advertisement
▼
Scroll to page 2
of 28
Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached the back cover and quote this information to your dealer when you require service. Model number : Serial number : P/NO : 38289U0485A on (MC059B, 124D TX) a Contents Installation 3 Location and function of controls Remote control handset Battery installation / Front panel 4 Basic 7 operation On and off / Programme selection Volume adjustment / Quick view Mute function On On screen language selection (option) 8 screen menus Menu selection Setting up TV stations 9 Auto programme tuning Manual programme tuning Programme edit Favourite programme Calling the programme table Picture adjustment PSM (Picture Status Memory) CSM (Colour Status Memory) Picture adjustment / Eye (option) Turbo picture selection (option) 15 Sound adjustment (option) SSM (Sound Status Memory) / Sound 17 adjustment X-WAVE (Wireless Sound) (option) Turbo sound selection (option) Sound output selection (option) Stereo/Dual reception (option) NICAM reception (option) Time setting Setting the Setting the 20 clock On/Off timer Auto off Other functions TV and AV modes / Auto AV switching Child lock / Blue back (option) Games (option) / Sleep timer 21 (option) Connection of external equipment Aerial socket Audio/Video in/out sockets (option) Euro scart socket (option) S-video/Audio in sockets (S-AV) (option) Component in sockets (option) Headphone socket (option) Troubleshooting 2 check list 24 27 Installation Power This set supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. operates on an AC mains Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not cause of the set, this may place anything containing liquid on top a fire or could give an electric shock. Service Never remove the back high voltage properly, unplug it very of the set this expose you to and other hazards. If the set does not operate cover as can and call your dealer. Aerial Connect the aerial cable to the socket marked +75 Ω cover. For the best reception an on the back outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. 3 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel of the set. adjusted with the buttons on the front Remote control handset Before you use the remote control teries. See the next page. 1. POWER MUTE POWER switches the set handset, please install the bat- from standby or off to NUMBER BUTTONS switches the set on from standby or directly on standby. 1 123 2. select a number. 456 2 3. 789 MENU (or INDEX) selects a menu. selects MENU/INDEX 0 TV/AV 4. 4 EYE/ 5 on or off. LIST SSM/ () (Programme Up/Down) automatically. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings. 6 SLEEP programmes OK 7 FAVOURITE accepts your selection / 8 PICTURE TURBO/ or displays the current mode. SOUND 6. 9 4 (option) () / scans () Q.VIEW PSM TELETEXT selects a programme or a menu item. switches the set on from standby. VOL OK PR (only () 5. VOL EYE/* switches the eye function I/II/ PR index page in the teletext mode models). (option) 3 TV an Q.VIEW returns to the previously viewed programme. 7. PSM (Picture Status recalls your preferred 8. FAVOURITE selects a favorite programme. 9. TURBO PICTURE / SOUND BUTTON selects Turbo picture and sound. Memory) picture setting. (option) Location and function of controls 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set from on standby. 12. I/II/* (option) selects the language during selects the sound dual language broadcast. (option) output. 13. LIST POWER displays MUTE the programme table. 10 1 2 3 4 5 6 7 8 9 MENU/INDEX 0 TV/AV 14. SLEEP sets the 15. SSM/* recalls sleep timer. (Sound Status Memory) (option) your preferred sound setting. 16. SURROUND (º/*) (option) 11 TV selects surround sound. 12 * : EYE/ No function COLOURED BUTTONS TELETEXT models) or : These buttons are used for teletext (only VOL I/II/ PR programme edit. installation + LIST 13 powered by two AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by polarity symbols ( () Q.VIEW The remote control handset is the VOL OK PR Battery () and - ) marked inside the compartment. PSM SSM/ SLEEP FAVOURITE / PICTURE 14 15 16 SOUND TURBO/ Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. 5 Location and function of controls Front AV2 6 panel 21FX4 series 21FB3 series VIDEOL/MN ON/OFF MENU OK VOL PR VIDEO L/MONO AUDIO R AV VIDEO AUDIO AV3 AUDIO R 1234 7 5 8 1234 5 6 7 6 7 17/21FB7 series 21FD1 series 7 MENU OK PR VOL AUDIO 6 VIDEO 1234 5 123 4 5 AV 21FB5 series 21FX5 series 7 VIDEO MENU RAUDIO 6 OK VOL L A R PR ON/OFF AV L/MON 1 VIDEO 234 5 6 8 7 1 8 235 4 AV2 21FC9 series AV2 21FB2 series MENU 7 R MENU VOL OK PR 4 OK ON/OFF 5 AUDIO 6 VIDEOL/MN PR ON/OFF 123 4 5 8 3 1 PR 8 5 2 VOL 1. 2. 3. 4. 5. MAIN POWER (ON/OFF) switches the set on or off. 6. (AV POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. REMOTE CONTROL SENSOR Note : Only use the supplied remote control handset. (When you use others, they'll be not able to function.) MENU selects a menu. OK accepts your selection rent mode. F / G (Volume or displays the Up/Down) adjusts the volume. adjusts menu settings. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. 6 AUDIO cur- or (or AUDIO-L/R)/VIDEO AV2) (option) IN SOCKETS Connect the audio/video out sockets of external equipment to these sockets. 7. 8. HEADPHONE SOCKET Connect the headphone (option) plug to this socket. EYE (option) adjusts picture according conditions. to the surrounding Note : Shown is a simplified representation of front or side panel. Here shown may be somewhat different from your set. Basic operation On and off 1. 2. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button to switch the set off. again Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket. Programme selection You a can select programme number with the D / E or NUMBER POWER MUTE 1 2 3 4 5 6 7 8 9 0 TV/AV buttons. MENU Volume adjustment Press the F / G button to adjust the volume. PR VOL I/II/ () VOL OK Quick view PR Press the Q.VIEW button to view the were previous programme you () Q.VIEW watching. SSM/ Mute function SOUND Press the MUTE button. The sound is switched off and the display TURBO/ > appears. You can cancel it by pressing the TURBO SOUND button. On screen language selection The menu can be displayed First select your language. 1. MUTE, on the F / G, SSM/*, I/II/*, (option) screen in desired language. Press the MENU button and then D / E button to select the Special menu. 2. Press the G button to select 3. Press the G button and then D / E button to select your desired Language. language. All the 4. will appear in the selected language. Press the OK or F button to select the Special menu. Repeatedly press the MENU button to return to normal TV on screen displays viewing. 7 On screen menus The an between you and your set takes place on screen with menu. The buttons required for the operating steps are dialogue operator also displayed. Menu selection 1. 2. 3. 4. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu. Change the setting of an item in the sub or pull-down menu with F/GorD/E. You to the can move higher level to move to the lower level menu with OK or F button and press the G button. menu Note : In mono models, the Sound menu does not appear. a. b. In some models, Turbo Pic. will not display in the Picture menu. In some models, Turbo.Snd. AVL, Balance, Woofer, X-WAVE c. or Treble, Bass will not display in the Sound menu. d. In some models, Language, Blue back, Game, Booster will not display in the Special menu. , MENU { BG { System Storage { I Prog.Oedit { Normal { DK Favourite { Turbo { M AutoOprog. { Manual ( PR VOL () PR )O}i{OOKOMENU Station VOL OK ( )O}i{OOKOMENU () PSM { TurboOPic. { CSM { Contrast { Brightness { Colour { Sharpness { menu ( { Channel { Fine { Search { Name { { 2 ( )O}i{OOKOMENU )O}i{O OKOMENU Picture SSM { TurboOSnd. { AVL { Balance { Woofer { Treble { Bass { menu OOOOCO1DOOOO5OOSO69 O1OOCO03OOOO6OOSO17 O2OOCO12OOOO7OOSO22 O3OOSO66OOOO8OOCO09 O4OOSO67OOOO9OOCO11 DeleteOOOCopy MoveOOOOOSkip ( )O}i{OOKOMENU ( )O}i{OOKOMENU Sound Clock { OffOtime OnOtime { AutoOoff { menu { ( )O}i{OOKOMENU Time Language Input { BlueOback { ChildOlock { menu { ( )O}i{OOKOMENU Special TV programme 8 Storage System menu Setting numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Up to 100 TV stations Note : In some can be stored TV stations up by programme models up to 200 TV stations Auto programme can O O be stored. tuning OiO O All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. 3. Press the MENU button to select the Station menu. Press the G button and then D / E button to select Auto prog.. Press the G button to display the Auto prog. menu. OiO 4. 