LG | L4200A | LG L4200A Owner’s Manual

Table of Contents
Installation
and
Connection
Safety
A1
Precautions
Accessories
A4
Using the Remote Control
A5
To arrange cables in order
Connecting
the
-
A8
Optional
A9
Speakers Optional
-
Name and Function of the Parts
Connecting
Input
Selection
and
Tracking
A10
A11
The Monitor
Connecting
the Monitor
A11
Connecting
the VCR/DVD
A13
Connecting
the HDTV
A14
Connecting
the DVD
Connecting
to
Connecting
AV
Selecting
How to
and
(720p/1080i)
A15
(480i)
DVI-D(HDCP)
from the
VCR/DVD/Set-top
Box
A17
Outputs
A18
Adjusting the Screen
adjust the OSD (On Screen Display) Screen
A21
Adjusting
Screen Color
A22
Adjusting
the audio function
A23
Selecting
the
Options
A24
the CAPTION & V CHIP function
A25
To
adjust
Adjusting
Screen CLOCK/PHASE and Position
Adjusting
PIP/POP/PBP Mode
Controlling
the
(Multiple Screen)
A31
Functions
Multiple Monitors (RS-232C protocol)
A32
A34
A45
IR Code
Miscellaneous
A16
Troubleshooting
A47
Specifications
A50
trademark of SRS Labs,Inc.
technology is incorporated under license from SRS Labs,Inc.
is
a
i
ENGLISH
Precautions
Safety
Please read these
safety precautions carefully
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
ignore the caution message, you may
Precautions in
installing
be
before
using
seriously injured
slightly injured
or
the
or
the monitor.
there is
a
possibility of
product may be damaged
the Monitor
Warning
Keep away from heat sources like electrical heaters.
-
Electrical shock, fire, malfunction
deformation may
or
Keep the packing anti-moisture material
-
occur.
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
put heavy objects on the monitor or sit upon it.
If the monitor collapses or is dropped, you may be injured. Children
Do not
-
must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the monitor in
-
Dust
or
moisture
a
neat and
can cause
If you can smell smoke
service center.
-
If you continue to
use
or
injury.
dry place.
electrical shock, fire
other odors
without
or
or
taking proper
hear
or
a
product damage.
strange sound unplug the power cord and
contact the
measures, electrical shock or fire can occur.
If you dropped the monitor or the case is broken, turn off the monitor and unplug the power cord.
If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
-
center.
Do not
drop metallic objects such as coins, hair pins, chopsticks or wire into the monitor, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the monitor, unplug the power cord and
-
contact the service center.
Caution
Make
sure
the monitor ventilation hole is not blocked. Install the monitor in
a
suitably wide place (more
than 10cm from the wall)
-
If you install the monitor too close to the
wall, it may be deformed
or
fire
can
break out due to internal heat.
Do not block the ventilation hole of the monitor
-
The monitor
can
be deformed
Install the monitor
-
or
fire
can
by a tablecloth or curtain.
break out due to overheating inside the monitor.
place that has no risk of dropping the monitor.
If the monitor is dropped, you may be injured or the monitor may be broken.
on a
flat and stable
Install the monitor where
no
EMI
occurs.
Keep the monitor away from direct sunlight.
The monitor can be damaged.
-
A1
Electrical Power Related Precautions
ENGLISH
Warning
Make
-
to connect the power cable to the
You may be electrocuted or injured.
grounded
sure
current.
Use the rated
-
voltage only.
The monitor can be damaged,
During
-
a
thunder
or
or
you may be electrocuted.
lightning storm, unplug the power cable or signal cable.
You may be electrocuted
or a
fire
can
break out.
Do not connect several extension
cords, electrical appliances or electrical heaters to
power bar with a grounding terminal designed for exclusive use with the computer.
A fire can break out due to overheating.
a
single outlet. Use a
-
Do not touch the power plug with wet hands.
the power plug completely or wipe dust off.
-
You may be electrocuted due to
excess
Additionally,
it the cord
pin is wet or covered with dust, dry
moisture.
If you don't intend to use the monitor for a long time, unplug the power cable from the monitor.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
a
fire
can
break out.
Hold the
plug when pulling out the power cable. Do not bend the power cord
heavy objects on the power cord.
The power line can be damaged, which may cause electric shock or fire.
with excessive force
or
put
-
Do not insert
(like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
-
a
conductor
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the monitor is
Electrical shock can damage the monitor.
Precautions in
Moving
in
use.
the Monitor
Warning
Make
-
to turn off the monitor.
You may be electrocuted
Make
-
sure
or
the monitor
can
be
damaged.
moving the monitor.
You may be electrocuted or the monitor can be damaged.
sure
to
remove
all cables before
A2
Precautions
Safety
Caution
Do not shock the monitor when
-
You may be electrocuted
Do not
or
moving
the monitor
it.
can
be
dispose the product-packing box. Use
damaged
it when you
move.
panel face forward and hold it with both hands to move.
If you drop the monitor, the damaged monitor can cause electric shock or fire. Contact with the service
repair.
Make the
-
Precautions in
Using
center for
the Monitor
Warning
Do not
-
-
Fire
disassemble, repair or modify the monitor at your
or
electric shock accident
discretion.
own
can occur.
Contact the service center for check, calibration
Do not spray water on the monitor
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene). Fire or
Keep the monitor away from water.
-
Fire
or
electric shock accident
can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
near
the monitor.
danger of explosion or fire due careless handling of the inflammable substances.
cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
When
-
The water
Take
a
can
sink into the monitor, which
rest from time to time to
Keep the monitor clean
electric shock
or
serious malfunction.
protect your vision.
at all times.
position when working with
Take
a
comfortable and natural
Take
a
regular break when working with
Do not press
scratch on it.
can cause
a
strongly upon the panel with
monitor for
a
hand
or
a
a
monitor to relax the muscles.
long time.
sharp object such
as
nail, pencil
or
pen,
or
make
Keep proper distance from the monitor.
Your vision may be impaired if you look at the monitor too closely.
-
Set the appropriate resolution and clock by referring to the User's Manual.
Your vision can be impaired.
-
Use authorized
-
Monitor
On
can
detergent only when cleaning the monitor. (Do
not
use
benzene, thinner or alcohol.)
be deformed.
Disposal
lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
The fluorescent
A3
a
Accessories
Please check the accessories in the
*
The monitor and the accessories
product package.
be different from the
can
Free Mount
Desktop Stand Type
figures
shown here.
