LG DM5420 Owner's manual

LG DM5420 Owner's manual
ENGLISH
РУССКИЙ
ҚAЗAҚ ТІЛІ
O’ZBEK
OWNER’S MANUAL
DVD MINI Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
DM5420 (DM5420, DMS5420V)
DM5420-FT.AUZBLLK_5069-ENG.indd 1
2012-07-16
9:18:26
1
Getting Started
2
Getting Started
Safety Information
CAUTION
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
DM5420-FT.AUZBLLK_5069-ENG.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2012-07-16
9:18:27
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
DM5420-FT.AUZBLLK_5069-ENG.indd 3
2012-07-16
9:18:27
4
Getting Started
Copyrights
1
Getting Started
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent
copyrighted material without permission. This
product features the copy protection function
developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and
playing the pictures of these discs picture noise
will appear. This product incorporates copyright
protection technology that is protected by U.S.
patents and other intellectual property rights. Use
of this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p UNIT, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/ Live File System : Disc format system for
Windows Vista)
DM5420-FT.AUZBLLK_5069-ENG.indd 4
2012-07-16
9:18:27
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
7
Unique Features
7
– USB Direct Recording
7
– AUTO DJ
7Accessories
7Introduction
7
– Playable Discs
7
– About the & Symbol Display
8
– Symbol Used in this Manual
8
– Regional Codes
8
Playable file Requirement
8
– MP3/WMA music file requirement
8
– Compatible USB Devices
9
– USB device requirement
9
– Photo file requirement
9
– DivX file requirement
10 Remote control
11 Top panel
12 Front panel
14 Rear panel
2Connecting
15
15
15
16
16
17
17
17
18
18
18
19
19
20
20
21
22
Connecting to speakers
– Attaching the speakers to the unit
Antenna Connection
Connections to Your TV
– Video Connection
– Component Video Connection
Optional Equipment Connection
– AUX In Connection
– USB Connection
Adjust the Setup settings
– OSD Initial language settings Optional
– To display and exit the Setup Menu
– LANGUAGE
– DISPLAY
– AUDIO
– LOCK (Parental Control)
– OTHERS
DM5420-FT.AUZBLLK_5069-ENG.indd 5
5
3Operating
23
23
24
24
24
25
25
25
25
25
25
25
26
26
26
26
27
27
27
28
28
28
28
28
28
29
29
29
30
30
30
30
30
31
31
31
31
32
Basic Operations
– Disc/USB Operations
– Tape Operations
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– Selecting a subtitle language
– 1.5 times speed playback
– Starting play from selected
time
– Last Scene Memory
– Changing the character set to display
DivX® subtitle correctly - optional
– Programmed Playback
– Viewing a PHOTO file
– Viewing a PHOTO file as a slide show
– Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
– DEMO
– Turning off the sound temporarily
– Screen Saver
– System Select - Optional
– Displaying file information
(ID3 TAG)
– AUTO DJ playback
– Using Microphone
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Improving poor FM reception
Sound adjustment
– Setting the surround mode
– Setting the USER EQ
Advanced Operations
– Listening to music from your external
device
– Recording on USB
– Recording on tape
2012-07-16
1
2
3
4
5
9:18:27
6
Table of Contents
4Troubleshooting
33Troubleshooting
5Appendix
34 Area Codes
35 Language Codes
36Specifications
38Maintenance
38 – Handling the Unit
38 – Notes on Discs
38 Trademarks and Licenses
DM5420-FT.AUZBLLK_5069-ENG.indd 6
2012-07-16
9:18:27
Getting Started
Unique Features
Introduction
USB Direct Recording
Playable Discs
Records music to your USB device.
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
Blends the end of one song into the beginning of
another for seamless playback.
1
Accessories
DVD-VIDEO (8 cm / 12 cm disc)
Please check and identify the supplied accessories.
Discs such as movies that can be
purchased or rented.
Getting Started
AUTO DJ
7
DVD±R (8 cm / 12 cm disc)
Video mode and finalized only
DVD-RW (8 cm / 12 cm disc)
Video mode and finalized only
Video cable (1)
FM antenna (1)
DVD+R: Video mode only
Supports the double layer disc also
DVD+RW (8 cm / 12 cm disc)
Video mode and finalized only
0
Remote control (1)
Batteries (2)
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the & Symbol Display
“&” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that disc.
DM5420-FT.AUZBLLK_5069-ENG.indd 7
2012-07-16
9:18:28
8
Getting Started
Symbol Used in this Manual
DVD and finalized DVD±R/RW
1
r
Getting Started
DivX files
y
MP3/WMA files, Audio CDs
u
JPG files
i
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
•• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
•• If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
,,Note
Indicates special notes and operating features.
,,Tip
Playable file
Requirement
MP3/WMA music file
requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
•• Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
•• Bit rate : 32 - 320 kbps (MP3), 40 - 192 kbps
(WMA)
•• Maximum files : Under 999
•• File extensions : “.mp3”/ “.wma”
•• CD-ROM file format : ISO9660/ JOLIET
•• We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
Compatible USB Devices
•• MP3 Player : Flash type MP3 player.
Indicates tip and hints for making the task easier.
•• USB Flash Drive : D
evices that support USB2.0 or
USB1.1.
Indicates cautions for preventing possible damages
from abuse.
