Advertisement
Advertisement
DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6230 (Main Unit: LH-D6230A, Speakers: LHS-D6230T, LHS-D6230W) CD-R/RW Before please up, operating or repairing this read this instruction booklet carefully and connecting product, completely. Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons. The exclamation mark within is intended to alert the user an equilateral triangle to the presence of and maintenance important operating instructions in the instructions (servicing) accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a similar unit. CAUTION: This DVD/CD receiver To ensure proper use employs of this a Laser System. product, please read this owner 's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). OTES ON COPYRIGHTS: Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radi- It is forbidden ation exposure. via cable, To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, apparatus should splashing) and no should be placed on or not be exposed to water objects filled with liquids, such the apparatus. law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is to others. You should retain this Model No. Serial No. 2 guide as a unique to this unit and not available record requested information here and permanent record of your purchase. ___________________________________ ___________________________________ Table of Contents Introduction 22-23 Operation with Audio CD and MP3 Disc .22 PlayinganAudioCDandMP3Disc. NotesonMP3Recordings.................22 . SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 . . . . . . . . . . . . Pause.............................23 Precautions.............................5 MovingtoanotherTrack...............23 RepeatTrack/All/Off...................23 NotesonDiscs..........................5 Search.............................23 PlayableDiscs...........................4 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . RepeatA-B.........................23 3DSurround........................23 . RemoteControl............................7 RearPanel................................8 Preparation .23 ChangingtheAudioChannel. OperationwithJPEGDisc...................24 ViewingaJPEGdisc.....................24 MovingtoanotherFile.................24 . . . . . . . . . . StillPicture.........................24 Connections............................9-13 AerialConnections........................9 Toflipthepicture.....................24 Torotatepicture......................24 .24 NotesonJPEGRecordings. ProgrammedPlayback.....................25 Programmed Playback with Audio CD ConnectingtoaTV......................10 .11 ConnectingtoExternalEquipment. SpeakerSystemConnection...............12 SpeakerPositioning......................13 BeforeOperation.......................14-18 Mini Glossary for Audio Stream & Surround .25 ProgrammedPlaybackwithVideoCD. SpeakerSetup............................26 Mode.................................14 AdditionalInformation.....................26 SoundMode...........................14 GeneralExplanation......................15 On-ScreenDisplay.......................15 InitialSettings........................16-18 Initial Settings General Operation. 16 Language..........................16 LastConditionMemory...................26 SystemSelect..........................26 OperationwithRadio....................27-28 Presettingtheradiostations................27 Listeningtotheradio.....................27 SleepTimerSetting......................28 Picture.............................16 Dimmer...............................28 SpeakerSetup.......................17 Mute.................................28 Others.............................17 UsingHeadphoneJack...................28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . andMP3Disc..........................25 . . . . . . ParentalControl......................18 Reference Operation .19-21 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............19 . . . . . . . GeneralFeatures........................19 MovingtoanotherTITLE...............19 19 Moving to another CHAPTER/TRACK . . . . . Search.............................19 Still Picture and Frame-by-Frame Playback . 20 LanguageCodeList.......................29 CountryCodeList.........................30 Troubleshooting........................31-32 Specification.............................33 About the symbols for instructions Indicates hazards likely to cause material damage. SlowMotion.........................20 itself Repeat............................20 RepeatA-B.........................20 Indicates special operating Indicates tips TimeSearch........................20 3DSurround........................20 Zoom..............................21 MarkerSearch.......................21 SpecialDVDFeatures....................21 TitleMenu..........................21 DiscMenu..........................21 CameraAngle.......................21 .21 ChangingtheAudioLanguage. .21 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................21 or other and hints for harm to the unit features of this unit. making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. 3 INTRODUC Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) addition, this unit can play a DVD-RW, DVD+RW, Kodak PICTURE CD and CD-R audio titles, MP3 or or CD-RW that contains JPEG files. Depending -- the conditions of the the CD-R/RW ment or itself, some cannot be -- on CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs irregularly shaped octagonal). It may result in or otes use on feature content enabling easily. (Video Sections of audio or an enabling CD and audio CD only) a picture or a musical piece CD. Each track is assigned on a a video CD track number, you to locate the track you want. the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not accompanying Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track otes -- or additional feature content, or music album. Each title is assigned a title reference number Video CD In (DVD only) CDs Scene (the On (e.g., heart-shaped malfunctions. video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the code of the DVD/CD receiver and DVDs This DVD/CD receiver is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVDs 3 indicates which type of player can