ENGLISH
Type
OR
Remote Control/
Batteries
User's Guide/
15-pin D-Sub Signal
Driver CD/Cards
Cable
Audio Cable
Power Cord
DVI-D
Signal Cable
RCA-PC
(PC)
Audio Cable
Speaker
Optional
kit / Screws
(Applicable only for models
that support the
Wall-mount Rack
Please refer to the enclosed "Installation Guide" when
installing the wall-mount rack.
Inserting
batteries into remote control.
1. Take out the
battery cap.
2. Insert the
battery
3. Close the
battery cap.
?
You
can use a
and 30
with correct
polarity (+/-).
remote controller 7 meter distance
degree (left/right)
within the
receiving
scope.
?
Dispose of used batteries in the recycle bin
prevent environmental pollution.
A4
to
unit
speakers)
the
Remote
Control
Using
Name of the Remote Controller Buttons
Power On/Off Button
Mute button
Sleep
?
When watching AV/DVD/HDTV
The monitor will be automatically turned
Input Select Button
AV Button
-
?
(See
?
next
off after a certain
Press this button
page)
period of time.
repetitively to select an
appropriate time duration
Menu Button
?
Button
EZ Video Button
Exit Button
watching AV/DVD/HDTV
Automatically adjusts the image.
Press this button repetitively to set
the intended screen. (See A22)
When
-
Volume
Button
Check Button
Auto Button
There is not
which is
a
function
?PC: Automatic adjustment function
(Operational for the analog signal only)
supported
Sound Mode Select
Select the sound mode
:
MONO/STEREO
CAPTION Button
(See A25)
Video
Operation Button
Applicable for LG products only
A5
-
Optional
?
Input Select Button
?
If you press the button once,
the following Input Signal
This button will be enabled
only when
you selected the AV signal. The signal
type will be changed with the following
order. Set the signal type you want.
Window will appear. Select
the signal type you want
using the
AV Button
button.
AV
1.
PIP
(Picture
in
The sub-screen
:
2.
SMALL
Component 1
moves
to the next mode whenever you press this button.
->
LARGE
->
OFF
POP (Picture out Picture) Button
The sub-screen
:
POP ON
->
moves
Note
PIP
to the next mode whenever you press this button.
PBP(FULL)
->
PBP(4:3)
POP ON
?
Component 2
Picture) Button
MEDIUM
->
S-Video
->
OFF
PBP
(FULL)
PBP
(4:3)
Case1/Case2
Different descriptions
are
applicable depending on the type of AV option board selected (an optional
product).
A6
ENGLISH
the
Remote
Control
Using
3.
SWAP Button
You
can
swap the main
screen
and the sub-screen when the PIP/POP/PBP function is used.
PIP
SWAP
POP
SWAP
PBP
only 'Input Signal 2' can be displayed on the sub-screen. On
the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You can
swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
When
'Input Signal
*PIP function is not
1'
comes on
supported
in
in the main screen,
480i, 576i and 1080i modes.
<Table of PIP/POP/PBP Function Support>
Main Screen
AV
S-Video COMPONENT 1 COMPONENT 2
Sub-Screen
AV
S-Video
COMPONENT 1
COMPONENT 2
RGB PC
DVI PC
A7
RGB PC
DVI PC
To arrange cables in order
*
Applicable only
Optional
-
for models that support the stand
1. Disassemble the stand cover. The cover may be easily disassembled
down
on
the base
as
shown in the
Stand
figure.
cover
2. After connecting the cables,
stand. If
by pressing
securely connected,
correctly position
the stand
cover
you will hear the latch click into
A8
into the holes
place.
on
the
ENGLISH
the
Connecting
Speakers Optional
-
*
Use the
screws
in the below
to secure the
Applicable only
speakers
on
the
rear
for models that support the
side of the monitor
as
speakers
shown
figure.
When the
A9
speaker
is installed.
Name and Function of the Parts
Rear View
Back
-
Cap
Open the back cap before
you install the monitor.
DVI
Power Connector
:
IN(HDCP)
RGB IN
AUDIO IN
Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
PC
Signal Inputs
PC Sound Jack
: Connect the audio cable to the *LINE OUT
AV
Input
jack of the
PC sound card.
Ports
*LINE OUT
A terminal used to connect to the
the
connecting
speaker including
only Speaker Out,
If the Audio Out of the PC sound card
the card
built-in
terminal of the PC sound card is checked
PC sound card has
using
a
jumper of the
program
amplifier (Amp). Make sure that
before connecting. If the Audio Out of
reduce the PC volume.
supports both Speaker Out and Line Out,
(Refer to the Sound Card Manual).
A10
convert to Line Out
ENGLISH
the
Monitor
Connecting
First of all,
Then,
see
if the
connect the
computer, monitor and the peripherals
signal input
are
turned off.
cable.
A
When
connecting
with the DVI
B
When
connecting
with the DSub
signal input cable. (IBM compatible PC)
C
When
connecting
with the DSub
signal input cable. (Macintosh)
signal input cable.
Rear side of the monitor.
A
PC
PC
B
C
MAC
Macintosh
Adapter (not included)
Use the standard Macintosh
adaptor is available
in the market.
Connect the power cord.
Rear side of the monitor.
*
When
adapter since an incompatible
connecting to a
wall outlet.
A11
(Different signaling system)
A
Turn on power
by pressing
the power button
on
the monitor.
ENGLISH
Power button
B Turn
Select
an
the PC.
on
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
with
A When connecting
?
Select DVI PC
B When connecting
?
:
?
Note
:
at the front side of the monitor.
signal input cable.
digital signal.
D-Sub signal input cable.
15-pin D-Sub analog signal.
a
How to connect to two
computers.
Connect the signal cables (DVI and D-Sub)
Press the SOURCE button in
?
input signal.
DVI-D
DVI-D
with
Select RGB PC
a
the remote controller to select the
a
to each
computer.
remote controller to select the
Directly connect to a grounded power outlet on the wall
wire.
A12
computer to
or a
use.
power bar with
a
ground
the
VCR/DVD
Connecting
Connect the video cable
cord
A
(See
page
as
shown in the below
and then connect the power
A11).
connecting with a RCA cable.
Connect the input terminal with a proper color match.
(Video Yellow, Sound (left) White, Sound (right)
When
?
--
B
figure
When
?
--
connecting
with
a
Connect to the S-Video
--
Red)
S-Video cable.
input
terminal to watch
high image quality
movies.
Monitor
Yel ow White
Red
RCA Cable
(not included)
S-Video Cable
(not included)
Y
W
R
VCR/DVD Receiver
Select an input signal.
Press the SOURCE button on the remote controller to select the
Or, press the SOURCE button at the front side of the monitor.
