen.
PC.
The
the
menu.
Screen size is automatically
when connected to the PC.
sub
use
status that fits into the current
adjustment
Phase OSD
Unable to
satisfactory,
Press the "AUTO" button
--
in the remote control to
mode. If
Zoom
is not
menu.
analog signal
optimal
adjust the
horizontal/vertical position
status that fits into the current
adjustment
Clock OSD
Horizontal noise appears
characters look blurred.
--
screen
is
displayed abnormally.
?
The proper
input signal
is not connected to the
signal port. Connect the signal
with the source input signal.
No sound appears in the TV channel
display window.
After-image appears when the
product is turned off.
cable that matches
?SeeiftheTVsoundissettomono.ifitis,the
sound will not be
?
displayed.
If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screensaver
function.
No sound?
?
?
?
No sound is available when the
PIP/POP/PBP mode is
engaged.
Sound is too dull.
signal
is not
?
being
received.
?
?
?
The
screen
menu
size function in the OSD
?
Adjust the volume.
See if the sound is set
properly.
See if the Sound is set to On in the PIP/POP/PBP
Select the
appropriate equalize
sound.
Adjust the volume.
See if you have selected the proper channel
mode.
Use the automatic channel setup function.
See if the TV antenna is properly connected.
See if the PIP/POP/PBP function is in
PIP/POP/PBP function is in use, the
function may not work.
does not work.
Screen has poor color resolution
?
(16 colors).
Set the number of colors to
more
use.
If the
screen
size
than 24 bits
(true
color)
Select Control Panel Display
Table menu in Windows.
--
Screen color is unstable
or mono-
?
--
Settings
Check the connection status of the
--
Color
signal
cable.
green, white or black
the screen, which can be
color)
Or, re-insert the PC video card.
colored.
Do black spots appear
screen?
properly.
menu.
?
Sound is too low.
The TV
?
See if the audio cable is connected
on
the
?
Several
pixels (red,
may appear on
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
Specifications
The
product specifications
improvement.
can
change
without
prior
notice for
product
LCD Panel
Power
(80.04 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 80.04 cm
0.5025 mm (Pixel Pitch)
[32 inches]
32 inches
[37 inches]
37 inches
[42 inches]
42 inches
(94.03 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 94.03 cm
0.6000 mm (Pixel Pitch)
(106.68 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Anti-Glare coating
Visible diagonal size: 106.68 cm
0.681 mm (Pixel Pitch)
[32 inches]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.0A
On Mode
Sleep
Mode
Off Mode
:
160W
:≤4W
:≤2W
[37 inches]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.4A
On Mode
Sleep
Mode
Off Mode
:
220W
:≤4W
:≤3W
[42 inches]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.8A
On Mode
Sleep
Mode
Off Mode
:
300W
:≤4W
:≤3W
NOTE
Information in this document is
subject to change without
A53
notice.
The
product specifications
improvement.
