LG | M1917A-BT | LG M1917A-BT Owner’s Manual

Installation
and
Connection
Input
Selection
and Tracking
Miscellaneous
Safety Precautions
A1
Accessories
A4
Before connecting to the PC
A5
Name and Function of the Parts
A7
Connecting to External Devices
A13
Connecting to your PC
A13
Connecting to VCR/DVD
A15
Connecting to DVD/SET -TOP BOX
A17
When Watching TV
A18
To arrange cables using cable holder
A19
Adjusting the Screen
A20
Name of the Buttons in the screen Adjustment Unit
A20
OSD (On Screen Display) Menu
A22
OSD (On Screen Display) Screen Tracking Order
A23
STATION ID set/Select the channel when using the TV
A24
PICTURE ID to adjust the picture function (TV/Video)
A27
PICTURE ID to adjust the picture function (RGB-DTV, RGB-PC)
A28
SOUND ID to adjust the sound function
A29
TIME ID to adjust the time function
A30
SPECIAL ID to aelect the special function
A31
SCREEN ID to adjust the screen function (RGB-PC, RGB-DTV Only)
A32
Troubleshooting
A33
Specifications
A36
i
ENGLISH
Table of Contents
Safety Precautions
Please read these safety precautions carefully before using the product.
Warning If you ignore the warning message, you may be seriously injured or there is a possibility of
accident or death.
Caution If you ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in installing the Product
Warning
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you smell smoke or other odors or hear a strange sound unplug the power cord and contact the service
center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
contact the service center.
Caution
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
A1
Warning
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry
the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily
accessible after installation.
Caution
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
A2
ENGLISH
Electrical Power Related Precautions
Safety Precautions
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center
for repair.
Precautions in Using the Product
Warning
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Caution
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
A3
Make sure the following items are included with your product.
The product and the accessories can be different from the figures shown below.
Remote Control/Batteries
Power Cord
CD-ROM/Cards
D-Sub Signal Cable
Audio Cable (PC)
Stand base
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• You can use a remote control 7 meter distance and
30 degree (left/right) within the receiving unit scope.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
A4
ENGLISH
Accessories
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Connecting the stand base
1. Put the product with the front side facing downward on a soft cloth.
2. Align the hooks on the stand base with the matching slots in the base of the product.
3. Insert and push the hooks into slots.
Hook
Slot
Removing the stand base
1. Put the product with the front side facing downward on a soft cloth.
2. To remove the stand base, hold the bottom of the stand with one hand and
pull the base bottom latch with the other hand, as shown in the figure.
Bottom Latch
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A5
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range :-3˚~25˚
Swivel :345˚
A6
ENGLISH
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Name and Function of the Parts
Name of the Remote Control Buttons
Remote Control
MUTE
POWER
MUTE
POWER
TV : TV button
INPUT
TV
LIST
INPUT
Q.VIEW
I/II
MENU
Input
TV
AV
RGB-DTV
RGB-PC
MENU OK
I/II : Bilingual choice and sound mode selection
Press this button
[TV]
PR
OK
VOL
VOL
Each time you press the INPUT
button it will change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several
seconds the screen will
automatically move to the selected
menu.
PR
to switch from Stereo to Mono sound in case of stereo
transmission, or from Nicam Stereo to Nicam Mono,
in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam
Dual I+II in case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case
of bilingual transmission :
Dual I sends the primary broadcast language to the
loudspeakers ;
Dual II sends the secondary broadcast language to the
loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV]
SSM
PSM
In AV mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to
select the sound output.
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right
loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
NOTE : In case of weak stereo sound signals, with stereo
or Nicam stereo transmission, select mono reception.
A7
TV
LIST
POWER
INPUT
Q.VIEW
ENGLISH
MUTE
LIST : Programme list
To display the programme list (0~ 99).
I/II
0
1
2
3
4
MENU
---------------------
MENU
5
6
7
8
9
---------------------
OK
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
PR
Q.VIEW : QUICK VIEW Button
OK
VOL
VOL
To display the previously seleted TV channel
MENU
Use this button to enter the On Screen Display menu.
PR
PR (
) Buttons
Able to change channel.
VOL (
) Buttons
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
Number buttons
Able to directly select and change channel.
SSM
PSM
SLEEP
TEXT
UPDATE
TIME
SSM (Sound Status Memory) Button
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Speech, User
sound tone.
PSM (Picture Status Memory) Button
X
SIZE
MIX
Press repeatedly to select Dynamic, Standard, Mild,
Game or User picture mode.
SLEEP : SLEEP Timer
You can set a time period after which the
TV / AV / S-Video should switch itself to standby.
Press the key repeatedly to select the number of
minutes.
---(Off)
240
A8
10
20
30
180
120
90
60
Name and Function of the Parts
Name of the Remote Control Buttons
Remote Control - Using the Teletext function
LIST
Q.VIEW
MENU
TEXT
To select the teletext on or off. The main index page
or the last selected page appears on the screen
together with an information headline and an option
line at the bottom of the screen.
PR
OK
VOL
VOL
TIME
Press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
PR
MIX
Display the teletext pages superimposed on the
TV picture. To switch the TV picture off press this
button again.
SSM
PSM
SLEEP
TEXT
UPDATE
TIME
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
X
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
MODE
The mode will be switched in the Teletext mode.
?
i
M
Yellow key
Favourite Program On : Rotate favourite channel
A9
UPDATE
SSM
PSM
SLEEP
TEXT
UPDATE
TIME
X
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
?
i
Press the button to appear the TV programme.
At the top of screen indicates that you are still in
the teletext mode. Before interrupting teletext,
you may select a page number. When the page
has been found, the information line appears
briefly on your screen. Press the button again to
reappear teletext.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size.
HOLD
Press the button to stop the automatically rotating
of the subpages. Press the button again to
continue the automatic rotating again.
INDEX
M
To display the main index.
A10
ENGLISH
Remote Control - Using the Teletext function
Name and Function of the Parts
Rear View
RGB(PC/DTV)
ANTENNA
Audio
Video
[MONO]
Audio
AV IN
Power Connector : Connect the power cord.
AV Input Terminal
D-Sub Analog Signal Connector
TV Tuner Jack : Connect the antenna.
PC Sound Jack : Connect to the jack in the PC sound card.
Headphone/Earphone Connection Terminal
A11
H/P
S-Video
ENGLISH
AV Input Terminal
Video
[MONO]
Audio
AV IN
S-Video
Video Input Terminal
Audio Input Terminal
S-Video Input Terminal
Connecting the sound card output terminal
• Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
A12
Connecting to External Devices
Connecting to your PC
1.
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
When connecting with the D-Sub signal input cable.
Rear side of the product.
ANTENNA
RGB(PC/DTV)
Audio
Video
[MONO]
Audio
H/P
S-Video
AV IN
Audio cable
PC
Macintosh
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
A13
Connect the power cord.
ENGLISH
2.
Rear side of the product.
* When connecting to a wall outlet.
3. 1
Turn on power by pressing the power button on the product.
Power button
2 Turn on the PC.
4.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the front side of the product.
INPUT
Input
• Select RBG-PC
INPUT
I/II
LIST
Q.VIEW
MENU
TV
AV
RGB-DTV
RGB-PC
Each time you press the Input button it will
change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
Note
TV
OK
PR
OK
VOL
VOL
MENU OK
PR
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
A14
Connecting to External Devices
Connecting to VCR/DVD
1.
Connect the video/audio cable as shown in the below figure and then connect the power
cord (See page A14).
A When using the RCA cable.
B When using the S-Video cable.
• Connect to the S-Video input terminal to
• Connect the input terminal with a
watch high image quality movies.
proper colour match.
(Video – Yellow, Sound (left) –
White, Sound (right) – Red)
Rear side of the Product
Rear side of the Product
Audio
Video [MONO]
AV IN
Audio
Video [MONO]
AV IN
S-Video
W
R
VIDEO
OUT
AUDIO
OUT
R
AUDIO
OUT
VCR/DVD
VCR/DVD
Note
Red
White
Red
White
Yellow
VIDEO
OUT
W
S-Video Cable
(Not included)
RCA Cable
(Not included)
RCA Cable
(Not included)
Y
S-Video
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.
A15
ENGLISH
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the front side of the product.
INPUT
OK
TV
INPUT
I/II
LIST
Q.VIEW
MENU
Input
A
When connecting with a RCA cable.
• Select AV
B
When connecting with a S-Video cable.
TV
AV
RGB-DTV
RGB-PC
• Select AV
PR
OK
Each time you press the Input button it will
change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
MENU OK
A16
VOL
VOL
PR
Connecting to External Devices
Connecting to DVD/SET-TOP BOX
1.
When connecting the viConnect the D-sub cable, RCA/PC cable as shown in the
below figure and then connect the power cord. (see page A14)
[Rear side of the Product]
RGB(PC/DTV)
ANTENNA
Audio
RCA/PC cable
(Not included)
D-Sub cable
W
R
[Set-top Box/DVD]
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the front side of the product.
INPUT
OK
TV
INPUT
I/II
LIST
Q.VIEW
MENU
Input
• Select RGB-DTV
Each time you press the Input button it will
change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
A17
TV
AV
RGB-DTV
RGB-PC
PR
OK
MENU OK
VOL
VOL
PR
1.
ENGLISH
When WatchingTV
Check if the antenna cable is connected at the rear side of the product
and then, connect the power cord.
Rear Side of the Product
ANTENNA
Antenna Cable
(Not included.)
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the front side of the product.
INPUT
TV
INPUT
I/II
LIST
Q.VIEW
MENU
OK
Input
• Select TV
Each time you press the Input button it will
change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
A18
TV
AV
RGB-DTV
RGB-PC
PR
OK
VOL
VOL
PR
MENU OK
To arrange cables in order
Use the cable holder to simplify the cable arrangement.
RGB(PC/DTV)
ANTENNA
Video
S-Video
H/P
Cable Holder
A19
ENGLISH
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
Power Indicator
Power Button
MENU Button
OSD Select/Adjust Button
• This Indicator lights up blue when the display operates normally
(On Mode). If the display is in Sleep (Energy Saving) Mode, this
indicator colour changes to amber.
• Use this button to turn the product on and off.
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
• Use this button to select an icon or adjust the setting in the OSD screen.
• Use this button to control the channel for the TV signal.
• Adjust the volume.
A20
Volume
0
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
OK Button
• OK button is usually used in chooing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
[For PC Analog signal]
PC Information
1280 X 1024 @60 Hz
INPUT Button
TV
AV
RGB-DTV
RGB-PC
Television
CVBS, S-Video
DTV
D-Sub analog signal
Each time you press the Input button it will
change to
TV
AV
RGB-DTV
RGB-PC.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
IR Receiver
Input
TV
AV
RGB-DTV
RGB-PC
MENU OK
• The unit that receives the signal from the remote control.
A21
Icon
Function Description
Set/Select the channel when using the TV
STATION
Adjusting the picture function.
PICTURE
Adjusting the sound function.
SOUND
Adjusting the time function.
TIME
Selecting the setup function.
SPECIAL
Adjusting the screen function. (RGB-PC, RGB-DTV only)
SCREEN
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides
graphical presentation.
A22
ENGLISH
OSD (On Screen Display) Menu
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order
MENU
PR
PR
OK
OK
PR
PR
Pop up the
menu screen
MENU
OK
OK
Move where
you want to
adjust
Select a menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
• Use the remote control to adjust the OSD screen.
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK Button.
4
Use the
5
Accept the changes by pressing the OK Button.
6
Exit the OSD by pressing the MENU Button.
Buttons.
Buttons to adjust the item to the desired level.
A23
Auto programme
STATION
Auto programme
Manual programme
Programme edit
Favourite programme
MENU
System
To set
OK
It should be set before run auto searching.
Press the
buttons to select the TV system of the country or part of the
world from where you want to receive the TV channels.
* Supporting channel : C(V/UHF 01~69) S(Cable 01~47)
L: SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
M : NTSC-Multi
Manual programme
Storage
from
To select a programme number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe
number 11. Your TV search for new channels from number 11 onwards.
Search
Press OK or
button to start automatic programming. All available TV
channels will be searched and stored automatically. To stop auto
programming, press the MENU button. When auto programming is
completed, the programme list menu appears.
STATION
Auto programme
Manual programme
Programme edit
Favourite programme
MENU
To set
To change the channel.
(Change each item in Manual
Program and press the "MENU"
button to save the settings)
OK
Storage
Press the
buttons to select the channel number or enter the
programme number with the number buttons in where you want to store
channel.
System
Press the
buttons to select the TV system of the country or part of
the world from where you want to receive the TV channels.
L: SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
M : NTSC-Multi
A24
ENGLISH
STATION ID set/Select the channel when using the TV
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Channel Press the
buttons to select VHF/UHF for aerial channels or Cable for
cable channels. If you know the channel number, enter it directly with the
digit buttons 0 to 9.
To select the channel reception type. : VHF/UHF / Cable
Search
Use the
buttons to search next channel backward or forward direction.
Name
To see the assigned channel name.
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered. A name with up 5 letters or
numbers can be given to the programme numbers 0 to 99.
Press the
buttons to move cursor to be changed. -> Press the
buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) ->
Press OK button or MENU button.
Programme edit
programme edit
STATION
Auto programme
Manual programme
Programme edit
Favourite programme
MENU
To set
0
1
2
3
4
---------------------
5
6
7
8
9
Delete
Move
OK
MENU
---------------------
Copy
Skip
OK
Delete
Press the
buttons to select a TV channel to be deleted. ->
Press the red key on the remote control -> The background colour of
the selected channel will change to red.
Press the Delete button one more time to delete the selected channel.
All the following channels are shifted up one position.
Copy
Press the
buttons to select a TV channel to be copied. ->
Press the green key on the remote control. All the following channel
numbers are shifted down one position.
Move
Press the
buttons to select a channel number to be moved. ->
Press the yellow key on the remote control. -> Press the
buttons to move the TV channel to the desired channel number. ->
Press the yellow key again to release this function.
Skip
Press the
buttons to select a channel number to be skipped. ->
Press the blue key on the remote control. The skipped TV channel is
displayed in blue.
A25
Favourite
programme
STATION
Auto programme
Manual programme
Programme edit
Favourite programme
MENU
Favourite programme
Off
To set
OK
---------
MENU
---------------------------------
OK
This function lets you select your favourite programmes directly. (8 channel)
Press the
buttons to select a channel.
* Yellow key (remote control) : Rotate Favourite channel.
A26
ENGLISH
STATION ID set/Select the channel when using the TV
Adjusting the Screen
PICTURE ID adjust the picture function (TV/Video)
PSM
PSM
CSM
Contrast
Brightness
Colour
Sharpness
MENU
<
PICTURE
Dynamic
Standard
Mild
Game
User
OK
The PSM function automatically adjusts the screen
image quality. (It is not working in PC input.)
• Dynamic
Select this option to display with a sharp image.
• Standard
The most general and natural screen display status.
• Mild
Select this option to display with a mild image.
• Game
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
CSM
MENU
Cool
Normal
Warm
User
Selecting a factory setting colour set.
• Cool
Slightly purplish white.
• Normal
Slightly bluish white.
• Warm
Slightly reddish white.
• User
Select this option to use the user-defined settings.
OK
PICTURE
PSM
CSM
Contrast
Brightness
Colour
Sharpness
Tint
MENU
<
PICTURE
PSM
CSM
Contrast
Brightness
Colour
Sharpness
Red / Green / Blue
Set your own colour levels.
Contrast : To adjust the contrast of the screen.
Brightness : To adjust the brightness of the screen.
Colour : To adjust the colour to desired level.
Sharpness : To adjust the clearness of the screen.
Tint : To adjust the tint to desired level.
(only 60Hz signal)
OK
A27
CSM
PSM
CSM
Contrast
Brightness
MENU
Cool
Normal
Warm
User
Selecting a factory setting colour set.
• Cool
Slightly purplish white.
• Normal
Slightly bluish white.
• Warm
Slightly reddish white.
• User
Select this option to use the user-defined settings.
OK
PICTURE
PSM
CSM
Contrast
Brightness
MENU
<
PICTURE
Red / Green / Blue
Set your own colour levels.
Contrast : To adjust the contrast of the screen.
Brightness : To adjust the brightness of the screen.
OK
OK MENU
A28
ENGLISH
PICTURE ID adjust the picture function (RGB-DTV, RGB-PC)
Adjusting the Screen
SOUND ID to djust the sound function
MENU
<
SOUND
SSM
AVL
Balance
Flat
Music
Movie
Sports
User
OK
SSM
The best sound tone quality will be selected automatically depending on the video type that
you're currently watching.
• Flat : The most commanding and natural audio.
• Music : Select this option to enjoy the original sound when listening to the music.
• Movie : Select this option to enjoy sublime sound.
• Sports : Select this option to watch sports broadcasting.
• User : Select this option to use the user-defined audio settings.
AVL
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Balance
Use this function to balance sound from the left and right speakers.
A29
TIME
Clock
Off time
On time
Auto sleep
MENU
-- : --
OK
Clock
This function is used to set up of current time.
You must set the time correctly before using On/Off time function.
button to select the TIME menu.
1) Press the MENU button and then use
2) Press the
button and then use
button to select the Clock menu.
3) Press
button and then use
button to set the hour(00~23).
button and then use
button to set the minutes(00~59).
4) Press
The default value is -- : --.
5) Press the OK/MENU button to save.
Off/On time
The Off time automatically switches the set to off mode at the pre-set time.
1) Press the MENU button and then use
button to select the TIME menu.
2) Press the
button and then use
button to select Off time or On time.
3) Press the
button and then use
button to set the hour(00~23).
4) Press the
button and then use
button to set the minutes(00~59).
5) Press the
button and then use
button to select On or Off.
6) Only On time function; Press the
button and then
button to adjust volume level
and programme number.
7) Press the OK/MENU button to save.
Auto sleep
If Auto sleep is active and there is no input signal, the TV switches to off mode
automatically after 10 minutes.
button to select the Auto sleep menu.
1) Press the MENU button and then use
2) Press the
button and then use
button to select On or Off.
3) Press the OK/MENU button to save .
Note
• In the event of power interruption (disconnection or power failure), the Clock must be reset.
• Two hours after the set is switched on by the On time function it will automatically switch
back to off mode unless a button has been pressed.
• Once the On or Off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• The set must be in off mode for the On time to work.
• On timer will move on to auto off if no activity is received in 2hours after setting the On
time.
A30
ENGLISH
TIME ID to adjust the time function
Adjusting the Screen
SPECIAL ID to Select the special function
SPECIAL
Language
Input
Child lock
Power indicator
MENU
To set
OK
Language
To choose the language in which the control names are displayed.
Input
If you press the button once, the following Input Signal Window will appear. Select the
signal type you want using the
button.
Press OK to save the selection.
Child lock
Use the
buttons to select On or Off. It can be set up so that it can only be used with
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Child lock to the 'Off' position.
Power
indicator
Use this function to set the power indicator on the front side of the product to On or
Off. If you set On at any time, the power indicator will automatically be turned on.
A31
SCREEN
Auto configure
Manual configure
Reset
MENU
To start
OK
Auto
configure
This button is for the automatic adjustment of the screen Position, Clock and Phase.
(It is not working in RGB-DTV.)
Manual
configure
This button is for the manual adjustment of the screen Position, Clock and Phase.
• H-Position
To move the displayd image left or right.
• V-Position
To move the displayd image up or down.
• Clock
To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change.
• Phase
To adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Reset
Use this function to reset the product to the factory default. However, language selection
will not be initialized.
A32
ENGLISH
SCREEN ID to adjust the screen function (RGB-PC, RGB-DTV Only)
Troubleshooting
No image is displayed
● Is the product's power cord
connected?
• Check if the power cord is properly connected to
the outlet.
● Is the power indicator is turning on?
• Check if the power switch is turned on.
● Power is on, power indicator is blue
but the screen appears extremely
dark.
• Adjust brightness and contrast again.
● Does the power indicator look
amber?
• If the product is in power saving mode, move the
mouse or press any key.
● Does the 'Out of range' message
appear?
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring to
the Specifications in this user's guide.
* Maximum resolution
17 inch : 1280 x 1024 @60Hz
19 inch : 1280 x 1024 @60Hz
● Does the 'Check signal cable'
message appear?
• The signal cable between PC and product is not
connected. Check the signal cable.
• Press the 'INPUT' button in the remote control to
check the input signal.
'Unknown Product' message appears when the product is connected.
● Did you install the driver?
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com)
• See if the plug&play function is supported by
referring to the video card user's guide.
Note
* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A33
● Is the screen position wrong?
• Adjust the Position menu in OSD .
• See if the video card resolution and frequency
are supported by the product. If the frequency is
out of range, set to the recommended resolution
in the Control Panel – Display – Setting menu.
• Adjust the Clock menu in OSD.
● Do thin lines appear on the
background screen?
• Adjust the Phase menu in OSD.
● Horizontal noise appears or the
characters look blurred.
After-image appears on the product.
● After-image appears when the
product is turned off.
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screensaver
function.
A34
ENGLISH
The screen image looks abnormal.
Troubleshooting
The audio function does not work.
● No sound?
• Check if the audio cable is connected properly.
• Adjust the volume.
• Check if the sound is set properly.
● Sound is too low.
• Adjust the volume.
The TV function does not work.
● The TV signal is not being received.
• See if you have selected the proper channel
mode.
• Use the automatic channel setup function.
• Check if the TV antenna is properly connected.
Screen colour is abnormal.
● Screen has poor colour resolution (16
colours).
• Set the colour resolution to more than 24 bits (true
colour)
Select Control Panel – Display – Settings
– Colour Table menu in Windows.
● Screen colour is unstable or monocoloured.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
● Do black spots appear on the screen?
• Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
A35
The product specifications can change without prior notice for product improvement.
[17 inch]
LCD Panel
Video Signal
Screen Type
Pixel Pitch
17 inches (43.27 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 43.27 cm
0.264 mm
Max. Resolution
1280 X 1024 @60 Hz
Recommended Resolution 1280 X 1024 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type Separate
Input Connector
S-Video, Composite video, TV, D-Sub Analog,
Headphone, PC Audio In
Power
Rated Voltage
Power Consumption
AC 100-240V~ 50/60Hz 1.0A
On Mode
: 40 W
Sleep Mode ≤ 1 W
Off Mode
≤ 1W
Tilt
Tilt Range
Swivel
-3˚ ~ 25˚
345˚
Dimension/Weight
Size (WxLxH)
389.5 mm x 232 mmx 437.9 mm
Weight (excl. package) 5.28 kg (12.9 Ibs)
Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
A36
ENGLISH
Specifications
Specifications
The product specifications can change without prior notice for product improvement.
[19 inch]
LCD Panel
Video Signal
Screen Type
Pixel Pitch
19 inches (48.19 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 48.19 cm
0.294 mm
Max. Resolution
1280 X 1024 @60 Hz
Recommended Resolution 1280 X 1024 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type Separate
Input Connector
S-Video, Composite video, TV, D-Sub Analog,
Headphone, PC Audio In
Power
Rated Voltage
Power Consumption
AC 100-240V~ 50/60Hz 1.0A
On Mode
: 45 W
Sleep Mode ≤ 1 W
Off Mode
≤ 1W
Tilt
Tilt Range
Swivel
-3˚ ~ 25˚
345˚
Dimension/Weight
Size (WxLxH)
443.6 mm x 232.0 mm x 475.6 mm
Weight (excl. package) 6 kg (13.23 Ibs)
Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
A37
[17 inch] [19 inch]
Preset mode
1
2
3
4
5
6
7
VGA
VGA
VGA
VESA
VESA
VESA
MAC
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
70
70
59
75
60
75
74
Preset mode
8
9
10
11
12
VESA 1024 x 768
VESA 1024 x 768
MAC 1152 x 870
VESA 1152 x 900
VESA 1280 x 1024
Horizontal Vertical
Frequency Frequency
(kHz)
(Hz)
48.363
60.123
68.681
61.805
63.981
Power Indicator
Mode
On Mode
Sleep Mode
Off Mode
Product
Blue
Amber
Off
Theft prevention locking device
RGB(PC/DTV)
ANTENNA
Audio
Video
[MONO]
AV IN
Audio
H/P
S-Video
Locking Device
Use this locking cable (This has to be purchased separately if
required.) to prevent theft.
A38
60
75
75
65
60
ENGLISH
PC Mode – Preset Mode
Specifications
VESA wall mounting
This product meets VESA-compliant mounting interface pad specifications.
1. Separate the Hinge Cover using a screwdriver as shown in the picture.
Hinge Cover
2. Put the product on a piece of cloth or other soft surface with the front side facing downward.
3. Separate the stand base using a screwdriver as shown in the picture.
4. Install the VESA standrad wall mounting.
VESA wall mounting
Connected to another
object (stand type and
wall-mounted type).
This product accepts a
VESA-compliant mounting
interfacepad.(This has to be
purchased separately if
required.)
For further information,
refer to the VESA Wall
Mounting Instruction
Guide.
A39
Download PDF

advertising