A
When
?
B
with
an
RCA cable.
with
an
S-Video cable.
Select AV.
When
?
connecting
connecting
Select S-Video.
A13
input signal.
the
HDTV(720p/1080i)
Connecting
Connect the video/audio cable
power cord
?
(See
Connect the
page
as
shown in the below
figure
and then, connect the
A11).
input terminal with
a
ENGLISH
proper color match.
Monitor
Gre n
Blue
Red
White
Red
(Compnetabl noticlude)
Gre n
Blue
AudioCable (noticlude)
Red
White
Red
HDTV Receiver
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote controller to select the
at the front side of the monitor.
Select Component 1.
A14
input signal.
DVD
the
(480i)
Connecting
Connect the video/audio cable
power cord
?
(See
Connect the
page
as
shown in the below
figure
and then, connect the
A11).
input terminal with
a
proper color match.
Monitor
Gre n
Blue
Red
White
(Compnetabl noticlude)
Gre n
Blue
Red
AudioCable (noticlude)
Red
White
Red
DVD Receiver
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote controller to select the
at the front side of the monitor.
Select Component 2.
A15
input signal.
to
Connecting
DVI-D(HDCP) from the VCR/DVD/Set-top Box
Connect the video/audio cable
power cord
(See
page
as
shown in the below
figure
and then connect the
A11).
Monitor
DVI-D
Signal
RCA-PC
Cable
Audio Cable
VCR/DVD/Set-top Box
Select an input signal.
Press the SOURCE button on the remote controller to select the
Or, press the SOURCE button at the front side of the monitor.
?
Select DVI PC.
A16
input signal.
ENGLISH
Connecting
AV
Connect to the external device if you record the
When you set the
you're watching
input signal of the main
to the AV
screen as
'AV
Outputs
broadcasting.
(CVBS)',
you
can
transmit the
output terminal.
Monitor
Yel ow White
Red
RCA able (noticlude)
Y
Video/TV/Monitor
A17
W
R
signal that
and
Selecting
the
Screen
Adjusting
Name of the Buttons in the Screen
Adjustment
Unit
ENGLISH
?
Power Button
Press this button to turn
the power. Press this button
on
again
to
turn it off.
?
Power Indicator
?
MENU Button
Adjust
lights up green when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
Use this button to show/hide the OSD
(On Screen Display)
menu
screen.
?
OSD Select /
This Indicator
Use this button to select
an
icon
or
adjust the setting
Button
?
Use this button to
directly control
brightness and contrast of the PC signal
(RGBPC/DVIPC).
?
Adjust the volume.
A18
in the OSD
screen.
and
Selecting
the
Screen
Adjusting
Name of the Buttons in the Screen
Adjustment
Unit
[For PC Analog signal]
AUTO/SELECT Button
[Other signals]
?
The current
signal and mode information
SOURCE Button
?
Select the input signal
AV
Composite Video
Separate Video
S-Video
Component 1
Component 2
HDTV
RGB PC
15-pin D-Sub analog signal
DVI digital signal
DVI PC
?
The unit that receives the
DVD
signal from the
A19
remote controller.
will be
displayed.
OSD Menu
Icon
Function
Description
Adjusts screen brightness,
contrast and color that you
prefer.
PICTURE
Adjusts
the audio function.
Adjusts
the
screen
status
Adjusts
the
screen
video.
SOUND
according
to the circumstances.
SPECIAL
SCREEN
Adjusts PIP/POP/PBP
mode function.
PIP/POP/PBP
Note
OSD(On Screen Display)
The OSD function enables you to
adjust the
graphical presentation.
A20
screen
status
conveniently since
it
provides
ENGLISH
and
Selecting
How to
Pops up
the
menu
adjust the OSD (On Screen Display)
Move where
you want to
Select
menu
Move where
you want to
a
icon
adjust
screen
the
Screen
Adjusting
menu
a
icon
Adjust the status
Use the remote controller to
Press the MENU Button, then the main
menu
of the OSD appears.
2
To
3
When the icon you want becomes
highlighted, press the SET Button.
4
Use the
adjust the item
5
Accept the changes by pressing the SET Button.
6
Exit the OSD
access a
How to
control,
use
the
Buttons.
Buttons to
by pressing the
to the desired level.
EXIT Button.
adjust the screen automatically
You need to
adjust the screen display when connecting the monitor to
new computer or changing the mode. Refer to the following section to
set an optimal monitor screen.
Press the AUTO/SELECT button
in the
a
(AUTO button in a remote controller)
PC analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If
Save
Exit from the
adjustment
menu screen.
adjust
?
1
Select
screen
adjustment is not satisfactory, you need
clock and phase in the OSD menu.
to
adjust
screen
A21
position,
adjust the OSD
screen.
Adjusting Screen Color
EZ Video
AV/S-Video/Component
Component 2 input only
The EZ Video function
automatically adjusts the
screen
1/
image quality
depending on the AV usage environment.
Dynamic : Select this option to display with a sharp image.
Standard : The most general and natural screen display status.
Mild : Select this option to display with a mild image.
Game : Select this option to enjoy dynamic image when playing
User : Select this option to use the user-defined settings.
?
?
?
?
a
game.
?
Contrast
To adjust the contrast of the
Brightness
To adjust the brightness of
screen.
the screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the
cleaness of the
screen.
Tint
To adjust the tint to desired level.
ACC
factory setting color set.
Warm : Slightly reddish white.
Normal : Slightly bluish white.
Cool : Slightly purplish white.
Selecting
?
?
?
a
input is RGB PC(D-Sub analog)/DVI PC(DVI Digital), the adjustable items in the
ACC function are color temp (9300K / 6500K).
If the 'EZ Video' setting in the PICTURE menu is set to Dynamic, Standard, Mild or Game
the subsequent menus will be automatically set.
If the
Note
A22
ENGLISH
and
Selecting
the
Screen
Adjusting
Adjusting Screen Color
RGB PC / DVI PC input only
ACC
?
?
6500K/9300K
Selecting a factory setting color set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
User : Select this option to use
the user-defined settings.
Contrast
To adjust the contrast of the
screen.
Brightness
To adjust the brightness of the
screen.
Red / Green / Blue
Set your
Adjusting
own
color levels.
the audio function
quality will be selected automatically
depending on the video type that you're currently watching.
The best sound tone
EZ Audio
?
Flat
The most
?
commanding
and natural audio.
Music
Select this option to enjoy the original sound when listening
to the music.
?
?
Movie
Select this option to enjoy sublime sound.
