LG DC699X Owner's manual

LG DC699X Owner's manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DC699X
PAL
BZ03
Before connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
Internet
Address:http://www.lg.ru
»IUO I‡?EOII‡ˇ
OIUE・‡
LG Electronics
(095)771-76-76
Safety
Precautions
SERIAL NUMBER: The serial number is found
CAUTION
of this unit. This number is
RISK OF ELECTRIC SHOCK
DO NOT OPEN
unique
on
the back
to this unit and not
available to others. You should record
tion here and retain this
your
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
guide
as a
requested informapermanent record of
purchase.
Model No.
Serial No.
___________________________________
___________________________________
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
symbol is
product it means the product is
by the European Directive 2002/96/EC.
attached to
covered
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
a
2. All electrical and electronic
products should be
separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
an
of
disposed
electric shock to persons.
3. The correct
The exclamation mark within
an
equilateral
disposal of your old appliance will
help prevent potential negative consequences
trian-
for
the environment and human health.
gle is intended to alert the user to the presence
important operating and maintenance (servicing) instructions in the literature accompanying
the product.
4. For
detailed information about disposal of
appliance, please contact your city office,
waste disposal service or the shop where you
purchased the product.
of
more
your old
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION
Most
appliances
That
Slots and
appliance
from
The
uct
openings
ensure
in the cabinet
reliable
heating.
openings should
are
of the
operation
provided for ventilation
product and to protect
it
over
on a
be
bed, sofa, rug
should not be
placed
never
or
in
a
be blocked
by placing the prodproduct
other similar surface. This
built-in installation such
rack unless proper ventilation is provided
facturer's instruction have been adhered to.
case or
as a
or
book-
the
the Power Cord
recommend
they
be
placed
upon
a
dedicated circuit;
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
and to
concerning
manu-
is,
a
Check the
single
outlet circuit which powers only that
no additional outlets or branch circuits.
and has
specification page
of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized services.
or
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,and the point where the cord exits the appliance.
such
CAUTION:
This
To
Digital
Video Disc
Player employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain for future reference,
as
ensure
should the unit
require maintenance, contact an authorized
procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazservice location-see service
ardous radiation exposure.
To prevent direct exposure to laser
beam, do
not
try
to
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION: The apparatus shall not be exposed to water,
or splashing and that no objects filled with liquids,
dripping
2
as
vases, shall be
placed
on
is
easily
the
apparatus.
mains, pull
product,
out the mains
ensure
that the
plug
accessible.
This
product
is manufactured to
radio interference
open the enclosure. Visible laser radiation when open. DO
NOT STARE INTO BEAM.
such
To disconnect power from the
cord plug. When installing the
TIVE
requirements
comply
with the
of EEC DIREC-
89/336/EEC, 93/68/EEC and 73/23/EEC.
Table of Contents
Introduction
Operation
SafetyPrecautions.........................2
Operationwithtape.....................22-25
Playingatape..........................22
.22
CM(CommercialMessage)Skip.
OPR (Optimum Picture Response).
22
InstantTimerRecording...................23
Timer recording using On Screen Display
24-25
.26-28
AdditionalOperation-VCRpart.
Hi-FiStereoSoundSystem................26
OnScreenDisplay(F.OSD)................26
TapeCounterMemoryStop................26
TableofContents..........................3
BeforeUse..............................4-5
AbouttheSymbolDisplay..............4
SymbolusedinthisManual...............4
NotesonDiscs.........................4
HandlingDiscs.........................4
StoringDiscs..........................4
CleaningDiscs.........................4
.4
SelectingtheViewingSource.
TypesofPlayableDiscs...................5
RegionalCode..........................5
Card useable on this unit / Using Memory Card
6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
FrontPanel...............................7
RemoteControl............................8
RearPanel................................9
Preparation
Connections...........................10-12
10
Connecting to a TV & Decoder(or Satellite)
Resolutionsetting..........................11
.11
ConnectingtoOptionalEquipment.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder.......................26
.27
VideoDoctor(Self-Diagnosis).
Lock(ChildLock)........................27
.27
WideScreenCompatibility16:9.
1WMode(Powersavemode)..............27
28
Recording from External Components
CopyingfromDVDtoVCR.................28
.29
GeneralPlaybackfeatures-DVDPart.
PlayingaDVDorVideoCD..................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Additionalfeatures.......................30
.
3DSurround........................30
TimeSearch........................30
.
HDMIConnection..........................12
MarkerSearch......................30
.13-17
LastSceneMemory..................30
BeforeOperation-VCRpart.
.13
TuninginavideochannelonyourTV.
.13
UsingyourVCRfortheveryfirsttime
SettingtheclockManually.................14
Tosetthecoloursystem..................14
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Howtousethemainmenu................15
.15
TuninginTVStationsAutomatically.
.16
TuninginTVStationsManually.
.17
ChangingtheorderofTVStations.
DeletingTVStations.....................17
.18-21
BeforeOperation-DVDpart.
18
Displaying Disc Information on-screen
InitialSettings..........................18
GeneralOperation.......................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSave........................30
.
.
.31
PlayinganAudioCDorMP3/WMAfile
ProgrammedPlayback....................31
.31
RepeatProgrammedTracks
.31
ErasingaTrackfromProgramList.
.31
ErasingtheCompleteProgramList.
ViewingaJPEGfile.......................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow............................32
StillPicture............................32
MovingtoanotherFile....................32
Zoom.................................32
.
.19
Torotatepicture.........................32
PlayingaDivXMoviefile...................33
PlayingaDVDVRformatDisc...............34
AdditionalOperation.......................35
35
Controlling other TVs with the remote control
DISPLAY..............................19
MaintenanceandService..................35
LANGUAGE............................19
MenuLanguage......................19
DiscAudio/Subtitle/Menu.
.
.
.
.
.
.
.
.
.
.
.
TVAspect..........................19
DisplayMode........................19
TVOutputSelect.....................19
.
.
.
Reference
AUDIO................................20
LanguageandAreaCodeList...............36
LanguageCodeList......................36
.20
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)..............20
.20
DRC(DynamicRangeControl).
Troubleshooting..........................37
Specification.............................38
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Vocal..............................20
LOCK(ParentalControl)..................20
Rating.............................20
Password(SecurityCode)..............20
AreaCode..........................21
OTHERS..............................21
PBC..............................21
AutoPlay..........................21
DivX(R)VOD........................21
AreaCodeList..........................36
Introducin
Before Use
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future reference.
Notes
on
This manual
Handling
Discs
provides
information
maintenance of your DVD
require service,
contact
on
the
operation
and
Should the unit
authorized service location.
an
Do not touch the
the
disc
on
the
by
playback side of the disc. Hold
edges so that fingerprints do not get
surface. Never stick paper
About the
"
player.
Discs
or
tape
on
the
the disc.
Symbol Display
"
may appear on your TV
and indicates that the function
manual is not available
Symbol
on
display during operation
explained in this owner's
that specific DVD video disc.
Used in this Manual
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
ALL
making
of the
following symbols
represented by the symbol.
one
to the disc
the task easier.
is
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the
center out.
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA
WMA files
spray intended for older
DivX
DivX files
Selecting
the
You must select
VCR)
to view
vinyl
records.
Viewing Source
of your output
the TV screen.
one
on
sources
(DVD
or
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights
TV
and
output
source
of DVD deck is viewed
on
the
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
TV
and
output
source
of VCR deck is viewed
on
the
screen.
Notes:
?
?
If you insert a disc while this unit is in the VCR
this unit will switch to DVD mode automatically.
If you insert a cassette tape without prevention tab
while this unit is in the DVD mode, this unit will switch
to VCR mode
4
mode,
automatically.
Before Use
of
Types
(Continued)
Notes
Discs
Playable
Copyrights:
on
It is forbidden
broadcast via
DVD
by law to copy, broadcast, show,
cable, play in public, or rent copyrighted
material without
permission. This product features the
protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these discs
picture noise will appear. This product incorporates
copyright protection technology that is protected by
(8cm/12cmdisc)
copy
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
method claims of certain U.S.
intellectual
In
addition, this unit plays DVD±R/RW, CD-R/RW and
SVCD that contains audio titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates
a product feature that is capable
playing DVD-RW discs recorded with Video
Recording format.
of
patents and other
property rights owned by Macrovision
and other
Use of this
Corporation
rights
copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
owners.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Notes:
?
?
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs cannot
be played on the unit.
Do not
use
shaped
or
This unit
OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
requires
discs and
optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different
types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible playback.
Customers should note that
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
Regional Code
This unit has
unit. This unit
the
rear
Notes
?
a
regional code printed on the rear of the
play only DVD discs labelled same as
can
of the unit
on
or
Regional
"ALL".
Codes
Most DVD discs have
bers in it
clearly
a
visible
must match your unit's
not play.
?
globe
on
the
with
one or more num-
cover.
regional
code
This number
or
the disc
DVD
PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
to meet
recordings
PROBLEMS,
IT IS RECOMMENDED THAT THE USER SWITCH THE
OUTPUT. IF THERE ARE QUESTIONS REGARDING
certain technical standards in order to achieve
required
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE
CONNECTION TO THE 'STANDARD DEFINITION'
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
?
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
can-
If you try to play a DVD with a different regional code
from your player, the message "Check Regional
Code" appears on the TV screen.
Introducin
Card useable
Card useable
?
Micro Drive
?
Secure
?
Multi Media Card
(MD),
Digital
this unit /
Using Memory Card
Using Memory Card
this unit
Flash Card
Compact
?
on
on
(CF)
1.
ST1 MD
Card
(SD),
(MMC),
2.
mode.
MMC
The
Plus, RS MMC,
Memory
the TV
eXtreme
Digital picture
Memory
Stick
?
(MS),
Card
Ms
memory card.
a
Press MEMORY
Mini SD
MMC Moblie
?
Insert
the Front
panel
in the DVD
Card slot choice
menu
appears
on
on
screen.
(xD)
Duo, MS Pro,
MS Pro Duo
Memory
?
Stick Pro
Only
?
Regarding
FAT 32
Write Protect
For cards that have
on
or
the memory cards recommended above.
use
switch is
(MS-Pro)
with: FAT 12, FAT 16,
Compatible
?
a
it will not
protect switch, if the
be possible to write, erase
3.
write
Use v/V to select the desired
then press ENTER.
The PHOTO, MUSIC
or
format the card.
the TV
Inserting/Removing
the
Memory Card
4.
or
Memory
MOVIE
appears
on
screen.
Press RETURN to return to the
choice
menu
Card slot
Memory
Card slot
menu.
Note:
For details
on
pages.(See
Insert
CF, MD
or
ST1 MD card
Insert
SD, MMC, xD, MS,
SD, MMC Plus, RS
MMC, MMC Moblie, MS,
MS Duo, MS Pro Duo or
Mini
MS-Pro card
Inserting the card: Insert straight-in until it fits into
place.
Removing the card: Withdraw the card carefully.
Notes:
Keep
the memory card out of reach of children.
If
swallowed, seek medical advice immediately.
Some memory card may not work in this unit,
depending
on
the
formatting.
Do not extract the memory card while
operating.
6
each
page
operation item,
31-33)
refer to relevant
Front Panel
1
2
3
45
6789101112131415
Introducin
16
1.
17
1/I
9.x
Switches the unit to ON
2.
Disc
3.
PROG.
or
OFF.
Stops playback.
Tray
Insert
10. ./m
disc here.
a
(V/v)
Go to
Channel
Programme
Press and hold for two seconds for
Opens or closes the
Display window
disc
search. Rewinds the
tray.
[P]:
Starts
:
Progressive
Indicates
:
Child Lock is
is
:
recording
search. Winds the
14. Audio IN
or a
timer
programmed.
a
fast forward
tape forwards.
Jacks
(L/R)
VCR
15.
Tape Eject
A Cassette is in the VCR deck.
16. MEMORY CARD SLOT
VCR: VCR deck is selected.
Insert
REC: VCR
(CF, MD, MMC, SD, MS, xD, MS-Pro).
recording
:
is
engaged.
Indicates total
playing time/elapsed
time/current time.
Remote Sensor
Point the remote control here.
Tape Compartment
8.
DVD/VCR
DVD/VCR Selector
a
memory card
17. MEMORY CARD
23.)
Accesses the
18. RES.
You
-
menu
for memory card.
(RESOLUTION)
can
change
HDMI mode
:
the resolution
You
can
depending
switch among the
on
your TV.
576p, 720p
or
1080i resolution.
Component mode : You
720p or 1080i resolution.
-
7.
reverse
13. Video IN Jack
engaged.
DVD to VHS copy is in progress.
TV: Indicates TV mode. (See Notes on page
6.
fast
chapter/track.
Press and hold for two seconds for
Scan is set to On mode.
repeat mode.
DVD+VCR is in timer
recording
a
tape.
playback.
Go to NEXT
Adisc is loaded in the DVD deck.
:
to
12. M/>
DVD: DVD deck is selected.
Indicates the
or
11. N
Shows the current status of the unit.
:
beginning of current chapter/track
chapter/track.
PREVIOUS
Selectors.
DVD
4.
5.
18
can
switch among
576i, 576p,
Remote Control
POWER
Switch this unit ON
or
TV Control Buttons
OFF.
TV POWER: Turns
DVD/VCR select button
operational mode of
TV AV: Selects the TV's
Selects
TV VOL +/--:
OPEN/CLOSE
or
a menu.
FGDE(left/right/up/down)
Select
mode, for fast
To control vertical tremble
into
picture
tape.
or
ENTER/OK
Access
tape during the
Access
Select
the
on
the
Select
of
menu
audio
an
subtitle
a
Select DVD
Enlarge
a
video CD
language (DVD).
language.
camera
video
REC/ITR
if available
angle
image.
(O)
Record your
LOCK
input sources
(Child Lock)
Switch the Child Lock
on
into
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
PROGRAM
Access
or remove
program
menu.
RANDOM/CM SKIP
Play
tracks in random order.
CM SKIP
RESOLUTION
REPEAT
all.
You
can change the resolution
depending on your TV.
A-B/LP
Select the
the
ZOOM
program
MARKER SEARCH menu.
Reset tape counter to zero.
Repeat chapter, track, title,
menu.
ANGLE
menu.
on
setup
SUBTITLE
CLEAR
mark
DVD disc.
AUDIO
SEARCH
track number
or remove
Displays
point during playback.
a
a
with PBC.
MARKER
menu or a
of
RETURN
search.
Clear
menu
SETUP/ i
reverse
MARKER SEARCH
selection.
menu
DISC MENU
forward.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY ( N )
Starts playback.
STOP(A)
Stops playback.
Display
during
still.
Acknowledge
picture
search and Advances the tape during
the STOP mode, fast forward picture
Mark any
adjust tracking.
recording
(m/M)
VCR: Rewinds the
menu.
Select channel programme of VCR.
To
BACKWARD / FORWARD
STOP
item in the
an
PR/TRK(+/-)
AV
DVD: Search backward
or
counter.
Switch between your TV's tuner
and the VCR's internal tuner.
for
Display.
Shows you the current time
TV/VCR
source
TV's volume.
Access the On-Screen
0-9 numerical buttons
input
Adjusts
CLK/CNT
Tape Eject.
Select
source.
DISPLAY
EJECT
close the disc tray.
Select numbered items in
35)
p.
off the TV.
TV PR +/--: Selects TV's channel.
remote control.
Open
(see
on or
*
Repeat sequence.
recording speed of the
This button is not available.
tape.
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
and press
Detach the
the buttons.
AAA AAA
Do not mix old and
8
new
batteries and
different
types of batteries such
alkaline,
etc.
as
never
standard,
mix
battery
battery
installation
cover on
the
rear
of the
control, and insert two batteries (size
AAA) with 3 and # aligned correctly.).
remote
Rear Panel
AERIAL
Connect the aerial
using
this
jack.
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
inputs.
TV with video and audio
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
(Y
Pb
Introducin
Pr)
OUT)
TV with Y Pb Pr
inputs.
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
EURO AV2 DECODER
Connect to
pay-TV
decoder
or
S-VIDEO OUT
Connect to
a
another video recorder.
(DVD
EXCLUSIVE
TV with S-Video
OUT)
input.
AC Power Cord
Connect to
a
power
source.
HDMI OUT
HDMI
quality
output providing
audio and video
OPTICAL
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
Connect to
using
this
jack.
Do not touch the inner
Electrostatic
IN+OUT / DVD
pins of the jacks on the rear panel.
discharge may cause permanent damage to the
unit.
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
RF.OUT
Connect to your TV
(VCR
or
a high
digital
(see p. 12).
interface for
Connections
S-Video connection
Caution:
Make
this unit is connected
directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phone in jack (record deck) of your audio system.
sure
Connecting to
(or Satellite)
Make
the
1.
on
For S-Video
or
the SCART
lead
on
the
socket
input
on
the
(T1).
Some TV broadcasters transmit encoded television
to this unit
or
If you use this connection, set the TV's
selector to VIDEO.
resolution
1.
or
2.
jack connection, resolu576p, however DVD/VCR
at 576i standard resolution.
1.
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
RF.OUT
jack
supplied
on
the
television's Antenna
"digital ready"
in
jacks on the DVD Player to the
jacks on the TV using the Y Pb Pr
Connect the Left and
Right AUDIO OUT jacks of
left/right in jacks on the TV
cables (A2).
this unit to the audio
using
the audio
Notes:
resolutions
are
Progressive
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
analog
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
AUDIO INPUT
SCART INPUT
RF antenna cable from the
Pr
panel
Input (R).
rear
Pb
Y
of this unit to your
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
SCART INPUT
AUDIO INPUT
S-VIDEO INPUT
C
Pr
R
Pb
A2
Y
VA 1
Decoder
(or Satellite)
T1
T2
S
Rear of this unit
Rear of this unit
(Basic connection)
(DVD
exclusive out
scan
video
S-VIDEO.
Rear of TV
AERIAL
Connect the
or
Connect the COMPONENT / PROGRESSIVE
576p and 720p
applied resolutions.
27).
high-definition
possible.
The
this unit.
2.
a
connection
SCAN VIDEO OUT
source
The encoded television signals (CANAL+ or
PREMIERE) are not decoded in the 1W Mode
Basic connection
at 576i
always
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
corresponding
cable (C).
For DVD/VCR VIDEO OUT
p.
must be set to 576i
Progressive Scan
Video /
If your television is
Notes:
always
connection, resolution
however S-VIDEO OUT is
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
(T2).
(DVD/VCR OUT) jacks on the
DVD Player to the corresponding in jacks on the TV
using the video cable (V).
Connect the Left and Right or AUDIO (DVD/VCR
OUT) jacks of the DVD+VCR to the audio left/right in
jacks on the TV using the audio cables (A1).
tion must be set to 576i
576p,
DVD exclusive out connection
Connect the VIDEO
(see
in
Component
or
VIDEO OUT is
Right AUDIO OUT or DVD/VCR
jacks of the DVD Player to the audio
jacks on the TV using the audio cables
rear
which you can only see with a purchased
rented decoder. You can connect such a decoder
2.
Connect the Left and
left/right
(A1).
signals
1.
jack on this unit to the
using the S-Video
the TV
standard resolution.
Connect the EURO AV1 AUDIO/VIDEO
(descrambler)
on
AUDIO OUT
(AV)
panel of this unit to
TV using a SCART
2.
cable
2.
input jack
(S).
Note:
of the
Basic connection
Connect the S-VIDEO OUT
S-Video
TV & Decoder
a
following connections, depending
capabilities of your existing equipment.
one
1.
connection)
Connections
Resolution
The resolution
(Continued)
Warning:
setting
Due to the DTS
DVD
setting support only
playback.
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
1. Before you set the resolution, this unit must be in
stop mode. Press STOP to stop playback.
2. Press RESOLUTION
setting
The current resolution
once.
will be appears in the
3. Press RESOLUTION
display
to
repeatedly
the
capabilities of
produce a strong,
window.
change
the
resolution you want.
To
The available resolution
are as
Notes:
If the audio format of the
according
to the connections
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
see
On-Screen
Display,
press AUDIO.
shown below.
Manufactured under license from
OUTPUT
Available Resolutions
"Dolby",
CONNECTIONS
HDMI
1920
720
COMPONENT
1920
VIDEO OUT
720
x
SCARTi
720
x
576i
S-VIDEOi
720
x
576i
1280
1080i,
576p
x
x
x
Dolby
Logic" and the double-D symbol
of Dolby Laboratories.
"Pro
trademarks
VIDEO OUT
Laboratories.
are
720p,
DTS and DTS
1080i, 1280 x 720p,
576p, 720 x 576i
x
Theater
Digital Out
Systems, Inc.
are
trademarks of
Digital
Rear of this unit
Note:
For
and 1080i resolution
720p
on
the
component
video out, only non-copy protected discs can be
played back.If the disc is copy protected, it will be displayed at the 576p resolution without HDMI cable
connection. With HDMI cable
may not be
connection, the picture
displayed properly
If your TV does not
support the resolution you have
set, the picture may not be displayed
properly.
Please read TV's owner's manual then set
the resolution that your TV
Connecting
to
can
accept.
or
Optional Equipment
DVD exclusive out
DVD/VCR OUT
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and
AUDIO OUT
Right
DVD/VCR AUDIO OUT
OUT) jacks on this
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
(DVD
EXCLUSIVE
or
unit
COA
Connecting to an amplifier equipped with two channel
digital stereo (PCM) or to an Audio/ Video receiver
equipped with a multi-channel decoder (Dolby
DigitalTM, MPEG 2 or DTS)
1.
Connect
one
of this unit's DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) to the corresponding in
your amplifier. Use an optional digital (optical
coaxial) audio cable.
on
2.
You will need to activate this unit's
(See
Digital
A
"AUDIO"
on
page
L
IAL
DIGITAL INPUT
jack
jack
R
AUDIO INPUT
Amplifier (Receiver)
Digital multi-channel connection
(DVD exclusive out connecttion)
or
digital output.
20).
Multi-channel sound
digital multi-channel
quality. For this
connection provides the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
sound
Rear of this unit
11
Prepa tion
HDMI Connection
If you have a HDMI TV or monitor, you
this DVD+VCR using a HDMI cable.
1.
Set the TV's
2.
Connect the HDMI OUT
source
to HDMI
connect it to
can
HDMI
compatible
TV
HDMI
to TV's Owner's
(refer
manual).
jack
monitor
3.
jack on the
compatible TV or
HDMI
on a
unit to the HDMI
H
(H).
Press RESOLUTION
repeatedly
to select the
desired resolution.
Notes :
?
Both PCM and Bitstream Audio out is
when the
sample frequency
available,
is set to 48kHz in HDMI
Rear of DVD+VCR
connection.
?
If Audio
setup is set to bitstream and your TV does
support Bitstream Audio out in HDMI connection,
audio sound may not output or
About HDMI
not
distorted.
?
When the
HDMI
connection,
Digital,
or
?
sound
no
DTS
or
or
noisy
sound
set the Audio
MPEG]
output with
are
option [Dolby
in the SETUP
menu
to PCM
Off.
The
HDMI
(High
the cable connector
face up for correct
the DVD+VCR.
alignment
body
should be
with the connector
Interface) supports
single digital connection for
players, Set-Top boxes, and other AV
use
with DVD
on a
devices.
HDMI
developed to provide the technologies of
(High-bandwidth Digital Content Protection).
is used to protect digital content transmitted and
was
HDCP
HDCP
arrow on
Definition Multimedia
both video and audio
received.
on
HDMI has the
or
capability to support standard, enhanced,
high-definition video plus standard to multi-channel
surround-sound
audio, HDMI features include
uncom-
bandwidth of up to 5 gigabytes
connector (instead of several cables
pressed digital video,
a
per second, one
and connectors), and communication between the AV
source
?
If there is noise
or
lines
on
the screen,
please
check
the HDMI cable.
?
Not all
HDCP-compatible
DVI devices will work with
?
?
If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
If the abnormal
HDMI
unit
picture
connection,
on
appears
on
the TV
screen
in
turn off the unit and then turn the
again.
Tip:
?
When you
resolution
use
HDMI
connection, you
(576i, 576p, 720p, 1080i)
can
change
the
for the HDMI
output.
?
The HDMI will out at
the resolution to 576i
12
if you set
the HDMI connection.
576p resolution,even
on
as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface
HDMI
this unit.
and AV devices such
are
trademarks
licensing
LLC.
or
registered
trademarks of
Before
Operation-VCR part
in
Tuning
a
video channel
on
your
TV
for the very first
time
Video channel
is the channel
(RF output channel)
which your TV receives picture and sound
the DVD+VCR through the RF cable.
If you have used
a
signals
channel is
for
optimum
video
play-
as
tuning
TV
shown "ACMS"
on
stations, please
(see p.15).
your TV.
on
Perform the
following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connection to AV
connection,
or
vise
1.
Turn
2.
Set the vacant
position
Press POWER
on
3.
on
DVD+VCR and TV.
the remote control to enter the
by mode (the
dimmed).
stand
4.
clock indicator will be
Press and hold PROG.
for
more
your TV.
on
(v
V
or
)
on
the DVD+VCR
than 4 seconds.
RF 36 will appear in the display.
following picture will be displayed
The
on
the TV
screen.
RF
If the
is
5.
picture
is snowy,
CHANNEL
Press PROG.
(v
video channel to
68 which is not
or
V
36
move
clean, press POWER
)
to
step
5. If the
picture
on
the DVD+VCR to finish.
on
the DVD+VCR to set the
position between 22 and
occupied by any local station in your
a
vacant
area.
Note:
The RF channel will not
change
until
step
6 has
been executed.
6.
Press POWER to store the
new
into the DVD+VCR memory.
Now tune your TV set to the
RF video channel
new
DVD+VCR RF
channel.
Note
If the TV
TV.
picture
was
clear in
ACMS
Pr-12
ACMS
versa.
36
step 4, do
when
you have just connected your video recorder for the
very first time.
To make
display
the TV
Following picture
from
SCART lead you will not have to
already pre-tuned
will
on
TV, simply select the AV channel. The AV
tune your
back
Using your VCR
not retune your
screen
follow
stages
3 to 4
Prepa tion
Before
Setting
Operation-VCR part
the clock
To
Manually
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
1.
the colour
1.
Press i.
2.
The main
3.
Press i.
s et
Press 1
menu
or
system
will appear
on
the TV
screen.
2 to select the SYS and press
ENTER/OK.
Press b or B to select SET.
Press ENTER/OK.
4.
Press 3
or
4 to select
according
to the COLOUR
system used.
HHMMDDMMYY
--
:.
-
-
--
--
--
---
.
SYS
12
i
SET
SYS
fOSD
ON
OFF
2.
Use the v
V on
or
the remote control to alter the
5.
HOURS, MINUTES, DAY, MONTH and YEAR.
day
of the week will appear
automatically
Press 2 to select the RF AUDIO.
Press 3
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The
i
or
4 to select
according
to the RF AUDIO
used.
when
you enter the year.
SYS
SYS
fOSD
ON
OFF
i
HHMMDDMMYY
8
:.
0010106SUN
6.
.
12
SET
3.
If you make
a
i
mistake press b
or B
correct details.
4.
Press i to return to
14
a
TV
picture.
and enter the
Press i to
remove
the
menus
from the TV
screen.
Before
Operation-VCR part
How to
This DVD+VCR
menus
The
the main
use
menus are
be
easily
can
displayed
Tuning
menu
programmed by using
the
by
the Remote Control
please
Handset.
Switch
your TV set and DVD+VCR
POWER button.
1.
on
by pressing
the
The main
2.
will appear
menu
on
the TV
signal
is weak your DVD+VCR may
turn to the MANUAL TUNING section
on
page
Prepa tion
16.
1.
Press i button.
2.
If the TV broadcast
Automatically
not detect the necessary information and will not be
able to store them correctly. To overcome this problem
on screen.
controlled
in TV Stations
screen.
Press POWER to turn
on
your DVD+VCR.
Press i button.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Press ENTER/OK.
SET
SYS
fOSD
ON
OFF
ACMS
Pr-12
SET
REC
Timer
-
PR SET
ACMS
SET
SYS
-
-
-
-
recording setting (see
Manual
tuning setting (see
24).
p.
ON
OFF
16).
ACMS
(Automatic Channel Memory
System) (see p. 15).
Date & clock
setting (see
To set the Colour TV
1 W ON/OFF
(Dr.)
p.
-
-
p.
a
problem
3.
Pr-12
ACMS
Press ENTER/OK
ing
(see
p.
p.
again
to start the automatic tun-
process.
14).
System (see
Power Save Mode
To check
Pr-12
fOSD
14).
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
27).
with your VCR
S
E
Pr-12
(see
27).
p.
F. OSD ON/OFF
To
-
ACMS
display
the
operational
mode of your VCR
(see
(16:9/4:3)
-
p.
4.
completed.
26).
To select the
The TV STATION TABLE will appear when
aspect ratio of your
TV
DECODER
(OPR)
O
NIC
-
-
-
(see p. 27).
To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 26).
improve the playback picture
(see p. 22).
Appear when playback only.
sound
or
(see
deactivate the NICAM
p.
digital
26).
Tip
You
3.
change the menu language on the DVD setup
(See the Menu Language on page 19.)
can
menu.
Press 1 and 2 to select the desired
Press ENTER/OK and
4.
Press i to return to
a
use 3 or
TV
picture.
menu.
4 to select.
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P
SET
R
To
To activate
02
5.
Press i to
save
your
PR-07
PR-08
MOVE
:
DELETE
:
settings.
,
tuning
is
Before
Tuning
In certain
Operation-VCR part
in TV Stations
areas
of the
Manually
country broadcast signals may
be too weak for your DVD+VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
ually
1.
MFT
STATION
CHANNEL/CABLE
:
AV
P
SET
R
6.
Press i.
menu will appear on the TV
Press 1or2toselectthePRSET.
CH
C04
man-
in order for your DVD+VCR to store them.
The main
PR
04
Press 2 to select STATION
that you may
so
name
your TV station.
Press ENTER/OK.
screen.
Press ENTER/OK.
7.
Use 3
or
station
name.
Use 1
4 to select letters and numbers for the
2 to
or
move
back and forth between
characters.
Press ENTER/OK.
Pr-12
ACMS
SET
SYS
fOSD
ON
OFF
PR
CH
01
MFT
STATION
00
PR-03
AV
:
CH
MFT
C04
00
STATION
P
SET
R
8.
CHANNEL/CABLE
PR
04
Press
i, confirm the station placement.
P
SET
R
2.
Press i.
The station table will appear.
3.
Press 3
or
PR
CH
MFT
04
C04
00
4 to select the programme number that
you want to tune
(for example,
PR
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
05
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
P
SET
R
MOVE
:
DELETE
:
04).
P
SET
R
If you wish to
8.
stages 3
manually
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
05
,
07
08
Press ENTER/OK.
Press AV to select C
(Standard stations)
or
S
tune other stations
repeat
-
06
4.
STATION
(Cable
--
--
-----
--
--
-----
--
--
-----
--
--
P
SET
R
-----
MOVE
:
DELETE
:
,
stations):
C02
-
C69, S01
-
9.
S41.
Enter the channel number of station that you want to
tune,
4 to find the
use 3 or
PR
CH
MFT
04
--
required
station.
----
:
AV
P
SET
R
5.
Searching
will
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
again.
new
TV station has
DVD+VCR.
STATION
CHANNEL/CABLE
Press i
Your
3 or 4.
now
been tuned into your
Before
Operation-VCR part
the order of TV Stations
Changing
tuning TV stations into your DVD+VCR you may
change the order in which they are stored without having to retune them again. The instructions given
on this page will show you how you can simply move
TV Stations
Deleting
After
After
wish to
wish to delete
tuning
TV stations into your DVD+VCR you may
a station.
The instructions
you
easily
can
given on this page will show you how
delete any unwanted TV stations.
them into your desired order.
1.
1.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
menu will appear on the TV
Use1or2toselectthePRSET.
screen.
PR
PR
CH
MFT
STATION
00
PR-03
ACMS
SET
CH
01
SET
:
PR-03
CHANNEL/CABLE
ON
OFF
CHANNEL/CABLE
STATION
00
SYS
fOSD
SYS
ON
OFF
MFT
Pr-12
ACMS
Pr-12
fOSD
screen.
Press ENTER/OK.
Press ENTER/OK.
01
Prepa tion
Press i.
The main
:
AV
P
SET
R
AV
P
SET
R
2.
2.
Press i.
Press i.
Press 3
want to
or
4 to select the
move
programme number you
3.
Press 3
or
4 to select the
want to delete.
(for example, PR-03).
programme number you
(for example, PR-01)
Press 2.
02
C02
00
PR-02
01
C01
00
PR-01
01
C01
00
PR-01
03
C04
00
PR-04
02
C02
00
PR-02
02
C02
00
PR-02
04
05
03
04
05
06
07
08
C04
00
04
PR-04
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
P
SET
R
MOVE
:
DELETE
:
C04
00
--
-----
--
--
-----
--
--
-----
--
--
-----
07
08
Press 3
want to
or
to
programme number you
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
--
--
-----
--
--
-----
--
--
-----
a
short
-----
--
--
-----
MOVE
:
DELETE
:
,
If you wish to delete other TV stations
3-4.
03
07
04
08
--
--
05
07
P
SET
R
08
other TV stations
move
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
P
SET
R
remove
--
C03
the
00
PR-04
--
-----
00
PR-03
--
--
-----
--
--
-----
--
--
--
--
P
SET
R
Press ENTER/OK.
The selected programme will be moved to the
programme number.
04
C02
repeat stages
-----
06
Press i to
--
while, the selected station will be
02
06
5.
-----
--
deleted.
05
If you wish to
1-4.
--
Press 1.
After
(for example, PR-05).
04
4.
PR-03
--
P
SET
R
,
4 to select the
move
-----
00
P
SET
R
4.
3.
--
C03
06
PR-04
--
--
new
repeat stages
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
5.
Press i to
remove
the
-----
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
Displaying
Disc Information
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
Initial
Settings
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu
item,
see
pages 18 to 21.
information.
The items
type
displayed differ depending
playing status.
or
on
the disc
To
display
and exit the Menu:
Press SETUP to
the
display
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
1/3
1/12
To go back to the previous level:
Press b on the remote control.
0:20:09
General
1 ENG
ABC
1.
1/1
Operation
Press DVD
on
3D SUR
the remote control.
LANGUAGE
Menu
2.
You
select
can
change
Title
an
item
select the
or
(Track)
--
by pressing v / V and
setting by pressing b / B.
Current title
(or track)
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
number/total
number of titles
(or tracks)
Current chapter
number/total number of
Chapter
chapters
Time
Elapsed playing
time
Audio
language
--
--
Subtitle
Angle
Sound
Selected audio
--
--
--
--
2.
or
3.
angle/total
number of
angles
Setup
move
The
If
button is
pressed
display disappears.
no
for
a
few
seconds, the
on-screen
4.
shows the current
item,
option
then press B
as
well
as
setting for the
setting(s).
alternate
Use v / V to select the second desired
press B to
5.
appears.
to the second level.
screen
selected
Note:
menu
Use v / V to select the desired
to
Selected sound mode
Select
Press SETUP.
The
channel
Selected subtitle
Selected
Move
move
option
Use v / V to select the desired
setting
then press
ENTER/OK to confirm your selection.
Some items require additional steps.
6.
18
Press SETUP
then
to the third level.
or N
exit the
Setup
menu.
Before
Operation-DVD part
LANGUAGE
DISPLAY
DISPLAY
LANGUAGE
TV
Menu
Language
Aspect
16:9
English
Display
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
TV
Mode
Output
Widescreen
Select
RGB
Move
Move
Menu
Language
Select
a
language for the
display.
VCR and DVD's
setup
menu
and information
TV
Aspect
4:3
:
16:9
Disc Audio / Subtitle / Menu
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original:
disc
was
original language
track
in which the
recorded.
language, press number
buttons then ENTER/OK to enter the corresponding
number
Select when
:
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
according to the language code list in
the reference chapter (see page 36). If you enter the
wrong language code, press CLEAR.
DVD
Mode
Display
Display
Other: To select another
4-digit
DVD
DVD
Select the
Refers to the
Prepa tion
Select
Select
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
entire
TV
Automatically displays the wide picture on
and cuts off the portions that do not fit.
the
screen
Output
Select
Set this unit TV
TV connection
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
19
Before
Operation-DVD part
LOCK (Parental
AUDIO
Each DVD disc has
a
Set this unit's AUDIO
audio
system you
variety of audio output options.
options according to the type of
Control)
LOCK
use.
Rating
Unlock
Password
New
Area Code
RU
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Select
Rating
Move
Select
Blocks
playback
Not all discs
Dolby Digital
DVD
/ DTS / MPEG
DivX
1. Select
Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an amplifier
other
or
equipment
with
Dolby Digital,
a
DTS
this unit passes each
further processing.
Check the documentation for your
amplifier
to
verify
(Dynamic Range Control)
You
thanks to
possible,
digital
audio
technology. However,
dynamic range of the
from 1 to 8
can
enter
or
one
(1)
2. Follow
step
2
as
on
shown above
3. Press SETUP to exit the
If you
Press SETUP to
2.
Input
Vocal
Set to On
playing.
only
when
mal stereo sound.
20
a
multi-channel karaoke DVD is
The karaoke channels
the
6-digit
ENTER/OK. The
DVD
on
the disc mix into
nor-
then press B.
(Rating).
menu.
forget your password
If you
lower volume without
Set DRC to On for this effect.
menu
change the password, press ENTER/OK when the
"Change" option is highlighted. Input a password and
press ENTER/OK. Enter it again and press
ENTER/OK to verify.
1.
This allows you to listen to a
losing clarity of sound.
selection,
To
and the
a
has the most restrictions
the LOCK
forget your password,
following steps:
quietest ones).
the v / V buttons.
is the least restrictive.
you may wish to compress the
audio output (the difference between the loudest sounds
movie at
using
change password.
1. Select Password
DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
rating
Password
its
With the DVD
then press B.
4. Press ENTER/OK to confirm your rating
then press SETUP to exit the menu.
capabilities.
DRC
menu
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
DVD
type of signal through without any
a
Rating 1-8: Rating
rating eight (8)
(for DTS): If you select "Off", the DTS signal is
not output through the DIGITAL AUDIO OUT jack.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
the LOCK
on
and
Off
made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.
"Rating"
3. Select
audio.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
their content.
Input a password and press ENTER/OK. Enter it
again and press ENTER/OK to verify. If you make a
mistake before pressing ENTER/OK, press CLEAR.
/
Sample Freq. (Frequency)
on
rated.
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
or
MPEG): Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
(for Dolby Digital
of rated DVDs based
2. To
MPEG decoder.
PCM
are
display
you
the
can
clear it
Setup
using
menu.
number "210499" and press
password is cleared.
the
Before
Operation
DVD
-
DivX(R) VOD
DVD
Area Code
Enter the Area Code whose standards
rate the DVD video
reference
based
disc,
chapter (see
Select "Area Code"
1.
part
We
provide you the DivX VOD (Video
registration code that allows you to rent
used to
videos
36).
page
the LOCK
on
were
the list in the
on
menu
then press
B.
Follow
3.
Select the first character
4.
Press B and select the second character
2
step
as
shown left
(Rating).
using
the DivX
and
VOD service. For
Demand)
purchase
more
informa-
tion, visit www.divx.com/vod.
1.
2.
using
On
2.
Select
"DivX(R)
VOD"
option
then press B.
Press ENTER/OK while "Select" is selected and the
registration code will appear.
Use the registration code to purchase
v / V buttons.
using
videos from DivX
v / V buttons.
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
Press ENTER/OK to confirm your
5.
area
code
download the video onto
selection.
a
disc for
playback
on
this
unit.
3.
OTHERS
Press ENTER/OK to exit.
Note:
The PBC and Auto
Play
and
Divx(R) settings
can
be
changed.
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
this unit.
OTHERS
On
PBC
.
Auto
Off
Play
DivX(R)
VOD
Select
Select
Move
PBC
Set
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
Audio CDs.
Auto
You
cally
can
set up the DVD+VCR
starts
If Auto
DVD
Play
Play
playing
so a
DVD disc automati-
whenever the DVD is inserted.
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
time and
Note:
The Auto
Play
function may not work for
some
DVDs.
21
Prepa tion
Operation
Playing
You will
tape
5.
tape
a
only
with
be able to load and
eject
video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC
tapes (on
Getting
When
PAL
a
better
a
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE)
Slow motion
To switch off the slow motion and
shuttle, press the
desired function.
TV).
slow motion and
During
picture
appear
cassette is inserted and
playback started, the
works to get the best possithe quality of the recording is
automatic
tracking function
picture automatically. If
poor, repeatedly press 3 or
manually adjust the tracking
ble
the
on
shuttle, the noise bars may
picture according
to the status of
tape.
If distortions
be
can
seen
in the
picture,
reduce them
withvorV.
the remote control to
4 on
until any distortions have
6.
Press STOP to end
playback.
Press EJECT.
been removed.
If the end of the
1.
Make
tape is reached, your DVD+VCR
stop playback automatically, rewind, stop, eject
the tape.
that you have correctly connected your
DVD+VCR as described earlier in this book.
sure
on your TV.
Press POWER to turn
will
Turn
on your DVD+VCR.
Insert the video cassette into your DVD+VCR.
The video cassette should have the window side
up and the
facing
2.
Press N to start
If you load
a
arrow
facing
away from you.
your tape.
video cassette which has had its record
of the cassette will
While
playback.
tape is playing press CM SKIP
control to
commercial
skip
Repeatedly
AUTO TRACKING
1 Press 30 seconds
tracking
to
give
automatically adjust
picture quality.
Press PAUSE/STEP
by
picture.
repeatedly to advance
a
the
tape
frame.
can be paused for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to
prevent damaging the tape or your DVD+VCR
Tapes
.
picture quality
can
be
the remote
press CM SKIP to
skip:
3 Press 90 seconds
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Still
on
another programme
2 Press 60 seconds
the best
Press PAUSE/STEP to still
frame
the
(or
material).
start
Your DVD+VCR will
3.
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
playing
protection tab removed, playback
automatically.
CM
improved slightly by using
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum
Picture
Response)
This feature
automatically improves playback picture
quality by adjusting your DVD+VCR to the condition
the
tape. Please
appear in
play
note that the OPR icon
that mode when
playing
a
(
)
will
of
only
tape.
vorV.
4.
Press N to continue
playing
your tape.
Double
speed playback
Press the "N" button during normal
playback. The tape will play back at double speed
1.
Press i.
2.
Press b
3.
Press ENTER/OK.
4.
and without sound.
Press the "N" button to return to
normal
Press
3
or
B to select
or 4
(OPR).
repeatedly
to select:
SHARP. Please note you may
playback
at
speed
playing
5.
a
tape.
Press i return to
screen.
Picture search:
back press either BACKWARD or
FORWARD to this will enable you to rapidly wind
the tape see where you are on the tape.
During playing
Logic search:
During fast forwarding or rewinding press and hold
m or M the picture will be played back at 7 times
normal playback speed.
22
Pr-12
P
R SET
fOSD
ON
OFF
ACMS
OFF
SOFT
SHARP
OFF, SOFT
only
or
set OPR when
Operation
with
Instant Timer
tape
7.
Recording (ITR)
Your DVD+VCR allows you to make
of simple methods:
recordings using
ately
for
runs
out.
set
a
incorporates Long Play (LP)
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up
to 180 minutes
using Standard Play (SP); using LP you
will be able to record up to 360 minutes. Please note
there will be a slight loss in picture and sound quality
when
1.
Make
sure
2.
Insert
on
your DVD+VCR.
video cassette with
a
tab into your
protection
The video cassette should have the window side
facing
up and the
Press
3 or 4
arrow
facing
away from you.
to select the programme number you
wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4.
If you wish to record directly from the SCART or
RCA jacks, repeatedly press AV until the socket you
wish to record from is
AV 1 for
the
displayed.
from EURO AV1 SCART
recording
jacks
on
of your unit.
AV 2 for recording from EURO AV2 DECODER
rear
jacks
on
AV 3 for
(Left
5.
&
the
of your unit.
recording from VIDEO IN and AUDIO IN
rear
Right) jacks
on
the front of your unit.
Press LP if you wish to record in
Long Play
or
Standard
Play.
SP will produce improved picture
however LP will provide twice as
time
6.
as
and sound
much
quality,
recording
SP.
Press REC/ITR
Press REC/ITR
on
on
the remote to start
recording.
the remote several times.
Each successive press will increase the record time
30 minutes until you reach a maximum of 9
by
hours.
If you do not wish to record
pen quite easily
tab on the back
on a tape (this can hapby accident!) remove the protection
edge of the video cassette.
possible to record on a video cassette
protection tab removed by covering
with self adhesive
DVD+VCR.
3.
Notes:
record
that you have correctly connected your
as described earlier in this book.
Press POWER to turn
recording.
Press EJECT.
It is
DVD+VCR
recording.
paused for up to 5 minutes; RECP will
when a tape is paused. After 5 minutes
Press STOP to end
LP.
using
unwanted
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
8.
which
be
Tapes
be displayed
can
Recording (ITR) start recording immediperiod of time or until the video cassette
Your DVD+VCR
recording
Press PAUSE/STEP to continue
a
variety
Instant Timer
Press PAUSE/STEP to avoid
scenes.
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press TV/VCR to select TV mode and then
a different channel on your TV.
selecting
Operation
with
Operation
tape
recording using On Screen
Display
Timer
You may set up to seven timer record events within
month of the current date.
PR
DATE
TIME
PR-03
one
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
--
~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SUMOTUWETHFRSA
Note:
Before
sure that you have set the
correctly and you know which stations
you have tuned TV stations on your DVD+VCR.
setting
the timer make
6.
Use v/V/1/2 buttons to enter the
recording
start and
end times of the programme that you wish to record.
DVD+VCR clock
Please note your DVD+VCR uses a 24 hour clock.
1pm will be displayed as 13:00.
e.g.
1.
Insert
a
video cassette with
protection
tab into your
PR
The video cassette should have the window side
facing
2.
up and the
away from you.
facing
arrow
DATE
PR-03
DVD+VCR.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
7.
Press B to select the
Press v
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
--
-~
IP,
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
PR-03
setting
the timer record
event.
Use the PR/TRK
(v/V)
to enter the station that you
wish to record then press 2.
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
Note:
If all timer record events are full press v or V to select
the event that you wish to remove and replace.
Press b to delete the event.
Use the PR/TRK
(v/V)
to enter the date of the
programme.
If you press ENTER/OK before
you may select one of the
recording features.
Press 1
or
2 to
entering the date
following automated
select, then press ENTER/OK
to
confirm.
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
tape is left and
necessary, to
,
PR
Press ENTER/OK to start
same
Saturday
and
time every week.
tape speed (SP,
LP).
speed from SP to LP, if
complete recording the program.
SP
--
recording speed.
V to select the desired
switches
SP
--
or
or
IP mode determines how much
SP
--
DELETE:
5.
::
).
Press ENTER/OK.
4.
SP
~
--
Press i.
Press1or2toselectREC(
3.
TIME
41 4 ::
00 1 5
--
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
Operation
with
tape
recording using On Screen
Display (Continued)
Timer
8.
Press i to set another timer record event and follow
steps
3 to 7.
Check that the timer event details
Press i return to
are
correct.
screen.
If PLEASE CHECK is
incorrectly
9.
displayed, you have entered
and will need to re-enter the data.
Press POWER to switch your DVD+VCR to Timer
Standby mode.
Note:
The 1W Mode is not available in the
mode for the timer
standby
recording.
The timer
symbol (
) will appear in the display
window while your DVD+VCR waits to make the
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
Timer
Recording
During
timer
automatically
power off when
ends.
recording standby mode, the DVD
operated. To use the
and
VCR mode cannot be
DVD+VCR, press POWER. After you use the DVD or
VCR, press POWER again to put the VCR into timer
recording standby
mode.
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use v
the
or
V to select the event that you wish to delete
or
change.
Press b to delete the event...or
Press ENTER/OK to
change;
then press b
or
B to
select; Station, Date, Start and End times and
recording speed.
Press v
or
V to enter the correct
information.
If Timer record events
Make
sure
Overlap...
that the
events do not
preset times of the timer recording
overlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
will be recorded.)
2
Operation
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record
In addition it has
a
VCR part
-
Tape Counter Memory Stop
System
and
playback Hi-Fi stereo sound.
digital stereo sound
to record and playback the
stereo NICAM
decoder. This allows you
sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
The
Digital Tape
play
window instead of the time
displayed on the disby pressing CLK/CNT
on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1.
Counter
be
can
Press CLK/CNT.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
Press CLEAR to set the counter to 0:00:00.
audio
The
1.
system, video disc
Your VCR's NICAM
Press N
another Hi-Fi VCR.
or
sound decoder allows
digital
or
start
recording.
tape counter will display the actual play time in
hours, minutes and seconds.
you to enjoy broadcasts with NICAM sound, as well
as standard stereo, bilingual and mono sound. The
2.
Press x when
playback
or
recording
is
complete.
Press m.
particular type of sound received or that recorded
will be briefly displayed on the TV screen for a
couple of seconds:
The
tape will rewind and automatically stop when
the counter returns to 0:00:00.
STEREO NICAM
Sound is
and
automatically
mono
recorded
tracks of the video
the Hi-Fi stereo
on
To set the decoder
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
the Hi-Fi tracks and the
on
tape without any separation.
until the desired audio mode
repeatedly
We have
already described, how to connect a decoder
pay-TV station as CANAL+ or PREMIERE on page
10. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
for
1.
appears.
3.
Press F
The choice is
STEREO, LEFT, RIGHT and MONO.
In BIL NICAM
playback
the
primary language is outthe secondary channel is
the right channel when
put on the left channel and
output simultaneously from
audio output is set to STEREO.
The primary language will be output from both chanPlease note that
setting is MONO.
when adjusting the tracking
2.
On Screen
Display (F.OSD)
You may easily
amount of tape
display the current time or tape counter,
left, day, month, year, day of week,
channel,
programme
tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the
tape.
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
The
to
display options.
tape
tape left will appear if there is
2.
cycle through
a
tape loaded.
After 3 seconds the
Displays
will clear
majority of the
leaving only the
counter and the amount of
Press CLK/CNT
the TV
screen.
again
the
counter and amount of
to
On Screen
clock
tape left
remove
all
on
or
the
tape
screen.
displays
from
Press D
ON:
will appear
on
the TV
screen.
G to select the DECODER.
or
E to select.
When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
3.
control Hi-Fi stereo sound may revert to MONO.
menu
or
Press ENTER/OK.
nels when the audio
1.
Press i.
The main
Press i to return to
a
TV
picture.
Additional
Operation
VCR part
-
Wide Screen
Compatibility
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
Your DVD+VCR
record and
screen.
format programme
Video Doctor
1.
(Self-Diagnosis)
Press1or2toselect
back wide
play
aspect ratio programmes (16:9). To record
successfully
by
screen
wide
a
the correct
must be broadcast
signal
screen
Press i.
can
16:9
type
screen
of wide
the TV station.
Operation
.
1.
Press ENTER/OK.
Switch
your DVD+VCR.
on
Press i.
PressForGtoselect
ANTENNA CONNECT
HEAD STATUS
.
Press ENTER/OK.
TAPE STATUS
NO. OF TIMER PROGRAMME
12
NEXT TIMER PROGRAMME
Pr-12
P
RSET
ACMS
SET
SYS
PLEASE CHECK
fOSD
ON
OFF
i
12
2.
Press
3 or 4
to check
a
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
P
SET
R
jack securely.
2.
HEAD STATUS
PLEASE CLEAN:
Clean your video heads.
NEXT TIMER PROGRAMME
PR-01 26 10:00~11:00SP
Shows the current status of timer
Lock
place
1.
Wide-Screen and Normal programmes
so that your unit
the remote control.
as
normal.
recording
for
format
playing back and recording
recordings (16:9).
Press i to
To
enjoy
remove
the
menus
Normal format
Wide-Screen
from the TV
Wide-Screen
your VCR to the TV
recording.
from the TV
and
16:9:
3.
playback you
using a SCART
screen.
must connect
cable.
screen.
(Power
save
Mode)
Set 1W ON/OFF to ON to
the front of the unit
switched off
i
repeatedly to select: AUTO, 4:3 or 16:9.
(Playback mode only)
Automatically plays back Wide-Screen programmes
Only
(Child Lock)
on
4:3
16:9
Press v/V
1W Mode
The control buttons
using
menus
ON
OFF
Only for playing back
recordings (4:3).
O
the
ON
OFF
AUTO S
4:3
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
remove
P
SET
R
SYS
fOSD
as
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
Press i to
Pr-12
SET
ACMS
fOSD
AUTO
O
3.
12
Pr-12
problem.
can
only
be
can
be
operated
place your DVD+VCR into
economic power save mode.
Nothing is displayed in the display window.
1
Press i.
The main
Press LOCK.
Press F
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons on the front of your unit are
SAFE will flicker in the display window for
pressed
a
few
an
menu
or
will appear
on
the TV
screen.
G to select the 1W ON/OFF.
Press ENTER/OK.
2.
Press D
3
Press i.
or
E to select the ON.
seconds.
Notes:
2.
Press LOCK
again
to switch off the child lock.
OFF will appear in the
display
window.
Some function may not be
?
operated
in the 1W Mode.
The 1W Mode is not available in the
standby mode
recording and when turn Power off of the
DVD+VCR after receiving the encoded television signals (CANAL+ or PREMIERE).
for the timer
?
The encoded television
MIERE)
are
signals (CANAL+
or
PRE-
not decoded in the 1W Mode.
27
Additional
from External
Recording
You
Operation
record from
can
camcorder
DVD+VCR's external
1.
Make
sure
Press AV
Components
component, such
as a
to any of the
inputs.
that the
from is connected
2.
external
an
VCR, connected
or
VCR part
-
component you
properly
repeatedly
want to record
to the DVD+VCR.
to select the external
You
recording
the
of your unit.
recording from EURO AV2 DECODER
on
&
(Left
3.
Load
4.
Set
5.
the
from EURO AV1 SCART
recordable
on
to
jacks
4.
tape
or
Press REC/ITR
Press STOP to
or
LP)
as
necessary
by
on
component. If
your DVD+VCR, you
the Remote Control
once
5.
lights
?
in the
display
window.
confirm the
?
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
Copyright on page 5 for more details.
fixed
length
of
recording
start
recording,
position.
a
from
manually
to
begin
time,
playing,
press STOP to
copying.
If the DVD you
are
tected, you will
not be able to copy the disc. It is not
attempting
?Y
ou
must
to copy is copy pro-
encoded DVDs
the
display
(or
window.
stop the copy process manually when the
ends, or the unit may rep lay and record
DVD movie
?
Recording.
point
the Remote Control.
permitted to copy Macrovision
Discs). "LOCK" is displayed in
?
record for
want to
Notes:
stop recording.
Before
on
When the DVD is finished
over
o
place on the DVD from which you
dubbing using the N, BACKWARD,
Press REC/ITR
end
to start
Notes:
Timer
tape into the VCR deck.
you may need to press N
disc in the external
The REC indicator
?T
blank VHS video
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
recording.
7.
a
For best results, pause playback at the
which you want to record.
on
tape.
you have a TV attached to
can see the video playing.
6.
tape.
copying.
recording mode (SP
pressing LP repeatedly.
the
VHS
Find the
start
the front of your unit.
a
Play
a
Insert
rear
Right) jacks
a
DVD to
2.
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
jacks
a
FORWARD and PAUSE functions.
AV 1 for
rear
copy the contents of
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
record from.
AV 2 for
can
1.
3.
input
from DVD to VCR
Copying
see
Instant
and
over
again.
When you stop the DVD
the recording on VCR is
playback during copying,
stopped automatically.
General
Playback
Buttons
features
DVD Part
-
Operations
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
or
closes the disc
repeatedly
or
to
playback.
Operation
play Frame-by-Frame.
press .
During playback,
ter/track
tray.
press X to pause
During playback,
Press X
./>
Discs
to return to the
or
> to go to the next
of the current
chap-
beginning
chapter/track.
Press . twice
briefly
to
step back
to the
previous
chapter/track.
m/M
During playback, press
required scan speed.
m
or
M
DVD, DivX disc; 4 steps
CD, MP3, WMA, Audio CD
Video
While the
repeatedly
; 3
playback is paused, press
(4 steps, forward only).
to select the
steps
M
repeatedly
to
play
in
slow motion
REPEAT
press REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point A
point B and repeats a sequence from point A (Starting
point) to point B (End point). Press CLEAR to exit.
and
ZOOM
During playback or pause mode, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBvV
video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback
playback.
(ANGLE)
in
stop mode, press RANDOM for random
If the current DVD title has
on
DISC MENU
or
the
screen.
The disc
menu
a
menu, the title
Otherwise, the disc
appears
on
the
menu
menu
appears
may appears.
screen.
During playback of DVD disc contains scenes recorded differcamera angles, press ANGLE repeatedly to select a
desired angle.
ent
(SUBTITLE)
During playback, press SUBTITLE repeatedly
language.
to select
a
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
audio
to hear
a
different
Playing
Notes
?
a
DVD
general
on
Video CD
or
features:
Marker Search
OnaVideoCDwithPBC,youmustsetPBCtoOffon
setup menu to use the repeat function (See "PBC"
on page 21).
To enter
Marker
a
the
?
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
(Track)
start
can
points.
desired
point
the TV
screen
on
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
To Recall
or
will blink
1.
During
disc
search
menu
the TV
angles
possible.
is
?
The A-B
current
screen
during
recorded at
angle switching
2.
repeat function is available only in the
chapter/track.
4.
You
can play any marker
the marker search menu.
Last Scene
This
player
remove
player.
Press DISPLAY
the
during playback.
by inputting
its number
option
will be
option.
highlighted.
memorizes last
scene
from the last disc that
remains in memory even if
the disc from the player or switch off the
scene
If you load a disc that has the
is automatically recalled.
scene
memorized,
scene
This
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
effect, select "Normal".
player
does not memorize the
you switch off the
disc.
player
before
scene
of
commencing
a
disc if
to
play
Screen Saver
1.
2.
Press AUDIO
The
during playback.
"3D SUR." appears
on
To return to normal
playback, press AUDIO repeatdisappears from the menu
edly
the
until "3D SUR."
Time Search
playing
at any chosen time
on
the disc:
1.
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
"--:--:--" appears.
3.
Use numerical buttons to
input
the
required
start
time in
hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press CLEAR
to
remove
the numbers you entered. Then
input
the
correct numbers.
4.
Press ENTER to confirm.
selected time.
Playback
starts from the
appears when you leave the DVD
mode for about five minutes.
screen saver
player
menu screen.
screen.
To start
on
Note:
4 to select the sound
The sound
3.
starts from the marked
Memory
is viewed. The last
you
or
marker
3D surround effect that simulates multi-
a
speakers (instead of the
speakers normally required for multi-channel audio
a home theater system).
Use 3
playback
a
Or, Press CLEAR and the marker number is
five+
2.
press SEARCH. The marker
appears on the screen.
playback,
Press ENTER and
channel audio from two stereo
1.
Marked Scene
erased from the list.
3D Surround
from
a
seconds, press b / B to select
number that you want to recall or clear.
3.
Additional features
produce
Clear
Within 10
scene.
To
on
markers.
scenes
indication that
as an
the disc. The Marker icon appears
to enter up to nine
briefly. Repeat
Zoom may not work
on
marker, press MARKER
a
?
different
from up to nine memorized
at the
playback
To enter
?
on some
DVDs.
You
in
Stop
the
Playing
This unit
can
Audio CD
an
Audio CDs
play
MP3/WMA file
or
MP3/WMA files record-
or
ed media.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
ENTER and
playback
playback
a
or
track/file then press PLAY or
can use variable
functions. Refer to page 29-30.
1/12
List
Program
1-Music1
Track3
3-Music3
Track5
4-Music4
Track6
5-Music5
3.
6-Music6
Track7
Clear All
Clear All
7-Music7
PROGRAM Edit
DISPLAY
4.
ID3 TAG
When
?
track
playing
file
a
titles, you
information such
containing
can see
the information
as
by pressing
5.
Genre
]
Tips:
Press DISC MENU to
?
move
6.
to the next page.
?
as
top
of the
menu
is
highlighted.
with this
compatibility
player
is
?
48 kHz
within
Sampling frequency:
(MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384 kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre-
-
program edit mode,
"List", then press ENTER
to
Select the track you want to start
"Program" list.
Press PLAY
or
ENTER to start.
playing
on
the
in
Playback begins
"Program"
list have
To
normal
resume
played
playback
track
a
?
Track:
?
All:
?
Off(No display):
once.
on
from
programmed play-
the list and then press PLAY.
Tracks
a
desired
repeat mode.
the current track
repeats
repeats all the tracks
does not
the "Program"
play repeatedly.
list.
on
If you press > once during
the repeat playback cancels.
Repeat
Track
playback,
-
File
an
ISO 9660 file
names
must
incorporate
They
should not
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
1.
2.
a
a
3.
"Program"
During
STOP
the
mark will appear
E
mode,
List
press PROGRAM and
Use vVbBto select the track that you wish to
from the Program list.
Press CLEAR.
tracks
1.
/ ?
folder should be less
Track from
erase
an
The total number of files in
than 1190 files.
Erasing
2.
on
the
Erasing
system.
should have
*:"<>letc.
?
appears.
Note:
follows:
within 8
ates
?
the
Press REPEAT to select
on
-
?
on
Repeat Programmed
32
?
track
PHOTO word
limited
?
a
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
MP3 / WMA disc
?
Select
again to exit the
will disappear.
mark
E
back, select
On
?
menu
mark will appear.
E
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
DISPLAY.
[ Song, Artist, Album, Comment,
MUSIC
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
PROGRAM Edit
Info
MP3/WMA files recorded
or
or
Press PROGRAM. The
then the
2-Music2
Track4
Audio CD
an
media. AUDIO CD
Press PROGRAM
Program
Track1
Track2
Insert
contain 30 tracks.
can
Note:
1/12
0:00:00
Track8
1.
2.
MUSIC
List
A program
starts. You
AUDIO CD
0:52:07
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the player memory.
Repeat step
Complete Program
During
STOP
the
mark will appear
E
1~3to
erase
additional
the list.
mode,
List
press PROGRAM and
Use vVbBto select "Clear
All", then press
ENTER.
Note:
The programs are also cleared when the power is off
the disc is removed.
or
31
Operation
Viewing
This unit
menu
JPEG files recorded media.
play
can
Insert
1.
JPEG file
a
Zoom
JPEG files recorded media. The PHOTO
a
on
appears
the TV
During watching pictures, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBv
video
screen.
PHOTO
V buttons.
Preview
List
Note:
Folder 00
Folder 01
When the resolution is set to
>>>
Folder 02
720p
or
1080i,
this function is not available.
Folder 03
Folder 04
01 FILE 01
To rotate
02 FILE 02
03 FILE 03
picture
Press v / V
/FILE 01
Press v / V to select
2.
a
folder, and press ENTER. A
list of files in the folder appears.
If you want to view
3.
v / V to
highlight
a
particular file, press
file and press ENTER
menu
while
PLAY.
or
watching pic-
Tips:
If you are in a file list and want to return to the
Folder list, use v / V buttons to highlight
previ-
Insert the disc
1.
Press TITLE to
Press v / V to select
4.
Use B to select
There
Use vVbBto
select the
you want to
>>
?
?
three Slide
Speed options
> (Slow).
Then,
highlight
are
(Normal)
On
and
.
option
use
: >>>
then press ENTER.
PHOTO word
menu
help
top of the
watching
picture,
menu
is
highlighted.
Notes:
viewing a JPEG file, the user guidance will not
displayed on the TV screen if the resolution is set to
720p or 1080i.
be
?
player
will
PAUSE/STEP
(Slide Show)
now
during
slide show.
?
go into PAUSE mode.
show, press PLAY
or
press
Card.
watching
with this
is limited
player
upon the size and number of JPEG
it could take a long time for this unit to read
Depending
large
---
reduce the resolution of the JPEG
pixels
The total number of files in
and burn another
a
folder should be less
?
Some discs may be incompatible due to
recording format or the condition of disc.
again.
?
or
>
or cursor
(b
or
B)
to advance to the next
once
or
while view-
previous
file.
?
a
different
Ensure that all the selected files have the
If the files have
rename
File
them
names
to be read
shown
32
compatibility
extensions when
to another File
picture
Memory
than 1190 files.
To return to the slide
a
1080i,
disc.
Press PAUSE/STEP
Press .
or
the desired music while
only
files to less than 5 million
then
?
ing
720p
follows:
be too
the
Still Picture
Moving
will continue until
the disc's contents. If you do not see an on-screen
display after several minutes, some of the files may
press ENTER.
2.
playback
program the desired tracks from the "MUSIC"
and then proceed as above.
files,
Slide Show
The
photo
icon then press ENTER.
picture,
as
When
1.
menu.
file.
pressed.
JPEG disc
highlight
PHOTO
press RETURN to hide the
menu.
Use vVbBto
types of file in
Tip:
To listen to
a
a
This function is not available for
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
the two
this function is not available.
b / B to
a
While
watching
When the resolution is set to
(Fast),
?
use
pic-
Notes:
to the next page.
?
?
display
starts. The
Playback
STOP is
move
containing
3.
press ENTER.
Press DISC MENU to
to rotate the
player.
2.
and
ous
?
picture
To listen to MP3 music while
the
tures, press STOP.
?
a
counter clockwise.
or
picture
a
To return to the PHOTO
4.
during showing
ture clockwise
as
copying
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
by
into the CD
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in Windows
are
Explorer.
Playing
this DVD
Using
1.
Insert
DivX Movie file
a
Player
you
can
play
DivX file.
DivX disc
DivX file recorded media. The MOVIE
a
appears
the TV
on
menu
as
compatibility
with this
player
is limited
follows:
screen.
?A vailable resolution size of the DivX file is under
MOVIE
720x576
0:00:00
(W
x
H) pixel.
List
?
Movie Folder 1
The file
name
of the DivX subtitle is available
Movie Folder 2
by
56 characters.
Movie Folder 3
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
If there is
Movie Folder 7
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 8
"
"
_
display.
2.
Press v / V to select
a
folder, and press ENTER. A
?
list of files in the folder appears.
3.
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
You
can use
variable
playback
Press STOP to
stop the playback. The Movie
menu
If you are in a file list and want to return to the previFolder list, use the v / V buttons on the remote
MPEG4 standard. Some MPEG4
?
On
?
?
CD with
menu
is
highlighted.
picture may not displayed properly while DivX
playback. Set your TV system to AUTO or PAL-60
mode to restore the picture, if available.
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
If the Disc Subtitle
DivX subtitle
title may not
setup
menu
a
does not have the
language you are going
be displayed properly.
to
play,
Playable
the sub-
called
1-point, 2-point,
or
encoding,
3-point GMC.
DivX file
.avi, .mpg, .mpeg
Playable
The
different levels of GMC
are
usually
encoders, like
Xvid, have this option.
or
There
to the next page.
switch
of the
?
move
MP3/WMA, JPEG and MOVIE file, you
MUSIC, PHOTO and MOVIE menu. Press
TITLE and MUSIC, PHOTO and MOVIE word on top
a
can
DivX
and press ENTER.
Press DISC MENU to
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
ous
highlight
audio is out-
If the file is recorded with GMC, the unit supports only 1-point of the record level.
*
Tips:
to
or
putted.
appears
?
30
If the video and audio structure of recorded file
is not interleaved, either video
functions. Refer to
?
?
over
normally.
?
page 29-30.
4.
If the number of the screen frame is
per 1 second, this unit may not operate
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Playable
Codec format
"DIVX3.xx
Notice for
displaying
If the subtitle does not
the DivX subtitle
display properly during playback,
press and hold SUBTITLE about 3 seconds then press
b / B to select another language code until the subtitle
is
"MP43
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Playable
Audio format
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
Not all the WMA Audio format is compatible with
?
displayed properly.
-
-
Note:
?
When the bitrate of video
memory card is
still image.
a
over
signal on a DivX file stored in
2Mbps, it can be displayed like a
-
-
?
this unit.
33
Operation
Playing
This unit will
a
play
DVD VR format Disc
DVD-R/RW discs recorded
DVD-Video format that have been finalized
using
using a
the
DVD-recorder.
?
This unit will
Video
1.
Insert
play DVD-RW discs
Recording (VR) format.
disc and close the
a
appears
on
the TV
recorded
using
tray. The DVD-VR
the
menu
screen.
DVD-VR
2.
Press v / V to select
ENTER and
3.
a
playback
Press DISC MENU to
track then press PLAY
or
starts.
move
to the list
menu.
Note:
?
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
Some DVD-VR disc
DVD RECORDER.
are
made with CPRM data
Player
does not
by
support these
kinds of discs.
What is 'CPRM'?
CPRM is a copy protection system (with scramble
system) only allowing the recording of 'copy once'
broadcast programs. CPRM stands for Content
Protection for Recordable Media. This player is
CPRM compatible, which means that you can record
copy-once broadcast programs, but you cannot then
make a copy of those recordings. CPRM recordings
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
can only be played on
specifically compatible with CPRM.
Additional
Controlling
Operation
other TVs with the
Maintenance and Service
remote control
Refer to the information in this
You
can
control the sound
You
can
control the sound
source, and
supplied remote
level, input
power switch of your LG TV with the
control.
level, input
source, and
power switch of non-LG TVs as well.
If your TV is listed in the table below, set the
appropri-
ate manufacturer code.
1.
While
holding down TV POWER button, press the
number buttons to select the manufacturer code for
your TV
(see
the table
below).
contacting
When
save
at the
more
them
than
at
one
one
code number is
one
Operation
packing
the exterior surfaces clean
Keeping
?
listed, try entering
time until you find the
a
carton and
original shipping
factory.
Do not
near
If
the
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Release TV POWER button.
Code numbers of controllable TVs
before
the unit
shipping
Please
chapter
service technician.
the Unit
Handling
?
2.
a
that works with
use
volatile
liquids
such
as
insecticide spray
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
your TV.
Cleaning
Manufacturer
Code Number
LG / GoldStar
1
(Default),
the unit
To clean the
player, use a soft, dry cloth. If the surfaces
extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
2
are
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Do not
use
Hitachi
4
thinner,
as
Note:
?
strong solvents such
these
Maintaining
Depending
function
on
your TV, some
the TV, even after
on
all buttons may not
entering the correct
might damage
the Unit
The DVD+VCR is
a
high-tech, precision
lens and disc drive
optical pick-up
picture quality
worn, the
If you enter a new code number, the code number
entered will be erased.
previously
?
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
again.
setting.
Set the
alcohol, benzine,
or
manufacturer code.
?
as
appropriate
code number
parts
device. If the
are
dirty
or
could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
or
the surface of the unit.
use.
contact your nearest authorized
Language
and Area Code List
Language Code
Use this list to
input
List
your desired
language
for the
following
initial
settings:
Disc
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Code List
Choose
a area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert
The TV is not set to receive this unit's
Select the
signal output.
on
a
cord into the wall outlet
disc.
not work.
No
picture.
appropriate video input mode
the picture from the this
the TV
so
unit appears
on
the TV
screen.
The video cable is not connected
Connect the video cable into the
securely.
securely.
Unit
output setting and TV resolution
capabilites
mismatch.
Check TV
jacks
capability.
Check mode of connections
(eg. S-Video, Components etc.).
Check unit Resolution
to TV
capability
setting according
and mode of
connection.
The
No sound.
equipment
connected with the
Select the correct
audio cable is not set to receive DVD
signal output.
The audio cables
The
picture
is poor.
player does
playback.
are
not connected
input mode of the
you can listen to the
sound from the this unit.
audio receiver
Connect the audio cable into the
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn
The DVD
The Audio
not start
position.
option
is set to the wrong
on
the
The disc is
An
unplayable
The disc is
connected with
Set the Audio
option
tion, then
on
turn
to the correct
the DVD
posiplayer again
POWER.
Clean the disc.
dirty.
The TV channels
equipment
jacks
the audio cable.
by pressing
.
so
are
not tuned in
properly.
disc is inserted.
placed upside
Check
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
down.
the disc
a
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
Cancel the
The remote control
There is
does not work
remote control and this unit.
an
the disc
tray correctly
Clean the disc.
the
properly.
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
Rating
function
or
change
level.
rating
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
No NICAM sound
recording
NICAM mode is not set
properly.
Make
on
sure
by repeatedly pressing
the remote control.
NICAM in the
menu
is set to
AUTO for the station to be recorded.
Refrnce
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
(approx.)
200-240V, 50/60 Hz
430x78.5x265mm(WxHxD)
4.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display type
RF Modulator
UHF 22
68
-
(41˚F
to
95˚F)
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
heads, helical scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
output
4-pin
x
x
1
1
75 ohms
Vp-p,
Audio
output (coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
3 V
Audio
output (analog audio)
2.0 Vrms
(p-p),
75 Ω,
Optical
(1 KHz,
0
dB),
connector
x
1
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
RGB
0.7
output
Design
and
specifications
are
subject
to
Vp-p,
change
75
1 kohms
(SCART)
ohms, unbalanced (SCART)
75 ohms
without notice.
P/NO: 3834RV0046M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement