LG DM2520K Owner's manual

LG DM2520K Owner's manual
ENGLISH
РУССКИЙ
ҚAЗAҚ ТІЛІ
OWNER’S MANUAL
KARAOKE DVD MICRO
HI-FI SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
DM2520K (DM2520K, DMS2521V)
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
T he exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Getting Started
This device is equipped with a portable battery or
accumulator.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
(Mastered/ Live File System : Disc format system for
Windows Vista)
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
Disposal of your old appliance
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
6Introduction
6
– Playable Discs
6
7
7
7
7
7
8
8
8
9
11
12
– About the & Symbol Display
– Symbol Used in this Manual
– Regional Codes
Playable file Requirement
– Compatible USB Devices
– USB device requirement
– MP3/ WMA music file requirement
– Photo file requirement
– DivX file requirement
Remote control
Front panel
Rear panel
2Connecting
13
13
13
14
14
15
15
15
Connecting to speakers
– Attaching the speakers to the unit
Connections to Your TV
– Video Connection
– Component Video Connection
Optional Equipment Connection
– USB Connection
– PORT. IN Connection
3 System Setting
16
16
16
17
17
18
18
19
Adjust the Setup settings
– OSD Initial language settings
– To display and exit the Setup Menu
– LANGUAGE
– DISPLAY
– AUDIO
– LOCK (Parental Control)
– OTHERS
Table of Contents
4Operating
5Troubleshooting
21
21
22
22
22
22
22
22
23
30Troubleshooting
23
23
23
24
24
24
24
24
24
25
25
25
25
26
26
26
26
26
26
26
27
27
27
28
28
29
Basic Operations
– Disc/USB Operations
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– Selecting a subtitle language
– 1.5 times speed playback
– Starting play from selected
time
– Last Scene Memory
– Changing the character set to display
DivX® subtitle correctly - optional
– Creating your own program
– Viewing a PHOTO file
– Viewing a PHOTO file as a slide show
– Turning off the sound temporarily
– Screen Saver
– System Select - Optional
– Displaying file information
(ID3 TAG)
– Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Improving poor FM reception
Sound adjustment
– Setting the surround mode
Advanced Operations
– Listening to music from your external
device
– Karaoke Basic Playback
– Using Microphone
– VOCAL FADER
– Karaoke MENU Playback
5
1
6Appendix
2
31Specifications
33Maintenance
33 – Handling the Unit
33 – Notes on Discs
34 Trademarks and Licenses
35 Language Codes
36 Area Codes
3
4
5
6
6
1
Getting Started
Getting Started
Unique Features
Introduction
USB Direct Recording
Playable Discs
Records music to your USB device.
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Accessories
DVD-VIDEO (8 cm / 12 cm disc)
Please check and identify the supplied accessories.
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm / 12 cm disc)
Remote Control (1)
Video mode and finalized only.
Battery (2)
DVD+R: Video mode only
Supports the double layer disc also.
ON
DVD+RW (8 cm / 12 cm disc)
Video mode and finalized only.
Video cable (1)
Microphone (1)
About the & Symbol Display
ON
Karaoke Disc (1)
Microphone linking
jack (1)
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
Song book (1)
“&” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that disc.
Getting Started
Symbol Used in this Manual
DVD and finalized DVD±R/RW
r
y
MP3/WMA files, Audio CDs
u
JPG files
i
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
Playable file
Requirement
1
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
evices that support USB2.0 or
yy USB Flash Drive : D
USB1.1.
USB function of this unit does not support
yy The
all USB devices.
USB device requirement
which require additional program
yy Devices
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
,,Note
a large capacity USB, it may take longer than
yy For
a few minute to be searched.
>>Caution
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
Indicates special notes and operating features.
Indicates cautions for preventing possible damages
from abuse.
yy To prevent data loss, back up all data.
NTFS file system is not supported. (Only
yy Using
FAT(16/ 32) file system is supported.)
unit is not supported when the total
yy This
number of files is 1 000 or more.
