Advertisement
Advertisement
MOSCOW_DKS-5550/5650_ENG_MFL39518837 DVD KARAOKE SYSTEM OWNER’S MANUAL MODEL : DKS-5550Q (DKS-5550) DKS-5650Q (DKS-5650) R CD - R/RW Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject to change without notice for improvement. The working life of this product is 7 years since the date of purchase. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service locationsee service procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 2 CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Table of Contents Before Use Safety Precautions. . . . . . . . Table of Contents. . . . . . . . . Before Use . . . . . . . . . . . . . Front Panel and Rear Panel. Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .................2 .................3 .................3 .................4 .................5 Preparation Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Operation Operation with DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16 Operation with Audio CD and MP3/WMA Disc . . . . . . . 16-17 Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . 18 Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . . . . 19 Operation with KARAOKE . . . . . . . . . . . . . . . . . . . . . . 20-24 Reference Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Troubleshooting/Specifications About Symbols About the symbol display “ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc. About the disc symbols for instructions A section whose title has one of the following symbol is applicable only to the disc represented by the symbol. DVD DVD CD Audio CDs MP3 MP3 disc WMA WMA disc JPEG JPEG disc DivX DivX disc About the symbols for instructions Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVD±R, DVD±RW and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. Notes – Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. – Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. – Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Regional code of the DVD player and DVDs This DVD player is designed and manufactured for playback of region “5” encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled “5” or “ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. 5 ote on DTS-encoded CDs When playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. Indicates hazards likely to cause harm to the unit itself or other material damage. Indicates special operating features of this unit. Indicates tips and hints for making the task easier. 3 INTRODUCTION Introduction Front Panel and Rear Panel POWER ( STANDBY/ON) Switches the player ON and OFF. PLAY ( N ) Starts playback. PAUSE/STEP ( XP/STEP ) Pauses playback. Press repeatedly for frame-by-frame playback. STOP ( x ) Stops playback. Reverse Scan/Skip ( . m) Go to previous chapter / track or to the beginning. Press and hold for two seconds for fast reverse search. Forward Skip/Scan (M >) Go to the next chapter / track.Press and hold for two seconds for fast forward search. Z OPEN / CLOSE Opens or closes the disc tray. Disc Tray Display window Insert a disc here. Shows the current status of the player. Microphone jacks (MIC1, MIC2) Remote Sensor Connect a microphone to MIC1 or Point the DVD Player remote control here. MIC2 or to both sockets. AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system. VIDEO OUT Connect to a TV with video inputs. OPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment. 5.1 CHANNEL AUDIO OUT Connect to a 5.1 channel receiver – center speaker connection – subwoofer connection – front speakers connections – rear (surround) speakers connections AC Power Cord Plug into the power source. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 4 1. 2. 3. POWER 1 4. 2 5. 3 4 PROGRAM CLEAR MALE FEMALE AUDIO SOUND MENU SHADOW CHORUS 14 13 6. 7. 8. 9. SELECT /ENTER 5 10. 6 7 TEMPO + b - KEY CON. - # 11. STOP PAUSE/STEP 12 PLAY 8 ECHO VOL. 9 10 DISPLAY TITLE 12. 13. TEMPO - MIC VOL. SUBTITLE SET UP 11 REPEAT REPEAT A-B RETURN Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction of the front of the remote sensor 14. POWER button NUMERIC buttons (0-9) • PROGRAM button • CLEAR button • AUDIO button • MALE button • SOUND button • FEMALE button ARROW buttons ( / / / ) (For use in highlighting a selection on a GUI menu screen, TITLE and MENU screen.) SELECT/ENTER button KEY CONTROL (b/#) buttons • STOP (x) button • PAUSE([])/ STEP button • PLAY (G) button • ECHO volume control (ECHO VOL. button / ) • Microphone volume control (MIC VOL. / ) button • DISPLAY button • TITLE button • REPEAT button • SUBTITLE button • SET UP button • REPEAT A-B button • RETURN button TEMPO(-/+) buttons (m/M) CHORUS button (When a Song with chorus function is played, use this button.) • MENU button • SHADOW button Remote control battery installation Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with and aligned correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 5 INTRODUCTION Remote Control Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution – Make sure the DVD Player is connected directly to the TV. Tune the TV to the correct video input channel. – Do not connect the DVD Player’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. – Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection system. Connecting to a TV Video connection the VIDEO OUT jack on the DVD Player to 1 Connect the video in jack on the TV using the video cable (V). the Left and Right AUDIO OUT jacks of 2 Connect the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables. Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™ or MPEG 2) Connect one of the DVD Player’s DIGITAL OPTICAL OUT jacks to the corresponding in jack on your amplifier. Use an optional digital audio cable. (O) Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2 va Dolby Digital). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Rear of DVD player Rear of TV VIDEO INPUT AUDIO INPUT R L O A A V OPTICAL DIGITAL INPUT R L AUDIO INPUT Amplifier (Receiver) Rear of DVD player 6 Notes – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. – Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. – To see the audio format of the current DVD in the onscreen display, press AUDIO. Connections Connecting to Optional Equipment (continued) PREPARATION Analog connection to a multi-channel A/V receiver with 6 Channel connectors (Dolby Digital, DTS) This DVD Player contains a multi-channel decoder. This enables playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder. 1 Connect the CENTER and WOOFER jacks for the Center speaker and the Subwoofer (C) to the corresponding in jacks on your receiver. the Left and Right FRONT speaker jacks 2 Connect (F) to the corresponding in jacks on your receiver. the Left and Right REAR speaker jacks 3 Connect (R) to the corresponding in jacks on your receiver. the appropriate Sound settings for Analog 4 Make Output and Speaker Settings in the setup menu. See page 11. Rear of DVD player F C Front R Front L Center Rear R Rear L Subwoofer ANALOG 5.1CH AUDIO INPUT R Amplifier (Receiver) 7 Before Operation Mini Glossary for Audio Stream & Surround mode Sound Mode The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with “ ” mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and double-D symbol are trademarks of Dolby Laboratories. When DVD is inserted BYPASS Outputs the sound from the front left and right speakers and subwoofer. DVD CD You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. a) After you select 2 channel (For example 2 ENG D 2 CH or ) by pressing AUDIO button, press SOUND button repaeatedly. - “BYPASS” indicator will be only displayed on the display 3 ENG D 2 CH window. b) After you select 5.1 channel (For example 4 ENG DTS 5.1 CH -“ 1 ENG D 5.1 CH or ) by pressing AUDIO button, press SOUND button. ” indicator will be displayed on the TV screen. When CD is inserted Each time you press SOUND button, the sound mode of Audio CD is changed on the display window as the following order. BYPASS → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → BYPASS... For your reference • Intial sound of DVD function is BYPASS. • You can identify the encoding format of program software by looking at its packaging. - Dolby Digital discs are labelled with the logo. - Dolby Surround encoded programs are labelled with the logo. - DTS Digital Surround discs are marked with DTS. ote When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). 8 Before Operation General Explanation Temporary Feedback Field Icons Title On-Screen Display General playback status can be displayed on the TV screen. Some items can be changed on the menu. On-screen display operation A-B Repeat title Repeat sequence Resume play from this point Action prohibited or not available Notes Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. 1 Press DISPLAY during playback. / to select an item. 2 Press The selected item will be highlighted. or to change the setting of an item. 3 Press The number buttons can be also be used for setting numbers (e.g., title number). For some functions, press SELECT/ENTER to execute the setting. Example: On-Screen Display during playing DVD Items Function / Action using Title Number Shows the current title number and total number of titles / skips to the desired title number. / , Numbers, or SELECT/ENTER 1 / 12 Shows the current chapter number and total number of chapters / skips to the desired chapter number. / , Numbers, or SELECT/ENTER 0:20:09 Shows the elapsed playing time / searches by elapsed time. Numbers, SELECT/ENTER 1/3 Chapter Number Time search Audio language and Digital Audio Output mode Subtitle language ABC Angle Sound 1 ENG 1/3 Bypass / to select item Shows the current audio soundtrack language, encoding method, and channel number / changes the setting. Shows the current subtitle language / changes the setting. Selection Method / or AUDIO / or SUBTITLE Shows the current angle number and total number of angles / changes the angle. Shows the current sound mode / changes the setting. / / or SOUND 9 PREPARATION This manual gives basic instructions for operating the DVD Karaoke. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Karaoke or is not available on the disc. Before Operation Initial Settings DISPLAY By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 10 to 13. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Press on the remote control. To go back to the previous level: Press on the remote control. DISPLAY TV Aspect 16 : 9 Display Mode Widescreen Move Select TV Aspect DVD 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. General Operation SETUP. 1 Press The setup menu appears. / to select the desired option then 2 Use press to move to the second level. 3 4 5 The screen will be shown the current setting for the selected item, as well as alternate setting(s). Use / to select the second desired option then press to move to the third level. Use / to select the desired setting then press SELECT/ENTER to confirm your selection. Some items require additional steps. Press SETUP or PLAY to exit the setup menu. LANGUAGE LANGUAGE OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Select OSD Select a language for the Setup menu and on-screen display. Disc Audio / Subtitle / Menu DVD Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original: Refers to the original language in which the disc was recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 25. If you enter the wrong language code, press CLEAR on the remote control. 10 Display Mode DVD Display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Before Operation AUDIO 5. Use Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. 6. Adjust options using / / / buttons. 7. Press SELECT/ENTER to confirm your selection. Returns to the previous menu. to select the desired speaker. Speaker selection Dolby Digital Bitstream DTS Bitstream MPEG PCM Sample Freq. 48 kHz 5.1 Speaker Setup Select DRC On Vocal On Move Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (Woofer), Rear speaker (Rear L) or Rear speaker (Rear R)] Select Dolby Digital / DTS / MPEG DVD Bitstream: Select “Bitstream” if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM : Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio. Sample Freq. (Frequency) DVD If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. 5.1 Speaker Setup DVD Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Press SETUP. The setup menu appears. 2. Use / to select the AUDIO option then press to move to the second level. 3. Use / to select the Speaker Setup option then press to move to the third level. “Select” is highlighted. 4. Press SELECT/ENTER and 5.1 Speaker Setup menu appears. Size Since the speaker settings are fixed, you cannot change the setting. Volume Press / to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance If you have connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. Press / to adjust the Distance of the selected speaker. Test Select “All” to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. (When the size of the Front L/R speaker is selected to “Large”, the subwoofer (Woofer) is not available.) Front L → Center → Front R → Rear R →Rear L → Woofer You can adjust the volume during operating the test tone, first use / to select Volume or Speaker option then use / buttons to select volume or speaker, so that all speaker’s volume is same from the listener’s position. Dynamic Range Control (DRC) DVD With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal DVD Set Vocal to On only when a multi-channel Karaoke DVD is playing. The karaoke channels on the disc will mix into a normal stereo sound. 11 PREPARATION AUDIO / Before Operation LOCK (Parental Control) Password (Security Code) You can enter or change password. LOCK Rating Unlock Password **** Country Code RU Move 1 Select Password on the LOCK menu then press . 2 Follow step 2 as shown left (Rating). “Change” or “New” is highlighted. 3 Enter the new 4-digit code, then press SELECT/ENTER. Input it again to verify. 4 Press SETUP to exit the menu. Select If you forget your Security Code Rating DVD Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. “Rating” on the LOCK menu then press 1 Select . access the Rating, Password and Country 2 ToCode features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify. If you make a mistake before pressing SELECT/ENTER, press CLEAR. a rating from 1 to 8 using the / 3 Select buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock If you select unlock, parental control is not active and the disc plays in full. ote If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. SELECT/ENTER to confirm your rating 4 Press selection, then press SETUP to exit the menu. 12 If you forget your security code you can clear it using the following steps: 1 Input the 6-digit number “210499” on the setup menu and the security code is cleared. 2 Enter a new code as described above. ote When “ INPUT PASSWD ” appears on the TV screen, press STOP (x) and then press SETUP to move to the setup menu. Country Code DVD Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter. “Country Code” on the LOCK menu then 1 Select press . 2 Follow step 2 as shown left (Rating). 3 Select the first character using / buttons. the cursor using button and select the 4 Shift second character using / buttons. Press SELECT/ENTER to confirm your country 5 code selection. Before Operation OTHERS PBC On DivX(R) Registration Select Move PREPARATION OTHERS Select PBC (Playback Control) Playback control provides special navigation features that are available on some disc. Select [On] to use this feature. DivX(R) Registration DivX You can show the DivX DRM (Digital Rights Management) Registration code for your unit only. Your registration code is : XXXXXXXX Please use this code to register this player with the DivX(R) Video On Demand service. This will allow you to rent and purchase videos using the DivX(R) Video On Demand format. To learn more go to www.divx.com/vod The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental an encrypt movie file. Notes If you rent the DivX VOD file, it has several options of viewing limits as show below. • Display the number which you can watch the file. ? This rental video has 7 views left. A view ends when you stop playback, play a different video, or turn off your player. Do you want to use one of your 7 views now Yes No • The rental has been expired. This rental is expired. • Display the authorization error. This video player is not authorized to play this video. 13 Operation with DVD Playing a DVD Moving to another CHAPTER/TRACK DVD Playback Setup Turn on the TV and select the video input source connected to the unit. Audio system: Turn on the audio system and select the input source connected to the unit. Z OPEN/CLOSE button to open the disc 1 Press tray. your chosen disc in the tray, with the 2 Load playback side facing down. Z OPEN/CLOSE button to close the tray. 3 Press Playback starts automatically. If playback does not start, press PLAY. In some cases, the disc menu might appear instead. If a menu screen is displayed The menu screen may be displayed first after loading a DVD which contains a menu. DVD Use the / / / buttons to select the title/chapter you want to view, then press SELECT/ENTER to start. Press TITLE or MENU to return to the menu screen. When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: Press . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY and press / to select the chapter/track icon. Then, input the chapter/track number or use / . Search ote Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu. DVD When a disc has more than one title, you can move to another title. Press DISPLAY while playback is stopped then the appropriate number (0-9) or use / to move to another title. You can play any title by inputting its number while playback is stopped. 14 DivX The player will now go into SEARCH mode. 2 Press FF or GG repeatedly to select the required speed. DVD; X2, X4, X8, X16, X100 DivX; X2, X4, X8, X16 3 To exit SEARCH mode, press PLAY. Still Picture and Frame-by-frame playback DivX 1 Press PAUSE/STEP on the remote control during playback. The player will now go into PAUSE mode. 2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. 3 To exit still motion mode, press PLAY. Slow Motion General Features Moving to another TITLE DVD 1 Press FF or GG during playback. DVD Notes – If parental control is set and the disc is not within the rating settings you must input the password. (See “LOCK” on page 12.) – DVDs may have a region code. Your player will not play discs that have a region code different from your player. The region code for this player is 5 (five). DivX DVD 1 Press PAUSE/STEP on the remote control during playback. The player will enter PAUSE mode. 2 Use the FF/GG to select the required speed: t 1/2, t 1/4, t 1/8 or t 1/16 [(backward) - DVD only] or T 1/2, T 1/4, T 1/8 or T 1/16 (forward). 3 To return to normal PLAY, press PLAY. Operation with DVD General Features (continued) Special DVD Features Repeat Checking the contents of DVD Video discs: Menus DivX DVD Video Discs - Repeat Chapter/Title/Off • Chapter: repeats the current chapter. • Title: repeats the current title. • Off : does not play repeatedly. DivX - Repeat Track/All/Off • Track : repeats the current track • All : repeats all the tracks on a disc. • Off : does not play repeatedly. Repeat A-B DVD To repeat a sequence in a title: DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the / / / buttons to highlight your selection, then press SELECT/ENTER. Title Menu DVD 1 Press TITLE. If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear. 2 The menu can list camera angles, spoken language and subtitle options, and chapters for the title. 3 To remove the title menu, press TITLE again. 1 Press A-B at your chosen starting point. “ A - ” appears briefly on the TV screen. Disc Menu 2 Press A-B again at your chosen end point. “A - B” appears briefly on the TV screen, and the repeat sequence begins. Press MENU. DVD The disc menu is displayed. 3 To cancel the sequence, press A-B. Changing the Audio Language Time Search Press AUDIO repeatedly during playback to hear a different audio language or audio track. DVD DVD The Time Search function allows you to start playing at any chosen time on the disc. Subtitle 1 Press DISPLAY during playback. The on-screen display appears on the screen. Press SUBTITLE repeatedly during playback to see the different subtitle languages. DVD The Time Search box shows the elapsed playing time of the current disc. 2 Within 10 seconds, press / to select the Time Search icon in the on-screen display. If ote appears, the feature is not available on the disc. The “-:--:--” appears in the Time Search box. 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. 4 Within 10 seconds, press SELECT/ENTER to confirm the start time. Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. 15 OPERATION DVD You can play a title/chapter/all/track on a disc. Press REPEAT during playback to select a desired repeat mode. DVD Operation with DVD and Video CD Special DVD Features DVD Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA System Select Disc You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold XP/STEP on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO). • When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. The DVD Karaoke can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. CD MP3 WMA Audio CD Once you insert an audio CD a menu appears on the TV screen. Press / to select a track then press PLAY or SELECT/ENTER and playback starts. AUTO: Select when DVD player is connected with Multi system TV. 0:00:00 1 / 12 Audio CD Program List Track1 NTSC: Select when DVD player is connected with NTSC-TV. PAL: Track2 Track3 Track4 Track5 Track6 Select when DVD player is connected with PAL-TV. Last Scene Memory Track7 Track8 DVD This player memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. MP3 / WMA 1. Press / to select a folder, and press SELECT/ENTER to see the folder contents. 2. Press / to select a track then press PLAY or SELECT/ENTER. Playback starts. 0:00:00 1 / 104 MP3 / WMA Notes – Settings are stored in memory for use any time. – This player does not memorize settings of a disc if you switch off the player before commencing to play it. Program List 1-Music1 2-Music2 3-Music3 4-Music4 5-Music5 6-Music6 7-Music7 Screen Saver The screen saver picture appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five minutes, the DVD Player will automatically turn itself off. otes • If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the / to highlight and press SELECT/ENTER. • Press MENU to go to the next page. • On a CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and MP3/WMA or JPEG word on top of the menu is highlighted. Then, use / to select MP3/WMA or JPEG then press SELECT/ENTER. Pause CD MP3 WMA 1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY or press PAUSE/STEP again. Moving to another Track CD MP3 WMA Press . or > briefly during playback to go to the next track or to return to the beginning of the current track. Press . twice briefly to step back to the previous track. In case of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. 16 Operation with Audio CD and MP3/WMA Disc Programmed Playback Repeat Track/All/Off The Program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 300 tracks (Audio CD/MP3/WMA). MP3 WMA You can play a title/chapter/all/track on a disc. 1 Press REPEAT when playing a disc. The repeat icon appears. 2 Press REPEAT to select a desired repeat mode. • Track: repeats the current track • All: repeats all the tracks on a disc. • Off(No display): does not play repeatedly. Search CD MP3 1 The player will now go into SEARCH mode. 2 To exit SEARCH mode, press PLAY. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as below. 0:00:00 List 1 Press FF or GG during playback. 0:00:00 1 / 12 1 / 104 MP3 / WMA List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Audio CD Menu Program Music8 Music1 Music16 Music2 Music5 Music3 Music9 Music4 Music5 Music1 Music7 Music6 Music6 Music7 Music3 MP3/WMA Menu 2 PROGRAM. Or, select “ Add” icon then 3 Press SELECT/ENTER to place the selected track on the Program list. Repeat to place additional tracks on the list. Select a track on the List. MP3 / WMA disc compatibility with this player is limited as follows: • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) • The player cannot read an MP3/WMA file that has a file extension other than “.mp3” / “.wma”. • CD-R physical format should be ISO 9660 • If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. • File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension. • They should not contain special letters such as / ? * : “ < > l etc. • The total number of files on the disc should be less than 999. Tip Press MENU to move to the next page. This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Erasing a Track from Program List Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. WMA Insert a disc. Audio CD WMA MP3 ote You can add all tracks in the disc. Select “ icon then press SELECT/ENTER. Add All” the track you want to start playing on the 4 Select Program list. 5 Press PLAY or SELECT/ENTER to start. Playback begins in the order in which you programmed the tracks and “PROG.” appears on the display window. Playback stops after all of the tracks on the Program list have played once. Repeat Programmed Tracks You can play a title/chapter/all/track on a disc. 1 Press REPEAT when playing a disc. The repeat icon appears. 2 Press REPEAT to select a desired repeat mode. • TRACK: repeats the current track • ALL: repeats all the tracks on a disc. • Off (No display): does not play repeatedly. 1 Use / / / to select the track that you wish to erase from the Program list. 2 Press CLEAR. Or, select “ (Delete)” icon then Press SELECT/ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. Erasing the Complete Program List Select “ (Del all)”, then press SELECT/ENTER. The complete Program for the disc is erased. ote The programs are also cleared when the disc is removed. To resume normal playback from programmed playback Select a track on the List then press SELECT/ENTER. “PROG.” disappears from the display window. 17 OPERATION CD CD Operation with JPEG Disc Viewing a JPEG disc JPEG Slide Show This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Use / / / to highlight the then press SELECT/ENTER. 1 Moving to another File Insert a disc and close the tray. The JPEG menu appears on the TV screen. (Slide Show) Press . or > once during viewing a picture to advance to the next file or to the previous file. JPEG List Preview Still Picture JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8 / to select a folder, and press 2 Press SELECT/ENTER. A list of files in the folder appears. Tip If you are in a file list and want to return to the Folder list, use the / buttons on the remote to highlight “ ” and press SELECT/ENTER to return to the previous menu screen. you want to view a particular file, press 3 IfSELECT/ENTER / to highlight a file and press or PLAY. Slide Show starts from the selected file if Speed option is not Off. While viewing a file, you can press STOP(x) to move to the previous menu (JPEG menu). Tip • Press MENU to move to the next page. • There are four Slide Speed options: : > (Slow), >> (Normal), >>> (Fast) and II (off). Use / / / to highlight the Speed. Then, use / to select the option you want to use then press SELECT/ENTER. • If you set Speed option to Off, Slide Show is not active. 18 1 Press PAUSE/STEP during slide show. The player will now go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. JPEG disc compatibility with this player is limited as follows: • Depending upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc’s contents. If you don’t see an onscreen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2760 x 2048 pixels and burn another disc. • The total number of files and folders on the disc should be less than 999. • Some discs may be incompatible due to a different recording format or the condition of disc. • Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout. • If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” file. • File names without “.jpg” extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in Windows Explorer. Operation with DivX Disc 1 Insert a disc and close the tray. The DivX menu appears on the TV screen. 0:00:00 1 / 12 DIVX List Movie Folder 1 DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 20-40 characters (differs from language). Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. Movie Folder 8 / to select a folder, and press 2 Press SELECT/ENTER to see the folder contents. Tip If you are in a file list and want to return to the Folder list, use the / buttons on the remote control to highlight “ ” and press SELECT/ENTER to return to the previous menu screen. to view a particular file, press 3 If you/ want to highlight a file and press SELECT/ENTER or PLAY. Playback starts. otes Be sure to select “SUBTITLE ON” mode by pressing the subtitle file every time before playing a DivX file . When the subtile has more than two languages in the file, original subtile is only available. Display DivX Press DISPLAY during playback. General playback status can be displayed on the TV screen. • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. • If the file is recorded with GMC, the unit supports some of 1-point of the record level. * GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoder, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. Playable DivX subtitle file z ".srt ", ".smi ", ".sub ". Playable DivX file z ".avi ", ".mpg ", ".mpeg " Playable Codec format z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) 19 OPERATION The unit can play the DivX files. Operation with KARAOKE You can play KARAOKE(singing along) with CD by connecting a microphone to the unit. You can enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer’s voice. Karaoke Basic Playback Karaoke Advanced Playback 1 on the powers of TV (or Amplifier) and DVD 2 Turn Karaoke and enter to the video mode on TV. Z OPEN/CLOSE to open the disc tray and 3 Press load supplied karaoke disc in the tray with the label facing up. Return Function Check if the system is connected. (Refer to the page 6-7.) to close the tray. 4 Press Z OPEN/CLOSE [ TV Screen] This is a function that returns to the preceding MENU. Press the RETURN . ote If there is no preceding menu (in case of the first menu), this function may not be executed. To Adjust MIC Volume Press the Microphone volume control (MIC VOL. ) button on the remote control clockwise to increase the volume, or counterclockwise to decrease it. (0~15 steps) / To Adjust ECHO Volume You can give an echo effect to the sound from the microphones. 5 the melody number you want by pressing 6 Select NUMERIC buttons. If you cancel the selected melody number, press Connect the microphone to the MIC 1 or MIC 2 jack. the CLEAR. 7 Press PLAY. The selected melody number is played. Sing in tone with microphone. After melody ends, it is stopped automatically and score appears. ote Don’t connect the microphone during playing DivX disc. Press the ECHO volume control (ECHO VOL. / ) button on the remote control clockwise to increase the echo, or counterclockwise to decrease it. (0~15 steps) Key Control You can change the key to suit your vocal range. You can adjust the key to 13 steps (6steps higher, 6steps lower and the original key). - The setting appears on the screen. Press KEY CONTROL (b/#) repeatedly on the remote control or turn KEY CONTROL (b/#) on the front panel to find the key that suits your vocal range. To flatten the key one by one, press the KEY CONTROL (b) repeatedly during playback. To sharp the key one by one, press the KEY CONTROL (#) repeatedly during playback. To return to the original key, press the KEY CONTROL (b/#) repeatedly to appear the original key. 20 Operation with KARAOKE Reserving the Songs Karaoke MENU Playback When you want to make a reservation of next melody, you can enjoy the most 8 melodies reservation Without waiting. Preparation Press the NUMERIC buttons to reserve melody number you want in the karaoke disc play mode. Melody number appears on the TV screen. OPERATION 1 Press MENU on the karaoke mode. The main MENU appears on the screen. Main MENU (On the TV screen) PROGRAM. 2 Press The melody number is made a reservation. steps 1-2. 3 Repeat You can reserve 8 songs. ip After the one song finishes its playback, the next song will be playback automatically. To cancel the reserved song Each time you press CLEAR, the reserved song will be cancelled one by one. To cancel or change the wrong reserved song SETUP ( ) by pressing / on the 1 Select main menu. / to select the desired option, and 2 Use press SELECT/ENTER. Press the PROGRAM to move to the desired position, then press the CLEAR to cancel the reserved song. ÇÍÎ Ç˚ÍÎ Male/Female Function ÇÍÎ Ç˚ÍÎ ÇÍÎ Ç˚ÍÎ If you want to sing a song of MAN’s or WOMEN’s key, press MALE( )/FEMALE( ) button repeatedly to change MAN’s or WOMEN’s key. Tempo Change You can use this function when you want to play fast or slow. • Press TEMPO + repeatedly during singing to play faster. • Press TEMPO - repeatedly during singing slower. Shadow Function If some CD caption and the song’s subtitle are mixed up, the song’s subtitle may be invisible. In this case, to highlight the song’s subtitle, press SHADOW. - It will be highlighted by background shadow image. ÇÍÎ Ç˚ÍÎ SCORE ON/OFF ( ÇÍÎ Ç˚ÍÎ ) ÇÍÎ : When singing by selection of melody, song score comes out after one piece of song is ended. To cancel it, select the Ç˚ÍÎ . FANFARE ON/OFF ( ÇÍÎ Ç˚ÍÎ ) ÇÍÎ : In condition of POWER ON, scoring fanfare operates. The fanfare sound comes out after singing finished. To cancel it, select the Ç˚ÍÎ . LYRIC ON/OFF ( ÇÍÎ Ç˚ÍÎ ) ÇÍÎ : When singing by selection of melody, song lyric appears on the TV screen. To cancel it, select the Ç˚ÍÎ . CHORUS ON/OFF ( ÇÍÎ Ç˚ÍÎ ) ÇÍÎ : When singing by selection of melody, song chorus is heard a sound. To cancel it, select the Ç˚ÍÎ . ote To move to the main menu, press MENU or RETURN. 21 Operation with KARAOKE MUSIC LIST ( ) LOCAL SONG ( SONG ( 1 SINGER LIST ( ) 1 Select and select the initial of the singer you want by pressing the / in the SONG LIST and SINGER LIST menu, and press SELECT/ ENTER. ) and POP ) Select by pressing the / on the main menu. The LOCAL SONG, POP SONG and CLASSIC menu will be shown on the TV screen. 1 5 7 A F H M R 2 Select the singer you want by pressing the and press SELECT/ ENTER. 2 Select by pressing the or / , and press SELECT/ ENTER. SONG LIST and SINGER LIST menu will be shown on the TV screen. / , 140 ìÑA . . . 3 Select the song title of the singer you want by pressing the / , and press SELECT/ ENTER. 0871 ÅEá TEÅü 2431 BAì BA 1078 áA ÑàCTOèAÑOM 1816 Oâ, Oâ 2714 ü ÅìÑì ÅEÜAT . . . 2717 ü CKìóA˛ èO T . . . SONG LIST ( ) 1 Select and select the initial of the song title you want by pressing the / , then press SELECT/ ENTER. ote 1 2 3 4 5 7 B E • To move the previous mode, select the by pressing the / , then press SELECT/ ENTER. • The special letters may not be displayed on the TV screen. 2 Select the song title you want by pressing the , and press SELECT/ ENTER. 0165 1368 1369 0001 1370 22 140 ìÑA . . . 140 ìÑA . . 140 ìÑA . . 140 ìÑA . . 140 ìÑA . . 140 ìÑA . . 10 000 KM 10 KAèEãú 1100 12-85-00 17 ãEí CìKAó ... íÄçñõ... Äêàü XAMEã... óAâî / CLASSIC ( 1 ) Select by pressing the / , and press SELECT/ ENTER in the LOCAL SONG, POP SONG and CLASSIC menu. The CLASSIC LIST and COMPOSER LIST menu will be shown on the TV screen. COMPOSER LIST ( ) 1 Select and select the initial of the composer you want by pressing the / in the CLASSIC LIST and COMPOSER LIST menu, and press SELECT/ ENTER. A B C D E F G H 2 Select the composer you want by pressing the / , and press SELECT/ ENTER. CLASSIC LIST ( ) 1 Select and select the initial of the song title you want by pressing the / , then press SELECT/ ENTER. BALAKIREV BEETHOVEN BOCCHERINI BRAHMS A B C D E F G H 3 Select the song title of the composer you want by pressing the / , and press SELECT/ ENTER. 2 Select the song title you want by pressing the , and press SELECT/ ENTER. 3802 3803 3804 3805 3806 3807 3808 3809 ABOUT FOREIGN LAN... AIR (HOLBERG) ALMOST TOO SERIOU... ANDANTE & RONDO C... ANITRA’S DANCE (P... ARABESKE OP.18 ARABESQUE NO.1 IN E ARABESQUE NO.2 IN E SCHUMANN GRIEG SCHUMANN MENDELSSOH GRIEG SCHUMANN DEBUSSY DEBUSSY / 3816 3817 3852 3904 3905 3906 3923 3924 BAGATEL OP.33 NO.1 BAGATEL OP.33 NO.4 FUER ELISE MOONLIGHT SONATA... MOONLIGHT SONATA... MOONLIGHT SONATA... PATHETIQUE SONAT... PATHETIQUE SONAT... BEETHOVEN BEETHOVEN BEETHOVEN BEETHOVEN BEETHOVEN BEETHOVEN BEETHOVEN BEETHOVEN ote To move the previous mode, select the by pressing the / , then press SELECT/ ENTER. 23 OPERATION Operation with KARAOKE Operation with KARAOKE RANDOM ( 1 ) Select the main menu. by pressing / on number you want by pressing 5 Select and press SELECT/ ENTER. Sing along with the accompaniment. / 6 7 Repeat step 4~5. Change the team of red team or blue team alternately. When reaching the targeted winning number, the 8 Whether you keep going the song game or not, will be shown on the TV screen. It appears as below. 2 Press SELECT/ENTER to begin randomly. CHALLENGE ( ) It has a function which enjoy a song game dividing by two teams of red team & blue team. 1 Select the main menu. It appears as below. by pressing / on 1 2 3 4 5 6 7 8 9 60 70 80 90 by pressing / 2 Select , and select one of NUMERIC buttons 1~9 by pressing / to select winner’s number, then press SELECT/ ENTER. by pressing / 3 Select , and select one of 60,70,80 or 90 by pressing / to select success score, then press SELECT/ ENTER. by pressing 4 Select SELECT/ ENTER. It appears as below. 0 24 / 0 , then press select below. or by pressing / as Language Code List Language Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Code 6566 6565 6570 8381 6577 6582 7289 6583 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 7074 Language Finnish French Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Lingala Lithuanian Code 7073 7082 7176 7565 6869 6976 7576 7178 7185 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 7678 7684 Language Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Code 7775 7771 7783 7776 7784 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 Language Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8376 8379 6983 8385 8387 8386 8476 8471 8465 8484 8469 8472 6679 8473 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Country Code List Choose a country code from this list. Country Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV Country Ethiopia Fiji Finland France Germany Great Britain Greece Greenland Islands Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Code ET FJ FI FR DE GB GR GL HM HK HU IN ID IL IT JM JP KE KW LY LU Country Code Malaysia MY Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Dutch Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU Country Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code SA SN SG SK SI ZA KR ES LK SE CH TW TH TR UG UA US UY UZ VN ZW 25 REFERENCE Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Troubleshooting / Specifications Check the following guide for the possible cause of a problem before contacting service. Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or audio CD indicator in the display window is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely. • The equipment connected with the audio cable is not set to receive DVD signal output. • Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The AUDIO options are set to the wrong position. • Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color system, and regional code.) • The rating level is set. • Cancel the rating function or change the rating level. • The remote control is not pointed at the remote sensor on the DVD player. • Point the remote control at the remote sensor of the DVD player. • The remote control is too far from the DVD player. • Operate the remote control closer to the DVD player. No sound. The DVD player does not start playback. The remote control does not work properly. General Power requirements . . . . . . . AC 110-240 V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . 14 W Dimensions (approx.) .430 X 43 X 260 mm (w x h x d) Mass (approx.) . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kg Operating temperature . . . 5˚C to 35˚C (41˚F to 95˚F) Operating humidity . . . . . . . . . . . . . . . . . 5 % to 90 % Outputs VIDEO OUT . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p 75 Ω, sync negative, RCA jack x 1 Audio output (optical audio) . . . . . . . . .3 V (p-p), 75 Ω, Optical connector x 1 Audio output (analog audio) . . .2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 System Laser . . . . .Semiconductor laser, wavelength 650 nm Signal system . . . . . . . . . . . . . . . . PAL/NTSC/AUTO Frequency response . . . . . . DVD (PCM 96 kHz): 8 Hz to 44 kHz DVD (PCM 48 kHz): 8 Hz to 22 kHz CD: 8 Hz to 20 kHz Signal-to-noise ratio . . . . . . . . . . . More than 100 dB (ANALOG OUT connector only) Harmonic distortion . . . . . . . . . . . Less than 0.008 % Dynamic range . . . . . . . . . . More than 100 dB (DVD) More than 95 dB (CD) Design and specifications are subject to change without notice. Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. P/NO : MFL39518837 ">

Public link updated
The public link to your chat has been updated.
Advertisement