Speech
Select this option to watch sports broadcasting.
?
User
Select this option to
Balance
Use this function to balance sound from the left and
AVL
To
SRS WOW
Set the SRS WOW
use
the user-defined audio
settings.
right speakers.
adjust uneven sound volumes across all channels
appropriate level. To use this feature, select ON.
or
signals automatically to the
most
menu on.
The SRS WOW function
plays back the mono or stereo sound input with the dynamic surround
effects. It will provide rich and profound sound tone. If you set the SRS WOW on, user audio
setting can not be adjusted.
Note
When connected to your computer and the 'EZ Audio' setting in the audio menu is
Music, Movie or Speech, the available menus are Balance, AVL and SRS WOW
.
A23
one
of Flat,
Selecting
the
options
ENGLISH
Input
If you press the button once, the following
Input Signal Window will appear. Select
the
signal type you
want
using the
button.
Child Lock
buttons to select On
Use the
or
with the remote control. This feature
In order to lock the OSD
In order to
Off. The Set
can
be set up so that it
prevent unauthorized viewing.
on
can
only be used
set the Child Lock tab to the 'on'
adjustment,
unlock it, do the following :
screen
1) Push the MENU button
can
the remote control and set Child Lock to the 'off'
in which the control
position.
position.
Language
To choose the
Power
Use this function to set the power indicator on the front side of the monitor to ON
If you set OFF, it will go off. If you set ON at any time, the power indicator will
Indicator
language
automatically be turned
Transparency
To
names are
displayed.
or
on.
adjust the transparency of the OSD
menu screen.
Use this function to
Zoom
zoom
in the
screen.
When you turn the monitor off and on again,
the default screen size will be restored.
Press the
button to
display the
submenu for Zoom.
Reset
Use this function to reset the monitor to the
*
zooming value is set to '0', vertical and
horizontal positioning cannot be adjusted.
*
The variable range can differ
type of the input signal.
If the
according
to the
factory default. However, language selection
will not be initialized.
Note
the Zoom
menu
will be disabled if the
screen
A24
size is not Full
or
PIP/POP/PBP is in
use.
OFF.
and
Selecting
Selecting
the
the
Screen
Adjusting
options
Set ID
assign a unique SET ID NO (name
assignment) to each monitor when several
monitors are connected for display. Specify the
number (0~99)using the
button and exit.
Use the assigned SET ID to individually control
each monitor using the Monitor Control Program.
You
Logo Display
Lamp
can
Use this function to set the
or
OFF. If you set
Logo Dispaly Lamp on the front side of the monitor
ON, the lamp will automatically be turned on.
Selecting the options
(To adjust the CAPTION
& VCHIP function
Set ID
CC1
Logo Display Lamp
CC2
Caption / Text
CC3
Caption
CC4
Parental
TEXT1
-
to ON
US Only)
TEXT2
TEXT3
TEXT4
Caption / Text
Use the
buttons to select
caption mode.
Text services give a wide variety of information on all kind of subjects(ex. captioned program
lists, weather forecasts, stock exchange topics, news for hearing-impaired....) on up to half of
the TV screen. But not all stations offer text services, even though they might offer
captioning.
In the event you are receiving a poor signal, an empty black box may appear and disappear,
even when the text mode is selected. This is a normal when receiving a poor signal.
This TV is programmed to remember the CAPTION / TEXT mode it was last set to, when you
turn the power off.
A25
Selecting the options
(To adjust the CAPTION
& VCHIP function
-
ENGLISH
US Only)
Caption
Set ID
On
Logo Display Lamp
EZ mute
Caption
/ Text
Off
Caption
Parental
Use the
buttons to select
captions.
[Remote Control]
Press the CAPTION button
SET button to
repeatedly to display the caption option
select the caption option.
Off
*
shown below. Press the
EZ Mute
EZ Mute
:
Parental
On
as
If sound is on, the
caption
will be off. On the
contrary, if sound is off, the caption will be
This function is used to block program viewing based on the ratings sent
station. The default setting is to allow all programs to be viewed. Viewing
the type of program and by the categories chosen to be blocked. It
program viewing for a time period.
by the broadcast
can be blocked by
is also possible to block all
Set ID
Logo Display Lamp
Caption
/ Text
Enter Code
____
Caption
Parental
Optional (Canadian only)
Select the PARENTAL
correct
button. The 'Enter Code' window will appear. Once the
is entered, sub-menu that allows a user to control various blocks will be
menu
and click
four-digit password
enabled. The initial password is
set for '0000' and it can be
PAGE A28
A26
on.
changed through 'Set Password'
menu.
and
Selecting
the
Screen
Adjusting
Selecting the options
(To adjust the CAPTION & VCHIP function
-
US Only)
V-CHIP
-
rating and categories
Rating guidelines are provided by broadcast station. Most television programs and television
movies can be blocked by TV rating and/or individual categories. Movies that have been shown
at the theaters or direct-to-video movies use the Movies Rating System(MPAA) only.
For movies
previously shown
in theaters.
MPAA
MOVIE Ratings
-
:
Unblocked
G&Above
General audience
: Parental guidance suggested
PG&Above
: 13 years and up
PG-13&Above
: Restricted
R&Above
: 17 years and up
NC-17&Above
-X
: Adult
If you set PG-13&Above, G&Above and PG movies will be available
PG-13, R, NC-17, and X will be blocked.
-
:
-
-
-
-
:
Age Block
GENERAL TV Rating
-
-
-
-
-
Unblocked
TV-G&Above
TV-PG&Above
TV-14&Above
:
TV-MA
:
CHILDREN TV
-
-
-
:
:
:
General audience / Individual categories do not apply.
Parental guidance suggested
14 years and up
Mature audience
Rating
:
Unblocked
TV-Y&Above
TV-Y7
:
:
Youth / Individual content
Youth, 7 years and up.
A27
categories do
not
apply.
Selecting the options
(To adjust the CAPTION
& VCHIP function
-
US Only)
ENGLISH
Content Block
CONTENT Categories
:
Dialogue(sexual dialogue)
Language(adult language)
Sex Scene(sexual situations)
:
Violence
F Violence(fantasy
:
-
-
-
-
-
violence)
:
:
:
Applies to TV-PG&Above, TV-14.
Applies to TV-PG&Above, TV-14&Above,
Applies to TV-PG&Above, TV-14&Above,
Applies to TV-PG&Above, TV-14&Above,
Applies only to TV-Y7.
Set Password
This
Lock On/Off
To select the VCHIP function ON/OFF.
password
1.
Open
the
to
menu
is to be used to
to the
parental controls
any four-digit number.
the OSD.
menu. ->
->
Press the
Press the
with
a
password. The default password is '0000'. You
buttons to select the
Special
menu, then press the
buttons to select the Parental sub-menu, then press the
the sub-menu.
2.
TV-MA.
password
a
access
the
TV-MA.
change password. Once the correct current password is
entered using the number panel in a remote control, the window for new password will
appear. Enter your choice of new four-digit password.
Setting
You control
TV-MA.
can
change
button to open
button to open
Enter Code
Use the number
pad
to enter your
password when prompted.
__ __
If you have not set a passwod, enter 0000.
If you are unable to correct the problem yourself, contact the service center.
3.
buttons to select the Set Password sub-menu,
Press the
then press the
button to
Enter New Code
change the setting. Use the number button
__
pad
4.
to enter a new
__
four-digit password when prompted.
Re-enter Code
Re-enter the
new
four-digit password when prompted.
__
A28
__
and
Selecting
the
Screen
Adjusting
Selecting the options
(To adjust the CAPTION & VCHIP function
V-CHIP
-
and
can
-
Canadian
-
PARENTAL
English
MPAA
Age
Block
English
Unblocked
Francais
C&Above
Content Block
C8&Above
Set Password
G&Above
Lock On/Off
PG&Above
Canadian
14+
18+
MOVIE Ratings
-
-
-
-
-
-
-
:
Unblocked
C&Above
:
Under 8 years
C8&Above
G&Above
PG&Above
:8yearsandup
14+
:
18+
:
Canadian
-
Canadian
categories (Optional) Canadian Rating System
are provided by broadcast station. Most television programs and television
be blocked by TV rating and/or individual categories.
rating
Rating guidelines
movies
-
:
:
General audience
Parental guidance suggested
14 years and up
Adult
PARENTAL
Francais
MPAA
Age
Block
-
Unblocked
Francais
G&Above
Content Block
8 ans+
Set Password
13 ans+
Lock On/Off
16 ans+
Canadian
18
MOVIE Ratings
-
English
Unblocked
G&Above
:
:
General audience
-8ans+
:8yearsandup
-13ans+
:
-16ans+
:
-18ans+
:
13 years and up
16 years and up
18 years and up
A29
ans+
Only)
Closed
Captions
Optional
-
Closed captioning is a process which converts the audio portion of a television program into written
words which then appear as subtitles on the television screen. Closed captions allow viewers to read
the
dialogue and narration of television programs.
Using
Closed
Captions
dialogue and narration of television programs. For prerecorded
programs, program dialogue can be arranged into captions in advance. It is possible to caption a live
program by using a process called real-time captioning, which creates captions instantly. Real-time
captioning is normally done by professional reporters using a machine shorthand system and computer
for translation into English.
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching language
Captions
are
the subtitles of the
skills.
Caption Tips
1.
Not all TV broadcasts include closed
2. Sometimes
caption signals.
TV stations broadcasts four different
caption signals on the same channel. By selecting
TEXT4 you can choose which signal you view CC1 is usually the signal
From CC1
CC4, TEXT1
with the captions, while Another mode might show demonstration or programmimg information.
~
3.
Your TV
Poor
might
not receive
reception conditions
IGNITION
-
~
caption signals normally
are
encountered
in the
following situations.
:
:
Picture may flutter, drift, suffer from black spots, or horizontal streaking. Usually caused by
interference from automobile ignition systems, neon lamps, electrical drills, and other electrical
appliances.
GHOSTS
-
Ghosts
:
signal splits and follows two paths. One is the direct path and the
other is reflected off tall buildings, hills or other objects. Changing the direction or position of the
antenna may improve reception.
are
caused when the TV
-SNOW:
If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred
small dots. It may be necessary to install a special antenna to improve the picture.
An
old, bad
illegally recorded tape is playing.
Strong, random signals from a car or airplane interfere with the TV signal.
The signal from the antenna is weak.
The program wasn't captioned when it was produced, transmitted, or taped.
or
by
and
Selecting
the
Screen
Adjusting
Adjusting Screen CLOCK/PHASE
ARC
To select the
image
size of the
<AV / S-Video / Component
*
Auto-
configure
Clock
When the component 1
1,
2
and Position
screen.
<RGB PC / DVI PC input only>
input only>
input signal is 720p
or
1080i, the spectacle function is
This button is for the automatic adjustment of the
This function is suitable for analoge singnal input
not
supported.
position, clock and phase.
only(RGB PC input only).
screen
To minimize any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is suitable for analoge singnal input only(RGB
PC input only).
Phase
To
adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters. This function is suitable for analoge
singnal input only(RGB PC input only).
To
adjust position of the screen
(RGB PC input only).
Press the
button to display the submenu for
position.
Position
Left
Right
Up
Down
A31
Moving the screen position horizontally.
Moving the screen position vertically.
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
ENGLISH
On/Off
PIP
selecting PIP in the
the following menu items
After
PIP On/Off menu,
can be adjusted.
POP
selecting POP in the POP On/Off menu,
the following menu items can be adjusted.
After
PBP
selecting PBP in the PBP On/Off menu,
the following menu items can be adjusted.
After
Source
To select
Size
To
Image
To
an
input signal for PIP/POP/PBP.
adjust the size of the PIP/POP/PBP screen. (PIP : Small, Medium, Large
/ PBP
:
Full, 4:3)
button to display the
adjust the image of the PIP/POP/PBP screen; Press the
submenu for PIP/POP/PBP image. Use the
buttons to adjust the item to the desired
level. The items of the sub-menu may vary depending on the type of the source.
Contrast
Adjust PIP/POP/PBP
screen contrast.
Brightness
Adjust PIP/POP/PBP
screen
brightness.
Color
Adjust
the PIP/POP/PBP screen color.
Tint
To adjust the tint to desired level.
This function is available only in NTSC
*
The sub-menu
signal.
Sound
To turn the PIP/POP/PBP sound on/off.
A32
can
differ
according
broadcasting
to the
mode.
type of the input
and
Selecting
the
Screen
Adjusting
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
adjust the position
to PIP screen.
Position
To
Swap
To switch the main-screen and subscreen
PIP
SWAP
POP
SWAP
PBP
A33
in PIP/POP/PBP mode.
the
Controlling
Multiple
Monitors
single PC.
by connecting them
Use this method to connect several monitors to
You
can
control several monitors at
Connecting
The RS-232C
time
protocol)
a
to a
single PC.
the cable
Connect the RS-232C cable
*
a
(RS-232C
protocol
turn the monitor
as
shown in the
picture.
is used for communication between the PC and monitor. You
on/off, select
an
input
source or
RS-232C Cable
(not included)
PC
Monitor
Communication Parameter
G Baud Rate : 9600bps (UART)
G Data Length : 8bits
G Parity Bit : None
G Stop Bit : 1bit
G Flow Control : None
G Communication Code : ASCII code
A34
adjust
the OSD
menu
can
from your PC.