play those discs. This unit can only play DVDs labelled "3"6 or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 are two types of video CDs: Video CDs equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. unit. Regional There PBC or of video CDs Types Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To use volatile such liquids, as the unit. Do not leave rubber near radio, or turn off the contact with the unit for leave marks Cleaning a use a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, Cleaning discs Fingerprints or and dust the disc on reduce sound with temperature as a clean quality. cloth. Wipe Before distort the can playing, picture clean the disc the disc from the centre out- wards. on a insecticide spray, plastic products in long period of time. They will or the surface. the unit Do not To clean the cabinet Use playing, the exterior surfaces clean keep Do not or discs soft, dry cloth. If the surfaces soft cloth benzene, or moistened with lightly solution. Do not use thinner, are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. " " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Disc get playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the on the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions following symbol is represented by the symbol. one to the disc of the DVD Video CDs with the PBC (playback control) function Handling Hold the disc on A section whose title has applicable only Notes symbol display or tape on the disc. Video CDs without the PBC (playback control) function will not CD MP3 JPEG Audio CDs. MP3 disc JPEG disc 5 INTRODUC Front Panel and Display Window STANDBY/ON OPEN/CLOSE button STANDBY indicator Lights red when the receiver is in Standby mode (off). DISPLAY PLAY button Window DISC VOLUME Tray controller PAUSE/STEP PAUSE/STEP/MONO/STEREO Remote sensor button TUNING STOP/CLEAR/MEMORY button PHONES (DOWN/UP)/ SKIP/SCAN buttons Indicates current Indicates current surround mode or connector chapter track number Indicates current audio stream Repeat playback Indicates current MEMORY indicator player function: Playback, Pause, mode indicators TUNED indicator etc. STEREO indicator Programmed playback active Indicates current title number MUTE indicator Total ANGLE active SLEEP indicator DVD inserted VCD Video CD inserted MP3 MP3 disc inserted 6 playing time/Elapsed time/ Frequency/Sleep time/Surround mode/Volume etc. indicators Remote Control OPEN/CLOSE button POWER button AUX button BAND button CD/DVD button MUTE button DIMMER button SLEEP button INTRODUC NUMBER buttons REPEAT A-B button REPEAT button PROGRAM button SOUND MODE button AUDIO button CLEAR button PRESET(+/-) buttons VOLUME (+/-) buttons SUBTITLE button ZOOM button RETURN button ENTER button ARROW buttons For use on a GUI in highlighting selection a DISPLAY button screen, TITLE and MENU screen. menu STOP button MENU button Use the MENU button to the included menu screen PAUSE/STEP button display on PLAY button DVD SKIP/SCAN video discs. two seconds for search function. Use the TITLE button to screen ) Press and hold button for about TITLE button the title / buttons SETUP button display ( ANGLE button included DVD video discs. on SLOW SCAN (Q / R) SEARCH button buttons MARKER button Remote Control Remote control Operation Range Point the remote control at the remote sensor and press remote Angle: sensor installation Remove the the buttons. Distance: About 23 ft battery battery of the remote (7 m) from the front of the AAA AAA sensor cover on the control, and insert R03 (size AAA) batteries aligned correctly. with rear two and About 30° in each direction in front of the remote Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Rear Panel AM Antenna Connectors FM 300Ω Antenna Connector AUXILIARY INPUT Connectors SPEAKER Connectors RR LL 300 S-VIDEO OUT Connector POWER CORD MONITOR OUT Connector Do not touch the inner panel. Electrostatic damage to the unit. 8 pins of the jacks on the rear discharge may cause permanent Connections Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial PREATION (supplied) (supplied) RR 300 LL otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM wire aerial, keep it to as horizontal as possible. 9 Connections Connecting (Continued) to a TV Rear of TV S-VIDEO INPUT VIDEO INPUT AUDIO INPUT L R L V S RR Make the of the following connections, depending capabilities of your existing equipment. one 300 LL on Video connection Connect the MONITOR OUT receiver to the VIDEO IN ips Depending cable jack jack on the DVD/CD on the TV using the video (V). your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections S-Video connection described below. Connect the S-VIDEO OUT Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the er on to the S-VIDEO IN cable jack jack on on the DVD/CD receiv- the TV using the S-Video (S). best connections. Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly input your TV. Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. 10 on otes The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. When you connect the DVD/CD receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. Connections Connecting (Continued) to External Equipment VCR Connections Panel RR LD* PREATION player, etc) VIDEO OUTPUT AUDIO OUTPUT L (or R 300 LL Connection Connect the AUX IN er to the AUDIO er, etc using (L/R) jacks on the DVD/CD receivOUT (L/R) jacks on the VCR, LD play- the audio cables. ip Press AUX on the remote control to select input to these jacks. AUX appears on the Display Window. 11 Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible supplied speaker surround cords. sound, adjust the speaker parameters (volume, distance, etc.). Center Speaker Front Front Speaker (Right) Speaker (Left) RR 300 LL Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, Do not remove the front cover of supplied speaker. 12 adjust the volume carefully to avoid excessive output on the speakers. Connections Speaker Positioning In the of normal case position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the for speakers equal distance. And by hearing position set up the interval between Centre The ? play speaker centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room - 90 size, if the audience is cm than the listener's near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Speaker (Left) Speaker Front Speaker (Right) Rear Rear Speaker (Left) Speaker (Right) Speaker Positioning Example 13 PREATION Before Mini Operation Glossary for Audio Stream & (2CH STEREO) the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources completely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. Outputs Surround mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. means BYPASS Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Press SOUND MODE you want appears in The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. "" When PCM indicator is display "" which carries the movie or Dolby Digital mark. This mode provides → PL2 MOVIE the effect being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Logic → PL2 MATRIX → BYPASS When DVD is inserted. You change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. can →→→ II creates five full-bandwidth from two-channel PL2 MUSIC Each time you press AUDIO button, the sound mode of DVD is changed as the following order; (II) Pro → → 2 channel of Dolby in the Each time you press SOUND MODE button, the sound mode is changed in the following order; 3D SURROUND playing only displayed window: PRO LOGIC Use this mode when repeatedly until the sound mode the display window as below. sources. output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. For your reference MOVIE mode: ? The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. The DVD/CD Receiver memorizes the last mode settings ? for each individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled with the logo. DTS Digital Surround discs are marked with DTS. source - MUSIC mode: The Music mode is for and provides a with any stereo music recordings, wide and deep sound space. The Music mode use includes controls that allow the sound to be tailored to individual listening tastes. - - MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono. 3D SURROUND This unit produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel can audio from a encoded with 14 home theatre. This feature works with DVD discs Dolby Pro Logic and Dolby Digital audio tracks. otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). Sound Mode is not applicable when headphone is used. Before General This manual Operation (Continued) Explanation 3 operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives General screen. playback 1 2 is not available on status Temporary can be be TRACK Repeat Track ALL Repeat All Tracks Repeat A-B Repeat Off AB OFF display operation Press DISPLAY Resume during playback. Press 3/4 to select an The selected item will be For some setting functions, setting. Title Repeat Chapter menu. item. be also be used for number). CHAPT the TV on title an Feedback Field Icons Repeat TITLE the disc. displayed changed on the can (e.g., can of setting press ENTER to execute the Display Some items On-screen or numbers the change The number buttons basic instructions for the DVD/CD receiver On-Screen Press 1/2 to Action play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available item. otes highlighted. Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language and Digital Audio Output mode Subtitle language Angle 5.1 CH ABC OFF 1/1 Sound VCD2.0 D BYPASS titles, and skips to the desired title number. Shows the current chapters, and number and total number of chapter skips to the desired chapter Shows the searches elapsed playing time, and the point directly from the elapsed number. time. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and the angle number and total changes the angle number. mode, number of and setting. Numbers, ENTER 1/2,or AUDIO 1/2,or ANGLE 1/2,or SOUND MODE VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time 0:20:09 Audio Channel and PBC On Shows the mode, BYPASS changes and number, total number of tracks skips to the desired track number. elapsed playing Shows the audio STER. Sound 1/2,or Numbers, ENTER, SKIP SUBTILE Shows the current sound changes 1/2,or Numbers, ENTER 1/2,or setting. Shows the current angles, and Selection Method channel, the setting. 1 /2,or Numbers, ENTER (Display only) and -- 1 the audio channel. Shows the current sound changes time Selection Method /2,or AUDIO mode, and 1 /2,or SOUND MODE 15 PREATION Before Initial You can Operation (Continued) Language Settings set your Personal Preferences own on the DVD/CD receiver. Disc Language Select DVD for the disc's language a Menu, Audio, and Subtitle. Initial General Settings Operation 1 Press SETUP. The setup menu appears. original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language Original : The code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Spanish Code Italian Aspect Menu Disc Subtitle English Disc Menu French Rating German TV Polish Spanish Code Italian Aspect Menu Hungarian 5.1 Original Country Chinese Language Disc Audio Chinese Language Polish Other------------ Speaker Setup Hungarian Others 5.1 Other------------ Speaker Setup Others 2 Press 3/4 to select the desired item. The screen selected will show the current item, as well as setting for the alternate setting(s). Menu Select selected, press 2, then 3/4 to select the desired setting. 3 While the desired item is 4 you Language a see 5 setup SETUP, RETURN, menu. Disc Audio Chinese Disc Subtitle English This is the menu Disc Menu Rating Country TV or setup when you press SETUP. Press ENTER to confirm your selection. Some items require additional steps. Press for the language Aspect Menu PLAY to exit the Code Language menu. 5.1 Speaker Setup Others Picture TV Aspect DVD 4:3 Letterbox: Select when nected. Displays a standard 4:3 TV is theatrical above and below the images picture. 