Owner's Manual IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 29UM59A www.lg.com WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. 2 Contents CONTENTS ENGLISH ENG 3 LICENSE 18 USER SETTINGS 4 ASSEMBLING AND PREPARING 18 18 19 19 4 5 6 6 7 8 9 9 10 10 11 12 13 13 Product Components Supported Drivers and Software Component and Button Description - How to Use the Joystick Button Input Connector Moving and Lifting the Monitor Installing the Monitor - Assembling the stand base - Using the cable holder - Installing onto a table - Adjusting the angle - Using the Kensington lock - Installing the wall mount plate - Installing to a wall 15 USING THE MONITOR 15 15 16 16 16 17 17 Connecting to a PC - HDMI connection - USB-C connection Connecting to AV Devices - HDMI connection Connecting to External Devices - Connecting Headphones Activating the Main Menu - Main Menu Features User Settings - Menu Settings 23 TROUBLESHOOTING 25SPECIFICATIONS 25 26 26 26 26 29UM59A Factory Support Mode (Preset Mode, PC) HDMI / USB-C HDMI / USB-C Timing (Video) Power LED LICENSE 3 LICENSE The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive: * This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display. * To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”. ENG ENGLISH Each model has different licenses. Visit www.lg.com for more information on the license. 4 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Product Components Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. or CD(Owner's Manual) / Card Power Cord AC-DC Adapter ( Depending on the country ) HDMI Cable USB C-C cable ( This cable is not included in all countries. ) ( This cable is not included in all countries. ) Stand Body Stand Base Cable Holder AC-DC Adapter ( Depending on the country ) Screw Cover 2 Screws CAUTION Always use genuine components to ensure safety and product performance. yy The product warranty will not cover damage or injury caused by the use of counterfeit components. yy It is recommend that use the supplied components. yy If you use generic cables not certified by LG, the screen may not display or there may be image noises. yy NOTE Note that the components may look different from those shown here. yy Without prior notice, all information and specifications in this manual are subject to change to improve the yy performance of the product. To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store yy where you purchased the product. ASSEMBLING AND PREPARING 5 Supported Drivers and Software Drivers and Software Installation Priority 29UM59A Monitor Driver Recommended O OnScreen Control Recommended O Optional O Dual Controller Required and Recommended: You can download and install the latest version from the enclosed CD or from the yy LGE website (www.lg.com). Optional: You can download and install the latest version from the LGE website (www.lg.com). yy ENG ENGLISH Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package. 6 ASSEMBLING AND PREPARING Component and Button Description ENGLISH ENG Joystick Button Power LED yyOn: power is on yyOff: power is off How to Use the Joystick Button You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor. Volume Control You can control the volume by moving the joystick button left/right. NOTE yy The joystick button is located at the bottom of the monitor. ASSEMBLING AND PREPARING 7 Input Connector ENG ENGLISH 8 ASSEMBLING AND PREPARING Moving and Lifting the Monitor ENGLISH ENG When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. CAUTION As far as possible, avoid touching the monitor yy screen. This may result in damage to the screen or some of the pixels used to create images. It is advisable to place the monitor in the original yy box or packing material before attempting to move it. Before moving or lifting the monitor, disconnect yy the power cord and all cables. Hold the top and bottom of the monitor frame yy firmly. Do not hold the screen itself. If you use the monitor panel without the stand yy base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction. When holding the monitor, the screen should face yy away from you to prevent it being scratched. When moving the monitor, avoid any strong shock yy or vibrations to the product. When moving the monitor, keep it upright, never yy turn the monitor on its side or tilt it sideways. ASSEMBLING AND PREPARING 9 Installing the Monitor 1 Place the screen face down. 3 1 Attach the Stand Base to Stand Body. 2 Tighten the screw to the right. Stand Body Stand Base CAUTION To protect the screen from scratches, cover the yy surface with a soft cloth. 4 Attach the screw cover. 2 Check the direction of the stand body (front, back) and then mount the stand body onto the stand hinge. Stand Body Stand Hinge CAUTION Applying excessive force when tightening the screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. CAUTION It may hurt your foot off the stand, so be careful. NOTE You can disassemble the stand in the reverse yy order of the assembly. ENG ENGLISH Assembling the stand base 10 ASSEMBLING AND PREPARING ENGLISH ENG Using the cable holder Installing onto a table Arrange the cables using the cable holder as shown in the illustration. 1 Lift the monitor and place it on the table in an upright position. Place at least 3.94 inches away from the wall to ensure sufficient ventilation. 3.94 inches 3.94 inches 3.94 inches 3.94 inches cable holder 2 Connect the Power cord to the monitor, then plug the power cord into the wall outlet. or 3 Press the joystick button on the bottom of the monitor to turn on the monitor. CAUTION Unplug the power cord prior to moving or installyy ing the monitor. There is risk of electric shock. ASSEMBLING AND PREPARING Cautions When Connecting Power Cord 11 Adjusting the angle on the stand base. 2 Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience. 100-240 V~ 20° -5° Make sure to use the power cord that is proyy vided in the product package and connect it to a grounded power outlet. If you need another power cord, please contact yy your local dealer or the nearest retail store. Rear Side Front Side WARNING To avoid injury to the fingers when adjusting the yy screen, do not hold the lower part of the monitor's frame as illustrated below. Be careful not to touch or press the screen area yy when adjusting the angle of the monitor. ENG ENGLISH 1 Place the monitor in an upright position, mounted 12 ASSEMBLING AND PREPARING Using the Kensington lock ENGLISH ENG The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. NOTE Use of the Kensington lock is optional. yy The accessories can be purchased at your local electronics store. NOTE The left or right side of the monitor head can be yy slightly rotated up or down (up to 3°). Adjust the horizontal level of the monitor head. Monitor head ASSEMBLING AND PREPARING 13 Installing to a wall This monitor supports the specification of the standard wall mount plate or compatible device. Install the monitor at least 3.94 inches away from the wall and leave about 3.94 inches of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Place the wall mount plate onto the monitor and align it with the screw holes. 3 Tighten the four screws to fix the plate to the monitor using a screwdriver. 3.94 inches NOTE The wall mount plate is sold separately. yy For more information on installation, refer to the yy wall mount plate's installation guide. Be careful not to use excessive force when yy mounting the wall mount plate, as this can damage the monitor's screen. 3.94 inches 3.94 inches 3.94 inches To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. 1 If you use screw longer than standard, the monitor might be damaged internally. 2 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. Wall Mount (A x B) Standard screw Number of screws Wall Mount Plate (Optional) 75 x 75 M4 x L10 4 RW120 ENG ENGLISH Installing the wall mount plate 14 ASSEMBLING AND PREPARING Wall Mount (A x B) yy NOTE ENGLISH ENG A B CAUTION Unplug the power cord before moving or installyy ing the monitor to avoid electric shocks. Installing the monitor on the ceiling or on a yy slanted wall may result in the monitor falling off, which could lead to injury. Please use the genuine LG wall mounting bracket. For more information, contact your local retail store or a qualified installer. Applying excessive force when fastening screws yy may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. Use the wall mounting bracket and screws yy that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. Screw length from outer surface of back cover yy should be under 8mm. Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw Max.8mm Use the screws specified by the VESA standard. yy The wall mount kit includes the installation guide yy and all necessary parts. The wall mounting bracket is optional. The accesyy sories can be purchased at your local retail store. The length of the screw may differ for each wall yy mounting bracket. Ensure the correct length screw is used. For more information, please refer to the user yy manual for the wall mounting bracket. USING THE MONITOR 15 USING THE MONITOR This monitor supports the *Plug and Play feature. yy *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers. HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. NOTE If you use HDMI PC, it can cause compatibility yy problem. Use a certified cable with the HDMI logo attached. yy If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types yy - High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet ENG ENGLISH Connecting to a PC 16 USING THE MONITOR ENGLISH ENG USB-C connection Connecting to AV Devices Transmits digital video and audio signals from your PC to the monitor. Connect the monitor to your PC using the USB-C cable as shown in the illustration below. Press the menu button and then select the input option from the input menu. HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. (USB C-C cable) NOTE yy DP Alternate Mode(DP over USB-C) are supported via USB-C Port. yy Features may not work properly depending on the connected device’s specifications and the environment. yy USB-C port doesn’t provide power to the Monitor. Use the Adapter supplied with the Monitor. NOTE Use a certified cable with the HDMI logo attached. yy If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types yy - High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet USING THE MONITOR 17 Connecting to External Devices Connect peripherals to the monitor via the headphones port. Connect as illustrated. (sold separately) (sold separately) NOTE yy Peripheral devices are sold separately. yy If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones. Angled Straight yy Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited. ENG ENGLISH Connecting Headphones 18 User Settings USER SETTINGS ENGLISH ENG Activating the Main Menu 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button once more to exit the main menu. Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.) ◄ ► ▲ ▼ Main menu disabled Adjusts the monitor volume level. Main menu enabled Enters the Input feature. Main menu disabled Adjusts the monitor volume level. Main menu enabled Enters the Menu features. Main menu disabled Displays information on the current input. Main menu enabled Turns off the monitor. Main menu disabled Displays information on the current input. Main menu enabled Enters the Game Mode features. Main Menu Features Main Menu Power Off Power Off Input Input Exit Power Off Game Mode Input Exit Menu Game Mode Exit Menu Power Off Game Mode Input Exit Game Mode Menu Menu Description Menu Configures the screen settings. Game Mode You can change Picture Mode to a gaming mode. Input Sets input mode. Power Off Turns off the monitor. Exit Exits the main menu. User Settings 19 User Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Configure the options by moving the joystick up/down/left/right. 3 To return to the upper menu or set other menu items, move the joystick to◄ or pressing ( / Ok) it. 4 If you want to exit the OSD menu, move the joystick to ◄ until you exit. yy When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen. Quick Settings Input Picture General CAUTION yy Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual. Each option is described below. Menu > Quick Settings Brightness Contrast Volume Description Adjusts the color contrast and brightness of the screen. Adjusts the volume level. NOTE yy You can adjust Mute / Unmute by moving the joystick button to▼in the Volume menu. Menu > Input Description Input List Selects the input mode. Aspect Ratio Adjusts the aspect ratio of the screen. Full Wide Displays the video in wide-screen, regardless of the video signal input. Original Displays video according to the aspect ratio of the video signal input. Cinema1 Enlarges the screen with an aspect ratio of 21:9. (at 1080p) Cinema2 Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for subtitles. (at 1080p) NOTE yy The display may look the same for Full Wide , Original at the recommended resolution (2560×1080). yy There is no Cinema1, Cinema2 menu on FreeSync Mode. ( Go to Picture → Game Adjust → FreeSync, to set FreeSync On or Off) Menu > Picture Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu. Photo Optimizes the screen for photos. ENG ENGLISH Menu Settings 20 User Settings Picture Mode Cinema Optimizes the screen for video. ENGLISH ENG Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors. FPS Game 1 This mode is optimized for FPS games. FPS Game 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games. RTS Game This mode is optimized for RTS Game. Custom (Game) In this mode, users can customize various elements including game-related options. NOTE yy If the picture mode is changed in the screen may flicker or the resolution of your PC screen may be affected. Picture Adjust Brightness Adjusts the brightness of the screen. Contrast Adjusts the contrast of the screen. Sharpness Adjusts the sharpness of the screen. SUPER RESOLUTION+ High Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality video or game. Middle The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing. It is effective for UCC or SD video. Low The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for slow-moving pictures or still images. Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode. NOTE yy Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for normal text or for desktop icons. Doing so may result in unnecessarily high sharpness. Black Level DFC Game Adjust Response Time FreeSync Sets the offset level (for HDMI only). yy Offset: as a reference for a video signal, this is the darkest color the monitor can display. High Keeps the current contrast ratio of the screen. Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen. On Adjusts the brightness automatically according to the screen. Off Disables the DFC feature. Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use Fast. Setting to Fast may cause image sticking. Fast Sets the response time to Fast. Normal Sets the response time to Normal. Slow Sets the response time to Slow. Off Does not use the response time improvement feature. Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal. CAUTION yy Supported Interface: HDMI. yy Supported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary. yy Supported Version : Make sure to update the graphic card to the latest driver. yy For more information and requirement, refer to AMD website at http://www. amd.com/FreeSync On FreeSync function on. Off FreeSync function off. User Settings Game Adjust 21 You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen. Cross Hair Cross Hair provides a mark on the center of the screen for First Person Shooter(FPS) games. Users can select the cross hair that fits their gaming environment among four different cross hairs. yy When the monitor is off or enters energy saving mode, the Cross Hair feature is automatically turned Off. Color Adjust Gamma Color Temp Red Mode 1, Mode The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. 2, Mode 3 Mode 4 If you do not need to adjust the gamma settings, select Mode 4. Custom The user can adjust it to red, green, or blue by customization. Warm Sets the screen color to a reddish tone. Medium Sets the screen color between a red and blue tone. Cool Sets the screen color to a bluish tone. You can customize the picture color using Red, Green, and Blue colors. Green Blue Six Color Picture Reset Meets the user requirements for colors by adjusting the hue and saturation of the six colors (Red, Green, Blue, Cyan, Magenta and Yellow) and then saving the settings. Hue Adjusts the tone of the screen colors. Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated and darker the colors become. Do you want to reset your settings? Yes Reset No Cancel ENG ENGLISH Black Stabilizer 22 User Settings Menu > General Description ENGLISH ENG Language Sets the menu screen to the desired language. SMART ENERGY SAVING High Saves energy using the high-efficiency SMART ENERGY SAVING feature. Low Saves energy using the low-efficiency SMART ENERGY SAVING feature. Off Disables the SMART ENERGY SAVING feature. Power LED Turns the power LED on the front of the monitor on. On The power LED turns on. Off The power LED turns off. Automatic Standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H) DisplayPort 1.2 Enables or disables DisplayPort 1.2. NOTE yy Be sure to configure this option according to the DisplayPort version supported by your graphics card. Set this option to Disable if your graphics card does not support DisplayPort 1.2. OSD Lock This feature disables the configuration and adjustment of menus. On Enables OSD Lock. Off Disables OSD Lock. NOTE yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in General and the Exit button. Reset Do you want to reset your settings? No Cancel the select. Yes Returns to the default settings. NOTE yy Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source. TROUBLESHOOTING 23 TROUBLESHOOTING Is the monitor's power cord plugged in? Check if the power cord is correctly plugged into the power outlet. yy Is the power LED on? Check the power cable connection and press the power button. yy Check that the connected input is enabled (Menu >Input > Input list). yy Is the power on and the power LED displaying white? Is the power LED blinking? Is the OUT OF RANGE message being displayed? Is the No Signal message being displayed? If the monitor is in sleep mode, move the mouse, or press any key on the yy keyboard, to switch the display on. Check if the computer is turned on. yy This occurs when signals transferred from the PC (graphics card) are out yy of the horizontal or vertical frequency range of the monitor. Please see the Product Specification section of this manual to set the appropriate frequency. This is displayed when the signal cable between the PC and the monitor is yy missing or disconnected. Check the cable and reconnect it. The OSD lock message is being displayed. Are some functions not avail-able when you press the Menu button? The OSD is locked. Go to Menu > General and set OSD Lock to Off. yy The screen retains an image. Does image sticking occur even when the monitor is turned off? Displaying a still image for a prolonged time may cause damage to the yy screen, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver. yy Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails. Did you select the appropriate resolution? If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen yy may be flickering. Change the resolution to 1080P or the recommended resolution. NOTE yy Vertical frequency In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz. yy Horizontal frequency The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is represented by kHz. ENG ENGLISH Nothing is displayed on the screen. 24 TROUBLESHOOTING NOTE ENGLISH ENG Check if the graphics card's resolution or frequency is within the range allowed by the monitor and set it to the yy recommended (optimal) resolution in Control Panel > Display > settings. Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed yy screen, a truncated display area, or misalignment of the display. The setting methods may be different depending on the computer or operating system, and some resolutions yy may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance. Some graphics cards may not support 2560×1080 resolution. If the resolution cannot be displayed, contact the yy manufacturer of your graphics card. The display color is abnormal. Does the display appear discol-ored (16 colors)? Set the color to 24 bit (true color) or higher. In Windows, go to Control yy Panel > Display > Settings > Color Quality. Does the display color appear unstable or monochrome? Check if the signal cable is connected properly. Reconnect the cable or yy reinsert the PC's graphics card. Are there spots on the screen? When using the monitor, pixilated spots (red, green, blue, white, or black) yy may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related to the monitor's performance. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? Be sure to install the display driver from the display driver CD (or diskette) yy that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. yy No sound from the headphone port or speaker. Are images displayed using DisplayPort or HDMI input without sound? Try increasing the volume using the button on the monitor. yy Set the audio output of the PC to the monitor you are using. On Microsoft yy Windows, go to Control Panel > Hardware and Sound > Sound > set the monitor as default device. SPECIFICATIONS 25 SPECIFICATIONS LCD Screen Resolution Video Signal Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Pixel Pitch 0.0876 mm x 0.2628 mm Maximum Resolution 2560×1080 @ 75Hz Recommended Resolution 2560×1080 @ 60Hz Horizontal Frequency 30 kHz to 90 kHz Vertical Frequency 56 Hz to 75 Hz Input Connector HDMI IN, H/P, USB-C Power input 19 V 2.0 A Power On mode: 23.3 W Typ. (ENERGY STAR® standard)* consumption (Typ.) 27 W Typ. (Outgoing condition)** Sleep Mode ≤ 0.5 W Off Mode ≤ 0.3 W AC/DC adaptor Type ADS-45SN-19-3 19040G, SHENZHEN HONOR ELECTRONIC production Or type LCAP21C, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP26B-E, LIEN CHANG ELECTRONIC ENTERPRISE production Output: 19 V 2.1 A Environmental Conditions Operating Condition Temperature: 0°C to 40°C; Humidity: < 80% Storing Condition Temperature: -20°C to 60°C; Humidity: < 85% Dimension Monitor Size (Width x Height x Depth) Weight (Without Packaging) With Stand 702.5 mm x 414 mm x 204.7 mm Without Stand 702.5 mm x 328.4 mm x 63.8 mm With Stand 5.4 kg Without Stand 4.8 kg The specifications are subject to change without notice. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard. ** The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution). ENG ENGLISH 29UM59A 26 SPECIFICATIONS Factory Support Mode (Preset Mode, PC) ENGLISH ENG HDMI / USB-C Resolution (HDMI / USB-C) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75.029 +/+ 1152 x 864 67.5 60 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1600 x 900 60 60 +/+ 1680 x 1050 65.29 59.954 -/+ 1920 x 1080 67.5 60 +/- 2560 x 1080 66.7 60 +/- 2560 x 1080 86.79 74.94 +/- HDMI / USB-C Timing (Video) Factory support mode (Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) 480p 31.5 60 576P 31.25 50 720p 37.5 50 720p 45.0 60 1080p 56.25 50 1080p 67.5 60 Power LED Mode LED Color On Mode White Sleep Mode Off Off Mode Off Remarks Remarks Declaration of Conformity Trade Name: LG Model : 29UM59A Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for technical support. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.