HDD, Card readers, Locked devices, or
yy External
hard type USB devices are not supported.
port of the unit cannot be connected to PC.
yy USB
The unit cannot be used as a storage device.
Getting Started
DivX files
7
8
Getting Started
MP3/ WMA music file
requirement
1
MP3/ WMA file compatibility with this unit is limited
as follows :
Getting Started
yy Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
yy Bit rate : 32 - 320 kbps (MP3), 40 - 192 kbps
(WMA)
yy maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO9660 LEVEL 1/ JOLIET
yy We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
DivX file requirement
DivX file compatibility with this unit is limited as
follows :
yy Available resolution:
up to 800 x 600 (W x H) pixels.
yy The file name of the DivX subtitle should be
entered 45 characters or less.
yy If there is a code impossible to express in the
DivX file, it may be displayed as a “ _ “ mark on
the display.
yy If the video and audio structure of recorded
files are not interleaved, either video or audio is
output.
yy Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
Photo file compatibility with this unit is limited as
follows :
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt)
yy Max pixel in width :
Normal : 5120 x 3840
Progressive JPEG : 2043 x1536
yy Playable Codec format : “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “MP4V3”, “3IVX”.
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
yy Maximum files : Under 999
yy For Discs formatted in Live file system, you can
not use it on this unit.
Photo file requirement
yy Some discs may not operate due to a different
recording format or the condition of disc.
yy File extensions : “.jpg”
yy CD-ROM file format : ISO9660 LEVEL 1/ JOLIET
yy If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
Getting Started
Remote
control
• • • • • • a • • • • • •
1 (POWER): Switches the unit
ON or OFF.
B (OPEN/CLOSE): Opens or
closes the disc tray.
SLEEP: Sets the system to turn
off automatically at a specified
time.
TITLE: If the current DVD
title has a menu, the title
menu appears on the screen.
Otherwise, the disc menu may
appear.
SETUP: Accesses or removes
setup menu.
• • • • • • b • • • • • •
DISPLAY: Accesses On-Screen
Display.
- Adjusts the hours or minutes
to set alarm and clock.
c/v: Searches backward
or forward.
KEY CON.(b/#) : changes the
key to suit your vocal range in
KARAOKE mode.
TEMPO (-/+) : enables you
to play fast or slow the music
speed in KARAOKE mode.
• • • • • • d • • • • • •
TONE CONTROL : Adjusts man’s
or woman’s key in the karaoke
mode.
REPEAT: Selects a play mode.
9 SOUND EFFECT: Selects a
sound effect mode.
- Accesses the menu on a DVD
disc.
VOL +/- (Volume): Adjusts
volume of speaker
- Chooses an item on iPOD
mode.
@ MUTE: Mutes the sound.
TUNING (-/+): Tunes in the
desired radio station.
w/s/a/d: (up/down/left/
right) : Uses to navigate onscreen displays.
b ENTER: Acknowledges menu
selection.
x BACK: Moving backward in
the menu.
?: This button is not available.
• • • • • • c • • • • • •
Remove the battery cover on
the rear of the Remote Control,
and insert one (size AAA)
battery with 4 and 5 matched
correctly.
- Goes to next or previous
chapter/ track/ file.
MENU:
PRESET (w/s): Selects
programme of Radio.
Battery Installation
(DVD, DivX only)
C/V:
Z (STOP): Stops playback or
recording.
z MONO/STEREO:
- Starts playback.
- Selects Mono/ Stereo.
M:
- Pauses playback.
- Plays title Frame-by-Frame.
CLEAR :
- Removes a number when
setting the password.
- Removes a track number on
the Program List.
- Removes language code when
setting the disc language.
• • • • • • e • • • • • •
0 to 9 numerical buttons :
Selects numbered options in a
menu.
SHADOW : It will be highlighted
by background shadow.
S-TITLE : During playback, press
S-TITLE repeatedly to select a
desired subtitle language.
PROG./MEMO. :
- Stores radio stations.
- Creates a playlist you want to
listen to.
1
Getting Started
FUNCTION: Selects the function
and input source.
9
10
Getting Started
Remote
control
1
• • • • • • f • • • • • •
TV Control buttons : Controls
the TV. (LG TV only)
Getting Started
You can control the sound lev
el, input source, and power
switching of LG TVs as well. Hold
POWER (TV) and press PR/CH
(ws) button repeatedly until the
TV turns on or off.
?: This button is not available.
CLOCK : You can set and check
the time.
TIMER : You can turn USB, CD
play and TUNER reception on or
off at a desired time.
MIC VOL(+/-) : Adjusts
microphone volume.
ECHO VOL(+/-): Adjusts echo
volume.
SET : Confirms the setting
VOCAL FADER : enjoys the
function as karaoke, by reducing
singer vocal of music in the
various sources.
Getting Started
11
Front panel
1
3
2
4
1
Getting Started
5
6
7
8
9
a 1/! (POWER)
Switches the unit ON or OFF.
h F (FUNCTION)
Selects the function or input source.
b Disc tray
c Display window
Shows the current status of the unit.
d R (Open/Close)
Opens or closes the disc tray.
e USB Port
Connects an USB device.
fPORT.IN
The player can be used to play the music from
many types of portable player.
g MIC
Microphone jack.
T(PLAY / PAUSE)
Starts playback and pauses.
I (STOP)
Stops playback or recording.
Y/U (Skip/Search):
- Goes to next or previous file/track.
- Searches backward or forward (Press and
hold)
- Adjusts the hours or minutes to set alarm and
clock.
TUN. (-/+)
Tunes in the desired radio station.
iVOL. (+/-)
Adjusts volume of speaker or head phone.
12
Getting Started
Rear panel
1
Getting Started
1
2
a COMPONENT VIDEO (Y PB PR) OUTPUT
(PROGRESSIVE SCAN)
Connects to a TV with Y PB PR inputs.
VIDEO OUT
Connects to a TV with video inputs.
b ANTENNA (FM)
3
cSpeaker terminal
Connects the speaker cables.
d Power cord
4
Connecting
Connecting to
speakers
Attaching the speakers to the
unit
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
,,Note
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
yy Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
yy Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
yy Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
Speaker
Color
Position
R
Red
right
L
White
left
>>Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
2
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
13
14
Connecting
Video Connection
Component Video Connection
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV using a video cable.
Connect the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV using
component cables.
You can hear the sound through the system’s
speakers.
You can hear the sound through the system’s
speakers.
2
Connecting
Yellow
TV
TV
Green
Blue
Red
,,Note
If your TV accepts progressive format signals,
you must use this connection and set
[Progressive Scan] in [Display] setup to [On]
(See page 17).
Connecting
Optional Equipment
Connection
15
PORT. IN Connection
Connect an output of portable device (MP3 or PMP
etc) to the PORT. IN connector.
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
2
Connecting
,,Note
Removing the USB Device from the unit
1. Choose a different function/mode press
Z on the remote control or I on the
unit twice in a row.
2. Remove the USB device from the unit.
16
System Setting
Adjust the Setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
3
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item.
System Setting
OSD Initial language settings
When using this unit for the first time, the initial
language setup menu appears on your TV screen.
You must complete initial language selection
before using the unit. English will be selected as the
initial language.
1.Press 1 to turn the unit on.
The language setup menu will appear on the
screen.
To display and exit the Setup
Menu
1. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or F on the
unit.
2.Press SETUP.
Displays the [SETUP] Menu.
3.Press SETUP or x BACK to exit in the [SETUP]
Menu.
About help menu for Setup
Menu
Buttons
Operation
w/s
Move
w/s
Moving to another
menu.
a
Prev.
a
Moving to
previous level.
d
Select
d
Moving to next
level or selecting
menu.
x BACK
To exit the [Setup]
menu.
b ENTER
To confirm menu.
x
Close
b
Enter
2.Use w/s/a/d to select a language then
press b ENTER.
The confirm menu will appear.