5. 6. 7. 8. 9. 1 2 3 4 5 6 7 8 9 O Press the G button. Select a TV system with the D / E button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or F button. Press the D / E button to select Storage. Press the G button. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK button. Press the D / E button to select Normal or Turbo. MENU 0 PR VOL () VOL OK PR () Note : a. Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations. b. If the programmed station has poor quality sound, select the system again in the Manual menu. 10. Press the G button to begin auto programming. Normal {000 0 Turbo OO {0000 OOO OO (Normal search) OOO (Turbo search) All receivable stations are stored. To stop auto programming, press the MENU button. When auto programming is completed, the Prog. edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 11. Repeatedly press the MENU button to return to normal TV viewing. 9 Setting Auto programme scan To automatically scan the pictures of stored programmes, press theD( DD ) or E( E ) button for about 3 seconds. The picture of stored programmes appears on the screen one by one. O O OiO TV stations up E To stop auto programme buttons. scanning, Manual programme tuning press any button except VCR O Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. 2. 3. 1 2 3 4 5 6 7 8 9 MENU OiO 0 4. 5. PR VOL Press the MENU button to select the Station menu. Press the G button and then D / E button to select Manual. Press the G button to display the Manual menu. () VOL OK PR 6. 7. 8. () 9. 10. 11. 12. 13. 14. 15. O Press the D / E button to select Storage. Press the G button to select the programme number. Select the desired programme number (0 to 99) with the F / G button or NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK button. Press the D / E button to select System. Press the G button. Select a TV system with the D / E button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or F button. Press the D / E button to select Channel. Press the G button. Press the D / E button to select V/UHF or Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK or F button. Press the D / E button to select Search. Press the G button. Press the F / G button to commence searching on the Search pull-down menu. If a station is found the search will stop. Press the OK button to store it. The display Stored will appear. Search { 16. To store another station, repeat steps 4 to 15. 17. Repeatedly press the MENU button to return to normal TV viewing. 10 Setting station name the 'Manual programme tuning' steps 1 to 3. Press the D / E button to select Name. Press the G button on the Name pull-down menu. Press the D button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the E button you can select in the opposite direction. Select the position by pressing the F / G button and then take your choice of the second character, and so on. Press the OK button. Repeatedly press the MENU button to return to normal TV Assigning 1. Repeat 2. 3. 4. 5. 6. 7. TV stations up a O O OiO O viewing. Booster (option) In some models, Booster is an optional function. Booster can perform this function. If the Only a set with is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select reception Booster to On. 3. the 'Manual programme tuning' steps 1 to 3. Press the D / E button to select Booster. Press the G button. 4. Press the D / E button to select On 1 2. Repeat pull-down 5. 6. or Off on MENU the Booster PR menu. () Press the OK button. Repeatedly viewing. press the MENU button to return to normal TV VOL VOL OK PR () 11 TV stations up Setting { { { { AutoOprog. Manual Prog.Oedit Favourite ( )O}i{OOKOMENU Programme edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the Station menu. 2. Press the G button and then D / E button to select Prog. edit. Press the G button to display the Prog. edit menu. 3. OOOOCO1DOOOO5OOSO69 O1OOCO03OOOO6OOSO17 O2OOCO12OOOO7OOSO22 O3OOSO66OOOO8OOCO09 O4OOSO67OOOO9OOCO11 DeleteOOOCopy MoveOOOOOSkip 1 2 3 4 5 6 ( )O}i{OOKOMENU Deleting 1. 7 8 9 2. a programme Select a programme to be deleted with the D / E Press the RED button twice. The selected MENU 0 grammes Copying 1. 2. PR () VOL VOL PR () 2. 