•• The USB function of this unit does not support
all USB devices.
>>Caution
DM5420-FT.AUZBLLK_5069-ENG.indd 8
2012-07-16
9:18:28
Getting Started
USB device requirement
DivX file requirement
•• Devices which require additional program
installation when you have connected it to a
computer, are not supported.
DivX file compatibility with this unit is limited as
follows :
1
•• Available resolution:
up to 800 x 600 (W x H) pixels.
•• For a large capacity USB, it may take longer than
a few minute to be searched.
•• The file name of the DivX subtitle should be
entered 45 characters or less.
•• To prevent data loss, back up all data.
•• If there is a code impossible to express in the
DivX file, it may be displayed as a “ _ “ mark on
the display.
•• Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
•• This unit is not supported when the total
number of files is 1 000 or more.
•• External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
•• USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
•• Frame rate : less than 30 fps.
•• If the video and audio structure of recorded
files are not interleaved, either video or audio is
output.
•• Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
•• Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
Photo file requirement
•• Playable Codec format : “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “MP4V3”, “3IVX”.
Photo file compatibility with this unit is limited as
follows :
•• Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
•• Max pixel in width :
Normal : 5120 x 3840
Progressive JPEG : 2048 x 1536
•• Maximum files : Under 999
•• Some discs may not operate due to a different
recording format or the condition of disc.
•• File extensions : “.jpg”
•• CD-ROM file format : ISO9660 LEVEL 1/ JOLIET
Getting Started
•• Do not extract the USB device while in operation.
•• If you use a USB extension cable or USB hub, the
USB device is not recognized.
9
•• Sampling frequency : between 32 to 48 kHz
(MP3), between 32 to 48 kHz (WMA)
•• Bit rate : between 32 to 320 kbps (MP3), 40 to
192 kbps (WMA)
•• For Discs formatted in Live file system, you can
not use it on this unit.
•• If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
•• If you play a DivX file differ from DivX spec, it
may not operate normally.
DM5420-FT.AUZBLLK_5069-ENG.indd 9
2012-07-16
9:18:28
10
Getting Started
Remote
control
1
Getting Started
• • • • • • a • • • • • •
REPEAT : Selects a play mode.
1(POWER) : Switches the unit
ON or OFF.
VOL(+/-) (Volume) : Adjusts
volume level.
B(OPEN/CLOSE) : Opens and
closes the disc tray.
SOUND EFFECT9 : Selects a
sound effect mode.
FUNCTION : Selects the
function and input source.
[email protected]: Mutes the sound.
D.SKIP : Chooses a desired disc.
CLEAR :
- Removes a number when
TITLE : If the current DVD
title has a menu, the title
menu appears on the screen.
Otherwise, the disc menu may
not appear.
setting the password.
- Removes a track number on
the Program List.
- Removes language code when
setting the disc language.
SETUP : Accesses or removes
setup menu.
• • • • • • d • • • • • •
• • • • • • b • • • • • •
DISPLAY : Accesses On-Screen
Display.
0
MENU : Accesses the menu on a
DVD disc.
PRESET(w/s) : Selects
programme of Radio.
TUNING(-/+) : Tunes in the
desired radio station.
w/s/a/d : (up/down/left/
right) : Uses to navigate onscreen displays.
ENTERb : Acknowledges menu
selection.
BACKx : Moves backwards in
the menu.
Battery Installation
RECX : Starts recording.
• • • • • • c • • • • • •
Z(STOP) : Stops playback or
recording.
Remove the battery cover
on the rear of the remote
control, and insert two (size
AAA) batteries with 4 and 5
matched correctly.
DM5420-FT.AUZBLLK_5069-ENG.indd 10
0 to 9 numerical buttons :
Selects numbered options in a
menu.
S-TITLE : During playback, press
S-TITLE repeatedly to select a
desired subtitle language.
PROG./MEMO. :
-Stores radio stations.
-Creates a playlist you want to
listen to.
TV Control buttons : Controls
the TV. (LG TV only)
Controlling the TV.
You can control the sound
level, input source, and power
switching of LG TVs as well.
Hold 1(POWER)(TV) and
press PR/CH(w/s) button
repeatedly until the TV turns
on or off.
SLEEP : Sets the system to turn
off automatically at a specified
time.
MONO/STEREOz :
- Starts playback.
-Selects Mono/Stereo.
?: This button is not available.
M(PAUSE) :
- Pauses playback.
- Plays title Frame-by-Frame.
(DVD,DivX only)
ECHO VOL (+/ -) : Adjusts echo
volume.
C/V(SKIP) : Goes to next
or previous chapter/track/file.
c/v(SCAN) : Searches
backward or forward.
MIC VOL(+/-) : Adjusts
microphone volume.
AUTO DJ : Selects the AUTO DJ
mode.
VOCAL FADER : enjoys the
function as karaoke, by reducing
singer vocal of music in the
various sources.
2012-07-16
9:18:29
Getting Started
11
Top panel
1
Getting Started
a X(RECORD)
Starts recording.
b D(PLAY)
Starts playback.
c
(REW)
Searches backward.
d
(FF)
Searches forward.
e IR(STOP/OPEN)
During playback, Stops play.
In stop state, opens or closes the cassette tape
door.
f M(PAUSE)
Pauses playback.