4:3 Panscan: Select when a with masking con- bars conventional TV set is connected. The video material formatted in the Pan & Scan style picture are is played cut off). back in that 16:9 Wide: Select when a 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Country TV Aspect Menu 5.1 Code Language Speaker Setup Others sides of the 16:9 wide TV is connected. Disc Audio Rating 16 style (Both Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You Play DVD set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) can ed. If Auto Play will search mode is set to a title that back the title play On: Auto Off: Auto Play Play On, this DVD/CD receiver playback time automatically. is longest and then function is activated. function is not activated. Disc Audio Disc Subtitle R Disc Menu ote Front L Rating Country TV Code Volume Play function may not work for some DVDs. Small Distance Language The Auto 0 dB Size Aspect Menu R 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, Vocal, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC On Rating Auto Country TV Off Code Aspect Menu 5.1 Play Language Speaker Setup Others Dynamic Range With the DVD Control (DRC) program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set format, you can hear a DRC to On for this effect. Vocal Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. 17 PREATION Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies complete the disc. These scenes on disc or scenes are Code Code (See "Country are TV Disc Menu 6 Menu 5 Rating 1 4 Code 3 Aspect Unlock Speaker Setup Select the Language Speaker Setup Others using Country 2 step 3 4 5 6 selection, Code is 1 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. "Rating" Shift the is selected, press 2. second personal 4-digit security password. then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already registered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passto create 3 of "Rating" If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 Select rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Ratings 1 to 8: Some discs contain scenes played. Higher rated unless an alternative scenes scene is available The alternative must have the lower If will not be same on rating 5 ote This function may not work for 18 some DVDs. button and select the 3/4 buttons. Confirmation of the the code is 4-digit password changed (see "Changing is necessary when the 4-digit code" below.). Changing the 1 Follow 2 Enter the old 3 Select Steps 4-digit 1-2 as code shown above to the left (Rating). code, then press ENTER. Change using 3/4 buttons then press ENTER. 4 Enter the 5 Enter exactly the same fy by pressing ENTER. 6 Press SETUP to exit the new then press ENTER. code a second time and veri- 4-digit code, menu. If you 4-digit your code or a 1 Press SETUP to 2 Use the Number buttons to enter the selection, If you forget the disc. played no Press ENTER to confirm your rating then press SETUP to exit the menu. the 3/4 buttons. your password, to clear the current password, follow the procedure below. suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. using not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be left. ote a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. using 2 character using cursor on Press ENTER to confirm your country code then press SETUP to exit the menu. a word, then press ENTER. on selected, press 2. Select the first character Select the 3/4 buttons menu. Follow Change Code Country setup While 2 Language 1 5.1 Aspect Others 7 Menu TH Code Country 8 Disc Subtitle TV Code Set Rating 5.1 Country to the list Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were List", page 30.). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated whose standards country/area a used to rate the DVD video to from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are DVD forget display the setup menu. 6-digit number "210499". The 3 4-digit password Enter a new (Rating). code is cleared. as shown above to the left Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD VCD2.0 the TV and select the video General Features ote VCD1.1 input Unless stated source con- nected to the DVD/CD receiver. Audio the 1 system: Turn input source on the audio system and select connected to the DVD/CD receiver. Press OPEN/CLOSE to open the disc 2 Load your chosen disc in the playback side facing down. 3 Press OPEN/CLOSE to close the READING appears starts tray. When tray, with the The or displayed loading a Press TITLE or title/chapter you start playback. MENU to return to the menu screen. VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting the a title title, then press ENTER. 1/3 disc has than one than more track, you one chapter can move or a to another follows: as briefly during playback to return to the beginning of the current chapter/track or to select the next chapter/track. Press SKIP/SCAN . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number operating procedures for depending on the disc. menu using the numbered buttons to select the chapter/track, press 1 then press ENTER. (0-9) or ote For menu screen. setup. See page otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized -- a 1 /12 on a more two-digit numbers, press (0-9)in rapid succession. Search "Parental title number. a and the exact You also may set PBC to Off under 17. -- to select to another CHAPTER/TRACK chapter/track 2 menu screen. may differ Follow the instructions on the each using to can move Press SKIP/SCAN .or > Use the 1 234 buttons to select the to title, you one follows: VCD1.1 disc has may be displayed first after Video CD which offers a menu. view, then press ENTER than appear DVD want to (0-9) Moving menu screen DVD as more Press 1 2 to select When is DVD DISPLAY, then press the appropriate number button tray. DVD a menu screen disc has another title instead. If a Press might menu to another TITLE 1/3 the TV screen, and playback If playback does not start, press PLAY. In some cases, the disc use the remote control. Some features may also be available on the Setup menu. Moving on automatically. otherwise, all operations described Control", (see page 18). region code. on DVDs may have a Your receiver will not play VCD2.0 VCD1.1 1 Press and hold SKIP/SCAN . two seconds or > for about during playback. The receiver will now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the discs that have code different from your receiver. The this receiver is 3 (three). DVD the numbered buttons region region code a for required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To return to normal play, press PLAY. 19 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD A* VCD1.1 To during playback. The DVD/CD receiver will 2 You (continued) Frame-by-frame playback 1 Press PAUSE/STEP now go into PAUSE mode. advance the repeat play, VCD2.0 1 Press SLOW SCAN m " A* " briefly appears on briefly begins (" Time Search the TV starting point. screen. at your chosen end point. the TV screen, and the repeat again on " appears the display window). 0:20:09 DVD -:--:-- The Time Search function allows you to start any chosen time on the disc. during playback. The DVD/CD receiver will enter SLOW mode. 2UsetheSLOWSCANmorMtoselectthe 1 Press DISPLAY required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). To return to normal play, press PLAY. display appears ote The during playback. the on on-screen elapsed playing time of the current disc. 2 Within 10 seconds, press 3/4 on-screen to select the Time display. The "-:--:--" appears in the Time Search box. Slow motion playback in is not reverse applicable for 3 Within 10 Video CD. the seconds, required Repeat CHAPT DVD VCD2.0 TITLE TRACK DVD Video Discs use the number buttons to enter start time. Enter seconds from left to right hours, minutes, and in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD1.1 ALL OFF 4 Within 10 seconds, press ENTER press PLAY to or confirm the start time. Repeat Chapter/Title/Off - Playback repeat the currently playing chapter, press an invalid starts from the selected time time, playback the disc. If you enter will continue from the current point. on REPEAT. The 2 To Repeat Chapter icon appears on the TV 3D Surround screen. repeat the title currently playing, press REPEAT VCD2.0 DVD VCD1.1 a BYPASS 3D SUR second time. The Repeat 3 To exit The Title icon appears Repeat mode, Repeat on the TV screen. press REPEAT Off icon appears on the TV a This unit third time. Video CDs repeat The 2 To - Repeat the track Repeat press REPEAT. the TV a 3 To exit The All icon appears Repeat mode, Repeat on the TV screen. press REPEAT Off icon appears on the TV a third time. screen. ote On a setup 20 Video CD with menu to use PBC, you the Repeat must set PBC to Off effect, which playback from two speakers, instead of the speakers normally required to listen to a home theater five or system. 1 Press SOUND MODE to select "3D SUR" 2 To turn off the 3D Surround MODE second time. Repeat 3D Surround during playback. screen. repeat the disc currently playing, press REPEAT The a multi-channel audio from currently playing, on produce conventional stereo screen. Track/All/Off Track icon appears can simulates multi-channel audio more 1 To at playing screen. The Time Search box shows the Search icon in the 1 To title: a 3 To cancel the sequence, press REPEAT A-B. VCD1.1 M or VCD1.1 OFF "AB" appears press PLAY. DVD VCD2.0 sequence in a sequence Slow Motion 3 AB 2 Press REPEAT A-B control. 3 To return to normal DVD 1 Press REPEAT A-B at your chosen picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote can A-B Repeat on function. See page 17. the again effect, press SOUND to select "BYPASS". with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the resume normal playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. ote The Zoom function may not work for some 2 The DVDs. Marker Search VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle 3 To menu menu will appear may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on again. VCD1.1 Disc Menu MARKER SEARCH 1/9 DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press MENU. You can nine points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a disc playback, press MARKER when reaches the spot that you want to During playback Camera The Marker icon will appear on the TV briefly. screen 1 to enter up to nine Marker Repeat step points on a disc. To Recall DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene a Angle If the disc contains memorize. 2 The disc to angle appears the TV on a screen. 1 ENG 1 disc During playback, The MARKER SEARCH 2 Within 10 press SEARCH. menu will appear seconds, press 1/2 buttons to select a or use on the screen. the number Marker number that you want to recall. will start from the Marked 4 To remove scene. ferent audio 1 a During the MARKER SEARCH menu, press ferent audio playback, The MARKER SEARCH 2 will appear on the screen. VCD2.0 DVD ABC a dif- VCD1.1 repeatedly during playback to hear channel (STER., LEFT or RIGHT). different subtitle erase. a dif- 1 ENG repeatedly during playback languages. to see the ote Press CLEAR. If The Marker number will be erased from the list. 4 to hear Press SUBTITLE press SEARCH. menu the Audio Channel 5.1 CH Press 1/2 to select the Marker number that you want to 3 Subtitles Marked Scene disc repeatedly during playback language or audio track. Press AUDIO SEARCH. To clear Language Press AUDIO Changing 3 Press ENTER. Playback Changing the Audio D DVD Repeat steps 2 and 3 to erase appears, the feature is not available on the disc. additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 21 OPERATION with Audio CD and MP3 Disc Operation Playing an Audio CD and CD Notes on can CD-R CD-ROM, Before or play MPEG1 audio CD-RW discs. read the notes playing recordings, Recordings on right. on files that have MP3 1 disc and close the CD; Audio CD menu appears on the TV screen go to step 4. MP3 disc; The MP3-JPEG choice menu appears on the TV screen. Go to step 2 compatibility limited follows: 1. 2. 4. JPEG Press 3/4 to select the MP3 then press ENTER or PLAY. menu appears Press RETURN to move the TV on screen. to the MP3-JPEG choice menu. 5. A single TRACK 4.mp3 6. TRACK 5.mp3 TRACK 6.mp3 Clear All TRACK 8.mp3 00:00 a folder, and ENTER or a PLAY. track then press PLAY the current track's or elapsed playing time will appear on the display window and Playback will stop at the end of the disc. Audio CD menu. to the next page. move Press MENU to move to the previous MP3 menu Program CD Program MP3 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK04 TRACK 3.mp3 TRACK 5.mp3 TRACK 6.mp3 Clear All TRACK08 STER. 0: 56: 18 BYPASS TRACK 7.mp3 Clear All TRACK 8.mp3 00:00 1 OFF ip use in 5 22 file list and want to return to the Folder the 3/4 to return to the To a and highlight previous menu screen. stop playback track, it can- playback MP3 use a new File names at any other should be named incorporate ".mp3" using 8 letters or less extension 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than This DVD/CD receiver requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There many different types of recordable disc formats (including CD-R containing are MP3 files). That require certain pre-existing (see above) to insure compatible playback. conditions press ENTER to time, press STOP. permission is in order to download MP3 files and music from the Internet. Our company has no right to grant such permission. Permission should always be TRACK 4.mp3 TRACK07 MP3 file in the 1st Customers should also note that menu TRACK02 TRACK06 MP3 files in the first page. TRACK01 TRACK05 no requires MP3 files. If you wish to format all the data in the disc or required list, session disc system. 650. ENTER. are ISO9660 file e.g. "********.MP3". OFF 1 3 A list of files in the folder appears. If you an and must TRACK 7.mp3 Press TITLE to with this receiver is one. TRACK 3.mp3 Playback starts. During playback, ".mp3". playback files, TRACK 2.mp3 Press 3/4 to select MP3 file that - not Program Press 3/4 to select an Sampling Frequency / only at 44.1kHz Bit rate / within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD Creator", which creates TRACK 1.mp3 4 as track. If there is MP3 not read file extension other than a MP3 Disc 3. MP3 The MP3 can tray. Audio 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". The DVD/CD receiver has a Recordings An MP3 file is audio data MP3 formatted record- MP3 Insert MP3 on About MP3 MP3 The DVD/CD receiver ings MP3 Disc sought from the copyright owner. with Audio and MP3 Disc Operation CD Pause 3D Surround MP3 1 Press PAUSE/STEP during playback. 2 To return to ENTER Moving In > 3D Surround simulates multi-channel audio effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- a home theater briefly step back to or system. OPERATION during 2 To turn off the 3D Surround to MODE again effect, press SOUND to select "BYPASS". track. CD, the track number to go using directly track, to any the numbered buttons enter (0-9) during playback. 1 To a playback. to go to the next track. of audio Repeat produce can channel audio from MP3 briefly during beginning of the current or to return to the previous case or CD 1 Press SOUND MODE to select "3D SUR" Press SKIP/SCAN . twice the CD to another Track playback or This unit press PLAY, PAUSE/STEP playback, again. Press SKIP/SCAN . track (Continued) Changing CD CD Press AUDIO different Track/All/Off the Audio Channel repeatedly during playback to hear a audio channel (STER., LEFT, or RIGHT). MP3 repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on menu screen. 2 To repeat all tracks disc, press REPEAT on a a sec- ond time. The Repeat 3 To cancel The icon and "ALL" appears Search icon and "OFF" appears CD two seconds during playback. The now will the on third time. a menu screen. MP3 1 Press and hold SKIP/SCAN . player menu screen. press REPEAT Repeat mode, Repeat the on > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . > or repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3 To return to Repeat To 1 repeat A-B CD a sequence. disc playback, press REPEAT A-B at your cho- During sen starting point. The Repeat icon and "A 2 Press REPEAT A-B The press PLAY. playback, Repeat * " appears the on menu screen. at your chosen end point. icon and "AB" appears on the menu screen, and the sequence again begins to play repeatedly. 3 To exit the sequence and return to normal REPEAT A-B again. The Repeat icon and "OFF" appears on the play, press menu screen. 23 Operation Viewing a with JPEG Disc JPEG disc Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a to another File Moving JPEG can disc and close the The MP3-JPEG choice menu appears on while once to advance to the next file picture or to the viewing a previous file. Still Picture 1 Press PAUSE/STEP tray. > or during The DVD/CD receiver will slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. the TV screen. now MP3 To JPEG flip the picture Press 3/4 while 2 horizontally Press 3/4 to select the JPEG then press ENTER. The JPEG menu on appears the TV or To rotate screen. Press 1/2 JPEG Folder2 to picture a the flip picture picture during showing clockwise picture Folder1 showing vertically. or a picture to rotate the counterclockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide 3 Press 3/4 to select a Speed upon the size and number of the JPEG files, it could take a long time for the DVD/CD receiver to read the disc's contents. If you don't see an on- Depending Off folder, and press ENTER or PLAY. display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen A list of files in the folder appears. Press RETURN to move to the MP3-JPEG choice menu. --- Total number of files and folders list, are " in a file list and want to return to the Folder the 34 buttons use " on the remote to highlight Some disc may be incompatible due to different recording format or condition of disc. When you are using software such as Creator" to burn the jpeg files into the and press ENTER to return to the previous menu screen. that all the selected files have the 4 If you want to view a particular file, press 3/4 to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts. During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to JPEG move to move to to the next page. Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed Press MENU to 5/32 Off move to the 1024X768 previous Picture5.jpg page. ip There are three Slide Speed options: Fast, Off. Press 1/2 to highlight the Slide 3/4 to select the option you want to viewing Normal, Slow, and then press use, and press ENTER. Speed To stop viewing The JPEG 24 when copying menu at any other appears. time, press STOP. into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have rename File them names ".jpe" or ".jpeg" extensions, please as ".jpg" files. without be read by files shown are explorer. Folder1 Picture1.jpg 5 the disc should be less than 650. ip If you on ".jpg" extension will not be able to this DVD/CD receiver. Even as JPEG image though the files in windows Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 ote function enables you to store your favourite tracks from any disc in the player memory. Program Program during playback or in the Program Edit mode. mode to enter the E The mark will appear to the right of the word the right side of the menu screen. on On a Video CD with setup menu to the use must set PBC to Off PBC, you on the function. See page 17. Program contain 30 tracks. can Press PROGRAM 1 with Video CD Programmed Playback and MP3 Disc The MP3 stop Program Insert Video CD and close the 1 2 Press PROGRAM while The VCD Program menu OPERATION tray. playback is stopped. will appear. Program VCD E TRACK 1 TRACK 2 ote TRACK 3 Press PROGRAM to exit the Program Edit TRACK 4 mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 Program to place the list. ote Repeat step 2 Program list. 3 to place on the Press E Program MP3 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 3 TRACK 2.mp3 TRACK 4.mp3 TRACK 3.mp3 TRACK 5.mp3 TRACK 6 TRACK 6.mp3 TRACK 7 TRACK 7.mp3 Clear All STER. 00:00 4 Clear All TRACK 8.mp3 BYPASS Follow 2-6 of steps OFF 3 To MP3 menu programmed track you selected last is highlighted on the program list. 5 playing. normal disappears Press PLAY 6 Playback begins playback, window. Tracks repeat all tracks REPEAT a the program second time. Repeat icon and "ALL" appears the TV the TV on press REPEAT icon and "OFF" appears screen. list, press on Repeat mode, Repeat on on screen. a the TV third time. screen. ENTER to start. Playback stops after have played once. resume display icon and "TRACK" appears Repeat The in the order in which you programmed the tracks and "PROG." appears on the menu screen. 7 The To cancel move or in the repeat the track currently playing, press REPEAT. The to the next page. Press MENU to move to the previous page. To To To Press 3/4 to select the track you want to start Press TITLE to left. menu Press 2. The on with playback from programmed playback, press PROGRAM. resume Repeat Programmed 4 Program "Programmed Playback Audio CD and MP3 disc" "PROG." indicator Audio CD PLAY to exit the TRACK 3.mp3 TRACK 4.mp3 TRACK 5 0: 56: 18 or E TRACK 8.mp3 TRACK 1 TRACK 8 RETURN, PROGRAM menu. Program CD additional tracks all of the tracks normal select a on the Program list Erasing a Track from 1 Press PROGRAM MP3 disc only) or Program List during playback (Audio CD and stop to enter the Program Edit mode. playback from track of CD programmed (or MP3) list and then press ENTER or PLAY. "PROG." indicator disappears in the display window. E The mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing 1 Follow List" as the whole steps 1-2 of Program "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear The Program complete Program The programs are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. 25 Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD receiver memorizes the Disc Subtitle R Disc Menu Country Code Volume Menu 0 dB Size Aspect switch off the Small Distance Language settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or Front L Rating TV R user tings memorized, ly recalled. 1 ft Test If you load the latest stop player. a disc that has its set- position is automatical- Return 5.1 Speaker Setup otes Others -- -- 1 Select "5.1 Speaker Setup" using buttons the 2 While "5.1 on setup the 3/4 is System Press 2 buttons to select the desired Select speaker. 341 2 buttons. appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP on the front panel for than 5 seconds to be able to select or that you want to speaker adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), Subwoofer)) speaker settings are prohibited by Digital licensing agreement. the AUTO: PAL: level of the selected ~ Size speaker settings settings. the are fixed, you cannot change Distance If you connected speakers to your DVD/CD receiver setting the Distance lets the speakers know how far the , sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press ENTER to test the Adjust signals of each the volume to match the volume memorized in the Front Left Rear Left (L) (L) speaker. of test signals system. → Front → Rear Right (R) Right (R) → Centre → Subwoofer → Return Press ENTER to return to the 26 previous menu. not be Select when DVD/CD receiver is connected system TV. Select when DVD/CD receiver is connected Select when DVD/CD receiver is connected with PAL-TV. Since the not coincide with the with NTSC-TV. Dolby Volume adjust the output speaker. (-6dB +6dB) system does displayed. NTSC: Certain system system of your TV, normal colour picture may with Multi ote a AUTO). When the selected Press 1 / 2 to com- You must select the more selection a disc if Select (PAL, NTSC, Speaker a selected, press 2 button. 3 Adjust options by using 4 time. you switch off the DVD/CD receiver before mencing to play it. menu. Speaker Setup" Settings are stored in memory for use any This player does not memorize settings of with Radio Operation Presetting You can ing, make that you have turned down the volume. Press BAND 1 on the remote control until FM AM appears in the 2 3 display or window. And then every time you press AM changes alternately. or panel for about two seconds frequency indication starts to change, 2 until the when the DVD/CD Receiver tunes in appear in the display stereo (for play FM appears in the dis- or window. Press PRESET +/- one 3 a program) window. to select the pre- repeatedly set station you want. Each time you press the button, the DVD receiver tunes in then release. station. "TUNED" and "STEREO" 1 Press BAND until AM The last received station is tuned in. on the front Scanning stops Preset radio stations in the DVD/CD receiver's memory first (see "Presetting radio stations" on the left). BAND, FM and Press and hold TUNING to the radio Listening 30 stations for FM and AM. Before tun- preset sure the radio stations preset station at time. a Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To turn off the radio Press POWER to turn the DVD/CD receiver off another function mode ote "TUNED" appears when the only signal To listen to 4 A on the front panel. For manual the front on 5 panel or to select the on the front preset number you or For automatic want. 6 7 on the front panel again. 3 to 6 to store other stations. To select You station with a Press TUNING a weak to tune in the station signal repeatedly or in step 3 manually. To clear all the stored stations Press and hold MEMORY for about two seconds and "CLEAR ALL" is then press appeared in the display window and MEMORY again, the stations are cleared. If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and in step 2. tuning, or press and hold TUNING for about two seconds on the front change preset radio station directly a can use to select To tune in tuning panel. The station is stored. Repeat steps automatic tuning, press TUNING panel repeatedly. or Press MEMORY AUX). non-preset radio stations Use manual preset number will flash in the display window. Press TUNING or select is FM and STEREO. Press MEMORY (CD/DVD or the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 a (within 3 seconds). For your reference If an FM program is noisy Press MONO/STEREO. "STEREO" on the front panel so that display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo disappears in the effect. To improve reception Reorient the supplied antennas. to normal mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 OPERATION with Radio Operation (Continued) Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a specified time. Press SLEEP to set the desired The SLEEP indicator and play 2 Dimmer Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The display 28 change the brightness of the display window on the front panel during in power-on status. Press the DIMMER repeatedly. Mute Press MUTE to mute your unit. You can mute your unit in order, for the telephone, window. remaining time appears in the to example, "MUTE" indicator flashes in the answer display window. Using Headphone ote You This function will Connect a stereo Jack headphone plug ( 3.5mm) into the PHONES connector. The speakers are automatically disconnected plug in a headphone (not supplied). when you Language Code List Enter the appropriate (See page 16). code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu REF NC 29 Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 18). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM SV El Salvador BB Barbados GI Gibraltar MN Myanmar Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF French Southern BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE PM Saint Pierre and VN Vietnam CY Cyprus KG Kenya Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands DE 30 Barbuda Verde Republic Georgia & S. Sandwich (USA) Islands Anguilla Mayen Islands Republic Principe Territories (French) Tobago Kingdom Minor Outlying Islands Miquelon (French) City State Grenadines Islands Islands (British) (USA) Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output. Select the on the TV appropriate video input mode so the picture from the DVD/ CD receiver appears ? The video cable is not connected ? securely. There is no sound or ? Turn ? The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is poor. The DVD/CD receiver does not start the TV. ? input mode of the so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? Insert ? jacks you can hear the sound from the DVD/CD receiver. securely. The on audio receiver signal output. ? screen. securely. The connected TV power is turned off. a the TV on Connect the video cable into the ? very low-level sound is heard. only into the that the DVD or, audio CD indicator in the DVD display is a disc. securely connecting cable is damaged. dirty. Turn on the equipment connected with the audio cable. a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. or display is lit.) ? An disc is inserted. unplayable ? Insert a (Check the disc system and Regional code.) playable type, colour ? The disc is placed upside down. ? disc. Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV screen. on the disc tray correctly guide. ? Clean the disc. ? Press the SETUP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? rating Wipe function Rating or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The ? dirty. and speakers components connected poorly. are The DVD/CD receiver is located too close to the TV. ? Clean the disc. ? Connect the speakers and components securely. ? Move your TV away from the audio components. 31 REF NC Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ? Tune in the station manually. ? Preset the stations (page 27). ? Point the remote control at the remote in with automatic No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the of the DVD/CD receiver. The remote control is too far from the sensor ? DVD/CD receiver. ? There is an obstacle in the Use the remote control within about 23 ft path of the of the DVD/CD receiver. (7 m). ? Remove the obstacle. ? Replace remote control and the DVD/CD receiver. ? The batteries in the remote control flat. 32 are the batteries with new ones. Specification Power Power [Genral] Refer to back label Mass External dimensions [CD/VD] [Video] AM [MW] x H x D) 360 x 82 x Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL Designs 5°C to 35°C, Operation status: Horizontal laser, wavelength 650 REF NC nm 100 Hz to 18 kHz More than 75 dB (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 65 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω 1.0 % output output 87.5 Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 1 108.0 MHz - 10.7 MHz 55 dB 150 522 - - (Mono) 10,000 Hz 1,611 kHz or 530 - 1,610 kHz 450 kHz Stereo mode 20W+20W(4Ωat1kHz,THD10%) Front: 20W + 20W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 20W Outputs S-VIDEO Surround*: 20W 20W + Subwoofer*: 40W (8Ω (4Ω at 30 at 1 kHz, THD Hz, THD 10 10 %) %) MONITOR Satellite [Suplied Acesori ] mm 625/50, NTSC 525/60 PHONES: [Speakrs] 344 5% to 85% Surround mode [Amplifer] kg Temperature: S-video [FM] (W 5.9 Operating conditions Operating humidity Video [Tuer] Refer to back label supply consumption 1 Type Impedance Frequency Response Speaker (LHS-D6230T) Way 130 Speaker - 1 Way H x D) 1 (LHS-D6230W) Speaker 8Ω 20,000 Hz 83 dB/W Rated x 1 Passive Subwoofer 4Ω Sound Pressure Level Input Power Max. Input Power Net Dimensions (W Net Weight (32 Ω, 22mW) (1m) 50 - 1,500 Hz 82 dB/W (1m) 20W 40W 40W 80W 88x100x95mm 160x350x325mm 0.54 kg 4.12kg ?Speakers...........................6?Speakercables......................5 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 ?Videocable.........................1 and specifications are subject to change without notice. 33 P/N: 3828R-D030T ">

Public link updated
The public link to your chat has been updated.
Advertisement