3. all the F / G button. following F / G button. or All the one a pro- programme Select a programme to be copied with the D / E Press the GREEN button. Moving 1. a are programme is deleted, shifted up one position. or following programmes are shifted down position. programme programme to be moved with the D / E or F / G button. Press the YELLOW button. Move the programme to the desired programme number with Select a theD/EorF/Gbutton. 4. Press the YELLOW button again to release this function. OOOOCO1DOOOO5OOSO69 O1OOCO03OOOO6OOSO17 O2OOCO12OOOO7OOSO22 O3OOSO66OOOO8OOCO09 O4OOSO67OOOO9OOCO11 Move0Off ( )O}i{OMENU programme number Select a programme number to be skipped with the D / E or F / G button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Skipping 1. 2. 3. a Repeatedly 12 press the MENU button to return to normal TV viewing. Setting TV stations up Favourite programme O O This function lets you select your favourite programmes directly. 1. Press the MENU button to select the Station 2. Press the G button and then D / E button to select Favourite. 3. Press the G button to display the Favourite menu. OiO O menu. O 00 O Favourite { OiOOO 4. Press the D / E button to select 5. desired programme with the F / G button. To store another programme, repeat steps 4 to 5. 6. Select You 7. 8. -- -----. a can store up to 8 programmes. Press the OK button. Repeatedly viewing. Repeatedly press the MENU button to return to normal TV MENU press the FAVOURITE button to select stored favourite PR programmes. VOL () VOL OK PR () FAVOURITE 13 Setting TV stations up Calling You the programme table check the programmes stored in the memory the programme table. can Displaying programme table Press the LIST button to display the by displaying Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. OOOOCO1DOOOO5OOSO69 O1OOCO03OOOO6OOSO17 O2OOCO12OOOO7OOSO22 O3OOSO66OOOO8OOCO09 O4OOSO67OOOO9OOCO11 ( )O}i{OOKOMENU Note : a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. PR VOL VOL OK PR programme in the programme table Select a programme with the D / E or F / G button. Then press the OK button. The set switches to the chosen programme number. Selecting () a () LIST Paging through a programme table There are 10 (or 20) programme table pages which contain 100 (or 200) programmes. Pressing the D / E or F / G button repeatedly turns the pages. Press the LIST button to return to normal TV 14 viewing. Picture Note: Picture PSM menu options are adjustment not available for RGB input source. TurboOPic. (Picture Status Memory) CSM Contrast Press the MENU button and then D / E button to select the Picture menu. Press the G button to select PSM. Press the G button and then D / E button to select a picture setting on the PSM pull-down menu. 1. 2. 3. PSM PSM { TurboOPic. { CSM Contrast Brightness C olour Sharpness { { { { { Brightness Colour Sharpness { { { { { { { ( )O}i{OOKOMENU Dynamic Standard Mild Game User ( )O}i{OOKOMENU Press the OK 4. 5. Repeatedly viewing. You or F button. press the MENU button to return to normal TV also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. can CSM You or (Colour Status Memory) can select the bluish, 1. 2. 3. 4. MENU as you picture prefer. colour status; standard, reddish, greenish Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select CSM. Press the G button and then D / E button to select Standard, Reddish, Greenish or Bluish on the CSM pull-down menu. Repeatedly press the MENU button to return to normal TV PR VOL () VOL OK PR () viewing. Picture You 2. PSM adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer. can ness 1. adjustment Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select Contrast, Brightness, Colour or Sharpness. PSM CSM Contrast { { { { Brightness { C olour { { TurboOPic. Sharpness 100 ( )O}i{OOKOMENU 3. Press the G button and then F / G button to make adjustments on the each sub menu. Contrast appropriate 80 ( }i{O)OOKOMENU 4. 5. Press the OK button to store it for the picture user. Repeatedly press the MENU button to return to normal TV viewing. 15 Picture adjustment Eye (option) Eye is an optional function. Only a set with eye option can perform this function. In automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. some models, the set will Press the EYE/* button to switch the eye function on or off. Off When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the ously but condition EYE/ Note a. b. PICTURE TURBO/ If you press the PSM or TURBO PICTURE button with the eye function, the eye function is automatically switched off. EYE function is not available for RGB input source. picture selection When this function is on, the tinct than normal picture. Repeatedly Note (option) picture will be more brilliant and dis- press the TURBO PICTURE button to switch (Turbo Picture off) on or off. (Turbo Picture on) : a. If you press the PSM button with the Turbo picture function, the Turbo picture function is automatically switched off. b. TURBO PICTURE function is not available for RGB input source. 16 in green does not appear continuin yellow appears each time the picture : Turbo PSM display the display changes. Sound adjustment (option) Sound adjustment is an optional function only adjustment can perform this function. SSM You set with sound SSM TurboOSnd. AVL Balance Woofer Treble Bass (Sound Status Memory) can Speech 1. a select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of equalizer. { { { { { { { ( )O}i{OOKOMENU Press the MENU button and then D / E button to select the Sound menu. 2. Press the G button to select SSM. 3. Press the G button and then D / E button to select ting the SSM on pull-down a sound set- menu. SSM { Flat TurboOSnd. AVL Balance Woofer Treble Bass { { { { { { Music Movie Speech User ( )O}i{OOKOMENU MENU Sound Frequency Adjustment Press the G button in User to a. display the User sub menu. Equalizer PR VOL () VOL OK 0.1O0.4O1.0O4.0O10OkHz PR () ()O}{O OKOMENU (RF STEREO, Flat) b. Select Make c. a sound band appropriate by pressing SSM/ the F / G button. sound level with the D / E button. d. Press the OK button to store it for the sound User. Repeatedly You can press the MENU button to return to normal TV also recall a desired sound viewing. (Flat, Music, Movie, Speech or User) with SSM/* button on the remote control. The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. If you press the SSM/* button after making appropriate adjustment on the User sub menu, the display User automatically Note : though you have already set a factory preset setting; Flat, Music, Movie or Speech. appears even 17 Sound SSM TurboOSnd. AVL Balance Woofer Treble Bass { { { { { { { adjustment (option) Sound 1. 2. adjustment Press the MENU button and then D / E button to select the Sound menu. Press the G button and then D / E button to select the desired sound item; AVL (option), Balance, Treble, Bass or Woofer (option). ( )O}i{OOKOMENU 3. 4. Press the G button. Make desired adjustment with the F / on each pull-down menu. G, D / E or OK button SSM { TurboOSnd. { AVL { Balance { Woofer { Treble Bass { { 0 ( )O}i{OOKOMENU 5. MENU X-WAVE You PR VOL Repeatedly viewing. VOL OK PR 1. () 2. 3. () can press the MENU button to return to normal TV (Wireless Sound) (option) also listen to the sound through the FM receiver. Press the MENU button and then D / E button to select the Sound menu. Press the G button and then D / E button to select X-WAVE. Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu. SSM TurboOSnd. AVL Balance Woofer Treble Bass X-WAVE { { { { { { { { Off 87.7 87.9 88.1 88.3 88.5 88.7 88.9 Off 106.7 106.9 or 107.1 107.3 107.5 107.7 107.9 SOUND ( )O}i{OOKOMENU TURBO/ 4. Match the TV's frequency Turbo sound selection and the FM receiver's. (option) When this function is on, the sound will be more emphasized and amplified than normal sound. Repeatedly press the TURBO SOUND button to switch on or off. TURBO (Turbo 18 Sound off) (Turbo Sound on) Sound adjustment (option) Sound output selection (option) In AV mode, you can select output sound for the left and right loud- speakers. press the I/II/* button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- Repeatedly L+R L+L : : R+R : speaker. Audio signal from audio L input is sent to left and right loudspeakers. Audio signal from audio R input is sent to left and right loud-speakers. Stereo/Dual reception (option) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display I/II/ Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/* button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II/* button twice again. for dual language broadcast If a programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* but- Language selection ton repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loud- speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception (option) If your set is with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II/* button repeatedly. 1. 2. 3. equipped When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 19 Time Setting the o 1. oo 2. 3. OiO Setting clock Press the MENU button and then D / E button to select the Time menu. Press the G button to select Clock. Press the G button and then D / E button to adjust the hour. io O oi o oo OiO 4. 5. 6. O Press the G button and then D / E button to adjust the minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Setting the On/Off timer this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function. By using 1. MENU 2. 3. PR Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Off time/On time. Press the G button and then D / E button to adjust the hour. () o VOL VOL OK o io oi o PR () OiO 4. 5. 6. 7. O Press the G button and then D / E button to adjust the minute. Only On time function; Press the G button and then D / E button to adjust programme number and volume level. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Note : a. On time works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, the Clock is reset d. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. . Auto off If you select On on the Auto off pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. 2. 3. 4. 5. 20 Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Auto off. Press the G button and then D / E button to select On or Off on the Auto off pull-down menu. Press the OK or F button. Repeatedly press the MENU button to return to normal TV viewing. Other functions TV and AV modes Inputs be set for TV can cassette recorder or (VCR), AV mode. AV mode is used when or other equipment a Press the MENU button and then D / E Special 2. 3. o is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. o video OiO O button to select the menu. Press the G button and then D / E button to select Press the G button and then D / E button to select AV2), AV3 (option), S-VIDEO (option) (option) on the Input pull-down menu. or or Input. TV, AV (AV1 COMPONENT o 1 2 3 4 5 6 7 8 9 0 TV/AV o OiO AV or AV1 MENU O VCR connected to the Euro scart socket : of the set AV2 : VCR connected to the AV2 sockets of the set or phone jack AV3 : (option) (option) VCR connected to the AV3 sockets of the set S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart socket on the set (option) COMPONENT sockets 4. on Repeatedly : DVD the set Player (option) can select the TV () VOL OK connected to the COMPONENT PR press the MENU button to return to normal TV Alternatively you PR or AV mode by pressing () viewing. the TV/AV button. In AV mode, to return to TV mode, press the D / E or NUMBER but- tons. Auto AV switching (option) If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is automat- ically switched to AV or AV1 mode when an AV signal is you want to keep on watching TV mode, press the D / E buttons. Press the TV/AV button to return to AV modes. input. or But if NUMBER 21 Other functions Child lock o The TV o can be set so control it. This feature that the remote control handset is needed to can be used to prevent unauthorized view- ing. OiO 1. O Press the MENU button and then D / E Special button to select the menu. 3. Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock pull-down menu. 4. Press the OK 5. Repeatedly viewing. 2. or F button. press the MENU button to return to normal TV With the lock on, the display Child lock on appears on the if any button on the panel is pressed while viewing the TV. Note : The display Child lock on will not appear on the screen if any button on the panel is pressed while displaying the menus. MENU Blue back PR VOL (option) () VOL OK PR () If you select On ground appears 1. on on the Blue back pull-down menu, the blue backthe screen when there is no or poor signal. Press the MENU button and then D / E Special button to select the menu. 3. Press the G button and then D / E button to select Blue back. Press the G button and then D / E button to select On or Off on the Blue back pull-down menu. 4. Press the OK 5. Repeatedly viewing. 2. or F button. press the MENU button to return to normal TV Note : In the AV mode, Component mode, the blue doesn't appear on the screen. 22 screen background Other functions Games Game is optional function, only by using the remote control an function 1. (option) 3. 4. set with game can perform o this o handset. Press the MENU button and then D / E Special 2. a button to select the OiO menu. O Press the G button and then D / E button to select Game. Press the G button to enter the game mode. Press the D / E button to select button. You can enjoy the game Note : a. Press the TV/AV or a by using game and then press the OK the GAME owner's manual. MENU button to return to the normal TV viewing. b. If you want a new game, press the RED button to start during the game. MENU Sleep TV/AV timer You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby PR () after the preset time elapses. Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, play 120, 180 and 240. The timer begins to count down from the number - - VOL - PR () of minutes selected. Note : a. To view the SLEEP remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button until the display appears. When you switch the set off, the set releases the preset sleep time. - c. - - 23 Connection of external You can connect additional equipment equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. ANT IN Y LL PB PR DVD INPUT (480i) COMPONENT OUT AV VIDEO (L/MONO) AUDIO (R) IN Aerial socket 1. VCR 2. 3. 4. ANT IN LL Y PB 5. PR DVD INPUT COMPONENT Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on the programme number 0 using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. (480i) OUT AV VIDEO (L/MONO) AUDIO (R) IN Audio/Video in/out sockets 1. VCR 2. 3. R AUDIO L/MON Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV (or AV1), AV 2. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. You VIDEO also record programmes received via audio/video out sockets. can tape AV2 Euro scart socket 1. 2. OK VOL by the TV on video Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. VCR MENU (option) PR /M NO 2 (option) Connect the Euro scart socket of the VCR to the Euro scart socket of the set. Press the PLAY button on the VCR. If your VCR outputs a switching voltage when connected to Euro scart socket, the set will switch to AV (or AV1) mode automatically. But if you want to keep on watching TV mode, press the D / E or NUMBER buttons. VCR Otherwise press the TV/AV button on the remote control handset to select AV (or AV1). The VCR playback picture appears on the screen. You can also record programmes received by the TV on video tape. 1 AV1 ANT IN VCR 24 Note : Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc. Connection of external S-video / Audio in sockets When connecting equipment (S-AV) (option) the S-video socket of the VCR to the S-VIDEO socket of the set, the picture quality will be further improved. ANT IN OUT 75Ω VIDEO (L) - AUDIO -(R) IN 1. Connect the S-video socket of the VCR to the S-VIDEO socket 2. of the set. Connect the audio cable from the VCR to the AUDIO sockets of VCR the set. 3. 4. Select AV3 by pressing the TV/AV button Press the PLAY button on the VCR. The VCR playback picture appears on the repeatedly. screen. Note : If both S-VIDEO and VIDEO sockets have been connected to the VCR simultaneously, only the S-VIDEO can be received. ANT IN 75Ω OUT VIDEO AUDIO IN Component 1. 2. in sockets Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb Pr player or Y B-Y 4. R-Y) of the (Y PB PR) on DVD VCR to the COMPONENT INPUT sockets the set. Connect the audio cable from the DVD sockets of AV 3. (option) to AUDIO IN player (or AV1). Press the TV/AV button to select COMPONENT. Press the PLAY button on the DVD player. ANT IN Y LL Headphone Only playback picture socket appears on a headphone the screen. DVD socket can COMPONENT perform VIDEO (L/MONO) AUDIO (R) IN (option) models which have PR (480i) OUT AV The COMPONENT PB DVD INPUT Player this function. Insert the headphone plug to the headphone socket of the set. You can listen to the sound through the headphones. To adjust the headphone volume, press the F / G button. If you press the MUTE switched off. RAUDIO L/MON button, the sound from the headphone's is VIDEO AV2 OK VOL PR L/MONO 2 25 MEMO Troubleshooting check list Symptoms No picture, no Sound sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only) 27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project