DM5420-FT.AUZBLLK_5069-ENG.indd 11
2012-07-16
9:18:29
12
Getting Started
Front panel
1
Getting Started
1/!
AUX
PR
ESE
T-
EQ
DM5420-FT.AUZBLLK_5069-ENG.indd 12
2012-07-16
9:18:29
Getting Started
a MIC 1,2
Connects a microphone to this jack.
m STOP
Stops playback or recording.
nTAPE/DEMO
Demonstrates each of functions.
Selects the TAPE function.
b DISC SKIP
Chooses a desired Disc.
c AUTO DJ
Selects the AUTO DJ mode.
d USER EQ
Controls sound register.
e LG EQ
Selects a Natural or Local Specialization
equalizer effect by LG EQ.
fEQ
Chooses sound impressions.
g SET/CD M
Pauses or confirms the setting.
Pauses playback.
hDisplay window
i1/!(POWER)
j Remote sensor
kCLOCK
Sets the clock and checks the time.
TIMER
Uses your player as an alarm clock.
1
o ST./MONO
Selects Stereo/Mono.
p BASS BLAST/MP3 OPT.
- Reinforces the treble, bass and surround effect.
- Optimizes compressible MP3 file to improve the treble sound.
q D(PLAY)
Starts playback.
Getting Started
< Headphone jack
A warning that excessive sound pressure from
earphones and headphones can cause hearing
loss.
13
PRESET(-/+)
Selects preset numbers.
TUNING(-/+)
Selects the radio station
Y/U
- Searches backward or forward.
- Skips to the previous/next chapter/track/file.
rR (RECORD)
Starts recording.
sOPEN/CLOSE
Opens and closes the disc tray.
tUSB port
Plays or records the audio files by connecting
the USB device.
l USB
Selects the USB function.
uVolume knob
Adjusts volume of speaker or headphone.
DVD/CD
Selects the DVD/CD function.
vDisc tray
Roads a disc(discs).
TUNER
Selects the TUNER function.
AUX
Selects the AUX function.
DM5420-FT.AUZBLLK_5069-ENG.indd 13
2012-07-16
9:18:29
14
Getting Started
Rear panel
1
Getting Started
FM
Y
PB
a SPEAKERS terminal
b Power cord
c VIDEO OUT connector
d ANTENNA (FM)
e COMPONENT VIDEO OUT (PROGRESSIVE SCAN) connectors
f AUX IN connectors (L/R)
DM5420-FT.AUZBLLK_5069-ENG.indd 14
2012-07-16
9:18:30
Connecting
Connecting to
speakers
15
Antenna Connection
Connect the supplied FM antenna for listening to
the radio.
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
2
Connecting
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
FM
FM
Y
PB
>>Caution
• Be careful to make sure children do not put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hall for plentiful bass
sound on speaker cabinet (enclosure)
• The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
Color
Speaker
Position
Red
Front
Front right
White
Front
Front left
DM5420-FT.AUZBLLK_5069-ENG.indd 15
,,Note
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
2012-07-16
9:18:30
16
Connecting
Connections to Your
TV
Video Connection
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV by using a video cable.
Make one of the following connections, depending
on the capabilities of your existing equipment.
,,Note
2
Connecting
•• Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
FM
Y
PB
•• Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
•• Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
•• Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
DM5420-FT.AUZBLLK_5069-ENG.indd 16
Yellow
2012-07-16
9:18:30
Connecting
Component Video Connection
Connect the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV by using
component cables.
You can hear the sound through the system’s
speakers.
17
Optional Equipment
Connection
AUX In Connection
Connect an Output of auxiliary device to the AUX
(L/R) IN Connector.
2
Connecting
Y
PB
Y
PB
Red
White
To the audio output jacks
of your component
(TV, VCR, etc.)
,,Note
Green
Blue
Red
If your TV has only one output for audio
(mono), connect it to the left (white) audio jack
on the unit.
,,Note
If your TV accepts progressive format signals,
you must use this connection and set
[Progressive Scan] in [Display] setup to [On]
(See page 20).
DM5420-FT.AUZBLLK_5069-ENG.indd 17
2012-07-16
9:18:30
Connecting
18
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and
the Setup menu among other things. refer to the
contents as following.
1/!
ESET
-
EQ
PR
2
Adjust the Setup
settings
Connecting
OSD Initial language settings
- Optional
When using this unit for the first time, the initial
language Setup menu appears on your TV screen.
You must complete initial language selection
before using the unit. English will be selected as the
initial language.
,,Note
Removing the USB Device from the unit.
1. Choose a different function/mode or
press Z(STOP) on the remote control or
STOP on the unit twice in a row.
2. Remove the USB device from the unit.
1.Press 1(POWER) on the remote control or
1/!(POWER) on the unit to turn the unit on.
The language setup menu will appear on the
screen.
2.Use w/s/a/d on the remote control to
select a language then press ENTERb.
The confirm menu will appear.
3.Use a/d to select [Enter] then press ENTER
b to finish the language setup.
DM5420-FT.AUZBLLK_5069-ENG.indd 18
2012-07-16
9:18:31
Connecting
To display and exit the Setup
Menu
1. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or by
pressing DVD/CD or USB on the unit.
19
LANGUAGE
OSD
Select a language for the Setup menu and then on
screen display.
2.Press SETUP on the remote control.
Displays the [SETUP] Menu.
Disc Audio/Disc Subtitle/Disc Menu
3.Press SETUP or BACKx to exit in the [SETUP]
Menu.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Menu
Buttons
w/s
Move
w/s
Moving to another
menu.
a
Prev.
a
Moving to previous
level.
d
Select
d
Moving to next level
or selecting menu.
x
Close
b
Enter
Operation
BACKx
To exit the [Setup]
menu.
ENTER b
To confirm menu.
DM5420-FT.AUZBLLK_5069-ENG.indd 19
Refer to the original language in which the disc
was recorded.
2
Connecting
About help menu for Setup
[Other]
To select another language, press numeric
buttons and then ENTER b on the romote
control to enter the corresponding 4-digit
number according to the language code list
on the page 35. If you enter the wrong language
code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
2012-07-16
9:18:31
20 Connecting
DISPLAY
AUDIO
TV Aspect
DRC (Dynamic Range Control)
Select which screen aspect to use is based on the
shape of your TV screen.
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
[4:3]
Select when a standard 4:3 TV is connected.
2
[16:9]
Connecting
Select when a 16:9 wide TV is connected.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks output progressive
signal. If your TV accepts progressive format signals,
you will enjoy accurate color reproduction and high
quality image by selecting [On]. If your TV does not
accept progressive format signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold Z(STOP) for about five
seconds. The video output will be restored to the
standard setting, and a picture will be visible on
your TV.
DM5420-FT.AUZBLLK_5069-ENG.indd 20
2012-07-16
9:18:31
Connecting
LOCK (Parental Control)
21
Password
You can enter or change password.
Initial Setting of the Area Code
When you use this unit for the first time, you have
to set the Area Code as shown below.
1.Press SETUP on the remote control.
2. Select the [Lock] menu and then press d.
4. Select the first character by using w/s buttons.
5.Press d and select the second character by
using w/s buttons.
6.Press ENTERb to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
d.
2. Input a password and press ENTERb.
To change the password, press ENTERb when
the [Change] option is highlighted. Input a
password and press ENTERb. Enter it again
and press ENTERb to verify.
3.Press SETUP to exit the menu.
,,Note
If you forget your password, you can clear it by
using the following steps:
1.Press SETUP to display the Setup menu.
2.Input the 6-digit number “210499” and press
ENTERb. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 34.
2. Input a password and press ENTERb.
1. Select [Area Code] on the [Lock] menu then
press d.
3. Select a rating from 1 to 8 by using the w/s
buttons.
2. Input a password and press ENTERb.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
2
Connecting
3.Press d. To access the [Lock] options, you must
input the password you have created. Input a
password and press ENTERb. Enter it again
and press ENTERb to verify. If you make a
mistake before pressing ENTERb, press CLEAR.
1.Select [Password] on the [Lock] menu and then
press d.
3. Select the first character by using w/s buttons.
4.Press d and select the second character by
using w/s buttons.
5.Press ENTERb to confirm your Area code
selection.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4.Press ENTERb to confirm your rating
selection.
DM5420-FT.AUZBLLK_5069-ENG.indd 21
2012-07-16
9:18:31
22 Connecting
OTHERS
DivX(R) Registration
2
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
Connecting
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
,,Note
All the downloaded videos from DivX(R) VOD
with this unit’s registration code can be played
on this unit.
DM5420-FT.AUZBLLK_5069-ENG.indd 22
2012-07-16
9:18:31
3Operating
Operating 23
Basic Operations
To
Do this
Stop
Press Z(STOP) on the remote
control or STOP on the unit.
Playback
Press MONO/STEREOz
on the remote control or D
(PLAY) on the unit.
Disc/USB Operations
1. Insert the disc by pressing B(OPEN/CLOSE)
on the remote control or by pressing OPEN/
CLOSE on the unit.
Connect the USB device to the USB port.
2. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or by
pressing DVD/CD or USB on the unit.
3. Select a file (or track/ title) you want to play by
pressing w/s/a/d on the remote control
or Y/U on the unit.
Pause
Press M(PAUSE) on the remote
control or SET/CD M on the
Frame-by-Frame
unit repeatedly to play title
playback
Frame-by-Frame.
(DVD, DivX only)
•• For the most Audio CD and DVD-ROM discs,
playback starts automatically.
Skipping to the
next/previous
chapter/ track/
file
•• The unit plays only music file contained in
the USB storage device or disc automatically.
(except for folder)
During playback, press V
on the remote control or U
on the unit to go to the next
chapter/ track/ file.
After playback, press C on
the remote control or Y
on the unit within 3 seconds
to step back to the previous
chapter /track /file.
And press C on the remote
control or Y on the unit
after 3 seconds to return to
the beginning of the current
chapter /track /file.
3
Operating
,,Note
•• When playing a disc or USB Flash Drive
containing with DivX, MP3/ WMA and JPEG
files together, you can select menu of files
which you would like to play by pressing
MENU on the remote control.
During playback, press M
(PAUSE) on the remote control
or SET/CD M on the unit.
During playback, press and
hold c/v on the remote
Locating a
control repeatedly or Y/
point quickly by U on the unit to select the
playing a file in required scan speed.
fast forward or
To return to normal speed,
fast reverse
press MONO/STEREOz on
the remote control..
DM5420-FT.AUZBLLK_5069-ENG.indd 23
Slowing down
the playing
speed
In the pause mode, press
c/v on the remote
control to select the required
speed. (DVD only)
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly, and the
current title/chapter/track/file
will be played back repeatedly
or randomly.
- Random play mode : only
music files.
2012-07-16
9:18:31
24 Operating
,,Note
The display window will be changed in the
following order.
yy USB : REPEAT / REPEAT ALL / RANDOM / OFF
yy MP3/WMA CD : REPEAT / REPEAT ALL / RANDOM / OFF
yy Audio CD : REPEAT / REPEAT ALL / RANDOM
/ OFF
3
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
Tape Operations
1.Press DISPLAY on the remote control to show
various playback information.
The displayed items differ depending on the
disc type or playing state.
1.Press FUNCTION on the remote control or
TAPE/DEMO on the unit to select tape function.
2. You can select an item by pressing w/s and
change or select the setting by pressing a/d.
Operating
2. Open a cassette tape door by pushing
IR(STOP/OPEN) .
Title
3. Load a cassette tape with the side you want to
play facing forward.
-- Current title number/total number
of titles.
Chapter
-- Current chapter number/total
number of chapters.
Time
-- Elapsed playing time
To
Do this
Stop
Press IR(STOP/OPEN) on
the top panel.
Play
Press D(PLAY) on the top
panel to start playback.
Audio
-- Selected audio language or
channel.
During playback, press
M(PAUSE) on the top panel.
Press M(PAUSE) to resume
playback.
Subtitle
-- Selected subtitle.
Angle
-- Selected angle/total number of
angles.
Press
Sound
-- Selected sound mode
Pause
Fast-forward or
rewind
/
(REW/FF) .
Recording on USB
You can record sounds of tape on USB.
Selected total time of current title/
file.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.
1. Connect the USB device to the unit.
2.Press FUNCTION on the remote control or
TAPE/DEMO to select the tape function.
3. Load a cassette tape with the side you want to
record facing forward.
4.Press D(PLAY) on the top panel. Then “checking”
will be displayed in the display window.
5. RECX on the remote control or R on the unit
to start recording.
6. To stop recording, Press Z(STOP) on the remote
control or STOP on the unit.
7. If you want to record the sounds of tape, start
recording during playback.
DM5420-FT.AUZBLLK_5069-ENG.indd 24
2012-07-16
9:18:31
Operating 25
To display the DVD Menu
r
When you play a DVD which contains several
menus, you can select the menu you want by using
MENU.
1.Press MENU on the remote control.
The disc’s menu appears.
2. Select the menu by using w/s/a/d.
3.Press ENTERb to confirm.
To display the DVD title
r
1.Press TITLE on the remote control.
The disc’s title appears.
2. Select the menu by pressing w/s/a/d.
3.Press ENTERb to confirm.
Selecting a subtitle language
yr
During playback, press S-TITLE on the remote
control repeatedly to select a desired subtitle
language.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures
and to listen to the sound quicker than to play at a
normal speed.
1. During playback, press MONO/STEREOz on
the remote control or D(PLAY) on the unit to
play at 1.5 times speed. “dX1.5” will appear on
the screen.
2.Press MONO/STEREOz on the remote
control or D(PLAY) on the unit again to exit.
y
To start playing at any chosen time on the file or
title,
1.Press DISPLAY on the remote control during
playback.
2.Press w/s to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4.Press ENTERb to confirm. Playback starts from
the selected time.
3
Operating
When you play a DVD which contains several titles,
you can select the title you want by using the
TITLE.
Starting play from selected
time
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Changing the character set to
display DivX® subtitle correctly
- optional
y
During playback, if the subtitle does not displayed
on the screen properly, press and hold S-TITLE on
the remote control for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly.
,,Note
If any button is not pressed for about
10 seconds, the language code display
disappears.
DM5420-FT.AUZBLLK_5069-ENG.indd 25
2012-07-16
9:18:32
26 Operating
Programmed Playback
u
You can play the contents of a disc in the order
you want by arranging the order of the songs on
the disc. The program is cleared when the disc is
removed.
1. Select a desired music file then press
PROG./MEMO. on the remote control or select
"#” and then press ENTERb to add the
music file to the program list.
2. To add all music file on the disc, select “^“
and then press ENTERb.
3
3. Select a music file from the program list then
press ENTERb to start programmed playback.
Viewing a PHOTO file as a
slide show
i
1. Highlight the file (not folder) which you like
beginning slide show.
2.Use w/s/a/d on the remote control to
highlight d . Then, use a/d to select the (3s/
5s/ 8s) option you want to use and then press
ENTERb.
3.Use w/s/a/d to highlight
ENTERb.
Menu
Operating
x
Close
i
b
This unit can play discs with photo files.
3. If you want to view a particular file, press
w/s on the remote control or Y/U on
the unit to highlight a file and press ENTERb
on the remote control or D(PLAY) on the unit.
While viewing a file, you can press Z(STOP)
on the remote control or STOP on the unit to
move to the previous menu (JPEG menu).
Buttons
a/d
Prev./ Next
Viewing a PHOTO file
2.Press w/s on the remote control or Y/U
on the unit to select a folder, and then press
ENTERb on the remote control. A list of files in
the folder appears.
