LG CD-372AX Owner's manual

LG CD-372AX Owner's manual
ALMATY_CD-371.372.376.377(ENG)-69V
CD CASSETTE RECORDER
OWNER'S MANUAL
MODEL: CD-371A/AX/S
CD-372A/AX/S
CD-376A/AX/S
CD-377A/AX/S
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
and
specifications are subject
improvement.
without notice for
to
change
Precautions
CAUTION
Use of controls
CAUTION
procedures
RISK OF ELECTRIC
or
adjustments or performance of
specified herein may
other than those
result in
hazardous radiation exposure.
SHOCK DO NOT OPEN
Laser
is
tion
component in this product
exceeding the limit for Class
1.
capable
of
radia-
emitting
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
COVER(OR BACK)
NO
CAUTION:INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM.
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
VARNING:OSYNLIG LASERSTRALNING NAR DENNA
DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand
Explanation Graphical Symbols:
The
an
lightning flash with
equilateral triangle
user
arrowhead
symbol,
within
dangerous
product's enclosure that may be
magnitude to constitute a risk of electric
within the
of sufficient
point
is intended to alert the
important operating
l'appareil
est
ouvert,
ne
pas
radiations invisibles du faisceau laser.
This label is located
shock to persons.
The exclamation
aux
is intended to alert the
to the presence of uninsulated
voltage
s'exposer
within
user
and
an
equilateral triangle
to the presence of
maintenance(servicing)
accompanying the
on
the interior.
CLASS 1
LASER
PRODUCT
KLASSE 1
LASER
PRODUKT
LUOKAN 1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
instructions in the literature
appliance.
This
Compact
product.
WARNING
TO REDUCE THE RISK OF FIRE OF ELECTRIC
shock, do
Refer
qualified personnel only.
The
servicing
to
shall not be
not open the
cabinet,
Do not install this
apparatus
exposed
dripping
splashing and that no objects filled with liquids,
shall
on
the
be
vases,
placed
apparatus.
is classified
CLASS 1 LASER
as a
the
on
exterior.
book
to
player
The CLASS 1 LASER PRODUCT label is located
SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To avoid electrical
Disc
equipment
in
a
confined space such
a
case or similar unit.
or
such
as
Table of Contents
INTRODUCTION
Precautions/TableofContents................2
BeforeUse................................3
SafetyPrecautions........................3
NotesonDiscs..........................3
NotesonTapes..........................3
UpPanel/FrontPanel.......................4
RearPanel/DisplayWindow..................5
RemoteControl............................5
OPERATION
TapeOperation............................7
BasicPlayback..........................7
ToPausePlay...........................7
ToStopPlay............................7
.7
ToPlayRewindorFastForward.
CDOperation..............................8
BasicPlaybackSetup.....................8
ToPausePlay...........................8
ToStopPlay............................8
ToSkipaTrack..........................8
.
.
.
.
.
.
.
.
.
.
.
.
ToSearchaTrack........................8
PowerSource.............................6
TheACPowerCordConnection..............6
.6
Adjustingthevoltage(OPTIONAL).
BatteryInstallation........................6
AudioAdjustment..........................6
Volume Adjustment, UBB/EQ Adjustment
6
RadioOperation...........................7
Presettingtheradiostations.................7
Listeningtotheradio......................7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ToRepeatPlay..........................8
ProgramPlaySetup.......................8
SettingtheCLOCK.........................9
SLEEPFunction...........................9
OtherFunction............................9
SettingtheTIMER.........................10
Recording...............................10
BasicRecording.........................10
CDSynchronizedRecording...............10
REFERENCE
Specifications............................11
2
Before Use
Precautions
Safety
shipping the unit
The
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
To
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the unit
Handling
When
Cleaning
the center out.
keep the surface clean
Do not
use
volatile
liquids,
such
as
the unit. Do not leave rubber
near
contact with the unit for
leave marks
Cleaning
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
on
a
soft, dry cloth. If the surfaces
soft cloth
use a
lightly
solution. Do not
benzine,
or
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
alcohol,
the surface
on
Notes
analog
on
Tapes
Preventing
record
records.
Removing the tab(s) of the cassette (with
driver) will prevent accidental erasure.
of the unit.
Notes
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for
the unit
To clean the cabinet
Use
Do not
a
small
screw-
Side A
Discs
Tab for side A
Handling
discs
Do not touch the
Hold the disc
get
on
by
playback side of the disc.
edges so that fingerprints
the
will not
Tab for side B
the surface.
Do not stick paper
or
tape
on
the disc.
To record
again,
cover
the hole of the tab with adhesive
tape.
Storing
After
discs
playing,
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct
as there may be
increase inside the car.
sunlight,
a
Adhesive tape.
considerable temperature
3
INTRODUC
Up
Panel/Front Panel
5
6
1
2
7
3
8
4
Front Panel
9
(CD-371A/AX/S, CD-376A/AX/S)
10
Front Panel
12
11
10
(CD-372A/AX/S, CD-377A/AX/S)
1.
CD DOOR
2.
VOLUME CONTROL
8.
/
(
)
buttons
?
PRESET
?
UBB button
/
(
)
buttons
3.
POWER button
?
CLOCK button
4.
CD FUNCTION buttons
?
TIMER button
?
SET/MEMORY/PROGRAM button
?
MODE/RIF button
?
CD PLAY/PAUSE
?
CD
(
SKIP/SEARCH(
)
9.
button
/
?
)
buttons
?
TUNING/TIME
?
CD STOP
(
TAPE FUNCTION buttons
(-/+) buttons
STOP) button
?
TAPE BACKWARD PLAY
DISPLAY WINDOW indicator
?
6.
REMOTE SENSOR
?
7.
FUNCTION SELECT buttons
CD button
?
TAPE button
?
TUNER/BAND button
(z) button
( ) button
TAPE PLAY
5.
?
RECORD
?
(CD-376A/AX/S,
REWIND (
)
button
)
-
model)
button
FAST FORWARD
?TAPESTOP(
(
CD-377A/AX/S
(
)
button
)/TAPEDOOROPEN(
)
button
?
TAPE PAUSE
(
)
button
10. LEFT/RIGHT SPEAKER
11. TAPE DOOR
12.
?
PLAY SIDE SWITCH
[DIR
]
:
CD-376A/AX/S, CD-377A/AX/S model
?
PLAY DIRECTION SWITCH
[
/
CD-376A/AX/S, CD-377A/AX/S model
4
]
:
Rear
Panel/Display Window
1
4
INTRODUC
2
5
3
6
10
7
11
8
12
9
13
1.
FM ANTENNA
2.
HEADPHONE SOCKET
(
):
3.5mm
8.
CD PLAY/PAUSE indicator
9.
CD REPEAT PLAY indicator
3.
BATTERY COMPARTMENT
10. TIMER ON/OFF indicator
4.
AC POWER INPUT SOCKET
11. STEREO indicator
5.
VOLTAGE SELECTOR
12. SLEEP indicator
6.
CD SYNCHRO RECORDING indicator
7.
MEMORY indicator
(OPTIONAL)
13.
EQUALIZER indicator
Remote Control
1. POWER button
5
1
6
2
7
8
3
4
9
2. PRESET
(
)
,
button
3. CD FUNCTION buttons
?
CD PLAY/PAUSE
?
CD STOP
?
CD SKIP/SEARCH
(x )
(B/X )
button
button
4. VOLUME CONTROL
(
.m / M>
(
,
)
)
button
buttons
5. SLEEP button
6. EQUALIZER
(EQ)
button
7. BAND button
8. PROG. button
9. CD REPEAT button
5
Power Source
The AC Power Cord Connection
1
2
Battery
Before
connecting the AC power cord, check
that the operating voltage of your unit is
identical with the voltage of your local power
supplied.
Connect
one
(supplied)
Press and open the
1
2
end of the AC power cord
to the AC IN socket located at the
Plug
cover.
battery
cover.
Remote Control
Note
the AC power cord from the wall outlet if you
do not to use for an extended period of time.
Unplug
Adjusting
the
connecting
Press and open the
1
2
3
voltage (OPTIONAL)
If your unit is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before
the
Replace
3
the other end into the wall outlet.
battery
Put eight "D" (R20) batteries and four "AA"
(R6) batteries into the compartment making
sure the
and
are correctly positioned.
backside of your unit.
3
Installation
UNIT
Put two "AAA"
battery
cover.
(R03) batteries into the
compartment.
the
Replace
battery
cover.
the AC power cord.
