LG | L1952T-BF | LG L1952T-SF Owner’s Manual

User's Guide
L1752T
L1952T
L1752TX
L1952TX
L1752TQ
L1952TQ
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the product and
dealer when you ask for service.
give the information to your
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the power cord supplied
cord, make
that it is certified
sure
with the unit. In
by
the
you use another power
national standards if not being
case
applicable
If the power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
provided by the supplier.
manufacturer
or
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
a
near
wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front
2.
Assemble the Stand
Make sure you
Body
facing
into the
downward
product
on a
soft cloth.
in the correct direction
as
shown in the
picture.
push it until you hear it "click".
Stand
Body
R
A
E
R
3.
Assemble the Stand
4.
Once assembled take the monitor up
Base(Front, Rear)
into the Stand
carefully
Stand
Body
E
F
R
in the correct direction.
Stand Base
REA
R
A
Body
and face the front side
R
RON
T
REA
R
FRO
NT
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and
get damaged
or
injure your foot.
A3
product
may
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~20˚
20
Warning:
When
the
adjusting
angle
of the screen, do not put
your finger in between the head of the monitor and
the stand body You can hurt your finger(s).
.
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
Connecting
the
Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable 1 When attached, tighten the thumbscrews to secure the
.
connection.
3. Connect the power cord into a proper power outlet
the
display.
that is
easily accessible
and close to
2
Signal
Power Cord
Cable
Analog signal Digital signal
D-sub
Varies according to model.
NOTE
This is
of the
This
DVI
a
simplified representation
rear
rear
Wall-outlet type
view.
view
represents
a
2
general model; your display may
differ from the view
as
1
shown.
PC-outlet type
PC
DVI-D(This feature is not available in all countries.)
PC
MAC
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Press
button
on
the side switch
panel
to turn the power
When monitor power is turned on, the 'Self
Function' is executed
on.
Image Setting
automatically.
(Only Analog Mode)
NOTE
Self Image Setting
'
Function'? This function
optimal display settings.When the user
to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the side panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
connects the monitor for the first
provides the
user
with
time, this function automatically adjusts the display
'
A5
Control Panel Functions
Side
Front Panel Controls
Control
Function
Use this button to enter
MENU Button
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Buttons
Use these buttons to select
Screen
For
SOURCE Hot
key
or
adjust functions
more
information, refer to page A13.
Use this button to make D-Sub
This feature is used when two
to the
in the On
Display.
display.
The default
A6
or
DVI connector active.
computers
setting
are
is D-Sub.
connected
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
17 inch monitor
:
1280
x
1024
19 inch monitor
:
1280
x
1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
up green
or
on or
off.
blue when the
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A7
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
Press the MENU Button, then the main
To
access a
becomes
control,
use
highlighted,
the
or
making image adjustments.
follow these steps:
menu
of the OSD appears.
Buttons. When the icon you want
press the AUTO/SET Button.
Use the
Buttons to adjust the image to the desired level. Use the
/
AUTO/SET Button to select other sub-menu items.
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A8
On Screen
The
and
Display(OSD) Selection
and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
sRGB
To customize the color of
6500K
the
screen
9300K
RED
GREEN
BLUE
HORIZONTAL
POSITION
To
VERTICAL
of the
To
improve the clarity and
stability, sharpness of the
CLOCK
TRACKING
adjust the position
screen
PHASE
screen
SHARPNESS
SETUP
LANGUAGE
OSD
HORIZONTAL
To customize the
screen
status for
operating
a
user's
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
MOVIE / TEXT
F-ENGINE
USER
To select
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A9
the model
(A9~A13).
On Screen
Display(OSD) Selection
and
Adjustment
were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
:
:
SET
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A10
the monitor may differ from the manual.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
PICTURE
PICTURE
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display
values
of the
brightness
screen.
screen.
whitish images and low gamma
display high contrast images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
PRESET
COLOR
?
sRGB: Set the
screen
color to fit the
SRGB standard color
?
?
specification.
Slightly reddish white.
9300K: Slightly bluish white.
6500K:
RED
Set your
own
red color levels.
Set your
own
green color levels.
Set your
own
blue color levels.
GREEN
MENU : Exit
BLUE
: Decrease
: Increase
SET : Select another sub-menu
POSITION
POSITION
HORIZONTAL
To
move
image
left and
VERTICAL
To
move
image
up and down.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
A11
right.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
TRACKING
CLOCK
TRACKING
To minimize any vertical bars or stripes
on the screen background.
visible
The horizontal
screen
size will also
change.
PHASE
To
adjust
the focus of the
display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
: Increase
SHARPNESS To adjust the clearness of the
SET : Select another sub-menu
SETUP
LANGUAGE
To choose the
control
screen.
language in which
displayed.
the
names are
SETUP
OSD
POSITION
To
adjust position
on
the
If the
WHITE
BALANCE
the
of the OSD window
screen.
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
SETUP
signal
level is
standard
adjusted
output
in order to
to fit into the
level of the video card
provide
the
optimal image.
Activate this function when white and
black colors
POWER
INDICATOR
MENU
:
:
SET
:
Exit
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
Restore all factory default
"LANGUAGE."
RESET
Press the
settings except
button to reset
immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A12
on.
only when
On Screen
Display(OSD) Selection
The OSD
right
screen
and
Adjustment
will appear when you touch the
button
on
the
side of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left
side, whereas the non-applied
will appear on the right side.Touch the SET
button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust
the USER sub-menu
function,
or
movies
User
can
You
can save or
...
Press the SET Button
...
USER
...
BRIGHTNESS
in videos
images (Word processing etc.)
You
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different envir
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
Select the
and
save
SAVE
sub-menu
the YES value
NORMAL This is under normal
A13
using the SET button
using the buttons.
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
?
Check and
properly
see
if the power cord is connected
to the power outlet.
Is the power indicator
light on?
?
Press the Power button.
Is the power on and the
power indicator blue or
?
Adjust the brightness
and the contrast.
green?
Is the power indicator
amber?
?
If the
the
display
mouse or
is in power
pressing
saving mode, try moving
key on the keyboard to
any
bring up the screen.
?TrytoturnonthePC.
Doyouseean"OUTOF
RANGE" message
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
see a
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
?
This message appears when the signal cable
between your PC and your display is not
connected. Check the
the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
?
on
MENU button?
?
You
so
You
by
can secure
that
they
signal
on
cable and
try again.
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
pushing the MENU button for several
can
seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
?
incorrect.
?
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
?
vertical
background,
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
?
?
The
screen
mono or
color is
?
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
and
abnormal.
?
in
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
use a
the slot.
?
Set the color
setting higher than
Settings.
at Control Panel
The
screen
blinks.
?
Check if the
24 bits
(true color)
-
screen
is set to interlace mode and if
it to the recommend resolution.
?
yes, change
Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A15
Troubleshooting
Have you installed the
Have you installed the
display
?
driver?
display
driver?
Be
display driver from the display
(or diskette) that comes with your
sure
to install the
driver CD
display. Or, you can also download the
our web site: http://www.lge.com.
Doyouseean
"Unrecognized monitor,
Plug&Play (VESA DDC)
?
Make
sure
Plug&Play
monitor found"
message?
A16
to check if the video card
function.
driver from
supports
Specifications
Display
17 inch
17 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(43.2 cm)
coating
17 inches viewable
0.264
Sync Input
pixel pitch
mm
Horizontal
Freq. Analog : 30 83 kHz (Automatic)
Digital : 30 71 kHz (Automatic)
Vertical Freq.
56 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
-
-
-
Video
Input
15
Signal Input
Input
Resolution
Form
RGB
VESA 1280
0n Mode
Sleep
Input
x
1024 @60 Hz
W(Typ.)
≤1W
≤1W
With Stand
Dimensions
Power
30
:
Mode
Off Mode
Range
(Digital)
Analog (0.7 Vp-p/ 75 ohm), Digital
Recommend
Power
Tilt
D connector
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
DDC 2B
&Weight
-
Max
Plug&Play
Consumption
D-Sub Connector
pin
DVI
Without Stand
Width
36.45
cm
/ 14.35 inches
36.45
cm
/ 14.35 inches
Height
Depth
37.82
cm
/ 14.89 inches
30.50
cm
/ 12.08 inches
18.00
cm
/
5.80
7.08 inches
Net
3.5
Tilt
-5˚~20˚
cm
/
2.28 inches
kg (7.72 lbs)
AC 100-240V~50/60Hz 0.8A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Stand Base
Attached(
Signal
cable
Power cord
Attached(
O
Wall-outlet
),
Detached
),
Detached
type
or
O
(
(
PC-outlet
)
)
type
NOTE
Information in this document is
subject
to
change without
A17
notice.
Specifications
Display
19 inch
19 inches
Anti-Glare
(48.19 cm)
coating
Flat Panel Active matrix-TFT LCD
19 inches viewable
0.294
Sync Input
pixel pitch
mm
Horizontal
Freq. Analog : 30 83 kHz (Automatic)
Digital : 30 71 kHz (Automatic)
Vertical Freq.
56 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
-
-
-
Video
Input
15
Signal Input
Input
Resolution
Form
RGB
VESA 1280
0n Mode
Sleep
Input
x
1024 @60 Hz
W(Typ.)
≤1W
≤1W
With Stand
Dimensions
Power
33
:
Mode
Off Mode
Range
(Digital)
Analog (0.7 Vp-p/ 75 ohm), Digital
Recommend
Power
Tilt
D connector
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
DDC 2B
&Weight
-
Max
Plug&Play
Consumption
D-Sub Connector
pin
DVI
Without Stand
Width
40.20
cm
/ 15.83 inches
40.20
cm
/ 15.83 inches
Height
Depth
40.75
cm
/ 16.04 inches
33.30
cm
/ 13.11 inches
18.00
cm
/
5.80
7.08 inches
Net
4.4
Tilt
-5˚~20˚
cm
/
2.28 inches
kg (9.70 lbs)
AC 100-240V~50/60Hz 0.8A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Stand Base
Attached(
Signal
cable
Power cord
Attached(
O
Wall-outlet
),
Detached
(
),
Detached
(
type
or
O
PC-outlet
)
)
type
NOTE
Information in this document is
subject
to
change without
A18
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
Horizontal
Vertical
Freq. (kHz)
Freq. (Hz)
1
VGA
640
x
350
31.469
2
VGA
720
x
400
31.468
70
3
VGA
640
x
480
31.469
60
4
VESA
640
x
480
37.500
75
5
VESA
800
x
600
37.879
60
6
VESA
800
x
600
46.875
75
7
MAC
832
x
624
49.725
75
8
VESA
VESA
1024
x
768
48.363
60
1024
x
768
60.023
75
10
MAC
1152
x
870
68.681
75
11
VESA
1152
x
900
61.805
65
*12
VESA
1280
x
1024
63.981
60
**13
VESA
1280
x
1024
79.976
75
9
70
*
Recommend Mode
**
Indicator
MODE
On Mode
Sleep
Mode
Off Mode
LED Color
green
or
blue
amber
Off
A19
Only Analog
Mode
Specifications
Connector Pin
Signal
1
8
9
16
17
24
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
(Transition
Sync.
Minimized Differential
A20
Signaling)
Plug
Detect
Installing
the Wall mount
plate
This monitor satisfies the
the
interchange
specifications
1.
2.
Place the monitor with its front
3.
Pull the stand to the direction
Hold the
body
of the Wall mount
plate
of the stand
as
facing
downward
shown in the
on a
image
1
soft cloth.
and bend
slightly to
right.
as
shown in the
image
2
to
separate.
1
2
R
A
E
R
4.
or
device.
Install the Wall mount
plate.
Wall mount
plate(Separate purchase)
stnad-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
purchased.
This is
is
Kensington Security Slot
a locking
cable that can be purchased
separately at most
Connected to
computer
A21
stores
the
Digitally yours
Download PDF