LG | E2380VX-PN | LG E2380VX-PN Owner’s Manual

ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
E2280V
E2380V
E2280VX
E2380VX
www.lg.com
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is
connected and that the outlet is easily accessible.
Operate the display only from a power source indicated in the specifications of this
manual or listed on the display. If you are not sure what type of power supply you
have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your
service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
Power Cord
Owner's Manual/Cards
15-pin D-Sub Signal Cable
(To set it up, this signal cable may be
attached to this product before
shipping out.)
DVI-D Signal Cable
(This feature is not available in
all countries.)
AC-DC adapter
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor face down on the cushion or soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction as shown in the picture.
Stand Body
Stand Base
3. Attach the monitor to the Stand Base by turning the screw to the right.
Screw : Turn the
screw by using the
screw handle.
4. Once assembled take the monitor up carefully and face the front side.
5
Connecting the Display
Turn the screw to the left to separate the stand body
from the stand base.
IMPORTANT
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚ to 10˚
IMPORTANT
It is recommended that in order to maintain an ergonomic and comfortable
viewing position, the forward tilt angle of the monitor should not exceed 5
degrees.
When adjusting the angle of the screen, do not put your finger(s) in between
the head of the monitor and the stand body. You can hurt your finger(s).
6
Connecting the Display
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
and power cord
of the signal cable.
A Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
C Connect HDMI Cable
2. Connect signal input cable 1
2
in order, then tighten the screw
Varies according to model.
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
Headphone/Earphone Input
DVI-D (This feature is not available in all countries.)
Wall-outlet type
When using a D-Sub signal input cable connector
for Macintosh
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
7
Connecting the Display
Connecting with the PC
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
E2280V/E2380V
Power Button
E2280VX/E2380VX
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO function button to improve resolution.
8
Control Panel Functions
Front Panel Controls
E2280V/E2380V
E2280VX/E2380VX
MENU Button
Use this button to enter or exit from the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by
pushing the MENU button for several seconds. The
message "OSD UNLOCKED" should appear.
SMART+ Button
Use this button to enter ORIGINAL RATIO, FENGINE,
DUAL WEB,CINEMA MODE menus.
For more information, refer to page 22 to 30.
9
Control Panel Functions
SUPER+
RESOLUTION
Button
For more information, refer to page 31 to 34.
E2280V / E2380V
AUTO Button
E2280VX / E2380VX
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
1920 x 1080
INPUT Button
Use this button to select source from input.
(SOURCE Hot key)
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want.
When only one signal is connected, it is automatically
detected. The default setting is D-Sub.
EXIT Button
Exit the OSD(On Screen Display).
Power Button &
Power Indicator
Use this button to turn the display on or off.
From front view,the power indicator stays purple if the
display is running properly (On Mode). If the display
is in Sleep Mode (Energy Saving), the power indicator
is blinking purple.
10
On Screen Display (OSD) Control Adjustment
E2280V / E2380V
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
1
Press the discretionary button, then the main menu of the OSD appears.
2
To access a control, use the corresponding buttons.
3
Use the
Use the
4
Press the EXIT Button to exit from the OSD.
/ buttons to adjust the image to the desired level.
button to select other sub-menu items.
11
On Screen Display (OSD) Control Adjustment
E2280VX / E2380VX
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
1
Press the discretionary button, then the main menu of the OSD appears.
2
To access a control, use the corresponding buttons.
3
Use the
Use the
4
Press the EXIT button to exit from the OSD.
/ buttons to adjust the image to the desired level.
button to select other sub-menu items.
12
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
D-SUB : D-SUB(Analog signal) input
DVI-D : DVI-D(Digital signal) input
HDMI : HDMI signal
Main menu
PICTURE
COLOR
Sub-menu
Supported input
BRIGHTNESS
CONTRAST
SHARPNESS
D-SUB
BLACK LEVEL
HDMI
DVI-D
HDMI
COLOR TEMP
(PRESET)
sRGB
6500K
7500K
8500K
9300K
D-SUB
DVI-D
(USER)
RED
GREEN
BLUE
Description
To adjust the brightness,
contrast and sharpness of the
screen
To customize the color of the
screen
HDMI
GAMMA
DISPLAY
HORIZONTAL
VERTICAL
D-SUB
To adjust the position of the
screen
CLOCK
PHASE
D-SUB
To improve the clarity and
stability of the screen
OVERSCAN
HDMI
VOLUME
VOLUME
HDMI
To adjust the headphone/
earphone volume
OTHERS
LANGUAGE
POWER INDICATOR
BUTTON INDICATOR
D-SUB
To customize the screen status
for a user's operating
environment
DVI-D
HDMI
WHITE BALANCE
D-SUB
D-SUB
DVI-D
HDMI
FACTORY RESET
SMART+
ORIGINAL WIDE
RATIO
ORIGINAL
D-SUB
F-ENGINE NORMAL
MOVIE
INTERNET
DEMO
D-SUB
DVI-D
HDMI
DVI-D
STANDARD
MOVIE
GAME
SPORTS
HDMI
DUAL WEB
CINEMA MODE
D-SUB
DVI-D
13
To select or customize desired
image settings
On Screen Display(OSD) Selection and Adjustment
SUPER+
RESOLUTION
D-SUB
DVI-D
HDMI
The image is inevitably damaged
during the date processing to
enlarge the image. SUPER+
RESOLUTION can maintain the
resolution to show the clear video
image even with the enlargement
with the picture quality
improvement technology that
adjusts the blurred focus and
rough outline due to the
enlargement.
NOTE
The order of icons may differ depending on the model (13 to 34).
14
On Screen Display(OSD) Selection and Adjustment
E2280V / E2380V
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
15
On Screen Display(OSD) Selection and Adjustment
E2280VX / E2380VX
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
16
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
BRIGHTNESS
To adjust the brightness of the
screen.
CONTRAST
To adjust the contrast of the screen.
SHARPNESS
To adjust the clearness of the screen.
BLACK LEVEL
You can set the offset level. If you
select 'HIGH', the screen will be bright
and if you select ‘LOW’, the screen will
be dark.
(only for HDMI input)
E2280V/E2380V
D-SUB/DVI-D input
HDMI input
* Offset?
As the criteria for video signal, it is the
darkest screen the monitor can show.
E2280VX/E2380VX
D-SUB/DVI-D input
HDMI input
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
EXIT : Exit
17
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
PRESET Mode
COLOR TEMP Select either PRESET or USER to
adjust the screen color.
PRESET
Select the screen color.
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K-7500K: Red screen color.
• 8500K-9300K: Blue screen color.
USER
RED
Set your own red color levels.
USER Mode
GREEN
Set your own green color levels.
BLUE
Set your own blue color levels.
E2280VX/E2380VX
PRESET Mode
GAMMA
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
USER Mode
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
EXIT : Exit
18
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
D-SUB input
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
OVERSCAN
Removes noise that may occur at the
edges of an image when HDMI is
connected to an external device. When
ON is selected, the image size is
reduced to prevent noise. When OFF is
selected, the original image size is
maintained regardless of noise.
(Only for HDMI input)
HDMI input
E2280VX/E2380VX
D-SUB input
HDMI input
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
EXIT : Exit
19
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
HDMI input
VOLUME
To adjust the volume of headphone/
Earphone.
(Only for HDMI input)
E2280VX/E2380VX
HDMI input
: Move to the upper menu
: Decrease
: Increase
: Mute
EXIT : Exit
20
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
LANGUAGE
To choose the language in which the
control names are displayed.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will be turned off.
If you set ON at any time, the power
indicator will automatically be turned on.
BUTTON
INDICATOR
Use this function to set the control key
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will be turned off.
If you set ON, it will be turned on.
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the ,
buttons to reset
immediately.
E2280V/E2380V
D-SUB input
HDMI/DVI-D input
E2280VX/E2380VX
D-SUB input
HDMI/DVI-D input
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
EXIT : Exit
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
21
On Screen Display(OSD) Selection and Adjustment
E2280V / E2380V
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SMART+ Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Move to the upper menu
Move
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
22
On Screen Display(OSD) Selection and Adjustment
E2280VX / E2380VX
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SMART+ Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Move to the upper menu
Move
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
23
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
D-SUB/DVI-D/HDMI input
WIDE
Switch to full screen mode according to
input image signal.
ORIGINAL
Change the input image signal ratio to
original.
E2280VX/E2380VX
D-SUB/DVI-D/HDMI input
: Move to the upper menu
: Move
EXIT : Exit
,
24
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
D-SUB/DVI-D input
NORMAL
Select this when you want to use the
product in the most general using
environment.
STANDARD
Select this when you want to use the
original standard video.
HDMI input
* In the General (Standard) mode, the
FENGINE is turned off.
D-SUB/DVI-D input
Select this when you are watching a
video or movie.
MOVIE
HDMI input
: Move to the upper menu
: Move
EXIT : Exit
,
25
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
D-SUB/DVI-D input
INTERNET
Select this when you are working on the
document (Word etc.)
GAME
Select this when you are playing a game.
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the
right so that the consumers can check the
difference after applying the video mode.
SPORTS
Select this when you watching general
sports.
HDMI input
D-SUB/DVI-D input
HDMI input
: Move to the upper menu
: Move
EXIT : Exit
,
26
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280VX/E2380VX
D-SUB/DVI-D input
NORMAL
Select this when you want to use the
product in the most general using
environment.
STANDARD
Select this when you want to use the
original standard video.
HDMI input
* In the General (Standard) mode, the
FENGINE is turned off.
D-SUB/DVI-D input
Select this when you are watching a
video or movie.
MOVIE
HDMI input
: Move to the upper menu
: Move
EXIT : Exit
,
27
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
D-SUB/DVI-D input
INTERNET
Select this when you are working on the
document (Word etc.)
GAME
Select this when you are playing a game.
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the
right so that the consumers can check the
difference after applying the video mode.
SPORTS
Select this when you watching general
sports.
HDMI input
D-SUB/DVI-D input
HDMI input
: Move to the upper menu
: Move
EXIT : Exit
,
28
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
* Before using below functions, please install Easy Set Packge programme.
E2280V/E2380V
D-SUB/DVI-D input
ON
Help user to browse web efficiently by
dividing in half.
Help to arrange and move windows on
screen.
Help user to control divided windows
ratio.
OFF
If select off, DUAL WEB is off.
ON
Make the eye comfortable by reducing
the background brightness in the web
page.
OFF
If select off, CINEMA MODE is off.
D-SUB/DVI-D input
: Move to the upper menu
: Move
EXIT : Exit
,
29
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
* Before using below functions, please install Easy Set Packge programme.
E2280VX/E2380VX
D-SUB/DVI-D input
ON
Help user to browse web efficiently by
dividing in half.
Help to arrange and move windows on
screen.
Help user to control divided windows
ratio.
OFF
If select off, DUAL WEB is off.
ON
Make the eye comfortable by reducing
the background brightness in the web
page.
OFF
If select off, CINEMA MODE is off.
D-SUB/DVI-D input
: Move to the upper menu
: Move
EXIT : Exit
,
30
On Screen Display(OSD) Selection and Adjustment
E2280V / E2380V
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SUPER+ RESOLUTION Button, then the main menu of the OSD appears.
Menu Name
Submenus
Move to the upper menu
Move
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
31
On Screen Display(OSD) Selection and Adjustment
E2280VX / E2380VX
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SUPER+ RESOLUTION Button, then the main menu of the OSD appears.
Menu Name
Submenus
Move to the upper menu
Button
Tip
Move
Exit
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
32
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280V/E2380V
NORMAL
Select this when you want to use the
product in the most general using
environment. In the General mode, the
SUPER+ RESOLUTION is turned off.
LOW
When the user wants a natural video
screen with soft image, it helps to get the
optimized screen. It is effective for video
with small movement or still image.
MEDIUM
When the user wants a comfortable
video screen at the medium level
between low and high mode, it helps to
get the optimized screen. It is effective
for UCC and SD level videos.
HIGH
When the user wants a sharp video
screen with clear images, it helps to get
the optimized screen. It is effective for
high resolution video screens and
games.
DEMO
The screen is divided to two, the left
screen with original screen, and the right
screen with SUPER+ RESOLUTION
mode, to compare the before and the
after the mode is applied.
: Move to the upper menu
: Move
EXIT : Exit
,
* Noise may exist according to SR(SUPER+ RESOLUTION) Mode, so enjoy the clear image by selecting
SR(SUPER+ RESOLUTION) Mode according to the Contents.
33
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2280VX/E2380VX
NORMAL
Select this when you want to use the
product in the most general using
environment. In the General mode, the
SUPER+ RESOLUTION is turned off.
LOW
When the user wants a natural video
screen with soft image, it helps to get the
optimized screen. It is effective for video
with small movement or still image.
MEDIUM
When the user wants a comfortable
video screen at the medium level
between low and high mode, it helps to
get the optimized screen. It is effective
for UCC and SD level videos.
HIGH
When the user wants a sharp video
screen with clear images, it helps to get
the optimized screen. It is effective for
high resolution video screens and
games.
DEMO
The screen is divided to two, the left
screen with original screen, and the right
screen with SUPER+ RESOLUTION
mode, to compare the before and the
after the mode is applied.
: Move to the upper menu
: Move
EXIT : Exit
,
* Noise may exist according to SR(SUPER+ RESOLUTION) Mode, so enjoy the clear image by selecting
SR(SUPER+ RESOLUTION) Mode according to the Contents.
34
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power indicator
flickering?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
35
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed.
If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen
may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
above may not be supported by the video card performance. In this case, please ask to the
computer or the video card manufacturer.
36
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
The Audio function is not working
● Picture OK & No sound.
• Check whether volume is "0".
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
37
Specifications
E2280V
Display
54.686 cm (21.53 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 54.686 cm
0.248 mm x 0.248 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI-D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Plug&Play
DDC 2B (Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Width 51.55 cm (20.30 inch)
Height 42.65 cm (16.79 inch)
Depth 19.45 cm ( 7.66 inch)
Video Input
Signal Input
Analog,Digital: 30 kHz to 83 kHz (Automatic)
HDMI : 30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync., Digital
24 W (Typ.)
1W
0.5 W
:
≤
≤
Weight(excl. packing)
Without Stand
Width 51.55 cm (20.30 inch)
Height 41.22 cm (16.23 inch)
Depth 9.54 cm ( 3.76 inch)
3.3 kg (7.28 lb)
Range
Tilt : -5˚ to 10˚
Power Input
12 V
AC-DC Adapter
Type LCAP07F,manufactured by Lienchange Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached (
Power cord
Wall-outlet type
2.0 A
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
38
Specifications
E2380V
Display
58.42 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 58.42 cm
0.266 mm x 0.266 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Plug&Play
DDC 2B (Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Width 55.39 cm (21.81 inch)
Height 44.84 cm (17.65 inch)
Depth 19.45 cm ( 7.66 inch)
Video Input
Signal Input
Analog,Digital: 30 kHz to 83 kHz (Automatic)
HDMI : 30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync., Digital
:
≤
≤
Weight(excl. packing)
28 W (Typ.)
1W
0.5 W
Without Stand
Width 55.39 cm (21.81 inch)
Height 43.37 cm (17.07 inch)
Depth 9.54 cm ( 3.76 inch)
3.7 kg (8.16 lb)
Range
Tilt : -5˚ to 10˚
Power Input
12 V
AC-DC Adapter
Type LCAP07F,manufactured by Lienchange Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached (
Power cord
Wall-outlet type
2.2 A
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
39
Specifications
E2280VX
Display
54.686 cm (21.53 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 54.686 cm
0.248 mm x 0.248 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI-D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Plug&Play
DDC 2B (Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Width 51.62 cm (20.32 inch)
Height 42.69 cm (16.81 inch)
Depth 19.45 cm ( 7.66 inch)
Video Input
Signal Input
Analog,Digital: 30 kHz to 83 kHz (Automatic)
HDMI : 30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync., Digital
:
≤
≤
25 W (Typ.)
1 W (D-SUB, DVI-D) / 1.2 W (HDMI)
0.5 W
Weight(excl. packing)
Without Stand
Width 51.62 cm (20.32 inch)
Height 41.25 cm (16.24 inch)
Depth 9.54 cm ( 3.76 inch)
3.7 kg (8.16 lb)
Range
Tilt : -5˚ to 10˚
Power Input
12 V
AC-DC Adapter
Type LCAP07F,manufactured by Lienchange Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached (
Power cord
Wall-outlet type
2.0 A
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
40
Specifications
E2380VX
Display
58.42 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 58.42 cm
0.266 mm x 0.266 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Plug&Play
DDC 2B (Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Width 55.44 cm (21.83 inch)
Height 44.84 cm (17.65 inch)
Depth 19.45 cm ( 7.66 inch)
Video Input
Signal Input
Analog,Digital: 30 kHz to 83 kHz (Automatic)
HDMI : 30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync., Digital
29 W (Typ.)
1 W (D-SUB, DVI-D) / 1.2 W (HDMI)
0.5 W
:
≤
≤
Weight(excl. packing)
Without Stand
Width 55.44 cm (21.83 inch)
Height 43.37 cm (17.07 inch)
Depth 9.54 cm ( 3.76 inch)
4.2 kg (9.26 lb)
Range
Tilt : -5˚ to 10˚
Power Input
12 V
AC-DC Adapter
Type LCAP07F,manufactured by Lienchange Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached (
Power cord
Wall-outlet type
2.2 A
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
41
Specifications
Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Horizontal Freq. (kHz)
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
75
60
60
* Recommend Mode
HDMI Video Input
Display Modes (Resolution)
1
2
3
4
5
6
7
8
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60
50
50
60
50
60
50
60
480p
576p
720p
720p
1080i
1080i
1080p
1080p
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Purple (front view)
Purple Blinking (front view)
Off
42
Make sure to read the Important Precautions
before using the product.
Ke e p t h e O w n e r ’ s M a n u a l (C D ) i n a n
accessible place for furture reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S. Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc.
has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Download PDF

advertising