can
change
without
prior
notice for
ENGLISH
[2]
[1]
Dimensions
product
&Weight
H
H
W
D
W
D
[4]
[3]
H
H
D
W
Width
x
Height
W
x
Depth
[32 inches]
[1] 80.30 cm (31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
[2] 80.30 cm (31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[3] 96.40 cm (37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
[4] 96.40 cm (37.95 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[37 inches]
[1] 92.80 cm (36.54 inches) x 61.90 cm
[2] 92.80 cm (36.54 inches) x 57.12 cm
[3] 112.9 cm (44.45 inches) x 61.90 cm
[4] 112.9 cm (44.45 inches) x 57.12 cm
(24.37 inches) x 22.77 cm (8.96 inches)
(22.49 inches) x 12.00 cm (4.72 inches)
(24.37 inches) x 22.77 cm (8.96 inches)
(22.49 inches) x 12.00 cm (4.72 inches)
[42 inches]
[1]
[2]
[3]
[4]
105.7 cm
(41.61 inches) x 70.20 cm
105.7 cm (41.61 inches) x 65.30 cm
125.9 cm (49.57 inches) x 70.20 cm
125.9 cm (49.57 inches) x 65.30 cm
(27.64 inches) x 29.45 cm (11.59 inches)
(25.71 inches) x 11.91 cm (4.69 inches)
(27.64 inches) x 29.45 cm (11.59 inches)
(25.71 inches) x 11.91 cm (4.69 inches)
Net
[32 inches]
[1] 19.4 kg (42.77 lbs)
[3] 21.1 kg (46.52 lbs)
[2]
[4]
16.0
kg (35.27 lbs)
17.7 kg (39.02 lbs)
[37 inches]
[1] 31.1 kg (68.56 lbs)
[3] 39.1 kg (86.20 lbs)
[2] 29.0 kg (63.93 lbs)
[4] 35.1 kg (77.38 lbs)
[42 inches]
[1] 41.4 kg (91.27 lbs)
[3] 44.0 kg (97.00 lbs)
[2] 37.0 kg (81.57 lbs)
[4] 39.6 kg (87.30 lbs)
A54
D
Specifications
The
product specifications
improvement.
Video
Signal
can
change
Max. Resolution
without
prior
notice for
RGB PC
:
DVI PC
1360 X 768 @60Hz
:
product
1600 X 1200 @60Hz
--
It may not be
supported
depending on the OS or video card type.
Recommended Resolution
RGB PC
:
WXGA 1360 X 768 @60Hz
DVIPC:WXGA1360X768@60Hz--Itmaynotbe
supported depending
Horizontal
RGB PC
Frequency
:
30
on
the OS
or
video card type.
83 kHz
-
DVIPC:30-72kHz
Vertical
56
Frequency
Synchronization Type
Conditions
*
Applicable only
Separate/Composite/SOG (Sync On Green)/Digital
Operational Condition Temperature: 10˚C 35˚C Humidity: 10%
Storage Condition
Temperature: -20˚C 60˚C Humidity: 5%
~
,
~
,
for models that support the
RMS Audio
Audio
85 Hz
15-pin D-Sub type, DVI-D (digital), S-Video,
Composite Video, HDTV, DVD
Input Connector
Environmental
-
Output
Input Sensitivity
Speaker Impedance
speakers
10W+10W(R+L)
0.7Vrms
8Ω
NOTE
Information in this document is
subject to change without
A55
notice.
80%
~
95%
~
PC Mode
--
Preset Mode
Preset mode
1
23456789
Vertical
Frequency
(kHz)
Frequency
(Hz)
Vertical
Frequency Frequency
(kHz)
(Hz)
Preset mode
VGA
640
x
350
31.469
70
11
VESA 1024
x
768
60.123
75
VGA
720
x
400
31.468
70
12
VESA 1024
x
768
68.68
85
VGA
640
x
480
31.469
60
13
VESA 1280
x
720
44.772
60
VESA 640
VESA 640
x
480
37.500
75
14
VESA 1360
x
768
47.72
60
x
480
43.269
85
15
VESA 1280
x
1024
63.981
60
VESA 800
VESA 800
x
600
37.879
60
16
VESA 1280
x
1024
79.98
75
x
600
46.875
75
17
VESA 1600
x
1200
75.00
60
VESA 800
MAC
832
x
600
53.674
85
x
624
49.725
75
RGBPC:Mode1~Mode17
48.363
60
DVIPC:Mode1~Mode15
VESA 1024
10
Horizontal
Horizontal
x
768
Power Indicator
Mode
Product
On Mode
Sleep
Green
Mode
Amber
Off Mode
-
VESA wall
mounting
Connected to another
object (stand type and wall-mounted type. This
product accepts a VESA-compliant mounting interface pad.- optional)
For further information, refer to the VESA Wall Mounting Instruction
Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased separately
computer
stores
A56
at most
ENGLISH
Download PDF

advertising