ENGLISH
the
Controlling
Multiple
Monitors
(RS-232C
Command Reference List
COMMAND1
COMMAND2
k
a
00H
k
b
00H
Ratio
k
c
01H
04. Screen Mute
k
d
00H
05. Volume Mute
k
e
00H
06. Volume Control
k
f
00H
07. Contrast
k
08.
k
g
h
00H
09. Color
k
i
00H
10. Tint
k
j
00H
11.
k
k
00H
12. OSD Select
k
l
00H
13. Remote Lock On/Off
k
m
00H
14. PIP/PBP/POP On/Off
k
n
00H
15. PIP Position
k
q
00H
16. Balance
k
t
17. ACC
18. PIP/PBP/POP SOURCE
k
k
u
y
00H
00H
00H
19. Auto
j
u
01H
m
c
Key Code
01. Power
02.
03.
20.
Select
Input
Aspect
Brightness
Sharpness
Configure
Key
Transmission /
Receiving
DATA(Hexa)
00H
Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]: First command. (j or k)
[Command 2]: Second command.
[Set ID]: You can adjust the set ID to choose desired monitor
ID number in Special menu. Adjustment range is 0
When selecting Set ID '0', every connected
99.
~
TV set is controlled. Set ID is indicated
as
decimal
(0~99)on menu and as Hexa decimal (0x0~0x64)
on transmission/receiving protocol.
*
[DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
*
[Cr]: Carriage
Return
ASCII code '0x0D'
*
[
]: ASCII code Space (0x20)'
A35
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
01H
08H
06H
01H
01H
64H
64H
64H
64H
64H
64H
01H
01H
03H
03H
64H
03H
08H
protocol)
Transmission /
OK
Protocol
Receiving
Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
this format when
receiving
computer.
Error
Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Monitor transmits ACK
this format when
functions
or
2:
3: Wait
01. Power
based
on
abnormal data from non-viable
receiving
communication
Illegal Code
Not supported
Data 1:
(acknowledgement)
errors.
function
time
more
On(Command
:
a)
G To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data0:PowerOff
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
this format when
receiving
computer.
A36
ENGLISH
the
Controlling
Transmission /
Multiple
Receiving
Monitors
Protocol
02.
Input Select(Command : b) (Main Picture Input)
G To select input source for the Set.
You can also select an input source using the SOURCE
button
on
the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
6:RGBPC
Data 2:AV
3
:
4
:
S-Video
Component
5 : Component
Acknowledgement
8:DVIPC
1
2
[b][ ][Set ID][ ][OK][Data][x]
03.
Aspect Ratio(Command
G To adjust the
screen
:
c) (Manin picure format)
format.
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
You
can
Screen
also
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data1:4:3
2:Full
3
:
Spectacle
4
:
Zooml
5
:
Zoom2
6
:
1:1(PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A37
(RS-232C
protocol)
Transmission /
04. Screen
G To select
Mute(Command
screen
Protocol
Receiving
:
ENGLISH
d)
mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0
:
Screen mute off
1
:
Screen mute
on
(Picture on)
(Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume
Mute(Command
:
e)
G To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0
:
Volume Mute On
1
:
Volume Mute
(Volume Off)
Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0
:
Volume Mute On
1
:
Volume Mute
06. Volume
(Volume Off)
Off (Volume On)
Control(Command : f)
G To adjust Volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A38
the
Controlling
Transmission /
07.
You
screen
also
can
Protocol
Receiving
Contrast(Command
G To adjust
Multiple
:
Monitors
g)
contrast.
adjust
the contrast in the Picture
menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
?Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step0
:
A:Step10
:
F:Step15
10:Step16
:
64
:
08.
Step
100
Brightness(Command
G To adjust
You
:
h)
brightness.
adjust the brightness
screen
also
can
in the Picture
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
?Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step
:
A:Step10
:
F:Step15
10:Step16
:
64
:
Step
100
A39
menu.
(RS-232C
protocol)
Transmission /
Receiving
Protocol
09.
Color(Command : i) (AV only)
GTo adjust the screen color.
You can also adjust the color in the
Picture
menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
10.
Tint(Command : j) (AV-NTSC only)
GTo adjust the screen tint.
You can also adjust the tint in the Picture
menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red: 00H
Green: 64H
~
(Hexadecimal code)
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red: 00H
Green: 64H
~
*Tint:-50~+50
A40
ENGLISH
the
Controlling
Transmission /
Multiple
Receiving
Monitors
Protocol
11.
Sharpness(Command : k) (AV only)
GTo adjust the screen Sharpness.
You can also adjust the sharpness in the
Picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
12. OSD
Select(Command
GTo
:
l)
control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0:OSDOff
1:OSDOn
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0:OSDOff
13. Remote Lock
GTo
1:OSDOn
On/Off(Command
:
m)
control Remote Lock on/off to the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
Remote Lock Off
1
:
Remote Lock On
1
:
Remote Lock On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0
:
Remote Lock Off
A41
(RS-232C
protocol)
Transmission /
14. PIP/PBP/POP
Receiving
Protocol
On/Off(Command
:
n)
G To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data0:OFF
1:PIP
2:PBP
3:POP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data0:OFF
1:PIP
2:PBP
3:POP
15. PIP
Position(Command
:
q)
G To adjust PIP position.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0
:
1
:
2
:
3
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0
:
1
:
2
:
3
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
A42
ENGLISH
the
Controlling
Transmission /
Multiple
Receiving
Protocol
16.
Balance(Command : t)
GTo adjust the sound Balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
*
Min:00H~Max:64H
Balance
:
-50
+50
~
17.
ACC(Command : u)
GTo adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0
Normal
:
(9300K)
2
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0
Normal
:
(9300K)
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
18. PIP/PBP/POP
GTo
2
SOURCE(Command
select the sub-screen
:
y)
source.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data2:AV
3
:
S-Video
4:Component1
5
:
Component
2
6:RGBPC
8:DVIPC
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
Data2:AV
3
:
S-Video
4:Component1
5
:
Component
2
6:RGBPC
8:DVIPC
A43
Monitors
(RS-232C
protocol)
Transmission /
19. Auto
Receiving
Protocol
Configure(Command: j u)
GTo adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data1:Toset
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20.
Key(Command : m c)
GTo send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
Key
code
:
Refer to page 46.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A44
ENGLISH
G Connect your wired remote control to Remote Control port
G Output waveform
single pulse, modulated
with 37.917KHz
signal
on
the Monitor.
at 455KHz
Tc
Carrier frequency
FCAR
T1
1/Tc
=
Duty ratio
=
=
fosc/12
T1/Tc
=
1/3
G Configuration of frame
?1st frame
Lead
code
Low
custom code
High
Data code
custom code
Data code
C0C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?Repeat frame
Repeat code
Tf
G Lead code
9ms
4.5ms
0.55ms
G Repeat code
9ms
2.25ms
G Bit description
?Bit "0"
?Bit "1"
0.56ms
0.56ms
1.12ms
G Frame interval
:
2.24ms
Tf
?The waveform is transmitted
as
long
as a
key is depressed.
Tf
Tf
Tf=108ms@455KHz
Function
Note
(D)
(E)
R/C Button
VOL(G)
VOL(F)
R/C Button
08
POWER ON/OFF
R/C
C4
POWER ON
Discrete IR
Code(Only
Power
On)
C5
POWER OFF
Discrete IR
Code(Only
Power
Off)
09
MUTE
R/C Button
10
Number
Key
0
R/C Button
11
Number
Key
1
R/C Button
12
Number
Key
2
R/C Button
13
Number
Key
3
R/C Button
14
Number
Key
4
R/C Button
15
Number
Key
5
R/C Button
16
Number
Key
6
R/C Button
17
Number
Key
7
R/C Button
18
Number
Key
8
R/C Button
19
Number
Key
9
R/C Button
0B
AV
R/C Button
98
SOURCE
R/C Button
5A
AV
Discrete IR
Code(Input
AV
D8
S-Video
Discrete IR
Code(Input S-video Selection)
BF
Component
1
Discrete IR
Code(Input Component
1
Selection)
D4
Component
2
Discrete IR
Code(Input Component
2
Selection)
C6
DVI
Discrete IR
Code(Input
D5
RGB
Discrete IR
Code(Input RGB Selection)
0E
SLEEP
R/C Button
43
MENU
R/C Button
44
SET
R/C Button
60
PIP
R/C Button
63
SWAP
R/C Button
79
ARC
R/C Button
76
ARC(4:3)
Discrete IR
Code(Only
4:3
77
ARC(Full)
Discrete IR
Code(Only
Full
AF
ARC(ZOOM)
Discrete IR
Code(Only
Zoom
39
CAPTION
R/C Button
99
AUTO CONFIG
Discrete IR Code
Code(Hexa)
00
01
02
03
R/C Button
R/C Button
Button(Power On/Off)
Selection)
DVI
Selection)
mode)
mode)
mode)
Troubleshooting
No
image
Is the monitor power cord connected?
Is the power indicator
light
is
on?
Power is on, power indicator is green
but the screen appears extremely dark.
Is the power indicator amber?
?
?
?
?
displayed
See if the power cord is
outlet.
See if the power switch is turned
Adjust brightness (
range' message
?
appear?
signal
cable' message
?
?
on.
and contrast
(
saving mode,
) again.
move
the
key.
press any
signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
monitor. Adjust the frequency range by referring
to the Specifications in this manual.
Maximum resolution
RGB PC
:
DVI PC
1360
The
:
signal
1600
x
x
1200 @60Hz
768 @60Hz
cable between PC and monitor is not
connected. Check the
appear?
to the
The
*
Does the 'Check
)
If the monitor is in power
mouse or
Does the 'Out of
properly connected
Press the 'SOURCE'
signal
menu
controller to check the
cable.
in the remote
input signal.
'Unknown Monitor' message appears when the monitor is connected.
Did you install the driver?
?
Install the monitor driver, which is provided with
the monitor, or download it from the web site.
(http://www.lge.com)
?
See if the
referring
plug&play function
is
supported by
to the video card user manual.
'Controls locked' message appears.
The 'Controls locked' message
appears when pressing the Menu
button.
Note
*
*
?
The control
locking function prevents unintentional
OSD setting change due to careless usage. To unlock
the controls, simultaneously press the Menu button
and G button for several seconds. (You cannot set
this function using the remote controller buttons. You
can set this function in the monitor only.)
Vertical frequency: To enable the user to watch the monitor display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A47
Is the
screen
position wrong?
?
D-Sub
analog signal
Press the "AUTO" button in
--
the remote controller to
optimal
screen
mode. If
?
status that fits into the current
adjustment
Position OSD
automatically select the
is not
satisfactory,
use
the
menu.
See if the video card resolution and
supported by the
monitor.
frequency are
If the frequency is out of
range, set to the recommended resolution in the
Control Panel Display Setting menu.
--
Do thin lines appear on the
background screen?
?
D-Sub analog signal Press the "AUTO" button
in the remote controller to automatically select an
--
optimal
screen
mode. If
or
the
?
D-Sub
screen
in the
automatically select an
is not
satisfactory,
use
the
menu.
?SeeiftheZoomvalueissetto0.Ifitis,you
cannot adjust the H/V Position value.
adjusted
?
If the
PC,
screen
Brightness
differs in the main and
screen
?
size is not full when connected to the
execute the PIP/POP/PBP to
screen
change to full
mode.
You cannot
adjust brightness and
PIP/POP/PBP Screen
when connected to the
menu
tint in the
for the sub-screen
among PIP/POP/PBP menus. Therefore,
brightness can be different for the sub-screen.
PC.
The
the
menu.
Screen size is automatically
when connected to the PC.
sub
use
status that fits into the current
adjustment
Phase OSD
Unable to
satisfactory,
Press the "AUTO" button
--
in the remote controller to
mode. If
Zoom
is not
menu.
analog signal
optimal
adjust the
horizontal/vertical position
status that fits into the current
adjustment
Clock OSD
Horizontal noise appears
characters look blurred.
--
screen
is
displayed abnormally.
?
The proper
input signal
is not connected to the
signal port. Connect the signal
with the source input signal.
After-image appears when the
monitor is turned off.
?
cable that matches
If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screensaver
function.
No sound?
?
?
?
No sound is available when the
PIP/POP/PBP mode is
engaged.
Sound is too dull.
screen
menu
?
size function in the OSD
properly.
Adjust the volume.
See if the sound is set
properly.
See if the Sound is set to On in the PIP/POP/PBP
menu.
?
Sound is too low.
The
?
See if the audio cable is connected
?
does not work.
Select the
appropriate equalize
sound.
Adjust the volume.
See if the PIP/POP/PBP function is in use. If the
PIP/POP/PBP function is in use, the screen size
function may not work.
Screen has poor color resolution
?
(16 colors).
Set the number of colors to
than 24 bits
(true
color)
Select Control Panel
Table
Screen color is unstable
colored.
Do black spots appear
screen?
more
or mono-
on
the
?
?
menu
Display
--
--
Settings
signal
cable.
green, white or black
the screen, which can be
color)
pixels (red,
may appear on
attributable to the
LCD
panel.
Color
in Windows.
Check the connection status of the
Or, re-insert the PC video card.
Several
--
unique
It is not
a
characteristics of the
malfunction of the LCD.
Specifications
The
product specifications
change
can
without
notice for
prior
product improvement.
LCD Panel
Power
(80.04 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 80.04 cm
0.5025 mm (Pixel Pitch)
[L3200A]
32 inches
[L3700A]
37 inches
[L4200A]
42 inches
(94.03 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 94.03 cm
0.6000 mm (Pixel Pitch)
(106.68 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Anti-Glare coating
Visible diagonal size: 106.68 cm
0.681 mm (Pixel Pitch)
[L3200A]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.0A
On Mode
Sleep
Mode
Off Mode
:
160W
:≤4W
:≤2W
[L3700A]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.4A
On Mode
Sleep
Mode
Off Mode
:
220W
:≤4W
:≤3W
[L4200A]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.8A
On Mode
Sleep
Mode
Off Mode
:
300W
:≤4W
:≤3W
NOTE
Information in this document is
subject to change without
A50
notice.
ENGLISH
Specifications
The
product specifications
change
can
without
prior
notice for
[2]
[1]
Dimensions
product improvement.
&Weight
H
H
W
D
W
D
[4]
[3]
H
H
D
W
Width
x
Height
W
x
Depth
[L3200A]
[1] 80.30 cm (31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
[2] 80.30 cm (31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[3] 96.40 cm (37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
[4] 96.40 cm (37.95 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[L3700A]
[1] 92.80 cm (36.54 inches) x 61.90 cm
[2] 92.80 cm (36.54 inches) x 57.12 cm
[3] 112.9 cm (44.45 inches) x 61.90 cm
[4] 112.9 cm (44.45 inches) x 57.12 cm
(24.37 inches) x 22.77 cm (8.96 inches)
(22.49 inches) x 12.00 cm (4.72 inches)
(24.37 inches) x 22.77 cm (8.96 inches)
(22.49 inches) x 12.00 cm (4.72 inches)
[L4200A]
[1]
[2]
[3]
[4]
105.7 cm
(41.61 inches) x 70.20 cm
105.7 cm (41.61 inches) x 65.30 cm
125.9 cm (49.57 inches) x 70.20 cm
125.9 cm (49.57 inches) x 65.30 cm
(27.64 inches) x 29.45 cm (11.59 inches)
(25.71 inches) x 11.91 cm (4.69 inches)
(27.64 inches) x 29.45 cm (11.59 inches)
(25.71 inches) x 11.91 cm (4.69 inches)
Net
[L3200A]
[1] 19.4 kg (42.77 lbs)
[3] 21.1 kg (46.52 lbs)
[2]
[4]
16.0
kg (35.27 lbs)
17.7 kg (39.02 lbs)
[L3700A]
[1] 31.1 kg (68.56 lbs)
[3] 39.1 kg (86.20 lbs)
[2] 29.0 kg (63.93 lbs)
[4] 35.1 kg (77.38 lbs)
[L4200A]
[1] 41.4 kg (91.27 lbs)
[3] 44.0 kg (97.00 lbs)
[2] 37.0 kg (81.57 lbs)
[4] 39.6 kg (87.30 lbs)
A51
D
The
product specifications
Video
Signal
change
can
without
Max. Resolution
notice for
prior
product improvement.
RGB PC
:
DVI PC
1360 X 768 @60Hz
:
1600 X 1200 @60Hz
--
It may not be
supported
depending on the OS or video card type.
Recommended Resolution
RGB PC
:
WXGA 1360 X 768 @60Hz
DVIPC:WXGA1360X768@60Hz--Itmaynotbe
supported depending
Horizontal
RGB PC
Frequency
:
30
on
the OS
or
video card type.
83 kHz
-
DVIPC:30-72kHz
Vertical
56
Frequency
Synchronization Type
Conditions
*
Applicable only
Separate/Composite/SOG (Sync On Green)/Digital
Operational Condition Temperature: 10˚C 35˚C Humidity: 10%
Storage Condition
Temperature: -20˚C 60˚C Humidity: 5%
~
,
~
,
for models that support the
RMS Audio
Audio
85 Hz
15-pin DSUB type, DVI-D (digital), S-Video,
Composite Video, HDTV, DVD
Input Connector
Environmental
-
Output
Input Sensitivity
Speaker Impedance
speakers
10W+10W(R+L)
0.7Vrms
8Ω
NOTE
Information in this document is
subject to change without
A52
notice.
80%
~
95%
~
ENGLISH
Specifications
PC Mode
--
Preset Mode
Preset mode
1
23456789
Frequency
(kHz)
Frequency
(Hz)
Vertical
Frequency Frequency
(kHz)
(Hz)
Preset mode
VGA
640
x
350
31.469
70
11
VESA 1024
x
768
60.123
75
VGA
720
x
400
31.468
70
12
VESA 1024
x
768
68.68
85
VGA
640
x
480
31.469
60
13
VESA 1280
x
720
44.772
60
VESA 640
VESA 640
x
480
37.500
75
14
VESA 1360
x
768
47.72
60
x
480
43.269
85
15
VESA 1280
x
1024
63.981
60
VESA 800
VESA 800
x
600
37.879
60
16
VESA 1280
x
1024
79.98
75
x
600
46.875
75
17
VESA 1600
x
1200
75.00
60
VESA 800
MAC
832
x
600
53.674
85
x
624
49.725
75
RGBPC:Mode1~Mode17
48.363
60
DVIPC:Mode1~Mode15
VESA 1024
10
Vertical
Horizontal
Horizontal
x
768
Power Indicator
Mode
Monitor
On Mode
Sleep
Green
Mode
Amber
Off Mode
-
VESA wall
mounting
Connected to another
object (stand type and wall-mounted type. This
monitor accepts a VESA-compliant mounting interface pad.- optional)
For further information, refer to the VESA Wall Mounting Instruction
Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased separately
computer
stores
A53
at most
Download PDF