Advertisement
Advertisement
DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6235 (Main Unit: LH-D6235X, Speakers: LHS-D6235T, LHS-D6235W) CD-R/RW Before please The connecting up, operating or repairing this read this instruction booklet carefully and working life of this product purchase. product, completely. is 7 years since the date of P/N: 3828R-D031N Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons. The exclamation mark within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance instructions in the instructions (servicing) accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in a confined space similar unit. CAUTION: This DVD/CD receiver To employs a Laser System. proper product, please read this owner 's carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). ensure use of this manual unit tion Performing controls, adjustments, or carrying out procedures specified herein may result in hazardous radi- other than those ation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is located on the back of this unit. This number is to others. You should retain this Model No. Serial No. 2 guide as a unique to this unit and not available record requested information here and permanent record of your purchase. ___________________________________ ___________________________________ Table of Contents Introduction 22-23 Operation with Audio CD and MP3 Disc .22 PlayinganAudioCDandMP3Disc. NotesonMP3Recordings.................22 . SafetyPrecautions.........................2 TableofContents..........................3 . Precautions.............................5 . . . . . . . . . . . . . . . Search.............................23 NotesonDiscs..........................5 . . . MovingtoanotherTrack...............23 RepeatTrack/All/Off...................23 PlayableDiscs...........................4 . . . Pause.............................23 BeforeUse..............................4-5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . RepeatA-B.........................23 3DSurround........................23 . RemoteControl............................7 RearPanel................................8 Preparation .23 ChangingtheAudioChannel. OperationwithJPEGDisc...................24 ViewingaJPEGdisc.....................24 MovingtoanotherFile.................24 . . . . . . . . . . StillPicture.........................24 Connections............................9-13 AerialConnections........................9 Toflipthepicture.....................24 Torotatepicture......................24 .24 NotesonJPEGRecordings. ProgrammedPlayback.....................25 Programmed Playback with Audio CD ConnectingtoaTV......................10 .11 ConnectingtoExternalEquipment. SpeakerSystemConnection...............12 SpeakerPositioning......................13 BeforeOperation.......................14-18 Mini Glossary for Audio Stream & Surround .25 ProgrammedPlaybackwithVideoCD. SpeakerSetup............................26 Mode.................................14 AdditionalInformation.....................26 SoundMode...........................14 GeneralExplanation......................15 On-ScreenDisplay.......................15 InitialSettings........................16-18 Initial Settings General Operation. 16 Language..........................16 LastConditionMemory...................26 SystemSelect..........................26 OperationwithRadio....................27-28 Presettingtheradiostations................27 Listeningtotheradio.....................27 SleepTimerSetting......................28 Picture.............................16 Dimmer...............................28 SpeakerSetup.......................17 Mute.................................28 Others.............................17 UsingHeadphoneJack...................28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . andMP3Disc..........................25 . . . . . . ParentalControl......................18 Reference Operation .19-21 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............19 . . . . . . . GeneralFeatures........................19 MovingtoanotherTITLE...............19 19 Moving to another CHAPTER/TRACK . . . . . Search.............................19 Still Picture and Frame-by-Frame Playback . LanguageCodeList.......................29 CountryCodeList.........................30 Troubleshooting........................31-32 Specification About the 20 symbols Indicates hazards for instructions likely to cause damage. SlowMotion.........................20 itself Repeat............................20 RepeatA-B.........................20 Indicates special operating Indicates tips or harm to the unit other material features of this unit. TimeSearch........................20 3DSurround........................20 Zoom..............................21 MarkerSearch.......................21 SpecialDVDFeatures....................21 TitleMenu..........................21 DiscMenu..........................21 CameraAngle.......................21 .21 ChangingtheAudioLanguage. .21 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................21 and hints for making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. "Pro Logic", and the double-D Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, Inc. All rights reserved. 2000 Digital Theater Systems, 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) addition, this unit can play a DVD-RW, DVD+RW, Kodak PICTURE CD and CD-R audio titles, MP3 or or CD-RW that contains JPEG files. Depending -- the conditions of the the CD-R/RW ment or itself, some cannot be -- on CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs irregularly shaped octagonal). It may result in or otes Some use on (Video Sections of CDs enabling On (e.g., heart-shaped malfunctions. or a only) piece assigned musical on a a video CD track number, you to locate the track you want. video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still of DVDs and Video CDs designed by the software manufacturer, playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions Types There of video CDs are two supplied with the DVDs and Video CDs. Some DVDs made for busi- purposes may not be able to be played on the types of video CDs: Video CDs PBC or equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the system via menus, search functions, typical computer-like operations. Moreover, of high resolution can be played if they are or still other pictures included in the disc. unit. code of the DVD/CD receiver and DVDs This DVD/CD receiver is designed and manufactured for playback of region "5" encoded DVD software. The region code on the labels of some DVDs 5 indicates which type of player can play those discs. This unit can only play DVDs labelled "5" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 CD and audio CD picture you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs playback operations Regional a audio CD. Each track is or an disc content ness enabling easily. Scene (the may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to some feature content the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not accompanying Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track otes -- or additional feature content, or music album. Each title is assigned a title reference number Video CD In (DVD only) DVD Video CDs not equipped with PBC (Version 1.1) Operated way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. in the same Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be disturbed the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, or turn off the volatile liquids, such as the unit. Do not leave rubber leave marks Cleaning a discs Fingerprints or and dust the disc on reduce sound with a clean quality. cloth. Wipe Before distort the can playing, picture clean the disc the disc from the centre out- wards. on a insecticide spray, or long period plastic products in of time. They will the surface. the unit To clean the cabinet use a Cleaning temperature the exterior surfaces clean use contact with the unit for Use as there may be a considerable increase inside the car. soft, dry cloth. If the surfaces soft cloth solution. Do not benzene, or use thinner, are moistened with lightly strong as a extremely dirty, detergent mild solvents such these as might damage alcohol, the surface Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD receiver is a high-tech, precision device. If optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. the " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Disc Handling Hold the disc on playback side of the disc. by the edges so that fingerprints the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function VCD1.1 Do not touch the get on A section whose title has applicable only Notes symbol display " or tape on the disc. Video CDs without the PBC (playback control) function will not CD MP3 JPEG Audio CDs. MP3 disc JPEG disc 5 INTRODUC Front Panel and Display Window STANDBY/ON OPEN/CLOSE button STANDBY indicator Lights red when the receiver is in Standby mode (off). DISPLAY PLAY button Window DISC VOLUME Tray controller VOLUME OPEN/CLOSE PAUSE/STEP PLAY STANDBY/ON STOP/CLEAR PHONES MONO/STEREO MEMORY DOWN - TUNING - UP PAUSE/STEP/MONO/STEREO Remote sensor button TUNING STOP/CLEAR/MEMORY button PHONES (DOWN/UP)/ connector SKIP/SCAN buttons Indicates current Indicates current surround mode or chapter track number Indicates current audio stream Repeat playback Indicates current mode indicators function: MEMORY indicator player Playback, Pause, TUNED indicator etc. STEREO indicator Programmed playback active Indicates current title number MUTE indicator Total ANGLE active SLEEP indicator DVD inserted VCD Video CD inserted MP3 MP3 disc inserted 6 playing time/Elapsed time/ Frequency/Sleep time/Surround mode/Volume etc. indicators Remote Control OPEN/CLOSE button POWER button AUX button BAND button CD/DVD button MUTE button DIMMER button SLEEP button INTRODUC NUMBER buttons REPEAT A-B button REPEAT button PROGRAM button SOUND MODE button AUDIO button CLEAR button PRESET(+/-) buttons VOLUME (+/-) buttons SUBTITLE button ZOOM button RETURN button ENTER button ARROW buttons For use on a GUI in highlighting selection a DISPLAY button screen, TITLE and MENU screen. menu STOP button MENU button Use the MENU button to the included menu screen PAUSE/STEP button display on PLAY button DVD SKIP/SCAN video discs. screen ) Press and hold button for about Use the TITLE button to the title / two seconds for search function. TITLE button display ( buttons SETUP button ANGLE button included DVD video discs. on SLOW SCAN (Q / R) SEARCH button buttons MARKER button Remote Control Remote control Operation Range Point the remote control at the remote sensor and press remote Angle: sensor installation Remove the the buttons. Distance: About 23 ft battery battery of the remote (7 m) from the front of the AAA AAA sensor R03 cover on the control, and insert (size AAA) batteries aligned correctly. with rear two and About 30° in each direction in front of the remote Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Rear Panel AM Antenna Connectors FM 75Ω Antenna Connector AUXILIARY INPUT Connectors SPEAKER Connectors RR LL S-VIDEO OUT Connector POWER CORD MONITOR OUT Connector Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 8 Connections Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. Connect the AM Connect he FM wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial PREATION (supplied) (supplied) RR LL otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After to fully extend the FM wire aerial. connecting the FM wire aerial, keep it as horizontal as possible. 9 Connections (Continued) to a TV Connecting Rear of TV S-VIDEO INPUT VIDEO INPUT AUDIO INPUT L R L V S RR Make the one of the capabilities LL following connections, depending existing equipment. on of your Video connection Connect the MONITOR OUT receiver to the VIDEO IN ips Depending to cable on your TV and other equipment you wish are various ways you could connect connect, there the DVD/CD receiver. Use one of the connections jack jack on the DVD/CD on the TV using the video (V). S-Video connection described below. Connect the S-VIDEO OUT Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the er to the S-VIDEO IN cable jack jack on on the DVD/CD receiv- the TV using the S-Video (S). best connections. Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly input on your TV. Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. 10 otes The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. When you connect the DVD/CD receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. Connections Connecting (Continued) to External Equipment Rear of VCR (or *LD VIDEO OUTPUT AUDIO OUTPUT L RR PREATION player, etc) R LL Connection Connect the AUX IN er to the AUDIO er, etc using (L/R) jacks on the DVD/CD receivOUT (L/R) jacks on the VCR, LD play- the audio cables. ip Press AUX on the remote control to select input to these jacks. AUX appears on the Display Window. 11 Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround cords. sound, adjust the speaker parameters (volume, distance, etc.). Center speaker Front Front speaker (Right) speaker (Left) RR LL Subwoofer Rear speaker (Right surround) Rear speaker (Left surround) otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, Do not remove the front cover of supplied speaker. 12 adjust the volume carefully to avoid excessive output on the speakers. Connections Speaker Positioning In the of normal case position the 6 use speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? play Front speakers According to your listening position speakers to 45 degree. Centre speaker speakers The centre ? the excellent bass and front sound, DTS digital surround set up the speakers are for speakers ideally the equal same or Dolby Digital surround, distance. And height. But by hearing position normally place it above or you should connect a set up the interval between below the television. Rear speakers right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse Place left and the sound. In the rear ? case of speakers a smaller above 60 room - 90 size, if the audience is cm than the listener's near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Speaker (Left) Speaker Front Speaker (Right) Rear Rear Speaker (Left) Speaker (Right) Speaker Positioning Example 13 PREATION Before Operation Glossary for Mini Audio Stream & right speakers and subcompletely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. woofer. Standard two channel Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark. DTS Digital You tional of the degree sound field. The trademark of DTS Technology, LLC. under license from DTS Technology, LLC. term DTS is a Manufactured a true 360 (stereo) sources Sound Mode Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in excep- clarity throughout (2CH STEREO) the sound from the front left and Outputs Surround mode and BYPASS enjoy surround sound simply by selecting one pre-programmed sound fields according to the can program you want to listen to. Press SOUND MODE repeatedly until the sound mode display window as below. you want appears in the The Dolby Digital surround format lets you enjoy up to 5.1 digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. channels of "" When PCM indicator is display Each time you press SOUND MODE button, the sound changed in the following order; PRO LOGIC Use this mode when playing "" movie or Dolby Digital mark. This mode provides → PL2 MOVIE the effect being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Logic PL2 MUSIC → PL2 MATRIX → When DVD is inserted. You can PRO change the sound mode of DVD (Dolby Digital, DTS, LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Each time you press AUDIO button, the sound mode of DVD is as the following order; II creates five full-bandwidth from two-channel → BYPASS changed (II) Pro → 2 channel of Dolby in the mode is 3D SURROUND which carries the only displayed window: sources. This is done using →→→ output channels an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. For your reference MOVIE mode: ? The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. The DVD/CD Receiver memorizes the last mode settings ? for each source individually. identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled with the logo. DTS Digital Surround discs are marked with DTS. You can - MUSIC mode: The Music mode is for and provides a with any stereo music recordings, deep sound space. The Music mode use wide and includes controls that allow the sound to be tailored to individual listening tastes. - - MATRIX mode: The Matrix mode is the the Music mode except that the logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the same as directional enhancement audio to mono. 3D SURROUND This unit can produce a 3D Surround effect, using 3D Surround technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel Sound audio from a encoded with 14 home theatre. This feature works with DVD discs Dolby Pro Logic and Dolby Digital audio tracks. otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). Sound Mode is not applicable when headphone is used. Before General This manual Operation (Continued) Explanation operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives General screen. playback 1 2 is not available on status can Temporary Repeat Chapter Repeat Track Repeat All Tracks Repeat A-B Repeat Off ALL AB OFF Resume during playback. Press 3/4 to select an an item. For some setting functions, setting. Title TRACK be displayed on the TV changed on the menu. The selected item will be number). CHAPT display operation Press DISPLAY title of setting be also be used for Feedback Field Icons Repeat TITLE the disc. can be (e.g., can press ENTER to execute the Display Some items On-screen or numbers the change The number buttons basic instructions for the DVD/CD receiver On-Screen Press 1/2 to 3 Action play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available item. otes highlighted. Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. on-screen DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language Digital Audio Output mode and Subtitle language Angle 5.1 CH ABC OFF 1/1 Sound VCD2.0 D BYPASS and skips to the desired title number. Shows the current chapters, and Shows the number and total number of chapter skips to the desired chapter elapsed playing time, and point directly from the elapsed searches the number. time. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and the Numbers, ENTER 1/2,or AUDIO SUBTITLE angle number and total changes the angle number. Shows the current sound changes 1/2,or Numbers, ENTER, SKIP 1/2,or setting. Shows the current angles, and 1/2,or Numbers, ENTER mode, number of and setting. 1/2,or ANGLE 1/2,or SOUND MODE VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time 0:20:09 Audio Channel and PBC On Shows the mode, BYPASS changes and number, total number of tracks skips to the desired track number. elapsed playing Shows the audio STER. Sound titles, Selection Method channel, the setting. 1 /2,or Numbers, ENTER (Display only) and -- 1 the audio channel. Shows the current sound changes time Selection Method /2,or AUDIO mode, and 1 /2,or SOUND MODE 15 PREATION Before Initial Operation (Continued) Language Settings You can set your own Personal Preferences DVD/CD receiver. on the Disc Language Select DVD language a for the disc's Menu, Audio, and Subtitle. Initial 1 General Settings Operation Other Press SETUP. The setup menu original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language Original appears. : : The To select another code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Spanish Code Italian Aspect Menu English Disc Menu French Rating German TV Polish Spanish Code Italian Aspect Menu Hungarian 5.1 Original Disc Subtitle Country Chinese Language Disc Audio Chinese Language Polish Other------------ Speaker Setup Hungarian Others 5.1 Other------------ Speaker Setup Others 2 Press 3/4 to select the desired item. The screen selected will show the current item, as well as setting for the setting(s). alternate Menu Select 3 4 While the desired item is selected, press 2, then 3/4 to select the desired setting. you Language a see language Press ENTER to confirm your selection. Some items require additional steps. 5 setup SETUP, RETURN, or setup menu. Disc Audio Russian Disc Subtitle This is the menu English Disc Menu Rating Country TV Press for the when you press SETUP. Menu PLAY to exit the Code Aspect Language menu. 5.1 Speaker Setup Others Picture TV Aspect DVD 4:3 Letterbox: Select when nected. Displays a standard 4:3 TV is theatrical above and below the images picture. 4:3 Panscan: Select when a with masking con- bars conventional TV set is connected. The video material formatted in the Pan & Scan style picture are is played off). back in that 16:9 Wide: Select when a sides of the 16:9 wide TV is connected. Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating Country TV 5.1 Code Aspect Menu Language Speaker Setup Others 16 style (Both cut Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You DVD Play can DVD set up the DVD/CD receiver so a DVD disc starts playing whenever the DVD is insert- automatically Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) ed. If Auto Play will search play mode is set to a back the title On: Auto Off: Auto Play Play On, this DVD/CD receiver title that playback time automatically. is longest and then function is activated. function is not activated. Disc Audio Disc Subtitle R Disc Menu Country TV ote Code Volume Play function may not work for some DVDs. Small Distance Language The Auto 0 dB Size Aspect Menu R Front L Rating 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, Vocal, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC Rating Auto Country TV Off Code Aspect Menu 5.1 On Play Language Speaker Setup Others Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the at a quietest ones). Then, you may losing clarity lower volume without listen to a movie of sound. Set DRC to On for this effect. Vocal Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. 17 PREATION Before Operation (Continued) Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country to the applies complete the disc. These scenes on disc from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are are TV 6 5 Rating 1 4 Code 3 Aspect Speaker Setup Unlock Speaker Setup Select the Others using Country 2 step 3 4 5 6 selection, Code is 1 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. 3 of Shift the "Rating" to create a is selected, press 2. "Rating" personal 4-digit security password. then 4-digit password again and tons to confirm the Changing pass- If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Ratings 1 to 8: Some discs contain scenes played. Higher rated unless an alternative scenes scene is available The alternative must have the lower one. back will or 5 If no the same played the disc. or a found, play- rating level in 4-digit password order to play the disc. ote This function may not work for some DVDs. the 1 Follow Enter the old 3 Select Steps 4-digit 1-2 as is necessary when the 4-digit code" code shown above to the left (Rating). code, then press ENTER. Change using 3/4 buttons then press ENTER. 5 new 4-digit code, then press exactly the same code a second fy by pressing ENTER. 6 Press SETUP to exit the 4 Enter the ENTER. Enter time and veri- If you menu. If you selection, forget forget 4-digit your your password, code to clear the current pass- word, follow the procedure below. 1 Press SETUP to 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". must enter the Press ENTER to confirm your rating then press SETUP to exit the menu. 18 on rating suitable alternative is stop. You change will not be button and select the not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be the 3/4 buttons. 3/4 buttons. 4-digit password changed (see "Changing 2 a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. using ote below.). personal 4-digit security left. Confirmation of the the code is word, then press ENTER. on Press ENTER to confirm your country code then press SETUP to exit the menu. When you have already registered a password; Enter a 4-digit password using the numbered but- Select using 2 using cursor second character press ENTER. Enter the press ENTER to verify. on selected, press 2. Select the first character Select the 3/4 buttons menu. Follow Change Code Country setup While 2 Language 1 5.1 Language Others Disc Menu Menu Code Aspect Menu 5.1 7 TV RU Rating Country 8 Disc Subtitle Country Code Set Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list List", page 30.). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated whose standards country/area Code (See "Country to or scenes are a used to rate the DVD video The 3 4-digit password Enter a new (Rating). code is cleared. as shown above to the left Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD VCD2.0 the TV and select the video General Features ote VCD1.1 input Unless stated source con- nected to the DVD/CD receiver. Audio the 1 system: Turn input source on the audio system and select connected to the DVD/CD receiver. Press OPEN/CLOSE to open the disc Load your chosen disc in the side facing down. 2 playback 3 READING appears starts Moving tray. When automatically. might The or displayed may be displayed first after Video CD which offers a menu. view, then press ENTER Press TITLE loading a or title/chapter you playback. to start MENU to return to the menu screen. (0-9) to select title number. a a title, then press ENTER. to another CHAPTER/TRACK 1 /12 a title on a more chapter/track disc has than as 1/3 one more than track, you one chapter can move or a to another follows: briefly during playback beginning of the current chapter/track or to select the next chapter/track. Press SKIP/SCAN . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the Use the number buttons to select the track you want to view. Press RETURN to return to the setting menu screen. chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9) or press 2 to select the chapter/track, then press ENTER. operating procedures for depending on the disc. the menu may differ Follow the instructions on the each ote For menu screen. You also may set PBC to Off under 17. setup. See page two-digit numbers, press (0-9)in rapid succession. Search otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental 1 and the exact using -- to can move Press SKIP/SCAN .or > VCD2.0 -- title, you to return to the Use the 1 234 buttons to select the Menu one follows: VCD1.1 disc has DVD want to than DISPLAY, then press the appropriate number Moving menu screen DVD DVD appear When is as more Press 1 2 to select DVD a menu screen disc has button tray. instead. If a Press the TV screen, and playback If playback does not start, menu to another TITLE another title on press PLAY. In some cases, the disc use 1/3 tray, with the Press OPEN/CLOSE to close the otherwise, all operations described the remote control. Some features may also be available on the Setup menu. Control", (see page 18). region code. on DVDs may have a Your receiver will not play VCD2.0 VCD1.1 1 Press and hold SKIP/SCAN . two seconds or > for about during playback. The receiver will now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). to select the discs that have code different from your receiver. The this receiver is 5 (five). DVD the numbered buttons a region region code for 3 To return to normal play, press PLAY. 19 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD VCD1.1 To during playback. The DVD/CD receiver will 2 You can advance the pressing A* Frame-by-frame playback 1 Press PAUSE/STEP now go into PAUSE mode. picture frame-by-frame by repeatedly on the remote AB repeat a " A* VCD2.0 1 Press SLOW SCAN m on briefly begins (" Time Search title: a the TV again on starting point. screen. at your chosen end point. the TV screen, and the repeat appears the display window). " 0:20:09 DVD -:--:-- The Time Search function allows you to start any chosen time on the disc. during playback. The DVD/CD receiver will enter SLOW mode. 2UsetheSLOWSCANmorMtoselectthe 1 Press DISPLAY required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). To return to normal play, press PLAY. display appears ote The during playback. the on on-screen elapsed playing time of the current disc. 2 Within 10 seconds, press 3/4 on-screen to select the Time display. The "-:--:--" appears in the Time Search box. Slow motion playback in is not reverse applicable for 3 Within 10 Video CD. the seconds, required Repeat CHAPT DVD VCD2.0 TITLE TRACK DVD Video Discs repeat the the number buttons to enter right hours, minutes, and in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD1.1 ALL OFF 4 Within 10 seconds, press ENTER confirm the start time. Repeat Chapter/Title/Off - use start time. Enter seconds from left to currently playing chapter, Playback an press invalid starts from the selected time or on press PLAY to the disc. If you enter time, playback will continue from the current point. REPEAT. The 2 To Repeat Chapter icon appears on the TV 3D Surround screen. repeat the title currently playing, press REPEAT VCD2.0 DVD VCD1.1 a BYPASS 3D SUR second time. The Repeat 3 To exit The Title icon appears Repeat mode, Repeat on the TV screen. press REPEAT Off icon appears on the TV a This unit third time. screen. Video CDs repeat The 2 To - Repeat the track Repeat currently playing, on press REPEAT. the TV repeat the disc currently playing, press REPEAT The Repeat The Repeat mode, Repeat on the TV a screen. press REPEAT Off icon appears on the TV a third time. screen. ote On a setup 20 Video CD with menu to use PBC, you the Repeat 3D Surround must set PBC to Off effect, which playback conventional stereo instead of the five speakers, speakers normally required a from two or to listen to home theater system. 1 Press SOUND MODE to select "3D SUR" 2 To turn off the 3D Surround MODE All icon appears a during playback. screen. second time. 3 To exit produce multi-channel audio from Track/All/Off Track icon appears can simulates multi-channel audio more 1 To at playing screen. The Time Search box shows the Search icon in the 1 To VCD1.1 3 To cancel the sequence, press REPEAT A-B. VCD1.1 M or briefly appears "AB" appears press PLAY. DVD sequence in " sequence Slow Motion VCD2.0 OFF 2 Press REPEAT A-B control. play, DVD 1 Press REPEAT A-B at your chosen PAUSE/STEP 3 To return to normal 3 A-B Repeat (continued) on function. See page 17. the again effect, press SOUND to select "BYPASS". with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the normal resume playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. ote The Zoom function may not work for some 2 The DVDs. Marker Search VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle 3 To menu menu will appear angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on may appear. again. VCD1.1 Disc Menu MARKER SEARCH 1/9 DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press MENU. You can nine points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a During disc playback, press MARKER when playback reaches the spot that you want to Camera Repeat step on the TV briefly. screen 1 to enter up to nine Marker points on a disc. To Recall DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene a Angle If the disc contains memorize. The Marker icon will appear 2 The disc to angle appears on the TV a screen. 1 ENG 1 disc During playback, The MARKER SEARCH 2 Within 10 press SEARCH. menu will appear seconds, press 1/2 buttons to select a or use on the screen. the number Marker number that you want to recall. 3 Press ENTER. will start from the Marked Playback 4 To remove scene. the MARKER SEARCH menu, press Changing the Audio Language Press AUDIO ferent audio 1 a During disc playback, The MARKER SEARCH Press AUDIO repeatedly during playback to hear (STER., LEFT or RIGHT). 2 on the screen. dif- VCD1.1 a dif- ferent audio channel DVD different subtitle erase. ABC 1 ENG repeatedly during playback languages. to see the ote Press CLEAR. If The Marker number will be erased from the list. 4 a Press 1/2 to select the Marker number that you want to 3 will appear VCD2.0 Press SUBTITLE press SEARCH. menu to hear the Audio Channel Subtitles Marked Scene 5.1 CH Changing SEARCH. To clear repeatedly during playback language or audio track. D DVD Repeat steps 2 and 3 to erase appears, the feature is not available on the disc. additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 21 OPERATION with Audio CD and MP3 Disc Operation Playing an Audio CD and CD Notes can CD-ROM, CD-R on or play MPEG1 audio CD-RW discs. playing MP3 recordings, Recordings on right. read the notes on files that have MP3 1 disc and close the Audio MP3 Disc screen compatibility limited follows: 1. 2. 3. MP3 4. JPEG Press 3/4 to select the MP3 then press ENTER PLAY. or The MP3 menu appears on the TV screen. Press RETURN to move to the MP3-JPEG choice menu. A single TRACK 4.mp3 6. TRACK 5.mp3 TRACK 6.mp3 Clear All TRACK 8.mp3 00:00 a folder, and ENTER or a PLAY. track then press PLAY the current track's or elapsed playing time will appear on the display window and Playback will stop at the end of the disc. Audio CD menu. to the next page. move Press MENU to move to the previous MP3 menu Program File names Program MP3 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK04 TRACK 3.mp3 TRACK 5.mp3 TRACK 6.mp3 Clear All TRACK08 STER. 0: 56: 18 BYPASS TRACK 7.mp3 Clear All TRACK 8.mp3 00:00 1 OFF ip are in To 22 file list and want to return to the Folder the 3/4 to return to the 5 a and highlight previous menu screen. stop playback can- MP3 use a new at any other using 8 letters or less extension 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than This DVD/CD receiver requires discs/recordings to meet optimal playback quality. Pre-recorded DVDs are automatically certain technical standards in order to achieve set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 files). That require certain pre-existing conditions (see above) to insure compatible playback. press ENTER to time, press STOP. permission is in order to download MP3 files and music from the Internet. Our company has no right to grant such permission. Permission should always be TRACK 4.mp3 TRACK07 should be named incorporate ".mp3" Customers should also note that menu TRACK02 TRACK06 track, it playback page. TRACK01 TRACK05 MP3 files in the first MP3 file in the 1st MP3 files. If you wish to format all the data in the disc or required CD no system. requires 650. ENTER. use ISO9660 file session disc e.g. "********.MP3". OFF 1 3 A list of files in the folder appears. If you an and must TRACK 7.mp3 Press TITLE to with this receiver is one. TRACK 3.mp3 Playback starts. During playback, MP3 file that ".mp3". playback files, TRACK 2.mp3 Press 3/4 to select an - not Program Press 3/4 to select not read Sampling Frequency / only at 44.1kHz Bit rate / within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD Creator", which creates 5. TRACK 1.mp3 4 as track. If there is MP3 list, can file extension other than a tray. CD; Audio CD menu appears on the TV go to step 4. MP3 disc; The MP3-JPEG choice menu appears on the TV screen. Go to step 2 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". The DVD/CD receiver has a Recordings An MP3 file is audio data MP3 formatted record- Before Insert MP3 on About MP3 MP3 The DVD/CD receiver ings MP3 Disc sought from the copyright owner. with Audio and MP3 Disc Operation CD Pause 3D Surround MP3 1 Press PAUSE/STEP during playback. 2 To return to ENTER playback or In > to go to the next track. a 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- a home theater briefly to step back to or system. OPERATION during playback. 2 To turn off the 3D Surround MODE again effect, press SOUND to select "BYPASS". track. of audio CD, the track number directly to any track, enter the numbered buttons (0-9) to go using during playback. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a (STER., LEFT, or RIGHT). CD different audio channel Repeat Track/All/Off 1 To produce can simulates multi-channel audio channel audio from MP3 briefly during beginning of the current or to return to the previous case or CD 1 Press SOUND MODE to select "3D SUR" Press SKIP/SCAN . twice the CD another Track Press SKIP/SCAN . track This unit press PLAY, PAUSE/STEP playback, again. Moving to (Continued) CD MP3 repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on menu screen. 2 To repeat all tracks disc, press REPEAT on a a sec- ond time. The Repeat 3 To cancel The icon and "ALL" appears Search icon and "OFF" appears CD two seconds during playback. The now will the on a third time. menu screen. MP3 1 Press and hold SKIP/SCAN . player menu screen. press REPEAT Repeat mode, Repeat the on > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). to select the Search speed and direction are indicated on the menu screen. 3 To return to Repeat To 1 repeat A-B a CD sequence. During disc playback, sen starting point. The Repeat icon and "A 2 Press REPEAT A-B The press PLAY. playback, Repeat press REPEAT A-B at your cho* " appears the on menu screen. at your chosen end point. icon and "AB" appears on the menu screen, and the sequence again begins to play repeatedly. 3 To exit the sequence and return to normal REPEAT A-B again. The Repeat icon and "OFF" appears on the play, press menu screen. 23 Operation Viewing with JPEG Disc JPEG disc a Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a to another File Moving JPEG can disc and close the The MP3-JPEG choice on appears during The DVD/CD receiver will the TV 2 To return to the slide screen. while once or to the viewing a previous file. Still Picture 1 Press PAUSE/STEP tray. menu > or to advance to the next file picture PAUSE/STEP slide show. now go into PAUSE mode. show, press PLAY or press again. MP3 To JPEG flip the picture Press 3/4 while 2 horizontally Press 3/4 to select the JPEG then press ENTER. The JPEG menu on appears the TV or To rotate screen. Press 1/2 JPEG Folder2 to picture a the flip picture picture during showing clockwise picture Folder1 showing vertically. or a picture to rotate the counterclockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide Speed Depending Off upon the size and number of the JPEG a long time for the DVD/CD receiv- files, it could take 3 Press 3/4 to select a folder, and press ENTER or PLAY. er to read the disc's contents. If you don't A list of files in the folder appears. Press RETURN to move to the MP3-JPEG choice menu. --- Total number of files and folders list, are " in file list and want to return to the Folder a the 34 buttons use " on on the remote to highlight Some disc may be incompatible due to different recording format or condition of disc. When you are using software such as Creator" to burn the jpeg files into the and press ENTER to return to the previous menu screen. that all the selected files have the If want to view you 4 highlight a particular file, file and press ENTER the file proceeding starts. a or Viewing During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to JPEG move press 3/4 to PLAY. move to to the next page. Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 1024X768 Slide Speed Press MENU to 5/32 Off move to the viewing Slide 1024X768 previous Picture5.jpg page. ip There are three Speed options: Fast, to highlight the Slide select the option you want to Normal, Slow, and Off. Press 1/2 Speed then press 3/4 to use, and press ENTER. To stop viewing The JPEG 24 copying menu at any other appears. time, press STOP. into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have File them names ".jpe" or ".jpeg" extensions, please as ".jpg" files. without be read by files shown are explorer. Folder1 5/32 when rename to Picture1.jpg 5 the disc should be less than 650. ip If you see an on- display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen ".jpg" extension will not be able to this DVD/CD receiver. Even as JPEG image though the files in windows Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 ote function enables you to store your favourite tracks from any disc in the player memory. Program Program during playback or in Program Edit mode. mode to enter the E The mark will appear to the right of the word the right side of the menu screen. on On a Video CD with setup menu to must set PBC to Off PBC, you the use on the function. See page 17. Program contain 30 tracks. can Press PROGRAM 1 with Video CD Programmed Playback and MP3 Disc The MP3 the stop Program Insert Video CD and close the 1 2 Press PROGRAM while The VCD Program menu OPERATION tray. playback is stopped. will appear. Program VCD E TRACK 1 TRACK 2 ote TRACK 3 Press PROGRAM to exit the Program Edit TRACK 4 mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 Program to place the list. ote 2 to Repeat step Program list. 3 place on the E Program MP3 RETURN, PROGRAM TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 3 TRACK 2.mp3 TRACK 4.mp3 TRACK 3.mp3 TRACK 5.mp3 TRACK 6 STER. Clear All TRACK 8.mp3 BYPASS 00:00 Follow 2-6 of steps OFF 3 resume track you selected last is highlighted on the program list. Press 3/4 to select the track you want to start Press PLAY playback, window. Tracks a the program second time. Repeat on icon and "ALL" appears Repeat mode, Repeat on on the TV the TV press REPEAT icon and "OFF" appears on screen. list, press screen. a the TV third time. screen. ENTER to start. Playback stops after have played once. 7 REPEAT The in the order in which you programmed the tracks and "PROG." appears on the menu screen. resume display icon and "TRACK" appears Repeat repeat all tracks To cancel move or in the repeat the track currently playing, press REPEAT. The to the next page. Press MENU to move to the previous page. To To The To 5 playing. 6 Playback begins from disappears Repeat Programmed Press TITLE to with left. menu Press 2. programmed on normal "PROG." indicator MP3 menu "Programmed Playback Audio CD and MP3 disc" To TRACK 7.mp3 Clear All TRACK 8 The Program playback 4 programmed playback, press PROGRAM. TRACK 6.mp3 TRACK 7 4 PLAY to exit the TRACK 3.mp3 TRACK 4.mp3 TRACK 5 Audio CD or E TRACK 8.mp3 TRACK 1 0: 56: 18 Press menu. Program CD additional tracks all of the tracks normal select a on the Program list Erasing a Track from 1 Press PROGRAM MP3 disc only) or Program List during playback (Audio CD and to enter the Program Edit stop mode. playback from track of CD programmed (or MP3) list and then press ENTER or PLAY. "PROG." indicator disappears in the display window. E The mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing 1 Follow List" as the whole steps 1-2 of Program "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear The Program complete Program The programs are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. 25 Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD receiver memorizes the Disc Subtitle R Disc Menu Code Volume Menu 0 dB Size Aspect switch off the player. If you load a disc that tings memorized, the latest stop position is ly recalled. Small Distance Language user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or Front L Rating Country TV R 1 ft Test has its setautomatical- Return 5.1 Speaker Setup otes Others -- -- 1 Select "5.1 Speaker Setup" using buttons the 2 While "5.1 on setup the 3/4 is System Press 2 buttons to select the desired speaker. You must select the TV 341 2 buttons. Select appropriate system mode for your system. If NO DISC appears in the display window, press and hold PAUSE/STEP on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, Speaker Select selection or AUTO). When the selected that you want to speaker adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), Subwoofer)) a ers system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD receiver is connected with Multi NTSC: ote Certain speaker settings are prohibited by Digital licensing agreement. the PAL: adjust the output +6dB) level of the selected ~ Size Since the speaker settings settings. fixed, you are cannot change Distance If you connected speakers to your DVD/CD receiver setting the Distance lets the speakers know how far the , sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press ENTER to test the Adjust signals of each speaker. signals the volume to match the volume of test memorized in the Front Left Rear Left (L) (L) system. → Front → Rear Right (R) Right (R) → Centre → Subwoofer → Return Press ENTER to return to the 26 Select when DVD/CD receiver is connected with PAL-TV. Press 1 / 2 to the system TV. Select when DVD/CD receiver is connected with NTSC-TV. Dolby Volume speaker. (-6dB disc if com- selected, press 2 button. 3 4 Adjust options by using time. a you switch off the DVD/CD receiver before mencing to play it. menu. Speaker Setup" Settings are stored in memory for use any player does not memorize settings of This previous menu. with Radio Operation Presetting You can ing, make that you have turned down the volume. Press BAND 1 on the remote control until FM AM appears in the 2 3 or window. display And then every time you press AM changes alternately. or panel for about two seconds frequency indication starts to change, 2 until the appear in the stereo (for FM appears in the dis- or window. play Press PRESET +/- repeatedly to select the pre- set station you want. Each time you press the button, the DVD receiver tunes in one preset station at time. a the volume when the DVD/CD Receiver tunes in display Press BAND until AM then by rotating VOLUME on the by pressing VOLUME + or on the control repeatedly. 3 Adjustpanel release. station. "TUNED" and "STEREO" 1 The last received station is tuned in. on the front Scanning stops Preset radio stations in the DVD/CD receiver's memory (see "Presetting radio stations" on the left). first FM and BAND, Press and hold TUNING to the radio Listening 30 stations for FM and AM. Before tun- preset sure the radio stations front a remote program) window. or - To turn off the radio Press POWER to turn the DVD/CD receiver off another function mode ote "TUNED" appears when the only signal To listen to 4 A on the front panel. For manual the front on Press TUNING or to select the on the front preset number you or For automatic want. 6 7 on the front panel again. 3 to 6 to store other stations. To select You station with a Press TUNING a weak to tune in the station signal repeatedly or in step 3 manually. To clear all the stored stations Press and hold MEMORY for about two seconds and "CLEAR ALL" is then press appeared in the display window and MEMORY again, the stations are cleared. If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and tuning in step 2. tuning, or press and hold TUNING for about two seconds on the front change preset radio station directly a can use to select To tune in select panel. The station is stored. Repeat steps automatic tuning, press TUNING panel repeatedly. or Press MEMORY or AUX). non-preset radio stations Use manual preset number will flash in the display window. 5 panel or is FM and STEREO. Press MEMORY (CD/DVD the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 a (within 3 seconds). For your reference If an FM program is noisy Press MONO/STEREO. panel so that display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo "STEREO" disappears on the front in the effect. To improve reception supplied antennas. Reorient the to normal mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 OPERATION with Radio Operation Timer Sleep You can cally 1 at Dimmer Setting set the DVD/CD receiver to turn off automati- a specified The SLEEP indicator and sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The display 28 on Press the change the brightness of the display panel during in power-on status. DIMMER repeatedly. the front Mute Press MUTE to mute your unit. can mute your unit in order, for You the telephone, window. remaining time appears in the to example, "MUTE" indicator flashes in the answer display window. Using Headphone ote You This function will window time. Press SLEEP to set the desired play 2 (Continued) Connect a stereo Jack headphone plug ( 3.5mm) into the PHONES connector. The plug speakers are automatically disconnected in a headphone (not supplied). when you Language Code Enter the (See appropriate 16). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu REF NC 29 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 18). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor Coast IN India NU Niue IO British Indian Ocean NZ New Zealand US United States Uruguay Kingdom Outlying CI Ivory CK Cook Islands CL Chile Territory OM Oman UY CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Verde Anguilla Islands Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands 30 Republic Islands (French) State (British) (USA) Troubleshooting Check the following guide for the possible of cause a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD receiver ? No disc is inserted. ? Plug the power cord wall outlet. Insert a disc. (Check ? The TV is not set to receive DVD signal ? output. Select the on the TV ? The video cable is not connected ? securely. no is sound or ? Turn The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is poor. jacks the TV. input mode of the you can hear the sound from the DVD/CD receiver. ? securely. The DVD/CD receiver on audio receiver signal output. so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? screen. Connect the video cable into the The connected TV power is turned off. ? the TV on securely. ? a does not start display appropriate video input mode the picture from the DVD/ ? very low-level sound is heard. The that the DVD or, so CD receiver appears only into the lit.) picture. There is securely audio CD indicator in the DVD does not work. No service. connecting cable is damaged. dirty. Turn on the equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. or display is lit.) ? An disc is inserted. unplayable ? Insert a playable disc. the disc (Check type, colour system and Regional code.) ? The disc is placed upside down. ? Place the disc with the playback side down. ? The disc is not within the placed guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV ? ? screen. on the disc tray correctly guide. Clean the disc. Press the SETUP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? rating Wipe function Rating or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The dirty. and speakers components poorly. ? are ? connected ? The DVD/CD receiver is located too close to the TV. Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. 31 REF NC Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ? Tune in the station manually. ? Preset the stations (page 27). stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the ? of the DVD/CD receiver. The remote control is too far from the ? DVD/CD receiver. ? There is an obstacle in the Point the remote control at the remote sensor Use the remote control within about 23 ft path of the of the DVD/CD receiver. (7 m). ? Remove the obstacle. ? Replace remote control and the DVD/CD receiver. ? The batteries in the remote control flat. 32 are the batteries with new ones. Specification Power Power [Genral] Refer to back label Mass External dimensions [CD/VD] [Video] AM [MW] (W x H x D) kg 360 x 82 x Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL Designs 35°C, Operation More than 75 dB Video 1.0 V laser, wavelength 625/50, NTSC 525/60 status: Horizontal 650 REF NC nm 100 Hz to 18 kHz (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 65 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω 1.0 % output output 87.5 Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 1 108.0 MHz - 10.7 MHz 55 dB 150 522 - - (Mono) 10,000 Hz 1,611 kHz or 530 - 1,610 kHz 450 kHz Stereo mode 20W+20W(4Ωat1kHz,THD10%) Front: 20W + 20W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 20W Outputs S-VIDEO Surround*: 20W 20W + Subwoofer*: 40W (8Ω (4Ω at 30 kHz, THD 10 %) Hz, THD 10 %) at 1 MONITOR PHONES: [Suplied Acesori ] mm 5°C to 5% to 85% Satellite [Speakrs] 344 Temperature: Surround mode [Amplifer] 5.9 Operating conditions Operating humidity S-video [FM] [Tuer] Refer to back label supply consumption 1 Type Impedance Frequency Response Way 1 Speaker - 1 Way (1m) 20W H x D) 1 (LHS-D6235W) Speaker 8Ω 20,000 Hz 83 dB/W Rated x Passive Subwoofer 4Ω 130 Sound Pressure Level Input Power Max. Input Power Net Dimensions (W Net Weight (32 Ω, 22mW) Speaker (LHS-D6235T) 50 - 1,500 Hz 82 dB/W (1m) 40W 40W 80W 88x100x95mm 160x350x325mm 0.54 kg 4.12kg ?Speakers...........................6?Speakercables......................5 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 ?Videocable.........................1 and specifications are subject to change without notice. ">

Public link updated
The public link to your chat has been updated.
Advertisement