If you are in a file list and want to return to the
previous folder list, use w/s on the remote
control or Y/U on the unit to highlight
g... and press ENTERb on the remote control
or D(PLAY) on the unit.
then press
About help menu for slide show.
4. To clear a music file from the program list, select
the music you want to clear then press CLEAR
or select “-“ icon and then press ENTERb.
To clear all music file from the program list,
select “=“ then press ENTERb.
1. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or by
pressing DVD/CD or USB on the unit.
d
Hide
Operation
w/s
Rotating the
picture.
a/d
Moving to
another file.
BACKx
ENTERb
Returning to the
menu.
Hiding the help
menu.
Setting the Clock
1. Turn the power on.
2.Press CLOCK on the unit if you set the clock
function for the first time.
Press and hold CLOCK on the unit for at least
2 seconds if you have set the clock function
before.
3. Choose from either, by using Y/U.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET/CD M for confirm your selection.
5. Select the hours by using Y/U.
6.Press SET/CD M.
7. Select the minutes by using Y/U.
8.Press SET/CD M.
9. If you want to reset the clock, repreat steps 2-8.
10. If you want to stop while setting the clock ,
press CLOCK.
DM5420-FT.AUZBLLK_5069-ENG.indd 26
2012-07-16
9:18:35
Operating 27
Using your player as an alarm
clock
1. Turn the power on.
2.Press TIMER on the unit to set the alarm
function.
3. Alarm sound sources blink. While each of sound
sources blink, select the one you want by
pressing SET/CD M.
4. “ON TIME” setting is displayed.
The hour setting blinks. Press Y/U to
select the hour and then press SET/CD M to
save.
5. The minute setting blinks. Press Y/U to
select the minute and then press SET/CD M to
save.
7. The minute setting blinks.
Press Y/U to select the minute and then
press SET/CD M to save.
8. The volume settings blinks.
Press Y/U to change the volume and then
press SET/CD M to save.
•• If you set the clock time and alarm, you
can check the time and alarm icon “(“ by
pressing CLOCK although the unit is turned
off.
•• During playback, Press TIMER two times
when the alarm icon “(“ is displayed. You
can check the setting state.
•• If you activate the alarm, the alarm icon “(“
will appear in the display window.
•• If you deactivate the alarm, the alarm icon
“(“ will disappear in the display window.
•• Alarm function only works when the unit is
turned off.
•• If the time you set is up, the unit will be
turned on automatically.
•• If you select DVD/CD mode for alarm sound
source with a DVD/DivX CD on the disc
tray, the alarm sound source is switched to
TUNER mode automatically.
3
Operating
6. “OFF TIME” setting is displayed.
The hour setting blinks. Press Y/U to
select the hour and then press SET/CD M to
save.
,,Note
•• After setting a clock function, you can set
alarm function.
•• If you select USB mode for alarm sound
source with multi-device USB, the alarm
sound source is switched to TUNER mode
automatically.
9. You can check the setting state.
10.If you want to reset the alarm, repeat steps 2-8.
Dimmer
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn off. (You can see
the following order, 180->150-> 120 -> 90 -> 80 ->
70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10)
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
,,Note
•• You can check the remaining time before
the unit turns off.
•• Press SLEEP. The remaining time appears in
the display window.
•• Sleep function will work after dimmer
function.
DM5420-FT.AUZBLLK_5069-ENG.indd 27
2012-07-16
9:18:36
28 Operating
DEMO
AUTO DJ playback
In power off state, press TAPE/DEMO on the unit
once. The unit will power on and display the each
of functions in the display window.
u
Turning off the sound
temporarily
Press [email protected] on the remote control to mute
your sound.
You can mute your sound in order, for example, to
answer the telephone. And “q” will appear in the
display window.
3
To cancel MUTE function, press [email protected] or
adjust volume level by pressing VOL(+/-).
Operating
Screen Saver
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings order,
(AUTO DJ RANDOM) ->(AUTO DJ SEQUENTIAL) ->
(AUTO DJ OFF).
Mode
Display Window
Description
OFF
(AUTO DJ OFF)
-
RANDOM
(AUTO DJ
RANDOM)
The music
is played
randomly on
this mode.
REPEAT
(AUTO DJ
SEQUENTIAL)
The music
is played
repeatedly on
this mode.
The screen saver appears when you leave the unit
in stop mode for about five minutes.
System Select - Optional
You must select the appropriate system mode for
your TV system. If “NO DISC” appears in the display
window, press and hold M(PAUSE) on the remote
control or SET/CD M on the unit for more than
five seconds to be able to select a system. (AUTO/
PAL/NTSC)
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing DISPLAY on the remote control.
,,Note
• Searching for a section within a track/file
or playing repeatedly or randomly is not
supported on the AUTO DJ mode.
• If you switch to other functions or stop
playback by pressing Z(STOP) on the
remote control twice (or STOP on the unit)
on AUTO DJ mode, AUTO DJ function will
be disable.
• AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
• All musics are repeated continuously until
the user deactivates the AUTO DJ function.
• During the AUTO DJ operation, SCAN
function is not available.
• During recording, AUTO DJ function is not
available.
