LG | 42LY541H | LG 42LY541H Owner’s Manual

OWNER’S MANUAL
LED TV
*Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV
and retain it for future reference.
LY33**
LY34**
LY54**
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
2
TABLE OF CONTENTS
33SPECIFICATIONS
3LICENSES
39
IR CODES
3
OPEN SOURCE SOFTWARE
NOTICE INFORMATION
40
EXTERNAL CONTROL DEVICE
SETUP
4
ASSEMBLING AND PREPARING
40
40
RS-232C Setup
Type of Connector:
D-Sub 9-Pin Male
RS-232C Configurations
Communication Parameters
Command Reference List
Transmission / Receiving Protocol
4Unpacking
6
Separate Purchase
7
Parts and Button
8
- Using the Joystick button
9
Lifting and Moving the TV
10
Setting up the TV
10
- Attaching the stand
13
Mounting on a table
16
Mounting on a wall
18
Tidying cables
19
MAKING CONNECTIONS
19
Antenna Connection
20Adapter Connection
20
Network Setup
20
- Wired network connection
21
Speaker Output Setup
22
Other Connections
28
REMOTE CONTROL
31MAINTENANCE
31
31
31
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
32TROUBLESHOOTING
41
42
42
43
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you
may be slightly injured or the product
may be damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC
and are used under license.
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274.”
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
ENGLISH
ENG
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
yy Use a certified cable with the HDMI logo attached.
yy If you do not use a certified HDMI cable, the screen may not display or a connection error may
occur. (Recommended HDMI Cable Types)
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ASSEMBLING AND PREPARING
5
ENGLISH
ENG
Remote control,
batteries (AAA)
(See p.28, 29, 30)
Owner’s manual
Cable Holder
(Depending on model)
Power cord
(Depending on model)
Stand Screws
4EA, M4 x L14
(Only 42/47/55/60LY34**,
42/47/55/60LY540*,
42/47/55LY541*)
(See p.10, 12)
Stand Screws
4EA, M4 x L20
(Only 32LY34**, 32LY540*,
42/47/55LY541*)
6EA, M4 x L20
(Only 32LY541*)
(See p.10, 11, 12)
Cable Managements
2EA
(Only LY34**, LY540*)
(See p.18)
Wall Mount Spacers
2EA
(Only 42LY34**, 42LY54**)
(See p.17)
Stand Bases
(Only LY34**, LY540*)
(See p.10)
or
AC-DC Adaptor
(Only LY33**)
(Depending on model &
country)
(See p.20)
Stand Base
(Only LY33**)
(Depending on model & country)
(See p.10)
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
Stand Base/Stand Body
(Only LY541*)
(See p.11, 12)
Power Cord Holder/Screw
1EA
(Only 42/47/55LY541*)
(See p.18)
Torx Plus Star-Head
Screws
2EA
(Only LY541*)
(See p.11, 12)
Rubbers
2EA
(Only LY541*)
(See p.13)
Washers for Stand Fixing
2EA
(Depending on model)
(See p.15)
Nuts for Stand Fixing
2EA
(Depending on model)
(See p.15)
Screws for Stand Fixing
2EA
(Depending on model)
(See p.15)
Separate Purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
LG Audio Device
ASSEMBLING AND PREPARING
7
A type : LY34**, LY540*
B type : 22/28LY33** (Except for India)
Screen
Screen
Speakers
Speakers
Remote control and
intelligent sensors1
(Only LY540H)
Power Indicator
2
Joystick button
Remote control sensor
Power Indicator
Joystick button2
C type : 22/28LY33** (Only India)
Screen
D type : LY541*
Screen
Speakers
Speakers
Remote Control Sensor
Power Indicator
Joystick Button2
Remote control and
intelligent sensors1
Power Indicator
Joystick button2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
ENGLISH
ENG
Parts and Button
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Joystick button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
Volume
Control
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.
NOTE
yy When your finger over the joystick button and push it to the up, down, left or right, be careful
not to press the joystick button. If you press the joystick button first, you may not be able to
adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( ,
,
TV off
Settings
Close
,
) moving the joystick button up, down, left or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
CAUTION
yy When handling the TV, be careful not to
damage the protruding joystick button.
(Depending on model)
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ENGLISH
ENG
Lifting and Moving the TV
9
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
(Only 22/28LY33**)
Image shown may differ from your TV.
Attaching the stand
1
(Only LY34**, LY540*)
1
1
2
A Stand Base
Stand Base
B Stand Base
2
2
M4 x L14
(Only
42/47/55/60LY34**,
42/47/55/60LY540*)
4EA M4 x L20
(Only 32LY34**,
32LY540*)
ASSEMBLING AND PREPARING
3
1
M4 x L20
2EA
4 EA
M4 x L20
or
Stand Body
Torx Plus Star-Head Screws
2EA
Tighten the two Torx head screws
(supplied with TV) with a Torx Bit Driver
(not supplied with TV).
Stand Base
2
ENGLISH
ENG
(Only 32LY541*)
11
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
(Only 42/47/55LY541*)
1
3
M4 x L14
4EA
4 EA
M4 x L20
or
Stand Body
M4 x L14
2EA
Torx Plus Star-Head Screws
2EA
Stand Base
2
Tighten the two of these four screws
and the two Torx screws (supplied with
TV) to secure the TV. Tighten the two
Torx screws with a Torx Bit Driver (not
supplied with TV).
ASSEMBLING AND PREPARING
13
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yy Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.) Do not use too
much force and over tighten the screws;
otherwise screw may be damaged and
not tighten correctly.
1 Lift and tilt the TV into its upright position on
a table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
m
10 c
10 cm
NOTE
yy Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
yy The Rubber will protect the opening
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY541*)
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
Rubber
2EA
yy If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
»» Using cabinets or stands
recommended by the manufacturer
of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not
overhanging the edge of the
supporting furniture.
»» Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»» Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
ENGLISH
ENG
Mounting on a table
CAUTION
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Adjusting the angle of the TV to suit view
Attaching the TV to a desk
(Only LY541*)
(Depending on model)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
The TV should be attached to a desk so
it cannot be pulled in a forward/backward
direction, potentially causing injury or damaging
the product.
20˚
20˚
A type )
CAUTION
yy When adjusting the angle of the product,
watch out for your fingers.
»» Personal injury may occur if hands
or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.
4-Screws
(Not supplied with TV)
Stand
Desk
NOTE
yy Screw : M5 x L (*L: Table depth + 8~10
mm)
ex) Table depth: 15 mm, Screw: M5 x L25
ASSEMBLING AND PREPARING
B type )
15
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Stand
Desk
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
yy Make sure that children do not climb on
or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the
device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
22LY33**
28LY33**
VESA
(A x B)(mm)
75 x 75
100 x 100
Standard
screw
M4 X L10
M4 X L10
Number of
screws
4
4
Wall mount
bracket
LSW140B
LSW140B
Model
32LY34**
32LY54**
42/47/55LY34**
42/47/55LY54**
VESA
(A x B)(mm)
200 x 200
400 x 400
Standard
screw
M6
M6
Number of
screws
4
4
LSW240B
MSW240
60LY34**
60LY54**
LSW440B
MSW240
Wall mount
bracket
Model
VESA
(A x B)(mm)
400 x 400
Standard
screw
M6
Number of
screws
4
Wall mount
bracket
LSW440B
A
B
ASSEMBLING AND PREPARING
17
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
yy Screw length from outer surface of back
cover should be under 8 mm.
(Only 22/28LY33**)
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
(Only 42LY34**, 42LY54**)
Wall Mount
Spacers
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8 mm
ENGLISH
ENG
NOTE
CAUTION
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
Image shown may differ from your TV.
(Only 32LY541*)
1 Gather and bind the cables with the cable
holder.
(Only 22/28LY33**)
1 Gather and bind the cables with the cable
holder.
Cable Holder
Cable Holder
(Only LY540*, LY34**)
1 Gather and bind the cables with the cable
holder.
2 Fix the Cable Management firmly to the TV.
Cable Holder
(Only 42/47/55LY541*)
1 Install the power cord holder and power
cord. It will help prevent the power cable
from being removed by accident.
2 Gather and bind the cables with the cable
holder.
Power Cord Holder/
Screw
Cable Management
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holder may break,
and injuries and damage to the TV may
occur.
MAKING CONNECTIONS
yy Image shown may differ from your TV.
yy Any separate cable is not provided.
This section on MAKING CONNECTIONS
mainly uses diagrams for the 47LY34** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
Antenna Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Wall Antenna
Socket
ANTENNA /
CABLE IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect
the TV signal input cable to the TV
through a DVD recorder or VCR. For
more information on recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yy In PC mode, some resolution settings
may not work properly depending on the
graphics card.
yy Only a USB storage device is
recognizable.
(*Not Provided)
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
ENGLISH
ENG
MAKING CONNECTIONS
19
20
MAKING CONNECTIONS
ENGLISH
ENG
Adapter Connection
Network Setup
(Only 22/28LY33**)
Wired network connection
(Depending on model & country)
Power Cord
DC-IN
(19V
)
This TV can be connected to a Pro:Centric
server via the LAN port. After making the physical connection, the TV needs to be set up for
network communication.
Connect the LAN port of the Modem or Router
from Pro:Centric server to the LAN port on the
TV.
(Only LY54**)
AC-DC Adapter
LAN
CAUTION
yy Please be sure to connect the TV to the
AC-DC power adapter before connecting
the TV’s power plug to a wall power
outlet.
Broadband Modem
Router
Broadband Service
Broadband Modem
Broadband Service
CAUTION
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
methods, please follow the specifications
of your telecommunication carrier or
internet service provider.
MAKING CONNECTIONS
EXTERNAL
SPEAKER OUT
VOLUME
CONTROL
Control port for Speaker out
UP
+
-
DOWN
GND
RIGHT
LEFT
GND
NOTE
yy Use only with the 3 Pole 3.5mm Stereo
Jack.
yy Do not connect your headphones or
earphones to the port for connecting an
external speaker.
Method of Volume control port
yy Cable Spec.
Each Up /
Down pin is
pulled to 3.3V
with CPU
GPIO.
GND / Up / Down
CPU detects
transition from
3.3V to GND
level for volume
control.
ENGLISH
ENG
Speaker Output Setup
21
22
MAKING CONNECTIONS
ENGLISH
ENG
Other Connections
Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Some separate cable is not provided.
(Only LY540H, LY541H)
VOLUME
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
IN
EXTERNAL
SPEAKER OUT
1
RGB IN (PC)
+
UP
- DOWN
Control port
RS-232C IN (CONTROL & SERVICE)
for Speaker out
ANTENNA/
CABLE IN
GND
RIGHT
LEFT
GND
RED
RED
WHITE
YELLOW
RED
WHITE
YELLOW
RED
RED
BLUE
L
VIDEO
RED
RED
WHITE
BLUE
GREEN
WHITE
GREEN
WHITE
AUDIO OUT
RGB OUT(PC)
R
AUDIO
L (MONO)
R
OPTICAL AUDIO IN
PC
DVD / Blu-Ray / HD Cable Box
Digital Audio Systerm
DVD / Blu-Ray / HD Cable Box
/ VCR
MAKING CONNECTIONS
23
ENGLISH
ENG
(Only LY540S)
OPTICAL
DIGITAL
AUDIO OUT
IN
EXTERNAL
SPEAKER OUT
1
RGB IN (PC)
RS-232C IN (CONTROL & SERVICE)
ANTENNA/
CABLE IN
GND
RIGHT
LEFT
GND
RED
RED
WHITE
YELLOW
RED
WHITE
YELLOW
RED
RED
L
VIDEO
RED
RED
BLUE
WHITE
BLUE
GREEN
WHITE
GREEN
WHITE
AUDIO OUT
RGB OUT(PC)
R
AUDIO
L (MONO)
R
OPTICAL AUDIO IN
PC
Digital Audio Systerm
DVD / Blu-Ray / HD Cable Box
DVD / Blu-Ray / HD Cable Box
/ VCR
24
MAKING CONNECTIONS
ENGLISH
ENG
(Only LY34**)
OPTICAL
DIGITAL
AUDIO OUT
EXTERNAL
SPEAKER OUT
IN
1
RGB IN (PC)
RS-232C IN (CONTROL & SERVICE)
ANTENNA/
CABLE IN
GND
RIGHT
LEFT
GND
RED
RED
WHITE
YELLOW
RED
WHITE
YELLOW
RED
RED
L
VIDEO
RED
RED
BLUE
WHITE
BLUE
GREEN
WHITE
GREEN
WHITE
AUDIO OUT
RGB OUT(PC)
R
AUDIO
L (MONO)
R
OPTICAL AUDIO IN
PC
Digital Audio Systerm
DVD / Blu-Ray / HD Cable Box
DVD / Blu-Ray / HD Cable Box
/ VCR
MAKING CONNECTIONS
25
USB IN 1
USB IN 2
ENGLISH
ENG
(Only LY34**, LY54**)
IN
USB
IN 2 (MHL)
1
H/P OUT
MHL passive cable
RED
WHITE
Headphone
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable Box /
DVD / PC(Only HDMI IN 1)
Mobile Phone
26
MAKING CONNECTIONS
ENGLISH
ENG
(Only LY33**)
GND
RIGHT
LEFT
GND
OPTICAL
DIGITAL
AUDIO OUT
EXTERNAL
SPEAKER
OUT
IN1
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
ANTENNA
/CABLE IN
L
DC-IN
(19V
)
L (MONO)
COMPONENT IN
R
L
COMPONENT IN
L
DVD / Blu-Ray /
HD Cable Box / VCR
RED
WHITE
L (MONO)
R
RED
WHITE
AUDIO
YELLOW
DVD / Blu-Ray /
HD Cable Box
R
L (MONO)
YELLOW
PC
RED
WHITE
RED
BLUE
VIDEO
Digital Audio Systerm
RED
WHITE
RED
BLUE
GREEN
L
AUDIO OUT
RGB OUT(PC)
R
L (MONO)
GREEN
RED
WHITE
OPTICAL AUDIO IN
COMPONENT IN
L
R
L (MONO)
R
MAKING CONNECTIONS
27
USB IN 1
USB IN 2
ENGLISH
ENG
(Only LY33**)
USB
COMPONENT IN
MHL passive cable
H/P OUT
IN 2
(MHL)
IN1
L
L (MONO)
R
RED
WHITE
Headphone
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable Box /
DVD / PC(Only HDMI IN 1)
Mobile Phone
28
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the
remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the
and
ends to the label inside the
compartment, and close the battery cover.
To remove the batteries, perform the installation actions in
reverse.
or
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
REMOTE CONTROL
29
(POWER) Turns the TV on or off.
TV/RAD
Selects
RATIO
INPUTRadio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AV MODE Selects an AV mode.
RATIO
1
Resizes an image.
2
3
def source.
INPUT .,;@
Changesabc
the input
Number buttons
4
Enters numbers.
ghi
5
jkl
6
mno
pqrs
8
tuv
9
wxyz
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
7
- Adjusts the volume level.
FAV
GUIDE
0
Accesses
Q.VIEW programme list.
LIST your favourite
[
+
Shows programme guide.
MUTE
FAV
Mutes all
sounds.
P
ꕌPꕍ Scrolls through the savedAGprogrammes.
P
E
ꕌPAGEꕍ Moves to the previous or next screen.
Teletext buttons ( TEXT/T.OPT) These buttons are used for
teletext.
Views the information of the current programme and
INFO SETTINGS
MY APPS
screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the quick menus.
OK
OK
Selects menus or options and confirms your input.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
BACK Returns to the previous level.
EXIT
REC
EXIT Clears all on-screen displays and return to TV viewing.
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.
SUBTITLE
1
1
SLEEP
Sets the sleep timer. (Depending on model)
LIVE TV
AD By pressing the AD button, audio descriptions function
will be enabled. (Depending on model)
REC
Control buttons (
) Controls the MY MEDIA
menus, or the SIMPLINK compatible devices (USB,SIMPLINK).
INFO
Coloured buttons These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
ENGLISH
ENG
(Depending on model)
30
REMOTE CONTROL
ENGLISH
ENG
(Depending on model)
(POWER) Turns the TV on or off.
ꕊ ENERGY SAVING Adjusts the brightness of the screen to
reduce energy consumption.
AV MODE Selects an AV mode.
INPUT Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
RATIO Resizes an image.
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
GUIDE Shows programme guide.
PORTAL Displays and removes hotel interactive menu.
INFO
Views the information of the current programme and
screen.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
OK
Selects menus or options and confirms your input.
SETTINGS Selects a menu. Clears all on-screen displays and
returns to TV viewing from any menu.
(BACK) Returns to the previous level.
EXIT
Clears on-screen displays and return to TV viewing.
Coloured buttons
: Red,
menus. (
These access special functions in some
: Green,
: Yellow,
: Blue)
Teletext buttons ( TEXT/T.OPT) These buttons are used for
teletext.
SUBTITLE Recalls your preferred subtitle in digital mode.
Control buttons (
)
Controls the MY MEDIA menus, or the SIMPLINK compatible
devices (USB, SIMPLINK).
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.
Q.MENU Accesses the Quick menus.
AD By pressing the AD button, audio descriptions function will
be enabled. (Depending on model)
MAINTENANCE
31
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
ENGLISH
ENG
MAINTENANCE
32
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
The software version can be updated for improvement in performance.Customer needs to ensure the
compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and
upload revised software version according to the guidance provided by LGE.
Problem
Solution
Cannot control the TV with the
remote control.
yy Check the remote control sensor on the product and try
again.
yy Check if there is any obstacle between the product and
the remote control.
yy Check if the batteries are still working and properly
installed (
to ,
to ).
No image display and no sound
is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by
connecting other products.
The TV turns off suddenly.
yy Check the power control settings. The power supply
may be interrupted.
yy Check if the Sleep Timer or Off Time feature is
activated in the TIME settings.
When connecting to the PC
(RGB/HDMI/DVI), ‘No signal’ or
‘Invalid Format’ is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the RGB/HDMI cable.
yy Restart the PC with the TV on.
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
22LY33**
MODELS
22LY330C-TA
(Only India)
22LY330C-TA
(Except for India)
Dimensions
(W x H x D)
With stand (mm)
507.6 x 355.9 x 140.6
507.6 x 355.9 x 135.8
Without stand (mm)
507.6 x 315.7 x 53.1
507.6 x 315.7 x 53.1
Weight
With stand (kg)
3.1
3.1
Without stand (kg)
Power requirement
2.9
19 V
2.9
2.0 A
19 V
2.0 A
28LY33**
MODELS
28LY330C-TA
(Only India)
28LY330C-TA
(Except for India)
Dimensions
(W x H x D)
With stand (mm)
641.5 x 432.0 x 175
641.5 x 432.0 x 170
Without stand (mm)
641.5 x 395.8 x 57.6
641.5 x 395.8 x 57.6
Weight
With stand (kg)
4.5
4.5
Without stand (kg)
4.2
4.2
Power requirement
MODELS
19 V
2.0 A
32LY34**
19 V
2.0 A
42LY34**
32LY340C-TA
42LY340C-TA
Dimensions
(W x H x D)
With stand (mm)
732 x 481 x 207
961 x 612 x 218
Without stand (mm)
732 x 437 x 55.5
961 x 567 x 55.5
Weight
With stand (kg)
6.2
9.5
Without stand (kg)
6.0
9.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
MODELS
47LY34**
55LY34**
47LY340C-TA
55LY340C-TA
Dimensions
(W x H x D)
With stand (mm)
1073 x 676 x 247
1243 x 772 x 247
Without stand (mm)
1073 x 629 x 55.8
1243 x 725 x 56.8
Weight
With stand (kg)
12.7
17.7
Without stand (kg)
12.3
17.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
ENGLISH
ENG
SPECIFICATIONS
33
34
SPECIFICATIONS
ENGLISH
ENG
MODELS
60LY34**
32LY540*
60LY340C-TA
32LY540H-TA
32LY540S-TA
Dimensions
(W x H x D)
With stand (mm)
1373 x 851 x 283
732 x 481 x 207
Without stand (mm)
1373 x 801 x 58.8
732 x 437 x 55.5
Weight
With stand (kg)
23.5
6.2
Without stand (kg)
23.0
6.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
42LY540*
47LY540*
42LY540H-TA
42LY540S-TA
47LY540H-TA
47LY540S-TA
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
961 x 612 x 218
1073 x 676 x 247
Without stand (mm)
961 x 567 x 55.5
1073 x 629 x 55.8
Weight
With stand (kg)
9.5
12.7
Without stand (kg)
9.2
12.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
MODELS
55LY540*
60LY540*
55LY540H-TA
55LY540S-TA
60LY540H-TA
60LY540S-TA
Dimensions
(W x H x D)
With stand (mm)
1243 x 772 x 247
1373 x 851 x 283
Without stand (mm)
1243 x 725 x 56.8
1373 x 801 x 58.8
Weight
With stand (kg)
17.7
23.5
Without stand (kg)
17.3
23.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LY541*
42LY541*
32LY541H-TA
42LY541H-TA
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
732 x 482 x 282
961 x 617 x 325
Without stand (mm)
732 x 437 x 55.5
961 x 567 x 55.5
Weight
With stand (kg)
8.9
12.6
Without stand (kg)
6.0
9.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
SPECIFICATIONS
47LY541*
55LY541*
47LY541H-TA
55LY541H-TA
Dimensions
(W x H x D)
With stand (mm)
1073 x 680 x 325
1243 x 771 x 325
Without stand (mm)
1073 x 629 x 55.8
1243 x 725 x 56.8
Weight
With stand (kg)
15.7
20.7
Without stand (kg)
12.3
17.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
AC/DC Adapter
(Only 22/28LY33**)
Environment
condition
Manufacturer : APD
Model : DA-48F19, DA-40I19
Manufacturer : Lien chang
Model : LCAP35
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Television System
Programme Coverage
Maximum number of
storable programmes
External Antenna Impedance
1 Only DVB-T2 support models.
2 Only DVB-C support models.
Digital TV
(Depend on Country)
Analogue TV
(Depend on Country)
DVB-T (DVB-T/T21),
DVB-C2
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
VHF, UHF
VHF, UHF, CATV
DVB-T/C & Analogue TV : 1,500
75 Ω
ENGLISH
ENG
MODELS
35
36
SPECIFICATIONS
ENGLISH
ENG
Component port connecting information
Component ports on the
TV
Video output ports on
DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
RGB-PC, HDMI-PC Supported Mode
(Use HDMI IN 1 for PC mode)
Horizontal
Resolution
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
Signal
Component
1024 x 768
48.363
60.00
480i / 576i
O
1280 x 768
47.776
59.870
480p / 576p
O
1152 x 864
54.348
60.053
720p / 1080i
O
1360 x 768
47.712
60.015
1080p
O
(50 Hz / 60 Hz only)
1280 x 1024
(HDMI-PC)
63.981
60.020
1920 x 1080
(HDMI-PC)
67.50
60.00
HDMI/DVI-DTV Supported Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.500
44.96
45
50
59.94
60
1920 x 1080i
33.72
33.75
28.125
59.94
60
50.00
1920 x 1080p
26.97
27
33.716
33.75
56.250
67.43
67.5
23.97
24
29.976
30.00
50
59.94
60
(Except for 32LY34**, 32LY54**,
22/28LY33**)
NOTE
(Only 22/28LY33**)
yy The optimal display resolution
: 1360 X 768 @60Hz
yy The optimal timing in each mode is
vertical frequency 60Hz.
SPECIFICATIONS
yy Maximum: 1920 x 1080 @ 30p (only Motion
JPEG 640 x 480 @ 30p)
yy .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC,
VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3,
AAC, AC3, MP3, 3D WMV Single Stream.
yy divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG1 Layer I, MPEG-1 Layer II, Dolby Digital,
MPEG-1 Layer III (MP3), *DTS
yy .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3), Dolby Digital,
Dolby Digital Plus, AAC, HE-AAC, *DTS
yy .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I,
MPEG- 1 Layer II, DVD-LPCM
yy .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3),
*DTS
yy .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1
Layer III (MP3), *DTS, LPCM
yy motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
yy .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II,
Dolby Digital, LPCM
yy .dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
yy .flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
yy *rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC,
RA6(Cook)
yy .3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
yy *DTS / *rm / *rmvb : Depending on model
Supported Audio Formats
yy File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
yy File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
yy File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
yy File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
yy File Type : WMA 10 Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro
yy File Type : OGG
[Bit rate] Free Format
[Sample freq.] ~ 48 kHz
[Support] OGG Vorvis
ENGLISH
ENG
Supported Video Formats
37
38
SPECIFICATIONS
ENGLISH
ENG
Supported Photo Formats
• Category : 2D (jpeg, jpg, jpe)
[Available file type] SOF0: Baseline,
SOF1 : Extend Sequential, SOF2 :
Progressive
[Photo size] Minimum : 64 x 64,
Maximum : Normal Type: 15360 (W) x 8640
(H), Progressive Type : 1920 (W) x 1440 (H)
• Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400
• Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum :
Interlace : 1200 x 800, Non-Interlace : 9600
x 6400
• BMP and PNG format files may be slower to
display than JPEG.
IR CODES
39
yy This feature is not available for all models.
Code
(Hexa)
08
F0
Code
(Hexa)
Function
Remote control Button
(Power On/Off)
28
BACK
TV/RAD
Remote control Button
5B
EXIT
Remote control Button
Function
(POWER)
Note
Note
Remote control Button
39
SUBTITLE
Remote control Button
44
OK
Remote control Button
30
AV MODE
Remote control Button
40
Remote control Button
79
RATIO
Remote control Button
41
^
v
0B
Remote control Button
Remote control Button
07
<
Remote control Button
10-19
Number Key 0-9
Remote control Button
06
>
Remote control Button
53
LIST
Remote control Button
72
RED
Remote control Button
1A
Q.VIEW
Remote control Button
71
GREEN
Remote control Button
+
Remote control Button
63
YELLOW
Remote control Button
03
-
Remote control Button
61
BLUE
Remote control Button
1E
FAV
Remote control Button
B1
n
Remote control Button
AB
GUIDE
Remote control Button
B0
►
Remote control Button
MUTE
Remote control Button
BA
yy
Remote control Button
Remote control Button
8E
►►
Remote control Button
Remote control Button
8F
◄◄
Remote control Button
Remote control Button
7E
SIMPLINK
Remote control Button
T.OPT(T.Option) Remote control Button
0C
PORTAL
Remote control Button
Remote control Button
02
09
00
01
20
21
INPUT
P ꕌ / PAGE ꕌ /
PAGE
P ꕍ / PAGE ꕍ /
PAGE
TEXT
43
SETTINGS
Remote control Button
95
ENERGY
SAVING
45
Q.MENU
Remote control Button
0E
SLEEP
Remote control Button
AA
INFO
Remote control Button
91
AD
Remote control Button
ENGLISH
ENG
IR CODES
40
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
yy Image shown may differ from your TV.
Type of Connector:
D-Sub 9-Pin Male
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V
control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS232C jack on the product back panel.
1
NOTE
5
6
yy RS-232C connection cables are not
supplied with the product.
RS-232C IN
(CONTROL & SERVICE)
(*Not Provided)
No.
9
Pin name
1
3.5 V
2
RXD (Receive data)
3
TXD (Transmit data)
4
IR OUT from TV
5
GND
6
No Connection
7
No Connection (5 V available in some
models)
8
No Connection
9
No Connection (12 V available in some
models)
EXTERNAL CONTROL DEVICE SETUP
Set ID
Set ID number. “Real Data Mapping”.
7-Wire Configurations
(Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
2
3
5
4
6
7
8
D-Sub 9
TV
3
2
5
6
4
8
7
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
3-Wire Configurations
(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
2
3
5
4
6
7
8
D-Sub 9
TV
3
TXD
2 RXD
5 GND
6 DTR
4 DSR
7 RTS
8 CTS
D-Sub 9
1 Press SETTINGS or HOME to access the
main menus.
2 Press the Navigation buttons to scroll to
OPTION and press OK.
3 Press the Navigation buttons to scroll to Set
ID and press OK.
4 Scroll left or right to select a set ID number
and select Close. The adjustment range is
1-99.
5 When you are finished, press EXIT.
ENGLISH
ENG
RS-232C Configurations
41
42
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Communication Parameters
yy Baud rate: 9600 bps (UART)
yy Data length: 8 bits
yy Parity : None
yy Stop bit: 1 bit
yy Communication code: ASCII code
yy Use a crossed (reverse) cable.
Command Reference List
(Depending on Model)
COMCOMMAND1 MAND2
DATA
(Hexadecimal)
01. Power
k
a
00 to 01
02. Aspect Ratio
k
c
(See p.44)
03. Screen Mute
k
d
(See p.44)
04. Volume Mute
k
e
00 to 01
k
f
00 to 64
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 32
11. OSD Select
k
l
00 to 01
05. Volume
Control
06. Contrast
COMCOMMAND1 MAND2
12. Remote
Control
Lock Mode
13. Balance
14. Colour Temperature
15. Energy
Saving
16. Auto Configuration
17. Equalize
18. Tune Command
19. Programme
Add/Skip
20. Key
21. Control
Back Light
22. Input select
(Main)
DATA
(Hexadecimal)
k
m
00 to 01
k
t
00 to 64
x
u
00 to 64
j
q
00 to 05
j
u
01
j
v
(See p.46)
m
a
(See p.46)
m
b
00 to 01
m
c
(See p.47)
m
g
00 to 64
x
b
(See p.47)
NOTE
yy During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
EXTERNAL CONTROL DEVICE SETUP
43
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]
[Command 2]
[Set ID]
: First command to control the TV.(j, k, m or x)
: Second command to control the TV.
: You can adjust the set ID to choose desired monitor ID number in option menu.
Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0x0 to
0x63) on transmission/receiving protocol.
[Data] : To transmit command data.Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ]
: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
ENGLISH
ENG
Transmission / Receiving Protocol
44
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
01. Power (Command: k a)
03. Screen Mute (Command: k d)
►► To control Power On/Off of the set.
►► To select screen mute on/off.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’
data based on this format, Acknowledgement
data feed back presents status about each
function.
* OK Ack., Error Ack. and other message may
display on the screen when TV is power On.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display
On Screen Display(OSD). But, in case of
Screen mute on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE
button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture
format) You can also adjust the screen format
using the Aspect Ratio in the Q.MENU. or
PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : N
ormal screen
(4:3)
02 : Wide screen
(16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : C
inema Zoom
1 to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or
4:3 screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p
50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz /
60 Hz), Component( 720p, 1080i, 1080p 50
Hz / 60 Hz) mode, Just Scan is available.
* Full Wide is supported only for Digital,
Analogue ( Eu only ), AV (EU only ) .
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to Real data mapping.
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to Real data mapping.
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
11. OSD Select (Command: k l)
►► To adjust screen brightness.
You can also adjust brightness in the
PICTURE menu.
►► To select OSD (On Screen Display) on/off
when controlling remotely.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 64
* Refer to Real data mapping.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
08. Colour (Command: k i)
►► To adjust the screen Colour.
You can also adjust colour in the PICTURE
menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 64
* Refer to Real data mapping.
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE
menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0
0 to Green : 64
* Refer to Real data mapping.
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
►► To lock the front panel controls on the
monitor and remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control,
use this mode. When main power is on/off,
external control lock is released.
* In the standby mode, if key lock is on, TV will
not turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO
menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data L : 0
0 to R : 64
* Refer to Real data mapping.
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the
PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 32
* Refer to Real data mapping.
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: x u)
►► To adjust colour temperature. You can also
adjust Colour Temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Warm: 00 to Cool:64
* Refer to Real data mapping.
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
07. Brightness (Command: k h)
45
46
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
15. Energy Saving (Command: j q)
►► To reduce the power consumption of the
TV. You can also adjust Energy Saving in
PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Level
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Description
...
1
0
0
0
0
0
Off
0
0
0
1
Minimum
0
0
1
0
Medium
0
0
1
1 Maximum
0
1
0
1 Screen Off
Data 00 : High channel data
0
1
0
0
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Auto
►► To adjust picture position and minimize image
shaking automatically. It works only in RGB
(PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
Data02 : [Antena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
Data Min: 00 to Max: 7DH
►► To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
LSB
0
18. Tune Command (Command: m a)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
17. Equalizer (Command : j v)
0
Ack [v][ ][Set ID][ ][OK/NG][Data][x]
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
Data 01 : To set
0
1 0 0 5th Band 1 0 1 0 0 20(decimal)
2
16. Auto Configure (Command: j u) (Only RGB
support model)
Frequency
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
3
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
0
Step
0 0 0 0 0 0(decimal)
0 1 0 3rd Band ... ... ... ... ...
►► 'Auto' is available in TV that supports
'Intelligent Sensor'.
0
0 0 0 1st Band
0 1 1 4th Band 1 0 0 1 1 19(decimal)
Power Saving
Function
7 6 5 4
0
7 6 5 Frequency 4 3 2 1 0
0
Data
0
0
EXTERNAL CONTROL DEVICE SETUP
►► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
0
1
0
0
Component
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
20. Key (Command: m c)
Input Number
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data IR CODES
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
HDMI
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
21. Control Backlight (Command: m g)
* Real data mapping
►► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
22. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
0
External Input
0
0
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
00 :
Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 :
Step 100
6E :
Step 110
73 :
74 :
Step 115
Step 116
CF :
Step 199
FE :
FF :
Step 254
Step 255
ENGLISH
ENG
19. Programme Add/Skip (Command: m b)
47
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
(Only DTV)
Download PDF