Note
?
To avoid
from
damage
for
?
an
When the batteries
with
?
Volume
weak, replace all the batteries
During
the AC power cord connect to the wall outlet,
are
not
worn
out.
Adjustment
Adjustment
Press VOLUME CONTROL
CONTROL
are
(Unit:
UBB / EQ
,Remote control:
(Unit:
,Remote control:
)
)
to increase the sound
level,
or
press the VOLUME
to decrease it.
Adjustment
UBB
Repeatedly press
-
UBB to select
The UBB indicator will
light
one
of two sound effect for
emphasizing
the bass sound.
up.
EQ
Repeatedly press
EQUALIZER
(EQ)
The EQ indicator will be shown in the
6
to select
display.
one
unit
new ones.
the batteries
Audio
possible battery leakage,
plan to use the
the batteries if you do not
extended period of time.
remove
of four sound effect
(FLAT, ROCK, CLASSIC, POP).
Radio
You
can
Operation
preset 30 stations for FM and AM. Before tuning, make
sure
that you have turned down the volume to the
minimum.
the radio stations
Presetting
1
2
Press TUNER/BAND
control)
(unit)
to the radio
Listening
BAND
or
(remote
to select radio function.
a station you want by pressing TUNING
(- / +) buttons.
Tuning in manually
Press TUNING (- / +) briefly and repeatedly.
Tuning in automatically
Press TUNING (- / +) for more than 1 seconds.
Scanning stops when the unit tunes in a stations.
Select
1
2
Follow
steps
1-2 as left side.
Adjust
the volume
OPERATION
by pressing VOLUME
( / ) buttons [unit] or VOLUME
) [remote control].
CONTROL
(
To turn off the radio
Press POWER to turn the unit off
or
select another
-
3
4
function mode
Press MEMORY.
A preset number will flash in the
display
window.
Press PRESET
( / ) [unit] or PRESET
) [remote control] to select the preset
(
If
?
Press MEMORY
FM stereo broadcast is
noisy
disappears in
display window., but the reception will improve.
Press MODE/RIF again to restore the stereo effect.
so
that "STEREO"
the
again.
The station is stored.
1
Repeat steps
(or 2)
Notes
to 6 to store other
Adjust
stations.
To delete all the memorized stations
Press and hold MEMORY
on
then press MEMORY
To recall
again,
the stations
are
clear
more
reception.
This antenna is built within the unit and rotate the unit
for better
the front
seconds, "DEL" appears in the
panel for about
display window and
the antenna to get
AM antenna
?
two
an
Press MODE/RIF
number you want.
5
6
(CD, TAPE).
For your reference
reception.
FM antenna
?
Pull the
deleted.
telescopic
antenna out and
and direction for better
presets
adjust
the
angle
reception.
Press PRESET (
/
) [unit] or PRESET (
)
[remote control] until the desired preset number appears
or press it repeatedly.
Tape Operation
Basic
1
2
To
Playback
Press TAPE button to select
"TAPE" appears in the display window.
Open the cassette door by pressing TAPE
DOOR OPEN
) button.
(
cassette and close the TAPE door.
3
Insert
4
Press TAPE PLAY
a
( ) [or TAPE BACKWARD
( ) (CD-376A/AX/S, CD-377A/AX/S
model)] button.
PLAY
To Pause
Play
Press TAPE PAUSE
button
To
tape function.
again
(
to pause. Press the
) button
play.
point
pressing
during playback, press TAPE
stop play.
PLAY
(
(
/
)
)
at the
you want.
AUTO STOP (CD-371A/AX/S,CD-372A/AX/S model)
plays only front side, the unit
stops automatically.
AUTO REVERSE (CD-376A/AX/S, CD-377A/AX/S model)
Both sides of
a
cassette
played and stops automatically
continuously.
are
at the end of the
tape
To
playback side
) during playback.
change
To select
?
to
Fast Forward
After auto stop deck
Stop Play
) button
or
REWIND/ FAST FORWARD
button
?
the
(
play
Set to the
-
(
Rewind
Press DIR
to resume
Press TAPE STOP
Play
After
direction
by pressing
PLAY DIRECTION SWITCH.
Both sides of
a
automatically
at the end of
Set to the
-
or
Both sides of
cassette
by pressing
a
cassette
are
played
and
stopped
tape.
PLAY DIRECTION SWITCH.
are
played continuously.
7
CD
Operation
Basic
Playback Setup
Program Play Setup
You
Press CD button to select CD function.
1
2
Press CD DOOR to open the disc
Load
3
a
disc with the
Close the disc
printed
facing
up and
compartment.
Press CD PLAY/PAUSE
4
side
compartment.
) button
(
to
begin
play.
The total track number will be shown in the
To Pause
display.
Play
Press CD PLAY/PAUSE
) button
(
to pause
during
playback.
When
track is
a
paused,
""
Press CD PLAY/PAUSE
(
will flash in the
display.
) button again
to resume
1
2
3
4
5
Press CD STOP
STOP
(
or
) button during play-
back.
?
Press PROGRAM
control)
on
(or
PROG.
on
on
the discs and
can
contain up
the remote
the stop mode.
Press CD SKIP/SEARCH
(
)
,
buttons to select the track.
Press PROGRAM
(or
PROG.
on
the remote
control).
Repeat
2~3.
Press CD PLAY/ PAUSE
Press PROGRAM
on
Stop Play
-
To
arrange the order of the tracks
(
).
To check program contents
play.
To
can
create your own program. The program
to 20 tracks.
PROG.
(or
on
the remote
control)
the stop mode.
The disc, track and program number will be
displayed.
To clear progr am contents
Skip
a
Press PROGRAM
Track
on
Press CD SKIP/SEARCH
) button
(
to go
(or
PROG.
on
the remote
the stop mode. And then press CLEAR
panel
or
CD
STOP(
)
on
on
control)
the front
the remote control.
to the next track.
?
When CD SKIP/SEARCH
pressed
once
(
midway through
a
) button is
track, the player
To add program contents
1.
pressed again, a track
button is pressed.
To Search
After
a
pressing
(
holding CD SKIP/SEARCH
) button during playback, press
(
) button at the point you want.
Repeat Play
play
one
track
repeatedly
Press REPEAT button
-
To
play
all tracks
again during playback.
display.
"REPEAT ALL" appears in the
To cancel
repeat play
Press REPEAT button
-
during playback.
display.
repeatedly
Press REPEAT button
-
once
"REPEAT 1" appears in the
Repeat
8
indicator
once more
disappears.
during playback.
(or
PROG.
on
the remote
control)
the program stop mode until "Tr a c k
Number" blinks.
each time the
Track
CD PLAY/PAUSE
To
skipped
and
,
To
is
Press PROGRAM
repeatedly
returns to the start of that track. When it is
on
2~5on above.
2.
Repeat
To
modify progra m
1.
Press the PROGRAM
2.
contents
(or PROG. on the remote
control) to display program number you want to modify.
Repeat 2~4on above.
the CLOCK
Setting
1
Press CLOCK.
(If
the clock is
CLOCK for
2.
Select
requires setting, press
more than 2 seconds.)
24 hour
a
TIME
pressing
cycle
(-/+).
(12HR)
3
or
12 hour
and hold
cycle by
(24HR)
or
Press SET to confirm the selected hour
cycle.
4
5
6.
7
8
Use TIME
(-/+)
to set the correct hours.
Press SET.
Use TIME
(-/+)
to set the correct minutes.
Press SET and the correct time is shown
the
on
display.
Press CLOCK at any time to
for about 3 seconds.
display
the time
SLEEP Function
When the
1
To
sleep
specify
timer is used, the power is
the time
delay
automatically
before the power is
turned off, press SLEEP.
In the
display window you can see "90 SLEEP" for
about 5 seconds. This means that the system
turns off
automatically
after 90 minutes.
Each time the button is
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
80...70... etc.
To check the
remaining
specified
time has
elapsed.
Note
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until 10 SLEEP appears, and then press
SLEEP
Select the desired time to turn off.
2
turned off after the
once
again
while 10 SLEEP is
displayed.
time until the power is
turned off.
While the
sleep function is active
briefly. The time remaining until it
played for about 5 seconds.
press SLEEP
turns off is dis-
Other Function
Auto Function Select
Headphone Socket
?
If you press CD PLAY/ PAUSE (
listen to the radio, CD playback will
?
If you press
CASSETTE
PRESET(
play, radio
,
)
or
) during
begin.
BAND during
function will work.
?
CD
?
or
Connect
a stereo headphone plug (
3.5mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
into the
when
9
OPERATION
Setting
the TIMER
?
This function is
?
Select your desired radio station
1
automatically
turned
on
and off at the time you want.
press CD and load
or
disc.
a
Set the minute to switch off
Press CLOCK to check the current time.
10 (-/+).
For your reference
2
Press TIMER to enter the timer
setting mode.
display window.
display window in turn.
the volume level
12 Adjust(-/+).
"TIMER ON" appears in the
"TUN-Cd" flashes in the
Set the hour to switch
on
Switch the system off.
14
on.
The selected function is
by pressing
on
Press SET to confirm the minute to switch
Set the hour to switch off
in the
or
switched
on
check the timer
Each time the TIMER button is
the timer set
'TIMER OFF' indicator appears
window.
automatically
and off at the time set.
TIME
9
"TIMER" appears in the display window and the
timer setting has been completed.
To cancel
Set the minute to switch
TIME
Press SET.
13
by pressing TIME (-/+).
Press SET to confirm the hour to switch
by pressing
TIME
Press SET when the desired function is
3 flashing.
4
5
6 (-/+).
7
8
Press SET.
11
If you don't set clock, timer function doesn't work.
by pressing TIME
on.
display
setting
you can select
also check the timer
pressed
can
status.
To activate
or check the timer, press the TIMER
that "TIMER" appears in the display window.
To cancel the TIMER, press the TIMER button so that
button
by pressing
cancel. You
or
so
"TIMER"
disappears
in the
display
window.
(-/+).
Note
Press SET to confirm the hour to switch off.
The unit
can
also set the clock function in power off
state.
Recording
Wind the tape to the
Basic
point recording
starts.
(Use only
normal
Recording
1
Select
2
Insert
3
Press RECORD
a
function
(TUNER
or
CD) you
want to
record.
a
blank
TAPE PLAY
(
tapes.)
3
4
tape.
Press RECORD
(
TAPE PLAY
button is
CD
TUNER
4
Start
CD
Synchronized Recording
playing your
or
(RADIO).
recording
Press TAPE PAUSE
button
To
automatically
records
an
entire CD into
a
) button.
pressed automatically.
synchronized recording is started
automatically after about 7 seconds.
again
to
(
resume
) button. Press
recording.
TAPE PAUSE
(
)
stop recording
Press TAPE STOP
This feature
)
The
To pause
) button.
) button is pressed automatically.
(
(
(Your cassette
the tape.)
(
)
deck will
button.
automatically stop
at the end of
cassette.
1
2
10
Follow
steps
1-2 as "Basic
Recording".
Notes
If you wish to record from the desired track, select the
Play
the CD disc and set to the CD pause
condition.
desired track with CD SKIP/SEARCH
)
button before
commencing
(
CD
,
recording.
Specifications
MODEL
SECTION
Power
SWAM (optinal)(MW
[TAPE]
Designs
panel
of the unit.
20W
(W
x
H
x
D)
500
191
x
x
317
mm
Output Power
Speakers
Battery Operation
Frequency response
Signal-to-noise ratio
4.5WX2
T.H.D
0.7 %
Tuning Range
Intermediate Frequency
10.7 MHz
Antenna
Telescopic
Tuning Range
Intermediate Frequency
522-1611kHzor530-1610kHz
3.2ΩX2
DC 12V,
100
eight "D"(R20)
batteries
59 dB
87.5 -108 MHz
450 kHz
Ferrite bar antenna
5800
Antenna
Telescopic
Recording System
Frequency Response
Signal to Noise Ratio
4 Tracks 2 channel stereo
are
-
18000 kHz
450 kHz
125
-
to
antenna
8000Hz
40/45dB
subject
65 -108 MHz
antenna
Tuning Range
Intermediate Frequency
specifications
(not supplied)
18000 Hz
-
Antenna
and
REF NC
2.75kg
External dimensions
FM
[Tuner]
Refer to the back
supply
consumption
Mass
[CD]
CD-371/372/376/377AX
CD-371/372/376/377S
Power
[Genral]
CD-371/372/376/377A
change
(REC/PLAY)
without notice.
11
P/NO
:
3828R-A069V
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement