LG L1930SSNT Owner's manual
Add to my manuals23 Pages
LG L1930SSNT is a high-quality display with a 19-inch screen that offers stunning visuals and a user-friendly experience. It features a sleek design with a slim profile that can enhance any workspace. The display provides crisp and clear images with a resolution of 1280 x 1024 pixels, making it suitable for various tasks like文書處理、網頁瀏覽、觀賞影片、玩遊戲。Its adjustable stand allows you to find the perfect viewing angle, ensuring comfort during prolonged use. With multiple connectivity options, you can easily connect it to your computer or other devices.
advertisement
▼
Scroll to page 2
of 23
User's Guide L1530S L1730S L1930S L1930SQ Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service. T T T Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety power cord supplied with the unit. In case you use another power that it is certified by the applicable national standards if not being only the cord, make sure provided by the supplier. If the manufacturer or power cable is faulty in any way, please contact the the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the this manual display only from a power source indicated in the specifications of listed on the display. If you are not sure what type of power supply or you have in your home, consult with your dealer. Overloaded AC outlets and extension cords cords and broken plugs. They technician for replacement. Do not Open the may result in are a dangerous. So are frayed shock or power fire hazard. Call your service Display. There are no user There are serviceable components inside. Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury : place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not To Prevent Fire or Hazards: display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet. Always turn the A1 On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water such basement, as near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat a wet or near a failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. can cause strike the Active Matrix LCD with anything hard damage the Active Matrix LCD permanently. Do not rub mar, or or Do not press the LCD some screen with your finger for a long time as as this may scratch, this may cause afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD On panel. Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. the Connecting Before Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Align the hooks on the stand base with the matching slots in the base of the monitor. 3. Hook Insert the hooks into slots. Removing the stand 1. 2. base Place the monitor with its front To pull remove facing downward on a cushion the stand base, hold the bottom of the stand with the base bottom latch with the other hand, as or soft cloth. one shown in the hand and figure. Bottom Latch Important This illustration depicts the general picture. model of connection. Your monitor may differ from the items shown in the Once you connect the stand base, try not to disconnect it. Do not carry the product upside down holding only the stand base. The fall and get damaged or injure your foot. In order to prevent injury, watch that your sliding door or attaching/detaching a fingers stand are cover. A3 not product caught when moving a may Connecting the Display Using the Computer 1. Open the Sliding Door and remove the Stand Cover. Sliding Door Stand Cover 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. Analog signal * Varies according to model. Wall-outlet PC-outlet type* type* 2 1 PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A4 Connecting 4. the Display Connect the cables as shown in the figure to the cable holder to arrange it neatly. Cable Holder 5. Connect the Stand Cover and then pull down the Sliding Door. Sliding Door Stand Cover 6. Press button on the front switch monitor power is turned on, the 'Self executed automatically. panel to turn the power on. When Image Setting Function' is NOTE ' Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the 'AUTO' button on the front panel of the monitor. Otherwise, you may execute the 'FACTORY RESET' option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'LANGUAGE'. A5 Control Panel Functions Front Panel Controls MENU SET/AUTO LightView + - Bottom Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for 5 seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for 5 seconds. The message "OSD UNLOCKED" should appear. -+ Buttons Use these buttons to select Screen or adjust functions in the On Display. hot LightView DAY NIGHT key This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). ? DAY ? NIGHT : ? TEXT For text ? MOVIE ? PHOTO ? NORMAL : Bright : ambient illumination Dark ambient illumination images (Word processing etc.) images in videos For animation : or : movies For : pictures or drawings operating This is under normal conditions A6 Control Panel Functions Control Function SET/AUTO Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the SET/AUTO button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 15 inch monitor : 1024x768 17 inch monitor : 1280x1024 19 inch monitor : 1280x1024 Power Button Use this button to turn the Power This Indicator (DPMS) Indicator lights display on or up green when the off. display operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. A7 On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the To make display to stabilize for at least 30 minutes before adjustments in the On Screen -+ MENU Display, follow these steps: SET/AUTO Press the MENU Button, then the main To access a becomes control, use highlighted, the making image adjustments. menu -+ MENU of the OSD appears. -+ or Buttons. When the icon you want press the SET/AUTO Button. Use the -+ Buttons to adjust the image to the desired level. Use the / SET/AUTO Button to select other sub-menu items. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. Automatic save With the OSD open, you have made an adjustment the monitor automatically any adjustments you have made, even if you exit the menu or open another menu. If you make an adjustment and then wait for the OSD to disappear, the adjustment will also been saved. once save A8 On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus. Main Sub-menu menu PICTURE Reference BRIGHTNESS To CONTRAST and gamma of the adjust the brightness, contrast screen GAMMA COLOR PRESET 6500K To customize the color of the 9300K screen RED GREEN BLUE POSITION TRACKING SETUP HORIZONTAL To VERTICAL screen CLOCK To adjust the position PHASE improve the clarity stability of the screen LANGUAGE To customize the OSD for HORIZONTAL a user's of the and screen operating status environment POSITION VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET : Adjustable NOTE The order of icons may differ depending on the model (A9~A12). If you set the LIGHTVIEW menu, the PICTURE and COLOR cannot be changed. However, PICTURE and COLOR if NORMAL menu can be menu adjusted. A9 menu will be disabled (default setting) is selected, the On Screen You Display(OSD) were introduced to the Selection and Adjustment procedure of selecting and adjusting an item the OSD using descriptions system. Listed below are the icons, icon names, and icon of the all items shown on the Menu. Press the MENU Menu Name Button, then the main menu of the OSD appears. PICTURE Sub-menus Icons MENU Button + - SET Tip MENU -+ SET : : Exit Adjust (Decrease/Increase) : Enter : Select another sub-menu NOTE OSD (On Screen Display) menu languages on A10 the monitor may differ from the manual. On Screen Main Display(OSD) Selection and Sub menu Adjustment Description menu PICTURE PICTURE MENU - + of the BRIGHTNESS To adjust the brightness CONTRAST To adjust the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values SET screen. contrast of the screen. display high contrast images. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR Select the screen color. 6500K: Slightly reddish white. 9300K: Slightly bluish white. PRESET COLOR ? ? MENU - + RED Set your own red color levels. GREEN Set your own green color levels. Set your own blue color levels. HORIZONTAL To move image left VERTICAL To move image SET BLUE MENU : Exit : Decrease + : Increase SET : Select another sub-menu - POSITION POSITION MENU - + SET MENU : Exit : Decrease + : Increase SET : Select another sub-menu - A11 and right. up and down. On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING To minimize any vertical bars or stripes visible on the screen background.The CLOCK TRACKING horizontal PHASE MENU - + To adjust screen size will also the focus of the change. display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. SET MENU : Exit : Decrease + : Increase SET : Select another sub-menu - SETUP LANGUAGE To choose the control language in which displayed. the names are SETUP OSD To adjust position POSITION on the If the output of the video card is different required specifications, the color WHITE the BALANCE MENU - + of the OSD window screen. level may deteriorate due to video distortion. Using this function, the SET signal signal SETUP level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors MENU - + - : : present in the screen. SET POWER MENU are Exit INDICATOR Adjust Use this function to set the power indicator on the front side of the monitor to ON + : Adjust SET : Select another sub-menu or OFF. If you set OFF, it will go off after 15 seconds. If you set ON at any time, the power indicator will automatically be turned FACTORY on. Restore all factory default settings except "LANGUAGE." Press the button to reset immediately. RESET If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled the input signal is an analog signal. A12 only when Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator green? Adjust the brightness Is the power indicator amber? properly If the the to see if the power cord is connected to the power outlet. display and the contrast. is in power mouse or saving mode, try moving pressing any key on the keyboard bring up the screen. Make sure Try to turn if the power is the PC. on. on Do you see an "OUT OF RANGE" message on the screen? This message appears when the signal from the PC (video card) is out of horizontal or vertical Do you see a "CHECK SIGNAL CABLE This message appears when the signal cable between your PC and your display is not "message on the connected. Check the frequency range of the display. See the 'Specifications' section of this manual and configure your display again. signal cable and try again. screen? Do you see a "OSD LOCKED" message Do you see "OSD LOCKED" when you You MENU button? You push so can secure that they can on the screen? the current control cannot be settings, inadvertently changed. unlock the OSD controls at any time the MENU button for 5 seconds. by pushing The message "OSD UNLOCKED" should appear. A13 Troubleshooting Display image Display is incorrect Position is incorrect. Press the SET/AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. On the screen background, vertical bars or stripes are visible. Press the SET/AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon the on screen display. in Any horizontal noise appearing in any image or characters are not clearly portrayed. automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). The Check if the screen mono or color is abnormal. Press the SET/AUTO button to signal cable is properly connected screwdriver to fasten if necessary. Make sure the video card is properly inserted in and use a the slot. Set the color setting color) The screen blinks. higher than 24 Settings. at Control Panel Check if the screen bits (true - is set to interlace mode and if yes, change it to the recommend resolution. Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. A14 Troubleshooting Have you installed the display Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Make sure to check if the video card supports Plug&Play function. monitor found" message? PICTURE and COLOR menus Are you unable to activated the PICTURE or COLOR menus from the OSD menu? can not be activated from the OSD menu. Ensure that the NORMAL setting is selected for LIGHTVIEW. If LIGHTVIEW is set to DAY TEXT/MOVIE/PHOTO, NIGHT TEXT/MOVIE/PHOTO, the PICTURE and COLOR menus adjustment, A15 will not function. To make set LIGHTVIEW to NORMAL. an L1530S Specifications Display Sync Input Video Input Resolution 15 inches (38.1cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 15 inches viewable 0.297 mm pixel pitch Horizontal 30 Vertical 56 Freq. Freq. - - 63kHz (Automatic) 75Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7Vp-p/75ohm) Max VESA 1024 VESA 1024 Recommend x x 768@75Hz 768@60Hz Plug&Play DDC 2B Power Normal : Consumption Stand-by/Suspend ≤ DPMS Off ≤1W Dimensions Width 36.75 &Weight (with tilt stand) Height Depth 36.67cm / 14.44 inches 18.99 cm / 7.48 inches Net 3.6 Tilt -5˚~30˚ Tilt Range Input 25W 1W cm / 14.47 inches kg (7.94 lbs) Power AC 100-240V~50/60Hz 0.6A Environmental Conditions Operating Conditions Temperature 10˚C to 35 ˚C 10 % to 80 % Humidity non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C 5 % to 95 % non-Condensing Humidity Tilt Stand Signal cable Power cord Attached( ), Detachable ( O ) Attached( ), Detachable ( O ) Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without A16 notice. T L1730S Specifications Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 Sync Input Input Resolution Plug&Play pixel pitch Horizontal 30 Vertical 56 Input Video mm Freq. Freq. Form - - 83kHz (Automatic) 75Hz (Automatic) Separate TTL, Positive/Negative Composite TTL, Positive/Negative SOG (Sync On Green) pin D-Sub Connector Signal Input 15 Input Form RGB Analog (0.7Vp-p/75ohm) Max VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz DDC 2B 43W Power Normal : Consumption Stand-by/Suspend ≤ DPMS Off ≤1W Dimensions Width 39.80 cm &Weight (with tilt stand) Height 40.33 cm Tilt Range Power Input Environmental Conditions Tilt Stand Signal cable Power cord 1W Net / 15.67 inches / 15.88 inches 22.00 cm / 8.66 inches 4.90 kg (10.80 lbs) Tilt -5˚~30˚ Depth AC 100-240V~50/60Hz 1.0A Operating Conditions Temperature 10˚C to 35 ˚C 10 % to 80 % non-Condensing Humidity Storage Conditions Temperature -20˚C to 60 ˚C 5 % to 95 % non-Condensing Humidity Attached( ), Detachable ( O ) Attached( ), Detachable ( O ) Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without A17 notice. T L1930S Specifications Display /L1930SQ T 19 inches (48.18cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294mm Sync Input 30 Vertical 56 Input Video Input Resolution Plug&Play pixel pitch Horizontal Freq. Freq. Form - - 83kHz (Automatic) 75Hz (Automatic) Separate TTL, Positive/Negative Composite TTL, Positive/Negative SOG (Sync On Green) pin D-Sub Connector Signal Input 15 Input Form RGB Analog (0.7Vp-p/75ohm) Max VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz DDC 2B 45W Power Normal : Consumption Stand-by/Suspend ≤ DPMS Off ≤1W Dimensions Width 44.44 cm &Weight (with tilt stand) Height 43.83 cm Tilt Range Net / 17.50inches / 17.25 inches 50.83 cm / 20.01 inches 8.3 kg (18.29 lbs) Tilt -5˚~30˚ Depth Swivel Power Input Environmental Conditions 1W 300˚ AC 100-240V~50/60Hz 1.0A Operating Conditions Temperature 10˚C to 35 ˚C 10 % to 80 % non-Condensing Humidity Storage Conditions Temperature -20˚C to 60 ˚C 5 % to 95 % non-Condensing Humidity Tilt Stand Attached( ), Detachable ( O ) Signal cable Attached( ), Detachable ( O ) Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without A18 notice. Specifications Preset Modes (Resolution) 15 inch monitor Display Modes (Resolution) 123456789 10 11 12 13 14 VGA VGA VGA VESA VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA Horizontal Freq. (kHz) 31.468 31.468 31.469 35.000 37.861 37.500 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 Vertical Freq. (Hz) 70 70 60 66.67 72.8 75 56.25 60 72 75 75 60 70 75 17 inch monitor Display Modes (Resolution) 123456789 10 11 12 13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA Horizontal Freq. (kHz) 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 A19 Vertical Freq. (Hz) 70 70 60 75 60 75 75 60 75 75 65 60 75 Specifications Preset Modes (Resolution) 19 inch monitor Display Modes (Resolution) 123456789 10 11 12 13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA Horizontal 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 Indicator MODE LED Color Normal green Stand-by/Suspend amber DPMS Off amber Freq. (kHz) A20 Vertical Freq. (Hz) 70 70 60 75 60 75 75 60 75 75 65 60 75 How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications. 1. Remove the Sliding Door and Stand Cover. Sliding Door Stand Cover 2. Please the monitor front side 3. Separate 4. on a piece of cloth downward. the stand base using or other soft surface with the facing Install the VESA standrad wall a screwdriver as shown in the picture. mounting. VESA wall mounting Connected to another and wall-mounted object (stand type type. This monitor VESA-compliant mounting pad.-optional) For further information, refer to the VESA Wall Mounting Instruction Guide. accepts a interface Kensington Security Slot- optional a locking cable that can be purchased separately at most computer Connected to stores A21 Digitally yours
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project