LG | L1900R-BF | LG L1900R-BF Owner’s Manual

User's Guide
L1900J
L1900R
L1900E
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached
dealer when you
on
the
product and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the
cord, make
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the
Contact your dealer if the display is not operating properly.
power is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
or near a
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
or strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connect with
a
computer.
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection. 1
2.
A
Connecting
with
DVI-Analog signal input cable
B
Connecting
with
DVI-Digital signal input
Use after
inserting
Tip
Product color
(Voltage
represented
When
a
is
L1900J
connecting
AC/DC
adapter
4
When
connecting
to
a
3
PC
3 and
product color that customer purchased.
L1900R
wall concent
2
adapter
automatically controlled.)
here may differ from actual
L1900E
to
2 to AC-DC power
connecting power cable
it into outlet 4
cable
1
A
B
A3
Connecting
the
3. Touch
Display
button
on
the front switch
panel
to
turn the power on. When monitor power is
turned on, the 'Self Image Setting
Function' is executed
automatically.
(Only Analog Mode)
NOTE
'
Self Image Setting Function'? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals. Press Forte
Manager Program --> Picture --> Tracking --> Auto Setup if screen adjustment is needed
while using the product or if you want to operate this function manually, or, run Option of
Forte Manager Program --> Preset Provided When Delivered.
Otherwise, you may execute the 'Factory Default Preset' option on the OSD adjustment
menu. However, be aware that this option initializes all the menu items except
'LANGUAGE'.
To adjust angle of the product
1. Adjust location
Tilt
Range
:
~
~
of head section comfortable to
use.
0˚~20˚
Head section
Stand section
(finger) between head section and stand section when adjusting angle of screen.
(finger) may get caught or wounded.
Do not put your hand
Your hand
A4
Install Forte
Manager program.
This
product provides a program(Forte Manager CD) which makes
convenient to adjust various screen conditions including
Brightness, Tracking or Resolution by using mouse, without adjusting
users
each button.
Tip
■
This software
Forte
1) Close
requires Microsoft Internet Explorer 6.0 or greater.
Manager Program
all other
2)
Installation
3)
Forte
applications
screen
Manager
appears
Installation Procedure
before
Forte
installing
Manager program.
when Forte
automatically
Install Shield Wizard start
screen
Manager CD-ROM
is inserted.
appears.
4) Select [Installation Language].
5) Click
"Next" when Installation Wizard
6)
Click "Next" after
7)
Click "Next" after
8) Click
9)
screen
appears.
selecting
"I
accept the terms of the license
selecting
a
function to install.
agreement."
"Install."
Installation status
10)
Click "Finish" after
11)
Forte
screen
appears.
selecting "Yes,
Manager execution
I want to restart my
icon is created
on
computer now."
background
screen
when installation is
completed.
*Select [Execution] after pressing
[Start] button when installation screen does not appear automatically.
D:\.)
**Select OK after entering D: \SETUP.EXE (assumed CD-ROM Drive is
Tip
To
use
monitor with the best
quality~
provided with
~
Install Users Guide CD monitor driver file
*
accessories.
Please refer to 'Monitor Driver Installation Guide' to install monitor driver.
A5
Install Forte
■
Manager program.
Forte
Manager Program
Function
To
change or adjust Tracking, Brightness, Contrast, Position, Resolution,
Sharpness or Preset of Display, use or select Forte Manager program.
*Tracking and Position are supported only when signal is in analog mode.
PICTURE
-
Tracking, Brightness, Contrast, Position, Resolution, Sharpness,
Wizard, Preset
f-Engine/Preset
-
MOVIE, TEXT, NORMAL, USER, Preset
Color
-
Color
Temp. RGB,
Color
Calibration, Preset
Options
-
Preferences,
Power
Indicatort, Preset
Support
-
Update, Help,
Asset Id, Version, Preset
A6
Control Panel Functions
L1900E
Front Panel Controls
Rear
Control
Power Button
Function
Product may be turned on when you touch the
and turned off when you touch it once again.
*
Power Indicator
Check Power Indicator after
Power indicator is blue
and it
automatically
Saving.)
or
touching
button,
Power Button.
red when the
blinks in
product is
Sleep mode(Energy
on,
NOTE
To turn on/off the power indicator
Select
manually
Options of Forte Manager Program
->
~
~
Power Indicator
on/off the power indicator.
A7
->
On/Off to
manually
turn
Control Panel Functions
L1900J
L1900R
Front Panel Controls
Control
Function
Power Button
Power Indicator
Product may be turned on when you touch the
and turned off when you touch it once again.
Power Indicator is blue
or
red when the
automatically repeats from
Sleep mode (Energy Saving).
and it
button,
product is on
bright mode
dark to
in
[L1900J]
picture is for adjusting
brightness of Power Indicator.
Four-grade brightness adjustment is possible by lightly
touching with a finger.
The button underneath the
*
[L1900R]
The button underneath the
Power Indicator.
*
To turn on/off Power
picture
is for
turning
Indicator, touch lightly with
NOTE
Power Button is not
operated
before
Display
A8
is
on/off
completely exhibited.
a
finger.
DDC/CI ON/OFF Function
DDC/CI(Display
protocol
Data Channel Command
Interface) is communication
for communications between PC and monitor.
DDC/CI makes it possible to adjust and setup detailed functions
on
PC
instead of the monitor OSD.
Monitor
can
be
adjusted
with PC
by connecting communication between
ON, and monitor cannot be adjusted
PC and monitor when DDC/CI is
with PC because communication between PC and monitor is
disconnected when DDC/CI is OFF.
Tip
Especially,
Forte
Manager
because it does not
program must be
operate normally
operated
in DDC/CI ON status
in DDC/CI OFF status.
DDC/CI ON/OFF Funtion
Display
is
on
when Power button is
touched,
and DDC/CI is ON/OFF when Power button is
touched
*
Initial
more
Setup
than
a
few seconds.
Status is DDC/CI ON.
NOTE
However, DDC/CI function is operated only
not
operated
when
Display
is turned off
A9
once
when
by touching
Display
is on, and it is
Power button.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Does power indicator
or from dark to
blink
bright mode
repeated?
is
Do you see an "OUT
OF RANGE" message
on
the screen?
Check and
properly
If the
the
see
if the power cord is connected
to the power outlet.
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
Do you see a "CHECK
SIGNAL CABLE
This message appears when the signal cable
between your PC and your display is not
"message on the
connected. Check the
screen?
A10
signal
cable and try
again.
Troubleshooting
Display image
Display
is incorrect
Position is
Press Forte
Manager Program --> Picture
Tracking-->Auto Setup to adjust screen
automatically to the optimal condition, which fits to the
incorrect.
-->
current mode.
Configure by directly adjusting Forte
Manager Program --> Picture--> Position
adjusted condition is dissatisfactory
On the
if
Press Forte
Manager Program --> Picture
Tracking-->Auto Setup to adjust screen
automatically to the optimal condition, which fits to the
screen
-->
background, vertical bars
stripes are visible.
or
current mode.
Remove vertical lines
by adjusting
Manager Program --> Picture -->
Tracking -->Clock, if adjusted condition is
dissatisfactory.
Forte
Press Forte
Any horizontal noise
appearing in any image or
characters are not clearly
portrayed.
Manager Program
Resolution
-->
-->
Preferred to
-->
Picture
adjust screen
automatically to the optimal condition, which fits to the
current mode.
?
Adjust by selecting Forte Manager
Program --> Picture --> Tracking -->
Phase if adjusted condition is dissatisfactory.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed.
yes, readjust the video card to the recommend
If
resolution.
Check Control Panel
--> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
The
or
screen
color is
abnormal.
mono
Check if the
signal
cable is
properly connected and
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
use a
slot.
Set the color setting
Control Panel
The
screen
blinks.
Check if the
change
screen
higher than 24 bits (true color)
Settings.
at
is set to interlace mode and if yes,
it to the recommend resolution.
Make
be
-->
sure the power voltage is high enough,
higher than AC100-240V 50/60Hz.
A11
It has to
Troubleshooting
Have you installed the
Have you installed the
display driver?
Do you
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
display
driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make
sure
to check if the video card
Plug&Play function.
monitor found"
message?
A12
supports
Specifications
Display
19 inches (48.19cm) Flat Panel Active matrix-TFT LCD
Anti-Glare
coating
19 inches viewable
0.294mm
Sync Input
pixel pitch
Horizontal
30
Freq.
Vertical
Input
Video
Input
56
Freq.
Form
83kHz
-
30
75Hz (Automatic)
-
DVI
-
DVI
Resolution
Form
-
RGB
Analog
Digital
Max
DVI
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
On Mode
Consumption
Sleep
:
Mode
x
1024@75Hz
39W
≤1W
Width
41.65
cm
Height
42.89
cm
43.20
cm
14.45
cm
14.84
cm
11.34
cm
Depth
Analog: VESA 1280
x 1024@60Hz
≤2W
Off Mode
&Weight
(with tilt stand)
connector
connector
Analog (0.7Vp-p/75ohm), Digital
Digital: VESA 1280 x 1024@60Hz
D-sub
Dimensions
(Analog)
(Digital)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Signal Input
Input
71kHz
-
/ 16.39inches
/ 16.88 inches [L1900E]
/ 17.00 inches [L1900R], [L1900J]
/ 5.68 inches [L1900E]
/ 5.84 inches [L1900R]
/ 4.65 inches [L1900J]
Net
5.8
kg (12.79 lbs) [L1900E]
kg (14.99 lbs) [L1900R]
5.54 kg (12.21 lbs) [L1900J]
6.8
Til
tRange
Power Input
AC/DC
Adapter
Environmental
Conditions
0˚~20˚
Tilt
12V
3.0A
DVE. DSA-0421S-12 1
Operating Conditions
10˚C
Temperature
Storage Conditions
Temperature
Humidity
Tilt Stand
Signal
cable
Power cord
to 35 ˚C
10 % to 80 %
Humidity
-20˚C to 60 ˚C
5 % to 90 %
Attached( O ), Detachable (
Attached(
non-Condensing
non-Condensing
)
), Detachable ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change
A13
without notice.
Preset Modes
1
2
3
4
5
6
7
8
9
10
11
*12
**13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
(Resolution)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
70
70
60
75
60
75
75
60
75
75
65
60
75
*
Recommend Mode
**
Indicator
[L1900E]
On Mode
Sleep
Mode
Blue
or
Automatic
Off Mode
Red
blinking
0ff
[L1900J, L1900R]
On Mode
Sleep Mode
Off Mode
Blue
From dark to
or
bright
0ff
Red
mode is
repeated
Only Analog
Mode
Specifications
Kensington Security
Kensington Security Slot
a locking
cable that can be purchased
separately at most computer
Connected to
stores
Tip
Product color
customer
represented
purchased.
here may differ from actual
A15
product
color that
Digitally yours
Download PDF

advertising