• If you change a disc while the AUTO
DJ function is activated, the function is
deactivated.
DM5420-FT.AUZBLLK_5069-ENG.indd 28
2012-07-16
9:18:36
Operating 29
Using Microphone
1. Connect your microphone to the MIC 1, 2 on
the unit.
2. Play the music you want.
3.Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC VOL(+/-)
on the remote control.
,,Note
•• W
hen not using the microphone, set the
microphone volume as low as possible
or turn off the MIC. And then remove the
microphone from the MIC 1, 2.
•• If sound through the microphone is
extremely loud, it may be distorted. In this
case, press MIC VOL(+/-) to adjust the
volume.
DM5420-FT.AUZBLLK_5069-ENG.indd 29
Be sure that both FM aerials are connected. (Refer
to the page 15)
Listening to the radio
1.Press FUNCTION on the remote control
repeatedly or TUNER on the unit until FM
appears in the display window. The last received
station is tuned in.
2. Auto tuning : Press TUNING (-/+) for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUNING(-/+) repeatedly.
3
3. Adjust the volume by rotating Volume knob on
the front panel or by pressing VOL(+/-) on the
remote control repeatedly.
Operating
•• If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL(+/-).
Radio Operations
2012-07-16
9:18:36
30 Operating
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1.Press FUNCTION on the remote control
repeatedly or TUNER on the unit until FM
appears in the display window.
2. Select the desired frequency by using
TUNING(-/+).
3.Press PROG./MEMO. on the remote control.
Preset number will blink in the display window.
3
4.Press PRESET(w/s) on the remote control or
PRESET(-/+) on the unit to select the preset
number you want.
5.Press PROG./MEMO. The station is stored.
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT9 on the remote control
or LG EQ/EQ/BASS BLAST/MP3 OPT. on the unit.
You can change the LG EQ/EQ by using SOUND
EFFECT9 on the remote control or LG EQ/EQ/
BASS BLAST/MP3 OPT. on the unit while the
sound effect information is displayed on.
The displayed items for the equalizer may be
different depending on sound sources and effects.
Operating
6. Repeat the steps 2 to 5 to store other stations.
On Display
7. To listen a preset station, press PRESET(w/s)
on the remote control or PRESET(-/+) on the
unit.
NATURAL
Deleting all the saved stations
Local
Specialization
equalizer
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will blink in the display window.
2.Press PROG./MEMO. to erase all saved radio
stations.
AUTO EQ
Improving poor FM reception
Press MONO/STEREOz on the remote control.
This will change the tuner from stereo to mono.
Then the reception will be better than before.
POP
CLASSIC
JAZZ
ROCK
DM5420-FT.AUZBLLK_5069-ENG.indd 30
Description
You can enjoy comfortable
and natural sound.
Regionally optimized sound
effect. (DANGDUT/ ARABIC/
PERSIAN/ INDIA/REGUETON/
MERENGUE/ SAMBA/ SALSA)
Sets the sound equalizer on
the mode that is the most
similar to the genre which is
included in the MP3 ID3 tag of
song files.
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
VIRTUAL
You can enjoy more virtual
surround sound.
BYPASS
You can enjoy the sound
without equalizer effect.
2012-07-16
9:18:36
Operating
,,Note
•• In some of surround modes, some speakers,
there’s no sound or low sound. Depending
on the mode of surround and the source of
audio, it is not defective.
•• You may need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
•• You can not choose the VIRTUAL option,
when the MIC is connected to the unit.
Setting the USER EQ
You can listen to music with the desired sound
effect by adjusting the BASS, MIDDLE and TREBLE.
2.Press SET/CD M to enter the USER EQ.
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of external devices. (Refer to the page 17)
1. Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1(POWER) on
the remote control or 1/!(POWER) on the unit.
3. Select the AUX function by pressing FUNCTION
on the remote control or AUX on the unit.
4. Turn the external device on and start playing it.
Recording on USB
3. Select the BASS, MIDDLE or TREBLE sound effect
you want by using PRESET(-/+).
You can record various sound sources on USB.
4.Press TUNING(-/+) to select the sound level you
want.
2. Select a function you want to record first.
5. To finish the setting, press SET/CD M.
3
Operating
1.Press USER EQ on the unit.
“USER EQ” is displayed.
31
1. Connect the USB device to the unit.
3.Press RECX on the remote control or R on the
unit.
One track/file recording - You can record a
track/a file on USB while playing the file you
want.
All tracks/files recording - You can record tracks/
files on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
4. To stop recording, press Z(STOP) on the remote
control or STOP on the unit.
DM5420-FT.AUZBLLK_5069-ENG.indd 31
2012-07-16
9:18:36
32 Operating
,,Note
•• You can check the recording percentage
rate for the USB record in the display
window during recording. (MP3/ WMA CD/
AUDIO CD Only)
•• During recording, MP3/ WMA, there is no
sound.
•• When you stop recording during playback,
the file that has been recorded at that time
will be stored. (AUDIO CD Only)
•• Do not remove the USB device or turn off
the unit during USB recording. If not, an
incomplete file may be made and not be
deleted on PC.
3
Operating
•• If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed in the display
window.
•• Multi card reader device or External HDD
can not be used for USB recording.
•• A file is recorded by 2 hours (about 128
Mbytes) when you record for a long term.