3.Use a/d to select [Enter] then press b
ENTER to finish the language setup.
System Setting
LANGUAGE
DISPLAY
OSD
TV Aspect
Select a language for the Setup menu and then on
screen display.
Select which screen aspect to use based on the
shape of your TV screen.
Disc Audio/Disc Subtitle/Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Refers to the original language in which the disc
was recorded.
Display Mode
[Other]
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
To select another language, press numeric
buttons and then b ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 35. If you enter
the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turns off Subtitle.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks output progressive
signal. If your TV accepts progressive format signals,
you will enjoy accurate color reproduction and high
quality image by selecting [On]. If your TV does not
accept progressive format signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold Z for about five seconds.
The video output will be restored to the standard
setting, and a picture will be visible on your TV.
3
System Setting
[Original]
17
18
System Setting
AUDIO
LOCK (Parental Control)
DRC (Dynamic Range Control)
Initial Setting of the Area Code
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
When you use this unit for the first time, you have
to set the Area Code as shown below.
Vocal
3
System Setting
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
1. Select the [Lock] menu and then press d.
2.Press d.
To access the [Lock] options, you must input the
password you have created. Input a password
and press b ENTER. Enter it again and press b
ENTER to verify. If you make a mistake before
pressing b ENTER, press CLEAR.
3. Select the first character using w/s buttons.
4.Press d and select the second character using
w/s buttons.
5.Press b ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
d.
2. Input a password and press b ENTER.
3. Select a rating from 1 to 8 using the w/s
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4.Press b ENTER to confirm your rating selection.
System Setting
Password
19
OTHERS
You can enter or change password.
1.Select [Password] on the [Lock] menu and then
press d.
2. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again
and press b ENTER to verify.
,,Note
If you forget your password, you can clear it
using the following steps:
1.Press SETUP to display the [SETUP] menu.
2. Input the 6-digit number “210499” and
press b ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 36.
1. Select [Area Code] on the [Lock] menu then
press d.
2. Input a password and press b ENTER.
3. Select the first character using w/s buttons.
4.Press d and select the second character using
w/s buttons.
5.Press b ENTER to confirm your Area code
selection.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
,,Note
All the downloaded videos from DivX® VOD
with this unit`s registration code can be played
on this unit.
3
System Setting
3.Press SETUP to exit the menu.
DivX(R) Registration
20 System Setting
Semi Karaoke
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a
fanfare sound.
[On]
When you finished singing a score will appear
on the screen.
3
[Off]
System Setting
Fanfare and score do not appear on the screen.
SSR (Real Time Score)
This function will be shown the Score to real time
by checking interval and beat during sing a song in
the karaoke mode only.
[On]
Score bar shows levels while checking the
interval and beat.
[Off]
Score bar are not display on the screen.
This function is not supported the Semi karaoke
mode.
4Operating
Operating
Basic Operations
To
Do this
Stop
Press Z on the remote control
or I on the unit.
Playback
Press z MONO/STEREO on
the remote control or T on
the unit.
Pause
During playback, press M on
the remote control or T on
the unit.
Disc/USB Operations
1. Insert the disc by using the Disc tray or connect
the USB device to the USB port.
2. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or F on the
unit.
3. Select a file (or track/ title) you want to play by
pressing w/s/a/d.
,,Note
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
yy The unit plays only music file contained in
the USB storage device or disc automatically.
(except for folder)
press M on the remote control
Frame-by-Frame or T on the unit repeatedly
playback
to play title Frame-by-Frame.
(DVD, DivX only)
Skipping to the
next/ previous
chapter/ track/
file
During playback, press
C/V to go to the next
chapter/ track/ file or to
return to the beginning of the
current chapter/ track/ file.
Press C twice briefly to step
back to the previous chapter/
track/ file.
During playback, press and
hold c/v on the remote
control repeatedly or Y/
Locating a
point quickly by U on the unit to select the
playing a file in required scan speed.
fast forward or To return to normal speed,
fast reverse
Press z MONO/STEREO on
the remote control or T on
the unit.
Playing
repeatedly or
randomly
Press REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
-R
andom play mode : only
music files.
Slowing down
the playing
speed
In the pause mode, press
c/v to select the
required speed. (DVD only)
4
Operating
yy When playing a disc or USB Flash Drive
containing with DivX, MP3/ WMA and JPEG
files together, you can select menu of files
which you would like to play by pressing
MENU.
21
22 Operating
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
4
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the TITLE.
1.Press TITLE.
The disc’s title appears.
2. Select the menu by pressing w/s/a/d.
3.Press b ENTER to confirm.
1.Press DISPLAY to show various playback
information.
The displayed items differ depending on the
disc type or playing status.
Selecting a subtitle language
2. You can select an item by pressing w/s and
change or select the setting by pressing a/d.
During playback, press S-TITLE repeatedly to select
a desired subtitle language.
Operating
Title – Current title number/ total number of
titles.
Chapter – Current chapter number/ total
number of chapters.
Time – Elapsed playing time.
Selected total time of current title/file.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/ total number of angles.
Sound – Selected sound mode.
,,Note
If any button is not pressed for a few seconds,
the onscreen display disappears.
To display the DVD Menu
r
When you play a DVD which contains several
menu, you can select the menu you want using the
MENU.
1.Press MENU.
The disc’s menu appears.
2. Select the menu by using w/s/a/d.
3.Press b ENTER to confirm.
ry
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, Press z MONO/STEREO on
the remote control or T on the unit to play at
1.5 times speed. “dX1.5” appears on the screen.
2. Press z MONO/STEREO on the remote
control or T on the unit again to exit.
Operating 23
Starting play from selected
time
Creating your own program
ry
You can play the contents of a disc in the order
you want by arranging the order of the songs on
the disc. The program is cleared when the disc is
removed.
To start playing at any chosen time on the file or
title.
1.Press DISPLAY during playback.
2.Press w/s to select the time clock icon and
“--:--:--” appears.
4.Press b ENTER to confirm. Playback starts from
the selected time.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Changing the character set to
display DivX® subtitle correctly
- optional
y
If the subtitle does not display properly during
playback press and hold S-TITLE for about 3
seconds then press S-TITLE to select another
language code until the subtitle is displayed
properly and then press b ENTER.
,,Note
If any button is not pressed for about
10 seconds, the language code display
disappears.
1. Select a desired music file then press
PROG./MEMO. or select "#” and then press
b ENTER to add the music file to the program
list.
2. To add all music file on the disc, select “^“
and then press b ENTER.
3. Select a music file from the program list then
press b ENTER to start programmed playback.
4. To clear a music file from the program list, select
the music you want to clear then press CLEAR
or select “-“ icon and then press
b ENTER. To clear all music file from the
program list, select “=“ then press b ENTER.
,,Note
The programs are also cleared when the disc
or USB device is removed, the unit is switched
to power off or the function is switched to
others.
4
Operating
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
u
24 Operating
Viewing a PHOTO file
Turning off the sound
temporarily
i
This unit can play discs with photo files.
1. Select the DVD/CD or USB function by pressing
FUNCTION on the remote control or F on the
unit.
2.Press w/s to select a folder, and then press b
ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to
the previous folder list, use the w/s buttons
on the remote to highlight g... and press b
ENTER.
4
3. If you want to view a particular file, press
w/s to highlight a file and press b ENTER
Operating
or Press z MONO/STEREO on the remote
control or T on the unit. While viewing a file,
you can Press Z on the remote control or I on
the unit to move to the previous menu. (JPEG
menu)
Viewing a PHOTO file as a
slide show
i
1.Use w/s/a/d to highlight (
) icon then
press b ENTER to start slide Show.
2. You can change slide show speed using a/d
when (
) icon is highlighted.
About help menu for slide show.
Menu
Buttons
Operation
w/s
Rotating the
picture.
a/d
Prev./ Next
a/d
Moving to
another file.
x
Close
x BACK
Returning to
the menu.
b
Hide
b ENTER
Hiding the help
menu.
Press [email protected] on the remote control to mute
your sound.
You can mute your sound in order, for example, to
answer the telephone. And “q” will appear in the
display window.
To cancel MUTE function, press [email protected] or
adjust volume level by pressing VOL(+/-).
Screen Saver
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
System Select - Optional
You must select the appropriate system mode for
your TV system. If “NO DISC” appears in the display
window, press and hold M for more than five
seconds to be able to select a system. (AUTO/ PAL/
NTSC)
Displaying file information
(ID3 TAG)
You can check the ID3 TAG information of MP3 files
only in discs by pressing DISPLAY repeatedly.
Operating 25
Setting the Clock
1. Turn the unit on.
2.Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing C/V on
the remote control or Y/U on the unit.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET for confirm your selection.
5. Select the hours by pressing C/V on the
remote control or Y/U on the unit.
6.Press SET.
7. Select the minutes by pressing C/V on
the remote control or Y/U on the unit.
8.Press SET.
1. Turn the unit on.
2.Press TIMER. Each functions flashes.
3.Press SET when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press C/V on the
remote control or Y/U on the unit to
change the hours and minutes and press SET to
save.
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the alarm time, you can check the
setting state by pressing TIMER even when
the player is turned off.
•• If you select DVD/CD mode for alarm sound
source with a DVD/DivX CD on the disc
tray, the alarm sound source is switched to
TUNER mode automatically.
•• If you select USB mode for alarm sound
source with multi-device USB, the alarm
sound source is switched to TUNER mode
automatically.
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after which the unit
turn off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns off.
yy You can check the remaining time before
the Unit turns off.
6.Press C/V on the remote control or
Y/U on the unit to change the hours and
minutes and press SET to save.
yy Press SLEEP. The remaining time appears in
the display window.
7.Press C/V on the remote control or Y/
U on the unit to change the volume and
press SET to save.
8. You can adjust to turn alarm on or off by
pressing TIMER.
- On : Alarm function is turned on and you can
check alarm setting status.
- Off : Alarm function is turned off and you
can check “TIMEROFF” massage on Display
window.
yy Sleep function will work after dimmer.
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
4
Operating
Using your player as an alarm
clock
,,Note
•• After setting a clock function, you can set
alarm function.
26 Operating
Radio Operations
Listening to the radio
1.Press FUNCTION on the remote control or F on
the unit until FM appears in the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) on the remote
control or TUN. (-/+) on the unit for about 2
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
4
Press TUNING (-/+) on the remote control or
TUN. (-/+) on the unit repeatedly.
Operating
3. Adjust the volume by pressing VOL +/repeatedly.
Presetting the Radio Stations
Improving poor FM reception
Press d MONO/STEREO on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using 9 SOUND EFFECT.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song files.
ROCK
POP
CLASSIC
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock, pop or
classic concert.
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1.Press FUNCTION on the remote control or F on
the unit until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING (-/+) on the remote control or TUN.
(-/+) on the unit.
3.Press PROG./MEMO. a preset number will flash
in the display window.
4.Press PRESET (w/s) to select the preset
number you want.
5.Press PROG./MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET (w/s).
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“CLEAR” will flash up on the unit display.
2.Press PROG./MEMO. to erase all saved radio
stations.
BASS
(BASS BLAST)
BYPASS
,,Note
Reinforce the treble, bass and
surround sound effect.
You can enjoy the sound
without equalizer effect.
Maybe you need reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
Operating 27
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from
many types of external device. (Refer to the page
“Optional Equipment Connection” on page 15)
1. Connect the external device to the PORT.IN
connector of the unit.
You can change the key to suit your
vocal range with Key Control
You can adjust the key to 13 steps (6 steps higher, 6
steps lower and the original key).
-- The setting appears on the screen.
yy To flatten the key one by one, press the
KEY CON.(b) on the remote control repeatedly
during playback.
yy To sharp the key one by one, press the
KEY CON.(#) on the remote control repeatedly
during playback.
2. Turn the power on by pressing 1.
3. Select the PORTABLE function by pressing F on
the unit or FUNCTION on the remote control.
4. Turn the external device and start it playing.
You can give an echo effect to the sound from the
microphones.
Press the ECHO VOL(+/-) on the remote control.
1. Turn on the power of TV and unit.
To adjust the Tone Control
2. Open the disc tray and insert supplied karaoke
disc by using B (OPEN/CLOSE) on the remote
control or by pressing R (OPEN/ClOSE) on the
unit.
If you want to adjust the tone of song in the
karaoke mode.
3. Close the disc tray by using B (OPEN/CLOSE)
on the remote control or by pressing R
(OPEN/CLOSE) on the unit.
4. To enter to the KARAOKE/DVD/CD mode,
press FUNCTION on the remote control or F on
the unit.
5. Connect the microphone to the MIC jacks.
6. Press the melody number you want among the
Numeric buttons from 0 to 9.
7. If you want to cancel the selected melody
number, press the CLEAR on the remote
control.
8. To start, press z MONO/STEREO on the
remote control or T(PLAY / PAUSE) on the
unit.
9. To stop, press Z (STOP) on the remote control
or I (STOP) on the unit.
Press TONE CONTROL on the remote control
repeatedly to change MAN’s or WOMEN’s tone
To change tempo
You can use this function when you want to play
fast or slow.
yy Press TEMPO +/v on the remote control
repeatedly during singing to play faster.
yy Press TEMPO -/c on the remote control
repeatedly during singing to play slower.
Shadow Function
If KARAOKE CD caption and the song’s subtitle
are mixed up, the song’s subtitle may be invisible.
In this case, to highlight the song’s subtitle, press
SHADOW on the remote control.
-- It will be highlighted by background shadow
image.
4
Operating
Karaoke Basic Playback
To adjust ECHO Volume
28 Operating
Using Microphone
Reserving the song
1. Connect your microphone to the MIC on the
unit.
When you want to make a reservation of next
melody, you can enjoy the reservation without
waiting.
2. Play the music you want.
3.Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC VOL(+/-)
on the remote control.
,,Note
•• W
hen not using the microphone, set the
microphone volume as low as possible
or turn off the MIC. And then remove the
microphone from the MIC.
4
1. Press melody number you want among the
Numeric buttons from 0 to 9. in the karaoke disc
play mode. Melody number appears on the TV
screen.
2. To reserve, press PROG./MEMO. on the remote
control.
The melody number is reserved.
3. Repeat steps 1-2. You can reserve 8 songs.
Operating
•• If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL(+/-).
To cancel the reserved song
•• If sound through the microphone is
extremely loud, it may be distorted. In this
case, press MIC VOL(+/-) to adjust the
volume.
To cancel or change the wrong
reserved song
VOCAL FADER
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various sources. (MP3/
WMA/ CD/ etc.)
Press the VOCAL FADER on the remote control,
and “FADE ON” will appear in the display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
Each time you press CLEAR on the remote control,
the reserved song will be cancelled one by one.
Press the PROG./MEMO. to move to the desired
position, then press CLEAR to cancel the reserved
song.
Operating 29
Karaoke MENU Playback
3. RANDOM
1. To move to the main menu, press MENU on the
remote control.
The main menu appears on the screen.
You can enjoy songs randomly.
4. CHALLENGE
You can enjoy a song game dividing by two teams
of red team & blue team.
1.Select
.
2. Select a desired option on the menu by using
w/s/a/d and b ENTER.
3. Adjust the menu settings or Select a option
from the menu by using w/s/a/d and
b ENTER.
.
3.Press
.
4. Select number to
sing along with the
accompaniment.
Select one you want to activate/deactivate among
the following functions.
5. Repeat the step 4.
Change the team
of red or blue team
alternately.
Select ON/OFF to activate/deactivate.
6. When reaching
the targeted
winning number,
will
be shown on the TV
screen.
1. SETUP
2. MUSIC LIST
You can select a desired song on each music list.
Select one among followings when you selected
LOCAL SONG / POP SONG in the previous step.
Select one among followings when you selected
CLASSIC LIST in the previous step.
Select initial of song title or entire title.
7. Whether you keep
going the song
game or not, select
or
.
4
Operating
4. To move the previous mode press xBACK.
2.Select
5Troubleshooting
30 Troubleshooting
Troubleshooting
Problem
Correction
No Power.
Plug the power cord into the wall outlet securely.
No picture.
yy Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
There is little or no
sound.
yy Connect the video cables securely to both the TV and unit.
yy Select the correct input mode of the unit so you can hear the sound from
the unit.
yy Connect the audio cables into the connection terminals correctly.
yy Repalce with new audio cable.
5
Troubleshooting
yy Insert a playable disc.(check the disc type, colour system and regional
code)
A DVD/CD will not play. yy Insert a disc.
yy Place the disc with the label or printed side facing upwards.
yy Enter your password or change the rating level.
Humming noise heard
while a DVD or CD is
playing.
yy Clean the disc using a soft cloth with outward strokes.
yy Move unit and audio components further away from your TV.
yy Check the antenna connection and adjust its position.
Radio stations cannot
be tuned in properly.
yy Tune to the station manually.
yy Preset some radio stations, see page 26 for details.
yy The remote control is not pointed at the remote sensor of the unit. Point
the remote control at the remote sensor of the unit.
yy The remote control is too far from the unit. Operate the remote control
within about 23 ft (7 m).
The remote control
does not work properly. yy There is an obstacle in the path of the remote control and the unit. Remove
the obstacle.
yy The battery in the remote control is exhausted. Replace the battery with
new one.
6Appendix
Appendix
31
Specifications
General
Power supply
Refer to the main lable
Power consumption
Refer to the main lable
Net Weight
2.3 kg
External dimensions (W x H x D)
230 x 125 x 243 mm
Operating Temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 85 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Output Power
30 W + 30 W
T.H.D
10 %
Inputs/ Outputs
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p),
75 Ω, RCA jack x 2
DVD/CD
Frequency Response
40 Hz to 20 kHz
Signal-to-noise ratio
70 dB
Dynamic range
55 dB
USB
USB Version
USB 2.0 or USB 1.1
Bus Power Supply
DC 5 V
500 mA
6
Appendix
VIDEO OUT
32 Appendix
Speakers
Type
2 Way 2 Speaker
Impedance
6Ω
Rated Input Power
30 W
Max. Input Power
60 W
Net Dimensions (WxHxD)
150 x 250 x 170 mm
Net Weight(1EA)
1.74 kg
yy Design and specifications are subject to change without notice.
6
Appendix
Appendix 33
Maintenance
Handling the Unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
6
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
34 Appendix
Trademarks and
Licenses
Dolby, Pro Logic, and the double-D symbol are
registered trademarks of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
6
Copyrights
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent
copyrighted material without permission. This
product features the copy protection function
developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and
playing the pictures of these discs picture noise
will appear. This product incorporates copyright
protection technology that is protected by U.S.
patents and other intellectual property rights. Use
of this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p UNIT, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
Appendix
Appendix 35
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc
Menu.
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
6789
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
6
Appendix
LanguageCode
36 Appendix
Area Codes
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
6
Appendix
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway Canada CA India IN Oman Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg EG Malaysia Vietnam RU Zimbabwe SA
ZW
Egypt LY Russian
LU Federation MY Saudi Arabia El Salvador SV Maldives MV Senegal SN
Ethiopia ET Mexico MX
SI
NO Switzerland CH
OM Taiwan TW
TH
VN
All the claims (or proposals) related to the quality of products, as well as repairs and technical services should
be addressed to “LG Electronics Almaty Kazakhstan”, 050061, Kazakhstan, Almaty, Molodezhnaya Street 2A.
Information about the other service centers can be provided by customer support service.
MADE IN CHINA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement