LG | L1710B | LG L1710B Owner’s Manual

User's Guide
L1710B
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
however
On
Use
Safety
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
only the
cord, make
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate
the
this manual
display only from a power source indicated in the specifications of
listed on the display. If you are not sure what type of power supply
or
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So are frayed
shock
or
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
On Installation
Do not allow
to rest upon or roll over the power
the
power cord is
anything
display where the
Do not
use
this
display
sink, laundry tub, in
near water
cord, and do
not
place
subject to damage.
such
basement,
as near a
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
a wet
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
can cause
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
or strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible,
use
the recommended resolution to obtain the best
image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the
display.
NOTE
This is
This
a
rear
simplified representation of the rear view.
view represents a general model; your display may differ from the view as shown.
Signal Cable
Power Cord
Digital signal
-
*
Analog signal
DVI*
D-sub*
Varies according to model.
Wall-outlet
type*
2
1
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is
needed to change the 15
PC-outlet
pin high density (3 row) D-
type*
sub VGA connector on
thesupplied cable to a
pin 2 row connector.
15
PC
MAC
3.
Press
power
Image
button
on
the front switch
panel
to turn the
When monitor power is turned on, the 'Self
Setting Function' is executed automatically.
on.
NOTE
'
Self
Image Setting
Function'? This function
connects the monitor for the first
provides the
user
with
optimal display settings.When the
user
time, this function automatically adjusts the display to optimal settings for
individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once
again, push the 'AUTO' button on the front panel of the monitor. Otherwise, you may execute the Factory reset'
option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except
'Language'.
'
A3
Connecting
the
Display
Positioning your display
Adjust the position of the panel
Tilt
:
in various ways for maximum comfort.
-5˚~30˚
-5˚
Swivel
:
30˚
360˚
360˚
A4
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power
This Indicator
(DPMS)
lights
display
on or
up green when the
off.
display
Indicator
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
MENU Button
Use this button to enter
or
exit the On Screen
Display.
Buttons
Use these buttons to choose
the On Screen
AUTO/SELECT
Use this button to enter
Button
Display.
A5
or
adjust
items in
Display.
a
selection in the On Screen
Control Panel Functions
Control
Direct Access Function
This feature lets you easily select the best desired image
condition optimized to the environment (ambient illumination,
image types etc.).
?
DAY
?
NIGHT
:
?
TEXT
For text
?
?
?
:
Bright ambient
illumination
Dark ambient illumination
images (Word processing etc.)
images in videos or movies
PHOTO : For pictures or drawings
USER MODE : For use under user setup image
conditions (Brightness, contrast and color tint are
selected by the user in OSD Screen Setup Menu.)
:
MOVIE
:
For animation
Bring
up Contrast and
Brightness adjustment.
:
AUTO IMAGE ADJUSTMENT
When
adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display image
settings for the current screen resolution size
(display mode).
to the ideal
The best
display
mode is 1280x1024.
SOURCE
Use this button to make Dsub
or
DVI connector active. This
feature is used when two computers
display. The default setting is Dsub.
are
connected to the
CONTROLS LOCKED/UNLOCKED
:
MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and
button for 3 seconds: the message
"CONTROLS LOCKED" appears.
You
can
unlock the OSD controls at any time
button for 3 seconds:
by pushing
MENU button and
the message "CONTROLS UNLOCKED" will appear.
A6
the
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
MENU
Display, follow these steps:
AUTO/SELECT
AUTO/SELECT
MENU
Press the MENU Button, then the main
To
access a
becomes
making image adjustments.
control,
use
highlighted,
Use the
the
menu
of the OSD appears.
Buttons. When the icon you want
or
press the AUTO/ SELECT Button.
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the AUTO/SELECT Button.
Exit the OSD
by Pressing the MENU Button.
A7
On Screen
The
and
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
BRIGHTNESS
CONTRAST
COLOR
Sub
A
menu
D
Reference
BRIGHTNESS
To
CONTRAST
PRESET
adjust the brightness
and
contrast of the screen
9300K
To customize the color of the
6500K
screen
R/G/B(User Color)
GAMMA
POSITION
To
V POSITION
H POSITION
TRACKING
SETUP
adjust the position
CLOCK
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
To
for
OSD POSITION
a
user's
FACTORY RESET
WHITE BALANCE
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
depending
on
A8
and
screen
operating
SIGNAL
The order of icons may differ
of the
screen
the model (A8~A10).
status
environment
On Screen
You
were
Display(OSD)
introduced to the
Selection and
Adjustment
procedure of selecting and adjusting an item
the OSD
using
descriptions
system. Listed below are the icons, icon names, and icon
of the all items shown on the Menu.
NOTE
OSD (On Screen
To
Display)
menu
languages
adjust the brightness and
OSD
on
the monitor may differ from the manual.
contrast of the
Adjust
screen
Description
BRIGHTNESS
To
adjust
the
brightness
of the
screen.
CONTRAST
To
To customize the color of the
OSD
adjust
the contrast of the
screen.
screen
Adjust
Description
PRESET
9300K/6500K
Select the screen color.
9300K: Slightly bluish white.
6500K: Slightly reddish white.
?
?
RED
GREEN
Set your
own
color levels.
BLUE
GAMMA
Set your own gamma value. (-30~30)
On the monitor, high gamma values
display whitish images and low gamma
values
To
adjust the position of the
OSD
display high
contrast
images.
screen
Adjust
Description
Vertical Position
To
move
image
up and down.
Horizontal Position
To
A9
move
image left
and
right.
On Screen
To
Display(OSD) Selection
improve
OSD
the
and
stability
Adjustment
of the
Adjust
To customize the
OSD
clarity
and
screen
Description
screen
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To adjust the focus of the display. This
item allows you to remove any horizontal
noise and clear or sharpen the image of
characters.
status for
a
operating environment
user's
Adjust
Description
LANGUAGE
To choose the
control names
language in which
displayed.
the
are
OSD POSITION
To adjust position of the OSD window
the screen.
SIGNAL
To select DSUB ANALOG, DVI DIGITAL
as the active input. This feature is used
when two computers are connected to the
display. The display automatically detects
the proper input when only one video
source is connected.
FACTORY
RESET
Return to all
on
factory default settings
except "LANGUAGE".
If you don't want to reset the monitor, use
the
button to select NO and then
press the AUTO/SELECT button.
WHITE
If the
BALANCE
the
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
signal
level is
standard
adjusted
to fit into the
output level of the video card
in order to
provide
the
optimal image.
Activate this function when white and
black colors
For
If this does not
improve
the
screen
image,
restore the
necessary, perform the white balance function
only when the input signal is an analog signal.
A10
are
present in the
screen.
example
again.
factory
default
settings.
If
This function will be enabled
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
Check and
display connected?
properly to the power outlet.
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness
Is the power indicator
amber?
If the
the
see
display
mouse or
if the power cord is connected
and the contrast.
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
to
Make
sure
if the power is
on.
to turn on the PC.
Try
Do you see an "INPUT
SIGNAL OUT OF
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message
the screen?
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
on
SIGNAL
Doyouseea"NO
"message on
This message appears when the signal cable
between your PC and your display is not
the screen?
connected. Check the
Do you
see a
"CONTROLS LOCKED" message
Do you see
"CONTROLS LOCKED"
when you
button?
signal
push
MENU
You
cable and try
on
again.
the screen?
the current control settings,
they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button
so
can secure
that
and
button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
A11
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color setting
color)
The
screen
blinks.
higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A12
higher than AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
display
driver?
Have you installed the
display driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you
Make
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
sure
to check if the video card
supports
Plug&Play function.
monitor found"
message?
USB function
USB function cannot be
Check if the USB cable is
setup.
Check if the PC and OS
correctly connected.
USB compliant.
are
For verification of USB support, consult the
manufacturer of each system.
A13
Specifications
Display
17 inches (43.2cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
0.26mm pixel pitch
Sync Input
Horizontal
Freq.
Digital : 30 71kHz (Automatic)
Analog : 30 83kHz (Automatic)
-
-
Vertical
56
Freq.
Input Form
Video
Input
75Hz (Automatic)
-
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Digital
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
15
Signal Input
DVI
Input
Resolution
Plug&Play
Form
-
DVI
Recommend
D-sub Analog:VESA 1280 x 1024@75Hz
VESA 1280 x 1024@60Hz
Digital:VESA
DDC 2B
Power
Normal
:
Consumption
Stand-by/Suspend
≤
DPMS Off
≤1W
Dimensions
Width
37.0
cm
&Weight
(with tilt/ swivel
stand)
Height
Depth
42.1
cm
Tilt/Swivel
Range
Input
Environmental
Conditions
Tilt/Swivel Stand
Signal
cable
Power cord
43W
1W
/ 14.57 inches
/ 16.57 inches
22.3 cm / 8.78 inches
6.0 kg (13.23 lbs)
Net
-5˚~30˚
360˚
Tilt
Swivel
Power
1280 x 1024@60Hz
Max
AC 100-240V 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detached (
Attached(
)
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A14
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
VGA
123456789
640
x
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
350
31.469
70
70
VGA
720
x
400
31.468
VGA
640
x
480
31.469
60
75
VESA
640
x
480
37.500
VESA
800
x
600
37.879
60
75
VESA
800
x
600
46.875
MAC
832
x
624
49.725
75
60
VESA
1024
x
768
48.363
VESA
1024
x
768
60.123
75
75
10
MAC
1152
x
870
68.681
11
VESA
1152
x
900
61.805
65
60
75
12
VESA
1280
x
1024
63.981
13
VESA
1280
x
1024
79.976
Indicator
MODE
LED Color
Normal
green
Stand-by/Suspend
amber
DPMS Off
amber
A15
Specifications
VESA wall
mounting
Connected to another object (stand
type and wall-mounted type. This
monitor accepts a VESA-compliant
mounting interface pad.- optional)
For further information, refer to the
VESA Wall Mounting Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately
computer
at most
stores
A16
Specifications
Connector Pin
Signal
1
8
917
16
Assignment
24
DVI-D Connector
Pin
Pin
Signal(DVI-D)
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
T. M. D. S. Data2+
17
T. M. D. S. Data0-
123456789
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
T. M. D. S. Data4+
20
T. M. D. S. Data5-
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
DDC Data
Analog
Vertical
Sync.
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
Sync. and V. Sync.)
H.
T. M. D. S.
(Transition
Minimized Differential
A17
Signaling)
Plug
Detect
Making
use
of USB
(Universal Serial Bus) Optional
-
(Universal Serial Bus) is an innovation in connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, and other peripherals to your display
instead of having to connect them to your computer. This will give you greater
flexibility in setting up your system. USB allows you to connect a chain of up to
120 devices on a single USB port; and you can "hot" plug (attach them while
the computer is running) or unplug them while maintaining the Plug and the
Plug auto detection and configuration. This display has an integrated BUSpowered USB hub, allowing up to 2 other USB devices to be attached it.
USB
USB connection
1.
2.
Connect the upstream port of the display to the downstream port of the USB
compliant PC or another hub using the USB cable. (Computer must have a
USB port)
Connect the USB compliant peripherals to the downstream ports of the
display.
This is
of
a
rear
simplified representation
view.
USB
upstream
Port
To USB downstream port of
the USB compliant PC or
another hub cable
USB downstream Port
connect the cables from USB
compliant peripherals-such
keyboard, mouse, etc
as
NOTE
To activate the USB hub function, the display must be connected to
or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the
matches the shape at the connecting side.
shape
a
USB
compliant PC(OS)
of the connector at the cable side
Even if the display is in a power saving mode, USB compliant devices will function when
connected the USB ports(both the upstream and downstream) of the display.
are
A18
they
Making
use
USB
of USB
(Universal Serial Bus) Optional
-
Specifications
USB standard
Rev. 1.1
Downstream power supply
100mA for each (MAX)
Communication
12
USB
port
speed
1
complied BUS-powered hub
Mbps (full),
1.5
Mbps (low)
Upstream port
2 Downstream ports
IMPORTANT: These USB connectors
such
are
not
designed
directly
for
video camera, scanner, etc. LGE recommends
to the computer
as a
A19
use with high-power
connecting high-power
USB devices
USB devices
Digitally yours
Download PDF