•• In the state CD-G disc, USB record is not
operated.
•• You may not record more than 999 files.
•• The file number is saved automatically.
•• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
Recording on tape
Basic Setting
1. Select a function you want to record by
pressing FUNCTION on the remote control or
each of function buttons on the unit except
tape function.
2. Open the cassette tape compartment and
insert a blank cassette tape into the cassette
tape compartment.
Recording Radio, CD or Auxiliary
source
1.Press FUNCTION on the remote control or
each of function buttons on the unit to select
desired recording source, and then press
X(RECORD).
The recording start.
For your reference.
When you press X(RECORD), D(PLAY) is also
pressed automatically.
2. To pause recording
Press M(PAUSE) during recording. Press
M(PAUSE) again to resume recording.
3. To stop recording
During recording Press IR(STOP/OPEN).
* : TUNER, AUX and the like.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
DM5420-FT.AUZBLLK_5069-ENG.indd 32
2012-07-16
9:18:37
4Troubleshooting
Troubleshooting 33
Troubleshooting
Problem
Correction
No Power.
Plug in the power cord.
No picture.
•• Select the appropriate video input mode on the TV. Then the picture from the
unit appears on the TV screen.
•• Connect the video cables securely to the TV and unit.
•• Select the correct input mode of the unit. Then you can hear the sound from
the unit.
There is little or no
sound.
•• Connect the speaker cables to the connection terminals correctly.
•• Use the volume knob on the unit or VOL(+/-) on the remote control to adjust
the volume.
4
A DVD/CD will not play.
•• Insert a disc.
•• Place the disc with the label or printed side facing upwards.
•• Enter your password or change the rating level.
Humming noise heard
while a DVD or CD is
playing.
Troubleshooting
•• Insert a playable disc.(check the disc type, color system and regional code)
•• Clean the disc by using a soft cloth with outward strokes.
•• Move unit and audio components further away from your TV.
•• Adjust antenna’s position.
Radio stations cannot be •• Tune to the station manually.
tuned in properly.
•• Preset some radio stations, see page 30 for details.
•• Point the remote control at the remote sensor of the unit.
The remote control does •• Operate the remote control within about 23 ft (7 m).
•• Remove the obstacle in the path of the remote control and the unit.
not work properly.
•• Replace the batteries with new ones.
DM5420-FT.AUZBLLK_5069-ENG.indd 33
2012-07-16
9:18:37
34 Appendix
Area Codes
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
5
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Appendix
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
DM5420-FT.AUZBLLK_5069-ENG.indd 34
LY Russian
LU Federation Vietnam RU Zimbabwe SA
TH
VN
ZW
SN
2012-07-16
9:18:37
Appendix 35
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc
Menu.
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
DM5420-FT.AUZBLLK_5069-ENG.indd 35
2012-07-16
5
Appendix
LanguageCode
9:18:37
5Appendix
36 Appendix
Specifications
General
Power supply
Refer to main label.
Power consumption
Refer to main label.
Net Weight
6.1 kg
External dimensions (W x H x D)
272 x 345 x 380 mm
Operating conditions Temperature
5 °C to 35 °C (41 °F to 95 °F)
Operation status : Horizontal
Operating humidity
5 % to 85 %
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1,
AUX. IN
0.6 V (RCA jack x 2)
Tuner
FM Tuning Range
5
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Appendix
Output Power
Front : 55 W x 2 (4 Ω)
T.H.D
≤ 15 %
Frequency Response
45 Hz to 20 kHz
Signal-to-noise ratio
75dB
DVD/CD player
Frequency response (audio)
100 Hz to 18 kHz
Signal-to-noise ratio (audio)
More than 75 dB (1 kHz)
Signal-to-noise ratio (video)
More than 55 dB (1 kHz)
Dynamic range (audio)
More than 80 dB
USB
USB Version
USB 2.0 or USB 1.1
Bus Power Supply
DC 5 V
DM5420-FT.AUZBLLK_5069-ENG.indd 36
500 mA
2012-07-16
9:18:37
Appendix 37
Cassette tape player
Tape Speed
3000 ± 90 Hz
Wow Flutter
0.3%
F.F/REW. Time
120 sec
Frequency Response
125 Hz to 8 kHz
Signal to Noise Ratio
43 dB
Channel Separation
50 dB
Erase Ratio
55 dB
Front Speakers
Type
2 Way 2 Speaker
Impedance
4Ω
Rated Input Power
55 W
Max. Input Power
110 W
Net Dimensions (WxHxD)
202 x 337 x 237 mm
Net Weight(1EA)
2.57 kg
•• Design and specifications are subject to change without notice.
5
Appendix
DM5420-FT.AUZBLLK_5069-ENG.indd 37
2012-07-16
9:18:37
38 Appendix
Maintenance
Handling the Unit
Handling Discs
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
5
Notes on Discs
Trademarks and
Licenses
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Dolby, Pro Logic, and the double-D symbol are
registered trademarks of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
DM5420-FT.AUZBLLK_5069-ENG.indd 38
2012-07-16
9:18:38
DM5420-FT.AUZBLLK_5069-ENG.indd 39
2012-07-16
9:18:38
DM5420-FT.AUZBLLK_5069-ENG.indd 40
2012-07-16
9:18:38
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement